Spicer® Model TE14 Series Powershift Transmission Platform140 to 190 kW (200 to 255 hp)

Providing a flexible, broad range of transmission solutions that meet specific regional requirements and customer preferences for the material-handling, construction, mining, and forestry markets.

General Rating

Input RPM Maximum 2,800

Turbine Stall Nm (ft-lb) 1,500 (1,100)

Total Assembled Weight with SAE 3 Bell Housing Kg (lb) Short Drop: 360 (794)

ConverterATING

Housing Universal mounting flange for OEMs; SAE 3 adaptor flywheel

Wheel Size (T.R.) mm (in) 300 (12) (freewheel standard) or 330 (13) high efficiency; numerous ratios available

Mounting HR – integral engine mount, MHR – mid-mountOptions Freewheel and/or lock-up

Spicer® Model TE14 Series Powershift Transmission Platform140 to 190 kW (200 to 255 hp)

Sales Office – ItalyZona IndustrialeArco, Italy 38062

www.dana.com/offhighway

©2014 Dana Limited OHSTE14-052014

Compatible with engines up to 190 kW (including Tier 4), the Spicer® Model TE14 Series powershift transmission platform bridges the gap between current hydrodynamic transmissions and future technologies. This model provides a range of technology options to accommodate specific customer and regional requirements for cost, productivity, fuel economy, and productivity benefits.

Application PolicyCapacity ratings, features, and specifications vary depending upon the model and type of service. Application approvals must be obtained from Dana; contact your representative for application approval. We reserve the right to change or modify our product specifications, configurations, or dimensions at any time without notice.

PremiumHybrid-EnabledPremiumValueFeatures: Primary

Optional lock-up

Parallel hydraulic hybrid

Direct drive efficiency

Narrower ratio steps

Cast-aluminum torque converter

Next-generation electronic controls

No torsional dampener required with converter mounted pump drive

Durable roller type freewheel

Low parasitic losses and optimized lubrication

Improved transmission efficiency

Stamped-steel torque converter

On/off solenoid controls

Intelligent lubrication and cooling

Pump drive ratio: 1:1

Pump drive ratio: 0.83:1

3 speed

4 speed

Auxiliary Pump Drive

Offset from Engine Centerline Standard: variable displacement

Centre Distance Standard: variable displacement

Torque Capacity (Nm) 425

Pump Mounting Standard or variable displacement

Flanges

Spicer® Wing Series™

Output: 6C, 7C, 8.5C (14T spline)Input: 5C, 6C, 7C (14T spline)

Spicer® Output: DIN150, 1480/1550, 1600, 1700 (15T spline)Input: DIN150, 1480/1550, 150KV70 (15T spline)

Dimensions – Oil Capacity

Length Bell Housing Mounting Face to Rear Flange Face – With Lock-up/Without Lock-up – mm (in) 878.8/832.5 (34.60/32.78)

Width Maximum See drawing

Output Drop Vertical – Short Drop/Long Drop – mm (in) 245/470 (9.64/18.50)

Output Offset Horizontal 0

Oil Filter Remote filter for easy access

Dipstick Provision Yes

Oil Capacity L (gal)/Type 35 (9.2) /ATF Dexron III approved

Ratios* (Standard) *Typical ratios; options available.

FWD 1 FWD 2 FWD 3 FWD 4 REV 1 REV 2 REV 3 REV 43x3 6.048 2.859 0.713 – 6.048 2.859 0.713 –4x4 5.938 2.859 1.649 0.955 5.938 2.859 1.649 0.955

66.5285

314 342

1018.5

868