specifications lifting capacities - hsc- · pdf file1409 05h.ea213-1d hydraulic crawler crane...
TRANSCRIPT
1804 05H.EA274
HYDRAULIC CRAWLER CRANE
SCX700E
2
Variation of The Attachment
VARIATIONSCX700E
Line Speed *
Front / Rear Winch m/min
75
Boom Hoist Winch 62
Swing Speed min-1 (rpm) 3.0Travel Speed * km/h 1.3Gradeability % (Degree) 30 (17)Engine Model ISUZU 6HK1 (Stage II, Tier 2)
Engine Rated Output Power kW/min-1
(ps/rpm)140 / 2000
(190 / 2000)
Note : Speeds marked with "*" may vary depending on load applied.
Crane Specification (Boom Longest Length)
Boom Length m 12 to 54Ground Contact Pressure kPa (kgf/cm²) 79.4 (0.81)
(Boom longest length with 15 t hook)Overall Operating Weight t Approximately 68.2
(Boom longest length with 15 t hook)
3
Boom Length m 12 to 51
Ground Contact Pressure kPa (kgf/cm²)
80.3 (0.82)(Boom longest length + aux. sheave,
15 t + 6.5 t hook attached)
Overall Operating Weight t
Approximately 68.9(Boom longest length + aux. sheave,
15 t + 6.5 t hook attached)
Crane Specification (Boom Longest Length with Aux. Sheave)
VARIATION SCX700E
Boom Length m 27 to 45Crane Jib Length m 9 to 18Boom + Crane Jib Longest Length m 45 + 18
Ground Contact Pressure kPa (kgf/cm²)
81.3 (0.83)(Boom + crane jib longest length, 15 t +
6.5 t hook attached)
Overall Operating Weight t
Approximately 69.8(Boom + crane jib longest length, 15 t +
6.5 t hook attached)
Crane Specification (Boom Longest Length with Crane Jib)
4
Variation of The Attachment 2
Specifications 6
Crane Specifications 7
Dimensions and Specifications ................................................................................................................7
Boom and Crane Jib Configurations ........................................................................................................8
Combination of Boom and Crane Jib (Offset Angle 10° and 30°) ..........................................................9
Working Ranges .......................................................................................................................................10
Main Boom ........................................................................................................................................................ 10
Aux. Sheave .......................................................................................................................................................11
Crane Jib ........................................................................................................................................................... 12
Gross Rated Load Table ..........................................................................................................................15
Main Boom ........................................................................................................................................................ 15
Aux. Sheave ...................................................................................................................................................... 16
Main Boom with Aux. Sheave ............................................................................................................................ 17
Crane Jib ........................................................................................................................................................... 18
Main Boom with Crane Jib ................................................................................................................................ 22
Clamshell Specifications 25
Dimensions and Specifications ..............................................................................................................25
Working Ranges ................................................................................................................................................ 25
Specifications .................................................................................................................................................... 25
Clamshell Bucket ............................................................................................................................................... 25
Gross Rated Load Table .................................................................................................................................... 25
CONTENTSSCX700E
VARIATION
SPECIFICATIONS
5
Weights and Dimensions of Disassembled Units 26
Weights and Dimensions List .................................................................................................................26
Equipment List 29
Standard and Optional Equipment .........................................................................................................29
CONTENTS SCX700E
TECHNICAL DATA
6
Specifications
SPECIFICATIONSSCX700E
Specifications
Model ISUZU 6HK1Type 4-cycle, Water-cooled, Direct injection, Turbo-charged,
Diesel engineDisplacement 7.79 litersRated Output 140 kW / 2,000 min-1 (190 ps / 2,000 rpm)Fuel Tank Capacity 285 litersNotes Engine meets Tier 2 / Stage II of engine exhaust gas
emission regulations in USA, Europe, and Japan. Engine rated horsepower is based on international rating formula that includes engine alternator and without fan.
Engine
Control System
Main actuators are actuated by main hydraulic system controlled with pilot hydraulic system. Safety devices are securely operated by combined various electronic control with hydraulic system. Working speed can be precisely controlled according to control lever stroke depending on work.
Control LeversControl levers are designed and located based on ergonomics. Control lever system is cross operation lever type.
Display Panel Design 7 inches size. Located to check work state easily without disturbing the view of the operator.
Control
Hydraulic Oil Tank Capacity 250 liters
Hydraulic Pump Capacity
Max. 29.4 MPa
P1 230 liters / min for Front, Rear, boom hoist winch,travel and sideframe retract
P2 230 liters / min for Front, Rear and travelP3 131 liters / min for SwingP4 36 liters / min for Pilot control
Hydraulic System
Front and Rear WinchWinch Front RearRope Diameter 22 mm 22 mm
Rope LengthStandard 215 m 135 mWinding Capacity 320 m 320 m
Line Pull Rated 63 kN 63 kNBoom Hoist WinchRope Diameter 16 mmRope Length Incorporated 150 m
Hydraulic motor with multi-disc brakes.
Winch
Constructed with a hydraulic motor with reduction gear and multi-disc brakes and a swing bearing which has inner tooth.
Swing System
Upper Weight
Total Weight 23.0 ton8.6 ton Base Weight 1 piece8.4 ton Insert Weight 1 piece3.0 ton Top Weight 2 pieces
Counter Weight
Welded steel construction.
Carbody Frame
Frame Welded steel box construction and can be retracted for transportation.
Shoe 59 track shoes with triple grousers made of induction-hardened rolled alloy. 810mm width.
Upper Roller 2 pieces each side.Lower Roller 10 pieces each side.
Travel Device
1 peace each side.Hydraulic travel device (Hydrayulic motor and reducer)Travel speed(Gradability : 30%) 1.3 km/h
Crawler Sideframe
7
Dimensions and Specifications
51956170
5780
3380 3500
50401000
1750
12000 to 54000
16003340
810
4790 (3500)3980 (2690)
470
3280
1225
1145
R4065(Rear End Swing Radius)
3285
Crane SpecificationsMax. Lifting Load × Working Radius t × m 70 × 3.7Basic Boom Length m 12Max. Boom Length m 54Max. Crane Jib Length m 9 to 18Max. Boom + Jib Length m 45 + 18
Ground Contact Pressure kPa (kgf/cm²) 75.5 (0.77)(w / Basic Boom, 70 t Hook)
Overall Operating Weight t Approximately 64.8(w / Basic Boom, 70 t Hook)
Hook Weight70 t 800 kg40 t 410 kg15 t 360 kg6.5 t 180 kg
Front / Rear Winch Rope No. of Falls and Lifting Load
Hook Capacity ( t )Maximum Rated Load ( t )
10 Falls 9 Falls 8 Falls 7 Falls 6 Falls 5 Falls 4 Falls 3 Falls 2 Falls 1 Fall70 70 58.5 52 45.5 39 32.5 26 19.5 13 -40 - - - 40 39 32.5 26 19.5 13 -15 - - - - - - - 15 13 -6.5 - - - - - - - - - 6.5
NOTE : Data is expressed in SI units followed by conventional units in ( ).
Crane SpecificationsDimensions and Specifications
SPECIFICATIONS SCX700E
Crane Specifications
8
Boom (2/2)Boom Length
(m) Boom Configurations
36
3 9
3 9
6
6
6
65.42
66
3 9
3
3
3 9
9
95.42
66
6 9 9
6 9 95.42
66
393 9
3 9
6 9
6 95.42
66
3 9
3
3
3 9
6
6
6
65.42
66
9 9 9
9 9 95.42
66
42
3 3 9
3 3 9
6 9
6 95.42
66
3
3
9 9 9
9 9 95.42
66
9
9
96
6
6
6 95.42
66
45
3 9
3 9
96
6
6
6 95.42
66
3 9
3
3
3 9
9
9
9
95.42
66
6 9 9 9
6 9 9 95.42
66
48
3 9
3
3
3 9
6 9
6
6
6 95.42
66
3 9
3 9
6 9 9
6 9 95.42
66
51
3 3 9
3 3 9
6 9 9
6 9 95.42
66
9
9
9 96
6
6
6 9 95.42
66
543 9
3 9
9 96
6
6
6 9 95.42
66
Aux. Sheave Installable Boom LengthBoom Length (m) 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54With Aux. Sheave
( : Attachable : Not Attachable )
Dimensions Not Shown In The Figure
Symbols Boom Length (m)
3 36 69 9
Pendant Rope
Length (m) Rope Diameter (mm) Imprint
3 30 □・△・30・3・C5.42 30 □・△・30・5.42・C
6 30 □・△・30・6・C9 30 □・△・30・9・C
Boom and Crane Jib Configurations
Check the pendant rope with referring to the imprints on the rope end.
Boom (1/2)Boom Length
(m) Boom Configurations
125.42
6 6
153
35.42
66
18
3 3
3 3
6
6
5.42
5.42
6
6
6
6
21
3
3
6
9
6
9
5.42
5.42
6
6
6
6
24
3 3
3 3
6
65.42
66
66
6 65.42
66
3
3
9
95.42
66
27
3
3
3
3
3
3
6 9
6 9
5.42
5.42
6
6
6
6
9
95.42
66
6
6
6
6
303 9
3 9
6
65.42
66
3
3
3
3
6
6
6
65.42
66
9 9
9 95.42
66
33
3 3 9
3 3 9
6
65.42
66
3
3
9 9
9 95.42
66
9
9
6
6
6
65.42
66
Crane SpecificationsBoom and Crane Jib Configurations
SPECIFICATIONSSCX700E
9
Jib Pendant Rope
Length (m) Rope Diameter (mm) Imprint
2.85 20 □・△・20・2.85・C8.45 20 □・△・20・8.45・C13.9 20 □・△・20・13.9・C20.8 20 □・△・20・20.8・C
Crane Jib (Offset Angle 10° and 30°)Crane Jib Length (m) Offset Angle Crane Jib Configurations
9
10° 4.54.5
13.920.8
30° 4.54.5
13.9
2.85
20.8
13.5
10°4.54.5
4.5
13.9
20.8 8.45
30°4.54.5
4.5
13.9
2.85
20.8 8.45
18
10°4.54.5
4.54.5
13.9
20.88.45
8.45
30°4.54.5
4.54.5
13.9
2.85
20.88.45
8.45
Dimensions Not Shown In The Figure
Symbols Jib Length (m)
4.5 4.50
Combination of Boom and Crane Jib (Offset Angle 10° and 30°)Boom Length (m) 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54
Jib Length (m
)
9
13.5
18( : Attachable : Not Attachable )
Combination of Boom and Crane Jib (Offset Angle 10° and 30°)
Check the pendant rope with referring to the imprints on the rope end.
Crane SpecificationsCombination of Boom and Crane Jib (Offset Angle 10° and 30°)
SPECIFICATIONS SCX700E
10
Working Ranges
Main Boom
1.00 m
1.75
m
5 10 15 20 25 30 35 400 45
5
10
15
20
25
30
35
40
45
50
55
60
30°
37°
42°
80°
15 m
18 m
21 m
24 m
27 m
30 m
33 m
36 m
39 m
42 m
45 m
48 m
51 m
54 m
12 m
4.8
m
4.7
m
5.0
m
Maximum Boom Angle
Minimum Boom Angle
70 t Hook 40 t Hook 15 t Hook
Height A
bove Ground
(m)
Working Radius (m)
Crane SpecificationsWorking Ranges
SPECIFICATIONSSCX700E
11
Crane SpecificationsWorking Ranges
SPECIFICATIONS SCX700E
Aux. Sheave
5 10 15 20 25 30 35 400 45
5
10
15
20
25
30
35
40
45
50
55
1.00 m
1.75
m
15 m
18 m
21 m
24 m
27 m
30 m
33 m
36 m
39 m
42 m
45 m
48 m
51 m
12 m
30°
34°
41°
80°
3.5
m
Maximum Boom Angle
Minimum Boom Angle
Height A
bove Ground
(m)
Working Radius (m)
12
Crane Jib
5 10 15 20 25 30 35 400 45
5
10
15
20
25
30
35
40
45
50
55
65
60
1.00 m
1.75
m
27 m
30 m
33 m
36 m
39 m
42 m
45 m
30°
35°36°
41°42°
10°
30°
80°
3.5
m
Minimum Boom Angle
Maximum Boom Angle
9 m Crane Jib Offset Angle 10°
9 m Crane Jib Offset Angle 30°
Height A
bove Ground
(m)
Working Radius (m)
Crane SpecificationsWorking Ranges
SPECIFICATIONSSCX700E
13
27 m
30 m
33 m
36 m
39 m
42 m
45 m
1.00 m
1.75
m30°
10°
80°
30°
41°40°
33°32°
47°46°
5 10 15 20 25 30 35 40 500 45
5
10
15
20
25
30
35
40
45
50
55
65
60
3.5
m
Crane Jib
Crane SpecificationsWorking Ranges
SPECIFICATIONS SCX700E
Minimum Boom Angle
Maximum Boom Angle
13.5 m Crane Jib Offset Angle 10°
13.5 m Crane Jib Offset Angle 30°
Height A
bove Ground
(m)
Working Radius (m)
14
27 m
30 m
33 m
36 m
39 m
42 m
45 m
5 10 15 20 25 30 35 40 500 45
5
10
15
20
25
30
35
40
45
50
55
65
60
30°
41°
32°
39°
45°
46°
49°
51°
80°
10°
30°
1.00 m
1.75
m
3.5
m
Crane Jib
Crane SpecificationsWorking Ranges
SPECIFICATIONSSCX700E
Minimum Boom Angle
Maximum Boom Angle
18 m Crane Jib Offset Angle 10°
18 m Crane Jib Offset Angle 30°
Height A
bove Ground
(m)
Working Radius (m)
15
Crane SpecificationsGross Rated Load Table
SPECIFICATIONS SCX700E
Gross Rated Load Table
Main Boom
Unit: tonWorking Boom length (m)
Radius(m) 12 15 18 21 24 27 30 333.7 70.00 3.74.0 65.25 62.10/4.2 4.04.5 58.30 58.15 54.50/4.8 4.55.0 52.45 51.85 51.30 46.40/5.3 5.05.5 45.10 44.65 44.25 43.85 40.20/5.8 5.56.0 39.50 39.15 38.80 38.50 38.20 34.60/6.4 30.90/6.9 6.07.0 31.50 31.25 31.05 30.80 30.60 30.40 30.25 27.30/7.5 7.08.0 26.15 25.95 25.75 25.60 25.40 25.25 25.15 24.95 8.09.0 22.25 22.10 21.90 21.80 21.65 21.50 21.40 21.25 9.010.0 19.35 19.20 19.00 18.90 18.75 18.70 18.60 18.40 10.012.0 16.00/11.6 15.10 14.95 14.85 14.70 14.65 14.55 14.40 12.014.0 12.40 12.25 12.15 12.00 11.95 11.85 11.70 14.016.0 12.20/14.2 10.30 10.20 10.05 10.00 9.90 9.75 16.018.0 9.70 /16.8 8.75 8.60 8.55 8.45 8.30 18.020.0 7.90 /19.4 7.45 7.40 7.30 7.15 20.022.0 6.55 6.50 6.40 6.25 22.024.0 5.75 5.65 5.50 24.026.0 5.60 /24.5 5.05 4.90 26.028.0 4.80 /27.1 4.40 28.030.0 4.00 /29.7 30.0
Unit: tonWorking Boom length (m)
Radius(m) 36 39 42 45 48 51 548.0 24.80 22.40/8.69.0 21.15 21.00 19.50/9.1 18.80/9.710.0 18.35 18.20 18.10 18.00 17.10/10.2 15.00/10.8 13.00/11.312.0 14.35 14.25 14.15 14.05 13.90 13.80 12.9514.0 11.65 11.55 11.45 11.35 11.25 11.10 11.1516.0 9.70 9.60 9.55 9.45 9.35 9.20 9.2018.0 8.25 8.15 8.10 8.00 7.85 7.75 7.7520.0 7.10 7.00 6.95 6.85 6.75 6.60 6.6022.0 6.20 6.10 6.00 5.90 5.80 5.70 5.6524.0 5.45 5.35 5.25 5.15 5.05 4.95 4.9026.0 4.85 4.70 4.65 4.55 4.45 4.30 4.3028.0 4.30 4.20 4.10 4.00 3.90 3.80 3.7530.0 3.85 3.75 3.65 3.55 3.45 3.30 3.2532.0 3.50 3.35 3.25 3.15 3.05 2.85 2.8034.0 3.50 /32.3 3.05 2.90 2.80 2.65 2.50 2.4536.0 2.90 /34.9 2.60 2.45 2.30 2.15 2.1038.0 2.40 /37.5 2.15 2.00 1.85 1.8040.0 1.90 1.75 1.60 1.5042.0 1.90 /40.1 1.50 1.35 1.30 /41.944.0 1.50 /42.7 1.30 /42.1
1. Capacities are the maximum allowable and based on machine standing level on firm supporting surface under ideal job conditions.2. Capacities are in metric tones, and are not more than 78% of minimum tipping loads except the figures surrounded by bold lines
Notes:
which are based on other factor of machine structural strength limitation; the design codes/standards applied to the capacitie areare from "Construction Codes for Mobile Crane" and "Ordinance on Safety of Crane and Similar Equipment" issued by Ministry ofHealth, Labour and Welfare, Japan.
3. Capacities are based on freely suspended loads and make no allowance for such factors as the effect of wind, sudden stop of loads,supporting surface conditions and operating speed. Operator must reduce load ratings to take such conditions into account.
4. Deduction from rated capacities must be made for weight of hook block, hook ball, sling, spreader bar or any suspended gear.5. 23.0ton counter weight is required for all capacities on this chart.
WorkingRadius(m)8.09.010.012.014.016.018.020.022.024.026.028.030.032.0
42.044.0
34.036.038.040.0
10 Parts 9 Parts 8 Parts 7 Parts 6 Parts 5 Parts 4 Parts 3 Parts 2 Parts 1 Part
70t 5 sheaves 0.80 70.0 58.5 52.0 45.5 39.0 32.5 26.0 19.5 13.0 -
40t 3 sheaves 0.41 - - - 40.0 39.0 32.5 26.0 19.5 13.0 -
15t 1 sheave 0.32 - - - - - - - 15.0 13.0 -
6.5t 0.18 - - - - - - - - - 6.5
Hook CapacityHook
Weight (t)Maximum Rated Load (t)
WorkingRadius(m)
16
Aux. Sheave
Unit: tonBoom length (m)
12 15 18 21 24 27 30 334.4 6.50 4.44.5 6.50 4.55.0 6.50 6.50 5.05.5 6.50 6.50 6.50 5.56.0 6.50 6.50 6.50 6.50 /6.1 6.50 /6.6 6.07.0 6.50 6.50 6.50 6.50 6.50 6.50 /7.2 6.50 /7.7 7.08.0 6.50 6.50 6.50 6.50 6.50 6.50 6.50 6.50 /8.3 8.09.0 6.50 6.50 6.50 6.50 6.50 6.50 6.50 6.50 9.010.0 6.50 6.50 6.50 6.50 6.50 6.50 6.50 6.50 10.012.0 6.50 6.50 6.50 6.50 6.50 6.50 6.50 6.50 12.014.0 6.50 /12.6 6.50 6.50 6.50 6.50 6.50 6.50 6.50 14.016.0 6.50 /15.2 6.50 6.50 6.50 6.50 6.50 6.50 16.018.0 6.50 /17.8 6.50 6.50 6.50 6.50 6.50 18.020.0 6.50 6.50 6.50 6.50 6.50 20.022.0 6.50 /20.4 6.50 6.40 6.35 6.20 22.024.0 6.10 /23.0 5.65 5.55 5.45 24.026.0 5.20 /25.6 4.95 4.80 26.028.0 4.40 4.25 28.030.0 4.40 /28.2 3.80 30.032.0 3.70 /30.8 32.0
Unit: tonBoom length (m)
36 39 42 45 48 518.0 6.50 /8.89.0 6.50 6.50 /9.4 6.50 /9.910.0 6.50 6.50 6.50 6.50 /10.5 6.50 /11.0 6.50 /11.612.0 6.50 6.50 6.50 6.50 6.50 6.5014.0 6.50 6.50 6.50 6.50 6.50 6.5016.0 6.50 6.50 6.50 6.50 6.50 6.5018.0 6.50 6.50 6.50 6.50 6.50 6.5020.0 6.50 6.50 6.50 6.50 6.50 6.5022.0 6.15 6.05 5.95 5.85 5.75 5.6524.0 5.35 5.25 5.20 5.10 5.00 4.8526.0 4.75 4.60 4.55 4.45 4.35 4.2028.0 4.20 4.10 4.00 3.90 3.80 3.6530.0 3.75 3.60 3.55 3.40 3.30 3.1532.0 3.35 3.20 3.10 3.00 2.85 2.6534.0 3.10 /33.4 2.85 2.70 2.60 2.45 2.3036.0 2.50 2.40 2.25 2.10 1.9538.0 2.10 1.95 1.80 1.6540.0 2.00 /38.6 1.70 1.55 1.3542.0 1.60 /41.2 1.30 1.30 /40.6
Notes:1. Capacities are the maximum allowable and based on machine standing level on firm supporting surface under ideal job conditions.2. Capacities are in metric tones, and are not more than 78% of minimum tipping loads except the figures surrounded by bold lines
which are based on other factor of machine structural strength limitation; the design codes/standards applied to the capacitie areare from "Construction Codes for Mobile Crane" and "Ordinance on Safety of Crane and Similar Equipment" issued by Ministry ofHealth, Labour and Welfare, Japan.
3. Capacities are based on freely suspended loads and make no allowance for such factors as the effect of wind, sudden stop of loads,supporting surface conditions and operating speed. Operator must reduce load ratings to take such conditions into account.
4. Deduction from rated capacities must be made for weight of hook block, hook ball, sling, spreader bar or any suspended gear.5. 23.0ton counter weight is required for all capacities on this chart.
38.040.042.0
30.032.034.036.0
22.024.026.028.0
14.016.018.020.0
8.09.010.012.0
10 Parts 9 Parts 8 Parts 7 Parts 6 Parts 5 Parts 4 Parts 3 Parts 2 Parts 1 Part70t 5 sheaves 0.80 70.0 58.5 52.0 45.5 39.0 32.5 26.0 19.5 13.0 -40t 3 sheaves 0.41 - - - 40.0 39.0 32.5 26.0 19.5 13.0 -15t 1 sheave 0.32 - - - - - - - 15.0 13.0 -6.5t 0.18 - - - - - - - - - 6.5
Hook Capacity HookWeight (t)
Maximum Rated Load (t)
WorkingRadius(m)
WorkingRadius(m)
WorkingRadius(m)
WorkingRadius(m)
Crane SpecificationsGross Rated Load Table
SPECIFICATIONSSCX700E
17
Crane SpecificationsGross Rated Load Table
SPECIFICATIONS SCX700E
Main Boom with Aux. Sheave
Unit: ton
12 15 18 21 24 27 30 333.7 69.80 3.74.0 64.85 61.70/4.2 4.04.5 57.90 57.75 54.10/4.8 4.55.0 52.25 51.65 51.05 46.20/5.3 5.05.5 44.90 44.45 44.00 43.60 39.90/5.8 5.56.0 39.30 38.90 38.60 38.30 37.95 34.30/6.4 30.60/6.9 6.07.0 31.30 31.05 30.80 30.60 30.35 30.20 30.00 27.00/7.5 7.08.0 25.95 25.70 25.50 25.35 25.20 25.05 24.90 24.70 8.09.0 22.05 21.85 21.70 21.55 21.40 21.30 21.20 21.00 9.010.0 19.15 18.95 18.80 18.70 18.55 18.45 18.35 18.20 10.012.0 15.80/11.6 14.90 14.75 14.65 14.50 14.40 14.35 14.20 12.014.0 12.20 12.05 11.90 11.80 11.70 11.65 11.50 14.016.0 12.00/14.2 10.10 10.00 9.85 9.75 9.70 9.55 16.018.0 9.50 /16.8 8.55 8.40 8.30 8.25 8.10 18.020.0 7.80 /19.4 7.25 7.20 7.10 6.95 20.022.0 6.35 6.30 6.20 6.05 22.024.0 5.55 5.45 5.30 24.026.0 5.40 /24.5 4.85 4.70 26.028.0 4.60 /27.1 4.15 28.030.0 3.80 /29.7 30.0
Unit: ton
36 39 42 45 48 518.0 24.55 22.10/8.69.0 20.90 20.75 19.50/9.1 18.50/9.710.0 18.10 17.95 17.85 17.70 16.40/10.2 14.40/10.812.0 14.10 14.00 13.90 13.80 13.65 13.5014.0 11.40 11.30 11.20 11.10 11.00 10.8516.0 9.50 9.35 9.30 9.20 9.05 8.9018.0 8.00 7.90 7.80 7.70 7.60 7.4520.0 6.90 6.75 6.70 6.60 6.45 6.3522.0 5.95 5.85 5.75 5.65 5.55 5.4024.0 5.20 5.10 5.00 4.90 4.80 4.6526.0 4.60 4.50 4.40 4.30 4.20 4.0528.0 4.10 3.95 3.85 3.75 3.65 3.4530.0 3.65 3.50 3.40 3.25 3.15 2.9532.0 3.25 3.10 3.00 2.85 2.70 2.5034.0 3.20 /32.3 2.75 2.60 2.45 2.30 2.1536.0 2.60 /34.9 2.25 2.15 2.00 1.8038.0 2.10 /37.5 1.85 1.70 1.5040.0 1.60 1.45 1.30 /39.842.0 1.60 /40.1 1.30 /41.3
Notes:1. Capacities are the maximum allowable and based on machine standing level on firm supporting surface under ideal job conditions.2. Capacities are in metric tones, and are not more than 78% of minimum tipping loads except the figures surrounded by bold lines which are based on other factor of machine structural strength limitation; the design codes/standards applied to the capacitie are are from "Construction Codes for Mobile Crane" and "Ordinance on Safety of Crane and Similar Equipment" issued by Ministry of Health, Labour and Welfare, Japan. 3. Capacities are based on freely suspended loads and make no allowance for such factors as the effect of wind, sudden stop of loads, supporting surface conditions and operating speed. Operator must reduce load ratings to take such conditions into account.4. Deduction from rated capacities must be made for weight of hook block, hook ball, sling, spreader bar or any suspended gear.5. 23.0ton counter weight is required for all capacities on this chart.
8.0
WorkingRadius(m)
WorkingRadius(m)
WorkingRadius(m)
WorkingRadius(m)
9.010.0
12.014.016.018.020.022.024.026.028.030.0
40.042.0
Boom length (m)
Boom length (m)
32.034.036.038.0
10 Parts 9 Parts 8 Parts 7 Parts 6 Parts 5 Parts 4 Parts 3 Parts 2 Parts 1 Part70t 5 sheaves 0.80 70.0 58.5 52.0 45.5 39.0 32.5 26.0 19.5 13.0 -40t 3 sheaves 0.41 - - - 40.0 39.0 32.5 26.0 19.5 13.0 -15t 1 sheave 0.32 - - - - - - - 15.0 13.0 -6.5t 0.18 - - - - - - - - - 6.5
Hook Capacity HookWeight (t)
Maximum Rated Load (t)
18
Crane Jib
Unit tonBoom length (m) 27 Boom length (m)
Jib length (m) 9 13.5 18 Jib length (m)Offset angle (deg) Offset angle (deg)
Radius (m) Radius (m)9.4 6.50 9.410.0 6.50 6.50 /11.0 10.012.0 6.50 6.50 /12.1 6.50 5.90 /12.6 12.014.0 6.50 6.50 6.50 6.50 /15.0 5.70 14.016.0 6.50 6.50 6.50 6.25 5.40 4.30 /17.9 16.018.0 6.50 6.50 6.50 5.85 5.15 4.30 18.020.0 6.50 6.50 6.50 5.50 4.95 4.15 20.022.0 6.45 6.50 6.50 5.20 4.75 4.05 22.024.0 5.70 5.80 5.80 4.95 4.55 3.80 24.026.0 5.05 5.15 5.15 4.70 4.40 3.60 26.028.0 4.50 4.60 4.60 4.50 4.25 3.45 28.030.0 4.05 4.10 4.15 4.30 4.10 3.30 30.032.0 3.65 3.70 3.75 3.85 3.80 3.15 32.034.0 3.50 /33.2 3.40 /33.8 3.40 3.50 3.45 3.05 34.036.0 3.10 3.15 3.15 2.95 36.038.0 2.90 /37.5 2.85 2.90 2.85 38.040.0 2.80 /38.3 2.65 2.70 40.042.0 2.50 /41.7 2.45 42.042.8 2.40 42.8
Unit tonBoom length (m) 30 Boom length (m)
Jib length (m) 9 13.5 18 Jib length (m)Offset angle (deg) Offset angle (deg)
Radius (m) Radius (m)9.9 6.50 9.910.0 6.50 6.50 /11.5 10.012.0 6.50 6.50 /12.6 6.50 5.90 /13.1 12.014.0 6.50 6.50 6.50 6.50 /15.6 5.80 14.016.0 6.50 6.50 6.50 6.35 5.50 16.018.0 6.50 6.50 6.50 6.00 5.25 4.30 /18.5 18.020.0 6.50 6.50 6.50 5.65 5.05 4.20 20.022.0 6.35 6.50 6.45 5.35 4.85 4.10 22.024.0 5.60 5.75 5.70 5.10 4.65 3.90 24.026.0 4.95 5.10 5.05 4.85 4.50 3.70 26.028.0 4.40 4.50 4.50 4.65 4.35 3.55 28.030.0 3.95 4.05 4.05 4.20 4.15 3.40 30.032.0 3.55 3.60 3.65 3.80 3.70 3.25 32.034.0 3.20 3.25 3.30 3.40 3.35 3.15 34.036.0 2.90 /35.8 2.95 3.00 3.10 3.05 3.00 36.038.0 2.80 /36.4 2.70 2.80 2.80 2.90 38.040.0 2.45 2.50 2.55 2.65 40.042.0 2.40 /40.1 2.30 /40.9 2.30 2.40 42.044.0 2.05 2.15 44.046.0 2.00 /44.3 1.90 /45.4 46.0
Notes:1. Capacities are the maximum allowable and based on machine standing level on firm supporting surface under ideal job conditions.2. Capacities are in metric tones, and are not more than 78% of minimum tipping loads except the figures surrounded by bold lines which are based on other factor of machine structural strength limitation; the design codes/standards applied to the capacitie are are from "Construction Codes for Mobile Crane" and "Ordinance on Safety of Crane and Similar Equipment" issued by Ministry of Health, Labour and Welfare, Japan. 3. Capacities are based on freely suspended loads and make no allowance for such factors as the effect of wind, sudden stop of loads, supporting surface conditions and operating speed. Operator must reduce load ratings to take such conditions into account.4. Deduction from rated capacities must be made for weight of hook block, hook ball, sling, spreader bar or any suspended gear.5. 23.0ton counter weight is required for all capacities on this chart.
10 3010 30 10 30
10 3010 30 10 30
10 Parts 9 Parts 8 Parts 7 Parts 6 Parts 5 Parts 4 Parts 3 Parts 2 Parts 1 Part70t 5 sheaves 0.80 70.0 58.5 52.0 45.5 39.0 32.5 26.0 19.5 13.0 -40t 3 sheaves 0.41 - - - 40.0 39.0 32.5 26.0 19.5 13.0 -15t 1 sheave 0.32 - - - - - - - 15.0 13.0 -6.5t 0.18 - - - - - - - - - 6.5
Hook Capacity HookWeight (t)
Maximum Rated Load (t)
Crane SpecificationsGross Rated Load Table
SPECIFICATIONSSCX700E
19
Crane SpecificationsGross Rated Load Table
SPECIFICATIONS SCX700E
Crane Jib
Unit tonBoom length (m) 33 Boom length (m)
Jib length (m) 9 13.5 18 Jib length (m)Offset angle (deg) Offset angle (deg)
Radius (m) Radius (m)10.5 6.50 10.512.0 6.50 6.50 /13.2 6.50 /12.1 5.90 /13.6 12.014.0 6.50 6.50 6.50 5.85 14.016.0 6.50 6.50 6.50 6.50 /16.1 5.60 16.018.0 6.50 6.50 6.50 6.10 5.35 4.30 /19.0 18.020.0 6.50 6.50 6.50 5.75 5.15 4.20 20.022.0 6.20 6.45 6.35 5.50 4.95 4.10 22.024.0 5.45 5.65 5.55 5.20 4.75 4.00 24.026.0 4.80 4.95 4.95 5.00 4.60 3.80 26.028.0 4.25 4.40 4.40 4.60 4.45 3.60 28.030.0 3.80 3.90 3.90 4.10 4.00 3.45 30.032.0 3.40 3.50 3.50 3.65 3.60 3.35 32.034.0 3.05 3.15 3.15 3.30 3.25 3.20 34.036.0 2.75 2.80 2.85 2.95 2.90 3.10 36.038.0 2.45 2.50 2.55 2.65 2.65 2.80 38.040.0 2.30 /38.4 2.20 /39.0 2.30 2.35 2.35 2.55 40.042.0 2.05 2.10 2.10 2.25 42.044.0 1.90 /42.7 1.90 /43.5 1.90 2.00 44.046.0 1.70 1.75 46.048.0 1.60 /46.9 1.50 48.0
Unit tonBoom length (m) 36 Boom length (m)
Jib length (m) 9 13.5 18 Jib length (m)Offset angle (deg) Offset angle (deg)
Radius (m) Radius (m)11.0 6.50 11.012.0 6.50 6.50 /13.7 6.50 /12.6 12.014.0 6.50 6.50 6.50 5.90 /14.2 14.016.0 6.50 6.50 6.50 6.50 /16.7 5.65 16.018.0 6.50 6.50 6.50 6.20 5.45 4.30 /19.6 18.020.0 6.50 6.50 6.50 5.90 5.20 4.25 20.022.0 6.15 6.35 6.25 5.60 5.05 4.15 22.024.0 5.35 5.55 5.50 5.35 4.85 4.05 24.026.0 4.75 4.90 4.85 5.10 4.70 3.85 26.028.0 4.20 4.35 4.30 4.55 4.40 3.70 28.030.0 3.70 3.85 3.85 4.05 3.90 3.55 30.032.0 3.30 3.45 3.45 3.60 3.50 3.40 32.034.0 2.95 3.05 3.05 3.25 3.15 3.30 34.036.0 2.65 2.70 2.75 2.90 2.85 3.05 36.038.0 2.35 2.40 2.45 2.60 2.55 2.75 38.040.0 2.05 2.10 2.15 2.30 2.25 2.45 40.042.0 1.80 /41.0 1.80 /41.6 1.90 2.00 2.00 2.15 42.044.0 1.70 1.75 1.80 1.90 44.046.0 1.50 /45.3 1.55 1.55 1.70 46.048.0 1.50 /46.1 1.40 1.45 48.050.0 1.30 /49.2 1.30 /49.9 50.0
10 3010 30 10 30
10 3010 30 10 30
20
Crane Jib
Unit: tonBoom length (m) 39 Boom length (m)
Jib length (m) 9 13.5 18 Jib length (m)Offset angle (deg) Offset angle (deg)
Radius (m) Radius (m)11.6 6.50 11.612.0 6.50 6.50 /13.2 12.014.0 6.50 6.50 /14.3 6.50 5.90 /14.7 14.016.0 6.50 6.50 6.50 6.50 /17.2 5.75 16.018.0 6.50 6.50 6.50 6.30 5.50 18.020.0 6.50 6.50 6.50 6.00 5.30 4.30 /20.1 20.022.0 6.00 6.25 6.15 5.70 5.10 4.15 22.024.0 5.25 5.45 5.40 5.45 4.95 4.05 24.026.0 4.60 4.80 4.75 5.05 4.75 3.95 26.028.0 4.05 4.25 4.20 4.45 4.30 3.80 28.030.0 3.60 3.75 3.70 3.95 3.80 3.65 30.032.0 3.20 3.30 3.30 3.50 3.40 3.50 32.034.0 2.85 2.95 2.95 3.15 3.05 3.30 34.036.0 2.50 2.60 2.60 2.80 2.70 2.95 36.038.0 2.15 2.25 2.30 2.45 2.40 2.65 38.040.0 1.90 1.95 2.00 2.15 2.10 2.35 40.042.0 1.65 1.70 1.75 1.90 1.85 2.05 42.044.0 1.30 /43.6 1.45 1.55 1.65 1.65 1.80 44.046.0 1.30 /44.2 1.35 1.40 1.40 1.55 46.048.0 1.30 /46.7 1.30 /47.3 1.30 /47.5 1.35 48.048.7 1.30 48.7
Unit: tonBoom length (m) 42 Boom length (m)
Jib length (m) 9 13.5 18 Jib length (m)Offset angle (deg) Offset angle (deg)
Radius (m) Radius (m)12.0 6.50 /12.1 6.50 /13.7 12.014.0 6.50 6.50 /14.8 6.50 5.90 /15.3 14.016.0 6.50 6.50 6.50 6.50 /17.7 5.80 16.018.0 6.50 6.50 6.50 6.40 5.60 18.020.0 6.50 6.50 6.50 6.10 5.35 4.30 /20.7 20.022.0 5.95 6.20 6.05 5.80 5.20 4.20 22.024.0 5.15 5.40 5.30 5.55 5.00 4.10 24.026.0 4.50 4.75 4.65 4.95 4.75 4.00 26.028.0 4.00 4.15 4.10 4.40 4.20 3.85 28.030.0 3.50 3.65 3.65 3.90 3.70 3.70 30.032.0 3.10 3.25 3.20 3.45 3.30 3.55 32.034.0 2.70 2.85 2.85 3.05 2.95 3.25 34.036.0 2.35 2.50 2.50 2.70 2.60 2.90 36.038.0 2.05 2.15 2.15 2.35 2.25 2.55 38.040.0 1.75 1.85 1.90 2.05 2.00 2.25 40.042.0 1.50 1.60 1.65 1.80 1.75 1.95 42.044.0 1.30 1.35 1.40 1.55 1.50 1.70 44.046.0 1.30 /44.2 1.30 /44.6 1.30 /45.2 1.30 1.30 1.45 46.048.0 1.30 /46.2 1.30 /46.1 1.30 /47.7 48.0
10 3010 30 10 30
10 3010 30 10 30
Crane SpecificationsGross Rated Load Table
SPECIFICATIONSSCX700E
21
Crane SpecificationsGross Rated Load Table
SPECIFICATIONS SCX700E
Crane Jib
Unit: tonBoom length (m) 45 Boom length (m)
Jib length (m) 9 13.5 18 Jib length (m)Offset angle (deg) Offset angle (deg)
Radius (m) Radius (m)12.7 6.50 12.714.0 6.50 6.50 /15.4 6.50 /14.3 5.90 /15.8 14.016.0 6.50 6.50 6.50 5.85 16.018.0 6.50 6.50 6.50 6.50 /18.3 5.65 18.020.0 6.50 6.50 6.50 6.15 5.45 4.30 /21.2 20.022.0 5.80 6.10 5.95 5.90 5.25 4.20 22.024.0 5.05 5.30 5.20 5.55 5.10 4.10 24.026.0 4.40 4.65 4.55 4.90 4.65 4.05 26.028.0 3.85 4.05 4.00 4.30 4.10 3.90 28.030.0 3.40 3.60 3.50 3.80 3.60 3.75 30.032.0 2.95 3.15 3.10 3.35 3.20 3.55 32.034.0 2.55 2.75 2.70 2.95 2.80 3.15 34.036.0 2.20 2.35 2.35 2.60 2.45 2.80 36.038.0 1.90 2.05 2.05 2.25 2.15 2.45 38.040.0 1.65 1.75 1.75 1.95 1.85 2.15 40.042.0 1.40 1.45 1.50 1.65 1.60 1.85 42.044.0 1.30 /42.9 1.30 /43.6 1.30 /43.9 1.40 1.35 1.60 44.046.0 1.30 /45.2 1.30 /44.8 1.35 46.046.7 1.30 46.7
10 3010 30 10 30
22
Unit tonBoom length (m) 27 Boom length (m)
Jib length (m) 9 13.5 18 Jib length (m)Offset angle (deg) Offset angle (deg)
Radius (m) Radius (m)6.4 33.80 33.60 33.50 33.10 33.10 32.50 6.47.0 29.65 29.45 29.35 28.95 29.00 28.40 7.08.0 24.50 24.30 24.20 23.85 23.85 23.35 8.09.0 20.75 20.55 20.45 20.15 20.10 19.70 9.010.0 17.90 17.75 17.60 17.35 17.25 16.95 10.012.0 13.85 13.75 13.55 13.40 13.25 13.00 12.014.0 11.10 11.05 10.85 10.70 10.55 10.35 14.016.0 9.20 9.10 8.90 8.80 8.60 8.45 16.018.0 7.70 7.65 7.45 7.40 7.15 7.05 18.020.0 6.60 6.55 6.35 6.25 6.05 5.95 20.022.0 5.65 5.65 5.45 5.40 5.15 5.10 22.024.0 4.95 4.90 4.70 4.70 4.45 4.40 24.024.5 4.80 4.80 4.60 4.50 4.30 4.30 24.5
Unit tonBoom length (m) 30 Boom length (m)
Jib length (m) 9 13.5 18 Jib length (m)Offset angle (deg) Offset angle (deg)
Radius (m) Radius (m)6.9 30.10 29.90 29.80 29.40 29.50 28.90 6.97.0 29.50 29.25 29.20 28.80 28.85 28.25 7.08.0 24.35 24.15 24.05 23.75 23.75 23.25 8.09.0 20.65 20.45 20.35 20.05 20.05 19.60 9.010.0 17.80 17.65 17.50 17.30 17.20 16.85 10.012.0 13.75 13.65 13.50 13.30 13.20 12.95 12.014.0 11.05 10.95 10.80 10.65 10.50 10.30 14.016.0 9.10 9.05 8.85 8.75 8.60 8.40 16.018.0 7.65 7.60 7.40 7.30 7.10 7.00 18.020.0 6.50 6.45 6.25 6.20 6.00 5.90 20.022.0 5.60 5.55 5.35 5.30 5.10 5.00 22.024.0 4.85 4.80 4.60 4.60 4.35 4.30 24.026.0 4.25 4.20 4.00 4.00 3.70 3.65 26.027.1 4.00 4.00 3.70 3.70 3.40 3.40 27.1
Notes:1. Capacities are the maximum allowable and based on machine standing level on firm supporting surface under ideal job conditions.2. Capacities are in metric tones, and are not more than 78% of minimum tipping loads except the figures surrounded by bold lines
which are based on other factor of machine structural strength limitation; the design codes/standards applied to the capacitie areare from "Construction Codes for Mobile Crane" and "Ordinance on Safety of Crane and Similar Equipment" issued by Ministry ofHealth, Labour and Welfare, Japan.
3. Capacities are based on freely suspended loads and make no allowance for such factors as the effect of wind, sudden stop of loads,supporting surface conditions and operating speed. Operator must reduce load ratings to take such conditions into account.
4. Deduction from rated capacities must be made for weight of hook block, hook ball, sling, spreader bar or any suspended gear.5. 23.0ton counter weight is required for all capacities on this chart.
10 3010 30 10 30
10 30 10 30 10 30
10 Parts 9 Parts 8 Parts 7 Parts 6 Parts 5 Parts 4 Parts 3 Parts 2 Parts 1 Part70t 5 sheaves 0.80 70.0 58.5 52.0 45.5 39.0 32.5 26.0 19.5 13.0 -40t 3 sheaves 0.41 - - - 40.0 39.0 32.5 26.0 19.5 13.0 -15t 1 sheave 0.32 - - - - - - - 15.0 13.0 -6.5t 0.18 - - - - - - - - - 6.5
Hook Capacity HookWeight (t)
Maximum Rated Load (t)
Main Boom with Crane Jib
Crane SpecificationsGross Rated Load Table
SPECIFICATIONSSCX700E
23
Crane SpecificationsGross Rated Load Table
SPECIFICATIONS SCX700E
Unit tonBoom length (m) 33 Boom length (m)
Jib length (m) 9 13.5 18 Jib length (m)Offset angle (deg) Offset angle (deg)
Radius (m) Radius (m)7.5 26.50 26.30 26.20 25.90 25.90 25.40 7.58.0 24.15 23.95 23.90 23.55 23.55 23.05 8.09.0 20.45 20.30 20.20 19.90 19.90 19.45 9.010.0 17.65 17.50 17.35 17.10 17.05 16.70 10.012.0 13.60 13.50 13.35 13.20 13.10 12.80 12.014.0 10.90 10.80 10.65 10.50 10.40 10.15 14.016.0 8.95 8.90 8.75 8.60 8.45 8.30 16.018.0 7.50 7.45 7.25 7.15 7.00 6.85 18.020.0 6.35 6.30 6.15 6.05 5.85 5.75 20.022.0 5.45 5.40 5.20 5.15 4.95 4.90 22.024.0 4.70 4.70 4.50 4.45 4.20 4.10 24.026.0 4.10 4.05 3.85 3.80 3.55 3.45 26.028.0 3.55 3.50 3.25 3.25 2.95 2.90 28.029.7 3.20 3.10 2.90 2.90 2.60 2.60 29.7
Unit tonBoom length (m) 36 Boom length (m)
Jib length (m) 9 13.5 18 Jib length (m)Offset angle (deg) Offset angle (deg)
Radius (m) Radius (m)8.0 24.05 23.85 23.80 23.45 23.50 22.95 8.09.0 20.35 20.20 20.10 19.80 19.80 19.40 9.010.0 17.55 17.40 17.30 17.05 17.00 16.65 10.012.0 13.55 13.45 13.30 13.10 13.05 12.75 12.014.0 10.85 10.75 10.60 10.45 10.35 10.10 14.016.0 8.90 8.85 8.70 8.55 8.40 8.25 16.018.0 7.45 7.40 7.20 7.10 6.95 6.80 18.020.0 6.30 6.25 6.10 6.00 5.85 5.70 20.022.0 5.40 5.35 5.15 5.10 4.90 4.80 22.024.0 4.65 4.60 4.45 4.35 4.15 4.05 24.026.0 4.05 4.00 3.75 3.70 3.45 3.40 26.028.0 3.45 3.40 3.20 3.15 2.90 2.80 28.030.0 2.95 2.95 2.70 2.65 2.40 2.35 30.032.0 2.55 2.50 2.30 2.25 2.00 1.95 32.032.3 2.50 2.50 2.20 2.20 2.00 1.90 32.3
Unit tonBoom length (m) 39 Boom length (m)
Jib length (m) 9 13.5 18 Jib length (m)Offset angle (deg) Offset angle (deg)
Radius (m) Radius (m)8.6 21.60 21.40 21.30 21.00 21.00 20.60 8.69.0 20.20 20.05 19.95 19.65 19.65 19.25 9.010.0 17.45 17.25 17.15 16.90 16.90 16.50 10.012.0 13.45 13.30 13.20 13.00 12.95 12.65 12.014.0 10.75 10.65 10.50 10.35 10.25 10.00 14.016.0 8.80 8.75 8.60 8.45 8.30 8.10 16.018.0 7.35 7.25 7.10 7.00 6.85 6.70 18.020.0 6.20 6.15 6.00 5.90 5.75 5.60 20.022.0 5.30 5.25 5.05 5.00 4.80 4.70 22.024.0 4.55 4.50 4.30 4.25 4.00 3.90 24.026.0 3.90 3.85 3.65 3.55 3.35 3.25 26.028.0 3.30 3.30 3.05 3.00 2.75 2.70 28.030.0 2.80 2.80 2.55 2.50 2.25 2.20 30.032.0 2.40 2.35 2.15 2.10 1.85 1.80 32.034.0 2.00 2.00 1.75 1.75 1.50 1.45 34.034.9 1.90 1.90 1.60 1.60 1.40 1.30 34.9
10 3010 30 10 30
10 3010 30 10 30
10 3010 30 10 30
Main Boom with Crane Jib
24
Main Boom with Crane Jib
Unit tonBoom length (m) 42 Boom length (m)
Jib length (m) 9 13.5 18 Jib length (m)Offset angle (deg) Offset angle (deg)
Radius (m) Radius (m)9.1 19.50/9.1 19.50/9.1 19.40/9.1 19.20/9.1 18.70/9.1 18.50/9.1 9.110.0 17.35 17.20 17.10 16.85 16.80 16.45 10.012.0 13.35 13.25 13.15 12.90 12.85 12.55 12.014.0 10.70 10.60 10.45 10.30 10.20 9.95 14.016.0 8.75 8.65 8.50 8.35 8.25 8.05 16.018.0 7.25 7.20 7.05 6.95 6.80 6.65 18.020.0 6.15 6.05 5.90 5.80 5.65 5.55 20.022.0 5.20 5.15 5.00 4.90 4.75 4.60 22.024.0 4.45 4.40 4.20 4.15 3.95 3.80 24.026.0 3.80 3.75 3.50 3.45 3.25 3.15 26.028.0 3.20 3.15 2.95 2.85 2.65 2.55 28.030.0 2.70 2.65 2.45 2.40 2.15 2.10 30.032.0 2.25 2.25 2.00 1.95 1.75 1.65 32.034.0 1.90 1.85 1.65 1.60 1.35 1.30 34.036.0 1.55 1.55 1.30 1.30 1.30 /34.5 1.30 /34.2 36.038.0 1.40 /37.5 1.30 /37.5 1.30 /36.2 38.0
Unit tonBoom length (m) 45 Boom length (m)
Jib length (m) 9 13.5 18 Jib length (m)Offset angle (deg) Offset angle (deg)
Radius (m) Radius (m)9.7 17.50 17.40 16.90 16.80 16.30 16.00 9.710.0 17.20 17.05 16.75 16.60 16.15 15.90 10.012.0 13.25 13.15 13.00 12.80 12.75 12.45 12.014.0 10.55 10.45 10.35 10.15 10.10 9.85 14.016.0 8.65 8.55 8.40 8.25 8.15 7.95 16.018.0 7.15 7.10 6.95 6.85 6.70 6.55 18.020.0 6.05 5.95 5.80 5.70 5.60 5.45 20.022.0 5.10 5.05 4.90 4.80 4.65 4.50 22.024.0 4.35 4.30 4.10 4.00 3.80 3.70 24.026.0 3.65 3.60 3.40 3.30 3.10 3.00 26.028.0 3.10 3.05 2.80 2.75 2.55 2.45 28.030.0 2.55 2.55 2.30 2.25 2.05 1.95 30.032.0 2.15 2.10 1.90 1.85 1.60 1.55 32.034.0 1.75 1.75 1.50 1.45 1.30 /33.7 1.30 /33.4 34.036.0 1.45 1.40 1.30 /35.3 1.30 /35.1 36.038.0 1.30 /37.0 1.30 /36.8 38.0
10 3010 30 10 30
10 3010 30 10 30
Crane SpecificationsGross Rated Load Table
SPECIFICATIONSSCX700E
25
Clamshell SpecificationsDimensions and Specifications
A
3280
51956170
3380
C
1750
12000 to 18000 R406550401000
1145
1225
5780
B
Working Radius
HH1
H2D
L 3530
Clamshell SpecificationsBucket Capacity m3 0.8/1.0/1.2Allowable Gross Weight t 6.0Boom Length m 12.00 to 18.00Max. Digging Depth m 36Suspend Line Speed m/min *75
Wire Rope Diameter 22 mmOpen/Close Line Speed m/min *75Boom Hoist Line Speed m/min *62
Wire Rope Diameter 16 mmBoom Lower Line Speed m/min 62Ground Contact Pressure kPa (kgf/cm²) 78.5 (0.80) (w/ 12m Boom + 1.2 m3 Bucket)Operating Weight t 67.3 (w/ 12m Boom + 1.2 m3 Bucket)
NOTE : 1.*Line speeds will vary with the load. 2.Data is expressed in Sl units, followed by conventional units in ( ). 3.Other specifications, not shown are similar to those for the cranes.
Capacity ( m3 ) Weight( t ) A (mm) B (mm) C (mm) H (mm) H1 (mm) Use
0.8 2.00 1880 970 2230 2270 2980 Excavation1.0 2.45 2020 1070 2430 2430 3150 Excavation1.2 3.10 2020 1070 2430 2430 3150 Excavation1.2 2.40 2000 1160 2650 2600 3240 Light Service
Boom Length m 12 15 18Boom Angle ° 35 45 55 65 35 45 55 65 35 45 55 65Working Radius m 11.3 10.0 8.4 6.7 13.7 12.1 10.2 8.0 16.2 14.2 11.9 9.3Allowable Gross Weight t 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0Lifting Height (w/1.2m3 bucket L (D + H2) m 38.8 40.5 41.9 42.9 40.5 42.6 44.3 45.6 44.2 44.7 46.8 48.4Max. Digging Depth D m 36
Dumping Height H2
0.8m3 bucket m 3.2 4.9 6.3 7.3 4.9 7.0 8.7 10.0 6.6 9.1 11.2 12.81.0m3 bucket m 3.0 4.7 6.1 7.1 4.7 6.8 8.5 9.8 6.5 8.9 11.0 12.61.2m3 bucket m 2.8 4.5 5.9 6.9 4.5 6.6 8.3 9.6 6.2 8.7 10.8 12.4
Working Ranges
Specifications Gross Rated Load Table
Clamshell Bucket
1. Working radius is the horizontal distance from the swing center to the gravity of lifted load.2. The rated loads for clamshell do not exceed 70% of tipping load.3. The rated loads shown are upper limits determined by the following equation. Please select a bucket in such a manner that its rated load does not exceed the rated load shown below, according to kinds of the loads handled. Rated load = Bucket capacity (m3) x Specific gravity of load (t/m3) + Bucket weight (t)4. Even if using different capacity of the bucket according to kinds of load, don't exceed the rated load.5. The counter weight is 23.0 t.6. Figures described as ○○ / ○○ in the tables indicate rated load (t) / working radius (m).
Unit ; tWorking Radius
(m) 12.006.7 6.007.0 6.008.0 6.009.0 6.00
10.0 6.0012.0 6.00 / 11.314.016.016.2
6.00 / 13.76.006.00
15.00
6.00
6.00 / 9.36.00 6.00
6.006.00
18.00
6.006.00
Boom Length (m)
Clamshell SpecificationsDimensions and Specifications
SPECIFICATIONS SCX700E
26
Weights and Dimensions of Disassembled UnitsDescription Qty Dimensions (mm) Weight (kg)
Base Crane with :Boom Base
Front Winch Wire RopeBoom hoist wire rope
1
12100
3500
3375 39800
Base Crane with :Front Winch Wire RopeBoom Hoist Wire Rope
1
3500
8065
3375 38300
Counter Weight (Base) 1
3285 750
11158600
Counter Weight (Middle) 1
3285 900
11158400
Counter Weight (Top)(Left Side) 1
945
1115
820
3000
Counter Weight (Top)(Right Side) 1
900
1115
820
3000
Weights and Dimensions of Disassembled UnitsWeights and Dimensions List
Weights and Dimensions of Disassembled UnitsWeights and Dimensions ListTECHNICAL DATASCX700E
Comply with the regulations when transporting."Weight" refers to the mass of each single unit.
27
Weights and Dimensions of Disassembled UnitsWeights and Dimensions List TECHNICAL DATA SCX700E
Weights and Dimensions of Disassembled UnitsDescription Qty Dimensions (mm) Weight (kg)
Upper Spreader 1
1680 275
705250
Boom Basewith Connect Pins
with Boom Back Stops1
6160 1640
1715
1200
Boom topwith Pendant Ropes 1
64151500
1605
1185
Aux. Sheavewith Connect Pin 1
1250 815
850205
3 m Boom Insertwith Connect Pins
without Pendant Ropes1
3115 1515
1570 310
6 m Boom Insertwith Connect Pins
without Pendant Ropes1
1570
6115 1515
520
9 m Boom Insertwith Connect Pins
without Pendant Ropes1
9115 1515
1570 710
28
Weights and Dimensions of Disassembled Units
Description Qty Dimensions (mm) Weight (kg)
Jib Base with :Foot Pin
Connect PinsJib Strut
Connect Pins
1
4615
850
860
475
Jib Top 1
4925
780
1110 250
4.5 m Jib Insertwith Connect Pins 1
4580
640
675
130
70 t Hook 1
1845
660
455
800
40 t Hook 1 1585
620
340
410
15 t Hook 1 1360
620
285
320
6.5 t Hook 1
870
250
180
Weights and Dimensions of Disassembled UnitsWeights and Dimensions ListTECHNICAL DATASCX700E
29
Equipment List Standard and Optional Equipment TECHNICAL DATA SCX700E
Equipment List Standard and Optional Equipment
: Standard : Optional
Item Lift Crane Notes
Basic Items
Winch with Free Mechanism ○ Front and Rear WinchBrake Pedals for Front and Rear Winch ○Crawler Extend / Retract Device ○Working Light (× 2) ○Back Mirror (Left and right) ○Wiper with Washer (Front window) ○Room Lamp ○Cigar Lighter Socket (24 V) ○Ashtray ○Cup Holder ○AM / FM Radio ○Air Conditioner ○ Full AutomaticAccelerator Lever ○Accelerator Pedal (Right side) ○Hydraulic Pump Flow Rate Select Switch ○ Max. or Min. RateElectric Fuel Pump ○Travel Operation Pedal ○Under Cover ● Left SideClear Roof Cover ● Smoke TintedCounter Weight Lifting Wire Rope ○3 m Boom Insert ●6 m Boom Insert ●9 m Boom Insert ●Parts Set for 9 m Crane Jib (9 m Basic jib, Anti-two block, Jib strut) ●4.5 m Crane Jib Insert ●Parts Set for Auxiliary Sheave (Auxiliary sheave, Auxiliary sheave anti-two block) ○70 t Hook (5 sheaves) ●40 t Hook (3 sheaves) ●15 t Hook (1 sheave) ●6.5 t Hook ●Rear Winch Wire Rope ○Spring Type Tagline ●
Meters & Lamps
Coolant Temp.Gauge ○Fuel Gauge ○Hourmeter ○Swing Brake Indicator ○Alternator Indicator ○Engine Oil Pressure Indicator ○Air Filter Restriction Indicator ○Overheat Indicator ○Preheat Indicator ○
Safety
Moment Limiter ○Anti-Two Block ○Boom Hoist Limiting Device ○Secondary Boom Over Hoist Prevent Device ○Swing & Travel Alarm ○3 Color Percentage Indicator ○
Drum LockFront Winch ○Rear Winch ○Boom Hoist Winch ○ Automatic
Swing Lock ○ Lock Pin for TransportGate Lock Lever ○Auto Stop Override Select Key Switch ○Auto Stop Override Switch ○
M E M OSCX700E
• We are constantly improving our products and therefore reserve the right to change designs and speafications without notice. • Units in this specification are shown under International System of Units; the figures in parenthesis are under Gravitational System of Units as old one.
9-3, Higashi-Ueno 6-chome, Taito-ku, Tokyo 110-0015, JapanPhone: 81-3-3845-1387 Facsimile: 81-3-3845-1394http://www.hsc-cranes.com