SOLAR-WIND HYBRID

POWER SYSTEMGuided By

Asst. Prof Smita Jana

Presented BySoumya Swaraj Moharana

120301ELR036

2

Introduction Objective Pollution from power plant Model Video Design stages Resource analysis Various applications Major benefit

CONTENT

3

Today, the world is progressing at quite a fast rate with the use of conventional sources of energy. The two major disadvantages of using them are the environmental pollution created by its use & its limited quantity . So it’s the time to think for switching on the Non-conventional sources .

INTRODUCTION

4

To generate continuous power from wind and solar energy. (day and night)

To use VAWT instead of HAWT Design and manufacture a Prototype model

Objective

5

POLLUTION FROM POWER PLANTS

6

7

SCHEMATIC DIAGRAM

8

DESIGN

Edith Cowan University 9

10

11

FINAL DESIGN

12

Solar-wind hybrid power system

13

CHEAP Maintenance, No gear mechanism Bird and bat friendly Quiet in operation VAWT catches wind more efficiently, does not need to

be as tall. Easier to permit in residential neighborhoods.

Small profile Low height required More reliable Less expensive than HAWT (approx. 45%)

Advantages of VAWT over HAWT

Applications

15

ROAD LIGHTING

16House lighting

17LANDSCAPE LIGHTING

Edith Cowan University 18

PUMP IRRIGATION

19

Telecommunication System

Edith Cowan University 20

FISHING BOAT

21

YACHT

22Various monitoring systems

Edith Cowan University 23

RURAL AREA

Technical details and

data

SOLAR – WIND HYBRID POWER SYSTEMSTART WIND SPEED

5.6 Km/h

Rated wind speed

36 km/h

Rated voltage 12vRated power 200wWind turbine material

Galvanized iron

No. of wings 8Fan diameter 60cmSafe wind speed 50 km/hWeight 25kg

25

Solar-wind energy is a clean, pollution free and renewable source of energy. If we implement this project in our practical life then we can reduce electricity bills, for study purpose of our students & by this technology we can take care of our environment.

CONCLUSION

26

Thank you