Solutions For Energy StorageATEPS is based around a number of core tech-nologies that all focus on the preservation and storage of energy.

We have developed unique solutions for peak-shaving, energy storage and fuel saving for CHP’s that can be delivered quickly and starts saving your ener-gy cost energy cost almost instantly.

In many cases these installations can be offered including financing and do not need any capital investments on your side. Therefore these solution are risk-free for any user; risk free both financially and technically since any changes to your exist-ing application can be undone in a matter of minutes should you desire to do so.

Our service devision keeps an eye on all the units and service and optimization can often be done without user interference.

HSB01-UK. Rev. 4

ATEPS

ATEPS Nederland BV Advanced Technologies for Energy & Power Systems

19” Lithium batteryATEPS Netherlands BV has developed a 19” battery with a height of 2U, which can be used in many applications. Due to the universal design of the battery it can easily be integrated into existing installations such as:

• Energy Storage System• Backup in ICT systems• Emergency power supply for telecommu-

nication systems The batteries are interconnected via the back-plane so there are no voltage-carrying parts on the front of the battery, an important safety feature.

For applications where the voltage should be available to the front, this can be achieved by means of a 1U high connection-unit.

Depending on the backplanes used, the bat-teries can be connected in series or parallel or a combination of these whereby a maximum of 16 modules can be inserted in tot rack. Thereby systems with different voltages and capacities can be easily configured.

A 19” BMU is available for integration in the same cabinet that controls all batteries in this rack. The BMU communicates to external devic-es via RS485 or the ATEPS Energy Management System that also controls the converters in ESS applications.

An SD card can be inserted in the BMS to update firmware in the batteries and can be used to log battery data for later analyses of the battery parameters.

Each cell individually fused

19” batteries

Batteries in 19” racks

ESS Application

ESS Project Planning

Important at the outset of any ESS project is a clear understanding of the current opera-tional cost and the cost of ownership. Using advanced analytical tools, a prediction on obtainable cost savings are made that will form the basis for the Return on Investment calcula-tions.

The ESS system can be combined with differ-ent solar installations, wind generators or in combination with fuel cells and the creation of hydrogen.

Depeding on the size of the ESS, installation is done using an exter-nal power-house or as a single or small row of cabinets. Installation is simple and will be han-dled by qualified Ateps engineers in a mater of hours or days.

Service, updates and frequent reporting is part of the system so the ESS application will hardly be noticed other than in your monthly energy bills!

More information:

ATEPS Nederland BVPanovenweg 34 5708 HR HelmondThe Netherlands

Tel: +31 (0)492 - 792707www.ateps.cominfo@ateps.com

ATEPS

Specifications

Type AB5050

Nominal voltage 50V

Capacity 50Ah

Technologies Li-NiMnCoO2

Dimensions 19” x 2U x 550mm

Weight 23kg

BMU External - 4U

Nom. discharge current 50A

Max. discharge current 100A standard - 200A in special cabinet

Nom. Charge current 25A

Max. Charge current 50A standard - 100A in special cabinet

Integrated sensors 14 x Voltage, Current, 7 x Temperature

Communication RS485 with secure protocol

Temp. range in use 0°C to +45°C

Temp. range storage -10°C to +55°C

System Vmax 1050V (42U cabinet, batteries connected in series)

System Ah max. 1050Ah (42U cabinet, batteries connected in parallel)

Diagnostics 3-color LED

Service USB Cell voltage, temperatures, current

SafetyPacks designed for 1500V and in accordance

with, UN 3480, UN 38.3 and UL2054

BMSSmart BMS with automatic battery ID distribution

and communication to EMS