< specifications. > version:a1 (pic) br-fl-70w-01 …rd-light.com/shop/sites/default/files/led...
TRANSCRIPT
< Specifications. > Version:A1
(PIC)Model No.
Item Power Input Voltage Input Frequency Output Power Power Factor LuminousFlux Beam Angle Weight
BR-FL-70W-01 70W AC110-240V 50/60HZ 62W >0.9 5600Lm 120° 5.25 kg
BR-FL-100W-01 100W AC110-240V 50/60HZ 89W >0.9 8000 Lm 120° 5.5 kg
Light Source Spec
LED Type
Color Accuracy(CRI)
Color
Environment Spec.Operational TemperatureRangePreservation TemperatureRange
Operational Humidity Range
Installation Area
Lifespan
Dimension Diagram
BR-FL-70W-01 BR-FL-100W-01Photoelectric Spec
Epistar
CRI>70
WW(3000-3500K) NW (4000-4500K) CW(5000-6500K)
-20~50 ℃
-40~60 ℃
95% Rh or below(@-20°C~50°C)
Outdoor:IP65( Roadway, Pathway, Sidewalk,etc)
>35,000 hours
Certification standard
BR-FL-70W-01 BR-FL-100W-01
288.0
375.0
113.0
L1500mm
BR-FL-70W-01
L1500mm
101.0288.0
375.
0
BR-FL-100W-01
Optical Spec
BR-FL-70W-01
Radiation Lux Diagram
BR-FL-100W-01
Radiation Lux Diagram
Installation and use
Packing Spec
Gross weight Pcs/box Gross weight Pcs/carton
BR-FL-70W-01 6 kg 1 25.3 kg 4
BR-FL-100W-01 6.25kg 1 26.1 kg 4
1.Install the LED Floodlight onto the wall or ground,punch hole on the wall orground,prepare the expansion screw,and then fasten the floodlight 。First,adujust the angle you need,finally fasten the floodlights with screws
2.Connect the power wire from the Main lineto the power wire of thelamp,and then make treatment for water reistance. Pls note that theBrown color wire is Live wire,Blue wire is Null line,the yellow and greenwire is Earth line.
3.Turn on the power supply to ensuer the light is working,Installed.
Attention 1.Please turn off the power supply befor installation or changing assembly parts. 2.The input voltage and the lamp should be adapted. After connecting the power line, please make sure the wiring section is insulated. 3.Non-professionals, must not install or dismantle the lamps. 4.All the floodlights during installation and in use should not be put with glass cover vertically upside.
ItemBox Carton
Measurement(mm) Measurement(mm)
L400*W310*H160 L660*W430*H340
L400*W310*H160 L660*W430*H340
Through the 720H accelerated aging test,high and low temperature prediction in the rated under the working conditions after35000H,will provide an average 70% optic maintenance ratio(L70).
Remarks: 1.White light series: WW (3000-3500K) NW (4000-4500K) CW (5000-6500K) 2.Luminous flux tolerance for ±10% 3.Products shall be subject to any changes without prior notices.
Light attenuation map
0.920.930.940.950.960.970.980.99
11.01
0 90 180 270 360 450 540 630 720 (Hours)
Rel
ativ
e Lu
min
ous
Flux
110°