7/31/2019 Spiral Rings

1/16

Friendly Plastic... Spiral Rings

STEP-BY-STEPWITH Jana Ewy

7/31/2019 Spiral Rings

2/16

Cut desired colors Friendly Plastic into 1/4 x 3 strips.

Cut a silicone baking sheet liner into 3/4 x 4 1/2 strips.

Find a cylinder that is the approx. circumference of your

finger.

1

7/31/2019 Spiral Rings

3/16

Place the silicone strips onto the per-heated griddle.

Center and position the plastic strips along one edge of thesilicone strips. Allow the plastic to soften.

Tip: If the ends of the plastic start to curl... lightly press them down onto

the silicone strip.

2

7/31/2019 Spiral Rings

4/16

One at a time... remove the silicone strip from the griddle.

Holding on to one end, position the silicone strip at aslight angle on the cylinder.3

7/31/2019 Spiral Rings

5/16

7/31/2019 Spiral Rings

6/16

Securely hold on to the end of the silicone strip as you dip

the cylinder into a bowl of ice cold water.

Hold under the water for a minute or two, while the

plastic hardens.

5

7/31/2019 Spiral Rings

7/16

Remove from the water and slide the cylinder out.6

7/31/2019 Spiral Rings

8/16

Next remove the silicone strip.7

7/31/2019 Spiral Rings

9/16

Dry the ring off using a paper towel.8

7/31/2019 Spiral Rings

10/16

Repeat the process for each ring.9

7/31/2019 Spiral Rings

11/16

For a bit of added charm... attach a dangle.

Using a 1/16 hole punch... punch a hole through thering.

10

7/31/2019 Spiral Rings

12/16

Create a loop using a head pin.11

7/31/2019 Spiral Rings

13/16

Choose your desired dangles.

A mix of beads and tiny charms, are perfect for this.12

7/31/2019 Spiral Rings

14/16

Attach the dangles using a jump ring.13

7/31/2019 Spiral Rings

15/16

Plain or fancied up, these are as much fun to wear as

they are to make.14

7/31/2019 Spiral Rings

16/16

for Friendly Plastic Designer Sticks and related supplies, visit:

the riendl Plastic supply store

STEP-BY-STEPWITH Jana EwyTOOLS & MATERIALS

Acrylic ruler

Cutting Matte

Friendly Plastic; 1/4 x 3 strip

Hole punch; 1/16

Griddle: (set at 200-250 degrees)

Jewelry tools, charms and beads

Matte knife

Scissor

Silicone baking matte; 3/4x 4 1/2

http://friendlyplastic.etsy.com/http://friendlyplastic.etsy.com/http://friendlyplastic.etsy.com/http://friendlyplastic.etsy.com/