spill response kits - enretech · large transport spill kit (hanging bag) enr092 absorbent...

2
PO Box 1154 Moss Vale, NSW Australia 2577 T 61 2 4869 3261 F 61 2 4869 3264 [email protected] www.enretech.com.au Workshop Spill Kit Suitable For: Oils & Fuels, Oil-based Liquids & DG Class 3 Flammable Liquids KIT COMPONENT SIZE PART NO. NUMBER/KIT KleenSweep 5 kg Bag ENR022 3 Absorbent Containment Socks (Oil Only) 1.2m x 10 cm dia. ENR040 2 Absorbent Cotton Pads (Oil Only) 45cm sq x 200gsm ENR047 20 Low Lint Absorbent Wipes 33cm x 59cm ENR045 50 Instruction Card & Selection Chart A4 CARD/HYD 1 Scoop (yellow) 500g HCHY40 1 LDPE Disposal Bags + ties 450 x 710mm D/BAG 2 Security Seal (tear off ) - SEAL1 2 Workshop Kit Label Set (Black) Set of 4 LBL/WSK 1 Wheelie Bin (yellow) 120L MGB120Y 1 PVC Gloves wrist GP27 1 pair Absorption Capacity (oil) 100 Litres Use kit only if suitably trained. Principle routes of exposure will vary on type of liquid. Respiratory protection may be required for cleaning up larger spills. Use spark-proof tools when cleaning all DG Class 3 spills. Not suitable for use on strong oxidisers. Meets Australian Standard AS 1940-2004 Combustible Liquids: C1 & C2 This kit is suitable for cleaning spills on hard surfaces which involve the following liquids: Fuels & Lubes Hydraulic Oils Coolants (undiluted) Solvents (ketones, halocarbons, alcohols, etc.) Paints (oil-based) Drying Oils (linseed, pine oil, etc.)(1) Pesticides (solvent based) Vegetable Oils or Animal Fats DG Class 3 Flammables Important Note: All Enretech Spill Response Kits are supplied with only basic Personal Protective Equipment. Each user may wish to supplement the PPE in their kits based on the chemical spill risks identified at their sites through audits and risk assessments. Supplemental PPE and Spill Kit replenishment parts can be sourced throughout Australia. Contact Enretech for more information. For spills involving liquids not listed above, please refer to the Enretech Spill Safety Guide (available on www.enretech.com.au). When used for liquid spill clean-up, sorbents tend to take on the characteristics of the liquid they have absorbed. Thus, always consult the MSDS of the spilled liquid prior to absorption with Enretech sorbents. Notes: (1) Drying oils can have high risk of spontaneous combustion. Take appropriate precautions. Health, safety & environmental risks from Dangerous Goods Liquids can vary considerably. In general, Enretech spill kits can be used for many DG Liquids, however seek help for all spills involving Packing Group I DG Liquids. Contact Enretech Australasia (0425 232 741) for further technical assistance, as required. Part No. ENR090 Workshop Spill Kit SIZE: 120L wheelie bin PALLET QUANTITY: 6 bins per pallet ABSORBS: 100L Oil Also Available: Large Workshop Kit Service Station Kit Marine Kit Spill Response Kits

Upload: others

Post on 30-Sep-2020

30 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Spill Response Kits - Enretech · Large Transport Spill Kit (Hanging Bag) ENR092 Absorbent Containment Socks & Pillows (Oil Only & GP) Absorb/Contain Socks 1.2m x 10cm dia. - 2 per

PO Box 1154 Moss Vale, NSW Australia 2577T 61 2 4869 3261 F 61 2 4869 3264 [email protected] www.enretech.com.au

Workshop Spill KitSuitable For: Oils & Fuels, Oil-based Liquids & DG Class 3 Flammable Liquids

KIT COMPONENT SIZE PART NO. NUMBER/KIT

KleenSweep 5 kg Bag ENR022 3

Absorbent Containment Socks (Oil Only) 1.2m x 10 cm dia. ENR040 2

Absorbent Cotton Pads (Oil Only) 45cm sq x 200gsm ENR047 20

Low Lint Absorbent Wipes 33cm x 59cm ENR045 50

Instruction Card & Selection Chart A4 CARD/HYD 1

Scoop (yellow) 500g HCHY40 1

LDPE Disposal Bags + ties 450 x 710mm D/BAG 2

Security Seal (tear off ) - SEAL1 2

Workshop Kit Label Set (Black) Set of 4 LBL/WSK 1

Wheelie Bin (yellow) 120L MGB120Y 1

PVC Gloves wrist GP27 1 pair

Absorption Capacity (oil) 100 Litres

Use kit only if suitably trained. Principle routes of exposure will vary on type of liquid.

Respiratory protection may be required for cleaning up larger spills. Use spark-proof tools when

cleaning all DG Class 3 spills.

Not suitable for use on strong oxidisers. Meets Australian Standard AS 1940-2004

Combustible Liquids: C1 & C2

This kit is suitable for cleaning spills on hard surfaceswhich involve the following liquids:■ Fuels & Lubes

■ Hydraulic Oils

■ Coolants (undiluted)

■ Solvents (ketones, halocarbons, alcohols, etc.)

■ Paints (oil-based)

■ Drying Oils (linseed, pine oil, etc.)(1)

■ Pesticides (solvent based)

■ Vegetable Oils or Animal Fats

■ DG Class 3 Flammables

Important Note: All Enretech Spill Response Kits are supplied with only basic Personal Protective Equipment.

Each user may wish to supplement the PPE in their kits based on the chemical spill risks identified at their

sites through audits and risk assessments. Supplemental PPE and Spill Kit replenishment parts can be

sourced throughout Australia. Contact Enretech for more information.

For spills involving liquids not listed above, please refer to the Enretech Spill Safety Guide (available on www.enretech.com.au).When used for liquid spill clean-up, sorbents tend to take on the characteristics of the liquid they have absorbed. Thus, always consult the MSDS ofthe spilled liquid prior to absorption with Enretech sorbents.

Notes: (1) Drying oils can have high risk of spontaneous combustion. Take appropriate precautions.

Health, safety & environmental risks from Dangerous Goods Liquids can vary considerably. In general, Enretech spill kits can be used for many DG Liquids, however seek help for all spills involving Packing Group I DG Liquids. Contact Enretech Australasia (0425 232 741) for further technicalassistance, as required.

Part No. ENR090Workshop Spill KitSIZE: 120L wheelie binPALLET QUANTITY: 6 bins per palletABSORBS: 100L Oil

Also Available:Large Workshop KitService Station KitMarine Kit

Spill Response Kits

Page 2: Spill Response Kits - Enretech · Large Transport Spill Kit (Hanging Bag) ENR092 Absorbent Containment Socks & Pillows (Oil Only & GP) Absorb/Contain Socks 1.2m x 10cm dia. - 2 per

PO Box 1154 Moss Vale, NSW Australia 2577T 61 2 4869 3261 F 61 2 4869 3264 [email protected] www.enretech.com.au

KleenSweep (Premium Floor Sweep)KleenSweep 5kg bag Absorbs 17L (Oil)Product Code: ENR020For oil/fuel spills + wide variety of liquids. Dries the floor in 1 simple step - no secondaryclean up required. Superior performanceandlower cost of use. Industry accredited. Tested to 12 performance and safety standards. Made from 97% recycled, organic fibres. 100% biodegradable. Low dust formula.

Also Available:Compact Spill Kit (20L pail + scoop) ENR10620L Pail KleenSweep Absorbent ENR02110kg bag KleenSweep Absorbent ENR022

Cotton Sponge™ Absorbent Pads (Oil Only)Cotton Sponge™ Pads 200/ctn450mm x 450mm x 200gsmCarton absorbs 152L (Oil)*Product Code: ENR047Superior performance and lower cost of naturalcotton fibres. Pads absorb up to 50% more thanequivalent poly pads (single use). Absorbs a wide range of hydrocarbons. Meets all criteria for Sustainable Product purchasing. Tested to 12 performance and safety standards. Biodegradable in landfill or biofarm.

Also Available:Thick Pads: 400 gsm x 450 x 450mm (100/ctn) ENR048Rolls: 200 gsm x 1m x 50m ENR046Tuff Sucker Pads: 350gsm x 450 x 450mm (200/ctn) ENR049Tuff Sucker Roll: 350gsm x 1m x 50m ENR044

Transport Spill Response KitTransport Spill KitDuffle Bag Absorbs 45L (Oil)*Product Code: ENR091Contains Enretech sorbents, PPE andclean-up accessories for fast & safe spillresponse. Convenient compact orangenylon carry bag. Fits behind seat in mosttrucks. Individual refill items available.Combines both pads & particulate forquick & complete clean-up. No residuesremain. Complies with State/FederalEPA & OHS Regulations & Codes of Practice.

Also Available:Large Transport Spill Kit (Hanging Bag) ENR092

Absorbent Containment Socks & Pillows (Oil Only & GP)Absorb/Contain Socks1.2m x 10cm dia. - 2 per ctnProduct Code ENR040Absorb/Contain Pillows350mm x 350mm - 5 per ctnProduct Code: ENR035Cost effective & rapid oil or fuelcontainment & absorption. Also availablein GP form for water-based liquids.Highly absorbent, picks up 19 times itsown weight (oil)*. Made from 100%recycled materials. 100% biodegradable.

Also Available:Absorb/Contain Socks: 2.4m x 10cm dia. - 5 per ctn ENR041Absorb/Contain Socks: 3.0m x 10cm dia. - 5 per ctn ENR043

Service Station Spill Response KitService Station Spill Kit120L Wheelie BinAbsorbs 100L (Oil)*Product Code: ENR100Mobile kit for fast response. Highly visible &easy to use. Contains Enretech sorbents,Protective Equipment and clean-up accessories.Combines both pads & particulate for quick & complete clean-up. No residues remain.Individual refill items available. Complies withState/Federal EPA & OHS Regulations & Codesof Practice. Effective on a wide range of liquids.Kits can be customised to suit risk.Industry accredited. Sorbents tested to12 standards.

Enretech Absorbent WipesAbsorbent Wipes (50/pk)Product Code: ENR045Ideal for wide range of application.Extremely low lint. Exceptional strength anddurability. 330mm x 590mm dimensions.Can be used wet, dry or in between. White, non-woven spun-laced. 100% viscose

Workshop Spill Response KitWorkshop Spill Kit120L Wheelie BinAbsorbs 100L (Oil)*Product Code: ENR090Mobile kit for fast spill response. Highly visible.Contains Enretech sorbents, ProtectiveEquipment and clean-up accessories.Individual refill items available. Combines bothpads & particulate for quick & completeclean-up. No residues remain. Complies withState/Federal EPA & OHS Regulations & Codes of Practice.

Also Available:240L Large Workshop Spill Kit ENR101120L Universal Spill Kit ENR089120L Hazchem Spill Kit ENR095

Spill Control Products