spill containment - lawson products, inc. spill containment (cont.) types of containment units...

Download Spill Containment - Lawson Products, Inc. Spill Containment (cont.) Types of Containment Units (cont.)

If you can't read please download the document

Post on 25-Aug-2020

0 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • PRODUCT INFO REPORT

    1.866.LAWSON4U 1.866.529.7664 www.lawsonproducts.com Contact engineering at engineering@lawsonproducts.com © Lawson Products, Inc.

    Page 1 of 2PIRSF019 REV. 3/12

    Automotive Chemicals Cutting Tools/ Abrasives

    Electrical Fasteners Fluid Power Safety/ Material Handling

    Shop Supplies/ Hand Tools

    Welding

    Spill Containment

    Why is spill containment important? Chemical and oil spills pose a significant threat to workers, the workplace and the environment. Accidental spills happen and when they do you need products that help you to reduce your exposure.

    The Environmental Protection Agency (EPA) has requirements for the containment of hazardous materials:

    • EPA 40 CFR 264.175 Container storage areas must have containment systems that have sufficient capacity to contain 10% of the volume of the containers or the volume of the largest container whichever is greater.

    • EPA 40 CFR 265.173 A container holding hazardous materials must always be closed during storage, except when necessary to add or remove waste. A container holding hazardous materials must not be opened, handled or stored in a manner which may rupture the container or cause it to leak.

    • SPCC Compliance: The Spill Prevention, Control, and Countermeasure (SPCC) rule includes requirements for oil spill prevention, preparedness, and response to prevent oil discharges to navigable waters and adjoining shorelines.

    Types of Containment Units

    Modular Spill Platforms

    • Easy to connect built in U channel allows for multiple configurations of the modular spill platforms

    • Polyethylene construction for chemical resistance

    • Forklift pockets for easy transportation

    • Flat top grating

    • Removable grating for easy cleaning

    • EPA 40 CFR 264.175 and SPCC compliant

    Modular spill platforms

  • PRODUCT INFO REPORT

    1.866.LAWSON4U 1.866.529.7664 www.lawsonproducts.com Contact engineering at engineering@lawsonproducts.com © Lawson Products, Inc.

    Page 2 of 2PIRSF019 REV. 3/12

    Automotive Chemicals Cutting Tools/ Abrasives

    Electrical Fasteners Fluid Power Safety/ Material Handling

    Shop Supplies/ Hand Tools

    Welding

    Spill Containment (cont.)

    Types of Containment Units (cont.)

    Two and Four-Drum Basins

    • Drums rest on the floor of the basin with 6.5” sidewalls

    • Polyethylene construction for chemical resistance

    Intermediate Bulk Containment Units

    • 100% Polyethylene containment tub for chemical resistance

    • Choice of steel or polyethylene platforms

    • SF15583 Double All-Poly Platform includes two bucket wells for easy dispensing

    • EPA 40 CFR 264.175 and SPCC compliant

    Outdoor Drum Storage (Rotary Top & Storage Building)

    • Units protect up to four 55-gallon drums

    • Units are made from High Density Polyethylene for chemical resistance

    • Units are EPA 40 CFR 264.175 and SPCC compliant

    • Units are equipped with 4-way forklift pockets

    • Rotary top has added height for storage with drum pumps in place

    • Storage Buildings have vented door louvers

    • Storage Building has top hooks for moving (building must be empty)

    • Units accept a 48” x 48” pallet

    • Units have removable grates

    Workstations

    • Available in low and high profile ( high profile for storage with drum pump in place)

    • Both units are EPA 40 CFR 264.175 and SPCC compliant

    • Forklift pockets Includes locks for secure storage

    High-profile 2-drum workstation

    4-drum rotary-top containment unit

    Intermediate bulk containment unit

    2-drum storage basin

Recommended

View more >