space mgmt reference data

Space Management Reference Data Guide

Version 2014 (10.0)

September 2013

DSP3D-PE-200028L

Copyright Copyright 2002-2013 Intergraph Corporation. All Rights Reserved. Intergraph is part of Hexagon. Including software, file formats, and audiovisual displays; may be used pursuant to applicable software license agreement; contains confidential and proprietary information of Intergraph and/or third parties which is protected by copyright law, trade secret law, and international treaty, and may not be provided or otherwise made available without proper authorization from Intergraph Corporation. Portions of this software are owned by Spatial Corp. 1986-2013. All Rights Reserved. Portions of the user interface copyright 2012-2013 Telerik AD.

U.S. Government Restricted Rights Legend Use, duplication, or disclosure by the government is subject to restrictions as set forth below. For civilian agencies: This was developed at private expense and is "restricted computer software" submitted with restricted rights in accordance with subparagraphs (a) through (d) of the Commercial Computer Software - Restricted Rights clause at 52.227-19 of the Federal Acquisition Regulations ("FAR") and its successors, and is unpublished and all rights are reserved under the copyright laws of the United States. For units of the Department of Defense ("DoD"): This is "commercial computer software" as defined at DFARS 252.227-7014 and the rights of the Government are as specified at DFARS 227.7202-3. Unpublished - rights reserved under the copyright laws of the United States. Intergraph Corporation 300 Intergraph Way Huntsville, AL 35813

Documentation Documentation shall mean, whether in electronic or printed form, User's Guides, Installation Guides, Reference Guides, Administrator's Guides, Customization Guides, Programmer's Guides, Configuration Guides and Help Guides delivered with a particular software product.

Other Documentation Other Documentation shall mean, whether in electronic or printed form and delivered with software or on eCustomer, SharePoint, or box.net, any documentation related to work processes, workflows, and best practices that is provided by Intergraph as guidance for using a software product.

Terms of Use a. Use of a software product and Documentation is subject to the End User License Agreement ("EULA") delivered with the

software product unless the Licensee has a valid signed license for this software product with Intergraph Corporation. If the Licensee has a valid signed license for this software product with Intergraph Corporation, the valid signed license shall take precedence and govern the use of this software product and Documentation. Subject to the terms contained within the applicable license agreement, Intergraph Corporation gives Licensee permission to print a reasonable number of copies of the Documentation as defined in the applicable license agreement and delivered with the software product for Licensee's internal, non-commercial use. The Documentation may not be printed for resale or redistribution.

b. For use of Documentation or Other Documentation where end user does not receive a EULA or does not have a valid license agreement with Intergraph, Intergraph grants the Licensee a non-exclusive license to use the Documentation or Other Documentation for Licensees internal non-commercial use. Intergraph Corporation gives Licensee permission to print a reasonable number of copies of Other Documentation for Licensees internal, non-commercial. The Other Documentation may not be printed for resale or redistribution. This license contained in this subsection b) may be terminated at any time and for any reason by Intergraph Corporation by giving written notice to Licensee.

Disclaimer of Warranties Except for any express warranties as may be stated in the EULA or separate license or separate terms and conditions, Intergraph Corporation disclaims any and all express or implied warranties including, but not limited to the implied warranties of merchantability and fitness for a particular purpose and nothing stated in, or implied by, this document or its contents shall be considered or deemed a modification or amendment of such disclaimer. Intergraph believes the information in this publication is accurate as of its publication date. The information and the software discussed in this document are subject to change without notice and are subject to applicable technical product descriptions. Intergraph Corporation is not responsible for any error that may appear in this document. The software, Documentation and Other Documentation discussed in this document are furnished under a license and may be used or copied only in accordance with the terms of this license. THE USER OF THE SOFTWARE IS EXPECTED TO MAKE THE FINAL EVALUATION AS TO THE USEFULNESS OF THE SOFTWARE IN HIS OWN ENVIRONMENT. Intergraph is not responsible for the accuracy of delivered data including, but not limited to, catalog, reference and symbol data. Users should verify for themselves that the data is accurate and suitable for their project work.

Limitation of Damages IN NO EVENT WILL INTERGRAPH CORPORATION BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL INCIDENTAL, SPECIAL, OR PUNITIVE DAMAGES, INCLUDING BUT NOT LIMITED TO, LOSS OF USE OR PRODUCTION, LOSS OF

2 Space Management Reference Data Guide

REVENUE OR PROFIT, LOSS OF DATA, OR CLAIMS OF THIRD PARTIES, EVEN IF INTERGRAPH CORPORATION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. UNDER NO CIRCUMSTANCES SHALL INTERGRAPH CORPORATIONS LIABILITY EXCEED THE AMOUNT THAT INTERGRAPH CORPORATION HAS BEEN PAID BY LICENSEE UNDER THIS AGREEMENT AT THE TIME THE CLAIM IS MADE. EXCEPT WHERE PROHIBITED BY APPLICABLE LAW, NO CLAIM, REGARDLESS OF FORM, ARISING OUT OF OR IN CONNECTION WITH THE SUBJECT MATTER OF THIS DOCUMENT MAY BE BROUGHT BY LICENSEE MORE THAN TWO (2) YEARS AFTER THE EVENT GIVING RISE TO THE CAUSE OF ACTION HAS OCCURRED. IF UNDER THE LAW RULED APPLICABLE ANY PART OF THIS SECTION IS INVALID, THEN INTERGRAPH LIMITS ITS LIABILITY TO THE MAXIMUM EXTENT ALLOWED BY SAID LAW.

Export Controls Intergraph Corporations software products and any third-party Software Products obtained from Intergraph Corporation, its subsidiaries, or distributors (including any Documentation, Other Documentation or technical data related to these products) are subject to the export control laws and regulations of the United States. Diversion contrary to U.S. law is prohibited. These Software Products, and the direct product thereof, must not be exported or re-exported, directly or indirectly (including via remote access) under the following circumstances: a. To Cuba, Iran, North Korea, Sudan, or Syria, or any national of these countries. b. To any person or entity listed on any U.S. government denial list, including but not limited to, the U.S. Department of Commerce

Denied Persons, Entities, and Unverified Lists, http://www,bis.doc.gov/complianceandenforcement/liststocheck.htm, the U.S. Department of Treasury Specially Designated Nationals List, www.treas.gov/offices/enforcement/ofac/http://www.pmddtc.state.gov/compliance/debar.html, and the U.S. Department of State Debarred List.

c. To any entity when Licensee knows, or has reason to know, the end use of the Software Product is related to the design, development, production, or use of missiles, chemical, biological, or nuclear weapons, or other un-safeguarded or sensitive nuclear uses.

d. To any entity when Licensee knows, or has reason to know, that an illegal reshipment will take place. Any questions regarding export or re-export of these Software Products should be addressed to Intergraph Corporations Export Compliance Department, Huntsville, Alabama 35894, USA.

Trademarks Intergraph, the Intergraph logo, PDS, SmartPlant, FrameWorks, I-Convert, I-Export, I-Sketch, SmartMarine, IntelliShip, INtools, ISOGEN, MARIAN, SmartSketch, SPOOLGEN, SupportManager, SupportModeler, and Intergraph Smart are trademarks or registered trademarks of Intergraph Corporation or its subsidiaries in the United States and other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation. ACIS is a registered trademark of SPATIAL TECHNOLOGY, INC. Infragistics, Presentation Layer Framework, ActiveTreeView Ctrl, ProtoViewCtl, ActiveThreed Ctrl, ActiveListBar Ctrl, ActiveSplitter, ActiveToolbars Ctrl, ActiveToolbars Plus Ctrl, and ProtoView are trademarks of Infragistics, Inc. Incorporates portions of 2D DCM, 3D DCM, and HLM by Siemens Product Lifecycle Management Software III (GB) Ltd. All rights reserved. Gigasoft is a registered trademark, and ProEssentials a trademark of Gigasoft, Inc. VideoSoft and VXFlexGrid are either registered trademarks or trademarks of ComponentOne LLC 1991-2013, All rights reserved. Oracle, JD Edwards, PeopleSoft, and Retek are registered trademarks of Oracle Corporation and/or its affiliates. Tribon is a trademark of AVEVA Group plc. Alma and act/cut are trademarks of the Alma company. Other brands and product names are trademarks of their respective owners.

Space Management Reference Data Guide 3

Contents Preface .......................................................................................................................................................... 7

Documentation Set ................................................................................................................................. 7 Documentation Comments ................................................................................................................... 10 Whats New in Space Management Reference Data ........................................................................... 10

Space Management Reference Data ........................................................................................................ 11

Space Management Sheets ...................................................................................................................... 13

Support Areas Sheet ............................................................................................................................. 14 Hazardous Atmospheres Sheet ............................................................................................................ 14 Security Zones Sheet ............................................................................................................................ 15 Personal Protection Zones Sheet ......................................................................................................... 15 Interference Volumes Sheet ................................................................................................................. 16 Pipe Avoidance Zone Sheet ................................................................................................................. 16 Pipe Rack Zone Sheet .......................................................................................................................... 16 Icarus Open Steel Zones Sheet ............................................................................................................ 18 Pipe Attraction Zone Sheet ................................................................................................................... 18 Pipe Connection Zone Sheet ................................................................................................................ 19 Space Group Sheet .............................................................................................................................. 19

Add an Area, Zone, or Interference Volume to the Catalog .................................................................. 21

Index ........................................................................................................................................................... 23


Contents


This document is a reference data guide for the Intergraph SmartTM 3D Space Management task. The purpose of this document is to describe the reference data delivered with the software for this task. Reference data includes both catalog data and specification data. Catalog data includes the parts that you place in the model, such as piping components and equipment. Specification data includes the rules that govern how those parts are placed and connected.

Documentation Set Intergraph SmartTM 3D documentation is available as Adobe PDF files. The content is the same as the online Help. To access these PDF documents, click Help > Printable Guides in the software. The documentation set is divided into four categories: Administrative guides contain information about installing, configuring, customizing, and

troubleshooting. User's guides provide command reference and how-to information for working in each task. Reference data guides define the reference data workbooks. Not all tasks have reference

data. ISOGEN guides.

Administrative Guides Intergraph SmartTM 3D Installation Guide - Provides instructions on installing and configuring the software. Project Management User's Guide - Provides instructions for setting up the databases, creating permission groups, backing up and restoring project data, assigning access permissions to the model, defining and managing locations for Global Workshare, and version upgrade. Global Workshare Guide - Provides instructions for setting up the software and the databases to work in a workshare environment. Interference Checking Guide - Provides information on installing, configuring, and using the interference detection service. Integration Reference Guide - Provides information about installing, configuring, and using Smart 3D in an integrated environment. Interpreting Human Piping Specifications - Provides information about how to interpret human piping specifications so that you can create the corresponding piping specification in the software. Export to PDMS - Provides information about how to export model data from Smart 3D to PDMS. Specific guidelines relating to best practices and known limitations of the export functionality are also included. Point Cloud Reference - Provides information for referencing point cloud files provided by point cloud vendors in Smart 3D. Troubleshooting Reference Guide - Provides information on how to resolve errors that you might encounter in the software by documenting troubleshooting tips, error messages, and To Do List messages.

Preface


Preface Plant Design System (PDS) Guide - Provides all information needed to use PDS with Smart 3D. Topics include referencing active PDS projects in Smart 3D, exporting PDS data and importing that data into Smart 3D, and converting PDS reference data to Smart 3D reference data. Intergraph SmartTM 3D Programmer's Guide - Provides information about custom commands, naming rules, and symbol programming. If you install the Programming Resources, this document is delivered to the [Product Folder]\Programming\Help folder.

User's Guides Catalog User's Guide - Provides information about viewing, editing, and creating reference data and select lists (codelists). Common User's Guide - Provides information about defining workspaces, manipulating views, and running reports. Compartmentation User's Guide - Provides instruction for placing volume objects such as compartments and zones in the model. Electrical User's Guide - Provides information about routing electrical cable, cableway, cable tray, and conduit. Equipment and Furnishings User's Guide - Provides information about placing equipment. Geometry Analysis and Repair User's Guide - Provides instructions for importing and exporting model data, checking the data against a defined set of requirements, and repairing the data. Grids User's Guide - Provides instructions for creating coordinate systems, elevation grid planes, vertical grid planes, radial cylinders, radial planes, grid arcs, and grid lines. Hangers and Supports User's Guide - Provides instructions on placing piping, duct, and cableway supports in the model. Hole Management User's Guide - Provides instructions for placing, reviewing, and approving holes in a structure. HVAC User's Guide - Provides instructions for routing HVAC duct. Molded Forms User's Guide - Provides instructions for placing hull, bulkheads, major openings, stiffeners, and other major structural components in the model. Orthographic Drawings User's Guide - Provides information about creating and managing orthographic drawings. Piping Isometric Drawings User's Guide - Provides information about creating and managing piping isometric drawings. Piping User's Guide - Provides instructions for routing pipe and placing valves, taps, and pipe joints. Planning User's Guide - Provides instructions about defining the assembly hierarchy (production bill of material) by creating blocks and assemblies and by specifying the assembly sequence. Reports User's Guide - Provides information about creating and managing spreadsheet reports. Space Management User's Guide - Provides instructions for placing space objects such as areas, zones, interference volumes, and drawing volumes in the model. Structural Analysis User's Guide - Provides instructions for defining loads, load cases, load combinations, and the importing and exporting of analytical data. Structural Detailing User's Guide - Provides instructions for creating, detailing, and maintaining the structural members of a model. Structural Manufacturing User's Guide - Provides instructions for creating and maintaining manufacturing objects such as templates, jigs, and margins. Structure User's Guide - Provides instructions for placing structural members, such as beams, columns, slabs, openings, stairs, ladders, equipment foundations, and handrails.


Preface Systems and Specifications User's Guide - Provides instructions for creating systems and selecting the available specifications for each system type.

Reference Data Guides 2D Symbols User's Guide - Provides command reference information and procedural instructions for creating 2D symbols used to represent collars, clips, profiles, brackets, and other items. 2D Symbols Reference Data Guide - Provides information about the two-dimensional symbols used in all tasks. Compartmentation Reference Data Guide - Provides information about compartmentation reference data. Drawings and Reports Reference Data Guide - Provides information about reports reference data. Electrical Reference Data Guide - Provides information about electrical cable, cableway, cable tray, and conduit reference data. Electrical 3D Symbols Reference - Provides information about the cable tray and conduit 3D symbols that are available. Equipment and Furnishings Reference Data Guide - Provides information about equipment reference data. Equipment 3D Symbols Reference - Provides information about the equipment, equipment component, design shapes, and design aides 3D symbols that are available. Hangers and Supports Reference Data Guide - Provides information about hangers and supports reference data. Hangers and Supports 3D Symbols Reference - Provides information about the hanger and support 3D symbols that are available. Hangers and Supports SmartPart Symbols Reference - Provides information about the hanger and support SmartPart symbols that are available. Hole Management Reference Data Guide - Provides information about hole reference data. HVAC Reference Data Guide - Provides information about HVAC reference data. HVAC 3D Symbols Reference - Provides information about the HVAC 3D symbols that are available. Reference Data Guide - Provides instructions about the Bulkload utility, codelists, and the reference data common to several disciplines. Piping Reference Data Guide - Provides information about piping reference data including piping specifications, piping specification rules, piping parts, and piping symbols. Piping 3D Symbols Reference - Provides information about the piping 3D symbols that are available. Space Management Reference Data Guide - Provides information about space management reference data. Structure Reference Data Guide - Provides information about structural reference data. Structure 3D Symbols Reference - Provides information about the stair, ladder, footings, and equipment foundation 3D symbols that are available. Structural Reference Data Overview - Provides an overview of the marine mode structural reference data library.


Preface ISOGEN Guides Symbol Keys Reference Guide - Provides information about the symbol keys for isometric drawings. This guide is from Alias, the makers of ISOGEN.

Documentation Comments We welcome comments or suggestions about this documentation. You can send us an email at: [email protected]. Documentation updates for supported software versions are available from eCustomer https://crmweb.intergraph.com.

Whats New in Space Management Reference Data The following changes have been made to the Space Management reference data. Version 2014 (10.0) No changes were made to this document for this release.


S E C T I O N 1

Before working with space management reference data, you must be familiar with how the software handles reference data in general. If you have not already done so, read and understand the following important concepts and procedures described in the Reference Data Guide: Custom attributes Symbol creation Codelists (also referred to as "select lists") Naming rules Bulkloading In the Space Management task, the reference data contains the requirements and properties necessary to create areas, zones, and interference volumes. The space management reference data is defined in the Microsoft Excel workbook called SpaceMgmt.xls. The software delivers this workbook to the [Product Folder]\CatalogData\BulkLoad\DataFiles folder. Reference data determines the values that populate the various dialog boxes in the Space Management task. For example, for a pipe attraction zone, the reference data for the Space Management task populates the Zone Properties dialog box. You can edit the specific values for the areas, zones, and volumes that are in your model.

See Also Space Management Sheets (on page 13)

Space Management Reference Data


Space Management Reference Data


S E C T I O N 2

The SpaceMgmt.xls workbook contains the reference data for the Space Management task. A variety of pre-defined spaces are delivered with the software. You can customize the delivered reference data in order to fit your company's standards or current project. The sheets that are unique to SpaceMgmt.xls are described below. For more information on common sheets, refer to the Reference Data Guide available from the Help > Printable Guides command in the software. Space Group - Defines the hierarchy under the Space folder in the Catalog hierarchy. For more information, see the Space Group Sheet (on page 19).

Areas Support Areas - Defines properties for a support area in the model. For more information, see the Support Areas Sheet (on page 14).

Generic Zones Hazardous Atmospheres - Defines properties for a zone in the model in which hazardous environmental conditions are present. For more information, see the Hazardous Atmospheres Sheet (on page 14). Security Zones - Defines properties for a zone in the model with secured access. For more information, see the Security Zones Sheet (on page 15). Personal Protection Zones - Defines properties for a zone in the model in which personnel are required to wear personal protection equipment. For more information, see the Personal Protection Zones Sheet (on page 15).

Interference Volumes Interference Volume - Specifies information about the interference volumes. For more information, see the Interference Volumes Sheet (on page 16).

Icarus Zones These zones define properties needed by the Aspen Icarus Process Evaluator to compute a cost that is based on Alias auto-routing. For more information, see Icarus Open Steel Zones Sheet (on page 18).

Aspen Icarus Process Evaluator is a third-party software product that allows process engineers to accurately evaluate the economic impact of their process designs. Pipe Avoidance Zone - Defines properties for a zone in the model that repels pipe. For more information, see the Pipe Avoidance Zone Sheet (on page 16). Pipe Rack Zone - Defines properties for a zone in the model that supports piping or cable. For more information, see the Pipe Rack Zone Sheet (on page 16). Pipe Attraction Zone - Defines properties for a zone in the model that attracts pipe. For more information, see the Pipe Attraction Zone Sheet (on page 18). Pipe Connection Zone - Defines properties for a zone in the model that supports routed pipe. For more information, see the Pipe Connection Zone Sheet (on page 19).

Space Management Sheets


Space Management Sheets Common Properties Each sheet in the SpaceMgmt.xls workbook consists of common and unique properties. The common properties are listed in the order that they appear, from left to right, on the worksheet. Unique properties are discussed in the individual worksheet topics. PartNumber - Specifies the part number for the space object.

All part numbers must be unique across the entire catalog. PartDescription - Type a description for the space object. When you place or edit the space object in the model, this text appears in the Type box on the ribbon. SymbolDefinition - Type the symbol definition for the space object. If the symbol definition for a part is the same as the definition for the part class, type NULL or leave blank.

See Also Space Management Reference Data (on page 11) Space Group Sheet (on page 19)

Support Areas Sheet The Support Areas sheet in the SpaceMgmt.xls workbook defines areas that are used as support areas. Areas within the model reserved for processes such as waste treatment, product packaging, and shipping and receiving are commonly known as support areas. In addition to the common properties discussed in Space Management Sheets (on page 13), the following properties can be defined for a support area:

All part numbers must be unique across the entire catalog. WeldingPermitted - Type 1 if welding in the area is allowed. CorrosiveEnvironment - Type 1 if the area has corrosive conditions. BoltingPermitted - Type 1 if bolting in the area is allowed.

See Also Space Management Reference Data (on page 11) Hazardous Atmospheres Sheet (on page 14) Icarus Open Steel Zones Sheet (on page 18) Personal Protection Zones Sheet (on page 15) Pipe Attraction Zone Sheet (on page 18) Pipe Avoidance Zone Sheet (on page 16) Pipe Connection Zone Sheet (on page 19) Pipe Rack Zone Sheet (on page 16) Security Zones Sheet (on page 15) Support Areas Sheet (on page 14)

Hazardous Atmospheres Sheet The Hazardous Atmospheres sheet in the SpaceMgmt.xls workbook defines zones in which hazardous environmental conditions are present. In addition to the common properties discussed in Space Management Sheets (on page 13), the following properties can be defined for a zone that houses hazardous atmospheres:

All part numbers must be unique across the entire catalog. Classification - Type the corresponding definition for the hazardous environmental condition present in the zone.


Space Management Sheets NEMAEnclosureType - Type the corresponding NEMA enclosure type for the hazardous environmental condition present in the zone.


Security Zones Sheet The Security Zones sheet in the SpaceMgmt.xls workbook defines zones with secured access. In addition to the common properties discussed in Space Management Sheets (on page 13), the following properties can be defined for a security zone within the model: SecurityAccess - Type the description of the type of security access required for the zone.


Personal Protection Zones Sheet The Personal Protection Zones sheet in the SpaceMgmt.xls workbook defines zones in which personnel are required to wear personal protection equipment. There are no properties unique to the Personal Protection Zones sheet. For information on the required common properties, see Space Management Sheets (on page 13).

See Also Space Management Reference Data (on page 11) Hazardous Atmospheres Sheet (on page 14) Icarus Open Steel Zones Sheet (on page 18) Personal Protection Zones Sheet (on page 15) Pipe Attraction Zone Sheet (on page 18) Pipe Avoidance Zone Sheet (on page 16) Pipe Connection Zone Sheet (on page 19) Pipe Rack Zone Sheet (on page 16)


Space Management Sheets Security Zones Sheet (on page 15) Support Areas Sheet (on page 14)

Interference Volumes Sheet The Interference Volumes sheet in the SpaceMgmt.xls workbook specifies information about interference volumes. There are no properties unique to the Interference Volumes sheet. For information on the required common properties, see Space Management Sheets (on page 13).


Pipe Avoidance Zone Sheet The Pipe Avoidance Zone sheet in the SpaceMgmt.xls workbook defines zones that repel pipe. In addition to the common properties discussed in Space Management Sheets (on page 13), the following properties can be defined for a pipe avoidance zone: CostFactor - Type a factor that specifies the relative cost of routing pipe through the zone.


Pipe Rack Zone Sheet The Pipe Rack Zone sheet in the SpaceMgmt.xls workbook defines zones that contain pipe racks. In addition to the common properties discussed in Space Management Sheets (on page 13), the following properties can be defined for a pipe rack zone: CostFactor - Type a factor that specifies the relative cost of routing pipe through the zone.


Space Management Sheets OnFace - Type the code that represents on which face of the zone the routed pipe will lie. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook on the Route On Face sheet in the Codelist Number and Route On Face Short Description columns. Layout - Type the code that represents how the routed pipes are arranged on that face of the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook on the Route Layout sheet in the Codelist Number and Route Layout Short Description columns. RouteDirection - Type the code that represents the direction relative to the local coordinate system in which pipe will be routed. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook on the Route Direction sheet in the Codelist Number and Route Direction Short Description columns. SteelAnalysis - Type the structural steel analysis code for the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Descriptions and Codelist Number columns on the IcarusStructSteelAnalysis sheet. ColumnBaseOption - Type the code that represents the connection at the column base for the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Descriptions and Codelist Number columns on the IcarusColumnBaseOption sheet. GratingType - Type the code for the type of grating used for the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Descriptions and Codelist Number columns on the IcarusGratingType sheet. For example, 50 represents a 1/4 IN [5 MM] SS slipnot plate. PipeRackType - Type the code for the pipe rack type code for the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Description and Codelist Number columns on the IcarusPipeRackType sheet. ConcreteType - Type the code that represents the type of concrete used in the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Description and Codelist Number columns on the IcarusConcreteType sheet. For example, 10 represents Higher grade concrete (Type C). ThirdColumnOption - Type the code that represents whether or not a third row column is required for the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Description and Codelist Number columns on the IcarusThirdColumn sheet. EndBentExclusion - Type the code that represents whether or not to exclude end bents in the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Description and Codelist Number columns on the IcarusExcludeEndBent sheet.

See Also Space Management Sheets (on page 13) Space Management Reference Data (on page 11) Hazardous Atmospheres Sheet (on page 14) Icarus Open Steel Zones Sheet (on page 18) Personal Protection Zones Sheet (on page 15) Pipe Attraction Zone Sheet (on page 18) Pipe Avoidance Zone Sheet (on page 16) Pipe Connection Zone Sheet (on page 19) Pipe Rack Zone Sheet (on page 16) Security Zones Sheet (on page 15) Support Areas Sheet (on page 14)



Icarus Open Steel Zones Sheet The Icarus Open Steel Zones sheet in the SpaceMgmt.xls workbook specifies information about Icarus open steel zones in order to compute a cost based on Alias auto- routing. The properties that are defined on the Icarus Open Steel Zones sheet determine the properties that appear when you select Cost Estimation as the Category on the General tab of the Volume Properties dialog box. The values you type on the dialog box are used in the cost computation. In addition to the common properties discussed in Space Management Sheets (on page 13), the following are some of the properties that you can define in order to compute a cost based on Alias auto-routing: SteelAnalysis - Type the structural steel analysis code for the Icarus open steel zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Descriptions and Codelist Number columns on the IcarusStructSteelAnalysis sheet. ColumnBaseOption - Type the code that represents the connection at the column base for the Icarus open steel zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Descriptions and Codelist Number columns on the IcarusColumnBaseOption sheet. GratingType - Type the code for the type of grating used for the Icarus open steel zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Descriptions and Codelist Number columns on the IcarusGratingType sheet. For example, 50 represents a 1/4 IN [5 MM] SS slipnot plate.


Pipe Attraction Zone Sheet The Pipe Attraction Zone sheet in the SpaceMgmt.xls workbook defines zones that attract pipe. In addition to the common properties discussed in Space Management Sheets (on page 13), the following properties can be defined for a pipe attraction zone: CostFactor - Type a factor that specifies the relative cost of routing pipe through the zone. RouteDirection - Type the direction relative to the local coordinate system in which pipe will be routed. OnFace - Specify which face of the zone the routed pipe will lie on. Associated - Specify how the pipes are arranged on that face of the zone.

See Also Space Management Reference Data (on page 11) Hazardous Atmospheres Sheet (on page 14)


Space Management Sheets Icarus Open Steel Zones Sheet (on page 18) Personal Protection Zones Sheet (on page 15) Pipe Attraction Zone Sheet (on page 18) Pipe Avoidance Zone Sheet (on page 16) Pipe Connection Zone Sheet (on page 19) Pipe Rack Zone Sheet (on page 16) Security Zones Sheet (on page 15) Support Areas Sheet (on page 14)

Pipe Connection Zone Sheet The Pipe Connection Zone sheet in the SpaceMgmt.xls workbook defines zones that will have routed objects. A connection zone serves as a placeholder for route (pipe, cable, and so on) that has yet to be modeled. In addition to the common properties discussed in Space Management Sheets (on page 13), the following properties can be defined for a pipe attraction zone: Obstruction - Specify whether the zone allows routing through it (1) or whether the zone allows routing up to it, but not through it (0). ConnectionFace - Specify the side of the zone through which you want to route.


Space Group Sheet The Space Group sheet in the SpaceMgmt.xls workbook defines the hierarchy under the Space folder in the Catalog. In addition to the common properties discussed in Space Management Sheets (on page 13), the following properties can be defined for the space hierarchy:

This sheet substitutes for the ClassNodeType sheet that the other tasks have. ObjectName - Defines the object names of the first- and second-level folders. Name - Specifies the user interface names of the folders. These names appear in the Catalog task user interface. Code - Provides an alphanumeric code for the folders. Description - Provides a text description for the folders.

See Also Space Management Reference Data (on page 11)


S E C T I O N 3

1. Open the SpaceMgmt.xls workbook. 2. Select the Index sheet. 3. Select the sheet to which you want to add an area, zone, or interference volume. For

example, if you want to add a support area, select the Support Areas sheet. If you want to add a new class of areas, zones or interference volumes, you must add

a new sheet to the workbook and specify the class location in the Catalog hierarchy. For more information on adding part classes to the Catalog, see the Reference Data Guide available from the Help > Printable Guides command in the software.

4. Insert a new row in the Head/Start/End section. 5. Specify the properties for the area or zone that you are adding. 6. In column A of the new row, type the letter A to indicate the Bulkload utility to which you are

adding a new item. 7. Bulkload the workbook in the Add/Modify/Delete mode.

For more information on bulk loading the database with data, see the Reference Data Guide available from the Help > Printable Guides command in the software.

When you type a part number for the area in the PartNumber column, make sure that this number is unique across all parts in the catalog.

See Also Space Management Reference Data (on page 11)

Add an Area, Zone, or Interference Volume to the Catalog


Add an Area, Zone, or Interference Volume to the Catalog


A Add an Area, Zone, or Interference Volume

to the Catalog 21

D Documentation Comments 10 Documentation Set 7

H Hazardous Atmospheres Sheet 14

I Icarus Open Steel Zones Sheet 18 Interference Volumes Sheet 16

P Personal Protection Zones Sheet 15 Pipe Attraction Zone Sheet 18 Pipe Avoidance Zone Sheet 16 Pipe Connection Zone Sheet 19 Pipe Rack Zone Sheet 16 Preface 7

S Security Zones Sheet 15 Space Group Sheet 19 Space Management Reference Data 11 Space Management Sheets 13 Support Areas Sheet 14

Index


PrefaceDocumentation SetDocumentation CommentsWhats New in Space Management Reference Data

Space Management Reference DataSpace Management SheetsSupport Areas SheetHazardous Atmospheres SheetSecurity Zones SheetPersonal Protection Zones SheetInterference Volumes SheetPipe Avoidance Zone SheetPipe Rack Zone SheetIcarus Open Steel Zones SheetPipe Attraction Zone SheetPipe Connection Zone SheetSpace Group Sheet

Add an Area, Zone, or Interference Volume to the CatalogIndex

space mgmt reference data

Documents