solution manager 7.1 firsts configurations
TRANSCRIPT
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 1/801
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 2/802
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 3/803
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 4/804
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 5/80
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 6/80
If the Solution “SAP Solution” already exists, this step is deactivated.
6
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 7/807
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 8/80
It is highly recommended to use the standard SAP Solution Manager BW
environment which sets up the BW in the same client as SAP Solution
Manager.
If you do not use client 001 as Solution Manager client make sure you set
the BW client in table RSADMINA to the current Solution Manager client.This is done using the function module RS_MANDT_UNIQUE_SET. To
check f the client was set successfully please check the field BWMANDT
in table RSADMINA. The BW can only be activated in this client!
If you use another BW systems as SAP Solution Manager BW system,
please ensure that the software components BI_CONT and ST-BCO are
always on exact the same level as Solution Manager’s. Do never mix up
your business BW with the SAP Solution Manager BW.
8
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 9/809
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 10/80
In this step users are created for the further Basic Configuration. The
users are created in Solution Manager and if a separate BW is used in
the BW as well. The column “System” tells you in which system the user
is created.
The following users are created: The user SAPSUPPORT is the support user for E2E tools. Instead of creating the
default users and generating password you can also specify password or specify
an existing user and password. It is recommended to specify the password for the
user SAPSUPPORT.
The SMD_RFC user is user for RFC communication between the ABAP and Java
stack of SAP Solution Manager.
The user CONTENTSERV is the user for HTTP services like Webdynpro and BSP.
The SM_EFWK starts the program E2E_EFWK_RESOURCE_MGR in the
background job EFWK RESOURCE MANAGER. The program starts the ExtractorFramework.
The SMD_BI_RFC user is created in the BW client of your SAP Solution Manager
system and used in the same way than the SMD_RFC user in your productive
client.
The user BI_CALLBACK is created in the SAP Solution Manager client.
BI_CALLBACK is used only if the BW is on a different client or system and if the
BW needs to read data from the Solution Manager client.
The user SM_BW_<SID> is created in the BW system and is used by the RFC
10
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 11/80
connection BWSM_<BI_SID>CLNT<BI client>. The RFC connection is a read
connection to the BW system, via which the Solution Manager system reads data
from the extractors in BW, for example for ESR and Monitoring and Alerting.
The SM_BW_ACT is created in the BW system, it is used to activate BI content for
individual scenarios such as Incident Management, Data Volume Management, or
ESR in transaction SOLMAN_SETUP.
The SAPSERVICE user is used by SAP Active Global Support to deliver remote
and on-site services.
The ES_REP_<SID> user is the ES-Reporting user. It allows ES-Reporting for ad-
hoc reports, scheduling of reports, and chapter/subchapter selection as well as
variant choice.
The SM_AMSC user is the user used to rune the Automatic Managed System
Configuration in background
SAPSERVICE and ES_REP_<SID> are created with an initial password
that has to be changed at the first log on. Please change the passwordfor those users immediately and use the “Provide Existing User”
functionality to register the users with the productive password here.
11
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 12/8012
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 13/8013
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 14/80
In this step, you connect existing CA Wily Introscope Enterprise Managers to SAPSolution Manager. This data is required for Solution Manager Diagnostics to analyzethe status of Java systems, e.g. performance data and to enable SAP SolutionManager to alert on errors in the Java system.You can install additional CA Wily Introscope Enterprise Managers, if the capacity of
existing ones would be exceeded.The Wily Introscope Enterprise Manager has to be installed on operating system levelof SAP Solution Manager or on a separate host, before it can be added here.The Enterprise Manager (EM) acts as the central repository for all Introscopeperformance data and metrics collected in an application environment. The EnterpriseManager processes performance data and makes it available to users for monitoringand diagnosis.CA and SAP have an agreement allowing customers to use Introscope with SAP-developed dashboards and instrumentation as part of SAP Solution Manager. If youwould like to increase the benefits of Introscope through custom dashboards andinstrumentation, or extend Introscope's capabilities with Introscope Powerpacks,those services and products are available from CA's Wily Technology Division.The Enterprise Manager should always run on the system, therefore please ensurethat the server comes up again if you restart your server.The Wily Introscope installation guide can be found underhttp://service.sap.com/instguides → S → SAP Solution Manager → Release 7.1 →Installation … → Wily Introscope Setup Guide 9.0
14
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 15/8015
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 16/80
Refer to the activity documentation of the single activities to find detailed
information on how to perform the activity. The activity documentation
can be accessed via the link Display in the column Documentation.
16
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 17/8017
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 18/8018
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 19/80
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 20/8020
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 21/8021
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 22/8022
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 23/80
In this step you start a job that performs several automatic activities in
your Solution Manager system. If an activity fails please refer to the log
to find out more about the error and how to fix it.
If you cannot carry out an activity automatically, please refer to the
activity documentation on how to perform the activity manually.The following issues are observed at customers regularly and should be
noticed here briefly: Make sure your client is not set to client role “Production” in transaction SCC4,
since this makes it impossible to import piece lists
Make sure the BW activation was finished successfully before activating any
content. This can be done using transaction RSTCO_ADMIN in the BW client. If it
failed feel free to rerun it directly from there. The BI_TCO_ACTIVATION job usually
needs around 1000 seconds in a new installation.
Several different content areas are activated in this step. Nevertheless you canonly run one CCMS_BI_SETUP job at one time in an BW system. If a BW content
related activity fails, wait until the currently active CCMS_BI_SETUP job finished
and rerun the activity (via “Execute Selected”). Always check the job log of the
CCMS_BI_SETUP jobs, since they tend to finish successfully, despite errors in the
job log.
23
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 24/8024
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 25/8025
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 26/8026
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 27/80
Optional Step
In this step you can maintain users that are used in the further
configuration for the different SAP Solution Manager scenarios (e.g.
ChaRM, BPMon etc.). The users are created with the authorizations
necessary to successfully perform the scenario configuration.
27
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 28/8028
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 29/8029
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 30/80
If you miss a managed system make sure it is visible in LMDB. If it is not
visible in LMDB please connect the system to the SLD to automatically
create it in LMDB.
Please allow some time for the system to show up here, since it has to
be replicated to this view, via the landscape browser.
30
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 31/8031
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 32/8032
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 33/8033
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 34/8034
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 35/8035
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 36/8036
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 37/80
The right product version is very important for the setup of Root Cause
Analysis. If you select only a product versions for a system as
“diagnostics relevant” that are not supported you will not be able to finish
the managed system setup successfully. Please make sure that at least
one product version selected as “diagnostics relevant” is supported as ofSAP note 1478974.
37
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 38/8038
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 39/8039
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 40/8040
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 41/80
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 42/8042
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 43/80
The following RFC destinations can be created: READ Destination: on Solution Manager to read system data from managed
system to enable basic SAP Solution Manager functions
TMW Destination: on Solution Manager, will be used for the Change Request
Management (ChaRM) functionality. You only need to create this one if you plan touse ChaRM.
RFC Destination for Solution Manager : TRUSTED or LOGIN RFC Destination
to jump to satellite system for analysis purposes. If a TRUSTED RFC destination is
created, also a TRUSTED RFC destination from the managed system to SAP
Solution Manager is created
BACK Destination: on managed system to send data to Solution Manager (for
EWA data, Service Desk messages)
43
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 44/8044
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 45/8045
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 46/8046
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 47/80
Make sure that you assign an appropriate Diagnostics agent for every
single instance listed in the table. If you don’t assign an agent, you will
loose of monitoring functionality for the affected instance.
You can use the button “Check Host Agents” to check the SAP Hostagent
installed in the host of the Diagnostics agent. In case of a problem withthe SAP Hostagent an error message will be shown in the log area.
Remark: If you want to use diagnostics agents that are created by an
diagnostics agent as agents on-the-fly, please be aware that you have to
set up and activate agents on-the-fly for the physical/virtual host the SAP
systems logical host is running on, before the managed system setup.
For the setup procedure please refer to the appendix of this document.
47
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 48/80
Remark: If you have activated the diagnostics agents on-the-fly for themanaged Java system, make sure to check the checkbox “Deploy Byte CodeAdapter under Managed System Instance(s)” and provide a deploymentpath for Introscope BC Adapter.
Without this checkbox the BC adapter is deployed inside the folder structure ofthe diagnostics agent.Example:D:\usr\sap\D7B\SMDA78\SMDAgent\applications.config\com.sap.smd.agent.application.wily\BytecodeAgent\ISAGENT.9.1.0.0-2011-12-14
As the agents on-the-fly do not fail-over with the Java stack, but are createdon the new physical or virtual host after the switch, the BC adapter will get lostduring a fail-over. To avoid this you can either deploy it in the folder structureof the Java stack or to a designated folder that has to be included in the fail-over switch.
If the value set is an absolute path like “/wily” the result of the deployment be:/wily/SD7/JC00/BytecodeAgent/ISAGENT.9.1.0.0-2011-12-14
If the value set is a relative path like “wily” the result of the deployment pathwill be:/usr/sap/SD7/JC00/wily/BytecodeAgent/ISAGENT.9.1.0.0-2011-12-14
48
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 49/8049
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 50/80
In this step you create users in the managed system, to enable the
Diagnostics agent to gather data and to provide a user for SAP Support.
The following users are created: SAPSUPPORT: The user SAPSUPPORT enables Active Global Support to
support in the managed system. The user can only read data. Enter the passwordmanually.
SMDAGENT_<SID>: The SMDAGENT_<SID> user is used by the Wily Host
Agent Application on the Diagnostics Agent to connect to managed systems of
type ABAP for data retrieval.
SMCOLL_<SID>: The SMCOLL_<SID> user is used by the Wily Host Agent
Application on the Diagnostics Agent to connect to managed systems of type Java
for data retrieval.
Remark: If you don’t see any users, please check if your logon user inSolution Manager (the one running the MSC) has authorizations for user
maintenance in Solution Manager, with SP12 a new authorization check
is introduced that requires this authorization also for the maintenance of
managed system users
50
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 51/8051
In this step you start a job that performs several automatic activities in
the managed system. If an activity fails please refer to the log to find out
more about the error and how to fix it.
If you cannot carry out an activity automatically, please refer to the
activity documentation on how to perform the activity manually.
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 52/8052
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 53/8053
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 54/8054
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 55/8055
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 56/8056
After finishing the managed system setup for your system make
sure that you add it to a Solution, to activate Early Watch alerts!
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 57/8057
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 58/80
1 For the diagnostics agent installed on the physical/virtual SAP
recommends to use a freshly installed Diagnostics Agent. It is not
recommendable to try to re-use older/former existing agents for the
agents on-the-fly setup.2 This will help you to determine where the agents on-the-fly are currentlylocated (on which physical/virtual host they are currently running) In the Agent Admin UI the on-the-fly agents are identified by
<SID>/<Instance>/<logical host name> so to identify on which physical host an
agent on-the-fly is currently running, it is recommendable to use different SIDs or
instance numbers for all agents participating in one switch-over group (the group
of physical hosts between which one managed component can switch)
Example:
58
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 59/8059
Host type:
P = physical
V = virtual
L = logical
U = unknown (you may want to check the SAP Hostagent for this host)
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 60/8060
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 61/80
The field to exclude host names accepts regular expressions. This
means if you want to exclude e.g. all hosts starting with abc* and xyz*
you have to enter the following in the field “Hosts”: abc.*,xyz.*
61
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 62/8062
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 63/8063
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 64/8064
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 65/8065
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 66/8066
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 67/8067
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 68/8068
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 69/8069
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 70/8070
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 71/8071
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 72/8072
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 73/8073
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 74/8074
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 75/8075
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 76/8076
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 77/8077
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 78/8078
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 79/8079
8/17/2019 Solution Manager 7.1 Firsts Configurations
http://slidepdf.com/reader/full/solution-manager-71-firsts-configurations 80/80