Post on 14-Jul-2016
Embed Size (px)
A Massive Selection of Plumbing Supplies and Fixtures available in New Jersey from Crosstown Plumbing of East Orange
FORCES DUE TO FLOW THROUGH PIPES BENDAndersen - Osel Sakadewa1406604626 - 1406604600Teknik Kimia1A BUM GUNA Bum Gun with entrance diameter 27 mm and at exit is 25 mm working at the pressure from 0.1 MPa ~ 1 MPa. The grip and the mouth make a 1350 angle bend. The flow rate is 0.25 kg/s.Neglecting the friction, determine the magnitude needed and the direction to suspend the forces exerted by the water!
STEPS 1 AND 2
Define the control volume. This contains the fluid in the pipebetween the inlet,1, and the outlet, 2, shown below with the co-ordinate axes.
STEPS 3 AND 4
A plumber is an adventurer who traces leaky pipes to their source.- Arthur Baer
Forces through Pipe Bend
Step 1 & 2