sneeze guard solutions catalog
DESCRIPTION
Sneeze guard Solutions is the manufacturer of the original folding portable sneeze guard system. We offer a variety of sizes and shapes to accommodate almost any need for portable to stationary food safety and presentation.TRANSCRIPT
2508-B Paris RoadColumbia, Mo. 65202-2514Ph: 800-569-2056Fax: 573-449-7126Email: [email protected]
Folding PortableDisplay Guard
Mid-Mount Stationary
Ambassador Angled Divider
Ambassador
Carousel
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com * Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
SpecificationsFolding Portable Sneezeguard
• Use 1 for single sided service or 2 back to back for double sided table service.• 14” Wrist Clearance.• Designed to fit standard sized banquet tables.• For use when food is not elevated above table.
Concerned about how to store your sneeze guards to prevent damage?
Storage and handling solutions are available.
Fo
ldin
g P
or
ta
ble
Phone: 800-569-2056
Specifications
28.50"
16.50"
14.00"
22.50"
2.50"
2.00"
9.00"13.00"
Bottom of Stand
Model # Nominal Length Overall Length Between Stands Weight Color Available0801 2 foot* 25.5” 20.5” 8 lbs Black/Rich Gold0901 3 foot* 34.75” 29.75” 9 lbs Black/Rich Gold1001 4 foot 46.75” 41.75” 10 lbs Black/Rich Gold1101 5 foot 58.75” 53.75” 13 lbs Black/Rich Gold1201 6 foot 70.75” 65.75” 14 lbs Black/Rich Gold1281 8 foot 94.75” 89.75” 18 lbs Black/Rich Gold
*One leg does not lock in a closed position due to short length of guard.Call for quote on substituting tempered glass for Acrylic food shield.Silver available upon request
When ordering Rich Gold, change last digit to 2 for color selection.
Fold
ing
Po
rt
able
• Exclusive extruded 1” Groove Tube• Mounted in rubber gasket• 1.25” aluminum stands• Scratch resistant acrylic food shield• Powder coated finish
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com * Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
Specifications
• Use 1 for single sided service or 2 back to back for double sided table service.• 18” Wrist Clearance.• Designed to fit standard sized banquet tables.• For use when chaffers, ice boats, or other elevated containers are used.
Concerned about how to store your sneeze guards to prevent damage?
Storage and handling solutions are available.
Hi-Profile Folding Portable Sneezeguard
Hi-
Pr
ofi
le P
or
ta
ble
Phone: 800-569-2056
Specifications
32.50"
16.50"
18.00"
22.50"
2.50"
2.00"
9.00"13.00"
Bottom of Stand
Model # Nominal Length Overall Length Between Stands Weight Color Available0801 HP 2 foot* 25.5” 20.5” 8 lbs Black/Rich Gold0901 HP 3 foot* 34.75” 29.75” 9 lbs Black/Rich Gold1001 HP 4 foot 46.75” 41.75” 10 lbs Black/Rich Gold1101 HP 5 foot 58.75” 53.75” 13 lbs Black/Rich Gold1201 HP 6 foot 70.75” 65.75” 14 lbs Black/Rich Gold1281 HP 8 foot 94.75” 89.75” 18 lbs Black/Rich Gold
*One leg does not lock in a closed position due to short length of guard.Call for quote on substituting tempered glass for Acrylic food shield.Silver available upon request
When ordering Rich Gold, change last digit to 2 for color selection.
Hi-P
ro
file Po
rt
able • Exclusive extruded 1” Groove Tube
• Mounted in rubber gasket• 1.25” aluminum stands• Scratch resistant acrylic food shield• Powder coated finish
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com * Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
Specifications
• Use 1 for single sided service or 2 back to back for double sided table service.• 11” Wrist Clearance.• Designed to fit standard sized banquet tables.• For use in elementary schools, sampling, and high counters.
Concerned about how to store your sneeze guards to prevent damage?
Storage and handling solutions are available.
Low Profile Folding Portable Sneezeguard
Low
Pr
ofi
le P
or
ta
ble
Phone: 800-569-2056
Specifications
*One leg does not lock in a closed position due to short length of guard.
Silver available upon request
When ordering Rich Gold, change last digit to 2 for color selection.
11 inch wrist clearance for young patrons
16.50"
11.00"
25.50"
2.50"
2.00"
9.00"13.00"
Bottom of Stand
Model # Nominal Length Overall Length Between Stands Weight Color Available0801 LP 2 foot* 25.5” 20.5” 8 lbs Black/Rich Gold0901 LP 3 foot* 34.75” 29.75” 9 lbs Black/Rich Gold1001 LP 4 foot 46.75” 41.75” 10 lbs Black/Rich Gold1101 LP 5 foot 58.75” 53.75” 13 lbs Black/Rich Gold1201 LP 6 foot 70.75” 65.75” 14 lbs Black/Rich Gold1281 LP 8 foot 94.75” 89.75” 18 lbs Black/Rich Gold
Low
Pr
ofile P
or
ta
ble • Exclusive extruded 1” Groove Tube• Mounted in rubber gasket• 1.25” aluminum stands• Scratch resistant acrylic food shield• Powder coated finish
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com * Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
Specifications
• Same “Easy as 1, 2, 3” setup and take down operation.
• New telescopic stand design allows guard opening to extend from 14” to 18” in height.
• Cost effective - Use one guard for different setups.
• Available in 2’ , 3’ , 4’ , 5’ and 6’ lengths.
• Black or Rich Gold finish
Chafer GuardAdjustable Sneeze guard
Ch
afe
r g
ua
rd
Phone: 800-569-2056
Specifications
15.00"
27.50"
14.00"or
18.00"
15.00"10.88"
Model # Nominal Length Overall Length Between Stands Weight Color Available1921 2 foot* 28” 23.25” 8 lbs Black/Rich Gold1931 3 foot 37.25” 32.5” 9 lbs Black/Rich Gold1941 4 foot 46.5” 41.75” 10 lbs Black/Rich Gold1951 5 foot 58.5” 53.75” 13 lbs Black/Rich Gold1961 6 foot 70.5” 65.75” 14 lbs Black/Rich Gold
*One leg does not lock in a closed position due to short length of guard.Call for quote on substituting tempered glass for Acrylic food shield.
When ordering Rich Gold, change last digit to 2 for color selection.
ch
afer
gu
ar
d • Exclusive extruded 1” Groove Tube• Mounted in rubber gasket• 1.25” aluminum stands• Scratch resistant acrylic food shield• Powder coated finish
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com * Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
Specifications
Protect your investment, ensure proper storage and handling.
Storage and handling solutions are available.
Sampler Sneezeguard
•Designed for use in grocery store/wholesale club food sampling, continental breakfast’s, and to cover condiments.
Sam
pler
Gu
ar
d
Phone: 800-569-2056
Specifications
7.00"
16.50"
16.50"
13.25"
Model # Nominal Length Overall Length Between Stands Weight Colors Available6001 2 foot 25.5” 20.5” 6 lbs Black6101 3 foot 34.75” 29.75” 8 lbs Black
Available in Black Only.
Sam
pler G
ua
rd
• Exclusive extruded 1” Groove Tube• Mounted in rubber gasket• 1.25” aluminum stands• Scratch resistant acrylic food shield• Powder coated finish
1.50"
3.00"
2.50"
9.25"
Bottom of Stand
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com * Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
Specifications Folding PortableDisplay Sneezeguard
Meets Service and Self-Service Requirements
Dis
pla
y G
ua
rd
Phone: 800-569-2056
Specifications
14.00"
18.375"
25.25"
Ø 1.5"x2
9.75"11.25"
Model # Nominal Length Overall Length Between Stands Weight Colors Available0841 2 foot* 25.5” 20.5” 8 lbs Black0941 3foot* 34.75” 29.75” 9 lbs Black1041 4 foot 46.75” 41.75” 10 lbs Black1141 5 foot 58.75” 53.75” 13 lbs Black1241 6 foot 70.75” 65.75” 14 lbs Black
*One leg does not lock in a closed position due to short length of guard.Available in Black Only.
Displa
y Gu
ar
d
• Exclusive extruded 1” Groove Tube• Mounted in rubber gasket• 1.25” aluminum stands• Scratch resistant acrylic food shield• Powder coated finish
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com * Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
Specifications Carousel Sneezeguard
Front view of Carousel
Stand alone half-round Carousel with standard Carousel stands
Suggestion:Add two straight portable guards between each half of the Carousel for a oval setup and unique food presentation.
Ca
ro
use
l G
ua
rd
Phone: 800-569-2056
Specifications
28.00"16.50"
14.00"
A
Model # Description Dimensions “A” Weight Colors Available4001 Carousel 60” Round 27 lbs Black/Rich Gold4101 Half-Round 60” Diameter 15 lbs Black/Rich Gold4201 Carousel 72” Round 30 lbs Black/Rich Gold4301 Half-Round 72” Diameter 17 lbs Black/Rich Gold
When ordering Rich Gold, change last digit to 2 for color selection.Add HP after model number to indicate that Hi-profile stands are desired for 18” wrist clearance.
Ca
ro
usel G
ua
rd
• Exclusive extruded 1” Groove Tube• Mounted in rubber gasket• 1.25” aluminum stands• Scratch resistant acrylic food shield• Powder coated finish
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com * Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
Specifications
Large RadiusSerpentine shown
Small Radius Serpentine shown
Large and Small Radius Serpentine guards placed together to protect food offerings on serpentine tables
Serpentine Sneezeguard
Ser
pen
tin
e G
ua
rd
Phone: 800-569-2056
Specifications
A
Serpentine table top viewlarge radius side
small radius side
Table Top
28.00"32.00” HP
14.00"18.00” HP
16.50"
Model # Description Table measurmentDistance “A”
Weight Colors Available
7501 5’ Small Radius 84” 14 lbs Black/Rich Gold7601 5’ Large Radius 84” 15 lbs Black/Rich Gold7701 6’ Small Radius 102” 15 lbs Black/Rich Gold7801 6’ Large Radius 102” 17 lbs Black/Rich Gold
When ordering Rich Gold, change last digit to 2 for color selection.Add HP after model number to indicate that Hi-profile stands are desired for 18” wrist clearance.
Serpen
tin
e Gu
ar
d • Exclusive extruded 1” Groove Tube• Mounted in rubber gasket• 1.25” aluminum stands• Scratch resistant acrylic food shield• Powder coated finish
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com * Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
SpecificationsMid-Mount Stationary Sneezeguard
Mid
-Mo
un
t St
atio
na
ry
Phone: 800-569-2056
Specifications
28.50"
16.50"
16.625"
14.00"
Surface Mount
2.00"
4.00"
Ø 1.25"
2.00"
*Installation Tip:The Surface Mount footpad can be rotated to allow either the two or four inch side of the footpad to face the front edge of the counter.
Model # Nominal Length Overall Length Between Stands Weight Colors Available2091 2 foot 25.5” 21” 8 lbs Black/Rich Gold2101 3 foot 34.75” 30.25” 9 lbs Black/Rich Gold2201 4 foot 46.75” 42.25” 10 lbs Black/Rich Gold2301 5 foot 58.75” 54.25” 13 lbs Black/Rich Gold2401 6 foot 70.75” 66.25” 14 lbs Black/Rich Gold2481 8 foot 94.75” 90.25” 18 lbs Black/Rich Gold
Silver available upon requestCall for quote on substituting tempered glass for Acrylic food shield.When ordering Rich Gold, change last digit to 2 for color selection.
Mid
-Mo
un
t Stat
ion
ar
y
• Exclusive extruded 1” Groove Tube• Mounted in rubber gasket• 1.25” aluminum stands• Scratch resistant acrylic food shield• Powder coated finish
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com * Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
SpecificationsFront Mount Stationary Sneezeguard
Fro
nt
Mo
un
t St
atio
na
ry
Phone: 800-569-2056
Specifications
28.00"
16.50"
14.00"
Surface Mount
2.00"
4.00"
Ø 1.25"
2.00"
Model # Nominal Length Overall Length Between Stands Weight Colors Available2091 FM 2 foot 25” 21” 8 lbs Black/Rich Gold2101 FM 3 foot 34.25” 30.25” 9 lbs Black/Rich Gold2201 FM 4 foot 46.25” 42.25” 10 lbs Black/Rich Gold2301 FM 5 foot 58.25” 54.25” 13 lbs Black/Rich Gold2401 FM 6 foot 70.25” 66.25” 14 lbs Black/Rich Gold2481 FM 8 foot 94.25” 90.25” 18 lbs Black/Rich Gold
Silver available upon requestCall for quote on substituting tempered glass for Acrylic food shield.When ordering Rich Gold, change last digit to 2 for color selection.
Fro
nt M
ou
nt St
atio
na
ry
• Exclusive extruded 1” Groove Tube• Mounted in rubber gasket• 1.25” aluminum stands• Scratch resistant acrylic food shield• Powder coated finish
*Installation Tip:The Surface Mount footpad can be rotated to allow either the two or four inch side of the footpad to face the front edge of the counter.
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com * Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
SpecificationsAngled Divider Stationary Sneezeguard
An
gle
d D
ivid
er S
tat
ion
ar
y
Phone: 800-569-2056
Specifications
14.00"
16.50"
2.25"
Surface Mount
2.00"
4.00"
Ø 1.25"
2.00"
Model # Nominal Length Overall Length Between Stands Weight Colors Available2091 DA 2 foot 25” 21” 6 lbs Black/Rich Gold2101 DA 3 foot 34.25” 30.25” 7 lbs Black/Rich Gold2201 DA 4 foot 46.25” 42.25” 9 lbs Black/Rich Gold2301 DA 5 foot 58.25” 54.25” 11 lbs Black/Rich Gold2401 DA 6 foot 70.25” 66.25” 13 lbs Black/Rich Gold2481 DA 8 foot 94.25” 90.25” 17 lbs Black/Rich Gold
When ordering Rich Gold, change last digit to 2 for color selection.Call for quote on substituting acrylic for tempered glass food shield.Silver available upon request.
An
gled
Div
ider
Stat
ion
ar
y
• Exclusive extruded 1” Groove Tube• Mounted in rubber gasket• 1.25” aluminum stands• Scratch resistant acrylic food shield• Powder coated finish
*Installation Tip:The Surface Mount footpad can be rotated to allow either the two or four inch side of the footpad to face the front edge of the counter.
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com * Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
SpecificationsVertical Divider Stationary Sneezeguard
Ver
tic
al
Div
ider
St
atio
na
ry
Phone: 800-569-2056
Specifications
Surface Mount
2.00"
4.00"
Ø 1.25"
2.00"
16.50"
2.25"
Model # Nominal Length Overall Length Between Stands Weight Colors Available2091 DV 2 foot 25” 21” 6 lbs Black/Rich Gold2101 DV 3 foot 34.25” 30.25” 7 lbs Black/Rich Gold2201 DV 4 foot 46.25” 42.25” 9 lbs Black/Rich Gold2301 DV 5 foot 58.25” 54.25” 11 lbs Black/Rich Gold2401 DV 6 foot 70.25” 66.25” 13 lbs Black/Rich Gold2481 DV 8 foot 94.25” 90.25” 17 lbs Black/Rich Gold
When ordering Rich Gold, change last digit to 2 for color selection.Call for quote on substituting acrylic for tempered glass food shield.Silver available upon request.
Ver
tic
al D
ivid
er St
atio
na
ry
• Exclusive extruded 1” Groove Tube• Mounted in rubber gasket• 1.25” aluminum stands• Scratch resistant acrylic food shield• Powder coated finish
*Installation Tip:The Surface Mount footpad can be rotated to allow either the two or four inch side of the footpad to face the front edge of the counter.
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com * Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
Specifications
Glass can be purchased locally or call for pricing from Sneezeguard Solutions
* If the shelf width required is over 8 inches then side panels must be used to provide additional support
Tempered Glass and Groove Tube Construction
*with side panel and glass clips *without side panel
Ambassador AngledStationary Sneezeguard
Am
ba
ssa
do
r A
ng
led
Phone: 800-569-2056
Specifications
Gold and Silver available upon request
*Please consult the custom sneezeguard chart before ordering to ensure the proper length of guard needed. If there are any questions concerning the procedure please feel free to call (800) 569-2056 M-Th 8am to 5pm CT and Fri 8am to 3pm CT.
Accepts 3/16” or 1/4” tempered glass. Recommended center line spacing is 60” for 1/4” tempered glass and 48” for 3/16” tempered glass.
Surface Mount
10° Hole
2.00"
4.00"
Ø 1.00"
Bridge Surface Mount
1.50"
Ø1.00"x2
10° Holes
4.00"
2.50"PN# AB-2A
8.00"
80.00°
PN# AB-5 A
PN# AB-1A
8.00"
80.00°
Part # Description Weight Stock Colors*AB-1 A Right frame side 2 lbs BlackAB-2 A Left frame side 2 lbs BlackAB-3 A Right side frame w/glass clip 3 lbs BlackAB-4 A Left side frame w/ glass clip 3 lbs BlackAB-5 A Center frame 5 lbs BlackAB-6 A Center frame w/glass clip 5 lbs BlackAB-7 A Shelf frame 1 lb BlackAB-9 A End panel rear foot pad 1 lb Black
Am
ba
ssad
or
An
gled
• Exclusive extruded 1” Groove Tube frame• Mounted in rubber gasket• Powder coated finish
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com * Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
Specifications
*with side panel and glass clips *without side panel
* If the shelf width required is over 8 inches then side panels must be used to provide additional support
Ambassador VerticalStationary Sneezeguard
Am
ba
ssa
do
r v
ert
ica
l
Phone: 800-569-2056
Specifications
*Please consult the custom sneezeguard chart before ordering to ensure the proper length of guard needed. If there are any questions concerning the procedure please feel free to call (800) 569-2056 M-Th 8am to 5pm CT and Fri 8am to 3pm CT.
Gold and Silver available upon requestAccepts 3/16” or 1/4” tempered glass. Recommended center line spacing is 60” for 1/4” tempered glass and 48” for 3/16” tempered glass.
PN# AB-5V
PN# AB-2V
8.00
18.00"
Bridge Surface Mount
1.50"
Ø1.00"x2
4.00"
2.50"
Surface Mount
2.00"
4.00"
Ø 1.00"
PN# AB-1V
8.00"
18.00"
Part # Description Weight Stock Colors*AB-1 V Right frame side 2 lbs BlackAB-2 V Left frame side 2 lbs BlackAB-3 V Right side frame w/glass clip 3 lbs BlackAB-4 V Left side frame w/ glass clip 3 lbs BlackAB-5 V Center frame 5 lbs BlackAB-6 V Center frame w/glass clip 5 lbs BlackAB-7 V Shelf frame 1 lb BlackAB-8 V Center frame 90˚ 5 lbs BlackAB-9 V End panel rear foot pad 1 lb Black
Am
ba
ssad
or
ver
tic
al
• Exclusive extruded 1” Groove Tube frame• Mounted in rubber gasket• Powder coated finish
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com * Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
SpecificationsAmbassador Angled Divider
Am
ba
ssa
do
r A
ng
led
Div
ider
Phone: 800-569-2056
Specifications
*Please consult the custom sneezeguard chart before ordering to ensure the proper length of guard needed. If there are any questions concerning the procedure please feel free to call (800) 569-2056 M-Th 8am to 5pm CT and Fri 8am to 3pm CT.
Gold and Silver available upon requestAccepts 3/16” or 1/4” tempered glass. Recommended center line spacing is 60” for 1/4” tempered glass and 48” for 3/16” tempered glass.
PN# AB-1 DA
4.00"
18.00"
Surface Mount
10° Hole
2.00"
4.00"
Ø 1.00"
Bridge Surface Mount
1.50"
Ø1.00"x2
10° Holes
4.00"
2.50"PN# AB-2 DA
18.00"
4.00"
PN# AB-5 DA
Part # Description Weight Stock Colors*AB-1 DA Right frame side 2 lbs BlackAB-2 DA Left frame side 2 lbs BlackAB-5 DA Center frame 5 lbs Black
Am
ba
ssad
or
An
gled
Div
ider
• Exclusive extruded 1” Groove Tube frame• Mounted in rubber gasket• Powder coated finish
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com * Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
SpecificationsAmbassador Vertical Divider
Am
bas
sad
or
Ver
tic
al D
ivid
er
Phone: 800-569-2056
Specifications
*Please consult the custom sneezeguard chart before ordering to ensure the proper length of guard needed. If there are any questions concerning the procedure please feel free to call (800) 569-2056 M-Th 8am to 5pm CT and Fri 8am to 3pm CT.
Gold and Silver available upon requestAccepts 3/16” or 1/4” tempered glass. Recommended center line spacing is 60” for 1/4” tempered glass and 48” for 3/16” tempered glass.
PN# AB-2 DV
18.00"
4.00"
PN# AB-1 DV
18.00"
4.00"
PN# AB-8 DV
Surface Mount
2.00"
4.00"
Ø 1.00"
Bridge Surface Mount
1.50"
Ø1.00"x2
4.00"
2.50"
Part # Description Weight Stock Colors*AB-1 DV Right frame side 2 lbs BlackAB-2 DV Left frame side 2 lbs BlackAB-8 DV Center frame 90° 5 lbs Black
Am
bassad
or
Ver
tical D
ivid
er • Exclusive extruded 1” Groove Tube frame• Mounted in rubber gasket• Powder coated finish
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com
* Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
SpecificationsThe SneezeguardStorcart
Th
e St
or
ca
rt
Phone: 800-569-2056
Specifications
* Model 1300 without casters.** Model 1450 includes casters.*** Model 1455 is a Double-Deck Storcart with casters.**** Extension Kit for Hi-Profile guards.
* Shown with optional caster kit. Storcart height without caster kit is 31.75” inches overall
78” overall length
*Caster Information (#1400):• 4” diameter wheel.• 2 with brakes, 2 with directional locks.• Performa© wheel material (non-marking).• NSF approved.
30.00"
37.00"
31.75"
Model # Length Width Height Weight Colors Available*1300 78” 30” 31.75” 85 lbs Black**1450 78” 30” 37.00” 105 lbs Black ***1455 78” 30” 69.00” 190 lbs Black****1330 N/A N/A 4.00” 1 lbs Black
Th
e Sto
rc
ar
t
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com
Expander Kit (set of 4) Part # 1330
•Designed to allow the Storcart frame to expand an additional 4 inches in order to accomodate the extended height of Hi-Profile sneezeguards.
Union Kit (set of 4) Part # 1500
•Designed to be inserted into the Storcart frame in order to allow the placement of an additional Storcart on top of the first creating a double deck storage system.
Caster Kit Part # 1400
•Designed to be inserted into the bottom of the Storcart frame enabling ease of movement of the Storcart when placing or retrieving sneezeguards.•5.25” Caster
Storcart Accessories
Sto
rc
art
acc
esso
rie
s
Phone: 800-569-2056
Double Decker Model shown 18 Sneezeguard capacity 69” Overall Height
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com
Specifications
Sampler Guardwall storage rack
Serpentine and Carousel wall storage rack
Wall Storage Units
Wa
ll S
to
rag
e U
nit
s
Phone: 800-569-2056
Specifications
17.50"
24.50"
24.00"
18.00"
Model # Height Width Weight Colors Available6500 24.5” 17.5” 5 lbs Polished Aluminum
Model # Height Width Weight Colors Available4575 24” 18” 5 lbs Polished Aluminum
Wa
ll Sto
rag
e Un
its
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com
Standard Storecase Part # 1830 3 Ft. Part # 1840 4 Ft. Part # 1850 5 Ft. Part # 1860 6 Ft.
The standard storcase provides protection while transporting and storing individual sneezeguards maintaining their attractive appearance. The standard
storcase is made from premium Cordura nylon fabric.
Storcases
Sto
rec
ase
Phone: 800-569-2056
Sampler Storcase Part # 6525 2 Ft. Part # 6550 3 Ft.
The sampler storcase is a great way to transport your sampler station sneezeguard to and from the service area while offering the utmost in protection and
portability. The sampler storcase is made from premium cotton to ensure a great look and long lasting service.
Storcases Storcases
Sto
rec
ase
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com
Folding Portable Stand Part # 1600
• Standard 14” wrist clearance for service over serving wells or serving trays.
• Design allows for unobstructed reach-in for patrons.
• Easy spring push-button folding for storage and portability.
Hi-Profile Folding Portable Stand Part # 1600HP
• Produces 18” wrist clearance for chafing dishes, ice boats, or riser/stepped food presentations.
• Easy spring push-button folding for storage and portability.
Low Profile Stand Part # 1600LP
• Produces 11” wrist clearance for young elementary school or wheel chair patrons.
• Easy folding for storage and portability.
Sampler Stand Part # 1620
• Grocery or mass merchandiser sampling station 7” wrist clearance. Also used for coffee break pastry service protection.
• Easy folding for storage and portability.
Chafer Guard Stand Part # 1900
• Telescopic Stand that easily adjusts from a standard 14” wrist clearance to 18” wrist clearance with the push of a button.
• Easy spring push-button folding for storage and portability.
* Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
SneezeguardReplacement Stands
Rep
lac
emen
t St
an
ds
Phone: 800-569-2056
Portable Bridge Part # 1700
• Allows a standard 14” wrist clearance stand to connect between two guards. Easy disconnect for storing.
Hi-Profile Portable Bridge Part # 1700HP
• Bridging for when 18” wrist clearance is desired.
Mid-Mount Stationary Stand Part # 2500
• Modern-looking permanent mount stand position allows unobstructed reach-in for patrons.
Front Mount Stand Part # 2520
• Mounts on front corners where lateral space may be limited.
• Standard 14” wrist clearance.
* Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
SneezeguardReplacement Stands
Replac
emen
t Sta
nd
s
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com
Mid-Mount Stationary Part # 2600Bridge Stand
• Bridges mid-mount standard 14” wrist clearance guard. assemblies in a row.
Angled Divider Stand Part # 2540
• Connects to standard or custom length guard assembly.
• 30° Angle.
Bridged Angled Divider Stand Part # 2545
• Connects two Angled Divider guards onto one stand.
Vertical Divider Stand Part # 2550
• Connects to standard or custom length guard assembly.
Bridged Vertical Divider Stand Part # 2555
• Connects two Vertical Divider stands onto one stand.
* Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
SneezeguardReplacement Stands
Rep
lac
emen
t St
an
ds
Phone: 800-569-2056
Front Mount Bridge Part # 2620
• Connects two Front mount guards onto one stand.
60 inch Diameter Carousel Stand Part # 4150
• Used for 14” wrist clearance serving.
60 inch Diameter Hi-profile Part # 4150HPCarousel Stand • Used when 18” wrist clearance desired for chafing dishes or risers.
72 inch Diameter Carousel Stand Part # 4350
• Used when 14” wrist clearance desired.
72 inch Diameter Hi-profile Part # 4350HPCarousel Stand
• Used when 18” wrist clearance is desired.
* Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
SneezeguardReplacement Stands
Replac
emen
t Sta
nd
s
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com
Toe Plug Part # RODON-1
• The Toe Plug press fits into the lower portion of the sneezeguard stand making a finished appearance.
Bushing Part # CM-2b
• Top bushing provides smooth connection and operation between stands and guard assembly. Used in carousels and Serpentine.
Exterior Bushing Part # CM-2
• Used on sneezeguards stands for support and smooth operation.
Push Pin Part # VALCO-1
• Used to spring lock stands in either the open or closed position.
Corner Connector Part # CM-1
• Secures Groove tube sections at a right angle.
* Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
Sneezeguard replacementHardware
Rep
lac
emen
t H
ar
dw
ar
e
Phone: 800-569-2056
Connecting Tube Cap Part # CM-3
• Used to finish the top of the connecting tube (which receives a stand) on a guard assembly.
Groove Tube Gasket Part # TM-1
• Finishes and provides barrier between acrylic or glass food shield and groove tube in a guard assembly.
Display Guard End Cap Part # JAWS-3
• The Display Guard End Cap is used to finish the end of the display guard assembly.
Solid Guard End Cap Part # JAWS-4
• Used to finish the end of the Ambassador guard assembly.
* Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
Sneezeguard replacementHardware
Replac
emen
t Ha
rd
wa
re
Phone: 800-569-2056Fax: 573-449-7126
www.sneezeguard-solutions.com
Elevator Set Part # 3300
• Adds utility to 14” wrist clearance sneezeguards providing 18” wrist clearance on occasions when chafing dishes are used.
Front Panel Part # 3910 3 Ft.* Part # 3920 4 Ft.* Part # 3930 5 Ft.** Part # 3940 6 Ft.** Part # 3900 8 Ft. or custom length • Adds self utility to 14” wrist clearance sneezeguards
allowing either self-service or pass-over.
• Extends from the bottom-front of standard sneezeguard to the table or counter top.
Guard Assembly Part # 2690 2 Ft. Part # 2700 3 Ft. Part # 2800 4 Ft. Part # 2900 5 Ft. Part # 3000 6 Ft. Part # 3080 8 Ft. or custom length
• The Guard Assembly replaces damaged or broken sneeze guard frames.
• This is a complete sneezeguard minus the stands.
* Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
Sneezeguard Accessories
Snee
ze
gu
ar
d A
cc
esso
rie
s
Phone: 800-569-2056
Acrylic Replacement Kit Part # 3400 2 Ft.* Part # 3500 3 Ft.* Part # 3600 4 Ft.* Part # 3700 5 Ft.** Part # 3800 6 Ft.** Part # 3880 8 Ft. or custom length
• Easy field replacement for damaged or worn acrylic food shields, complete with shield, gasket, and corner connectors.
*UPS classified as 30 lbs Oversize 1 ** UPS classified as 70 lbs Oversize 2
Full End Panel Part # 3945* Part # 3948** Part # 3952***
• Option to restrict access by patrons at the ends of the service line.
* single side stationary ** single side portable *** single side hi-profile
Sampler End Panel Part # 3944
• Option to restrict access by patrons at the ends ofthe service line.
* Images are computer renderings, not actual photos, some color variance may occur from what is rendered to the actual powder coat finish.
Sneezeguard Accessories
Sneez
e gu
ar
d A
cc
essor
ies
Plexus® cleans surfaces and simultaneously applies
protective coating to repel fingerprints, smudges, dirt and debris, making future maintenance a breeze.
This revolutionary breakthrough product can be used on a variety of surfaces and finishes, listed are a few examples:
•Plastic/Acrylic •Formica •PVC•Fiberglass •Vinyl •Brass•Lucite •Lexan •Enamel•Marble •Chrome •Mylar•PolyCarbonate •Polyester
Plexus® contains four cleaning agents, leaves no residue, eliminates
static electricity lessening dust buildup and lays down a wax polish while maintaining a sparkling appearance.
Not only is this product great for cleaning and maintaining your sneeze guards but this product can also protect your cars paint and clear coat, the finish on your boat, computer, DVD’s, CD’s, monitor, -the possibilities are virtually endless.
Need to shave some strokes off of your golf game?
That’s right, try Plexus® on your favorite set of clubs and reduce the drag and increase your club head speed, and don’t forget about the golf balls!
Work or play Plexus® is the solution for your needs.
Maintenance Solutions
Also available in 7 oz size cans
Please indicate choice:
2. You want: Stationary stands Portable stands Double sided Single sided
3. You want: Hammer Black Rich Gold
Standard height stands (14” wrist clearance) Hi profile stands (18” wrist clearance) Sampler height stands (7” wrist clearance)
4. Number of complete sneezeguards required:
Five week lead time from receipt of order for shipment from our plant in Columbia, Missouri.
NAME DATE
COMPANY PHONE
ADDRESS FAX
Please use this form to provide us information for custom sneezeguards.
1. Please indicate the condition requiring a custom sneezeguard.(A.) The span under the sneeze guard must be at least inches.(B.) The overall length at the stands must not exceed inches.(C.) For glass panels dimension “C” is the center line dimension based upon stand placement. Recommended width is 60” for 1/4” tempered glass panels and 48” for 3/16” tempered glass panels.
Custom Sneezeguard Form
C
A
B
2508-B PARIS ROADCOLUMBIA, MISSOURI 65202-2514
573-443-5756•Fax:573-449-7126800-569-2056
e-mail: [email protected]
28.50"
16.50"
14.00"
22.50"
Original Folding Portable
32.50"
16.50"
18.00"
22.50"
Folding Portable High-Profile
Sampler Folding Portable
7.00"
16.50"
16.50"
13.25"
16.50"
11.00"
25.50"
Low Profile Portable
28.50"
16.50"
16.625"
14.00"
Mid MountStationary
28.00"
16.50"
14.00"
Front Mount Stationary
14.00"
16.50"
2.25"
Angled Divider Stationary
16.50"
2.25"
Vertical Divider Stationary
P r o d u c t S p e c i f i c a t i o n s
*One leg does not lock in a closed position due to short length of guard.
Original Folding Portable Sneeze guardModel # Nominal Length Overall Length Between Stands Weight Colors Available 0801 2 foot* 25.50” 20.50” 8 lbs. Black/Rich Gold 0901 3 foot* 34.75” 29.75” 9 lbs. Black/Rich Gold 1001 4 foot 46.75” 41.75” 10 lbs. Black/Rich Gold 1101 5 foot 58.75” 53.75” 13 lbs. Black/Rich Gold 1201 6 foot 70.75” 65.75” 14 lbs. Black/Rich Gold 1281 8 foot 94.75” 89.75” 18 lbs. Black/Rich GoldWhen ordering Rich Gold, change last digit to 2 for color selection.
FOLDING PORTABLE High-Profile: To order specify color & HP (to indicate high-profile stands) to above product number.
FOLDING PORTABLE Low-Profile: (11” clearance for young patrons) To order specify color & LP (to indicate low-profile stands) to above product number.
Mid Mount Stationary Sneeze guard 2091 2 foot 25.00” 21.00” 6 lbs. Black/Rich Gold 2101 3 foot 34.25” 30.25” 7 lbs. Black/Rich Gold 2201 4 foot 46.25” 42.25” 9 lbs. Black/Rich Gold 2301 5 foot 58.25” 54.25” 11 lbs. Black/Rich Gold 2401 6 foot 70.25” 66.25” 13 lbs. Black/Rich Gold 2481 8 foot 94.25” 90.25” 17 lbs. Black/Rich GoldWhen ordering Rich Gold, change last digit to 2 for color selection.
FRONT MOUNT STATIONARY: To order specify color & FM (to indicate front mount stands) to above product number. VERTICAL DIVIDER STATIONARY: To order specify color & DV (to indicate vertical divider stands) to above product number.ANGLED DIVIDER STATIONARY: To order specify color & DA (to indicate angled divider stands) to above product number.
Chafer Guard 1921 2 foot* 28.00” 23.25” 6 lbs. Black/Rich Gold 1931 3 foot 37.25” 30.50” 7 lbs. Black/Rich Gold 1941 4 foot 47.50” 41.75” 9 lbs. Black/Rich Gold 1951 5 foot 58.50” 53.75” 11 lbs. Black/Rich Gold 1961 6 foot 70.50” 65.75” 13 lbs. Black/Rich GoldWhen ordering Rich Gold, change last digit to 2 for color selection.
Sampler Folding Sneeze guard 6001 2 foot 25.50” 20.50” 6 lbs. Black 6101 3 foot 34.75” 29.75” 8 lbs. BlackAvailable in Black only.
Display Sneeze guard 0841 2 foot* 25.50” 20.50” 6 lbs. Black 0941 3 foot* 34.75” 29.75” 7 lbs. Black 1041 4 foot 46.75” 41.75” 9 lbs. Black 1141 5 foot 58.75” 53.75” 11 lbs. Black 1241 6 foot 70.75” 65.75” 13 lbs. BlackAvailable in Black only.
14.00"
18.375"
25.25"
Display Guard15.00"
27.50"
14.00"or
18.00"
Chafer Guard