www.an.geotechnical-equipment.com

Concrete Test Hammer The Concrete Test Hammer is the

traditional instrument used for the non-destructive testing of hardened concrete.

This easy-to-use instrument provides a quick and simple test for obtaining an immediate indication of concrete strength in various parts of a structure

The verifiable strength is between 10 and 70 N/mm2 The test anvil on the other hand is used to verify test hammer calibra- tion.

• The Flexural Testing Machine range of 100 kN and 200 kN capacity have been designed for reliable and consistent testing of concrete beams, transverse test on kerbs and flagstones, indirect tensile tests on concrete and interlocking pavers. The Flexural Machines feature the complete automatic test cycle with a closed loop digital readout. Once the specimen parameter have been introduced, it is sufficient to press the START button to complete the test.

www.an.geotechnical-equipment.com

The Flexural Test assembly on Concrete Beams is used for 3 or 4 point flexural tests on 100 or 150 mm concrete beams.

The distance of the lower bearers can be adjusted between 100mm and 800mm. The distance between upper bearers can be set to 100mm or 150 mm.

During the 3 point Flexural testing one of the bearers can be removed and the other placed in the center. The bearer dimensions are 40mm diameter x 160 mm length.

Bearers For Concrete Beams

www.an.geotechnical-equipment.com

The Air content meter for mortat is designed to determine the air content in cement mortar, cement paste and lime mortar.

Made from cast aluminium, the test pot one litre capacity and the upper part are air-tight sealed by means of two quick action spring clamps.

The whole is connected to a dial gauge directly indicating the air entrainment in percentage, with range 0 - 50%. A built-in operated air pump is also included.

• The Automatic mixer is perfect to mix mortars and cement material according to the required standards. The mixer is very rigid and durable with a planetary motion for its paddle. The mixer is electronically controlled; it has two different speeds that can be operated either on manual or automatic program mode. Thirty seconds after starting the mix the sand is automatic discharged into the mixing bowl. 

Automatic Mortar Mixer