solar mounting systems - schletter group components brochure.pdf · high quality aluminum; for easy...

Component OverviewOctober 2016

SchletterSolar Mounting Systems

2|

Design, order, and purchase systems on-line!Ideally suited for projects of 50 kW or smaller in size, PV Powersite offers system configuration for Schletter's Standard Flush Mount, Windsafe (for flat and penetrating roofs), PvMini and PvMax forballasted ground mount, and the aluminum FS System for single post ground mount installations.PV Powersite makes ordering convenient and fast while providing a permit-ready package which includes:• Structural acceptance letter• System drawings• Parts list

To order, select a system from the PV Powersite home page at www.pvpowersite.com, input project data, click add to basket, and be transferred to Schletter Secure for convenient on-line ordering. A log in is required to store. Contact a Schletter sales representative for more information or assistance at 1-888-608-0234.

|3

Table of Contentscomponents overview

Roof Attachments 5

Tile 6Asphalt Shingle 8Corrugated and Trapezoidal Sheet Metal 10Standing Seam 12Attachment Accessories 13

Module Clamps 15

Framed Modules 16Laminate Modules and Accessories 18

Rails and Accessories 21

Standard Rails 22Cable Management and Accessories 28Grounding Jumpers 30

System Related Components 33

Roof System Components 34FS System™ Components 36FS Uno™ and FS Duo™ Components 37

Hardware 39

Screws and Bolts 40Washers and Nuts 42

|5

Roof AttachmentsTile and Asphalt Shingle

Corrugated and Trapezoidal Sheet Metal

Standing Seam

Attachment Accessories

Roof Hooks Flashed SolutionsStandoff

FixT™Fix2000™VarioFix-V™

503S-5!®

6|

Tileroof attachments

Roof Hook Overview

All roof hooks are made of high quality stainless steel; hardware sold separately. Roof hooks sold in bulk package as indicated below.

ab c

e

d

f

g material thickness

a b c d e f g mm 28 126 126-145 76 150 32 5

inches 1.1 4.96 4.96-5.71 3 5.9 1.26 0.2

a b c d e f g mm 28 115 130 76 150 32 5

inches 1.1 4.53 5.12 3 5.9 1.26 0.2

a b c d e f g mm 34 97 143-164 76 150 32 6

inches 1.34 3.82 5.6-6.5 3 5.9 1.26 0.24

100009-002 Eco SV Roof HookPackage size: 25 pieces

100015-000 Eco S-130 Roof HookPackage size: 25 pieces

100002-005 Eco G-35 Roof HookPackage size: 25 pieces

100009-003 Eco SV Roof Hook with KlickTopPackage size: 25 pieces

100015-001 Eco S-130 Roof Hook with KlickTopPackage size: 25 pieces

100002-006 Eco G-35 Roof Hook with Rapid2+ (pictured)Package size: 25 pieces

Used on S-shaped tile roofs

|7

a b c d e f g mm 28 120 162 76 150 32 6

inches 1.1 4.72 6.39 3 5.9 1.26 0.24

a b c d e f mm 45 137 128 67 32 6

inches 1.77 5.39 5.04 2.64 1.26 0.24

a b c d e f mm 35 107 119-141 97 32 6

inches 1.38 4.2 4.7-5.6 3.82 1.26 0.24

101005-002 Rapid2+ Max Roof HookPackage size: 25 pieces

103001-006 Plain Tile Roof HookPackage size: 25 pieces

103001-008 Plain Tile Roof Hook VerticalPackage size: 25 pieces

103001-007 Plain Tile Roof Hook with KlickTopPackage size: 25 pieces

103001-009 Plain Tile Roof Hook Vertical with Rapid2+ (pictured)Package size: 25 pieces

e

d

f

g material thicknessa

b c

adjustable

a

b c

d

e

f material thickness

Used on S-shaped tile roofs

Used on flat tile roofs

8|

Quick Mount PV®

12 in. square aluminum flashing protects against leaks.

Asphalt Shingleroof attachments

187000-000 Quick Mount PV KitStainless steel hardware includedPackage size: 12 kits

187000-010 Quick Mount PV Kit w/ KlickTop HBFor easy integration with Schletter railsPackage size: 12 kits

length height width thickness mm 220 43-72 32 6

inches 8.66 1.69-2.84 1.26 0.24

length height width thickness mm 220 80 32 8

inches 8.66 3.15 1.26 0.32

101007-000 Rapid2+ Asphalt Shingle Roof HookPackage size: 25 pieces

000008-680 Asphalt Shingle Roof Hook — VerticalPackage size: 25 pieces

Used on asphalt shingle roofs

EJOT®

12" x 8" x 0.04" aluminum flashing protects against leaks. Designed for THREE TAB strip asphalt shingle roofs.

979001-234 EJOT FlashingFlashing only, hardware not included.Package size: 12

979001-235 EJOT Flashing kit with Gator ClampPackage size: 12 kits

979001-236 EJOT Drilling kitKit good for up to 500 flashingsPackage size: 2

|9

Standoff

High quality aluminum mounting standoff with steel thread bolts (M10 x 1” long) and flange nut.

Square base 90 mm / 3.54”. Variety of heights available.

Asphalt Shingle and Compositeroof attachments

188002-104 4” Standoff with Flange Nut (102 mm)Package size: 20





188003-004 4” Standoff KlickTop HB KitPackage size: 20 kits





189001-001 Oatey FlashingNo hardware included.Package size: 12

10|

Corrugated and Trapezoidal Sheet Metalroof attachments

FixT™, Universal

High quality aluminum; for use on corrugated and trapezoidal sheet metal roofs; good for high wind and snow loads; hardware sold separately.

FixT Accessories

119000-00381 FixTUniversal design with multiple roof attachment holes pre-drilled for ease-of-installationPackage size: 20

973000-016 EPDM Sealing WasherPackage size: 100 pieces

142500-013 SpacerStandard length: 81 mm

w h l mm 136 35 381

inches 5.35 1.38 15

h

w

943718-064 Screw 8x67 min. 1.5 mm self-tap with washer A2Package size: 25

943718-100 Screw 8x100 min. 1.5 mm self-tap with washer A2Package size: 25

|11

Fix2000™

High quality stainless steel; the universal trapezoidal sheet metal attachment for steel sheets 26 gauge or thicker.

Single VarioFix-V™

Trapezoidal Sheet Metalroof attachments

113002-011 Fix2000 with KlickTop and PVC Foam InsertDesigned with glued in PVC foam insert for water sealing(manufacturer recommended)Package size: 200 kits

113001-021 Fix2000 Standard Kit and PVC Foam InsertDesigned with glued in PVC foam insert for water sealing(manufacturer recommended)Package size: 200 kits

113009-102 SingleFix-V Kit, 144 x 36 mmVarioFix-V with PVC foam tape and self-drilling screws (943000-710)Package size: 75 kits

12|

S-5!®

For use with most types of standing seam roofs.

112011-000 S-5-T MiniFor “T” shaped seam profilesPackage size: 70 pieces

112011-001 S-5-U MiniFor vertical seams and for horizontal 2” seam profilesPackage size: 50 pieces

112011-002 S-5-Z MiniFor wide, rounded seam profilesPackage size: 68 pieces

112011-003 S-5-E MiniFor double-folded seem profilesPackage size: 90 pieces

112011-011 S-5-UManufacturer recommended solution for vertical seams and for horizontal 2” seam profilesPackage size: 30 pieces

112011-100 S-5-T Mini KlickTop KitFor easy integration with Schletter railsPackage size: 70 pieces

112011-101 S-5-U Mini KlickTop KitPackage size: 50 pieces

112011-102 S-5-Z Mini KlickTop KitPackage size: 68 pieces

112011-103 S-5-E Mini KlickTop KitPackage size: 90 pieces

112011-110 S-5-U KlickTop HB KitFor easy integration with Schletter railsPackage size: 30 pieces

112011-111 S-5-U Rapid2+™ Angle KitFor easy, elevated integration with Schletter railsPackage size: 30 pieces

Standing Seamroof attachments

S-5-E Mini KlickTop Kit

S-5-U KlickTop HB Kit

|13

Roof Attachment Accessories

High quality aluminum; for easy connection of roof attachments to Schletter module-bearing rails. All attachment accessories are made of high quality aluminum.

109008-000 KlickTop™ Roof Hook Attachment KitIncludes hardwarePackage size: 25 kits

109008-001 Rapid2+™ Terminal Clamp KitIncludes hardwarePackage sizes: 25 kits

43 KlickTop Flat Partial AssemblyHardware sold separatelyPackage size: 40 pieces

119026-003 Rapid2+ Angle, M8 ConnectionHardware sold separatelyPackage size: 40 pieces

119026-002 Rapid2+ Angle, M10 ConnectionHardware sold separatelyPackage size: 40 pieces

119001-001 KlickTop HB™ (Gator Clamp)Hardware sold separatelyPackage size: 20 pieces

Attachment Accessoriesroof attachments

Technical Data (for Schletter components)

Material Hardware: Stainless steel, grade 304Aluminum components: Aluminum alloys 6063, 6105Sheet metal components: Stainless steel, grade 304PVC Foam: UV resistant rubber

Structural Analysis

Structural calculations are according to the current specific national standards (IBC 2006,2009, or 2012 and/or NBC of Canada). Determination of number of attachments and locations is based on structural analysis and verified by tensile tests in a laboratory.

Always consider structural safety. The check of the roof capacity and its connection substructure is not included in the general structural analysis of attachments. The appropriate calculations and checks should be performed to ensure roof and substructure can accommodate the weight of the system in addition to snow and wind loads. Also consider increased loads in roof edge and corner zones.

In cases where roof attachment is connecting to roof cladding rather than directly to the substructure, verification of the connection forces of the roof cladding to the substructure is not part of the design and must be verified by the owner/installer.

|15

Module ClampsFramed Modules

Laminate Modules

Accessories

Rapid5K™ Module Clamps (Aluminum Systems)Rapid2+™ Adjustable End ClampFS Uno™/FS Duo™ Rapid5K Module Clamps (Steel Systems)

Eco Series™Eco6-S4™ for First Solar FS Series 4

16|

Framed Modulesmodule clamps

Rapid5K™ Clamps

Rapid5K, high quality aluminum end and middle clamps for rails using an 8 mm top channel, Schletter also offers a convenient Rapid2+ adjustable end clamp. Both clamps are used with all aluminum solar mounting systems offered by Schletter. Rapid5K clamp meet UL 2703 Ed. 1 standards, tested with specific modules.1

For Modules Mounted in LandscapePackaged sizes: 25 or 125 pieces, aluminum

Black anodized clamps packaged in 125 or 250 pieces, contact sales representative for more information

For Modules Mounted in PortraitPackaged sizes: 25 or 125 pieces, aluminum

Black anodized clamps packaged in 125 or 250 pieces, contact sales representative for more information

Frame Height

Adjustable End Clamp

Grounding End Clamp

Grounding Middle Clamp

mm

30–39 131002-000 135002-005

40–50 131002-001 135002-006

31 135007-131

33 135007-133

35 135007-135

40 135007-140

45 135007-145

46 135007-146

50 135007-150

Frame Height

Adjustable End Clamp

Grounding End Clamp

Grounding Middle Clamp

mm

30–39 131011-000 135011-005

40–50 131011-001 135011-006

31 135013-131

33 135013-133

35 135013-135

40 135013-140

45 135013-145

46 135013-146

50 135013-150

1 See Schletter system installation manuals for complete UL 2703 Ed. 1 guidelines and approved modules.

|17

Frame Height

FS Uno Rapid5KEnd Clamp (Right)

FS Uno Rapid5KEnd Clamp (Left)

Frame Height

FS Uno/Duo Rapid5K Middle Clamp

mm mm

31 144921-031 144920-031 30–32 144914-008

33 144921-033 144920-033 33–37 144914-009

35 144921-035 144920-035 38–42 144914-010

40 144921-040 144920-040 43–47 144914-011

45 144921-045 144920-045 48–50 144914-012

46 144921-046 144920-046

50 144920-050 144920-050

FS Uno Rapid5K™ Module Clamps

Designed and pre-assembled specifically for the FS Uno™ and FS Duo™ systems only, will not connect to Schletter aluminum systems. Conforms UL 2703 Ed. 1 with approved modules. See system mounting instructions for more information.

For Modules Mounted in PortraitPackaged sizes: 25 or 125 pieces

18|

Laminate Modules and Accessoriesmodule clamps

Eco Series™ Laminate Clamps

11 mm / 0.43” engagement length into the module, the gap between the modules measures between 20 and 30 mm / 0.79"–0.91" (no pressure onto the laminates). Eco6-S4 is compatible with First Solar FS Series 4 modules.

When tightening bolts, use the recommended torque.

133260-268 Middle Clamp Eco6 Laminate 6.8 mm KitIncludes hardware (M8 x 20)Package size: 44 pieces

133160-268 End Clamp Eco6 Laminate 6.8 mm KitIncludes hardware (M8 x 20)Package size: 18 pieces

133280-280 Middle Clamp Eco8 Laminate 8 mm KitIncludes hardware (M8 x 20)Package size: 44 pieces

133180-280 End Clamp Eco8 Laminate 8 mm KitIncludes hardware (M8 x 20)Package size: 18 pieces

133280-280 Middle Clamp Eco6-S4 Laminate 6.8 mm KitIncludes hardware (M8 x 20)Package size: 44 pieces

133180-280 End Clamp Eco6-S4 Laminate 6.8 mm KitIncludes hardware (M8 x 20)Package size: 18 pieces

|19

Eco Series Clamp Accessories

139008-004 Safety Hook for Laminate Thickness 6.8 mm / 0.26”Prevents the modules from sliding when mounted in portrait orientationPackage Size: 30 pieces

139008-003 Safety Hook for Laminate Thickness 8 mm / 0.31”Package Size: 30 pieces

Accessories for All Module Clamps

139004-005 Module Support PlateIncreases the support area for modulesPackage size: 90 piecesNecessary accessory with Eco Series clamps and with any clamp when modules mounted in horizontal format

|21

Rails and AccessoriesStandard Rails

Wire Management and Accessories

Series 05S-Rail SeriesDN-Rail SeriesBF-Rail Series

Cable ClipsWire TraysEnd CapsMicro Inverter Mounting KitsBonding JumpersCombiner Box Mounting Kits

22|

Standard Railsrails and accessories

h

w

Series 05

For use in conjunction with the KlickTop system; typically used in flush mount projects. NOTE: Minimum quantities may be required on custom cut rails. Contact a Schletter representative for more information.

Mechanical Connections: 119040-00381Top: Klick Channel M8Bottom: Screw Channel M10

for narrow spans

for wider spans

with cable duct

for wider spans

w h mm 30 30

inches 1.18 1.18

w h mm 40 40

inches 1.57 1.57

w h mm 40/62 40

inches 1.57/2.44 1.57

w h mm 40 60

inches 1.57 2.36

w h mm 41 80

inches 1.61 3.15

Eco05 Module Bearing Rail

SoloLT Module Bearing Rail

Profi05 Module Bearing Rail

ProfiPlus05 Module Bearing Rail

ProfiPlus XT Module Bearing Rail

120001-001 Custom Cut Length

120001-04200 4.2 m / 13.78'

120001-06200 6.2 m / 20.34'


120009-04200 4.2 m / 13.78'

120009-06200 6.2 m / 20.34'


120003-04200 4.2 m / 13.78'

120003-06200 6.2 m / 20.34'


120004-04200 4.2 m / 13.78'

120004-06200 6.2 m / 20.34'


120008-06200 6.2 m / 20.34'

|23

Series 05 Splice Kits

129001-000 Eco05 Connector PlatePackage size: 160 pieces

129001-001 Eco05 Connector Plate AssemblyPre-assembled including hardwarePackage size: 160

129060-001 SoloLT and Profi05 Internal SpliceIncludes hardwarePackage size: 125 kits

129074-001 ProfiPlus05 Internal Splice KitIncludes hardwarePackage size: 68 kits

single plate pre-assembled

24|

S-Rail Series

For use as purlins in aluminum ground mount systems and carports. Minimum quantities of 14 to 20 pieces may apply. Contact a Schletter Sales Representation for more information.

Mechanical Connections:Top: Klick Channel M8Bottom: Special mounting/locking clamps, see page 36


124300-06200 6.2 m / 20.34’

124300-008 8 m / 26.25’

124301-06200 6.2 m / 20.34’

124301-008 8 m / 26.25’


124303-06200 6.2 m / 20.34’

124303-008 8 m / 26.25’


124307-06200 6.2 m / 20.34’

124307-008 8 m / 26.25’


124302-06200 6.2 m / 20.34’

124302-008 8 m / 26.25’

Profile S0

Profile S1 Outsidelandscape only

Profile S1.5

Profile S1.8

Profile S1 Inside


|25

splice installation example

S-Rail Series Splice Kits

Each splice requires a connection using self-tapping screws which are provided with each splice.Package sizes: 12, 24, 36, 48 kits (multiples of 12)


124304-06200 6.2 m / 20.34’

124304-008 8 m / 26.25’


124308-06200 6.2 m / 20.34’

124308-008 8 m / 26.25’


124305-06200 6.2 m / 20.34’

124305-008 8 m / 26.25’


124306-06200 6.2 m / 20.34’

124306-008 8 m / 26.25’

129300-000 S0 Internal Splice


129303-000 S1.5 Internal Splice






Profile S2

Profile S3.5

Profile S3

Profile S4

26|

BF-Rail Series

Used as a load distributor for wide spans and in conjunction with the S-Rail Series.

Mechanical Connections:Klick Channel M10


124500-006 6 m / 19.69’

124500-008 8 m / 26.25’


124501-006 6 m / 19.69’

124501-008 8 m / 26.25’


124502-006 6 m / 19.69’

124502-008 8 m / 26.25’


124503-006 6 m / 19.69’

124503-008 8 m / 26.25’

BF0 Mounting Rail

BF1 Mounting Rail

BF2 Mounting Rail

BF3 Mounting Rail


|27

129701-000 BF1 Internal Splice



BF-Rail Series Splice Kits

Each splice requires a connection using self-drilling screws which are provided with each splice.

splice installation example

All BF rails ship from our North Carolina location.

28|

Cable Management

KlickIn™ Component for M8 Square NutsFor simplified placement of the M8 square nut at any desired location in the M8 KlickIn channel of Schletter rails.

129010-008 M8Package size: 100 pieces

KlickTop™ Cross Connector KitFor connecting cross rail systems at any desired location in the M8/M10 Klick channel of Schletter rails.

129004-000 M8Package size: 40 kits

129005-000 ProKlip-CRectangular cable management to be snapped onto the side of Solo05 and Profi05 rails.Package size: 50

129012-001 ProKlip-QRound cable management for use with S-Rail SeriesPackage size: 25

129012-002 ProKlip 2000-PRound cable management for use with S-Rail SeriesPackage size: 50

129042-001 ProKlip-FRound cable tube clip for use with FS foundation postsPackage size: 12

129065-008 ProKlip-Multi 8 Rectangular, to be snapped into the M8 screw channelPackage size: 50

129065-010 ProKlip-Multi 10 Rectangular, to be snapped into the M10 screw channelPackage size: 50

149023-004 HellermannTyton® Cable FastenerPackage size: 100

Cable Management and Accessoriesrails and accessories

Cable Duct S-Rail SeriesCustom cut to length, available in multiple configurations(consult a Schletter Sales Representative to determine project configuration) Mechanical Connection: Self-drilling screws

128003-001 Internal Assembly

128014-001 External Left Assembly

128014-002 External Right Assembly

149000-006 Edge Protection, Left Open

149000-004 Edge Protection, Left Closed

149000-007 Edge Protection, Right Open

149000-005 Edge Protection, Right Closed

installation example with edge protection

|29

129011-000 Plastic End Cap for Solo05 and Profi05 RailsIncluded free of charge in pre-packaged PV systemsPackage size: 48 pieces

Rail End Caps

S-Rail end caps requires 3 self-drilling screws, sold separately.

129059-001 S0 End Cap (right)Package size: 12

129059-002 S0 End Cap (left)Package size: 12



129059-010 S1.5 End CapPackage size: 12







129059-012 S4 End CapPackage size: 12

149120-005 Compatible with S-Series rails, grounding not includedPackage size: 20 kits

149120-004 Compatible with Solo/Profi/Fix-Z rails, includes ETL Listed grounding conductor plate (135004-000); conforms to ANSI/UL Standard 467, certified to CSA Standard C22.1 No. 41 Package size: 20 kits

Micro Inverter Mounting Hardware Kits

For connecting Enphase micro inverters to Schletter rails. Two mounting hardware kits to choose from.

30|

Cable Management and Accessoriesrails and accessories

Grounding Jumpers

Electrically bonds adjacent systems forming a continuous grounding path. Grounding jumper connects directly to purlins and is available in 6, 12, and 24 inch lengths with channel connections of M12, M10, and M8.

For connections to various channels (M12, M10, and M8), select grounding jumper and corresponding hardware based on channel connection size.

M12 Grounding JumpersFor connecting adjacent systems with M10 top channels. Suggested connection hardware listed below Grounding Jumper 6, 12, and 24 inch lengths. Hardware quantities stated are for a single grounding jumper connection.

000022-661 Grounding Jumper, 6 inch



943612-030 Hex head screw, M12x30mm, 304 SS , Qty 2 per Jumper

943921-012 Washer, M12, 304 SS, Qty 2 per Jumper

943912-012 Serrated flange nut, 316 SS, Qty 2 per Jumper

M10 Bottom Channel Grounding JumpersFor connecting adjacent systems with M10 top channels. Suggested connection hardware listed below Grounding Jumper 6, 12, and 24 inch lengths. Hardware quantities stated are for a single grounding jumper connection.






943912-010 Serrated flange nut, M10, 316 SS, Qty 2 per Jumper

|31

M10 Top Channel Grounding JumpersFor connecting adjacent systems with M10 top channels. Suggested connection hardware listed below Grounding Jumper 6, 12, and 24 inch lengths. Hardware quantities stated are for a single grounding jumper connection.




943610-020 Hex head screw, M10x20mm, 304 SS , Qty 2

943921-010 Washer, M10, 304 SS, Qty 4

943912-010 Serrated flange nut, M10, 316 SS, Qty 2

M8 Channel Grounding JumpersFor connecting adjacent systems with M10 top channels. Suggested connection hardware listed below Grounding Jumper 6, 12, and 24 inch lengths. Hardware quantities stated are for a single grounding jumper connection.






943914-008 Serrated flange nut, M8, 316 SS, Qty 2 per Jumper

Combiner Box MountsFor connecting combiner boxes to posts.

149120-001 FS System/FS Uno/FS Duo, M8, 2' Rail Length Package size: 2 kits

175002-004 Park@Sol Carport Combiner and Inverter Mount, 4' Rail Package size: 2 kits

149120-007 PvMax, M8Package size: 2 kits

Combiner Box Mounts

For connection of combiner boxes to Schletter ground mount systems.

|33

System Related ComponentsRoof System Components

FS Product Family Components

FixZ Series™Support AccessoriesWindsafe and Ballasted Systems, Roof Mount

Support Accessories

34|

Roof Mount, System Componentssystem related components

FixZ Series™

Provides additional tilt to PV modules on low-sloped roofs (portrait orientation only). Depending on the panel length, the FixZ-7™ system adds 5° to 7° of tilt; the FixZ-15™ adds 12° to 15° of tilt.

Mechanical Connections:Top: Klick Channel M8Bottom: Screw Channel M10


121001-04200 4.2 m / 13.78’

121001-06200 6.2 m / 20.34’


121003-06200 6.2 m / 20.34’

121003-04200 4.2 m / 13.78'


121002-04200 4.2 m / 13.78’

121002-06200 6.2 m / 20.34’


121004-06200 6.2 m / 20.34’

121004-04200 4.2 m / 13.78'

FixZ-7 Top

FixZ-15 Top

FixZ-7 Bottom

FixZ-15 Bottom — 20Choose FixZ-15 bottom rail based on module manufacturer’s recommended clamping points. Consult a Schletter Sales Representative for further assistance.

|35

129019-001 FixZ-15 Top Splice KitUsed in combination with 129002-002

129070-000 FixZ-7 Internal Splice Kit Top

129071-000 FixZ-7 Internal Splice Kit Bottom

129068-000 FixZ-15 Internal Splice Kit Top

129069-000 FixZ-15 Internal Splice Kit Bottom — 20

FixZ Series™ Splice Kits

Each kit and assembly includes hardware.

Roof System Support Accessories

169015-001 Ballast BlockConcrete; used in the Fix-EZ™ roof mount system

119026-002 Rapid2+™ Angle, M10 ConnectionHigh quality aluminum; used in Fix-EZ system

169015-033 Rail SupportStand-off with KlickTop assembly; used in Fix-EZ system

000018-259 Granulate RubberRubber mat for Fix-EZ ballast block

36|

SolTub Ballast TraysBallast trays typically used for ballasted roof mount systems.

Roof Mount, System Componentssystem related components

w topw bottom

h

Windshot™A back (wind deflector) covering for elevated PV solar systems to reduce the wind loads that impact the system (this component is produced specifically for individual projects; only available upon request).

164500-1260 Windshot, 4' Length



161001-1419 1419 Size 1 Ballast Tray(L)1,419 mm / 4.66 ft (H)152 mm / 6 in(W Bottom) 153 mm / 6 in (W Top) 249 mm / 10 in

161002-1419 1419 Size 2 Ballast Tray(L)1,419 mm / 4.66 ft (H)152 mm / 6 in(W Bottom) 305.5 mm / 12 in (W Top) 399.3 mm / 15.7 in

161001-2029 2029 Size 1 Ballast Tray(L)2,029 mm / 6.65 ft (H)152 mm / 6 in(W Bottom) 153 mm / 6 in (W Top) 249 mm / 10 in

161002-2029 2029 Size 2 Ballast Tray(L)2,029 mm / 6.65 ft (H)152 mm / 6 in(W Bottom) 305.5 mm / 12 in (W Top) 399.3 mm / 15.7 in

161001-2638 2638 Size 1 Ballast Tray, L= 2,638 mm / 8.65 ft (L)2,638 mm / 8.65 ft (H)152 mm / 6 in(W Bottom) 153 mm / 6 in (W Top) 249 mm / 10 in

161002-2638 2638 Size 2 Ballast Tray(L)2,638 mm / 8.65 ft (H)152 mm / 6 in(W Bottom) 305.5 mm / 12 in (W Top) 399.3 mm / 15.7 i

|37

142500-000 FS System, Head AssemblyPre-assembled

149007-000 FS System, Post Splice KitFits post sizes 7 and 8; hardware included

142009-002 FS System, Safety WedgeSecures mounting superstructure to head assembly *Required in all FS System Installations

146001-000 FS System, Mounting ClampLocking; 80 mm

141006-000 FS System, Locking Clamp TopMounts to girder and secures cross rails; 40 mm

141006-002 FS System, Open Clamp BottomMounts to girder and secures cross rails; 40 mm

FS Product Line ComponentsFS System (aluminum), FS Uno, and FS Duo

144999-003 WedgeLocks rails (purlins) into retainer plate

144999-006 Retainer PlateSecures rails (purlins) to girders

149120-001 Combiner Box Mount KitSecures combiner boxes to FS, FS Uno, and FS Duo Systems. Max. combiner box plus contents weight = 100 lbs per kit

|39

HardwareScrews and Bolts

Washers and Nuts

40|

Screws and Boltshardware

Screws and Bolts

Stainless steel, grade 304. Package sizes unless noted otherwise: 25, 50, or 100

Note: Most items are in stock, but some may be special order. Larger volume orders available.

943610-025 M10 x 25

943610-030 M10 x 30

943610-035 M10 x 35

943610-080 M10 x 80

943610-090 M10 x 90

943308-120 M8 x 20with serrated head




943308-040 M8 x 40

943308-055 M8 x 55

943300-060 M8 x 60

943000-034 Ball Bearing for Allen Head Screw, M8

182003-000 Ball Bearing for TORX® T40 (Rapid5k Module Clamps)

182001-000 Installation Tool for Allen Head Screw, M8

182001-001 Installation Tool for TORX T40 (Rapid5k Module Clamps)

Hexagon Head Bolt

Allen Head BoltFor standard module clamps and KlickTops™.

Secufix Anti-theft DeviceSimply hammered into the screw head to prevent easy removal of module clamps.

installation example

|41

943000-707 1/4-14 x 1"

943000-710 1/4-14 x 1"with sealing washer

943000-708 1/4-20 x 1-1/8"

943000-709 1/4-20 x 2"

943000-893 1/4" x 3"

943000-894 1/4" x 4"

943000-895 1/4" x 5"

943000-896 1/4" x 6"

943000-901 5/16" x 3"

943000-902 5/16" x 4"

943000-903 5/16" x 5"

943000-904 5/16" x 6"

943000-897 3/8" x 3"

943000-898 3/8" x 4"

943000-899 3/8" x 5"

943000-900 3/8" x 6"

For steel thicker than 1.5 mm / 0.06”

943718-064 8 x 64with sealing washer

943718-100 8 x 100with sealing washer

Self-drilling ScrewsPackage sizes: 50, 100, 250

Self-tapping ScrewsPackage sizes: 150, 200, 300

Hexagon Head Lag ScrewPackage sizes: 150, 200, 300

42|

Washers and Nutshardware

Washers and Nuts

High quality stainless steel, grade 304. Note: most items are in stock, but some may be special order.Package sizes: 50, 100, or 250

943921-008 M8

943921-010 M10

943921-012 M12

943922-008 M8

943922-010 M10

943922-012 M12

943000-908 1/4"

943000-909 5/16"

943000-910 3/8"

943912-008 M8

943912-010 M10

943912-012 M12

943914-008 M8

943914-010 M10

943914-108 M10 with M8 Hole

943911-008 M8

943911-010 M10

943911-012 M12

Washer

Large Washer

Sealing Washer

Serrated Flange Nut

Square NutSuitable for use with all Schletter rails in combination with Klick Channel and KlickIn™ component.

Self-locking Nut

Event/Workshop InformationE-mail: [email protected]

Connect On-line facebook.com/schletterinc twitter.com/schletterinc youtube.com/schletterinc

Schletter Inc.

www.schletter.us [email protected](888) 608 - 0234

Schletter Canada Inc.

www.schletter.ca [email protected]

Canada Distribution, Sales, and Training3181 Devon DriveWindsor, Ontario N8X 4L3 CanadaTel: (519) 946 - 3800Fax: (519) 946 - 3805

North American Headquarters Manufacturing, Sales, and Training1001 Commerce Center DriveShelby, North Carolina 28150 USATel: (704) 595 - 4200Fax: (704) 595 - 4210

Distribution, Sales, and Training2201 N Forbes BlvdTucson, Arizona 85745 USATel: (520) 289 - 8700Fax: (520) 289 - 8696

solar mounting systems - schletter group components brochure.pdf · high quality aluminum; for easy...

Documents