specification for approval...form no.:fp-10-017 reva/0 文本格式:gsa specification for approval...
TRANSCRIPT
-
深 圳 茂 硕 电 子 科 技 有 限 公 司
SHEN ZHEN MOSO ELECTRONICS TECHNOLOGY CO.,LTD
Form No.:FP-10-017 RevA/0
文本格式:GSA
Specification for Approval
Address: XiLi Songbai Road 1061, Nanshan District, Shenzhen City, Guangdong Province, P.R.China
Post Code: 518108
TEL: 0755-27657000 FAX: 0755-27657908
E-mail: [email protected] Web site: http://www.mosopower.com
Product Name: 150W Class II LED driver
Product Model:
LCP-150M214 LCP-150R214
LCP-150D214 LCP-150M214A12
LCP-150D214A12
Rev. B.2 Sample Date:
CUSTOMER AUTHORIZED SIGNATURE Tested By Checked By Approved By
(Company seal)Return one copy to MOSO with approved signature and company seal.
mailto:[email protected]://www.mosopower.com
-
深 圳 茂 硕 电 子 科 技 有 限 公 司
SHEN ZHEN MOSO ELECTRONICS TECHNOLOGY CO.,LTD
Form No.:FP-10-017 RevA/0
文本格式:GSA
Product Specification
Address: XiLi Songbai Road 1061, Nanshan District, Shenzhen City, Guangdong Province, P.R.China
Post Code: 518108
TEL: 0755-27657000 FAX: 0755-27657908
E-mail: [email protected] Web site: http://www.mosopower.com
Prepared By Checked By Approved By
Product Name: 150W Class II LED driver
Product Model:
LCP-150M214
LCP-150R214
LCP-150D214 LCP-150M214A12
LCP-150D214A12 Rev. B.2
Prepared By Checked By Approved By
mailto:[email protected]://www.mosopower.com
-
深 圳 茂 硕 电 子 科 技 有 限 公 司
SHEN ZHEN MOSO ELECTRONICS TECHNOLOGY CO.,LTD
Form No.:FP-10-017 RevA/0 I
ECN History
Rev. Description of Change
Changed Date Notes Before After
A.1 Original Release --- 2016-09-20
B.2 ECR单号:PECN201609092 2016-09-22 李永清
-
深 圳 茂 硕 电 子 科 技 有 限 公 司
SHEN ZHEN MOSO ELECTRONICS TECHNOLOGY CO.,LTD
Form No.:FP-10-017 RevA/0 II
Contents
1 Scope ............................................................................................................................................. 1 2 Input Characteristics .................................................................................................................... 1
2.1 Input Voltage and Frequency ............................................................................................ 1 2.2 AC Input Current ................................................................................................................. 1 2.3 Inrush Current ( Cold Start ) .............................................................................................. 1 2.4 Power Factor ....................................................................................................................... 1 2.5 Efficiency .............................................................................................................................. 1 2.6 THDi ...................................................................................................................................... 1
3 Output Characteristic ................................................................................................................... 1 3.1 Output Power....................................................................................................................... 1 3.2 Output Voltage and Current .............................................................................................. 1 3.3 Output Current Ripple ........................................................................................................ 2 3.4 Cold Start Turn-On Delay Time ........................................................................................ 2 3.5 Output Current Overshoot ................................................................................................. 3 3.6 Line Regulation (Input Voltage Regulation) .................................................................... 3 3.7 Load Regulation .................................................................................................................. 3
4 Dimming Control .......................................................................................................................... 3 4.1 Function ................................................................................................................................ 3 4.2 Dimming Interface............................................................................................................... 3 4.3 Dimming Curve ................................................................................................................... 4
5 Protect Function ........................................................................................................................... 5 5.1 Short Circuit Protect ........................................................................................................... 5 5.2 Over Temperature Protect ................................................................................................ 5
6 Derating Curve .............................................................................................................................. 5 7 Efficiency vs Load Curve ............................................................................................................... 6 8 Power Factor vs. Load Curve ........................................................................................................ 7 9 THD Curve ..................................................................................................................................... 7 10 Safety and Electromagnetic Compatibility .................................................................................. 7
10.1 Safety Standards .............................................................................................................. 7 10.2 Electromagnetic Compatibility Standards ..................................................................... 8
11 Details Of Safety Specifications ................................................................................................... 8 11.1 Dielectric Strength ............................................................................................................ 8 11.2 Grounding Resistance ..................................................................................................... 8 11.3 Leakage Current ............................................................................................................... 8 11.4 Insulation Resistance ....................................................................................................... 8 11.5 Surge Immunity Test ........................................................................................................ 8
12 Environmental Specifications ...................................................................................................... 9 12.1 Operated Temperature and Humidity ............................................................................ 9
-
深 圳 茂 硕 电 子 科 技 有 限 公 司
SHEN ZHEN MOSO ELECTRONICS TECHNOLOGY CO.,LTD
Form No.:FP-10-017 RevA/0 III
12.2 Storage Temperature and Humidity .............................................................................. 9 12.3 Degrees of Protection ...................................................................................................... 9
13 Reliability ...................................................................................................................................... 9 13.1 Mean Time Between Failure (MTBF) Qualification (According to MIL-HDBK-217F Standards) .................................................................................................................................. 9 13.2 Life Time Qualification ..................................................................................................... 9 13.3 Vibration ............................................................................................................................. 9 13.4 Drop Test ......................................................................................................................... 10
14 Mechanical Outline Drawing ..................................................................................................... 10 15 Label ............................................................................................................................................ 12 16 Weight ......................................................................................................................................... 14
-
深 圳 茂 硕 电 子 科 技 有 限 公 司
SHEN ZHEN MOSO ELECTRONICS TECHNOLOGY CO.,LTD
Form No.:FP-10-016 RevA/0 Page1of 14
1 Scope
This document defines the electrical, mechanical and environmental specifications of a 150W Class II LED driver. The LED driver shall meet the RoHS requirement.
This enclosure of LED driver is:
■ With AL Case □ With Plastic Case □ Open Frame □ Others
2 Input Characteristics
2.1 Input Voltage and Frequency
Item Minimum Rated Value Maximum
Input Voltage 176Vac 200-277Vac 305Vac
Input Frequency 47Hz 50/60 Hz 63Hz
2.2 AC Input Current
Under 25℃±10℃ ambient temperature, rated input and output range, maximum AC input current is 1.2A.
2.3 Inrush Current ( Cold Start )
Under 25℃±10℃ ambient temperature, 230Vac input, the peak value of the inrush current is less than 75A.
2.4 Power Factor
2.4.1 Under 25℃±10℃ ambient temperature, 230Vac input, 100% load, the typical value of power factor is 0.96, the minimum value is 0.95.
2.5 Efficiency
2.5.1 Under 25 ±10 ambient temperature, ℃ ℃ 230Vac input,136V output voltage, 100% load, the typical value of efficiency is 90%, the minimum value is 88%;
2.5.2 Under 25 ±10 ambient temperature, ℃ ℃ 230Vac input, 214V output voltage, 100% load, the typical value of efficiency is 93%, the minimum value is 91%.
2.6 THD
2.6.1 Under 25 ±10 ambient temper℃ ℃ ature, 230Vac input, 70~100% load, THD is less than 20% .
3 Output Characteristic
3.1 Output Power
Under full input voltage range, the maximum value of output power is 150 W.
3.2 Output Voltage and Current
-
深 圳 茂 硕 电 子 科 技 有 限 公 司
SHEN ZHEN MOSO ELECTRONICS TECHNOLOGY CO.,LTD
Form No.:FP-10-016 RevA/0 Page2of 14
Item ( Unit ) Value Test Condition ( Under 25 ±10 Ambie℃ ℃ nt Temperature ) Adjust Range of
Output Current ( A ) 0.11~1.10 full input voltage range
Adjust Range of Output Voltage( V ) 80~214 full input voltage range
Error of Output Current ±5%【1】 full input voltage range, full load range No Load
Output Voltage(V) ≤240V full input voltage range
Auxiliary Power Supply【2】 12V±5% /
0.2A /
Leave Factory Default Output
Spec
143V【3】 full input voltage range
1.05A【4】 full input voltage range
Note:
1. depended on maximum output current; 2. only for the LCP-150M214A12 and LCP-150D214A12; 3. leave factory default full load rating output voltage; 4. default output current can setting.
Output voltag e vs . Output c urrent c urve
0.70 , 214
1.10 , 80
1.10 , 136
0.11 , 214
0.21, 60
7085
100115130145160175190205220
0.00 0.11 0.22 0.33 0.44 0.55 0.66 0.77 0.88 0.99 1.10Output c urrent(A)
Out
put v
olta
ge(V
)
3.3 Output Current Ripple
Under 25 ±10 ambient temperature, ℃ ℃ 230Vac input, 100% load, the ratio of output current ripple【1】 peak-peak value and rated output current is less than 10%.
Note: load is LED, ripple is different with difference LED load.
3.4 Cold Start Turn-On Delay Time
Under 25 ±10 ambient temperature℃ ℃ , 230Vac input, 100% load, turn-on delay time at cold start is less than 2s; 176Vac input, less than3 s.
-
深 圳 茂 硕 电 子 科 技 有 限 公 司
SHEN ZHEN MOSO ELECTRONICS TECHNOLOGY CO.,LTD
Form No.:FP-10-016 RevA/0 Page3of 14
3.5 Output Current Overshoot
Under 25 ±10 ambient temperature,℃ ℃ 200-277Vac input, LED full load, the ratio of output current overshoot and rated output current is less than 10%.
3.6 Line Regulation (Input Voltage Regulation)
Under 25 ±10 ambient temperature℃ ℃ , 100% load, change input from 176Vac to 305Vac, the Line Regulation (Input Voltage Regulation) is less than 1%.
3.7 Load Regulation
Under 25 ±10 ambient temperature,℃ ℃ 230Vac input voltage, change load from 50% to 100%, Load Regulation is less than 3%.
4 Dimming Control
4.1 Function
Function 0-10V PWM Time Control DAL I Control
Yes Or No √ √ √ √
Note: 1. Normal leave factory product does not have time control function, MOSO will supply standard setting software for user to program when user need time control.
2. User can setting five time section. Customer can change the output current and the time depend on “MOSO programmer User Manual”.
4.2 Dimming Interface
Mode Electrical Interface
PWM Dimming
Frequency 250Hz~1000Hz
High Voltage Level 9.7~10.3V or 4.85~5.15V
Low Voltage Level 0~0.3V
Sink Current
-
深 圳 茂 硕 电 子 科 技 有 限 公 司
SHEN ZHEN MOSO ELECTRONICS TECHNOLOGY CO.,LTD
Form No.:FP-10-016 RevA/0 Page4of 14
4.3 Dimming Curve
DALI dimming curve
20
0
10
30
40
50
60
70
80
90
100
0 50 100 150 200
Power level
arc
pow
er(%
)
Linear dimming curve Logarithmic dimming curve
250
Note: Factory Default Output Logarithmic Curve
0-10V&PWM dimming curve
0-10V/P WM Dimming C urve
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0 1 2 3 4 5 6 7 8 9 10 11 12 0-10V
Typi
cal V
alue
of R
ated
Out
put C
urre
nt Io
/Ir
0-10V Dimming C urve P WM Dimming C urve
P W M 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 100% 100%
-
深 圳 茂 硕 电 子 科 技 有 限 公 司
SHEN ZHEN MOSO ELECTRONICS TECHNOLOGY CO.,LTD
Form No.:FP-10-016 RevA/0 Page5of 14
5 Protect Function
5.1 Short Circuit Protect
Constant current output when the output rail short, the power supply shall be self-recovery when the fault condition is removed.
5.2 Over Temperature Protect
When the temperature of power supply enclosure is over 85℃, the output of power supply shall decrease. Output current is limited in 30% ( typ. ) . meet the demand of double 85, at the maximum operation temperature 125 ℃, operate two hours and do not damage.
6 Derating Curve
100
80
60
40
20
0-40 -20 -5 10 25 50 60 70
Ambient Temperature(℃)
Load
(%)
Derating Curve
200-277Vac
-
深 圳 茂 硕 电 子 科 技 有 限 公 司
SHEN ZHEN MOSO ELECTRONICS TECHNOLOGY CO.,LTD
Form No.:FP-10-016 RevA/0 Page6of 14
7 Efficiency vs. Load Curve
Vin=230Vac Ta=25℃
E ffic ienc y vs . Output voltag e c urve
80
82
84
86
88
90
92
94
96
70 85 100 115 130 145 160 175 190 205 220Output voltag e(V)
Effi
cien
cy(%
)
1.10A0.88A0.70A
Vin=277Vac Ta=25℃
E ffic ienc y vs . Output voltag e c urve
80
82
84
86
88
90
92
94
96
70 85 100 115 130 145 160 175 190 205 220Output voltag e(V)
Eff
icie
ncy(
%)
1.10A0.88A0.70A
-
深 圳 茂 硕 电 子 科 技 有 限 公 司
SHEN ZHEN MOSO ELECTRONICS TECHNOLOGY CO.,LTD
Form No.:FP-10-016 RevA/0 Page7of 14
8 Power Factor vs. Load Curve
P ower fac tor vs . Output power c urve
0.80
0.82
0.84
0.86
0.88
0.90
0.92
0.94
0.96
0.98
1.00
75 90 105 120 135 150Output power(W)
PF
277VAC
230VAC
9 THD Curve
THD vs. Load curve
8%
9%
10%
11%
12%
13%
14%
70% 80% 90% 100%
230Vac 277Vac
THD
Load
10 Safety and Electromagnetic Compatibility
10.1 Safety Standards
Safety Certification Country and region Standards Whether have Certification
CCC China GB19510.1
GB19510.14
CE Europe EN61347-1
√ EN61347-2-13
-
深 圳 茂 硕 电 子 科 技 有 限 公 司
SHEN ZHEN MOSO ELECTRONICS TECHNOLOGY CO.,LTD
Form No.:FP-10-016 RevA/0 Page8of 14
CB CB member IEC61347-1
√ IEC61347-2-13
UL America
UL 8750
UL 1310(Class 2 Power Units)
UL 1012
cUL Canada
CSA C22.2 No.250.13-12 CSA C22.2 No.223-M91(Power Supplies
With Extra-Low-Voltage Class 2 Outputs)
AS/NZS 61347.1
10.2 Electromagnetic Compatibility Standards
EMC Certification Country and region Standards Whether have Certification
CCC China GB 17743
GB 17625.1
CE America Europe
EN 55015 CLASSB(input 230Vac)
√ IEC 61000-3-2
IEC 61000-3-3
IEC 61547
11 Details Of Safety Specifications
11.1 Dielectric Strength
11.1.1 input to output : 3750Vac, 60s, current is less than 10mA;
11.1.2 input to case : 3750Vac, 60s, current is less than 10mA;
11.1.3 output to case : 2000Vac, 60s, current is less than 10mA;
11.2 Grounding Resistance
Under 25℃±10℃ ambient temperature, pass 25A current for 60s, the measured grounding resistance is less than 0.1Ω.
11.3 Leakage Current
Leakage Current is defined as the current flowing through the ground wire. Under 25℃±10℃ ambient temperature and 277Vac/50Hz input, the leakage current shall be less than 0.7mA.
11.4 Insulation Resistance
Under 25℃±10℃ ambient temperature and less than 70% relative humidity, apply 500V dc voltage to each port of Input to output, input to case, output to case and last 60s, the insulation resistance at least 50MΩ.
11.5 Surge Immunity Test
Under 25 ±10 ambient temperature, l℃ ℃ ine to line is 5000V.
-
深 圳 茂 硕 电 子 科 技 有 限 公 司
SHEN ZHEN MOSO ELECTRONICS TECHNOLOGY CO.,LTD
Form No.:FP-10-016 RevA/0 Page9of 14
12 Environmental Specifications
12.1 Operated Temperature and Humidity
12.1.1 Temperature: -40℃ to +70℃(reference the Temperature vs. Load Curve);
12.1.2 Relative Humidity: 20% to 95%, non-condensing.
12.2 Storage Temperature and Humidity
12.2.1 Temperature: -40℃ to +85℃;
12.2.2 Relative Humidity: 10% to 95%, non-condensing.
12.3 Degrees of Protection
IP67
13 Reliability
13.1 Mean Time Between Failure (MTBF) Qualification (According to MIL-HDBK-217F Standards)
Mean time between failure is at least 200,000 hours under 25℃ ambient temperature, 230Vac input, and 80% load.
13.2 Life Time Qualification
The life time is at least 50, 000 hours, under 70℃ case temperature, 230Vac input, and 100% load.
L ife vs . T c c urve
0
50
100
150
200
250
300
30 40 50 60 70 80 90 100T c (°C )
Life(
KH
ours)
13.3 Vibration
10 to 500HZ Sweep at constant acceleration of 1.0G (depth: 3.5mm) for 1 Hour for each of the perpendicular axes X, Y, Z.
-
深 圳 茂 硕 电 子 科 技 有 限 公 司
SHEN ZHEN MOSO ELECTRONICS TECHNOLOGY CO.,LTD
Form No.:FP-10-016 RevA/0 Page10of 14
13.4 Drop Test
Ten times 60cm drop test with one angle three edges and six face of complete package, package shall not damage, product function and dielectric strength should meet the requirement.
14 Mechanical Outline Drawing
LCP-150M214
Dimming wire
Output wire
Infrared programming interface
Input wire
Black
RedWhite
Brown
Blue
Black
LCP-150R214
Output wire
Infrared programming interface
Input wire
Black
Red
Brown
Blue
-
深 圳 茂 硕 电 子 科 技 有 限 公 司
SHEN ZHEN MOSO ELECTRONICS TECHNOLOGY CO.,LTD
Form No.:FP-10-016 RevA/0 Page11of 14
LCP-150D214
Dimming wire
Output wire
Input wire Red
White
Brown
Blue
Black
LCP-150M214A12
OUTPUT
Dimming wire and out 12V wire
Output wireOutput wire
AC INPUT RedBlack
WhiteBlack
Red 12V+Transparent 12V-
Dimming wire
-
深 圳 茂 硕 电 子 科 技 有 限 公 司
SHEN ZHEN MOSO ELECTRONICS TECHNOLOGY CO.,LTD
Form No.:FP-10-016 RevA/0 Page12of 14
LCP-150D214A12
OUTPUT
Dimming wire and out 12V wire
Output wireOutput wire
AC INPUT RedBlack
WhiteBlack
Red 12V+Transparent 12V-
Dimming wire
15 Label
Wire Specification Note AC Input CCC+VDE 2x1.0mm2 L=600mm —
DC Output UL 2x18AWG L=450mm —
Dimming 22# 2C L=400mm for LCP-150M214or LCP-150D214 22# 4C L=400mm for LCP-150M214A12 or
LCP-150D214A12
-
深 圳 茂 硕 电 子 科 技 有 限 公 司
SHEN ZHEN MOSO ELECTRONICS TECHNOLOGY CO.,LTD
Form No.:FP-10-016 RevA/0 Page13of 14
-
深 圳 茂 硕 电 子 科 技 有 限 公 司
SHEN ZHEN MOSO ELECTRONICS TECHNOLOGY CO.,LTD
Form No.:FP-10-016 RevA/0 Page14of 14
16 Weight
950±50g