8/12/2019 Slope Stability-Charts or Stability Numbers

1/2

1

The University of Texas Department of Civil EngineeringProfessor Stephen G. Wright

SLOPE STABILITY - CHARTS OR STABILITY NUMBERS

Bell, James M. (1966) "Dimensionless Parameters for Homogeneous Earth Slopes," Journal of

the Soil Mechanics and Foundations Division, ASCE, Vol. 92, No. SM5, September, pp. 51-65.

Bell, James M. (1968) Closure to "Dimensional Parameters for Homogeneous Earth Slopes,"

Journal of the Soil Mechanics and Foundations Division, ASCE, Vol. 94, No. SM3, May, pp.

763-766.

Bishop, A.W. and Morgenstern, Norbert (1960) "Stability Coefficients for Earth Slopes,"

Geotechnique, Institution of Civil Engineers, London, Vol. 10, No. 4, December, pp. 129-150.

Cousins, Brian F. (1978) "Stability Charts for Simple Earth Slopes," Journal of the Geotechnical

Engineering Division, ASCE, Vol. 104, No. GT2, February, pp. 267-279.

Desai, Chandrakant S. (1977) "Drawdown Analysis of Slopes by Numerical Method,"Journal of

the Geotechnical Engineering Division, ASCE, Vol. 103, No. GT7, July, pp. 667-676.

Duncan, J.M. and Buchignani, A.L. (1975) An Engineering Manual for Slope Stability Studies,

Department of Civil Engineering, University of California, Berkeley, March, 83 p.

Ellis, Harold B. (1973) "Use of Cycloidal Arcs for Estimating Ditch Safety," Journal of the Soil

Mechanics and Foundations Division, ASCE, Vol. 99, No. SM2, February, pp. 165-179.

Giger, Max W. and Krizek, Raymond J. (1976) "Stability of Vertical Corner Cut withConcentrated Surcharge Load," Journal of the Geotechnical Engineering Division, ASCE, Vol.

92, No. GT1, January, pp. 31-40.

Huang, Yang H. (1977) "Stability Coefficients for Sidehill Benches," Journal of the Geotechnical

Engineering Division, ASCE, Vol. 103, No. GT5, May, pp. 467-481.

Huang, Yang H. (1978) "Stability Charts for Sidehill Fills," Technical Note, Journal of the

Geotechnical EngineeringDivision, ASCE, Vol. 104, No. GT5, May, pp. 659-663.

Hunter J. H., and R. L. Schuster, "Stability of Simple Cuttings in Normally Consolidated Clays,"

Geotechnique, Institution of Civil Engineers, Great Britain, Vol. 18, No. 3, Sept., 1968, pp. 372-378.

Janbu, Nilmar (1954) "Stability Analysis of Slopes with Dimensionless Parameters," Soil

Mechanics Series No. 46, Harvard University, January, 81 p.

8/12/2019 Slope Stability-Charts or Stability Numbers

2/2

2

Janbu, Nilmar (1967) Discussion of paper "Dimensionless Parameters for Homogeneous Earth

Slopes," by Bell,Journal of the Soil Mechanics and Foundations Division, ASCE, Vol. 93, No.

SM6, November, pp. 367-374.

Lo, Kwan Yee (1965) "Stability of Slopes in Anisotropic Soils," Journal of the Soil Mechanics

and Foundations Division, ASCE, Vol. 91, No. SM4, July, pp. 85-106.

Morgenstern, Norbert (1963) "Stability Charts for Earth Slopes During Rapid Drawdown,"

Geotechnique, Institution of Civil Engineers, London, Vol. 13, No. 2, June, pp. 121-131.

Prater, Edward G. (1979) "Yield Acceleration for Seismic Stability of Slopes," Technical Note,

Journal of the Geotechnical Engineering Division, ASCE, Vol. 105, No. GT5, May, pp. 682-

687.

Spencer, E. (1967) "A Method of Analysis of the Stability of Embankments Assuming Parallel

Inter-Slice Forces," Geotechnique, Institution of Civil Engineers, London, Vol. 17, No. 1, March,

pp. 11-26.

Taylor, Donald W. (1937) "Stability of Earth Slopes," Journal of the Boston Society of Civil

Engineers, Vol. 24, No. 3, July. (Reprinted in Contributions to Soil Mechanics: 1925-1940,

Boston Society of Civil Engineers, pp. 337-386.)