spine screw removal systemsynthes.vo.llnwd.net/o16/llnwmb8/us mobile/synthes north...03.611.051...
TRANSCRIPT
-
– General Instrument Set
– Posterior ThoracolumbarInstrument Set
– Cervical and AnteriorThoracolumbar Instrument Set
Spine Screw Removal System.Three comprehensive instrument sets forremoving spine screw implants.
Instruments and implantsapproved by the AO Foundation
-
Spine Screw Removal System
General Instrument Set(01.611.002)
Synthes Spine Spine Screw Removal System
Posterior ThoracolumbarInstrument Set (01.611.020)
Cervical and AnteriorThoracolumbar Instrument Set(01.611.010)
Note: It is recommended that producttechnique guides be reviewed before re-vising or removing spine screw implants.
-
Synthes Spine 1
A comprehensive instrument set for removing spine screwimplants in any condition.
Graphic Case690.099 for Spine Screw Removal Set
General Instrument Set (01.611.002)
Broken Screw Removers03.611.014 4.0 mm 03.611.015 5.0 mm03.611.016 6.0 mm
03.611.017 7.0 mm03.611.018 8.0 mm03.611.019 9.0 mm
Remove screws with damaged drive recess
03.611.031
03.611.017
Trephines03.611.004 4.0 mm03.611.005 5.0 mm03.611.006 6.0 mm
03.611.007 7.0 mm03.611.008 8.0 mm03.611.009 9.0 mm
03.611.007
Flat Blades03.611.050 Small03.611.051 Medium
Remove screws with slotted drive03.611.051
Setscrew Extractors03.611.030 1.5 mm03.611.031 2.5 mm03.611.032 3.0 mm, short
03.611.033 3.0 mm, long03.611.034 3.5 mm03.611.035 4.0 mm
Remove screws which no longer have a head
Clear bone and soft tissue from around damaged screws
-
2 Synthes Spine Spine Screw Removal System
General Instrument Set (01.611.002) continued
Hex Drivers, female03.611.121 5.0 mm03.611.122 6.0 mm03.611.123 7.0 mm03.611.124 8.0 mm03.611.125 9.0 mm03.611.126 10.0 mm
03.611.131 1/8 inch03.611.132 5/32 inch03.611.133 3/16 inch03.611.134 7/32 inch03.611.135 1/4 inch03.611.136 5/16 inch03.611.137 3/8 inch03.611.138 7/16 inch03.611.139 1/2 inch
Remove screws with hexagonal head
03.611.121
Hex Drivers, male03.611.101 2.5 mm03.611.102 3.0 mm03.611.103 3.5 mm03.611.104 4.5 mm03.611.105 5.0 mm03.611.107 7.0 mm
03.611.111 7/64 inch03.611.112 1/8 inch03.611.113 5/32 inch03.611.114 3/16 inch03.611.115 7/32 inch03.611.116 1/4 inch
Remove screws with hexagonal recess
03.611.105
Extenders03.611.054 Square coupling03.611.059 6 mm hex coupling03.611.058 AO coupling
03.611.058
03.611.059
03.611.054
Note: All drivers have a 1/4” square coupling for use withdrive extenders 03.611.054, 03.611.058 and 03.611.059
Hexalobe Drivers, male03.611.142 T20 03.611.143 T25
03.611.144 T3003.611.145 T40
Remove screws with an intact hexalobe drive03.611.143
Quarter-inch square drive shafts compatible with handleswhich have 6 mm hex, AO, or 1/4” square couplings
-
Synthes Spine 3
Custom Drivers03.611.063 Conical Removal Driver
for Click’X Locking Cap 03.611.071 5.0 mm Saddle Driver 03.611.072 6.0 mm Saddle Driver03.611.076 11 mm Hex Driver,
12 point03.611.077 13.8 mm Hex Driver,
female03.611.080 Sleeve Nut Driver03.611.081 2-Prong Driver03.611.082 3-LOK Driver03.611.083 Pentalobe Driver03.611.084 Cap Nut Driver03.611.091 Cruciform Driver03.611.092 Octagon Driver03.611.093 4-Prong Driver03.611.094 Anchor Driver
A selection of drivers to remove a variety of spine screw implants
03.611.063 03.611.071
03.611.072 03.611.076
03.611.077 03.611.080
03.611.081 03.611.082
03.611.083 03.611.09103.611.084
03.611.092 03.611.093 03.611.094
-
4 Synthes Spine Spine Screw Removal System
Handles03.611.052 Ratchet T-Handle, square coupling03.611.053 Multiaxial Handle, square coupling388.396 Handle, with quick coupling, small
388.39603.611.052
03.611.053
Countertorques03.611.056 Narrow03.611.057 Wide
03.611.057
03.611.056
Wrenches03.611.061 1/4 inch –3/8 inch03.611.062 7/32 inch –9/32 inch 03.611.062
Adjustable Pliers03.611.055 Adjustable Pliers
General Instrument Set (01.611.002) continued
-
Synthes Spine 5
Posterior Thoracolumbar Instrument Set (01.611.020)
A comprehensive instrument set for removing screws fromany Synthes Spine posterior thoracolumbar implant system.
Graphic Case690.280 for Posterior Thoracolumbar Screw Removal
Instrument Set
Socket Wrenches388.14 with straight handle, 6 mm388.158 with L-handle, for 12 point nut, 11 mm
11 mm and 6 mm socket sizes for use on USS Locking Nutand Fracture Clamp
388.158
Handles388.274 Tap Handle (USS, 6 mm hex coupling) 388.652 Ratchet T-Handle, 6 mm hex coupling388.653 Ratchet Handle, with 5 mm drive
Handles compatible with 5 mm and 6 mm hex coupling
388.652
-
6 Synthes Spine Spine Screw Removal System
Posterior Thoracolumbar Instrument Set (01.611.020) continued
Screwdrivers03.620.003 StarDrive Screwdriver Shaft, T25, 6 mm hex
coupling313.892 3.0 mm Hexagonal Screwdriver Shaft , 6 mm
hex coupling314.57 Small Hexagonal Screwdriver, long388.079 3.5 mm Hexagonal Screwdriver Shaft, 6 mm
hex coupling 388.33 Screwdriver, for side-opening Implants 388.337 4.0 mm Hexagonal Screwdriver Shaft, 5 mm
hex coupling 389.224 3.5 mm Hexagonal Screwdriver 396.303 Footed Screwdriver Shaft, 6 mm hex coupling
Extractors309.540 Click’X Locking Cap Extractor309.541 Countertorque Sleeve, for Click’X Locking
Cap Extractor321.20 Ratchet Wrench, 11 mm388.353 Extraction Pliers for Click’X388.357 Locking Ring Extractor, for USS Variable Angle
Screws388.756 Locking Ring Extractor
388.337
388.756
A selection of screwdrivers compatible with Click’X, Click’XMonoaxial, Pangea, USS, USS Dual Opening, USS SmallStature, USS VAS, and VAS I and II
-
Synthes Spine 7
Reference chart for removal of Synthes posterior thoracolumbar spine systems
System Part No. DescriptionClick’X 388.079 3.5 mm Hexagonal Screwdriver Shaft, 6 mm hex coupling
309.540 Click’X Locking Cap Extractor309.541 Countertorque Sleeve, for Click’X Locking Cap Extractor321.20 Ratchet Wrench, 11 mm across flats388.353 Extraction Pliers for Click’X388.274 Universal Spinal System Tap Handle388.652 Ratchet T-Handle, 6 mm hex coupling314.57 Small Hexagonal Screwdriver, long
Click’X Monoaxial 388.079 3.5 mm Hexagonal Screwdriver Shaft, 6 mm hex coupling309.540 Click’X Locking Cap Extractor309.541 Countertorque Sleeve, for Click’X Locking Cap Extractor321.20 Ratchet Wrench, 11 mm across flats396.303 Footed Screwdriver Shaft, 6 mm hex coupling388.274 Universal Spinal System Tap Handle388.652 Ratchet T-Handle, 6 mm hex coupling314.57 Small Hexagonal Screwdriver, long
Pangea 03.620.003 StarDrive Screwdriver Shaft, T25, 6 mm hex coupling388.652 Ratchet T-Handle, 6 mm hex coupling314.57 Small Hexagonal Screwdriver, long
USS 388.158 Socket Wrench with L-Handle, for 12 point nut, 11 mm across flats388.33 Screwdriver, for side-opening implants314.57 Small Hexagonal Screwdriver, long
USS Dual Opening 388.158 Socket Wrench with L-Handle, for 12 point nut, 11 mm across flats388.337 4.0 mm Hexagonal Screwdriver Shaft, 5 mm hex coupling388.653 Ratchet Handle, with 5.0 mm drive314.57 Small Hexagonal Screwdriver, long
Small Stature USS 388.158 Socket Wrench with L-Handle, for 12 point nut, 11 mm across flats388.337 4.0 mm Hexagonal Screwdriver Shaft, 5 mm hex coupling388.653 Ratchet Handle, with 5.0 mm drive314.57 Small Hexagonal Screwdriver, long
USS Fracture 388.158 Socket Wrench with L-Handle, for 12 point nut, 11 mm across flats388.14 Socket Wrench with straight handle, 6 mm across flats
USS VAS 313.892 3.0 mm Hexagonal Screwdriver Shaft, 6 mm hex coupling388.652 Ratchet T-Handle, 6 mm hex coupling388.158 Socket Wrench with L-Handle, for 12 point nut, 11 mm across flats388.274 Universal Spinal System Tap Handle388.357 Locking Ring Extractor, for USS VAS 314.57 Small Hexagonal Screwdriver, long
VAS I and II 388.158 Socket Wrench with L-Handle, for 12 point nut, 11 mm across flats388.756 Locking Ring Extractor389.224 3.5 mm Hexagonal Screwdriver314.57 Small Hexagonal Screwdriver, long
-
8 Synthes Spine Spine Screw Removal System
Cervical and Anterior Thoracolumbar Instrument Set (01.611.010)
A comprehensive instrument set for removing screws fromany Synthes Spine cervical and anterior thoracolumbar implant system.
Graphic Case690.281 for Cervical and Anterior Thoracolumbar
Screw Removal Instrument Set
Screwdrivers03.620.002 StarDrive Screwdriver Shaft, T25, long313.843 2.0 mm Screwdriver Blade, self-retaining,
StarDrive, long314.57 Small Hexagonal Screwdriver, long 324.07 Screwdriver Shaft, for expansionhead screws
(4.0 mm/4.35 mm)352.311 Extraction Screwdriver387.282 Screwdriver for expansionhead screws, self-
retaining 387.284 Screwdriver for locking screws, self-retaining387.285 1.8 mm Screwdriver Shaft, self-retaining, for
Titanium Locking Screws387.686 StarDrive Screwdriver Shaft, T15, quick
coupling388.032 3.5 mm/4.0 mm StarDrive Screwdriver, self-
retaining389.829 3.5 mm Hexagonal Screwdriver Shaft, 6 mm
hex coupling
324.07
A selection of screwdrivers compatible with BLP, ATB, TSLP,CerviFix, CSLP, ARCH Fixation, StarLock, ACLP, ATLP, ACCS,Axon, Vectra, Vectra-T, and VentroFix
Note: For additional information, please refer to package insert.
For detailed cleaning and sterilization instructions, please refer tohttp://us.synthes.com/Medical+Community/Cleaning+and+Sterilization.htmor to the below listed inserts, which will be included in the shipping container:—Processing Synthes Reusable Medical Devices—Instruments, Instrument Trays
and Graphic Cases—DJ1305—Processing Non-sterile Synthes Implants—DJ1304
-
Synthes Spine 9
Socket Wrench388.031 Socket Wrench, 5.5 mm width across flats
5.5 mm socket wrench for StarLock and CerviFix screws
Handles311.43.99 Handle, with quick coupling311.03 Handle, with mini quick coupling, small388.652 Ratchet T-Handle, 6 mm hex coupling388.396 Handle, with quick coupling, small
388.396
Removal/Release Tools388.035 Clamp Removal Tool388.548 Release Tool
Compatible with StarLock, CerviFix, and Axon screw implants
388.548
Countertorque324.067 Countertorque Wrench (CSLP)
Quick-connect handles compatible with a variety of screw-driver shafts
-
10 Synthes Spine Spine Screw Removal System
Cervical and Anterior Thoracolumbar Instrument Set (01.611.010) continued
Extractors03.600.001 Conical Extraction Screw, for 5.5 mm locking
screws387.34 Conical Extraction Screw
03.600.001
Cleaning Tool324.071 Screw Head Cleaning Tool
Used to clean drive recess of ACCS or Vectra screws
Conical screw extractors for the removal of TSLP, ATB, ACCS,Vectra, and Vectra-T screws with damaged drive recesses
-
Synthes Spine 11
Reference chart for removal of Synthes cervical and anterior thoracolumbar spine systems
System Part No. DescriptionArch Fixation 311.03 Handle, with mini quick coupling, small
313.843 2.0 mm Screwdriver Blade, self-retaining, StarDrive, long
CerviFix 314.57 Small Hexagonal Screwdriver, long
StarLock 388.031 Socket Wrench, 5.5 mm width across flats388.032 3.5 mm/4.0 mm StarDrive Screwdriver, self-retaining388.035 Clamp Removal Tool
ACCS 324.071 Screw Head Cleaning Tool352.311 Extraction Screwdriver
ACLP 387.686 StarDrive Screwdriver Shaft, T15, quick coupling388.396 Handle, with quick coupling, small
Axon 387.686 StarDrive Screwdriver Shaft, T15, quick coupling388.396 Handle, with quick coupling, small314.57 Small Hexagonal Screwdriver, long388.548 Release Tool
Vectra, Vectra-T 324.071 Screw Head Cleaning Tool352.311 Extraction Screwdriver
CSLP 387.282 Self-Retaining Screwdriver, for expansionhead screws 387.284 Self-Retaining Screwdriver, for locking screws 387.34 Conical Extraction Screw388.396 Handle, with quick coupling, small324.067 Countertorque Wrench
BLP 387.282 Self-Retaining Screwdriver, for expansionhead screws387.284 Self-Retaining Screwdriver, for locking screws387.34 Conical Extraction Screw324.07 Screwdriver Shaft, for expansionhead screws (4.0 mm/4.35 mm) 388.396 Handle, with quick coupling, small311.43.99 Handle, with quick coupling
ATB 389.829 3.5 mm Hexagonal Screwdriver Shaft, 6 mm hex coupling03.600.001 Conical Extraction Screw, for 5.5 mm locking screws388.652 Ratchet T-Handle, 6 mm hex coupling
TSLP 389.829 3.5 mm Hexagonal Screwdriver Shaft, 6 mm hex coupling03.600.001 Conical Extraction Screw, for 5.5 mm locking screws388.652 Ratchet T-Handle, 6 mm hex coupling
VentroFix 389.829 3.5 mm Hexagonal Screwdriver Shaft, 6 mm hex coupling03.600.001 Conical Extraction Screw, for 5.5 mm locking screws388.652 Ratchet T-Handle, 6 mm hex coupling
ATLP 389.829 3.5 mm Hexagonal Screwdriver Shaft, 6 mm hex coupling03.600.001 Conical Extraction Screw, for 5.5 mm locking screws388.652 Ratchet T-Handle, 6 mm hex coupling
-
Synthes Spine1302 Wrights Lane EastWest Chester, PA 19380Telephone: (610) 719-5000To order: (800) 523-0322Fax: (610) 251-9056
Synthes (Canada) Ltd.2566 Meadowpine BoulevardMississauga, Ontario L5N 6P9Telephone: (905) 567-0440To order: (800) 668-1119Fax: (905) 567-3185
© 2006 Synthes, Inc. or its affiliates. ACCS, ACLP, ARCH, Axon, CerviFix, Click’X, Pangea, Vectra, Vectra-T, and Synthes are trademarks of Synthes, Inc. Printed in U.S.A. 10/10 J6272-C
www.synthes.com