specification sheet umf series - howard lighting …¬cation sheet project: catalog#: approved by:...
TRANSCRIPT
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Specification Sheet
Project:
Catalog#:
Approved by:
Uti
lity
Fixt
ure
Specifications subject to change without notice.
UMF Series
5/1/2017
Roadway LightingUtility Medium FloodHPS / 400 watts
FEATURES
• Rugged die-cast aluminum housing with multiple mounting options— is thermally set polyester powder-coated for durability with 3 mils nominal paint thickness and corrosion resistant rated 500 hours salt spray endurance.
• IP66 Rating is standard.• Photocontrol receptacle is adjustable without tools.• Anodized aluminum provides uniform lighting distribution
available in IESNA Type 7x6 distribution pattern.• NEMA wattage label, terminal block and NEMA photocontrol
receptacle are standard.• All electrical components warranted by Howard Lighting Products’
5-year guarantee.• E39 mogul base socket standard.• Meets ANSI requirements for Flood Luminaires -• (ANSI C136.2, C136.3, C136.10, C136.15 and C136.32).• Available with lamp.• Available with glare and vandal shields.
Provides excellent roadway lighting for:• Commercial/Retail areas• Parking• Recreation areas• Industrial security• Building façade• Signage
APPLICATIONS
Standard Product IncludesASA70 Gray Powdercoat Paint w/ Tool-less Adjustable Photocontrol Receptaclew/ Heavy Duty Terminal Blockw/ Open Board IgnitorW/ Latch & 3-ft. 14-ga. SO cord
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Uti
lity
Fixt
ure
Specification Sheet
Project:
Catalog#:
Approved by:
Specifications subject to change without notice.
UMF Series5/1/2017
• are subject to change without notice.
Footnotes:1. Consult factory for option codes for combinations of accessories.2. Open style plug-in starter included as standard.3. P-control suitable for specified input voltage only.
Model Family Mounting Option Paint OptionsLamp
WattageLamp Type Ballast/Voltage Options1 Packaging
Reserved for Factory
Use
UMF1 W G 40 S CWM4 00 I 0000
UMF1: Shallow Door (400w max)
UMF3: Deep Door (400w max, true VBU)
UMF4: Deep Door (1000w max, true VBU)
W: Wrap-Around Yoke
M: Mini-Yoke
0: No Bracket
G: Grey Finish
B: Bronze Finish
40: 400w S: High Pressure Sodium CWM1: CWA Ballast - High PF - MultiTap (wired 120v)
CWM2: CWA Ballast - High PF - MultiTap (wired 208v)
CWM3: CWA Ballast - High PF - MultiTap (wired 240v)
CWM4: CWA Ballast - High PF - MultiTap (wired 277v)
00: No special options required
Starter/Ignitor Options2
N: None included
E: Encapsulated Plug-in starter
Photocontrol options
S: Shorting cap
P: Photoelectric control included3
L: Lamp - Special requirement
C: Special Power Cord (Std. equipped W/3ft cord)
F: Fuse options
V: Surge protection
D: Screw door closure
I: Single
X: Special
Reserved for
factory use.
Roadway LightingUtility Medium FloodHPS / 400 watts