sms scientific bulletin - july 2013€¦ · (2013). th yang and sj lue, “ modeling sorption...
TRANSCRIPT
![Page 1: SMS Scientific Bulletin - July 2013€¦ · (2013). TH Yang and SJ Lue, “ Modeling sorption behavior for ... Y Peng, and N Yildirim , “Polymer nanocomposites from the surface](https://reader035.vdocuments.mx/reader035/viewer/2022071215/60460254f5b6a4392651b5ba/html5/thumbnails/1.jpg)
P-SCI-312 v1.0 July2013
July 2013
SMS instruments are used over a wide range of disciplines. To keep abreast with
cutting edge research using dynamic vapor sorption and inverse gas chromatography, SMS regularly
reviews the literature. The below papers represent recent peer-reviewed articles utilizing gravimetric vapor
sorption or inverse gas chromatography.
DVS Articles: R Wimmer, O Klausler, and P Niemz, “Water sorption
mechanisms of commercial wood adhesive films” Wood
Science Technology, ONLINE ONLY (2013).
A Lafontaine, M Sanselme, Y Cartigny, P Cardinael, and G
Coquerel, “Characterization of the transition between the
monohydrate and anhydrous citric acid” Journal of
Thermal Analysis and Calormetry, 112: 307-315 (2013).
BA Keating, CAS Hill, DY Sun, R English, P Davies, and C
McCue, “The water vapor sorption behavior of a
galactomannan cellulose nanocomposite film analyzed
using parallel exponential kinetics and the Kelvin-Voigt
viscoelastic model” Journal of Applied Polymer Science,
129(4): 2352-2359 (2013).
M Minelli, K Friess, O Vopicka, and MG De Angelis,
“Modeling gas and vapor sorption in a polymer of intrinsic
microporosity” Fluid Phase Equilibria, 347: 35-44 (2013).
N Yazdanpanah, and TAG Langrish, “Mathematical
modeling of the heat and moisture diffusion in a dairy
powder particle with crystallisation phase change within
the particle matrix” International Journal of Heat and Mass
Transfer, 61: 615-626 (2013).
KS Mikkonen, J Schmidt, AH Vesterinen, and M Tenkanen,
“Crosslinking with ammonium zirconium carbonate
improves the formation and properties of spruce
galactoglucomannan films” Journal of Materials Science, 48
(12): 4205-4213 (2013).
E Olsson, MS Hedenqvist, C Johansson, and L Jarnstrom,
“Influence of citric acid and curing on moisture sorption,
diffusion and permeability of starch films” Carbohydrate
Polymers, 94(2): 765-772 (2013).
Q Zhang, LY Lu, WJ Dai, and XF Mei, “New polymorphs of
Huperzine A: preparation, structures, and physicochemical
properties of anhydrous crystal forms” Crystal Growth &
Design, 13(5): 2198-2207 (2013).
G Klinzing and A Zavaliangos, “Understanding the effect of
environmental history on bilayer tablet interfacial shear
strength” Pharmaceutical Research, 30(5): 1300-1310
(2013).
O Vopicka, K Friess, V Hynek, P Sysel, M Zgazar, M Sipek, K
Pilnacek, M Lanc, JC Jansen, CR Mason, and PM Budd,
“Equilibrium and transient sorption of vapours and gases
in polymer of intrinsic microporosity PIM-1” Journal of
Membrane Science, 434: 148-160 (2013).
S Kanehashi, Y Tomita, K Obokata, T Kidesaki, S Sato, T
Miyakoshi, and K Nagai, “Effect of substituted groups on
characterization and water vapor sorption property of
polyhedral oligomeric silsequioxane (POSS)-containing
methacryl polymer membranes” Polymer, 54(9): 2315-
2323 (2013).
JJ Kochumalayil, Q Zhou, W Kasai, and LA Berglund,
“Regioselective modification of a xyloglucan hemicellulose
for high-performance biopolymer barrier films”
Carbohydrate Polymers, 93(2): 466-472 (2013).
A Gorska, K Szulc, M Wirkowska, and J Brys, “The influence
of trehalose-maltodextrin matrices on thermal and
sorption properties of spray-dried beta-lactoglobulin-
vitamin D-3 complexes” Journal of Thermal Analysis and
Calorimetry, 112(1): 429-436 (2013).
QX Ma, H He, and C Liu, “Hygroscopic properties of oxalic
acid and atmospherically relevant oxalates” Atmospheric
Environment, 69: 281-288 (2013).
SMS
Scientific
Bulletin
![Page 2: SMS Scientific Bulletin - July 2013€¦ · (2013). TH Yang and SJ Lue, “ Modeling sorption behavior for ... Y Peng, and N Yildirim , “Polymer nanocomposites from the surface](https://reader035.vdocuments.mx/reader035/viewer/2022071215/60460254f5b6a4392651b5ba/html5/thumbnails/2.jpg)
P-SCI-312 v1.0 July2013
JR O’Dea, MN Economou, and SK Buratto, “Surface
Morphology of Nafion at Hydrated and Dehydrated
Conditions” Macromolecules, 46(6): 2267-2274 (2013).
T Yokota, S Kato, J Seo, S Chino, and J Kim, “Influence of
water content in sub-flooring materials using adhesive on
chemical compounds emission” Journal of Adhesion
Science and Technology, 27(5-6): 648-658 (2013).
Y Znamenskaya, J Sotres, S Gavryushov, J Engblom, T
Arnebrant, and V Kocherbitov, “Water sorption and glass
transition of pig gastric mucin studied by QCM-D” Journal
of Physical Chemistry B, 117(8): 2554-2563 (2013).
GD Wang, JYY Heng, and DR Williams, “Dilatometry of
powder compacts – Characterizing amorphous-crystalline
transformations” Powder Technology, 236(1): 12-16 (2013).
ME Sormoli, D Das, and TAG Langrish, “Crystallization
behavior of lactose/sucrose mixtures during water-
induced crystallization” Journal of Food Engineering,
116(4): 873-880 (2013).
MJ Akhtar, M Jacquot, M Jamshidian, M Imran, E Arab-
Tehrany, and S Desobry, “Fabrication and physicochemical
characterization of HPMC films with commercial plant
extract: Influence of light and film composition” Food
Hydrocolloids, 31(2): 420-427 (2013).
A Ciurzynska, A Lenar, and P Kawka, “Influence of chemical
composition and structure on sorption properties of
freeze-dried pumpkin” Drying Technology, 31(6): 655-665
(2013).
TH Yang and SJ Lue, “Modeling sorption behavior for
ethanol/water mixtures in a cross-linked
polydimethylsiloxane membrane using the Flory-Huggins
equation” Journal of Macromolecular Science B, 52(7):
1009-1029 (2013).
G Aguirre-Alvarez, T Foster, and SE Hill, “Modelling of
isotherms and their hysteresis analysis in gelatin from
different sources” CyTA – Journal of Food, 11(1): 68-74
(2013).
RGM van der Sman, “Moisture sorption in mixtures of
biopolymer, disaccharides and water” Food Hydrocolloids,
32(1): 186-194 (2013).
IGC Articles: K Stank and H Steckel, “Physico-chemical characterisation
of surface modified particles for inhalation” International
Journal of Pharmaceutics, 448: 9-18 (2013).
DJ Gardner, M Blumentritt, A Kiziltas, EE Kiziltas, Y Peng,
and N Yildirim, “Polymer nanocomposites from the surface
energy perspective: A critical review” Reviews of Adhesion
and Adhesives, 1(2): 175-215 (2013).
K Seidenberger, F Wilhelm, J Haußmann, H Markötter, I
Manke, and J Scholta, “Grand canonical Monte Carlo study
on water agglomerations within a polymer electrolyte
membrane fuel cell gas diffusion layer” Journal of Power
Sources, 1239: 628-641 (2013).
LL Skovbjerg, DV Okhrimenko, J Khoo, KN Dalby, T
Hassenkam, E Makovicky, and SLS Stipp, “Preferential
Adsorption of Hydrocarbons to Nanometer-Sized Clay on
Chalk Particle Surfaces” Energy and Fuels, in press (2013).
N Arsalan, SS Palayangoda, DJ Burnett, JJ Buiting, and QP
Nguyen, “Surface energy characterization of sandstone
rocks” Journal of Physics and Chemistry of Solids, 74: 1069-
1077 (2013).
N Arsalan, SS Palayangoda, DJ Burnett, JJ Buiting, and QP
Nguyen, “Surface energy characterization of carbonate
rocks” Colloids and Surfaces A, 436: 139-147 (2013).
M Krolikowska, M Karpinska, and M Krolikowski,
“Measurements of activity coefficients at infinite dilution
for organic solutes and water in N-hexylisoquinolinium
thiocyanate using GLC” Journal of Chemical
Thermodynamics, 61(1): 1-7 (2013).
OK Duaij, A Alghamdi, and ZY Al-Saigh, “Solubility and
surface thermodynamics of conducting polymers by IGC.
III: Polpyrrole chloride” Journal of Chromatography A,
1291: 137-145 (2013).
E Csiszar, E Fekete, A Toth, E Bandi, B Koczka, and I Sajo,
“Effect of particle size on the surface properties and
morphology of ground flax” Carbohydrate Polymers, 94(2):
927-933 (2013).
K Czech and PM Slomkiewicz, “Determination of
adsorption isotherms of chlorinated hydrocarbons on
halloysite adsorbent by IGC” Journal of Chromatography A,
1288:96-100 (2013).
![Page 3: SMS Scientific Bulletin - July 2013€¦ · (2013). TH Yang and SJ Lue, “ Modeling sorption behavior for ... Y Peng, and N Yildirim , “Polymer nanocomposites from the surface](https://reader035.vdocuments.mx/reader035/viewer/2022071215/60460254f5b6a4392651b5ba/html5/thumbnails/3.jpg)
P-SCI-312 v1.0 July2013
M Kasperkowiak, J Kolodziejek, B Strzemiecka, and A
Voelkel, “Effect of impregnating agent and relative
humidity on surface characteristics of sorbents
determined by IGC” Journal of Chromatography A, 1288:
101-104 (2013).
P Twu, JL Anderson, TW Stephens, A Wilson, WE Acree, and
MH Abraham, “Correlation of the solubilizing abilities of 1-
butyl-1-methyl-pyrrolidinium
Tris(pentafluoroethyl)trifluorophosphate, 1-butyl-1-
methylpyrrolidinium triflate and 1-methoxyethy-1-
methylmorpholinium
tris(pentafluoroethyl)trifluorophosphate” Journal of
Solution Chemistry, 42(4): 772-799 (2013).
VY Gus’kov, FK Kudasheva, and GB Bogolyuk, “Second virial
coefficients of adsorption isotherms of organic molecules
on porous polymers” Russian Journal of Physical Chemistry
A, 87(5): 879-881 (2013).
J Kolodziejek, A Voelkel and K Heberger, “Characterization
of hybrid materials by means of IGC and chemometrics”
Journal of Pharmaceutical Sciences, 102(5): 1524-1531
(2013).
A Marciniak and M Wlazlo, “Activity coefficients at infinite
dilution and physicochemical properties for organic
solutes and water in the ionic liquid 1-(2-methyoxyethyl)-
1-methylpyrrolidinium
trifluorotris(perfluoroethyl)phosphate” Journal of
Chemical Thermodynamics, 60: 57-62 (2013).
P Lazar, F Karlicky, P Jurecka, M Kocman, E Otyepkova, K
Safarova, and M Otyepka, “Adsorption of small organic
molecules on graphene” Journal of the American Chemical
Society, 135(16): 6372-6377 (2013).
S Jaffari, B Forbes, E Collins, DJ Barlow, GP Martin, and D
Murnane, “Rapid characterization of the inherent
dispersibility of respirable powders using dry dispersion
laser diffraction” International Journal of Pharmaceutics,
447(1-2): 124-131 (2013).
J Camacho, E Diez, G Ovejero, and I Diaz, “Thermodynamic
interactions of EVA copolymer-solvent systems by IGC
measurements” Journal of Applied Polymer Science, 128(1):
481-486 (2013).
AS Reddy, S Ramanaiah, and KS Reddy, “Hansen solubility
parameters of cellulose acetate proprionate-
poly(caprolactone)diol blend by using IGC” International
Journal of Polymer Analysis and Characterization, 18(3):
172-180 (2013).
AN Genkin, YV Khoroshavina, GA Nikolaev, and AP
Voznyakovskii, “The thermodynamics of dissolution of low-
molecular-mass compounds in polymethyl[2’-(3-
trifluoromethyl-2,2,3-trifluorocyclobutyl)ethyl]siloxane
studied by IGC” Polymer Science Series A, 55(4): 218-224
(2013).
JAF Gamelas, GV Duarte, and PJ Ferreira, “IGC and XPS of
extracted kraft pulps” Holzforschung, 67(3): 273-276
(2013).
Q Wang, YL Chen, LS Deng, J Tang, and ZF Zhang,
“Determination of the solubility parameter of ionic liquid
1-allyl-3-methylimidazolium chloride by IGC” Journal of
Molecular Liquids, 180: 135-138 (2013).
S Ramanaiah, AS Reddy, and KS Reddy, “Hansen solubility
parameters of cellulose acetate butyrate-
poly(caprolactone) diol blend by IGC” Polymer Bulletin,
70(4): 1303-1312 (2013).
MJ Davies, TD Kerry, L Seton, MF Murphy P Gibbons, J Khoo,
and M Naderi, “The crystal engineering of salbutamol
sulphate via simulated pulmonary surfactant monolayers”
International Journal of Pharmaceutics, 446(1-2): 34-45
(2013).
C Panayiotou, “Polymer-polymer miscibility and partial
solvation parameters” Polymer, 54(6): 1621-1638 (2013).
A Tamayo, F Rubio, JL Oteo, and J Rubio, “Influence of
milling in the surface energy of glass tile frits” Boletin de la
Sociedad Espanola de Ceramica y Vidrio, 52(2): 55-62
(2013).
G Djouani, MM Chehimi, and K Benzarti, “Interactions of
fully formulated epoxy with model cement hydrates”
Journal of Adhesion Society and Technology, 27(5-6): 469-
489 (2013).
N Cordeiro, A Ashori, Y Hamzeh, and M Faria, “Effects of
hot water pre-extraction on surface properties of bagasse”
Materials Science & Engineering C, 33(2): 613-617 (2013).
![Page 4: SMS Scientific Bulletin - July 2013€¦ · (2013). TH Yang and SJ Lue, “ Modeling sorption behavior for ... Y Peng, and N Yildirim , “Polymer nanocomposites from the surface](https://reader035.vdocuments.mx/reader035/viewer/2022071215/60460254f5b6a4392651b5ba/html5/thumbnails/4.jpg)
SMS
Scientific
Bulletin
Head Office:
Surface Measurement Systems, Ltd
5 Wharfside, Rosemont Road
London HA0 4PE, UK
Tel: +44 (0)20 8795 9400
Fax: +44 (0)20 8795 9401
Email: [email protected]
United States Office:
Surface Measurement Systems, Ltd, NA
2125 28th
Street SW, Suite I
Allentown PA, 18103, USA
Tel: +1 610 798 8299
Fax: +1 610 798 0334
Email: [email protected]
New SMS Publications: Journal Articles
“Effect of Processing Route on the Surface Properties of
Amorphous Indomethacin Measured by Inverse Gas
Chromatography” AAPS PharmSciTech, 13(4): 1511-1517
(2012).
Application Notes
“Investigation of Channel Hydrate Formation and Loss
using the DVS” DVS Application Note 59.
Upcoming Conferences: IFT Meeting: Chicago, IL, USA; 13-16 July 2013; Exhibitor.
Controlled Release Society: Honolulu, HI, USA; 21-24 July
2013; Exhibitor and Presenter.
Hairs 2013: Lubeck, Germany; 04-06 September 2013;
Exhibitor and Presenter.
UK Pharm Sci Fair: East Midlands, UK; 01 September 2013;
Exhibitor and Presenter.
6th
International Conference on Carbon Nanoparticle:
Dresden, Germany; 22-25 September 2013; Exhibitor and
Presenter.
SMS Training: SMSNA Office: 17 September 2013 (DVS) and 18 September
2013 (IGC/SEA); Email [email protected] for details.
SMSUK Office: 10 September 2013 (DVS); 11 September
2013 (IGC/SEA); Email [email protected] for details.