sp-4 brochure back 1 - theatrelight.co.nz · sp-4 brochure back 1 author: rex subject: sp-4...

1
Your Local Distributor: TL-DMX-SP-4 These portable Theatrelight DMX splitters can be mounted anywhere- in a cabinet, wall mounted or tied to a lighting bar. The splitters present a very low load to the DMX line: up to 50 splitters can be paralled on a single DMX feed, ideal for very large LED displays. The internal circuitry re-shapes any slow edges in the incoming DMX signal and re- transmits the enhanced signal through low impedance, high current RS-485 transmitters. All input and output DMX lines are isolated from each other by 500 VAC tested insulation. For long-term reliability in noisy power conditions, no microprocessor is used in the signal path. The version is fitted with Neutrik 5 pin XLRs for compliance to the DMX standard. The is fitted with Neutrik 3 pin XLR for installations which use 3 pin as a standard. Both the 3 pin and 5 pin version can also be supplied on request with generic brand gold plated XLRs for installations where economy is important. SP4-5 SP4-3 Fully compliant with DMX-512 (1990) specification Input isolated from outputs to 500VAC LEDS for Power and DMX Input status LEDs for DMX status at each of the 4 outputs Compact mount-anywhere package Components and circuitry ensure long-term reliabilty Outputs are opto-isolated from each other to 500VAC 3 pin or 5 pin XLR versions in Neutrik or economic generic brands Features Signal RS-485 to 1 MBaud, DMX (1990) compatible lack epoxy powder-coated Power: Construction Mains supply 220-240 VAC 50/60Hz, 5 watts (100-120 VAC 50/60Hz to special order) Manisn cable 1 meter 3 core fitted with Aust/NZ 3 pin plug, or tinned ends, or to special order 1.5mm zinc coated steel construction, b Specifications Weight: 1.4Kg Packed Weight: 1.6Kg Packed dimemsions: 350mm x 200mm x 160mm Packed Volume: 0.012m 3 4 way Compact DMX splitters Theatrelight NZ, 6 Rowe St. Onehunga, Auckland, New Zealand Tel: 64-9-622 1187, Fax: 64-9-636 5803 www.theatrelight.co.nz [email protected] 360 54 54 Power supply: 220-250VAC, 50/60Hz, 5W TL-DMX-SP4 Isolated DMX512 Splitter Power 1 2 3 4 In Out DMX Input Dimensions

Upload: others

Post on 14-Aug-2020

6 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: SP-4 Brochure back 1 - theatrelight.co.nz · SP-4 Brochure back 1 Author: Rex Subject: SP-4 Brochure back 1 Keywords: SP-4 Brochure back 1 Created Date: 20150618110258

Your Local Distributor:

TL-DMX-SP-4

These portable Theatrelight DMX splitters canbe mounted anywhere- in a cabinet, wallmounted or tied to a lighting bar.

The splitters present a very low load to theDMX line: up to 50 splitters can be paralled ona single DMX feed, ideal for very large LEDdisplays. The internal circuitry re-shapes anyslow edges in the incoming DMX signal and re-transmits the enhanced signal through lowimpedance, high current RS-485 transmitters.

All input and output DMX lines are isolated fromeach other by 500 VAC tested insulation.

For long-term reliability in noisy powerconditions, no microprocessor is used in thesignal path.

The version is fitted with Neutrik 5 pinXLRs for compliance to the DMX standard. The

is fitted with Neutrik 3 pin XLR forinstallations which use 3 pin as a standard.

Both the 3 pin and 5 pin version can also besupplied on request with generic brand goldplated XLRs for installations where economy isimportant.

SP4-5

SP4-3

Fully compliant with DMX-512 (1990)specification

Input isolated from outputs to 500VAC

LEDS for Power and DMX Input status

LEDs for DMX status at each of the 4 outputs

Compact mount-anywhere package

Components and circuitry ensure long-termreliabilty

Outputs are opto-isolated from each other to500VAC

3 pin or 5 pin XLR versions in Neutrik oreconomic generic brands

Features

Signal

RS-485 to 1 MBaud, DMX (1990) compatible

lack epoxy

powder-coated

Power:

Construction

Mains supply 220-240 VAC 50/60Hz, 5 watts

(100-120 VAC 50/60Hz to special order)

Manisn cable 1 meter 3 core fitted with Aust/NZ 3 pinplug, or tinned ends, or to special order

1.5mm zinc coated steel construction, b

Specifications

Weight: 1.4KgPacked Weight: 1.6KgPacked dimemsions:350mm x 200mm x 160mmPacked Volume: 0.012m3

4 way Compact DMX splitters

Theatrelight NZ, 6 Rowe St. Onehunga, Auckland, New ZealandTel: 64-9-622 1187, Fax: 64-9-636 5803

www.theatrelight.co.nz [email protected]

360

54

54

Power supply: 220-250VAC, 50/60Hz, 5W

TL-DMX-SP4 Isolated DMX512 Splitter

Power

1 2 3 4 In Out

DMX Input

Dimensions