Bluetooth UHF RFID Reader

Smart -R400

User friendly Manual

1. Smart-R400 SPEC

EPC Gen2(ISO 18000-6C)

860MHz to 960MHz (Customizable)

27dBm±1dBm(0.5W)

5dBm to 27dBm(1dB step)

6 (Korea), 50(USA), 4(EUROPE)

600KHz (Korea, EUROPE), 500KHz(USA)

< 0.4 seconds

PR-ASK

5pin USB (chargeable thru USB)

Bluetooth (SPP Baud rate: 115200bps )

850mAh Li-ion Battery (3.7V)

90mm x 45mm x 15mm

20°C to 70°C

-10°C to 50°C

KCC, FCC, CE- on going

- Protocol

-Frequency

-Max. Tx Power

-Power Control

-Hopping Channels

-Channel Spacing

-Channel Dwell time

- Modulation Method

- Interface

-Battery

- Dimension

- Storage Temperature

- Operating Temperature

- Certification

2. Component of Smart-R400

Smart-R400 RFID Reader

Device Manual Micro USB 5Pin to USB

Cable

Bluetooth LED

Tag Read Indicator

Power button

Battery Status LED,

Low-battery LED

Necklace hole

Power LED

Left side

Left side

Brand logo

Customizable

Reset button

Top side

Right side

RFID Ant Position

Battery Position

Bottom/Micro USB

3. Appearance of Smart R-400

Power ON/OFF Press more than 2 second, power ON/OFF

Charge Description and Alarmed lack of Bettary LED

Red light on during battery charging, Green light on after Full Charged,

Lack of battery when the blinking Red lights.

Power ON Display and RFID reading Display process

LED

When power ON, Green light ON. The Green LED blinking, When activate the

RFID Tag Reading.

Bluetooth Connection Display LED

The Blue LED ON, When connect Smart Phone and Bluetooth.

Reset Button

Battery Charge Connector Micro USB 5PIN connector

Status display LED of RFID reading

The Green LED blinking, When activate the RFID Tag Reading.

3. Description

4. System Composition Diagram Bluetooth Mode

4. System Composition Diagram USB Mode

☞ Demo Application File Name.

- Reader@Express V3.6.3 for Windows.zip

☞ Operating System

- Window 7 32bit

5. How to use on PC (PC Mode)

1. Smart R-400 Device ON 2. Control Panel > Device and Printer > Additional device > Choose the “Blue Angel” or “SmarTerminal” Device

Windows 7 (32bit)

3. Pin Number is “0000” 4. Check the connection with Bluetooth

Windows 7 (32bit)

5. Check the Port Number (Will need it)

Windows 7 (32bit)

6. Run the

“Reader@Express V3.6.3 for Windows”

Windows 7 (32bit)

6. Choose the Port Number (The Top of the Left

side), Confirm the RFID activation.

Check the USB Box.

And reset R400 device and program.

7. Set up USB Mode (in COM port box)

Play “reader program”

Windows 7 (32bit)

USB

Caution

– Set POWER level less than 27 from Combo box and use.

– Please do not assign USB COMport number over comport # 10,

the application many not recognize the device if comport number is

over 10. (11,12,13,ete..)

– There’s some USB compatibility issue with Windows XP at the

moment, we are working on it now. (Will be revised)

Windows 7 (32bit)

☞ Demo Application File Name.

- 9.4.4 Android(Bluetooth) Host Library SDK for Impinj.zip

☞ Operating System

- Android

5. How to use on Android (BT Mode)

1. Smart R-400 Device ON

• This Application is not on the Android Market because it’s SDK sample program for developer.

User can install it from PC by following instruction.

2. Prepare your Android Smart phone and its USB data

cable. Down load USB driver from your Smart phone

manufacturer web page and install it on your PC.

Android

3. Connect your Smart Phone to

PC thru data cable 4. Makes “APK” Folder in the Android phone folder,

added ‘ReaderApiBlueDemo.apk’.

Android

5. File manager > APK Folder 6. Down load ‘apk’ file.

Android

7. Search and select Bluetooth

Android

8. Pin cord “0000” 9. Inventory Click 10. RF Tag Reading > STOP

Android

0000