società aerospaziale mediterranea s.c.r.l. the mediterranean aerospace society sam is composed by...

Società Aerospaziale Mediterranea s.c.r.l.Società Aerospaziale Mediterranea s.c.r.l.

The Mediterranean Aerospace Society SAM is composed by eleven Companies (large, small and medium) operating in the

aeronautic and space sector. SAM, a simultaneous engineering system, is one of the first Italian examples of Companies

aggregation in the aerospace sector.

SAM has been founded in order to meet the market needs and to take advantage of all the development opportunities coming from

national and international economic recovery.

THE COMPANYTHE COMPANY


ACTIVITIESACTIVITIES

design, manufacturing and aircraft maintenance activities, development and manufacturing of mechanical and electronic apparatus for aeronautic-space industry

I

N

D

U

S

T

R

Y

advanced technology services on earth observation implemented through satellite, avionic platforms and ground segment for monitoring and surveillance of territorial environment parameters

S

E

R

V

I

C

E

S


INDUSTRYINDUSTRY

A E R O N A U T I C S E C T O R

S P A C E S E C T O R

General Aviation aircraft design and manufacture

General and commercial aircraft maintenance

Avioelectronic board programmes’ upgrading

Prototyping and reverse engineering

No-destructive controls and surface treatments

Interiors design and manufacture

Precision machining

Composite materials design and development

Design and manufacturing of space infrastructures and payloads for scientific and commercial missions, environmental monitoring, telematic and applications

Design, development and manufacturing of on board and ground electronic equipment


SERVICES SERVICES

ENVIRONMENTAL MONITORING

Integrated earth observation system through satellite and avionic platform using multisensor technologies and possessing operating characteristics enabling data acquisition via diverse sensors in a single mission.

Ground segment which guarantees data in the field of Geographic Information 24/7 for environmental monitoring and surveillance services, mapping and value added information for GIS and DDS systems.

APPLICATIONS

Mapping of burnt areas

Monitoring of hydro-geological instability

Monitoring of urban environments

Monitoring of rubbish dumps

Mapping of vegetation and agricultural areas


COMPANIESCOMPANIES


CGS S.p.a. (ex Carlo Gavazzi Space Spa) is acknowledged as one of the largest company in Europe for space systems integration. It is part of a cluster of European enterprises operating in the aerospace and telematic business. Founded in 1981, with headquarters in Milan and excellence centres in Italy, the company employs more than 180 qualified engineers & physicists. CGS has consolidated expertise, resources and facilities to carry out manufacturing, integration, qualification and flight certification. Its success is due to a combination of technical expertise, innovative technologies and low cost solutions which allow to give customers easy access to space.

C O N T A C T SCGS S.p.a.Via Gallarate, 15020151 Milano - ItalyTel. +39 02 380481Fax. +39 02 3086458E-mail: [email protected]: www.cgspace.it

A C T I V I T I E S • Prime contractor at system and/or subsystem level• Satellites: turn-key systems with standard platforms• USV unmanned space reusable vehicles• Payloads and scientific instruments for experiments in microgravity• International Space Station: facilities and payloads• Ground Segment and Ground Support Equipments• Scientific instruments for remote sensing and environmental monitoring• Systems and Services for Earth Observation • Commercial applications of space technologies for security, telemedicine, fleet management, surveillance• Software Projects • SAR image processing• E.O. image compression• Digital and Power electronics• Structural /Thermal research projects • AIT activities (Assembly,Integration,Test)• Product Assurance & Safety

Compagnia Generale dello SpazioCompagnia Generale dello Spazio


Founded in 1986 by Pascale brothers, Tecnam interests are divided into two main activities: the first pertains to the construction and assembly of structural components for commercial aviation

(tailplanes, fuselage panels, etc.) for which it has official qualifications, the other sector of activity pertains, in fact, to the design and manufacture of prototypes and production units for light or ultralight aviation. The distribution network of Tecnam aircraft can rely today on dealers in all major countries. The Company's strategy is particularly dedicated on investing resources in research and development with the aim of continued refinement and upgrading of its products.

C O N T A C T S

TECNAM S.r.l. Via Maiorise snc81043 Capua (Na)-ItalyTel. +39 0823 620134Fax. +39 0823 622899E-mail: [email protected]: www.tecnam.com

P r o d u c t s

Certified

P2002 JR – P2002 JF

P92 JS

Ultralight

P92JA BIRU

P92-2000 RG

PP96 Golf

P2002 Sierra

P92 ECHO – P92 ECHO Super

P2004 BRAVO

P92 SEASKY

Costruzioni Aeronautiche TECNAMCostruzioni Aeronautiche TECNAM


FOX BITFOX BIT

Fox Bit S.r.l. has been working on the innovation technologies market since 1985. The high degree of specialization achieved has allowed Fox Bit to be recognized as Laboratory of Technological Innovation by the Italian Ministry of University and of Scientific and Technological Research. Research and development represent the continuous aim of the whole structure and the technological level of the main customers guarantees stimulus and checks for the continuous growing of the internal know how. The staff is composed mainly of graduates and undergraduates with an high degree of specialization and it is organized in teams related to the activity branch.

C O N T A C T SFOX BIT S.r.l.Via E.Gianturco, 3180146 Napoli - ItalyTel. +39 081 7340777Fax. +39 081 7340808E-mail: [email protected]: www.foxbit.it

Work Packages design for the aeronautics sector

Design and production of electromechanics space structures

development and manufacturing of advanced equipment for ground and flightsegments

Design, prototyping and test for avionics components

Rapid Prototyping and Rapid Tooling

Dedicated hardware and software development processes

Reverse Engineering using 3D laser scanning and 3D CAD Modelling

A C T I V I T I E S


GEVENGEVEN

Geven has over 30 years of experience in the design, testing, production and maintenance of aircraft interiors as well as passenger and crew seating. Its main competence is the in-house design and production of all components thus retaining complete control over the finished product. Geven’s flexible and lean organization combined with custom-made products and continuous attention to costs and material provisioning constitute the basis for its long term competitive advantage. Thanks to its philosophy and flexibility Geven can promptly respond to the individual requirements of customers. Continuously strive to develop innovative and attractive solution, Geven is approved to carry out Static and Dynamic tests in accordance to international regulation.

C O N T A C T S

Economy class: Aquarius, Horizon, Infinity, Luna, Diva

Business class: Genesis

VIP Swivel: Plus

Lavatory: L859, L1179,

Galley and Wardrobe

Costumers

Aeronautica MilitareAgusta WestlandAirbus & ATR trhough AleniaASTC ANTONOVAtitech – Alitalia GroupBoeingBrit AirEADS CasaEADS Sogerma ServicesEmbraerGermania FluggesellschaftLauda AirLufthansaOfficine AeronavaliPiaggio AeroSouth African ExpressStork FokkerThales

P r o d u c t s GEVEN Spa.Via Boscofangone sncZona Industriale Nola Marigliano80035 Nola (Na) - ItalyTel. +39 081 3121311Fax. +39 081 3121321E-mail: [email protected]: www.geven.com


MAGNAGHI AERONAUTICAMAGNAGHI AERONAUTICA

Founded in 1936, the costant attention on preserving and increasing all in-house professional skills, and researching new technologies as well, leaded Magnaghi to take part in many international programmes (EFA, TORNADO, M346, AIRBUS, BOING) and designing, manufacturing and certifying complete Landing Gear Systems autonomously (C27 J, A 109 Power) it has become one of the leading companies in the Landing Gear field. In addition Magnaghi designs and manufactures a large range of hydraulic devices (up-lock and door lock, hydraulic control system), alluminium, steel and titanium sheet work to produce fuel tanks, engine exhaust pipes, oil reservoirs etc.

C O N T A C T S

MAGNAGHI AERONAUTICA S.p.a.Via Galileo Ferraris, 7680142 Napoli- ItalyTel. +39 081 5977300Fax. +39 081 5977301Web: www.magnaghiaeronautica.com

Costumers

AERMACCHIAMX; MB326; MB339; S41

AGUSTA WESTLANDA109; A129; C47; Sikorsky NH90; AB 205/206

ALENIA AERONAUTICAC 27 J; G 22

APPHC 27 J

EMBRAERAMX

LIEBHERRM 346

MESSIER DOWTYATR 42-300; ATR 42-500; ATR 72 AIRBUS

MINISTERO DELLA DIFESA ITALIANA


METAL SUDMETAL SUD

Metal Sud has an experience of more than ten years in the execution of metal pretreatment and painting, as well as conductive painting of plastic materials. It is registered in the Suppliers List of the Italian Defence Administration. Metal Sud pursues: Non destructive controls: magnetic inspection and with penetrants, Heat treatments: stress relief and hydrogen embrittlement relief, Steel, titanium, aluminium and its alloys: degreasing, anodic oxidation, conversion with alodine 1200/1500, passivation, cadmium plating, preparation for bonding of aluminium alloys etc.Metal Sud is also able to furnish, with a closed loop, piping ready to be installed and supplies with standards, taking all necessary steps for thermal treatment and the welding for parts or their vernishing.

C O N T A C T SMETAL SUD S.r.l.Via Nazionale Appia Loc.Crisci81021 Arienzo(CE) - ItalyTel. +39 0823 805397Fax. +39 0823 805089E-mail: [email protected]: www.metalsudsrl.it


M.T. M.T. Mechanical TechnologiesMechanical Technologies

M.T. Mechanical Technologies srl, manufactures equipments, structural and oleodynamic components by machining different materials such as alloys, titanium and high resistant steels. M.T. Mechanical Technologies supplies surface treatments both on steel and aluminium. With its galvanic plant M.T. Srl provides different types of applications on different materials.

A C T I V I T I E S

C O N T A C T S Costumers

•MECAER•ALENIA AERONAUTICA•ALENIA SPAZIO•MAGNAGHI AERONAUTICA•VULCAN AIR•SEI

•CAD-CAM design;•Precision mechanical machinig;•Surface treatments;•Heat treatments;•Plastic deformation and sheet machining;•CNC dimensional controls;•Maintenance;•Static and dynamics tests;•Painting;

M.T. Mechanical Technologies S.r.l.Via Carceri Vecchie, 4680046 S.Giorgio a Cremano (Na) - ItalyTel. +39 081 19363816Fax. +39 081 2143644E-mail: [email protected]: www.mtsrl.net


NUOVA AVIORIPRESENUOVA AVIORIPRESE

Nuova Avioriprese S.r.l. was born in 1980. The company works in the aerophotogrammetry field with its fleet and machineries. The company guarantees its services with great professionalism and efficiency, optimising results with instrumentation technologically advanced. Nuova Avioriprese is a research center, trained to the consultation and orders of research to support the innovation and the scientific and technological developement in the field of consulting services for aerophotogrammetry, aerial takes, orthomap and cartography. The research center allows checks and wide range territorial plannings.

C O N T A C T S

A C T I V I T E S

Aerial takes b/w and colour for cartographic production;

Thematic and synthesis map;

Digital terrestrial photogrammetry;

Goegraphical informative systems (GIS);

Thermographyc and infrared colour takes;

Numerical cartography;

Digital ortho-photo map;

DTM – generation with Lidar technology;

Sightings set-fires

Training and professional education;

Georadar system for non destructive investigations of the subsoil for the location of sub services, archaeological areas etc.

NUOVA AVIORIPRESE S.r.l.Aeroporto di CapodichinoNapoli - ItalyTel. +39 081 5841725Fax. +39 081 3443912E-mail: [email protected]: www.avioriprese.it


SALVERSALVER

Salver, born in 1970, develops and manufactures, in the aeronautic field, products in composite materials, as well as spare parts or bonded assies, realized both in composites and in composite-metal, together with bonded or riveted metal parts. Nowadays Salver is developing, industrializing and manufacturing spare parts and/or assies for new commercial aircraft like: A380 for AIRBUS and in prospect also BOEING B787 and A350. Salver has invested much on men plants and equipment, in order to defend, consolidate and improve its own capacities to compete in the current global market.

C O N T A C T S

SALVER S.p.a.Via D.Macaluso, 2/4 P.O. Box 23272100 Brindisi - ItalyTel. +39 0831 575911Fax. +39 0831 573878E-mail: [email protected]: www.salver.it

ALENIA AERONAUTICAB767/777, ATR 42/72, C27 J, F2000

AIRBUS IndustriesA380

EUROCOPTERA318, A319, A320, A321, NH90, TIGER

GALILEO AVIONICAMIII, Mirach 100/5 (simulator system)

PIAGGIIO AEROINDUSTRIESP180, P166 MP, F2000

AGUSTA WESTLANDAB 139, A 109

AERMACCHIEFA 2000, CF34

EADSDrohne CL 289

WASS- Whitehead Alenia Subwater SystemMU90 UW Torpedo

OAN-Officine AeronavaliDC8 Cargo, DC10 Cargo, Atlantique


TECHNO SYSTEM S.r.l. is specialized in design, development and manufacturing of electronic equipment. Electronic Systems, Subsystems and Units are developed on a custom based approach in order to satisfy in the best way the technical specifications and the user’s requirements for the specific application. The company has internal skills for Hardware and Software developments which enable the implementation of customized and innovative solutions.TECHNO SYSTEM is implementing its own Quality System, described in the Company’s Quality Manual and related Procedures, according to the UNI EN ISO 9001 standard.

C O N T A C T S

AEROSPACE ELECTRONIC

ELECTRONICS FOR SCIENTIFIC PAYLOADS

GROUND SEGMENT PRODUCTS

TECHNO SYSTEM DEVELOPMENTSTECHNO SYSTEM DEVELOPMENTS

TECHNO SYSTEM DEVELOPMENTS S.r.l.Zona Industriale San Martino, 3580078 Pozzuoli (Na) - ItalyTel. +39 081 5263475Fax. +39 081 5262701E-mail: [email protected]: www.tsdev.it


TECNO INTECNO IN

C O N T A C T S TECNO IN S.p.a.II Traversa Strettola S.Anna alle Paludi, 1180142 Napoli - ItalyTel. +39 081 5634520Fax. +39 081 5633970E-mail: [email protected]: www.tecnoin.it

• Structures monitoring and civil work• Geoarchealogy•Cavity and hydraulic manufacture rilief•Structural diagnostic•Laser Scanner 3D – Topografy•Geophysic•Geology•Research and development

A C T I V I T I E S

TECNO IN S.p.a. works across several sectors of civil engineering, it provides its competences in the general field of engineering services. TecnoIn supplies test equipments, control systems and instruments to be used for different applications like civil and industril works, monumental and enviromental applications.


CONTACTSCONTACTS

Tel/Fax: 081 250 71 30

E-MAIL: [email protected]

WEBSITE: www.samaerospazio.it

HeadquartersVia A. Olivetti, 1

80078 Pozzuoli NA Italy

società aerospaziale mediterranea s.c.r.l. the mediterranean aerospace society sam is composed by...

Documents

c t s tecnam

c t s cgs

c o n t

u t i c s e c t o r

c t i v

development design

activities design

space systems integration