specialist tools - technicalqr.com.au · specialist tools and accessories 4 the kompressor is...

SpecialistTools

1.5T Crimpers 5

3T Crimpers 5

5T Crimpers 5

12 to 15T Crimpers and Crimp Heads 6



Batteries and Accessories 12

Cutters and Cutting Heads 13

Electric and Hydraulic Pumps 19

Hydraulic Punch Tool and Accessories 20

Dies Copper 21

Dies Earthing Copper 25

Dies Indent Crimp 26

Dies Aluminium 26

Dies Aluminium Nest Crimp 28

Dies Cutting 28

Dies Insulink 29

Adaptors 29

Hydraulic Pole Saws 30

Hydraulic Impact Wrenches 32

Auger Bits and Adapters 33

Impact Sockets 38

Couplers 39

INDEX 40

Contents

SPECIALIST TOOLS AND ACCESSORIES

3

“Platinum Series” Battery Powered 13 Tonne Hydraulic Crimper

The MSS “Platinum Series” Battery Powered Hydraulic Crimper has been designed to quickly and easily crimp electrical connectors up to and including 400mm² CU. It has an industry exclusive automatic two speed pump design, delivering rapid advance, combined with unmatched high force crimping speed, up to 300% faster than other brands – Worldwide.

The sturdy steel trigger guard helps to protect the trigger from unintentional operation and field knocks.

Each tool is supplied with a 220V charger, 2x re-chargeable batteries and a heavy duty plastic carry case. The crimping dies are supplied separately.

• Industry exclusive mechanical “Visual Pop-Up Indicator“, driven directly from the relief valve – assuring a correct crimp each & every time. *Patent Pending.

• Audible “Click“ Indicator – assuring correct crimp pressure.

• Industry exclusive MSS design head & piston, completely removing all retract pinch points, for ultimate safety *Patent Pending.

• Pressure biased release valve for easy piston retraction.

• Partial piston retract, speeding crimp cycle time and saving battery life.

Part No. MSS-C130-42-18V

*Crimp speed comparison based on competitor published data at time of printing.

Exclusive OHS compliant.No retract pinch points.

355° head rotation.

Variable speed trigger for full piston control.Mechanical release trigger saves battery life.

Output Force

14.6 Short Ton

13 tonnes

Tool Weight 15.8 lbs

7.2 kg - complete with 5.0Ah battery

Jaw Opening 1.65 “ 42mm

Length 16.45 “ 425mm

Width 2.87 “ 73mm

Height 11.4 “ 290mm

OperatingVoltage

18 V-DC

Recharge Time 1 hour

Battery 18V x 5.0Ah LI-I0N

Technical Data

ProudlyAustralian

Rapid Highforce Crimping 300% Faster*

355º Head Rotation

Visual Crimp Indicator - Audible Click & Visual Indicator

Quick recharge 18 V x 5.0 Ah Li-ion batteries.

One hand operation.Ergonomically designed hand grip for unmatched comfort and safety.

PATENT No13573/2011

Superior quality.Pump block fully machined from premium grade aircraft alloy.


4

The Kompressor is designed to crimp up to 750 MCM/400mm2 Copper and Aluminium connectors directly from an aerial bucket hydraulic tool circuit, or portable hydraulic power unit.

Features• Exclusive Visual Crimp Indicator, ensuring a correct

crimp force of 12 tonnes / 24,000 lbs.• Double action hydraulic system preventing hang ups.• Accepts all recognised industry standard “U” style 12 tonne dies.

i.e. MSS, Burndy, Alcoa, Anderson, Thomas & Betts and Huskie. Die sets sold separately.

• Industry exclusive MSS designed head and piston completely removing all retract pinch points for ultimate safety. *Patent Pending

• Exclusive spring return back up in case of loss of hydraulic system pressure.

Part No. MSS-LPHC-750-C Standard unit with couplers CRIMP CYCLE: 2 Seconds**Subject to available hydraulic flow.

ProudlyAustralian

HOSES COUPLERS

Kompressor™

355º Head rotation.

2 stage safety trigger, eliminating accidental engagement of the piston.

Ergonomic – Lessen operator fatigue. Compact, lightweight and well balanced hydraulic crimp tool.

Visual Crimp Indicator

Technical Data

Jaw opening 42mm 1.65"Flow range 12 - 34lpm 3 - 9gpm

Input pressure 105-175bar 1500 - 2500 psi

Crimping force 10.9 tonnes 12 tonsWeight 9kg 20lbsLength 386mm 15.2”Width 140mm 5.5”Height 194mm 7.6”

Accessories available:

DIE SETS

Superior quality, machined from lightweight premium grade aircraft alloy for superior strength and reliability.

Exclusive - No retract pinch points.

PATENTPENDING

NEW


5

Part No. B15MDT • Light weight terminal crimper with a 1.5 tonne crimp capability• One hand operation with a head rotation of 340 degrees• Includes a moulded carry case with two batteries and a charger• Suitable for Copper terminals, lugs and splices up to 16 sq.mm• Requires suitable dies for pre or un-insulated bootlace ferrules

1.5T BATTERY CRIMPER 18VCEMBRE 1.5T CRIMPERS1.5T CRIMPERS

Unit: EA Qty: 1

Part No. B35-50MDT • Light weight terminal crimper with a 3.5 tonne crimp capability• One hand operation with a head rotation of 180 degrees• Includes a moulded carry case with two batteries and a charger• Suited for Australian dimension Copper or Aluminium lugs or links• Uses standard M type (5 ton) dies up to 95 sq.mm

3.5T BATTERY CRIMPER 18VCEMBRE CRIMPERS 3T3T CRIMPERS

Unit: EA Qty: 1

Part No. HT51 • Designed for the overhead linesman - this crimper is lightweight and can be operated with one hand• Small enough to be carried in a tool pouch• Only three pumping operations required to complete crimp

5 TONNE HYDRAULIC CRIMPERCEMBRE HYDRAULIC5T CRIMPERS

Unit: EA Qty: 1

Part No. B500T • 18V battery powered 5 ton, hydraulic crimping tool giving greater crimping speed and more operations• Improved handling balance with low noise & vibration• Dies available for Copper lugs from 6 to 120 sq.mm• LCD condition indication displays crimping pressure• Data storage logging of crimping operations

5T BATTERY POWERED CRIMPER LI-IONCEMBRE BATTERY CRIMPERS 5T

Unit: EA Qty: 1

Part No. PA-6B • Pneumatic crimping head for electrical terminals, designed for flexible product operations• Large range of dies and replacement head/jaws available• Operated by foot air valve• Unit should be bench mounted using the attachment base

PNEUMATIC TERMINAL & LUG CRIMPER 5 TONNECABAC PNEUMATIC CRIMPERS

Unit: EA Qty: 1


6

Part No. PA-6BHD • Heavy Duty Pneumatic Terminal and Lug Crimper for flexible product operations• Machine jaws and a large range of dies also available• Operated by foot valve• Unit should be bench mounted using attachment

PNEUMATIC CRIMPING HEAD Unit: EA Qty: 1

Part No. Y-PA6B JAWS • Spare part for PA-6B Pneumatic Terminal and Lug Crimper

PNEUMATIC CRIMPING MACHINE JAWS PA-6B Unit: EA Qty: 1

Part No. MSS-U130-18V • Designed to quickly and easily crimp electrical connectors up to and including 300mm2• The ‘U’ style offers easier access to joints in tight areas• Sturdy steel trigger guard• Up to 300 percent faster than other brands worldwide

PLATINUM SERIES BATTERY CRIMPER U HEADMSS BATTERY CRIMPERS12 TO 15T CRIMPERS AND CRIMP HEADS

Unit: EA Qty: 1

Part No. MSS-C130-42-18V • Designed to quickly and easily crimp electrical connectors up to and including 400mm2 CU• Industry exclusive automatic two speed pump design• Sturdy steel trigger guard• Up to 300 per cent faster than other brands worldwide• Comes with case, 2 x 5Ah lithium batteries & 240V charger

PLATINUM SERIES BATTERY CRIMPER 13T Unit: EA Qty: 1

Part No. B1350-CT • 18V battery powered hydraulic 13 ton crimping tool, allows for more crimps per charge at a quicker pace• Balanced, low noise & vibration for better operator comfort• LCD condition display monitors the crimp pressure• Data logging of crimping cycles• Copper dies available up to 400 sq.mm

13T BATTERY CRIMPER LI-IONCEMBRE BATTERY CRIMPERS 13T

Unit: EA Qty: 1


7

Part No. B1350L-CT • 18V battery powered hydraulic 13 ton crimping tool, allows for more crimps per charge at a quicker pace• Balanced, low noise & vibration for better operator comfort• LCD condition display monitors the crimp pressure• Data logging of crimping cycles• Copper dies available up to 400 sq.mm

13T BATTERY CRIMPER LI-ION-LONG HEAD Unit: EA Qty: 1

Part No. B1350-UCT • 18V battery powered hydraulic 13 ton crimping tool, allows for more crimps per charge at a quicker pace• Balanced, low noise & vibration for better operator comfort• LCD condition display monitors the crimp pressure• Data logging of crimping cycles• Copper dies available up to 400 sq.mm

13T BATTERY CRIMPER LI-ION U HEAD Unit: EA Qty: 1

Part No. B1300-CT • 18V battery powered hydraulic 13 ton crimping tool, allows for more crimps per charge at a quicker pace• Balanced, low noise & vibration for better operator comfort• LCD condition display monitors the crimp pressure• Data logging of crimping cycles• Copper dies available up to 400 sq.mm

13T BATTERY CRIMPER LI-ION Unit: EA Qty: 1

Part No. B1300L-CT • 18V battery powered hydraulic 13 ton crimping tool, allows for more crimps per charge at a quicker pace• Balanced, low noise & vibration for better operator comfort• LCD condition display monitors the crimp pressure• Data logging of crimping cycles• Copper dies available up to 400 sq.mm

13T BATTERY CRIMPER LI-ION-LONG HEAD Unit: EA Qty: 1

Part No. MSS-C130-42-M • 13 Tonne output and a wide 42mm jaw opening for up to and including 400mm2 Copper conductor• Rapid 2 speed advance and pressure crimp stage pumping• Flat sided ‘no return Pinch Point’ Die retaining ram• Lightest tool of its kind

13T HYDRAULIC CRIMPER C HEADMSP HYDRAULIC CRIMPERS 13T

Unit: EA Qty: 1


8

Part No. MSS-LPHC-750-C • Designed to crimp up to 750 MCM/400mm2 Copper and Aluminium connectors• Less than 2 second crimp cycle• Visual crimp indicator ensures correct crimp every time• Spring return feature in case of hydraulic pressure loss• Pinch point protection on die shoe return

KOMPRESSOR CRIMPER 12T(SH) 42MM JAW Unit: EA Qty: 1

Part No. MSS-C130-42RH • 130kN force at die faces• Accepts all standard shell style 12/13 tonne die sets• Up to 400mm2 copper• Remote pump operated-use with HPP1 hydraulic pump• Light-weight

CRIMPER - REMOTE - 13T X 42MM OPENINGMSP CRIMP HEADS 13T

Unit: EA Qty: 1

Part No. HT131-C • Quality manufacture and robust design will give years of trouble free service• 25mm throat opening• Two speed - saving time and effort during crimping• Head rotates 180 degrees for work in tight spaces

13 TONNE HYDRAULIC CRIMPER WITH C HEADCEMBRE HYDRAULIC CRIMPERS 13T

Unit: EA Qty: 1

Part No. HT131-C-WHO • Quality manufacture and robust design will give years of trouble free service• 25mm throat opening• Two speed - saving time and effort during crimping• Head rotates 180 degrees for work in tight spaces• Supplied with a set of Copper Dies (16-300mm2)

HT131-C WITH FULL SET OF DIES 16-300MM2 Unit: EA Qty: 1

Part No. HT131-UC • Easy access to tight cable joints, particularly in a trench• Shorter handles ensure easier handling• Large throat opening• Supplied in a heavy-duty plastic carry case

13 TONNE U HEAD HYD.CRIMPER Unit: EA Qty: 1


9

Part No. HT131-UC-WHO • Easy access to tight cable joints, particularly in a trench• Shorter handles ensure easier handling• Large throat opening• Supplied in a heavy-duty plastic carry case

HT131-UC WITH FULL SET OF DIES 16-300MM2 Unit: EA Qty: 1

Part No. HT131L-C-WHO • Quality manufacture and robust design will give years of trouble free service• Nominal force of 13.3 tonnes at the die faces• Head rotates 180 degrees for work in tight spaces• Flexible and easy handling

HT131L-C WITH FULL SET OF DIES 16-300MM2 Unit: EA Qty: 1

Part No. HT131LN-C • Quality manufacture and robust design will give years of trouble free service• Head rotates 180 degrees for work in tight spaces• Two speed - saving time and effort during crimping• Supplied in a heavy-duty plastic carry case

13 TONNE C LONG HEAD HYD CRIMPER Unit: EA Qty: 1

Part No. Y-HT131-CASE • Spare Case only• Cembre 13 tonne hand held Cembre Hydraulic tools HT131 series• Features compartments for dies and crimping tool• Colour: Cembre Blue

HT131-C STORAGE CASE HT131UC HT131L-CCEMBRE CRIMPER ACCESSORIES 13T

Unit: EA Qty: 1

Part No. AU130-C • Removable die holder for RHU131-C crimp head and HT131-UC crimp tool• Replacement part for holding Cembre 13 ton C type dies• Fits tool head and locked with pin

C DIE ADAPTOR FOR RHU/UC Unit: EA Qty: 1


10

Part No. RHC131 • Remote head 13 tonne crimper to be used with a CABAC remote pump or any pump developing 700 bar (10,000 psi) pressure• Use with standard CABAC 12 tonne dies• Standard ‘C’ throat and wide throat available• Not supplied with a case

13 TONNE REMOTE HEAD C TYPE 25MM THROATCEMBRE CRIMP HEADS 13T

Unit: EA Qty: 1

Part No. RHU131-C • Remote head 13 tonne crimper to be used with a CABAC remote pump or any pump developing 700 bar (10,000 psi) pressure• Steel case for head and dies available (Part No. Y-RHC131 CASE)• Throat opening: 34mm• Weight: 3.7kg

13 TONNE REMOTE HEAD U TYPE Unit: EA Qty: 1

Part No. RHC131L-N • Remote head 13 tonne crimper to be used with a CABAC remote pump or any pump developing 700 bar (10,000 psi) pressure• Use with standard CABAC 12 tonne dies• Standard ‘C’ throat and wide throat available• Not supplied with a case

13 TONNE REMOTE LONG HEAD C TYPE 42MM Unit: EA Qty: 1

Part No. CYO-510B • Economically priced 12 tonne tool with a two stage pumping action for reduced crimping time• 180 degree head rotation for work in tight spaces• Reinforced glass fibre handles• Supplied in a heavy-duty plastic carry case

ECONOMY 12T HYDRAULIC CRIMPER C HEADCABAC 12T CRIMPERS

Unit: EA Qty: 1

Part No. ECW-H3D • 23 tonnes of force at the die face with the ability to crimp up to 630mm2 Copper and 500mm2 Aluminium• Light-weight - easily handled by one person• Couple with a CABAC hydraulic pump (700 bar)• Steel storage case supplied separately

23 TONNE CRIMPER - REMOTE HEADCEMBRE CRIMP HEADS 23T23 TO 25T CRIMPERS AND CRIMP HEADS

Unit: EA Qty: 1


11

Part No. Y-ECW-3D CASE • For use with the 23 tonne Hydraulic Crimper (Part No. ECW-H3D)• Die holder tray is also available

ECW-H3D STEEL STORAGE CASE Unit: EA Qty: 1

Part No. Y-ECW-3D D/HOLD • For use with the 23 tonne Hydraulic Crimper (Part No. ECW-H3D)• Steel storage case is also available

ECW-3D DIE HOLDER TRAY ONLY Unit: EA Qty: 1

Part No. MSS-RH23 • 23 Tonne compression output for up to and including 630mm2 Copper conductors• Smallest and Lightest tool of its kind available• Use with a HPP1 hydraulic pump

23 TONNE CRIMP HEADMSS CRIMP HEADS 23T

Unit: EA Qty: 1

Part No. RHU520 • Remote head 52 tonne crimper can be used with one of our hydraulic pumps or any pump developing 700 bar (10,000 psi) pressure• Crimps Cu and Al lugs and compression fittings up to 1200mm2• Throat opening: 75mm• Weight: 18kg

HYD PRESSHEAD WITH FEMALE COUPLERCEMBRE 52T CRIMP HEADS52 TO 60T CRIMPERS AND CRIMP HEADS

Unit: EA Qty: 1

Part No. RHU600 • Remote head 60 tonne can be used with hydraulic pumps developing 700bar (10,000psi)• Manufactured in thermally treated steel• Resistant to oxidation from external agents, abrasion and wear• Equipped with a quick fit hydraulic male coupler• Precision made for greater safety and reliability

HYDRAULIC CRIMPING HEAD 600KNCEMBRE 60T CRIMPING HEAD

Unit: EA Qty: 1


12

Part No. CP1120-W-1000-KV • Cutter head and pump system to safely cut LV and MV cable in a network if the cable has not been spiked• The cutter head is insulated from the pump• System must be rebuilt if a ‘live’ cable is cut• Earth connection available to ground/earth the head and the pump• Supplied in a metal case

HYDRAULIC CUTTING UNIT Unit: EA Qty: 1

Part No. MSS-RH60 • Designed as a portable crimping head for installing compression sleeves and terminals• Used for transmission construction and maintenance work• Single acting 60 tonne crimp head• Shell die sets sold separately• Use with HPP2 hydraulic pump

60 TON CRIMP HEADMSS 60T CRIMP HEADS

Unit: EA Qty: 1

Part No. Y-ESC600 • Vehicle battery cord for the 13 tonne battery powered hydraulic crimper• (Part No. B131-C and B131LN-C)• Length: 6M

B131-C VEHICLE BATTERY CORD 6M WITH PLUGBATTERIES AND ACCESSORIESBATTERIES AND ACCESSORIES

Unit: EA Qty: 1

Part No. B131-C CARCHARGER • 12V cigarette lighter charger cord for the 13 tonne battery powered hydraulic crimper• (Part No. B131-C and B131LN-C)

BATTERY CRIMPER 13T CAR CHARGER B131-C Unit: EA Qty: 1

Part No. DC1414 • 240V charger for the 13 tonne battery powered hydraulic crimper• (Part No. B131-C and B131LN-C)

CHARGER TO SUIT CB1430H BATTERY Unit: EA Qty: 1


13

Part No. CB1430H • Compatible with select range of Cembre crimpers• Battery material: Ni-MH• Battery voltage: 14.4V• Battery current: 3 Ah

NI-MH 14.4V 3.0AH RECHARGEABLE BATTERY Unit: EA Qty: 1

Part No. CB1840L • Electronic control of single cells to avoid overcharging and undercharging• Air-cooled charging technology to increase battery life• Auto-off to optimise energy consumption• Battery charger also available (Part No. ASC30-36)

LI-ION 18V 4.0AH RECHARGEABLE BATTERY Unit: EA Qty: 1

Part No. ASC30-36 • Battery charger for use with the Li-Ion 18V 4.0 Ah Rechargeable Battery (Part No. CB1840L)

CHARGER TO SUIT CB1840L BATTERY Unit: EA Qty: 1

Part No. TC04 • Remote hydraulic cutter head specifically designed to cut ACSR, Copper conductors/cables and steel ropes, Copper, Aluminium and steel rods• Double stage hydraulic system saves time for the operator• Fits any pump with Quick Connect hydraulic fittings• Supplied in a steel case

REMOTE HYD.ST.WIRE ASCR 40MM ODCEMBRE CUTTERSCUTTERS AND CUTTING HEADS

Unit: EA Qty: 1

Part No. TC055 • Equipped with a quick automatic coupling for connection to Cembre hydraulic pumps with a working pressure of 700bar• Designed to cut cables, steel rope, rods, armoured cable• Supplied in a metal case• See data sheet for cutting specifications

HYD CUT TOOL HEAD CU/AL 55MMACSR50MM MAX Unit: EA Qty: 1


14

Part No. TC085 • Remote hydraulic cable cutter head specifically designed to cut annealed Copper and Aluminium conductors and telephone cables• Supplied with a steel case• Not suitable to cut steel and armoured cable• Maximum cutting diameter: 85mm

PUMP OPERATED CUTTER HEAD MAX DIA 85MM Unit: EA Qty: 1

Part No. TC096 • Remote hydraulic cable cutter head specifically designed to cut annealed Copper and Aluminium conductors and telephone cables• Supplied with a steel case• Not suitable for armoured cable• Maximum cutting diameter: 95mm


Part No. TC120 • Remote hydraulic cable cutter head specifically designed to cut annealed Copper and Aluminium conductors and telephone cables• Supplied with a steel case• Automatic safety valve to prevent over-pressure• Complete with 3/8 inch NPT self-lock male coupler• Not suitable to cut steel and armoured cable


Part No. HT-TC026 • Hand operated hydraulic tool specifically designed to cut ACSR, Copper conductors/cables and steel ropes, Copper, Aluminium and steel rods• Dual speed pump• Head can rotate 90 degrees• Supplied with a canvas bag• Maximum cutting diameter: 24mm

HYD. CUTTING TOOL ACSR/STEEL 24MM MAX OD Unit: EA Qty: 1

Part No. HT-TC055 • Hand operated hydraulic cable cutter specifically designed to cut steel and wire rope• Produces up to 140kN force at the max pressure of 808 bar• Suitable for Copper, Aluminium, armoured cable, steel rope & rods• See data sheets for cutting specifications• Maximum cutting diameter: 55mm

HYD. CUTTING TOOL CU/AL 55MM MAX OD Unit: EA Qty: 1


15

Part No. HT-TC065 • Hand operated hydraulic cable cutter specifically designed to cut Copper, Aluminium and telecommunications cables• Supplied in a canvas bag• Not suitable to cut steel and armoured cable• Maximum cutting diameter: 65mm

HYD. CUTTING TOOL AL/CU 65MM MAX OD Unit: EA Qty: 1

Part No. HT-TC0851 • Hand operated hydraulic cable cutter specifically designed to cut annealed Copper and Aluminium conductors and telephone cables• Double stage hydraulic system saves time for the operator• Head can rotate 180 degrees• Supplied with a canvas bag• Maximum cutting diameter: 85mm

HYD. CUTTING TOOL CU/AL 85MM MAX OD Unit: EA Qty: 1

Part No. BTC250T • Battery powered cutter suitable for ACSR, steel rope, stay wire, steel rods and armoured cable• 18V battery produces faster and more cutting operations• Head pivots up to 180 degrees - ease of use in confined spaces• Low noise and minimal vibration aid operator comfort• Lightweight and balanced for single handed operation

18V BATTERY CUTTER 25MM Unit: EA Qty: 1

Part No. BTC500T • Battery powered 18V cable cutter for Copper, Aluminium and telecom cables and conductors• Blades: High strength, heat treated special steel• Head pivots up to 90 degrees - ease of use in confined spaces• Low noise and minimal vibration aid operator comfort• Lightweight and balanced for single handed operation


Part No. BTC550T • 18V battery powered for faster cutting operations. Lightweight and balanced for single handed operation• Cutting blades: High strength, heat treated special steel• Head pivots up to 320 degrees - ease of use in confined spaces• Low noise and minimal vibration aid operator comfort• Cutter suitable for armoured cable, steel rope and rods



16

Part No. BTC650T • 18V battery powered for faster cutting operations for Aluminium, Copper and telecom cables• Cutting blades: High strength, heat treated special steel• Head pivots up to 335 degrees - ease of use in confined spaces• Low noise and minimal vibration aid operator comfort• Lightweight and balanced for single handed operation


Part No. BTC950T • 18V battery powered for faster cutting operations for Aluminium, Copper and telecom cables• Cutting blades: High strength, heat treated special steel• Head pivots up to 335 degrees - ease of use in confined spaces• Low noise and minimal vibration aid operator comfort• Lightweight and balanced for single handed operation


Part No. CPC-30A • Economically priced - designed to cut cable with a shearing scissor action• Self contained hydraulic hand pump develops 6.7 tonnes• Head swivels for access into tight situations• Hardened steel blades specifically to cut ACSR

HYDRAULIC CUTTER - ECONOMY MAX 240MM2CABAC CUTTERS

Unit: EA Qty: 1

Part No. DDQ33 • Easy to use - designed to attach to a hand held electrical drill• Various cutting sizes available from 30-100mm diameter cable• Supplied in an easy to carry case• Blade can be sharpened using a file or mini grinder

CUTTER HEAD DIA. 22 MM STEEL ROPE Unit: EA Qty: 1


CUTTER HEAD DIA. 30 MM ACSR CHAIN Unit: EA Qty: 1


17


CUTTER HEAD DIA. 80 MM AL/CU CABLE Unit: EA Qty: 1

Part No. MSS-S25-RH • Remote tool head for cutting Copper, Aluminium, ACSR and steel wire rope up to 25mm O.D.• For use with 700bar/10,000psi hydraulic power pumps

HYD STEEL & WIRE ROPE CUTTER - MAX25MMMSP CUTTERS

Unit: EA Qty: 1

Part No. MSS-S40-RH • Suitable for Copper, Aluminium and ACSR cable• Cuts up to 40mm O.D. cables• For use with 700bar/10,000psi hydraulic power pumps

HYD STEEL & WIRE ROPE CUTTER - MAX40MM Unit: EA Qty: 1

Part No. MSS-S60-RH • Suitable for Copper, Aluminium and ACSR cable• Cuts up to 60mm O.D. cables• Other sizes available

CUTTER - REMOTE HYDRAULIC - 60MM MAX Unit: EA Qty: 1


CUTTER REMOTE HEAD 100MM STEEL Unit: EA Qty: 1


18


CUTTER REMOTE HEAD - 120MM STEEL Unit: EA Qty: 1

Part No. MSS-S40-M • Smallest and most powerful cutter weight to power ratio available on the market today• 2 speed hydraulic pumping for rapid advance and cutting

HYD. STEEL AND WIRE ROPE CUTTER 40MM MAX Unit: EA Qty: 1

Part No. MSS-S40-18V • Guillotine style for cutting Copper, Aluminium, ACSR and Steel Wire Rope up to 40mm O.D.• Rapid blade advance - double speed in cutting stage• Rotating head 180 degrees• Factory pre-set overload relief to protect tool

BATTERY POWERED CABLE CUTTER 40MM MAX Unit: EA Qty: 1

Part No. MSS-KREC-54AC • Designed to cut the toughest Copper and Aluminium cables in a limited amount of space• Repetitive ratcheting movement is completely eliminated• Built in circuit breaker for overloading protection• Comfortably fits into a gloved hand

GEAR DRIVEN CUTTER 14.4V INC 2 BATTERY Unit: EA Qty: 1

Part No. MSS-U130-RH • 13 Tonne crimping for up to 300mm2 CU• U style head for those tight spaces• Accepts standard 12/13T die sets (with Die adaptor supplied)• For use with 700bar/10,000psi hydraulic power pumps

13 T HYDRAULIC CRIMPER - REMOTE U H Unit: EA Qty: 1


19

Part No. PO7000 • Double stage foot pump for faster crimping and cutting• Hands are free for cable and lug positioning• Maximum stability with an extra large base• Supplied in a robust steel case

HYD. FOOT PUMP 2 STAGE IN CASEPUMPSELECTRIC AND HYDRAULIC PUMPS

Unit: EA Qty: 1

Part No. B70M-P24 • A state of the art unit designed for mobile crimping and cutting - use with any of the CABAC crimping heads and cutters• Light-weight and balanced - easy to carry• Powerful 24V battery with a 60 minute recharge• Manual pressure relief valve

BATTERY POWERED HYDRAULIC PUMP Unit: EA Qty: 1

Part No. MSS-HCP-45SV • Suitable for use with all hydraulic remote crimping heads up to 60 tonne capacity• Light-weight, portable and small in size with high power• Audible ‘POP’ signals completion of the crimp cycle• Comes with remote control pendant• Double Acting pump available-p/n MSS-HCP-45SV-DA

CRIMPING PUMP -0.45KW-240V- 12V REMOTE Unit: EA Qty: 1

Part No. KSMP-3AR • Usable oil: 1.8 litres• First stage pressure: 15 bar at 2.0 l/min• Second stage pressure: 700 bar at 0.2 l/min• Power: 240V, 1.6A

ELECTRIC HYDRAULIC PUMP-240V Unit: EA Qty: 1

Part No. HPP1 • This pump is called the ‘Peanut Pump’ for good reason. Small and light-weight, this pump produces a full 700bar (10,000 psi) pressure• Sufficient oil volume to power all CABAC crimp heads & cutters• Operate at any angle - no leaks if tipped over• Motor and pump are totally enclosed and drip proof• Comes with a 3m hose and coupler to suit Cabac and MSP Hyd tools

SUPER LIGHTWEIGHT 240V ELECTRIC PUMP Unit: EA Qty: 1


20

Part No. HPP2 • Two stage pumping with 2.5L/min flow in low pressure stage and 0.35L/min in the high pressure stage• For CABAC and MSS remote crimp heads (up to 60 Tons) and cutters• Power Supply Voltage: 240V/50Hz• Weight: 18kg• Comes with a 3m hose and coupler to suit Cabac and MSP Hyd tools

HYDRAULIC PUMP/HOSE 240V LIGHTWEIGHT Unit: EA Qty: 1

Part No. SKP-15 • A complete die punch set including a pump and various dies for mild steel < 3.2mm• Output of 15 tonnes and a ram stroke of 25mm• Round dies: dia. 22, 27.6, 34.1, 42.7, 48.7 & 60.5mm• Square die: 32x32mm• Additional dies & spindles also available separately

15 TONNE HYDRAULIC PUNCH DIE SETCABAC 15THYDRAULIC PUNCH TOOL AND ACCESSORIES

Unit: EA Qty: 1

Part No. PDS32 • Die for SP-15 hydraulic punch tool set• Suitable for mild steel up 3.2mm thick• Die is not suitable for stainless steel• Round and square dies available for SKP-15

PUNCH DIE SQUARE 32 X 32MM W/SPINDLE Unit: EA Qty: 1

Part No. PDSPINDLE • Spare part for the SKP-15 15 Tonne Hydraulic Punch• A compact, light and fast punching tool• Full kit also available

PUNCH DIE SET SPINDLE Unit: EA Qty: 1

Part No. PDSPACER • Spare part for the SKP-15 15 Tonne Hydraulic Punch• A compact, light and fast punching tool• Full kit also available

PUNCH DIE SET SPACER Unit: EA Qty: 1


21

• Die for SP-15 hydraulic punch tool set• Suitable for mild steel up 3.2mm thick• Die not suitable for stainless steel• Round and square dies available for SKP-15

Part No. Description Unit Qty

PD16.2 PUNCH DIE ROUND 16.2MM EA 1PD20.4 PUNCH DIE ROUND 20.4MM EA 1PD22.5 PUNCH DIE ROUND 22.5MM EA 1PD25.4 PUNCH DIE ROUND 25.4MM EA 1PD32.5 PUNCH DIE ROUND 32.5MM EA 1PD40.5 PUNCH DIE ROUND 40.5MM EA 1PD50.8 PUNCH DIE ROUND 50.8MM EA 1PD60.5 PUNCH DIE ROUND 60.5MM EA 1PD63.5 PUNCH DIE ROUND 63.5MM EA 1PD88.9 PUNCH DIE ROUND 88.9MM EA 1PD115.5 PUNCH DIE ROUND 115.5MM EA 1

• 60 ton crimp head hex die for copper crimp lugs and links• For large crimp lugs and links up 1200 sq. mm available• Offers wide crimp on barrel

MSP 60T


MSS-RH60-23.1AFCU HEX DIE SET - 60T -23.1MM AF - CU EA 1MSS-RH60-26.0AFCU HEX DIE SET - 60T - 26.0MM AF - CU EA 1MSS-RH60-28.1AFCU HEX DIE SET - 60T - 28.1MM AF - CU EA 1MSS-RH60-31.0AFCU HEX DIE SET - 60T - 31.0MM AF - CU EA 1MSS-RH60-37.0AFCU HEX DIE SET - 60T - 37.0MM AF - CU EA 1

DIES COPPER


22

• Die for 5 ton crimping tool for Australian and New Zealand dimensioned Copper lugs and links• Hexagonal crimp dies• Made from heat-treated carbon steel

CABAC 5T COPPER DIES


M44-50 HT50 HEX.COPPER DIE 6MM2 EA 1M57-50 HT50 HEX.COPPER DIE 10MM2 EA 1M63-50 HT51 HEX.COPPER DIE 16MM2 EA 1M77-50 HT51 HEX.COPPER DIE 25MM2 EA 1M82-50 HT51 HEX.COPPER DIE 6MM2 EA 1M92-50 HT51 HEX.COPPER DIE 35MM2 EA 1M96-50 HT51 HEX.COPPER DIE 25MM2 EA 1M104-50 HT50 HEX.COPPER DIE 50MM2 EA 1M115-50 HT51 HEX.COPPER DIE 70MM2 EA 1M142-50 HT51 HEX.COPPER DIE 95MM2 EA 1M148-50 HT51 HEX.COPPER DIE 70MM2 EA 1M165-50 HT50 HEX.COPPER DIE 120MM2 EA 1M183-50 HT51 HEX.COPPER DIE 150MM2 EA 1M190-50 HT51 HEX.COPPER DIE 95MM2 EA 1M200-50 HT50 HEX.COPPER DIE 185MM2 EA 1

• Custom die for B035 3.5 ton crimping tool• Hexagonal die for Copper lugs and links• Range suitable from 6 sq.mm to 120 sq.mm• Die fits Klauke EK354-L crimp tool

CABAC B035 3T


B035-6 DIE B035 CU 6MM EA 1B035-10 DIE B035 CU 10MM EA 1B035-16 DIE B035 CU 16MM EA 1B035-25 DIE B035 CU 25MM EA 1B035-35 DIE B035 CU 35MM EA 1B035-50 DIE B035 CU 50MM EA 1B035-70 DIE B035 CU 70MM EA 1B035-95 DIE B035 CU 95MM EA 1B035-120 DIE B035 CU 120MM EA 1

Part No. HT-22.3CU • Die A/F: 22.3mm

COPPER HEXAGONAL DIE 22.3 A/FCABAC 12T/ 13T COPPER DIES

Unit: EA Qty: 1


23

Part No. MSS-C130-281CU • Conductor: 400mm2• AF Hex Die: 28.1mm

HEX DIE SET- 13T- 28.1MM A/F -400MM2-CU Unit: EA Qty: 1

• Crimping dies for Australian and New Zealand dimensioned lugs and links• Hexagonal dies for Copper lugs and links• For 12/13 ton hydraulic crimp tools• Carbon steel dies

CABAC 12T/ 13T COPPER DIES


HT130-C-6 COPPER HEXAGONAL DIE 6MM2 EA 1HT130-C-10 COPPER HEXAGONAL DIE 10MM2 EA 1HT130-C-16 COPPER HEXAGONAL DIE 16MM2 EA 1HT130-C-25 COPPER HEXAGONAL DIE 25MM2 EA 1HT130-C-35 COPPER HEXAGONAL DIE 35MM2 EA 1HT130-C-50 COPPER HEXAGONAL DIE 50MM2 EA 1HT130-C-70 COPPER HEXAGONAL DIE 70MM2 EA 1HT130-C-95 COPPER HEXAGONAL DIE 95MM2 EA 1HT130-C-120 COPPER HEXAGONAL DIE 120MM2 EA 1HT130-C-150 COPPER HEXAGONAL DIE 150MM2 EA 1HT130-C-185 COPPER HEXAGONAL DIE 185MM2 EA 1HT130-C-240 COPPER HEXAGONAL DIE 240MM2 EA 1HT130-C-300 COPPER HEXAGONAL DIE 300MM2 EA 1

• Dies 12/13 ton crimp heads for heavy duty C-connectors CACD & CACE range• Oval crimp on C-connector• Made from heat-treated carbon steel

CABAC C CONNECTOR 12T COPPER DIES


HT130-CC C CONNECTOR CRIMPING DIES 10-35 MM2 EA 1HT130-C0 C CONNECTOR CRIMPING DIES 35-70 MM2 EA 1HT130-C997 C CONNECTOR CRIMPING DIES 95-120 MM2 EA 1HT130-C1011 C CONNECTOR CRIMPING DIES 150-240 MM2 EA 1


24

Part No. DIESET • 12/13 ton dies for Australian and New Zealand dimensioned Lugs and Links• Hexagonal crimp die kit for Cu• Made from heat-treated carbon steel• Copper dies 16sq.mm to 300 sq.mm

12 TON DIE SET 16-300MM2CABAC DIESETS 12T/ 13T COPPER

Unit: EA Qty: 1

Part No. DIESET2 • 12/13 ton dies for Australian and New Zealand dimensioned lugs, links and overhead line sleeves• Hexagonal crimp die kit for Cu & Al• Made from heat-treated carbon steel• Cu dies 16 to 300 sq.mm & Al dies 6 to 300 sq.mm

13 TON DIE SET Unit: KIT Qty: 1

• Die for Copper CABAC full tension sleeves for overhead Copper conductors• Hexagonal crimp die• Made from heat-treated carbon steel

CABAC O/H COMPRESSION 12T COPPER


HT-16PT CU HEX DIE 8.2 A/F 9MM WIDTH EA 1HT-25PT CU HEX DIE 9.2 A/F 9MM WIDTH EA 1HT-35PT CU HEX DIE 11.5 A/F 9MM WIDTH EA 1HT-50PT CU HEX DIE 13.2 A/F 9MM WIDTH EA 1HT-70PT CU HEX DIE 14.8 A/F 9MM WIDTH EA 1HT-95PT CU.HEX.DIE 19.0 A/F 9MM WIDTH EA 1

• Crimping dies for Australian and New Zealand dimensioned lugs and links• Hexagonal crimp dies for Copper lugs and links• Suitable for 22/23 ton hydraulic crimping heads



ECW-H3D-400 DIE - ECW-H3D 400MM2 COPPER EA 1ECW-H3D-500 DIE - ECW-H3D 500MM2 COPPER EA 1ECW-H3D-630 DIE - ECW-H3D 630MM2 COPPER EA 1


25

• Die for 52 ton crimp heads for Australian and New Zealand dimensioned Copper lugs and links• Hexagonal crimp die• Die range for large Copper lugs and links up 1000 sq.mm• Adaptor RHU520-AD available for 13 ton C dies



RHU520-400 HEX. DIE 400MM A/F 28.1 EA 1RHU520-500 HEX. DIE 500MM A/F 31.0 EA 1RHU520-630 HEX. DIE 630MM A/F 37.0 EA 1RHU520-800 HEX. DIE 800MM A/F 43.2 EA 1RHU520-1000 HEX. DIE 1000MM A/F 48.0 EA 1

Part No. HT-CACC • Crimping die C type for 12/13 ton crimper for CACC70 C-connector• Based on old style range• Made from heat treated carbon steel• Also see MC70-C and other dies for CACC range

COPPER C CONNECTOR CACC DIECABAC C CONNECTOR 12T DIESDIES EARTHING COPPER

Unit: EA Qty: 1

Part No. HT-CAEC • Die to suit earthing rod C-connectors range CAEC• Die fits all sizes of CAEC C-connector range• Made from heat-treated carbon steel• Can crimp C-connector CACC95

COMPRESSION DIE FOR CAEC Unit: EA Qty: 1

• Die for CACC range of earth bonding and tap off C-connectors• 12/13 ton crimp tool C-type hexagonal crimp die• Made from heat-treated carbon steel

CABAC HT CACC C-CONNECTOR 12 T DIES


MC25-C DIE CACC25 HT&B SERIES TOOLS EA 1MC35-C DIE CACC35 HT&B SERIES TOOLS EA 1MC70-C DIE CACC70 HT&B SERIES TOOLS EA 1MC95-C DIE CACC95 HT&B SERIES TOOLS EA 1MC185-C DIE CACC120 HT&B SERIES TOOLS EA 1


26

• Indent die for 12/13 ton Aluminium solid sector conductor• Suitable for Australian and New Zealand sector lugs and links• Requires a NEST die for sector crimps

CABAC 12T DIES


HT130-A16INDENT INDENT SECT. ALUM 3/4 CORE 120MM EA 1HT130-A18INDENT INDENT SECT. ALUM 3/4 CORE 185MM EA 1HT130-A19INDENT INDENT SECT. ALUM 3/4 CORE 240MM EA 1

DIES INDENT CRIMP

• Die for 5 ton crimp tools for Australian & New Zealand dimensioned Aluminium lugs and links• Hexagonal crimp dies• Made from heat-treated carbon steel

CABAC 5T ALUMINIUM DIES


M90-50 HT51 HEX ALUM DIE 16-35MM A/F 9.0MM EA 1M132-50 HT51 HEX ALUM DIE 50-70MM A/F 13.2MM EA 1M140-50 HT51 HEX ALUM DIE ABC 25MM A/F 14.0MM EA 1M173-50 HT51 HEX ALUM DIE ABC 35-70MM A/F 17.3MM EA 1M215-50 HT51 HEX ALUM DIE ABC 95-150MM AF 21.5MM EA 1M220-50 HT50 HEX ALUM DIE 150-185MM A/F 22.0MM EA 1

DIES ALUMINIUM

• Die to suit Australian and New Zealand dimensions Aluminium lugs, links and overhead line sleeves• C-type die for 12/13 ton crimp tools• Hexagonal crimp dies• Made from heat-treated carbon steel

CABAC 12T/ 13T ALUMINIUM DIES


HT-6/35AL ALUMINIUM HEX.DIE 9.00MM A/F 6-32MM EA 1HT-7/225AL ALUMINIUM HEX.DIE 14.0MM A/F EA 1HT-7/250AL ALUMINIUM HEX.DIE 14.5MM A/F EA 1HT-7/300-375AL ALUMINIUM HEX.DIE 18.0MM A/F EA 1HT-7/450AL ALUMINIUM HEX.DIE 19.0MM A/F EA 1HT-19/375AL ALUMINIUM HEX.DIE 26.2MM A/F EA 1HT-50/70AL ALUMINIUM HEX.DIE 13.2MM A/F 50-70MM EA 1HT-95/120AL ALUMINIUM HEX.DIE 17.3MM A/F 95-120MM EA 1HT-150/185AL ALUMINIUM HEX.DIE 22.0MM A/F 150-185MM EA 1HT-240/300AL ALUMINIUM HEX.DIE 28.4MM A/F 240-300MM EA 1


27

• 12/13 ton C-type die for ABC lugs and links• Hexagonal crimp dies• Made from heat-treated carbon steel

CABAC ABC 12T ALUMINIUM DIES


HT-25ABC ALUMINIUM DIE 25MM2 ABC EA 1HT-35/95ABC ALUMINIUM DIE 35/95MM2 ABC EA 1HT-95/150ABC ALUMINIUM DIE 95/150MM2ABC EA 1

Part No. DIESET3 • 12/13 ton dies for Australian and New Zealand dimensioned Lugs and Links• Hexagonal crimp die kit for Al• Made from heat-treated carbon steel• Aluminium dies for 6 sq.mm to 300 sq.mm

ALUMINIUM DIE SETCABAC DIESETS 12T/ 13T ALUMINIUM

Unit: KIT Qty: 1

Part No. ECW-H3D4/500AL • Crimping dies for Australian and New Zealand dimensioned lugs and links• Hexagonal crimp dies for Aluminium lugs and links• Suitable for 22/23 ton hydraulic crimping heads

DIE ALUM. ECW-H3D 400/500CABAC 23T ALUMINIUM DIES

Unit: EA Qty: 1

• Die for 52 ton crimp head for Australian and New Zealand dimensioned Aluminium lugs and links• Hexagonal crimp die• Made from heat treated carbon steel

CABAC 53T ALUMINIUM DIES


RHU520-4/500AL HEX. DIE ALUM. 4/500MM A/F 39.0 EA 1RHU520-1000AL HEX. DIE ALUM. 1000MM A/F 52.5 EA 1


28

• NEST die for 12/13 ton Aluminium solid sector conductor• Suitable for Australian and New Zealand sector lugs and links• Requires an indent die for sector crimps

CABAC 12T DIES


HT130-A14NEST NEST SECT.ALU.4 CORE 70-120MM EA 1HT130-A12NEST NEST SECT.ALU.3 CORE 70-300MM EA 1HT130-A15NEST NEST SECT.ALU.4 CORE 150-300MM EA 1

DIES ALUMINIUM NEST CRIMP

Part No. MB52-50 • Wire Cutting die for 5 ton hydraulic crimping tools cutting Copper or Aluminium up diameter 10mm• Made from heat-treated carbon steel• No adjustments required• Less costly than dedicated cutting tools

HT50 WIRE CUTTING DIE 10MM OCABAC 5T DIESDIES CUTTING

Unit: EA Qty: 1

Part No. HT-131-CD • Cutting die for 12/13 ton C-type hydraulic crimping tools, with a cutting diameter of 16mm• Australian designed and manufactured• Less costly than dedicated cutting tools• No adjustments required for cutting different materials• Suits all 12/13 tonne ‘C’ or ‘U’ style crimp tools

WIRE CUTTER DIE - 12TCABAC 13T

Unit: EA Qty: 1

Part No. WT2-30 • Cutting die for 22/23 ton hydraulic crimping tools with a cutting diameter of 20mm• Made from heat-treated carbon steel

CUTTING DIE SET FOR ECW-H3D CRIMP HEADCEMBRE 23T DIES

Unit: EA Qty: 1


29

Part No. MC25-50 HT50 DIE-ALL SIZE INSULINK 25MMCABAC 5TDIES INSULINK

Unit: EA Qty: 1

Part No. MC35-50 • Die for Burndy Insulink• One die fits all

HT50 DIE-ALL SIZE INSULINK 35MM Unit: EA Qty: 1

Part No. ECW-H3D-AD • Adaptor for 22/23 ton crimp head to fit 12/13 ton C-type crimp dies• Suits Cembre crimp head ECW-H3D• Adapts 23 ton tool to crimp large range of lugs and links

ADAPTOR ECW-H3D 12 TON DIES12T ADAPTORSADAPTORS

Unit: EA Qty: 1

Part No. RHU520-AD • Adaptor to use 13 ton C-type dies with RHU520 52 ton crimp head• Fits standard 12/113 ton C-dies• Extends range of RHU520 to smaller size crimp dies

ADAPTOR RHU520 TO 12 TON DIE Unit: EA Qty: 1


30

Rugged Laser Cut Steel Trigger Guard

Spring loaded two stage trigger

Hydraulic Pole Saw™

Automatic Chain Oiler

High Strength Insulated

Fibreglass pole

Chip Deflector

The MSS range of long reach hydraulic pole saws are designed for safely trimming branches from either an aerial bucket, or from the ground. There are three standard lengths in the range providing an option for all applications.

• The industries lightest, most balanced Hydraulic Pole Saw• Dual Spool for use with either Open or Closed Centre hydraulic systems.• High Strength Insulated Fibreglass pole.• Greater internal and external support design at each end of the pole to

avoid hydraulic leakage.• Cartridge style valves for greater accuracy and more economical servicing.• “Cool running” handle design for operator comfort.• Automatic Chain Oiler.

Bar Size 13"Flow Range 4 - 8gpm

Operating Pressure 1,000 - 2,000psi

Pressure Port

9/16 - 18 Sae O Ring

Return Port

3/4 - 16 Sae O Ring

Technical DataSafety Features• All alloy components CNC machined from

solid Billet High Grade Aluminium Alloy for superior strength and reliability.

• Foam filled fiber glass pole.

• Individually Electrically Tested to International Standards. 100kv / 5 mins.

• Sprocket Guard.

• Rugged Laser Cut Steel Trigger Guard.

• Spring Loaded Two Stage Trigger.

• Chip Deflector - protecting the operator from flying chips.

ProudlyAustralian

“Cool running” handle

• Designed for safely trimming branches from either an aerial bucket or the ground• Light-weight and balanced with strong insulated fibreglass pole• Packed with safety features• Designed with a ‘Cool Running’ handle for operator comfort• Can be used on both open and closed hydraulic systems

MSP HYDRAULIC POLE SAW


MSS-HPS-1500-FF-C POLE SAW 150CM FOAM FILLED WITH COUPLERS EA 1MSS-HPS-1800-FF-C POLE SAW 180CM FOAM FILLED WITH COUPLERS EA 1MSS-HPS-2100-FF-C POLE SAW 210CM FOAM FILLED WITH COUPLERS EA 1

HYDRAULIC POLE SAWS


31

ProudlyAustralian

Technical DataTorque output 695nm 515 ft-lbs

Optimal flow range 15 - 30lpm 4-8 gpm

Working pressure 50 - 140bar 750 - 2,000psi

Weight 2.7kg 5.95lbs

Length 198mm 7.8"

Width 80mm 3.1"

Height 226mm 8.9"

Superior quality machined from solid billet lightweight premium grade aircraft alloy for superior strength and reliability.

Internal safety relief valve. Protects against hydraulic pressure spikes.

Heat Insulated, ergonomic handle designed for use with Live Line gloves.

Hi - Lo Torque Selector

Quick Change Direction Selector

Accessories available:

DRILL BITS IMPACT SOCKETS

HOSES COUPLERS

The MSS Enforcer Hydraulic Impact Wrench is the ideal tool for drilling holes, tightening and loosening hardware on the toughest treated hardwood power poles.

Featuring a HI-LO torque selector allowing the user to easily switch between high and low torque and a dual action spool making the tool suitable for use on both open and closed centre hydraulic circuits. Exclusive cartridge style valves for greater accuracy, and more economical servicing.

Part No. MSS-IW-DT716-TG-C Impact Wrench 7/16 Chuck Guard Couplers

Part No. MSS-IW-DT12-TG-C Impact Wrench 1/2 Sq Drive Guard & Couplers

Model shown: MSS-IW-DT716-TG-CShown with safety trigger guard incorporating lifting eye and flush face couplers. (Optional Extras)

Tri-Ball 7/16 Quick Change Chuck.

Dual spool selector for open and closed hydraulic systems.

Enforcer™

NEW

PATENTPENDING


32

• The MSS Enforcer HIdeal tool for drilling holes and tightening/loosening hardware on hardwood power poles• Easy to use HI-LO Torque Selector with a dual action spool• Ability to replace grips in the field if required• Better gripping characteristics between tool and glove/operator• Suitable for use on both open and closed centre hydraulic circuit

HYDRAULIC IMPACT WRENCHES


MSS-IW-DT716 ENFORCER IMPACT WRENCH 7/16 CHUCK EA 1MSS-IW-DT716-C ENFORCER IMPACT WRENCH7/16CHUCK&COUPLERS EA 1MSS-IW-DT716-TG ENFORCE IMPACT WRENCH7/16 CHUCKWITHGUARD EA 1

HYDRAULIC IMPACT WRENCHES

• The MSS Enforcer Hydraulic Impact Wrench is the ideal tool for drilling holes and tightening/loosening hardware on hardwood power poles

• Easy to use HI-LO Torque Selector• Dual action spool• Suitable for use on both open and closed centre hydraulic circuit• New and improved handle grip

MSP IMPACT WRENCHES


MSS-IW-DT716-TG-C ENFORCER IMPACT WRENCH 7/16 INC COUPLERS EA 1MSS-IW-DT12-TG-C ENFORCER IMPACTWRENCH1/2 DRGUARD&COUPLERS EA 1


33

• DOMINATOR III range of impact augers specifically designed with Australian conditions in mind• Low friction coating for improved chip removal• Heavy duty self feeding screw• Flared retraction lip for easier auger removal

MSP IMPACT AUGER BITS 205MM


MSS-0516S IMPACT AUGER - 8MM (5/16) X 205MM (8) EA 1MSS-0038S IMPACT AUGER - 10MM (3/8) X 205MM (8) EA 1MSS-0716S IMPACT AUGER - 11MM (7/16) X 205MM (8) EA 1MSS-0916S IMPACT AUGER - 14MM (9/16) X 205MM (8) EA 1MSS-0058S IMPACT AUGER - 16MM (5/8) X 205MM (8) EA 1

AUGER BITS AND ADAPTERS

Part No. MSS-0012MET • DOMINATOR III range of impact augers specifically designed with Australian conditions in mind• Low friction coating for improved chip removal• Heavy duty self feeding screw• Flared retraction lip for easier auger removal

IMPACT AUGER - 12MM X 457MM (18) Unit: EA Qty: 1




MSS-0916 IMPACT AUGER - 14MM (9/16) X 457MM (18) EA 1MSS-0058 IMPACT AUGER - 16MM (5/8) X 457MM (18) EA 1MSS-1116 IMPACT AUGER - 18MM (11/16) X 457MM (18) EA 1MSS-1116S IMPACT AUGER - 18MM (11/16) X 205MM (8) EA 1MSS-0034 IMPACT AUGER - 19MM (3/4) X 457MM (18) EA 1MSS-1316 IMPACT AUGER - 21MM (13/16) X 457MM (18) EA 1MSS-0078 IMPACT AUGER - 22MM (7/8) X 457MM (18) EA 1MSS-1516 IMPACT AUGER - 24MM (15/16) X 457MM (18) EA 1MSS-1000 IMPACT AUGER - 25MM (1) X 457MM (18) EA 1MSS-1018 IMPACT AUGER - 28MM (11/8) X 457MM (18) EA 1MSS-1916 IMPACT AUGER - 40MM (19/16) X 457MM(18 EA 1


34




MSS-0058L IMPACT AUGER - 16MM (5/8) X 610MM (24) EA 1MSS-1116L IMPACT AUGER - 18MM (11/16) X 610MM (24) EA 1MSS-0034L IMPACT AUGER - 19MM (3/4) X 610MM (24) EA 1MSS-1316L IMPACT AUGER - 21MM (13/16) X 610MM (24) EA 1MSS-0078L IMPACT AUGER - 22MM (7/8) X 610MM (24) EA 1MSS-1516L IMPACT AUGER - 24MM (15/16) X 610MM (24) EA 1MSS-1000L IMPACT AUGER - 25MM (1) X 610MM (24) EA 1MSS-1018L IMPACT AUGER - 28MM (11/8) X 610MM (24) EA 1


MSP IMPACT AUGER BITS CARBIDE TIPPED


MSS-0038S-CT IMPACT AUGER - 10MM X 205MM - TIPPED EA 1MSS-0058S-CT IMPACT AUGER - 16MM X 205MM - TIPPED EA 1MSS-0058-CT IMPACT AUGER - 16MM X 457MM - TIPPED EA 1MSS-0034-CT IMPACT AUGER - 19MM X 457MM - TIPPED EA 1MSS-0078-CT IMPACT AUGER - 22MM X 457MM - TIPPED EA 1

Part No. MSS-MM71612 • Socket Adaptor for use in impact wrenches• Use with all 1/2• Fit one to each socket for quick socket change

SOCKET ADAPTOR - MALE/MALE- 7/16QC- 1/2MSP IMPACT SOCKET ADAPTORS

Unit: EA Qty: 1


35

• Square Drive Impact Socket Insert Adaptor

MSP IMPACT SOCKET ADAPTORS


MSS-PA14 ADAPTOR IMPACT 3/8 FEMALE X 1/2 MALE EA 1MSS-PA24 ADAPTOR - FEMALE X MALE EA 1MSS-PA42 ADAPTOR - FEMALE X MALE EA 1

Part No. MSS-00148 • MSS range of DOMINATOR high performance power auger bits are designed for the toughest hard wood• Suitable for use in drills with a minimum 7/16• Huge range of sizes and lengths• Not suitable for use with impact wrenches

POWER AUGER - 6MM 1/4 X 205MM 8MSP POWER AUGER BITS 205MM

Unit: EA Qty: 1


POWER AUGER - 8MM 5/16 X 205MM 8 Unit: EA Qty: 1




36






POWER AUGER - 25MM 1 X 205MM 8 Unit: EA Qty: 1

• MSS range of DOMINATOR high performance power auger bits are designed for the toughest hard wood• Suitable for use in drills with a minimum 7/16• Huge range of sizes and lengths• Not suitable for use with impact wrenches



MSS-00388 POWER AUGER - 10MM 3/8 X 205MM 8 EA 1MSS-07168 POWER AUGER - 11MM 7/16 X 205MM 8 EA 1MSS-00128 POWER AUGER - 13MM 1/2 X 205MM 8 EA 1MSS-09168 POWER AUGER - 14MM 9/16 X 205MM 8 EA 1MSS-00588 POWER AUGER - 16MM 5/8 X 205MM 8 EA 1MSS-13168 POWER AUGER - 20MM 13/16 X 205MM 8 EA 1


37



• MSS range of DOMINATOR high performance power auger bits are designed for the toughest hard wood• Suitable for use in drills with a minimum 7/16• Huge range of sizes and lengths• Not suitable for use with impact wrenches

MSP POWER AUGER BITS 457MM


MSS-003818 POWER AUGER - 10MM 3/8 X 457MM 18 EA 1MSS-071618 POWER AUGER - 11MM 7/16 X 457MM 18 EA 1MSS-001218 POWER AUGER - 13MM 1/2 X 457MM 18 EA 1MSS-091618 POWER AUGER - 14MM 9/16 X 457MM 18 EA 1MSS-005818 POWER AUGER - 16MM 5/8 X 457MM 18 EA 1MSS-111618 POWER AUGER - 18MM 11/16 X 457MM 18 EA 1MSS-1011618 POWER AUGER - 27MM 11/16 X 457MM 18 EA 1MSS-131618 POWER AUGER - 20MM 13/16 X 457MM 18 EA 1MSS-007818 POWER AUGER - 22MM 7/8 X 457MM 18 EA 1MSS-1000018 POWER AUGER - 25MM 1 X 457MM 18 EA 1MSS-1001818 POWER AUGER - 29MM 11/8 X 457MM 18 EA 1MSS-1001418 POWER AUGER - 32MM 11/4 X 457MM 18 EA 1MSS-1003818 POWER AUGER - 35MM 13/8 X 457MM 18 EA 1MSS-1001218 POWER AUGER - 38MM 11/2 X 457MM 18 EA 1

Part No. MSS-FF12716-MOD • Use our Impact Augers in your 1/2• Modified with 3 ball bearings for positive lock on Auger bits

TRI BALL CHUCK - 7/16 X 0.5 Unit: EA Qty: 1


38

• Swedish made Momento long series impact sockets• Large range of sizes available

MSP IMPACT SOCKETS


MSS-4-1L IMPACT SOCKET - LONG -1 INCH - 0.5 SQ EA 1MSS-4-3-8L IMPACT SOCKET - LONG - 3/8 INCH - 1/2 SQ EA 1MSS-4-10L IMPACT SOCKET - LONG - 10MM - 1/2 SQ DR EA 1MSS-4-11L IMPACT SOCKET - LONG - 11MM - 1/2 SQ DR EA 1MSS-4-12L IMPACT SOCKET - LONG - 12MM - 1/2 SQ DR EA 1MSS-4-13L IMPACT SOCKET - LONG - 13MM - 1/2 SQ DR EA 1MSS-4-14L IMPACT SOCKET - LONG - 14MM - 1/2 SQ DR EA 1MSS-4-15L IMPACT SOCKET - LONG - 15MM - 1/2 SQ DR EA 1MSS-4-16L IMPACT SOCKET - LONG - 16MM - 1/2 SQ DR EA 1MSS-4-17L IMPACT SOCKET - LONG - 17MM - 1/2 SQ DR EA 1MSS-4-18L IMPACT SOCKET - LONG - 18MM - 1/2 SQ DR EA 1MSS-4-19L IMPACT SOCKET - LONG - 19MM - 1/2 SQ DR EA 1MSS-4-20L IMPACT SOCKET - LONG - 20MM - 1/2 SQ DR EA 1MSS-4-21L IMPACT SOCKET - LONG - 21MM - 1/2 SQ DR EA 1MSS-4-22L IMPACT SOCKET - LONG - 22MM - 1/2 SQ DR EA 1MSS-4-23L IMPACT SOCKET - LONG - 23MM - 1/2 SQ DR EA 1MSS-4-24L IMPACT SOCKET - LONG - 24MM - 1/2 SQ DR EA 1MSS-4-26L IMPACT SOCKET - LONG - 26MM - 1/2 SQ DR EA 1MSS-4-27L IMPACT SOCKET - LONG - 27MM - 1/2 SQ DR EA 1MSS-4-28L IMPACT SOCKET - LONG - 28MM - 1/2 SQ DR EA 1MSS-4-30L IMPACT SOCKET - LONG - 30MM - 1/2 SQ DR EA 1MSS-4-32L IMPACT SOCKET - LONG - 32MM - 1/2 SQ DR EA 1MSS-2-33L IMPACT SOCKET - LONG 33MM AF - SQ EA 1MSS-2-33L-PA42 IMPACT SOCKET - LONG - 33MM - 1/2 SQ DR EA 1MSS-2-34L IMPACT SOCKET - LONG 34MM AF - SQ EA 1MSS-2-34L-PA42 IMPACT SOCKET - LONG - 34MM - 1/2 SQ DR EA 1MSS-2-36L IMPACT SOCKET - LONG 36MM AF - SQ EA 1MSS-2-36L-PA42 IMPACT SOCKET - LONG - 36MM - 1/2 SQ DR EA 1MSS-2-37L IMPACT SOCKET - LONG 37MM AF - SQ EA 1MSS-2-37L-PA42 IMPACT SOCKET - LONG - 37MM - 1/2 SQ DR EA 1MSS-2-38L IMPACT SOCKET - LONG 38MM AF - SQ EA 1MSS-2-38L-PA42 IMPACT SOCKET - LONG - 38MM - 1/2 SQ DR EA 1

IMPACT SOCKETS


39

Part No. MSS-BODY66 • Coupler for medium pressure hydraulic systems• For use with the KompressorTM, EnforcerTM and Hydraulic Pole Saw• Male version also available (Part No. MSS-NOSE66)

FLUSH FACE COUPLING FEMALE - 3/8 BODYMSP COUPLERSCOUPLERS

Unit: EA Qty: 1

Part No. MSS-NOSE66 • Coupler for medium pressure hydraulic systems• For use with the KompressorTM, EnforcerTM and Hydraulic Pole Saw• Female version also available (Part No. MSS-BODY66)

FLUSH FACE COUPLER NIPPLE - 3/8 NOSE Unit: EA Qty: 1


40

ECW-H3D4/500AL 27

HPP1 19

HPP2 20

HT-131-CD 28

HT-150/185AL 26

HT-16PT 24

HT-19/375AL 26

HT-22.3CU 22

HT-240/300AL 26

HT-25ABC 27

HT-25PT 24

HT-35/95ABC 27

HT-35PT 24

HT-50/70AL 26

HT-50PT 24

HT-6/35AL 26

HT-7/225AL 26

HT-7/250AL 26

HT-7/300-375AL 26

HT-7/450AL 26

HT-70PT 24

HT-95/120AL 26

HT-95/150ABC 27

HT-95PT 24

HT-CACC 25

HT-CAEC 25

HT-TC026 14

HT-TC055 14

HT-TC065 15

HT-TC0851 15

HT130-A12NEST 28

HT130-A14NEST 28

HT130-A15NEST 28

HT130-A16INDENT 26

HT130-A18INDENT 26

HT130-A19INDENT 26

HT130-C-10 23

HT130-C-120 23

HT130-C-150 23

HT130-C-16 23

HT130-C-185 23

HT130-C-240 23

HT130-C-25 23

ASC30-36 13

AU130-C 9

B035-10 22

B035-120 22

B035-16 22

B035-25 22

B035-35 22

B035-50 22

B035-6 22

B035-70 22

B035-95 22

B1300-CT 7

B1300L-CT 7

B131-C CARCHARGER 12

B1350-CT 6

B1350-UCT 7

B1350L-CT 7

B15MDT 5

B35-50MDT 5

B500T 5

B70M-P24 19

BTC250T 15

BTC500T 15

BTC550T 15

BTC650T 16

BTC950T 16

CB1430H 13

CB1840L 13

CP1120-W-1000-KV 12

CPC-30A 16

CYO-510B 10

DC1414 12

DDQ30 16

DDQ33 16

DDQ80 17

DIESET 24

DIESET2 24

DIESET3 27

ECW-H3D 10

ECW-H3D-400 24

ECW-H3D-500 24

ECW-H3D-630 24

ECW-H3D-AD 29

INDEX

HT130-C-300 23

HT130-C-35 23

HT130-C-50 23

HT130-C-6 23

HT130-C-70 23

HT130-C-95 23

HT130-C0 23

HT130-C1011 23

HT130-C997 23

HT130-CC 23

HT131-C 8

HT131-C-WHO 8

HT131-UC 8

HT131-UC-WHO 9

HT131L-C-WHO 9

HT131LN-C 9

HT51 5

KSMP-3AR 19

M104-50 22

M115-50 22

M132-50 26

M140-50 26

M142-50 22

M148-50 22

M165-50 22

M173-50 26

M183-50 22

M190-50 22

M200-50 22

M215-50 26

M220-50 26

M44-50 22

M57-50 22

M63-50 22

M77-50 22

M82-50 22

M90-50 26

M92-50 22

M96-50 22

MB52-50 28

MC185-C 25

MC25-50 29

MC25-C 25


41

MSS-1001818 37

MSS-1003818 37

MSS-1011618 37

MSS-1018 33

MSS-1018L 34

MSS-1116 33

MSS-111618 37

MSS-11168 35

MSS-1116L 34

MSS-1116S 33

MSS-1316 33

MSS-131618 37

MSS-13168 36

MSS-1316L 34

MSS-1516 33

MSS-15168 36

MSS-1516L 34

MSS-1916 33

MSS-2-33L 38

MSS-2-33L-PA42 38

MSS-2-34L 38

MSS-2-34L-PA42 38

MSS-2-36L 38

MSS-2-36L-PA42 38

MSS-2-37L 38

MSS-2-37L-PA42 38

MSS-2-38L 38

MSS-2-38L-PA42 38

MSS-4-10L 38

MSS-4-11L 38

MSS-4-12L 38

MSS-4-13L 38

MSS-4-14L 38

MSS-4-15L 38

MSS-4-16L 38

MSS-4-17L 38

MSS-4-18L 38

MSS-4-19L 38

MSS-4-1L 38

MSS-4-20L 38

MSS-4-21L 38

MSS-4-22L 38

MSS-4-23L 38

MC35-50 29

MC35-C 25

MC70-C 25

MC95-C 25

MSS-00018 36

MSS-001218 37

MSS-00128 36

MSS-0012MET 33

MSS-00148 35

MSS-0034 33

MSS-0034-CT 34

MSS-003418 37

MSS-00348 36

MSS-0034L 34

MSS-003818 37

MSS-00388 36

MSS-0038S 33

MSS-0038S-CT 34

MSS-0058 33

MSS-0058-CT 34

MSS-005818 37

MSS-00588 36

MSS-0058L 34

MSS-0058S 33

MSS-0058S-CT 34

MSS-0078 33

MSS-0078-CT 34

MSS-007818 37

MSS-0078L 34

MSS-05168 35

MSS-0516S 33

MSS-071618 37

MSS-07168 36

MSS-0716S 33

MSS-0916 33

MSS-091618 37

MSS-09168 36

MSS-0916S 33

MSS-1000 33

MSS-1000018 37

MSS-1000L 34

MSS-1001218 37

MSS-1001418 37

MSS-4-24L 38

MSS-4-26L 38

MSS-4-27L 38

MSS-4-28L 38

MSS-4-3-8L 38

MSS-4-30L 38

MSS-4-32L 38

MSS-BODY66 39

MSS-C130-281CU 23

MSS-C130-42-18V 6

MSS-C130-42-M 7

MSS-C130-42RH 8

MSS-FF12716-MOD 37

MSS-HCP-45SV 19

MSS-HPS-1500-FF-C 30



MSS-IW-DT12-TG-C 32

MSS-IW-DT716 32

MSS-IW-DT716-C 32

MSS-IW-DT716-TG 32

MSS-IW-DT716-TG-C 32

MSS-KREC-54AC 18

MSS-LPHC-750-C 8

MSS-MM71612 34

MSS-NOSE66 39

MSS-PA14 35

MSS-PA24 35

MSS-PA42 35

MSS-RH23 11

MSS-RH60 12

MSS-RH60-23.1AFCU 21





MSS-S100-RH 17

MSS-S120-RH 18

MSS-S25-RH 17

MSS-S40-18V 18

MSS-S40-M 18

MSS-S40-RH 17

MSS-S60-RH 17


42

Y-PA6B JAWS 6MSS-U130-18V 6

MSS-U130-RH 18

PA-6B 5

PA-6BHD 6

PD115.5 21

PD16.2 21

PD20.4 21

PD22.5 21

PD25.4 21

PD32.5 21

PD40.5 21

PD50.8 21

PD60.5 21

PD63.5 21

PD88.9 21

PDS32 20

PDSPACER 20

PDSPINDLE 20

PO7000 19

RHC131 10

RHC131L-N 10

RHU131-C 10

RHU520 11

RHU520-1000 25

RHU520-1000AL 27

RHU520-4/500AL 27

RHU520-400 25

RHU520-500 25

RHU520-630 25

RHU520-800 25

RHU520-AD 29

RHU600 11

SKP-15 20

TC04 13

TC055 13

TC085 14

TC096 14

TC120 14

WT2-30 28

Y-ECW-3D CASE 11

Y-ECW-3D D/HOLD 11

Y-ESC600 12

Y-HT131-CASE 9

In support of our policy of continuous product improvement we reserve the right to change materials and specifications without notice. Drawings, where used, are not to scale. All dimensions are in millimetres and sizes given are approximate. Where possible, technical MSDS data sheets are made available on the website. All products should be installed and used in accordance

with manufacturer’s instructions provided. Warning: products may be the subject of registered designs and patents. Refer to website for terms and conditions on warranty.

Every effort has been made to ensure accuracy of content. However no liability will be met by CABAC or its suppliers for any errors or ommisions. Product data and information is not binding.

All brands and logos are registered trademarks and are subject to copyright laws.

No part of this catalogue can be reproduced without consent of CABAC.

Part No. 3010PWRV0117

specialist tools - technicalqr.com.au · specialist tools and accessories 4 the kompressor is...

Documents