smart plant review tips
DESCRIPTION
Smart Plant Review TipsLearn How To Use Smart Plant Review SoftwareTRANSCRIPT
Piping Design http://www.azpiping.com
Smart Plant Review Tips
This report was downloaded from http://www.Azpiping.Com/Guide
Brought to you by Hung Hong
Website, Click Here to visit
I. Layout
Here is typical layout.
You can display or hidden any window by right click at toolbar then select menu you want or using short cut key
Piping Design http://www.azpiping.com
II. Change background color
View->Setting->Edit then select color you like.Click OK to finish
III. Zooming in, zoom out on an item.
1. You can use zoom in and zoom out menu at toolbar
2. In Lateral Mode
Piping Design http://www.azpiping.com
If you slide the “perspective angle” down, the view cone angle will increase
3. In Encircle Mode
If you slide the “encircle radius” down, radius will increase
4. Other ways
Piping Design http://www.azpiping.com
-Moving the eye-point closer to the object. Drag the View Cone on the Plan View - Other ways, on the Main View Window, move forward by dragging mouse –up while holding down the left mouse button. You need to active forward/back/left/right icon
IV. Adjusting the View Cone
1. Adjust Far Clipping Plane - Left click outside the view cone - Drag the mouse to desired position of far clipping plane and accept by clicking on left button again. 2. Adjust Near Clipping Plane - Left click outside the view cone, - Check if the far clipping plane can be moved -Right mouse click and then drag the mouse to desired position of near clipping plane and accept by clicking on left button again.
Piping Design http://www.azpiping.com
V. Rotation around an item
Follow 4 steps below:
1. Click on View Menu -> Place -> Centerpoint Only
2. Double-Left Click on the item -> Left Click. The item will be placed at center of main view window
3. Click on Rotate button and the Encircle button
Piping Design http://www.azpiping.com
4. Now, you can start rotating around the item in the main window by dragging mouse –up-down-left-right while holding down the left mouse button.
VI. Viewing Model Attributes
-Click on the Auto-Highlight icon, -Click on the item and the attributes will be displayed on the lower pane.
VII. Display Sets
-You can define the collection by file, by level, by color, by line-id, by equipment number or any attribute and any combination of attributes. - You can change color, hide, unhide and etc.
1. Create New Display Set.
Clicking on Tools -> Display Set -> New -> Display Set
Piping Design http://www.azpiping.com
Key in name -> Edit
Click on Insert
Select critical in the drop down menu, eg
Then click Ok->OK to finish
2. Save and Recall
Piping Design http://www.azpiping.com
If you want to recall display window later, you need to use Save and Recall Views
-Click View Menu - Select Save and recall View
- Click on “Add Current View” - Or “Create Group” if you need to group all similar saved views
To Recall View -Click on Save and Recall Views again - Highlight Saved View to Recall -Click on Recall View
VIII. Measuring Distances
Piping Design http://www.azpiping.com
Or go to Tools -> Measure -> Snaplock Or Click on Snaplock Measurement icon
First Point Click on Snaplock Measurement Icon ( Or press F8 ) -Double click near first reference point -If Red box is the desired reference point, Left Click again to accept position. -if not, right-mouse click to reset and move the red box to other positions -Once the reference point is accepted, a blue box will be placed. Second point: -Click on Snaplock Measurement Icon ( Or press F8 ) - Double click near second point -If Red box is the desired reference -If not, right-mouse click to reset and move the red box to other positions
Delete Measurements -Go to “Tools” - Select “Measure” -Select “Delete All Measurements” ( or Ctr+Alt+M)