span - get started
TRANSCRIPT
7/25/2019 Span - Get Started
http://slidepdf.com/reader/full/span-get-started 1/4
SPAN www.gtsoft.org 1
SPAN: Getting Started
Start SPAN by selecting: Start u Programs u GTSoft u SPAN
Select the Help button, or press the F1 key on your keyboard at any time to view the online Help file.
Click the New button on the toolbar to open the main design window.
Follow the instructions below to see how easy it is to create a design:
Step 1: Open Define Box.Double-click anywhere in themain window to open theDefine Box. The Define Box is used to create and edityour design.
Drag the Define Box to theside to let you see what ishappening in the main
window.
Click the Beam tab of theDefine Box.
Click the arrow beside theName box and select Titan225 beam (226400) from thedrop-down list.
The main diagram changesafter any entry in the DefineBox.
Step 2: Fix ends of beam.
Click the Supports tab of theDefine Box to define thesupports.
Click Fix left and Fix right to fix the ends of the beam .
7/25/2019 Span - Get Started
http://slidepdf.com/reader/full/span-get-started 2/4
SPAN www.gtsoft.org 2
Step 3: Add a suppor t.
Click the Supports tab of theDefine Box to define thesupports.
Enter a support at 3.0m using the Supports grid.
Step 4: Define loads.
Click the Loads tab of theDefine Box to define theloads.
Click the Distributed grid toenter uniformly distributedloads.
Make the entries shown to
define a UDL of 70.0kN/m from 0.0m to 3.0m and aUDL of 35.0kN/m from 3.0m to 6.4m.
Step 5: Toolbar.
Superimpose various itemson the main diagram usingthe toolbar buttons. Click abutton again to remove thesuperimposed item.
7/25/2019 Span - Get Started
http://slidepdf.com/reader/full/span-get-started 3/4
SPAN www.gtsoft.org 3
Step 8: Tables page.
Open the Tables page.
This displays bendingmoment, shear force anddeflection tables.
Step 7: Change view.
Open theGraphs page.
This displays bendingmoment, deflection andshear force graphs.
Step 6: Change view.Vary the view using the tabsabove the main window.
Open the Input/Output page. This
lists thedesign inputand solution.
Click the Zoom buttonto read the text moreclearly.
Click the Zoom buttonagain to return to full screenmode.
7/25/2019 Span - Get Started
http://slidepdf.com/reader/full/span-get-started 4/4
SPAN www.gtsoft.org 4
Shortcuts and ScreenHotspots.
Double click on the indicatedhotspots to open the DefineBox at the appropriate page.
Eg. Double click region 2
(the beam) to open theDefine Box at the Beampage. Double click in region3 to open the Define Box atthe Supports page.
The Databases.
Click the Databasebutton on the toolbar to open the databasewindow.
Click the Clienttab to editcustomers in theclient database.
Click the Beamtab to edit beamsin the beamdatabase.
Read the online Help file or the SPAN manual for more information on using SPAN.
For further details or assistance, see www.GTSoft.org or email:
The Define Box.The Define Box pages are explained in greater depth in the SPAN manual and the online Help, including those notmentioned in this brief introduction:
The Job page is used to enter customer details.
The Inertia page is used to define beams of varying Moment Of Inertia.
The Equal Centres section of the Supports page is used to define equally spacedsupports.
The Point and Custom grids of the Loads page are used to define different load types.
The Setup page is used to enter user contact details, select units and set various otherdisplay options.