spill response3m™ emergency spill response kits be prepared for a spill emergency 3m emergency...

Spill Response

PRODUCT CATALOGUE

Helping to protect your way of life.

3M™ Sorbent Configurations3M™ Sorbent Booms3M Sorbent Booms are used to stop the spread of a spill and are the first line in spill containment. Once you have booms in place you can then use pads, rolls or pillows to recover the spilt liquids. Booms will also recover large amounts of liquids. Booms are available in Oil & Petroleum, Chemical & Universal and General Purpose versions.

3M™ Sorbent Pads3M Sorbent Pads are used to clean up and recover spilt liquids. Pads are used like a wipe and are very versatile for getting at hard to reach areas. Pads may also be left on a spill area to soak up spilt liquids. Pads are available in Oil & Petroleum, Chemical & Universal and General Purpose versions.

3M™ Sorbent Rolls3M Sorbent Rolls are used to clean up and recover spilt liquids. Rolls give you the ability to use the exact amount of sorbent required. You can leave required amounts of sorbent on the spill, to soak up larger areas. They can also be used as matting in dirty areas or where contamination is an issue. Rolls are available in both Oil & Petroleum and Chemical & Universal versions.

3M™ Sorbent Pillows3M Sorbent Pillows are used to clean up and recover spilt liquids in hard to reach areas such as bilge pumps, drains, sumps and holding tanks. Pillows are available in both Oil & Petroleum and Chemical & Universal versions.

3M™ Folded SorbentsThe unique 3M Folded Sorbents are 4 products in one. Able to be used as a boom, sheet, pad, or pillow, this allows one product to be stocked for almost any liquid spill. Perforations every 40cm permit the required length of sorbent to be selected so there is no waste. The handy dispenser allows easy on site or off site use and can be wall mounted. No need to handle messy clay products that can be dusty, 3M Folded Sorbents are clean, lightweight and offer superior value.

3M™ Emergency Spill Response KitsBe prepared for a Spill Emergency3M Emergency Spill Response Kits are the best way to protect against unexpected spills that can happen anywhere at anytime. 3M Kits give you the ability to have the response materials close to any potential hazard area. This enhances your ability to contain spills quickly and safely. 3M Kits come in a variety of response capacities in Oil & Petroleum, Chemical & Universal and General Purpose versions. Ensure your site is protected from environmental & safety impacts that over time, can become very costly.

3M Emergency Spill Response Kits Contain:

1 3M™ Sorbents

2 3M™ Respirators

3 Easy to follow spill response instructions

4 Lightweight personal protective equipment

5 Identifiable storage bins

6 Contaminated waste bags

32

3M™ Sorbent Configurations3M™ Sorbent Booms3M Sorbent Booms are used to stop the spread of a spill and are the first line in spill containment. Once you have booms in place you can then use pads, rolls or pillows to recover the spilt liquids. Booms will also recover large amounts of liquids. Booms are available in Oil & Petroleum, Chemical & Universal and General Purpose versions.

3M™ Sorbent Pads3M Sorbent Pads are used to clean up and recover spilt liquids. Pads are used like a wipe and are very versatile for getting at hard to reach areas. Pads may also be left on a spill area to soak up spilt liquids. Pads are available in Oil & Petroleum, Chemical & Universal and General Purpose versions.

3M™ Sorbent Rolls3M Sorbent Rolls are used to clean up and recover spilt liquids. Rolls give you the ability to use the exact amount of sorbent required. You can leave required amounts of sorbent on the spill, to soak up larger areas. They can also be used as matting in dirty areas or where contamination is an issue. Rolls are available in both Oil & Petroleum and Chemical & Universal versions.

3M™ Sorbent Pillows3M Sorbent Pillows are used to clean up and recover spilt liquids in hard to reach areas such as bilge pumps, drains, sumps and holding tanks. Pillows are available in both Oil & Petroleum and Chemical & Universal versions.

3M™ Folded SorbentsThe unique 3M Folded Sorbents are 4 products in one. Able to be used as a boom, sheet, pad, or pillow, this allows one product to be stocked for almost any liquid spill. Perforations every 40cm permit the required length of sorbent to be selected so there is no waste. The handy dispenser allows easy on site or off site use and can be wall mounted. No need to handle messy clay products that can be dusty, 3M Folded Sorbents are clean, lightweight and offer superior value.

3M™ Emergency Spill Response KitsBe prepared for a Spill Emergency3M Emergency Spill Response Kits are the best way to protect against unexpected spills that can happen anywhere at anytime. 3M Kits give you the ability to have the response materials close to any potential hazard area. This enhances your ability to contain spills quickly and safely. 3M Kits come in a variety of response capacities in Oil & Petroleum, Chemical & Universal and General Purpose versions. Ensure your site is protected from environmental & safety impacts that over time, can become very costly.

3M Emergency Spill Response Kits Contain:

1 3M™ Sorbents

2 3M™ Respirators

3 Easy to follow spill response instructions

4 Lightweight personal protective equipment

5 Identifiable storage bins

6 Contaminated waste bags

32

Manage spills, drips and leaks Emergency spill response Protect, clean & maintain equipment Help keep the site free from slip hazards Reduce site remediation costs Contamination & pollution prevention

Why use 3M™ Sorbents?

Selecting the Correct 3M™ SorbentSELECTION GUIDE GENERAL

PURPOSE SORBENT

For use on land

OIL SORBENT For use on

land and water

CHEMICAL SORBENT

For use on land 3M SPECIALIST SELECTION

Does the liquid mix with water?

NO

YES - Is it corrosive? NO

YES

HYDROCARBON OILS

Fuels, Petrol, Diesel Motor Oils 2nd Selection 3rd Selection

WATER SOLUBLE OILS

Hydraulic Fluids Cutting Fluids 2nd Selection

MINERAL OILS

2nd Selection 3rd Selection

HYDROCARBON SOLvENTS

Mineral Spirits Xylene Toluene Turpentine Degreaser

3rd Selection 2nd Selection

COOLANTS

Ethers Glycols Esters

2nd selection

PAINTS

2nd selection

ALCOHOLS

Ethanol, Methylated Spirits 2nd selection

CHLORINATED SOLvENTS

Methylene Chloride Carbon Tetrachloride Chloroform

2nd selection

DILUTE ACIDS

Hydrochloric Acid Hydrofluoric Acid Sulphuric Acid

DILUTE ALkALIS

Sodium Hydroxide 2nd Selection

AGRICULTURAL CHEMICALS

Pesticides Weedicides Herbicides

2nd Selection

CONCENTRATED ACIDS / ALkALIS

CALL 3M ON 1800 024 464

3M™ Oil & Petroleum SorbentsReusable & Repels Water3M oil and petroleum sorbents are designed specifically to control, clean and recover oil and other petroleum based fluids. They repel and float on water while absorbing hydrocarbon based fluids.

These sorbents are available in many configurations including, booms, sheets, pads, pillows and rolls. The 3M sorbent range can be reused, with 90% of the absorbed oil able to be rung out and reclaimed.

3M™ Oil & Petroleum Sorbent Pad HP156Easy to apply and retrieve, these pads are highly absorbent and can be used on land and water in numerous clean up and maintenance applications.

Product Code 3M Order Code Dimensions Capacity PackagingHP156 70070317329 43cm x 48cm x 0.5cm 1.4L / pad 100 pads / bale

3M™ Oil & Petroleum Double Sorbent Pad HP256These pads are double the thickness of the HP156 pads and have double the absorption capacity. They can be used on land and water in numerous clean up and maintenance applications.

Product Code 3M Order Code Dimensions Capacity PackagingHP256 0321340 43cm x 48cm x 1cm 2.5L / pad 100 pads / bale

3M™ Oil & Petroleum Large Sorbent Sheet T157These sheets have a much larger sorbent capacity than conventional pads, and are simple to apply and retrieve. The sheets are ideal for clean up on large hydraulic machinery and also in clean up applications on waterways.

Product Code 3M Order Code Dimensions Capacity PackagingT157 98071107563 96cm x 86cm 6L / sheet 50 sheets / bale

54

MicrobundleTechnology


3M™ Oil & Petroleum Sorbent Pad HP156Easy to apply and retrieve, these pads are highly absorbent and can be used on land and water in numerous clean up and maintenance applications.

Product Code 3M Order Code Dimensions Capacity PackagingHP156 70070317329 43cm x 48cm x 0.5cm 1.4L / pad 100 pads / bale

3M™ Oil & Petroleum Double Sorbent Pad HP256These pads are double the thickness of the HP156 pads and have double the absorption capacity. They can be used on land and water in numerous clean up and maintenance applications.

Product Code 3M Order Code Dimensions Capacity PackagingHP256 0321340 43cm x 48cm x 1cm 2.5L / pad 100 pads / bale

3M™ Oil & Petroleum Large Sorbent Sheet T157These sheets have a much larger sorbent capacity than conventional pads, and are simple to apply and retrieve. The sheets are ideal for clean up on large hydraulic machinery and also in clean up applications on waterways.

Product Code 3M Order Code Dimensions Capacity PackagingT157 98071107563 96cm x 86cm 6L / sheet 50 sheets / bale

54

3M™ Oil & Petroleum Sorbent Roll HP100HP100 rolls have excellent absorption capacity and are ideal for fast coverage of large areas during oil or petroleum spills or during maintenance work.

Product Code 3M Order Code Dimensions Capacity PackagingHP100 70070313781 44m x 97cm 277L / roll 1 roll / case

3M™ Oil & Petroleum Mini-boom T4This boom can be used to contain and encircle small spills. The T4 is easy to deploy and can be used in many applications.

Product Code 3M Order Code Dimensions Capacity PackagingT4 0349308 1.2m x 7.5cm 3.8L / boom 12 booms / case

TechAssist Phone the 3M TechAssist Hotline on 1800 024 464 for an immediate link into the worldwide resources of 3M and answers to any questions relating to your spill response needs.


76

3M™ Oil & Petroleum Large Sorbent Boom T270These booms can be linked together by in built connectors to overlap and contain spills and discharges in large areas such as streams, rivers, lakes, and docks. Designed for long term deployment, the T270 booms have a large absorption capacity and are UV resistant.

Product Code 3M Order Code Dimensions Capacity PackagingT270 98071106334 3m x 20cm 76L / boom 4 booms / bale

3M™ Oil & Petroleum Sorbent Double Boom T280This UV resistant double boom is ideal for spills on land and water. The flat design minimises escape of oil in flowing water while the unique double cylinder construction maximises absorption. The booms can be linked together by in built connectors to overlap and contain spills.

Product Code 3M Order Code Dimensions Capacity PackagingT280 0391250 3m x 23cm x 10cm 38L / boom 4 booms / bale

3M™ Oil & Petroleum Large Sorbent Pillow T240These open mesh bags are excellent for deployment in spaces such as sumps, boat bilges and catchment areas. Being UV resistant, the T240 pillows are designed for long term use.

Product Code 3M Order Code Dimensions Capacity PackagingT240 0246165 63cm x 36cm 13L / pillow 10 pillows / bale

3M™ Oil & Petroleum Folded Sorbent P-FL550DDOil and Petroleum version of the unique folded sorbent. Able to be used as a boom, sheet, pad, or pillow, allows one product to be stocked for almost any fluid spill. Perforations every 40cm allow the required length to be used, so there is no waste. 3M folded sorbents are clean, lightweight and offer superior value.

Product Code 3M Order Code Dimensions Capacity PackagingP-FL550DD 70070408979 45cm x 15m 40L / box 3 boxes / case


76

3M™ Oil & Petroleum Large Sorbent Boom T270These booms can be linked together by in built connectors to overlap and contain spills and discharges in large areas such as streams, rivers, lakes, and docks. Designed for long term deployment, the T270 booms have a large absorption capacity and are UV resistant.

Product Code 3M Order Code Dimensions Capacity PackagingT270 98071106334 3m x 20cm 76L / boom 4 booms / bale

3M™ Oil & Petroleum Sorbent Double Boom T280This UV resistant double boom is ideal for spills on land and water. The flat design minimises escape of oil in flowing water while the unique double cylinder construction maximises absorption. The booms can be linked together by in built connectors to overlap and contain spills.

Product Code 3M Order Code Dimensions Capacity PackagingT280 0391250 3m x 23cm x 10cm 38L / boom 4 booms / bale

3M™ Oil & Petroleum Large Sorbent Pillow T240These open mesh bags are excellent for deployment in spaces such as sumps, boat bilges and catchment areas. Being UV resistant, the T240 pillows are designed for long term use.

Product Code 3M Order Code Dimensions Capacity PackagingT240 0246165 63cm x 36cm 13L / pillow 10 pillows / bale

3M™ Oil & Petroleum Folded Sorbent P-FL550DDOil and Petroleum version of the unique folded sorbent. Able to be used as a boom, sheet, pad, or pillow, allows one product to be stocked for almost any fluid spill. Perforations every 40cm allow the required length to be used, so there is no waste. 3M folded sorbents are clean, lightweight and offer superior value.

Product Code 3M Order Code Dimensions Capacity PackagingP-FL550DD 70070408979 45cm x 15m 40L / box 3 boxes / case

3M™ Oil & Petroleum Spill Response Kits 3M™ Oil & Petroleum Spill Response Kit SRCB-Petro 25 Litre CapacityThis compact lightweight spill kit is designed to contain a small oil or fuel spill and can be easily stored in the cabin of transport vehicles for quick deployment. Contents Description 10 Oil & Petroleum Sorbent Pads HP156 4 Oil & Petroleum Sorbent Mini Booms T4 1 3M™ Disposable Half Face Respirator 4251 (A1P2) 1 Pair of Solvent and Oil Resistant Gloves 1 Safety Specs 1 Contaminated Waste Bag (Yellow) 1 Cabin Bag 1 Spill Response Procedures

Product Code 3M Order Code Capacity Packaging

SRCB-Petro 0398818 25L / kit 1 kit / case

3M™ Oil & Petroleum Spill Response Kit OSRK-45 45 Litre CapacityThese kits are easily stored and are excellent for use where the potential for smaller petroleum and oil spills occur. Contents Description 17 Oil & Petroleum Sorbent Pads HP156 6 Oil & Petroleum Sorbent Mini Booms T4 1 3M™ Disposable Half Face Respirator 4251 (A1P2) 1 Pair of Solvent and Oil Resistant Gloves 1 Safety Specs 1 Contaminated Waste Bag (Yellow) 1 60 Litre Drum 1 Spill Response Procedures


OSRK-45 0398792 45L / kit 1 kit / case

3M™ Oil & Petroleum Spill Response Kit OSRK-190 190 Litre CapacityIdeal for areas where large spills have a potential to occur such as fuel storage areas, loading docks, manufacturing sites and other areas where fuels and petroleum liquids are present. Contents Description 25 Oil & Petroleum Sorbent Pads HP156 2 Oil & Petroleum Double Booms T280 2 Oil & Petroleum Folded Sorbent Rolls P-FL550DD 2 3M™ Disposable Half Face Respirator 4251 (A1P2) 2 Pair of Solvent and Oil Resistant Gloves 2 Safety Specs 2 XL Disposable Coveralls 5 Contaminated Waste Bag (Yellow) 1 240L Wheely Bin 1 Spill Response Procedures


OSRK-190 0398776 190L / kit 1 kit / case

98

3M™ Chemical SorbentsThe comprehensive site safety solution3M chemical sorbents are relatively inert and powerful enough to handle dilute acids, bases, coolants, solvents, oils and many other hazardous liquids - eliminating the need to stock several different sorbent types.

3M™ High Performance Chemical Pad C-PD914DDPackaged in a convenient dispenser box, these pads are ideal for small spills and wiping down contaminated tools and equipment. Pads have a scrim liner for added strength.

Product Code 3M Order Code Dimensions Capacity PackagingC-PD914DD 70070408235 23cm x 36cm 590ml / pad 25 pads / box

3M™ High Performance Chemical Roll C-RL15150DDRolls have a scrim liner for added strength. Designed to cover large areas - the chemical roll is a very cost effective method of spill control, allowing users to tear off desired amount.

Product Code 3M Order Code Dimensions Capacity PackagingC-RL15150DD 70070408243 45m x 38cm 117L / roll 1 roll / case

3M™ Chemical Miniboom P200Light weight and easy deploy, the booms can be used to contain and encircle small spills.

Product Code 3M Order Code Dimensions Capacity PackagingP-200 0292805 1.2m x 7.5cm 3.8L / boom 12 booms / case

3M™ Chemical Pillow P300The P300 pillows can be placed at the source of a spill or used to clean up a contained spill.

Product Code 3M Order Code Dimensions Capacity PackagingP-300 0292797 23cm x 38cm 2L / pillow 16 pillows / case

3M™ Chemical Folded Sorbent C-FL550DDChemical & Universal version of the unique folded sorbent. Able to be used as a boom, sheet, pad, or pillow, allows one product to be stocked for almost any fluid spill. Perforations every 40cm allow the required length to be used, so there is no waste. 3M folded sorbents are clean, lightweight and offer superior value.

Product Code 3M Order Code Dimensions Capacity PackagingC-FL550DD 70070517167 45cm x 15m 40L / box 3 boxes / case




98

3M™ Chemical Spill Response Kits3M™ Chemical Response Kit SRP-Chem 17 Litre CapacitySmall lightweight and easy to store, the Spill Response Pack is ideal for immediate on site response. This product is suitable for use in laboratories, universities, hospitals, shipping docks or any areas where chemicals are stored or transferred. Contents Description 10 Chemical Pads C-PD914DD 3 Chemical Mini Booms P200 1 Contaminated Waste Bag (Yellow)

Product Code 3M Order Code Capacity PackagingSRP-Chem AT010561077 17L / kit 2 kits / case

3M™ Chemical Response Kit SRCB-Chem 25 Litre CapacityThis compact, lightweight spill kit is designed to contain a small fuel or chemical spill and can be easily stored in the cabin of transport vehicles for quick deployment. Contents Description 20 Chemical Pads C-PD914DD 3 Chemical Mini Booms P200 2 Chemical Pillows P300 1 3M™ Disposable Half Face Respirator 4277 (A1B1E1P2) 1 Pair of Solvent and Oil Resistant Gloves 1 Safety Specs 1 Contaminated Waste Bag (Yellow) 1 Cabin Bag 1 Spill Response Procedures

Product Code 3M Order Code Capacity PackagingSRCB-Chem 0398826 25L / kit 1 kit / case

3M™ Chemical Response Kit CSRK-35 35 Litre CapacityThis small easy to store Chemical Spill Kit is ideal for areas where smaller amounts of chemicals are shipped, stored or transferred. Contents Description 20 Chemical Pads C-PD914DD 6 Chemical Mini Booms P200 2 Chemical Pillows P300 1 3M™ Disposable Half Face Respirator 4277 (A1B1E1P2) 1 Pair of Solvent and Oil Resistant Gloves 1 Safety Specs 1 Contaminated Waste Bag (Yellow) 1 60 Litre Drum 1 Spill Response Procedures

Product Code 3M Order Code Capacity PackagingCSRK-35 0398800 35L /kit 1 kit /case

3M™ Chemical Response Kit CSRK-180 180 Litre CapacityThe 180 Litre Kit is ideal for any areas where chemicals are shipped, stored or transferred. Contents Description 12 Chemical Mini Booms P200 8 Chemical Pillows P300 3 Chemical Folded Sorbent Rolls 3M C-FL550DD 2 3M™ Disposable Half Face Respirator 4277 (A1B1E1P2) 2 Pair of Solvent and Oil Resistant Gloves 2 Safety Specs 2 XL Disposable Coveralls 5 Contaminated Waste Bag (Yellow) 1 240L Wheely Bin 1 Spill Response Procedures

Product Code 3M Order Code Capacity PackagingCSRK-180 0398784 180L / kit 1 kit / case

3M™ High Performance Chemical Pad C-PD914DDPackaged in a convenient dispenser box, these pads are ideal for small spills and wiping down contaminated tools and equipment. Pads have a scrim liner for added strength.

Product Code 3M Order Code Dimensions Capacity PackagingC-PD914DD 70070408235 23cm x 36cm 590ml / pad 25 pads / box

3M™ High Performance Chemical Roll C-RL15150DDRolls have a scrim liner for added strength. Designed to cover large areas - the chemical roll is a very cost effective method of spill control, allowing users to tear off desired amount.

Product Code 3M Order Code Dimensions Capacity PackagingC-RL15150DD 70070408243 45m x 38cm 117L / roll 1 roll / case

3M™ Chemical Miniboom P200Light weight and easy deploy, the booms can be used to contain and encircle small spills.

Product Code 3M Order Code Dimensions Capacity PackagingP-200 0292805 1.2m x 7.5cm 3.8L / boom 12 booms / case

3M™ Chemical Pillow P300The P300 pillows can be placed at the source of a spill or used to clean up a contained spill.

Product Code 3M Order Code Dimensions Capacity PackagingP-300 0292797 23cm x 38cm 2L / pillow 16 pillows / case

3M™ Chemical Folded Sorbent C-FL550DDChemical & Universal version of the unique folded sorbent. Able to be used as a boom, sheet, pad, or pillow, allows one product to be stocked for almost any fluid spill. Perforations every 40cm allow the required length to be used, so there is no waste. 3M folded sorbents are clean, lightweight and offer superior value.

Product Code 3M Order Code Dimensions Capacity PackagingC-FL550DD 70070517167 45cm x 15m 40L / box 3 boxes / case

10

3M™ General Purpose Sorbent Pad3M General Purpose Sorbent pads are used to clean up and recover spilt liquids found commonly in industry. Ideal for placing in, under and around machines to catch drips. It is highly absorbent and non-granular so it will not damage plant equipment. General purpose pads can also be used like a wipe and are very versatile for getting at hard to reach areas. Pads may also be left on a spill area to soak up spilt liquids.

Product Code 3M Order Code Dimensions Capacity PackagingM-PD1520DD 70070405884 40cm x 52cm 1.4L / pad 100 pad / case

3M™ General Purpose Sorbent BoomBecause of their tube-like shape, general purpose booms are typically used to encircle spills and to contain leaks. Also, ideal for placing in, under and around machines to stop those annoying leaks.

Product Code 3M Order Code Dimensions Capacity PackagingM-MB308 70070313567 2.4m x 7.5cm 7.5L / boom 6 booms / case

3M™ General Purpose Folded SorbentGeneral purpose version of the unique folded sorbent. Able to be used as a boom, sheet, pad, or pillow, allows one product to be stocked for almost any fluid spill. Perforations every 40cm allow the required length to be used, so there is no waste. 3M folded sorbents are clean, lightweight and offer superior value.Product Code 3M Order Code Dimensions Capacity PackagingM-FL550DD 70070407914 45cm x 15m 40L / box 3 boxes / case

3M™ General Purpose Spill Kit Spill kits are the best way to protect against unexpected spills that can happen anywhere at anytime. The 3M general purpose spill kit is designed for control of accidental and routine leaks, drips and spills of oils, lubricants and other non aggressive liquids found commonly in industry. By having a general purpose spill kit on site, it gives you the ability to have response materials close to any potential hazard area. This enhances your ability to contain spills quickly and safely.

Contents Description 25 General Purpose Sorbent Pad 2 General Purpose Sorbent Boom 1 General Purpose Folded Sorbent 1 Pair of Solvent and Oil Resistant Gloves 1 Contaminated Waste Bag (Yellow) 1 120L Wheely Bin 1 Spill Response Procedures


MSRK-90 AT010565805 90L / kit 1 kit / case


3M™ General Purpose SorbentsThe maintenance sorbent.3M general purpose (maintenance) sorbent absorbs almost any type of non-aggressive liquid. Ideal for the control of accidental and routine leaks, drips and spills of oils, lubricants and any other non-aggressive liquid found commonly in industry. The unique 3M general purpose sorbents high fluid capacity means the need to change the sorbent is less frequent, saving on material, labour, and disposal costs. 3M general purpose sorbents are designed to help maintain a clean and safe working environment.


NEW

NEW

NEW

3M Advanced Sorbent Technology3M pioneered the concept of blowing polypropylene for the manufacture of disposable respirators over 25 years ago. Using this expertise and a tradition of innovation, the synthetic 3M™ Sorbent was developed.

11

3M™ General Purpose Sorbent Pad3M General Purpose Sorbent pads are used to clean up and recover spilt liquids found commonly in industry. Ideal for placing in, under and around machines to catch drips. It is highly absorbent and non-granular so it will not damage plant equipment. General purpose pads can also be used like a wipe and are very versatile for getting at hard to reach areas. Pads may also be left on a spill area to soak up spilt liquids.

Product Code 3M Order Code Dimensions Capacity PackagingM-PD1520DD 70070405884 40cm x 52cm 1.4L / pad 100 pad / case

3M™ General Purpose Sorbent BoomBecause of their tube-like shape, general purpose booms are typically used to encircle spills and to contain leaks. Also, ideal for placing in, under and around machines to stop those annoying leaks.

Product Code 3M Order Code Dimensions Capacity PackagingM-MB308 70070313567 2.4m x 7.5cm 7.5L / boom 6 booms / case

3M™ General Purpose Folded SorbentGeneral purpose version of the unique folded sorbent. Able to be used as a boom, sheet, pad, or pillow, allows one product to be stocked for almost any fluid spill. Perforations every 40cm allow the required length to be used, so there is no waste. 3M folded sorbents are clean, lightweight and offer superior value.Product Code 3M Order Code Dimensions Capacity PackagingM-FL550DD 70070407914 45cm x 15m 40L / box 3 boxes / case

3M™ General Purpose Spill Kit Spill kits are the best way to protect against unexpected spills that can happen anywhere at anytime. The 3M general purpose spill kit is designed for control of accidental and routine leaks, drips and spills of oils, lubricants and other non aggressive liquids found commonly in industry. By having a general purpose spill kit on site, it gives you the ability to have response materials close to any potential hazard area. This enhances your ability to contain spills quickly and safely.

Contents Description 25 General Purpose Sorbent Pad 2 General Purpose Sorbent Boom 1 General Purpose Folded Sorbent 1 Pair of Solvent and Oil Resistant Gloves 1 Contaminated Waste Bag (Yellow) 1 120L Wheely Bin 1 Spill Response Procedures


MSRK-90 AT010565805 90L / kit 1 kit / case

Important Information3M Sorbents are relatively inert and do not alter the chemical properties of absorbed liquid. Used Sorbents should be handled, labelled, and transported in accordance with safety and environmental regulations for the absorbed liquid. When handling chemicals you must be aware of potential health and safety hazards which exist. The correct respiratory protection and personal protective equipment must be used to protect against the hazard. Always refer to the product Material Safety Data Sheet for the spilt substance.


3M’s patented Microbundle Technology employs millions of tiny voids to absorb liquid – creating the most high performance sorbent material

3M Sorbents come in a variety of shapes & sizes allowing you to use the exact product required for your application

The 3M™ Oil Sorbent range can be reused, with 90% of the absorbed oil able to be rung out and reclaimed!

3M Sorbents are lightweight, non abrasive, dust free and are quick and easy to deploy

3M Sorbents are high capacity which means you don’t need to use as much as other sorbent products. This creates less waste and is quicker to clean up

3M Sorbents are made from inert polypropylene and polyester fibers trapping liquid inside

Spill ResponseOur Value Offering

More than just great products3M's Respiratory Protection, Hearing Protection, and Spill Control products are supported by a variety of industry leading services to make sure the right products are selected and used to their greatest advantage.

Specialist Field Force3M has Occupational Hygienists and Technical Specialists who understand the product range and it's application. 3M can arrange for site surveys, product training, fit charts, and even arrange for fit testing.

TechAssistTechAssist is the ideal point of contact for your respiratory, hearing and spill control questions. Supported by trained staff, TechAssist is an immediate link into the worldwide resources of 3M.

Industry SupportFor many years 3M has been privileged to support various industry bodies including the Australian Institute of Occupational Hygienists, as well as being an active member of Standards Australia working committees on Respiratory and Hearing Protection.

Wide Distributor Network3M distributes it's Respiratory Protection, Hearing Protection, and Spill Control range through a highly trained distribution network which covers all major areas of Australia. Please contact 3M to find your nearest 3M Authorised Distributor.

ACN 000 100 096 ABN 90 000 100 0963M Australia Pty LimitedOccupational Health & Environmental Safety Division950 Pacific Highway, Pymble, NSW, 2073 S05 03/07

Please contact 3M through the following:

3M Australia Pty Ltd Phone 136 136

3M Australia Pty Ltd Customer Service Phone 1300 363 565 Fax 1800 656 222

3M TechAssist Hotline Phone 1800 024 464

World Wide Web www.3m.com/au/ohs

How to contact us

© Copyright 3M Australia Pty. Limited 2007 Neither whole or part of this publication may be reproduced without prior permission.

Helping to protect your way of life. Helping to protect your way of life.

ISO 9001 Lic 0014SAI Global

spill response3m™ emergency spill response kits be prepared for a spill emergency 3m emergency...

Documents