solidworks simulation nonlinear outline · of solidworks simulation premium nonlinear module. the...
TRANSCRIPT
Pentagon Solutions Ltd, Belfast O�ce: Suite 3 Teal Pavilion, 189 Airport Road West, Belfast, BT3 9ED. t: +44 28 90 455 355 f: +44 28 90 456 355Cork O�ce: Unit 301, Harbour Point Business Park, Little Island, Cork, Ireland. t: +353 21 4232242
London O�ce: 3 The Drive, Jubilee House, Great Warley, Brentwood, CM13 3FR Tel: +44 (0)1268 772821
SolidWorks Simulation Premium: NonlinearGain credibility and get ahead with our SolidWorks Training & Certi�cation
Duration: 2 Days
Prerequisites:
Must have attended the basic SOLIDWORKS Simulation class, or must have an experience with SOLIDWORKS
and working basic knowledge of �nite elements and of basic mechanical principles.
Designed for users who would like to become productive fast, the nonlinear course o�ers hands-on
experience on the use of SOLIDWORKS Simulation nonlinear module. The two-day course provides an overview
on a wide range of nonlinear structural/mechanical analysis topics.
Course Outline
This class will raise your SOLIDWORKS Simulation FEA skills to the next level! It o�ers hands-on experience on the use
of SOLIDWORKS Simulation Premium nonlinear module. The 2-day course provides an overview on a wide range of
nonlinear structural/mechanical analysis topics. You will learn how to deal with models that exhibit large displace-
ments and/or yielding, discuss and practice the use of many material models available in SOLIDWORKS Simulation and,
most importantly, how to drive a non-linear analysis to successful completion. ctual service conditions.
The main topics covered include:
Please do not hesitate to contact us for registration and further information
e: [email protected] | t: +44 28 90455 355
Lesson 1: Geometric Nonlinearities
Large displacements problemsLarge strain formulation
Lesson 2: Material Nonlinearities
Nonlinear elasticityHyperelasticity (Mooney-Rivlin, Ogden)Plasticity (von Mises, isotropic/kinematic/mixed hardening rules)Temperature dependent material propertiesVisco-elasticity and creep
Lesson 3: Contact (Boundary) Nonlinearities
3D nonlinear gap/contact analysis (with or without material nonlinearities).
Lesson 4: Numerical Procedures
Solution control techniques (force, displacement, and Arc-Length controls)Equilibrium Iterations schemes (Newton-Raphson, modi�ed Newton-Raphson)Termination schemes (convergence and divergence criteria)
Lesson 4: Special Topics
Adaptive automatic stepping algorithmPrescribed non-zero displacements associated with time curvesDeformation dependent loadingAnalysis stabilization techniques
Lesson 5: Viewing the Results
De�ected shape plotsDisplacement and stress color �lled contour plotsAnimation of de�ected shape, displacement, and stress contour plotsX-Y plots for response quantities Isoplanes and sectioning