snap-on heavy duty flyer - trucks, parts, service

Offer expires: OCTOBER 31, 2015Order now! Limited quantities available.

EPIQ™ 68" 10-DRAWER ROLL CAB

PAGE 12

1" DRIVE AIR IMPACT WRENCHPAGE 4

BATTERY SYSTEM TESTERPAGE 7

2

Standard HandleS80A (Standard) $149.95 $134.95SR80A (Quick Release) $164.95 $148.45SL80A (Long) $164.95 $148.45SLF80A (Extra Long) $209.95 $188.95SLX80A (Extra Long, Locking) $229.95 $206.95

Soft Grip HandleSHLF80A (Extra Long) $224.95 $202.46SHRLF80A (Extra Long, Quick Release) $234.95 $211.45

SHRLF80A

SN36

SHLF80A

SLX80A

SLF80A

SL80A

SR80A

S80A

1/2" Drive 36" Breaker Bar SN36 $182.00 $163.80

Locking Button Handles

L872RM $111.00 $99.90• 3/4" Drive 36" Knurled

L53HB $139.00 $125.10• 1" Drive 29" Plain

Sealed Ratchet Heads

L872 (3/4" Drive)$259.95 $233.95

L873 (1" Drive)$459.95 $413.95

L872RM

L872

10" Flat Tip Screwdriver w/ Instinct® HandleSGD10BR $33.25 $29.95• Hex bolster allows a wrench to be

used for added torque

• Dual pawl design with patented sealed head

• 7 teeth in contact with gear to provide strength and durability

• Up to 25% less ratch-eting arc to engage the next gear tooth

• Built for strength, preci-sion and durability

1/2" Drive Dual 80® Technology Based Ratchets

Spring Tools $20.65 $18.60SPRG625R (Red)

SPRG625G (Green)SPRG625O (Orange)

• Deep "V" and "C" grooves for pushing/pulling springs

Tire Valve Tools $16.70 $15.00TR107AR (Red)

TR107AG (Green)TR107AO (Orange)Combination Square w/

Protractor & Center HeadCOMBOSQ3 $346.00• Reversible Lock Bolt, Scriber, Spirit Level

in both Square Head and Protractor Head• Includes hard case with foam insert

2" - 6" Dia. Dial Bore GaugeGA2-6B $303.00 $272.70 • Features 11 contacts (.0005" grad.)

6" Dial Caliper

CAL6D $116.15

Electronic Micrometer

MIC0-1E (0-1") $151.80

Blue-Point® 9" Aluminum Lighted Level

TL900L $34.00 $30.60

Pliers Adjustable WrenchPWZ $115.00 $103.50• 3 1/2" Jaw Capacity

3/4" Drive Adjustable Click-Type Fixed Head Torque WrenchQD4R600 $799.95 $719.95• 120-600 ft. lbs. torque range and 43" length• Provides consistently accurate readings to ±4% clockwise and ±6%

counterclockwise from 20% of full scale to full scale• Sealed ratchet head is virtually maintenance free• Cannot be accidentally disassembled if wound down past scale

3/4" DriveAdjustableClick-Type Torque Wrench TQR600E $895.00 • 200-600 ft. lbs. torque range and 49" length• Sealed ratchet head is virtually maintenance free• Thumb screw-type adjustment is faster than cycling through a micrometer• Guard prevents setting from being changed accidentally• Cushion grip handle provides comfort and control• Non-reversible design for measuring torque in a clockwise direction only• Disassembles to 3 pieces for storage/transport (includes plastic case)

Individual Nut DriversNDD118BO (9/16" Orange handle) $24.95 $22.45NDD120BY (5/8" Yellow handle) $25.95 $23.35

Nut Drivers SetNDD900B $179.95 $161.95• Color coded handles for easy I.D.• Includes sizes 3/16"-1/2"

HAND TOOLS

Limited quantities. Participating Representative only. Offer expires October 31, 2015. Offer cannot be combined with any other trade in or discount. * Extended Credit (EC) payment example is based on: the purchase price less a trade-in or cash down payment in the amount stated below the payment example with the stated number of payments to be made, and example time price differential charge of 19.8%/yr (may be higher or lower based on

credit approval and/or state). Weekly payments are subject to business credit approval. Taxes and costs of financing, e.g. UCC costs extra. See important credit notice on back cover for additional terms and conditions.

3

Speed Open End / Ratcheting Box End Metric Wrench SetSRXRM710 $412.40 $371.15• Speed open end provides quick,

ratchet-like action• Flank Drive® wrenching system

on box end provides up to 15-20% more turning power with less risk of tool or fastener damage

• Up to 80 gear teeth for minimal movement in tight areas

• Box ends are offset 15˚ for clearance• 10-Piece set includes sizes 10–19 mm

4-Piece Ratcheting Box End Metric Wrench SetXDHRM604 $250.25 $225.25• 12-Point wrench set includes 10, 13, 15

and 17 mm sizes

Flank Drive® & Flank Drive® Plus Combination Wrenches • 12-point box end is set at 15˚ offset for

increased clearance• Flank Drive® grips the flats, providing

up to 20% more turning power than a conventional wrench

Flank Drive® PlusSOEX34 (1-1/16") $91.25 $82.15 SOEX36 (1-1/8") $109.00 $98.10SOEX38 (1-3/16") $112.00 $100.80SOEX40 (1-1/4") $123.00 $110.70

Flank Drive®

OEX34B (1-1/16") $83.25 $74.95OEX36B (1-1/8") $101.00 $90.90OEX40B (1-1/4") $117.00 $105.30OEX42B (1-5/16") $118.00 $106.20OEX48B (1-1/2") $154.00 $138.60

Heavy Duty Striking Pry Bars• Crown handle protects from off-center

hammer strikes• 10" handle for two-handed grip

30" Pry Bars $134.00 $120.60SPBH30R (30" Red) SPBH30O (30" Orange) SPBH30G (30" Green)

48" Pry Bars $178.00 $160.20SPBH48R (48" Red) SPBH48O (48" Orange) SPBH48G (48" Green)

54" Pry Bars $198.00 $178.20SPBH54R (54" Red)SPBH54O (54" Orange)SPBH54G (54" Green)

Punch & Chisel SetPPC710BK $227.95 $205.15• Includes assorted center, pin,

starter, and flat punches and chisels in kit bag

Pin Punch SetPPCL60BK $175.00 $157.50• Includes sizes

1/8" to 5/16"

Bearing SeparatorsCJ951 (4-1/2") $224.00 $201.60CJ952 (6-1/8") $384.00 $345.60

CJ953 (8-3/4") $1,070.00

$22.72**PER WEEK • 52 WEEKS

EC

TER

MS

Truck Wheel Seal Removal ToolSRT1 $147.95 $133.15• Remove seals intact without damaging the bearings• Use on steering, drive and trailer wheel seals

CJ951

OEX34B

Truck Anchor Pin & BushingPress KitTAP1 $346.95 $312.25• Designed to remove brake

anchor pins & bushings without removing wheel hubs on 16-1/2" Q type S-cam tractor & trailer brake systems from Dana Spicer®, Arvin Meritor® (Rockwell®), Eaton®, Timken® & Fruehauf® vehicles

Deep Hex Truck Slack Adjusters

• For brake service / slack adjuster installationHSA716 (7/16" Haldex®) $35.65 $32.10

BSA916 (9/16" Bendix®) $53.95

Brake Slack Adjuster Set BT4651 $79.95 $71.95• Use on Rockwell and Arvin Meritor slack adjusters

Gear Puller SetCJ2002 $609.90 $548.91 • Makes any of ten different pullers• For use on timing gears and carrier side bearings• 6 to 10 ton capacity

Complete Heavy Duty Bushing Driver SetA257 $929.00 $836.10• Includes large driver handle, large driver nut and

27 large adaptors (sizes 1-5/16" thru 2-15/16")

Basic Heavy Duty Bushing Driver SetA158B $249.00 $224.10• Includes eight basic adaptors for servicing

bushings on trucks, tractors and buses

HAND TOOLS



4

1/2" Drive Locking Impact Socket Extension Set303IMXL $182.00 $163.80• Pull back collar for fast & easy

attachment of sockets• Ideal for use on transmission bellhousing

bolts, transaxle and suspension service• Includes sizes 3-1/2", 5" and 10"

1" & 3/4" Drive 33mm 6-Point Deep Impact SocketsSIMML333 (1" Drive) $91.25 $82.15SIMML332 (3/4" Drive) $79.50 $71.55• 6" length

3/4" Drive 3/4" 12-Point Thin-Walled Impact SocketIMFDL242 $58.25 $52.40• Removes head bolts on Caterpillar

C12, C15, C16 & 3406E

3/4" Drive TORX® Impact SocketsT802E (T80) $62.00 $55.80• For Meritor® brakes

1" & 3/4" Drive Budd Wheel Impact Sockets• 1-1/2" Hex & 13/16" square dual openingBWD483 (1" Drive) $129.95 $116.95BWD482 (3/4" Drive) $98.60 $88.75

3/4" Drive 19mm Hex Bit SocketLAWM19E $67.25 $60.53

1/2" Drive 6-Point Impact Swivel Socket Sets

307IPLMY (Metric) $449.25 $404.33• Includes sizes 14-15, 17, 18, 19, 21 and 24 mm

307IPLY (Standard) $423.75 $381.38• Includes sizes 9/16"-3/4", 7/8"-15/16", & 1-1/8"

3/8" Drive Snap Ring Retention Socket Extensions Set204IMXA $96.75 $87.08• Includes sizes 1-3/4", 3", 6" & 11"

1/2" Drive 12-Point Deep Impact Socket Sets312SIMDM (Metric) $388.45 $346.60• 12-Piece set includes sizes 15-25 & 27 mm

313SIMD (Standard) $420.00 $378.00• 13-Piece includes sizes 1/2" to 1-1/4"

1/2" Drive 3/4" 6-Point Extra Deep Impact SocketS6224 $57.95 $52.15• 6" length for trucks using the 30/30 spring brake chamber

1/2" Drive Specialty Impact SocketsSpicer Drive Impact SocketS6260 (1/2", 12-Point) $52.95 $47.65• 8" length for removing spicer drive shaft bolts found on

Kenworth, Peterbilt and other applications

Head Bolt Impact SocketsS6160 (12mm, 12-Point, 8" length) $53.75 $48.35S6194 (12mm, 12-Point, 4-1/8" length) $48.00 $43.20• Reaches past cam and rocker assembly to service head bolts

U-Joint Strap Bolt Impact SocketS6213 (13mm, 12-Point) $51.95 $46.75• 8" length for removing U-Joint strap bolts found

on Volvo, Mack and other applications

Driveline Impact SocketS6197 (1/2", 12-Point) $44.95 $40.45• For Kenworth / Peterbilt drivelines

1/2" Drive 5/8" 12-Point Swivel Impact SocketIPRD20 $56.95 $51.25• Low profile 2" length for starter bolts found on

International, Caterpillar and Cummins engines

3/8" Drive 12-Point Shallow Swivel Impact Socket IPDF12A $40.00 $36.00• Full 30˚ swivel action

3/8" Drive Hose Clamp Socket Set204FIHC $92.20 $82.98• Sizes 7/16", 1/2", 8 & 10 mm• For extra long band clamps found on

Freightliner®, Peterbilt®, Kenworth®, International®, Caterpillar® Acert® and Cummins® ISX engines

1" Drive Air Impact WrenchesIM1800 $1,125.00 IM1800L (6" anvil) $1,125.00 • 1,800 ft. lb. max. torque output• 5,500 free speed RPM• 3 position speed control• Full power reverse

IM1800

312SIMDM

307IPLY

3/4" Drive Air Impact WrenchesMG1250 (Regular Anvil) $905.00MG1250P (Pinned Anvil) $905.00MG1250L (3" Anvil) $905.00MG1250XL (6" Anvil) $905.00• 1,200 ft. lb. max. torque output

Blue-Point 3/4" Drive Air Impact WrenchAT670 $660.00 $594.00• 1,050 ft. lbs. max. torque

Blue-Point® 1" Drive Impact Air WrenchAT1300A $1,745.00• 3,000 ft. lb. max. torque output• 4,000 free speed RPM• Pin clutch style impact mechanism

Blue-Point 1/2" Drive Air RatchetAT705B $245.00 $220.50• Delivers 50 ft. lb.

of maximum torque1/2" Drive Air

Impact WrenchesMG725 $490.00

MG725P (Pinned Anvil) $490.00MG725L (3" Anvil) $490.00

• 810 ft. lbs. max. torque

MG1250P

MG1250L

MG1250XL MG725LMG725P

1/2" Drive Compact Air Impact WrenchMG3255 $435.00• Lightweight (2.8 lbs.) with slim-style nose• 325 ft. lb. of max. torque• 9,500 free speed RPM

$23.89*PER WEEK • 52 WEEKS

EC

TER

MS $20.35*

PER WEEK • 104 WEEKS

EC

TER

MS

PNEUMATIC POWER TOOLS



5

3" Air Cut-Off ToolPT430 $269.00• 1 HP with 25,000

free speed RPM

4" Right AngleAir Cut-Off ToolPT490 $365.00• Instinct® side handle• 1 HP with 12,000 free speed RPM

1/2" CapacityReversible Air DrillPDR5000A $435.00• Reversible variable speed trigger

for more controlled, precise drilling

Heavy Duty Air Die GrindersPT400 $279.00PT400L (3-3/4" Long Shaft) $310.00PT410 (3" Right Angle) $330.00• 1.0 HP with 23,000 free speed RPM• 3-3/4" steel shaft for extra reach

PT400L

Right Angle Air Die GrinderPT450 (4-1/2")$330.00• 4-1/2"• 12,000 free speed RPM• Features Instinct® side handle

Blue-Point Heavy DutyAir HammerAT2050 $213.00 $191.70• 3,400 BPM

Blue-Point 3/8" Right Angle Air DrillAT811 $233.00 $209.70• Reversible drill features 0-55 in. lbs. torque• 0.25 HP with 1,320 free speed RPM

Reciprocating Air Saw w/ Dual-ChuckPTS1000 $309.00• 10,000 free speed SPM• Accepts both standard/reciprocating saw blades• Cuts 1/8" (3mm) thick mild steel

Super Duty Air HammerPH3050BR $399.00• 2,500 BPM• Variable speed soft touch

trigger and air regulator

Crud Thug® Removal Air ToolPT280THUGA $530.00• Quickly remove seam sealers, rust, paint etc.• Adjustable exhaust• 10-position power/speed regulator• Includes 1 fine wire wheel and 1 coarse wire wheel

3" Air Cut-Off ToolPT250A $249.00• 0.5 HP with 22,000 free speed RPM• 10-position

power/speed regulator

Air Die GrindersPT200A (Straight) $259.00PT200AL (10" Extended) $289.00PT210A (Right Angle) $310.00• 1/2 HP / 22,000 free speed RPM

Blue-Point®

6" Orbital Palm SanderAT406C $159.00 $143.10• Lightweight and durable• 0.25 HP with 12,000 free speed RPM

Blue-Point® Reciprocating Air SawAT192A $192.00 $172.80• 0.25 HP with 11,000 free speed SPM• Adjustable blade guard to control cutting depth• Includes one each bi-metal blades: 18TPI,

24TPI and 32TPI

Blue-Point® 4" Reversible Air Cut-Off Tool

AT154RA $299.95 $269.95• 0.7 HP with 13,000 free speed RPM

• 14.3" overall length for extended reach

Blue-Point® 1/4" Right Angle Mini Air Die GrinderAT109 $139.00 $125.10• 0.02 HP with 20,000 RPM

Air Hammer Bit SetPHG1055K

$218.00 $196.20• Set includes double bladed panel cutter, drift punch, flat

chisel, round hammer and tapered punch

PNEUMATIC POWER TOOLS



6

Leak Detector/ EVAP Smoke Machine

EELD100A $1,399.99

• Diagnostic Smoke® technology for EVAP testing

• Can diagnose 8 of the top 10 emission DTC codes

• UltraTraceUV® non-contaminating dye solution pinpoints leaks smoke alone can’t

2,250 Watt Power InverterEEPI2250 $535.00 $481.50• Delivers 2,250 W of continuous

power and 4,500 W peak power to run a wide variety of tools, electronics and appliances

• Hard-wire into tow trucks, construction, fleets and military vehicles


EC

TER

MS

CAT® Ultra SoftwareEEHD864024 (ACERT® '03 -'09) $999.99EEHD864027 (Electronic '90 -'03) $842.99

Detroit Diesel® Ultra SoftwareEEHD864015 (DDEC (II, III, IV and V) Engines '87-'06) $825.99EEHD864018 (DDEC 6, 10, 13 /Series 60®/MBE Engines '07-'13) $926.99EEHD864031 (MBE Engines: '01-'06 pre-EPA, '07 MBE 900 & 4000 systems) $449.99

Additional engine, transmission and brake software also available.

POWERFUL DIAGNOSTICS FOR COMMERCIAL VEHICLESFROM LIGHT DIESELS TO CLASS 8

HEAVY-DUTY TRUCKS


EC

TER

MS

Digital ImagerBK8000-55 $290.00 $263.90• 5.5 mm, Dual

View, 36" L• Gets into much

tighter spaces than standard 8.5mm imagers

• For use with BK5600, BK6500 and BK8000

Modular Test Leads KitMTTL800 $171.00 $153.90 • Includes back probes, modular

test leads, crocodile clips, piercing probes, grabbers, modular prods, springhooks in travel pouch

PRO-LINK® UltraEEHD184040 (Starter Kit) $3,349.99• Essential maintenance and repair functions: Read & clear fault codes, access trip data

to monitor vehicle & driver performance, create health reports, graph live data to verify performance and find tough problems and capture/playback live data recordings, convenient for road tests

• Coverage for engines, transmissions, ABS, instrument cluster, emissions, and more• 8-1/2" touchscreen automatically adjusts brightness for indoor/outdoor use• View, save & share results via HDMI, SD memory card, WiFi, Ethernet port & USB port• Starter Kit includes 8 ft data cable, 16-pin J1962 OBDII adapter, 9-pin Deutsch adapter,

6-pin Deutsch adapter, fault code guide book, lithium-ion battery, 120V AC power adapter and carrying case with cushioned foam organizer

BK8000

Digital Camera VideoscopesBK8000 (Wireless) $1,140.00 BK6500 (Wired) $850.00• Features 4.3" diameter touch-screen• Straight or 90˚ angle viewing with 36"

dual imager• Powered by rechargeable lithium batteries• Capture digital video and images with

internal memory or SD card• 3-MP rear-view camera (BK8000 only)• Transfer data to PC with USB port

PRO-LINK® Ultra Premium Software• Individual software suites

Navistar Maxxforce® Ultra V3 SoftwareEEHD865009 $874.99

LMT 2014 Ultra SoftwareEEHD865048 (Full Suite) $1,025.00

EEHD865048U (Update) $574.99


EC

TER

MS


EC

TER

MS

DIAGNOSTICS



Manual-Ranging MeterEEDM503D $172.00 $154.80• Dial selectable

ohms, AC/DC volts, AC/DC amps and diode functions

• Economical value with a great feature set

Elite True RMS Auto-Ranging MeterEEDM596EK $589.99 $530.95 • True RMS with color display• Measures AC/DC volts, AC/DC

millivolts, ohms, continuity, diode, microamps, milliamps, amps, hertz, capacitance and temperature

• Built-in automotive inductive pick-up for tach, duty cycle, dwell and pulse width tests

BackprobesMTTL7005PK $39.75• Color coded

for easy identification

7

6/12 or 12/24 Volt Battery ChargersEEBC400 (6 & 12 Volt) $619.99 $557.95EEBC400F (12 & 24 Volt) $649.99 $584.95• Fully automatic microprocessor-controlled operation,

20-second crank time plus a manual mode• For manual / automatic charging of standard

automotive, deep-cycle, AGM, and gel batteries• The EEBC400 has 4/10/50 Amp charging rates for

automotive shops• The EEBC400F has 4/10/25 Amp charging rates for

truck fleets and industrial vehicles

Battery System TestersEECS350 (Enhanced) $429.99 $386.99EECS750 (Advanced) $979.99 $881.99• Superior accuracy with CCA required input and conductance technology

for rendering battery, starter and charging system status• Tests batteries from 100-2000 CCA (see chart)• Displays battery condition, voltage and more• Features cable integrity technology and reverse polarity protection• Select from 7 languages for on-screen commands & reports

Enhanced Advanced

Model EECS350 EECS750

Display LCD backlit (3.1") Color (3.5" )Communication IR IR, USB Clamps Medium Large Cable length 4' Fixed 10' Replaceable CCA Range 100–1,700 100–2,000 Volts 6/8/12 6/12/24

Rating Systems SAE, EN, IEC, DIN, JIS SAE, EN, IEC, DIN, JIS

Battery Types Standard, AGM, EFB Standard, AGM, EFB Battery Packs No Yes Series/Parallel Display % of CCA • Displays State-of-Charge Graph • • Detects and Displays Bad Cell • • Poor Connection Detection • • Post Adaptors • • Surface Charge Warning •

Printer Optional IR or PC Integrated

Custom Shop Info on printouts • •

System Test Starting/charging/ ripple/voltage

Menu driven routine w/ ripple detection and graph

EECS350 EECS750

D-TAC Elite CoverEECS306C-CVR $91.50 $82.35• Optional protective

vinyl cover for D-TAC

D-TACTM Elite Diagnostic Tester & ChargerEECS306C $3,899.99 • The D-TAC Elite features a 6/12 volt diagnostic

charger, 12/24 volt battery, starting and charging system tester, engine starter and 60 amp maximum flash-reprogram

• DMM and cable voltage drop tester (with optional EECS306-4 Lead Set sold separately) tests low volt automotive, amps, ohms, diode and basic oscilloscope

• MicroVAT top analyzer can be removed to diagnose other vehicles during diagnostic charge session

• Features printer with customizable shop info• 3.5" large full color ¼" VGA display, color icons and

test result graphics

90-LED Underhood LED LightCTLUH761 $179.95• 800 lumens, ultra bright light features

high-impact housing and light tube, expandable 81" clamp, hook with peg and 10-minute low battery indicator

• Battery and charger not included

60-LED Cordless LightCTLU761 $89.95

• 540 lumens light features hook, high impact housing and 10-minute low battery indicator

• Battery and charger not included Blue-Point LED FloodlightECFLOOD $207.00 $186.30• 2,500 Lumens from 70 high output SMD LEDs• Rubber-edged aluminum frame• IP65 resistant to water and dust infiltration• 25' (7.6m) cord for excellent reach

Lithium Rechargeable Shop LightECFBARLED $135.00 $121.50• Bright, 500 Lumen output with 2 power levels• 3.7 V Lithium-ion battery

Blue-Point® USB Rechargeable Shop Light• 350 lumens light output• Lithium-ion battery provides 3 hours run time• Features 180˚ hinged magnetic base plus top

hook and includes USB cord and wall chargerECFBP6 $99.95 $89.95

Lithium-Ion Rechargeable LED FlashlightECF990R $249.95 $224.95• Shock-proof and water-resistant aluminum• 3.7 Volt, 2200mAh, 540 Lumens, 728' range


EC

TER

MS

DIAGNOSTICS & LIGHTING



8

Thunderbit®/High Speed Steel JobberLength 135° Split Point Drill Bit SetsDBTB129 $272.00 $244.80• 135° split points for easier drill starting without

the need for center punching• 29-Piece set includes sizes 1/16" to 1/2"

14.4V Micro-Lithium ScrewdriverCTS761 $359.95• 150 in. lbs. torque output• 1,400 RPM• 1/4" hex capacity• 2-speeds, 9-position

clutch and built-in LED light

• Includes two batteries, charger and tote

18 Volt Ni-Cad3/8" DriveImpact WrenchCT4418 $499.95• 180 ft. lbs. torque with

variable speed digital switch

• Built-in LED light• Includes two 18 volt

batteries, charger and tote

18 VoltNi-Cad1/2" DriveImpact WrenchCT6818 $599.95• 500 ft. lbs. torque

with variable speed digital switch

• Built-in LED light• Includes two 18 volt

batteries, charger and tote

18 Volt Lithium 1/2" Drive Impact WrenchCT8850 $719.95• 600 ft. lbs. torque with

variable speed digital switch• Built-in LED light• Includes two 18 volt batteries,

charger and tote

Quick Change Chuck VersionCT8850QCDB $379.95• 7/16" hex quick change chuck• Tool body only (no batteries included)

18 Volt Lithium 3/8" DriveImpact WrenchCT8810A $619.95• 325 ft. lbs. bolt breakaway torque• 230 ft. lbs. tightening torque• Built-in LED and battery fuel gauge• Includes two batteries,

4.0 Ah charger and tote

Quick Change Chuck VersionCT8810AQCDB $279.95• 1/4" hex quick change chuck• Tool body only (no batteries included)

14.4 Volt Micro-Lithium Cordless DrillCDR761A $359.95• 150 in. lb. torque, 9-position clutch,

battery fuel gauge, and 3/8" keyless chuck• Includes two batteries,

charger and tote

14.4V 3/8" Drive Micro-Lithium RatchetENJOY THE FREEDOM OF WORKING WITHOUT AN AIR SOURCE!CTR761B $389.95• 40 ft. lbs. torque output at

275 RPM• Features a built-in LED light,

battery fuel gauge, variable speed trigger

• Includes battery, charger and case

14.4V Micro-Lithium

Reciprocating SawCTRS761 $439.95

• 3,000 strokes per minute & 1/2" stroke length• Features dual chuck mechanism, adjustable depth guide,

integrated LED light and LED battery gauge indicator

18 VoltLithiumHammer DrillCDR8850H $619.95• 450 in. lb.

max torque• 1/2" chuck with

carbide jaws• Built-in LED light• 2 speed 22-position clutch• Includes two batteries, charger and tote

18V Monster-Lithium GrinderCTGR8850DB $479.95• 8,000 free speed RPM• 4.5" or 5" wheel size with 7/8" arbor• Tool only (no battery)

18VMonster-Lithium Reciprocating SawCTRS8850 $589.95• Features 2,400 strokes per minute and a fast 60 minute charge time• Includes one battery, charger and tote

CORDLESS POWER TOOLS



9

Fuel Pressure Test Set for Compucheck® EnginesEEDF501 $399.99 $359.95 • Includes male Compucheck test port for installa-

tion in vehicles without Compucheck test ports

Fuel Pressure Test Set for Duramax EnginesEEDF500 $344.00 $309.50 • Test diesel fuel

pressure and vacuum on GM® 6.6L Duramax engines

• Includes compound gauge with a 0-15 psi (0-100 kPa) pressure plus 0-30 in Hg vacuum scale and a protective rubber boot

Fuel Pressure Test Set for Ford Power Stroke® EnginesEEDF502 $397.00 $357.50• Helps prevent a lean

condition that may cause burning of injectors or scorched cylinders

Blue-Point® Diesel EGR & Induction Cleaning ToolEEDF400 $899.99 $854.95• Safely cleans the diesel EGR circuit, coolers,

intake, injectors, turbo charger and fuel system• Increases cetane & enhances fuel atomization for

more complete combustion• Lowers emissions, smooths rough idle, improves

fuel economy and performance• Optional adaptors available for Ford®, Duramax®,

Mercedes®, Cummins®, Isuzu®, BMW®, Audi® and VW® engines

• Cleaning solution required sold separately

Diesel EGR & Induction CleanerEEDF400-EGR $199.99 $179.99• Twelve 32 oz. bottles

Diesel Fuel Injection CleanerEEDF400-INJ $99.99 $89.99• Twelve 12 oz. bottles

EEDF400-EGR

EEDF400

EEDF400-INJ

Large Truck Cooling System Adaptor Set SVTA6100 $324.00 $291.60• Combine with SVTS263A

to provide virtually 100% truck coverage

Wheel-A-Matic Tandem Tracker Set

WAM1888L $172.00• Measures tracking of tandem axels

Air PoweredCooling SystemPressure Tester SVTS263A$253.00 $227.70 • Use shop air to test for leaks• Sensitive pressure regulation allows safe testing

of both small and large systems

0-800 PSI Diesel Compression GaugeEEPD500 $221.00 $198.90• 9 to 800 PSI (0 to 5,500 kPa)• Includes 18" hose with release valve

Wheel-A-Matic Turntable SetWAM1100 $1,926.50• 14" dia., 10,000 lbs.

per wheel capacity

Wheel-A-Matic Scribe Type Toe GaugesWAM0517 $422.10•5 & 10" Legs, 11" & 17" pointers• Pointers are adjustable to hub height

Wheel-A-Matic Truck Front Slip Plate SetWAM1841 $580.40 • Allows unrestricted

movement of front tires to make accurate adjustments

Wheel-A-Matic Trailer Kingpin ExtensionWAM1889 $258.60• Makes fast, accurate measurements from the kingpin

center to the trailer tandems

Wheel-A-Matic Tandem Tracker SetWAM1890 $395.75• Use with WAM1889 to measure tracking of tandem axles

Wheel-A-Matic Tandem Axle Spacing CaliperWAM1891 $205.80• Check spacing between axles of tractors and/or trailers

Wheel-A-Matic Magnetic Wheel Alignment GaugeWAM0684 $651.30• Camber: +8 degrees to -8 degrees• Caster: +14 degrees to -6 degrees

Fuel Disconnect Tool SetFDT1116 $139.95 $125.95• Straight & 90˚ for 11.8mm & 16mm fuel lines

Dual FootAir Chuck

GA359 $46.95 $42.25• Access hard to reach inner tandem wheels

• Tilt lock feature locks onto the valve

Aluminum Hose NozzleNOZZLEPG2 $69.95 $62.95• 2-way shut-off allows

spray pattern to remain the same when turning on/off


EC

TER

MS

SHOP EQUIPMENT



10

MHG5A $1,450.00• For use with MIG220,

FM140A & YA212AIND

MHG5B $1,450.00 • For use with MM140SL,

MM250SL & MM350XL

350A “Muscle MIG” WelderMM350XL $4,915.00


EC

TER

MS

Specifications MM350XL MM250SL MIG220

Weld Amps 350 270 220

Single Pass Thickness 7/16" 3/8" 5/16"

Detatchable Feeder Yes Yes No

Duty Cycle Rating 300A-100% 185A-100% 185A-60%

Input Voltage (A/C) 208/230 208/230 208/230

Optional TIG Pack FLEXTIG25 FLEXTIG25 CKSTP2125A

Optional Aluminum Spoolgun MHG5B MHG5B MHG5A

Cart Included Yes Yes Yes


EC

TER

MS 270A “Muscle MIG” Welder

MM250SL $3,760.00


EC

TER

MS 220A MIG Welder

MIG220 $2,535.00

Aluminum Spool Guns• Adds aluminum welding capabilities to MIG weldersMM250SL

Snap-on® MIG Welders have higher duty cycles at maximum amperage for longer continuous weld times and performance that surpasses the competition.

• Wire feed assembly features 800 in./min. delivery for consistent wire speeds

• Capacitor bank and diode set deliver consistent voltage and industry-leading smooth-arc characteristics

• All-copper wound, tapped transformer features Nomex® insulation and bolted laminations to provide precise voltage control and repeatable welds

Auto-Darkening Welding HelmetEFPGREENSKL $369.95 $332.95 • Features continuous 2" x 4" 4/9-13 Shade

external adjustable Auto-Darkening Filter integrated into the 180˚ passive lens

• External Grind Mode, Shade Sensitivity and Delay controls

• Lightweight, hi-impact with military grade anti-scratch coating

Plasma CuttersPLASMA60i $5,520.00PLASMA50 $4,555.00PLASMA30i $3,760.00• Compact torch handle for hard-to-reach areas


EC

TER

MS


EC

TER

MS

Specifications PLASMA60i PLASMA50 PLASMA30i

Max Output Amps Adjustable 20 to 55 30 or 50 Adjustable 5 to 25

Cut Thickness 3/4" 1/2" 3/8"

Sever Thickness 1" 3/4" 1/2"

Primary Input 208/230 V AC 208/230 V AC 115 or 230 V AC

Primary Input 40 A 30 A 30 A 115 V or 20 A 230 V

Duty Cycle Rating 60% @ 40 A 40% @ 50 A 60% @ 22 A

Min Compressed Air Req. 68 psi @ 7 CFM 88 psi @ 7 CFM 50 psi @ 7 CFM

Torch Cable Length 18' 18' 12'

Ground Cable Length 18' 18' 12'

WELDER & PLASMA CUTTER TECHNICAL SUPPORT

800-ABC-WELD

PLASMA50

PLASMA30i

PLASMA60i


EC

TER

MS

$1,380.00 DOWN PAYMENTOR TRADE-IN

Blue-Point®

Butane Blow Torch TORCH4 $60.95 $54.85• Flames reach 2,400˚ F• Great for light gauge silver

soldering, brazing, welding and electronic repair

Auto Darkening Welding Helmet w/ Grind FeatureEFP2MORBID $435.00 $391.50• Features sensitivity, delay controls, low battery

and grind flash warning• Automatic on/off with lithium Ion battery• Articulating headgear for maximum comfort/sizing• Fast protective lens change system• 40 square inches of viewing area• Includes clear shade #4, #9-13


EC

TER

MS

SHOP EQUIPMENT



11

11-Gallon Wet/Dry Shop VacuumYA1009SSA $675.00 $607.50• Features long-life 2 stage motor, EZ dump

drain hose and on-board tool storage• Includes 1.5" wet/dry tool set: hose with

swivel end, crevice tool, upholstery tool, round dusting tool, single bend wand, two straight extensions, floor tool, squeegee tool and tool adaptor

40" Heavy-Duty CreepersJCW70AR (Red) $248.00 $223.20JCW70ABL (Black) $248.00 $223.20• Features four 4" inline swivel casters

40" Heavy Duty Adjustable CreepersJCW75AR (Red) $270.00 $243.00JCW75ABL (Black) $270.00 $243.00• Features four 4" inline swivel casters

Adjustable Chair Back Seat CreepersJCW95AR (Red) $234.00 $210.60JCW95ABL (Black) $234.00 $210.60 • Adjusts from 14" to 19"

Fingernail BrushWOD1000 $7.60 $6.84

High VisibilityWrecker Gloves GLOVE504HL (L)GLOVE504HXL (XL)$72.50 $65.25• Same as GLOVE504B

in "hi-vis" yellow

Impact GlovesGLOVE306M (M) GLOVE306L (L)GLOVE306XL (XL)GLOVE306XX (XXL)$57.00 $51.30• Molded rubber

knuckles on top of hand

Padded Genuine Leather GlovesGLOVE700M (M)GLOVE700L (L)GLOVE700XL (XL)$50.95 $45.85• Durable synthetic

leather palm section with heavy padding reduces vibration from tools

Wrecker Gloves GLOVE504BL (L, Black) GLOVE504BXL (XL, Black) $72.50 $65.25• Extreme all-over protection• Cut resistant palm/thumb• Reflective accents

Hand & Tool Cleaning TowelsWOD5020 $20.90 $18.81• Contains lanolin and rust

preventatives

Cart Mounted Electric Pressure WasherSEPW1500USA $2,400.00• 2 HP, 1,500 PSI unit

includes 25' hose• Includes ceramic plunger

pump with stainless steel valves, trigger gun, chemical injection, adjustable pressure, adjustable 0-60° spray nozzle and GFCI 120 V protection with 35-ft. power cord

Adjustable Round Seat CreeperJCW90ABL $160.00 $144.00 • Adjusts from 14" to 19"

SHOP EQUIPMENT



Blue-Point 4-Ton Air/Hydraulic Long Chassis Service JackYA660C $2,650.00• Hydraulic pump mechanism is operated

by handle or foot pedal• Knob style load release in

42" handle end for precise control

• T-handle provides additional positioning assistance

Blue-Point® 22-Ton Air Operated Floor JackYA1731A $885.00 $796.50• Adjustable extension

screw raises saddle height

• Uses standard shop air (110 psi to 175 psi)

Blue-Point 1-Ton Wishbone Hydraulic Transmission JackYA727B $3,135.00 • For use on bus, truck, farm, automotive and

construction vehicles


EC

TER

MS


EC

TER

MS


EC

TER

MS

12

EPIQTM 37" 6-Drawer SideKIQTM Roll CartsKEMN361A1 (Stainless Steel Top) $5,295.00KEMN361A7 (Bedliner Top) $5,295.00 • Same 48" height as EPIQ roll cab• 8" deep top compartment for storage of larger items• InPulse™ drawers are easy to open/close and don't drift• ISO-Ride® 7x2" swivel-lock mag wheels with independent torsion

spring suspension roll smooth over rough surfaces• Six heavy duty drawers hold 227 lb per drawer• Measures: 37" W x 30" D x 48" H• Capacity: 6,027 cu. in.

EPIQTM 68" 10-Drawer Roll CabKETN682A0 $11,335.00• Three extra wide drawers at the top for the most often used tools• EPIQ™ strength features additional top, bottom and side support• InPulse™ drawers are easy to open/close and don't drift• ISO-Ride® 7x2" swivel-lock mag wheels with independent torsion spring suspension

roll smooth over rough surfaces• Measures: 68" W x 30" D x 48" H• Capacity: 45,147 cu. in.

73" 17-Drawer Roll CabKRA2423 $6,095.00• Two 50" extra wide drawers (5" and 3")• Measures: 73" W x 24" D x 39" H• Capacity: 31,237 cu. in.

Blue-Point® Heavy-Duty Workbench

BPWORKBENCH $515.00 $463.50

• Measures: 60" x 30" x 34"• Weight Capacity: 1,200 lb.

Color Options

(Bed-liner Lid)

Color Options

(StainlessSteel Lid)

Red

PBO

Red

PN

Extreme GreenPJJ

Extreme GreenPKG

Electric Orange

PJK

Electric OrangePKH

Gloss BlackPC

Gloss BlackPFI

Royal BluePCM

Royal BluePET

Candy AppleRedPJH

Candy AppleRedPPS

Red

PBO

Flat BlackPOT

Extreme GreenPJJ

Electric Orange

PJK

Gloss BlackPC

Royal BluePCM

Candy AppleRedPJH

KETN682A0PJJ

Red

PBO

Flat BlackPOT

Extreme GreenPJJ

Electric Orange

PJK

Gloss BlackPC

Royal BluePCM

White

PU

KRA2423PJK

KEMN361A1PBO

KEMN361A7PN


EC

TER

MS



EC

TER

MS

$2,83 3.75 DOWN PAYMENTOR TRADE-IN


EC

TER

MS


HD2015While every attempt is made to ensure accuracy, errors during publication can occur. Product features and specifications can change. Pricing can change. Pricing is for U.S. market only. Snap-on and Blue-Point are trade marks, registered in the United States and other countries, of Snap-on Incorporated. ©Snap-on Incorporated 2015. All rights reserved. All other marks are trade marks of their respective holders.

Important Credit Notice: Please be aware that the weekly payment is an estimate only and may not apply to you. Your actual payment may be different than the estimated financing payment shown. All credit sale con-tracts are subject to approved credit and the terms of the standard Snap-on Credit credit sales contract form. Not all applicants will qualify. Taxes, installation and costs of financing, such as charges for filing UCC state-ments, are extra. Finance charges begin accruing at contract inception. Weekly payments shown are based on suggested list prices and your price may vary. Terms and finance charge rates may vary and such terms are subject to change without notice. In the event you fail to make payments when due, the terms of the contract will apply and late charges may be due. Please contact us regarding finance terms and restrictions.


credit approval and/or state). Weekly payments are subject to business credit approval. Taxes and costs of financing, e.g. UCC costs extra. See important credit notice below for additional terms and conditions.

TOOL STORAGE

snap-on heavy duty flyer - trucks, parts, service

Documents