spica fpi envelopes – current status
DESCRIPTION
SPICA FPI envelopes – current status. 16 th April, 2010 Hideo Matsuhara On behalf of FPI team. About the 3D file delivered on 16 th Apr. 2010. FPI_ASM_IOB( Trass )_Envelope(FPC)_ New.zip Yellow: IOB - PowerPoint PPT PresentationTRANSCRIPT
SPICA FPI envelopes – current status
16th April, 2010Hideo Matsuhara On behalf of FPI team
About the 3D file delivered on 16th Apr. 2010
FPI_ASM_IOB(Trass)_Envelope(FPC)_New.zip Yellow: IOB
proposed structure satisfying the FPIA stiffness requirement with top/bottom/side plates made of Aluminum
Interferes SAFARI envelope (!) Too heavy!
White/gray : MIRACLE – now the optics are updated. The CAD model now also includes Filter & Slit wheels, etc.(mostly final)
Green, purple: FPC-G, FPC-S Light blue : SCI SAFARI is omitted, just for better seeing for other FPIs
FPI envelopes & IOB mount plate & MIRACLE alignment panel (1)
MIRMES sits here??
MIRHES sits here??
FPI envelopes & IOB mount plate & MIRACLE alignment panel (2)
SAFARI sits here
Inside the MIRACLE envelopes -
FPC optics can be delivered soon Orientation of SCI is not the current version
Optics inside the envelopes (1)
Paraxial focal plane of STAMIRACLE-L
MIRACLE-S
SCIFPC-G
FPC-S
MIRACLE-long envelope
FPC-S envelope and optics inside
The optics will be updated soon, but must be inside the current envelope
1 2 3 4 5 6 7 8
A
B
C
D
E
承認 審査 設計
尺度 日付
略称
図面番号
材質
仕上記号 面取
t=
製品記号担当 訂 正 記 事符号・日付 普通寸法 ±許容差( )
寸法区分等級 精級 中級 粗級 (2粗級 )
以下をこえ5 0 0 1 6 0 01 8 0 5 0 0 5 0 1 8 6
1 8 0 5 0 1 8 6
以下
以下
以下
以下
以下
をこえ
をこえ
をこえ
をこえ
角 度
株式会社ジェネシア
0 .0 50 .0 80 .10 .20 .30 .6
0 .0 80 .10 .1 50 .30 .51
0 .20 .30 .40 .81 .22 .5
0 .30 .40 .61 .224
( )
N E X T A S S 'Y ・個数
C
D
B
A
E
1 2 3 6 7
製図
表面処理
硬度H =
A 3用紙サイズ
熱処理
個数
GE1350- CAM- RP1- 001
FPC- S組図2010/ 4/ 21:2.5 1:5
注1) 機構部材の材料はすべてアルミ6061- T6とした注2) カセグレン望遠鏡の焦点からピックオフミラーまでの 距離は変更可能。ただし変更に伴いピックオフミラーの 寸 F法や PCの重心位置も変更される。※ 1 IOBへの設置インタフェースを含まない包絡域
A
A A- A断面
119.22 600O
230
142
カセグレ ン望遠鏡 光軸
カセグレ ン望遠鏡 近軸焦点
R- axis
Y- axis
273.7
474.7
1固定点候補
54 74.5
2固定点候補
※ 1包絡域
1:5
重心
Near future updates, deliverables
SCI optics will be included in the CAD file, and its orientation will be corrected in the next round
FPC optics (under updates, new version will be available on 26th Apr.) will also be included in the CAD file
IOB mechanical design – to be discussed on 21st Apr. at JAXA Looking for a solution to satisfy the serious stiffness
requirements – need of a drastic idea? New SAFARI optics/envelopes will be included when
available.. Envelopes MIRMES, MIRHES will be deliverable in early
May (tbd) but no mechanical interference is expected with SAFARI