slimfold closet systems - united door...

www.dunbarton.com 1Closet Systems

Slimfold Closet Systems

2700

Specified by

Specified by

Major Hotel

Major Hotel

ChainsChains

Heavy-Duty Steel BifoldDoor with Mirror LaminateHeavy duty, long life bypassMirror laminated on 24 gauge steel

panel–Exclusive Design!Easily installed—only a screwdriver

required!Patented Slimfold® hat and

hardware system installedSmooth and quite operationBreaks over center allowingmaximum openingSpring loaded guide rods for self-alignment3.0 mm safety backed mirrorPanel Colors: Bright White, Ivory Track: Mill finish aluminumMirror Edging: Polished Chrome

mylar mirror edgingHandle: Polished Chrome handleSeries 2750 ST Available with

Polished Brass Mirror Edging/Handleand Polished Brass Aluminum Topand Bottom Track

Stiles and Rails:

4050, 4260, 4760, 2020, 2007, 4400, 4900Door Panel:

2700, 2200 (Bright White and Ivory only)

4550, 7023, 5002, 5003

2200, 2700 (Mylar Trim)

4100 Aluminum Overlay

The BEAUTY ofSlimfold®

Mirror DoorsSlimfold Mirror Doors aredesigned to enhance bothresidential and commercialapplications.

VarietySlimfold offers 14 outstandingand innovative mirror doordesigns, from sliders to bifoldsand the new one-panel overlaydoor. There's a design to fit everydecor!

InstallationInstallation is easy! With just afew tools and a little time,Slimfold Mirror Doors cantransform a room from plain tobeautiful! All hardware isincluded.

Safety All mirror panels are 1/8" (3mm)float plate glass mirror with alaminated backing to preventshattering (4mm on 7'0" heightsand taller).

DeliverySlimfold delivers! Our lead timeis 3 weeks for standard colors.Slimfold measures its ownperformance using a “PromisesKept” percentage standard toguarantee renowned service.

WarrantySlimfold offers a Limited LifetimeWarranty on every door!

Steel Framed BifoldMirror DoorBifold design for full closet access1/4" frame around mirrorsBearing hinges for smooth, non-

binding door operationMatching aluminum pulls3.0 mm safety backed mirrorTrack: Top and bottom track

prefinished to match doorStiles/Rails/Mirror Edging: Bright

White, Vanilla, Architectural Brown,Black, Arctic Silver, Satin Gold,Bright Gold

4400

4100 (Overlay)

Aluminum Overlay DoorOverlays opening and does not

require precise fit Fits non-standard openingsEasily Installed; simple, one-person

job!Sturdy frame gives years of trouble-

free operationMagnetic catch system adjusts to

variations in opening sizes3.0 mm safety backed mirror; 4mm

(5/32") on 3'0" widthsMounting Pivots: 12 gauge pivot

brackets eliminate trackStiles/Rails: Bright Gold

(Aluminum), Satin SilverAvailable in Two-Panel SpaceSaver

Unit (2'0, 2'6, 2'8, 3'0, and 4'0widths)

4900

Steel Frameless BifoldMirror DoorProvides a beautiful, uninterrupted

look of mirrorNon-visible frame on long sidesBearing hingesAnodized aluminum pulls3.0mm safety backed mirrorTrack: Top and bottom track

prefinished to match doorStiles/Rails: Bright White, Vanilla,

Architectural Brown, Black, ArcticSilver, Satin Gold, Bright Gold

Specified by

Specified by

Major Hotel

Major Hotel

ChainsChains

5002

Aluminum Frameless BifoldMirror DoorProvides a beautiful, uninterrupted

look of mirrorNon-visible frame on long sides Interchangeable dual-height tracks for

installation over carpet or hardflooringBearing hingesAnodized aluminum pulls3.0mm safety backed mirrorTrack: Top and bottom track

prefinished to match doorStiles/Rails: Satin Brass, Bright Brass,

Satin Chrome, Bright Chrome

5003

Aluminum Framed BifoldMirror DoorBifold design provides full access to

closet opening1/4" frame around mirrorsBearing hinges for smooth, non-

binding door operationMatching aluminum pulls3.0 mm safety backed mirrorTrack: Top and bottom track

prefinished to match doorStiles/Rails/Mirror Edging: Satin

Brass, Bright Brass, Satin Chrome,Bright Chrome

Note: Color matches are subject to printing limitations. Color chips available for all finishes; contact factory.

Black

Bright White

Vanilla

Ivory

ArchitecturalBrown

Black Arctic Silver

Satin Gold Bright Gold

Satin Brass Bright Brass

Satin Chrome Bright Chrome

Polished Brass Polished Chrome

Bright Gold Satin Silver

Slimfold® Mirror Bifold Doors

Specified by

Specified by

Major Hotel

Major Hotel

ChainsChains

New Products! Specs available at www.dunbarton.com or call 800-633-7553

Here are the newest Slimfold® inno-vations: The "markeable" MarkerDoor, "locking, no-pinch" Saf-T-Fold, and the two-panel, outswingSpaceSaver mirror door. Contact usfor specification sheets on thesenew products, or download atwww.dunbarton.com.

2 www.dunbarton.com

Heavy-Duty Steel SlidingDoor with Mirror Laminate Heavy duty, long life bypassMirror laminated on 24 gauge steel

panel–Exclusive Design!Adjustable nylon ball-bearing bottom

roller system with 1" verticaladjustmentEasily installed and adjusted3.0 mm safety backed mirrorPanel Colors: Bright White, IvoryTrack: Top and bottom track

prefinished to match doorMirror Edging: Polished Chrome

mylar mirror edgingHandle: Polished Chrome handleModel 2250 ST available with

Polished Gold mylar mirror edging,Polished Gold handle, and PolishedBrass steel top and bottom track

2200 4260

Steel Framed SlidingMirror Door with BottomRollerNew jump-resistant bottom roller!Adjustable top L-Guides for greater

vertical adjustmentEasy to adjust for out-of-square

openingsOne piece 13/4" deep top track and

integral fasciaLow rise bottom track for minimal

floor obstruction3.0 mm safety backed mirror4.0 mm safety backed mirror for

heights greater than 7'0"Track: Top and bottom track



Steel Framed SlidingMirror Door with TopRollerTop hung single wheel rollers for

smooth and quiet operationSnap-in bottom guides are virtually

jump proofEasy to adjust for out-of-square

openingsLow rise bottom track for minimal

floor obstruction3.0 mm safety backed mirrorTrack: Top and bottom track



4050

4760

Steel Frameless SlidingMirror Door with BottomRollerProvides a beautiful, uninterrupted

look of mirrorAdjustable top L-Guides for smooth

and quiet operationNew jump-resistant bottom roller!Easy to adjust for out-of-square

openingsOne piece 13/4" deep top trackLow rise bottom track3.0 mm safety backed mirror4.0 mm safety backed mirror for




2020 Wide Stile!

Steel Framed SlidingMirror Door with BottomRollerNew jump-resistant bottom roller!Adjustable top L-Guides for greater








4550

Specified by

Specified by

Major Hotel

Major Hotel

ChainsChains Specified by

Specified by

Major Hotel

Major Hotel

ChainsChains

7023 Wide Stile!

Aluminum Framed SlidingMirror Door with BottomRollerNew jump-resistant bottom roller!Adjustable top L-Guides for greater








Aluminum Framed SlidingMIrror Door with BottomRoller; Narrow StileNew jump-resistant bottom roller!Adjustable top L-Guides for greater








2007

Steel Frameless SlidingMirror Door with TopRollerTop hung single wheel rollers for

smooth and quiet operationSnap-in bottom guides are virtually

jump proofEasy to adjust for out-of-square

openingsLow rise bottom track for minimal

floor obstruction3.0 mm safety backed mirrorTrack: Top and bottom track



www.dunbarton.com 3

Slimfold® Mirror Sliding Doors

4400Steel Framed Bifold Mirror DoorProvide Model 4400 bifold mirror wardrobe doorsmanufactured by SlimfoldCorporation, Dothan, AL in thedimensions shown on thedrawings and with thefollowing attributes:

ARRANGEMENTa. Bifold mirror wardrobe

doors shall consist offramed mirror panels joinedat the top and bottom byconcealed hinges withstops that prevent overclosing of the door.

b. Spring-loaded guides with11/16" (17mm) travel shall beinstalled at the top andbottom corners of the lead(guided) door panel. Thespring-loaded top pivot inthe pivot panel shallengage a horizontallyadjustable pivot bracketretained in the top track.The guides shall engagewheels that are free to slide or rotate and are retained inthe top and bottom tracks. The wrench adjustable bottompivot shall be installed in the bottom corner of the pivotpanel and engage a horizontally adjustable pivot bracket inthe bottom track.

c. The pivots and guides shall be installed in corner connectorholes by tapping on their projecting steel pins. The pivotand guide housings shall be interchangeable so a pair ofdoors can install either to a right or left jamb.

d. The top and bottom tracks shall be of same height andinterchangeable by containing identical hardware. A springsnugger is installed in both the top and bottom tracks tohelp keep the doors in place while in the closed position.

e. The concealed hinges shall be zinc plated and beassembled with two plastic bearing washers to preventbinding and promote long wear life.

FRAMEa. Each door shall consist of 2 prefinished roll formed steel

framed mirror panels. Stiles and rails shall be joined ateach corner by a corner block. Each corner block shall havea cavity to accept a pivot or guide.

b. A matching aluminum mechanically fastened pull shall beprovided.

PANELS3mm float plate glass mirror, safety backed to conform withUniform Building Code Standard 24-2, Part II. Safety mirror400 lb. ft. Impact test ANSI Z-97.1 1984 boil and impacttest.

FINISHESBright White, Vanilla, Architectural Brown, Black, Arctic Silver,Satin Gold, Bright Gold

No. Finished OpeningPanels Size Door Width Width

2 2'0" 231/2" 24"2 2'6" 291/2" 30"2 3'0" 351/2" 36"4 4'0" 47" 48"4 5'0" 59" 60"4 6'0" 71" 72"

Required Finished Opening Heights:6'8" (801/2") and 8'0" (96")

(2045mm) (2438mm)Finished opening width tolerances +1/4"/–0.

2700Steel Bifold Mirror Door with Chrome Mylar EdgingProvide Model 2700 bifold mirror wardrobe doorsmanufactured by Slimfold Corporation, Dothan, AL in thedimensions shown on thedrawings and with the followingattributes:

ARRANGEMENTa. Bifold mirror doors shall

consist of mylar-framedmirror panels laminated toa steel panel. Panel will be24 gauge cold rolled steelor zinc-iron alloy (G60)galvanized. Series 2750available with Bright Goldmylar edging.

b. Top and bottom tracks millfinish aluminum on. 2725and 2775 Series use abottomless track bracket.

c. Weight bearing pivot rodsare adjustable screw-type,and securely held in placeby nylon rod clampsassemblies.

d. Guide rods and upper pivot rods are spring loaded for easyself-alignment, and securely held in position by self-retaining nylon sleeves combined as exclusive SlimfoldPatented hardware system.

e. Door panels shall be reinforced with 4" (10cm) widestiffeners welded to backs and flanges of panels, hinged inpairs with a minimum of 10" (25cm) of piano-type hinges.

PANELSa. 3mm float plate glass mirror, safety backed to conform with

Uniform Building Code Standard 24-2, Part II. Safetymirror 400 lb. ft. Impact test ANSI Z-97.1 1984 boil andimpact test.

b. Mirror shall be securely mounted with dual faced cushionadhesive tape. A steel channel shall protect the bottomedge of the mirror.

Series 2700 / 2750 / 2725 / 2775 STNo. Finished Opening

Panels Size Door Width Width

2 1'6" 171/2" 18"2 1'9" 201/2" 21"2 2'0" 231/2" 24"2 2'3"/2'4" 261/2" / 271/2" 27"/28"2 2'6" 291/2" 30"2 2'8"/2'9" 311/2" / 321/2" 32"/33"2 3'0" 351/2" 36"

Series 2700 / 2750 ST4 3'0" 35" 36"4 3'6" 41" 42"4 4'0" 47" 48"4 5'0" 59" 60"4 6'0" 71" 72"

Required Finished Opening Heights:6'8" (80 1/2") and 8'0" (96")(2045mm) (2438mm)

Finished Opening Width Tolerance +1/4" / -0"

4900Steel Frameless Bifold Mirror DoorProvide Model 4900 bifold mirror wardrobe doorsmanufactured by Slimfold Corporation, Dothan, AL in thedimensions shown on the drawings and with the followingattributes:

ARRANGEMENTa. Bifold mirror wardrobe

doors shall consist ofmirror panels joined at thetop and bottom byconcealed hinges withstops that prevent overclosing of door.

b. Spring-loaded guides with11/16" (17mm) travel shallbe installed at the topeand bottom corners of thelead (guided) door panel.The spring-loaded top pivotin the pivot panel shallengage a horizontallyadjustable pivot bracketretained in the top track.The guides shall engagewheels that are free toslide or rotate and areretained in the top andbottom tracks. The wrenchadjustable bottom pivot shall be installed in the bottomcorner of the pivot panel and engage a horizontallyadjustable pivot bracket in the bottom track.

c. The pivots and guides shall be installed in corner connectorholes by tapping on their projecting steel pins. The pivotand guide housings shall be interchangeable so a pair ofdoors can install either to a right or left jamb.

d. The top and bottom tracks shall be of same height andinterchangeable by containing identical hardware. A springsnugger is installed in both the top and bottom tracks tohelp keep the doors in place while in the closed position.

e. The concealed hinges shall be zinc plated and beassembled with two plastic bearing washers to preventbinding and promote long wear life.

FRAMEa. Each door shall consist of 2 prefinished roll formed steel

framed mirror panels. Stiles and rails shall be joined ateach corner by a corner block. Each corner block shall havea cavity to accept a pivot or guide.

b. The stiles shall be bonded to the back of the mirror andshall not cover the long sides of the mirror.

c. A bright anodized aluminum mechanically fastened pullshall be provided.



b. Polished edges on two long sides.FINISHESBright White, Vanilla, Architectural Brown, Black, Arctic Silver,Satin Gold, Bright Gold


2 2'0" 231/2" 24"2 2'6" 291/2" 30"2 3'0" 351/2" 36"4 4'0" 47" 48"4 5'0" 59" 60"4 6'0" 71" 72"


Finished opening width tolerances +1/4"/–0

5003Framed Aluminum Bifold Mirror DoorProvide Model 2800 AL bifold mirror wardrobe doorsmanufactured by Slimfold Corporation, Dothan, AL in thedimensions shown on the drawings and with the followingattributes:

ARRANGEMENTa. Bifold mirror doors shall

consist of aluminumframed mirror side panels.Door panels shall bereinforced with 4" (10cm)wide stiffeners screwed tobacks and flanges ofpanels, hinged in pairs witha minimum of 10" (25cm)of piano-type hinges.

b. Top and bottom tracks millfinish aluminum.

c. Weight bearing pivot rodsare adjustable screw-type,and securely held in placeby nylon rod clampassemblies.

d. Guide rods and upper pivotrods are spring loaded foreasy self-alignment, andsecurely held in position byself-retaining nylon sleevescombined as exclusiveSlimfold Patented hardwaresystem.



FINISHESSatin Brass, Bright Brass, Satin Chrome, Bright Chrome


2 1'6" 171/2" 18"2 1'9" 201/2" 21"2 2'0" 231/2" 24"2 2'3"/2'4" 261/2" / 271/2" 27"/28"2 2'6" 291/2" 30"2 2'8"/2'9" 311/2" / 321/2" 32"/33"2 3'0" 351/2" 36"4 3'0" 35" 36"4 3'6" 41" 42"4 4'0" 47" 48"4 5'0" 59" 60"4 6'0" 71" 72"

Required Finished Opening Heights:6'8" (80 1/2") and 8'0" (96")(2045mm) 2438mm)


5002Frameless Aluminum Bifold Mirror DoorProvide Model 2900 AL bifoldmirror wardrobe doorsmanufactured by SlimfoldCorporation, Dothan, AL in thedimensions shown on the drawingsand with the following attributes:

ARRANGEMENTa. Bifold mirror wardrobe doors

shall consist of aluminumframeless mirror side panels.Door panels shall be reinforcedwith 4" (10cm) wide stiffenersscrewed to flanges of panels,hinged in pairs with a minimumof 10" (25cm) of piano-typehinges.

b. Top and bottom tracks millfinish aluminum.

c. Weight bearing pivot rods areadjustable screw-type, andsecurely held in place by nylonrod clamp assemblies.

d. Guide rods and upper pivot rods

Mirror Specifications

4 www.dunbarton.com

are spring loaded for easy self-alignment, and securely heldin position by self-retaining nylon sleeves combined asexclusive Slimfold Patented hardware system.





2 2'0" 231/2" 24"2 2'3"/2'4" 261/2" / 271/2" 27"/28"2 2'6" 291/2" 30"2 2'8"/2'9" 311/2" / 321/2" 32"/33"2 3'0" 351/2" 36"4 3'0" 35" 36"4 4'0" 47" 48"4 5'0" 59" 60"4 6'0" 71" 72"

Required Finished Opening Heights:6'8" (80 1/2") and 8'0" (96") (2045mm) 2438mm)


4100Framed Overlay DoorProvide Model 4100 overlay mirror wardrobe doorsmanufactured by Slimfold Corporation, Dothan, AL in thedimensions shown on the drawings and with the followingattributes:

ARRANGEMENTa. Overlay mirror door shall

consist of a single mirrorpanel framed withanodized aluminum stilesand rails secured togetherwith screws.

b. Overlay mirror door shallbe supported by 12 gaugepivot brackets at both thetop and bottom and shallbe prefinished to matchthe framing.

c. A quieting nylon pivotbushing shall be used tointerface between theframe and the pivotbrackets.

d. Magnetic catch shall becapable of being mountedon the inside perimeter ofthe opening and utilize aone-piece plate that doesnot require adjustments forvariations in opening sizes.

e. Stile profile shall be such that it consists of an integralpull.

PANELSa. 3mm float plate glass mirror (4mm on 3'0" widths), safety

backed to conform with Uniform Building Code Standard24-2, Part II. Safety mirror 400 lb. ft. Impact test ANSI Z-97.1 1984 boil and impact test.

b. Mirror is to be received and mechanically locked into framecomponents and utilizes a flexible glazing channel.

FINISHESBright Gold (Aluminum), Satin Silver

DistanceNo. Between Cut

Panels Opening Door Width Moldings

1 2'0" 281/2" 283/8"1 2'6" 341/2" 343/8"1 3'0" 401/2" 403/8"

Required Finished Opening Heights:6'8" (80 1/2")

(Door height is 81") (2045mm)Finished opening width tolerances +1" / –3"Finished opening height tolerance +1 1/2"

2200Steel Sliding Mirror Door with Chrome Mylar EdgingProvide Model 2200 sliding mirror wardrobe doorsmanufactured by Slimfold Corporation, Dothan, AL in thedimensions shown on the drawings and with the followingattributes:

ARRANGEMENTa. Sliding Mirror Wardrobe Doors are Slimfold Series 2200 or

2250 of mirror laminated to a steel panel supported byadjustable bottom rollers and top guides that travel inrespective tracks.

B. The top track is prefinished with two integral fascia looks

(reversible) that match thestile and rail finish.

C. The bottom track isprefinished to match the stileand rail finish and shall notexceed 5/16" (8mm) in heightfor minimum obstruction.

d. The door panels andreinforced stiffeners shall be24 gauge cold rolled steel. Ahot dipped coating of zinc-ironalloy (G60) is available asgalvanized steel option.

e. The nylon bottom rollers areball-bearing, free-floating andprovide 1" (25mm) verticaladjustment. The polypropylenetop guide are permanentlyfixed to the top connectorsand fit snugly into the verticalopenings in the top track.

PANELSa. 3mm float plate glass mirror,

safety backed to conform withUniform Building CodeStandard 24-2, Part II. Safetymirror 400 lb. ft. Impact testANSI Z-97.1 1984 boil and impact test. 4mm float plateglass mirror for heights greater than 7'0".

b. Mirror shall be securely mounted with dual faced cushionadhesive tape. A steel channel shall protect the bottomedge of the mirror.

FINISHESSeries 2200 ST: Top and bottom tracks are G60 galvanizedsteel prefinished to match door panel. Mirror edging shall bePolished Chrome mylar. Handle shall be Polished Chrome.Series 2250 ST: Top and bottom tracks are Polished Brasssteel. Mirror edging shall be Polished Gold mylar. Handle shallbe Polished Gold. Steel panel colors are Bright White and Ivory


2 4'0" 245/8" 48"2 5'0" 305/8" 60"2 6'0" 365/8" 72"3 9'0" 365/8" 108"


Finishing Open Width Tolerance +1/2" / -2"

4260Steel Framed Sliding Mirror DoorProvide Model 4260 sliding mirror wardrobe doorsmanufactured by Slimfold Corporation, Dothan, AL in thedimensions shown on the drawings and with the followingattributes:

ARRANGEMENTa. Sliding mirror doors

shall consist of framedmirror panels supportedby adjustable bottomrollers and adjustabletop guides that travel ina threshold track andtop track respectively.

b. Top track to beprefinished steel withan integral fascia thatmatches the stile andrail finish.

c. The bottom track shallbe prefinished steel tomatch door frame andshall not exceed 5/16"(8mm) in height forminimum floorobstruction.

d. The bottom roller shallbe free floating andprovide a 1" (25mm)vertical adjustment.Model 4260 rollersshall have plain bearingacetal wheels.

e. The adjustable top guides shall be permanently fixed to thetop connectors and fit snugly into the vertical openings inthe top track.

FRAMEa. The frame shall consist of prefinished roll-formed stiles and

rails joined at each corner by positively retained,removable, unhanded, connectors that snap in place andcontain preassembled rollers and guides.


Uniform Building Code Standard 24-2, Part II. Safetymirror 400 lb. ft. Impact test ANSI Z-97.1 1984 boil andimpact test. 4mm float plate glass mirror for heightsgreater than 7'0".



2 4'0" 245/8" 48"2 5'0" 305/8" 60"2 6'0" 365/8" 72"2 8'0" 485/8" 96"3 9'0" 365/8" 108"3 12'0" 485/8" 144"



2020Steel Framed Sliding Mirror Door with BottomRollerProvide Model 2020 sliding mirror wardrobe doorsmanufactured by Slimfold Corporation, Dothan, AL in thedimensions shown on the drawings and with the followingattributes:

ARRANGEMENTa. Sliding mirror wardrobe

doors shall consist offramed mirror panelssupported by adjustablebottom rollers thattravel in a steel bottomtrack and spring loadedtop guides that travel ina steel one piece track.

b. The top track shall beone piece and of pre-finished steel. Thefascia finish shall matchthat of the top track.

c. The bottom track shallbe pre-finished steeland not exceed 5/16"(8mm) from the floor.Top and bottom trackfinishes shall match thestile and rail.

d. The bottom roller shallbe free floating andprovide a 1" (25mm)vertical adjustment.Model 4260 rollersshall have plain bearing acetal wheels.


FRAMEa. The stiles and rails shall be joined at each corner by

unhanded connectors that snap into position, are positivelyfastened, but can be removed for changing of inserts.Bottom connectors shall have either ball bearing rollers orsolid acetal plain bearing wheels, both with an integralanti-jump housing. Top connectors shall have a solidplastic guide permanently attached to the connectorhousing which provides a snug fit with the top track. Theplastic guide will adjust to five different positions to ensurean optimum fit. Vertical adjustment is 1 1/8" (29mm) onthe bottom and 1 1/4" (32mm) on the top.

PANELS3mm float plate glass mirror, safety backed to conform withUniform Building Code Standard 24-2, Part II. Safety mirror400 lb. ft. Impact test ANSI Z-97.1 1984 boil and impacttest. 4mm float plate glass mirror for heights greater than 7'0".



2 4'0" 245/8" 48"2 5'0" 305/8" 60"2 6'0" 365/8" 72"2 8'0" 485/8" 96"3 9'0" 365/8" 108"3 12'0" 485/8" 144"



4050Steel Framed Sliding Mirror Door with Top RollerProvide Model 4050 sliding mirror wardrobe doorsmanufactured by Slimfold Corporation, Dothan, AL in thedimensions shown on the drawings and with the followingattributes:

ARRANGEMENTa. Sliding mirror doors shall consist of framed mirror panels

supported by single wheel top hangers and bottom guidesthat travel in top and bottom tracks respectively.


www.dunbarton.com 5

b. The top track shall be steelwith a prefinished steelfascia as an integral part ofthe track.

c. The bottom track shall beprefinished steel and shallnot exceed 5/16" (8mm) inheight for minimum floorobstruction.

d. The top hangers shall haveacetal wheels and provide11/2" (38mm) verticaladjustment.

e. The floating nylon guidesshall lock into floor track &automatically compensatefor floors up to 3/4" (19mm)out of level.

FRAMEa. The frame shall consist of

prefinished roll formedsteel stiles and rails joinedat each corner by positively retained, removable, unhandedconnector assemblies that snap in place and contain tophangers and bottom guides.

b. The 7/8" wide stiles shall function as integral full lengthpulls.



FINISHESBright White, Vanilla, Architectural Brown, Black, Arctic Silver,Satin Gold Bright Gold


2 4'0" 245/8" 48"2 5'0" 305/8" 60"2 6'0" 365/8" 72"

Required Finished Opening Heights:6'8" (801/2")(2045mm)

Finished Opening Width Tolerance +1"/-3"

4760Steel Frameless Sliding Mirror DoorProvide Model 4760 sliding mirror wardrobe doorsmanufactured by Slimfold Corporation, Dothan, AL in thedimensions shown on thedrawings and with thefollowing attributes:

ARRANGEMENTa. Frameless sliding mirror

doors shall consist ofmirror panels supported byadjustable bottom rollersand adjustable top guidesthat travel in a thresholdtrack and top trackrespectively.

b. The top track shall beprefinished steel with anintegral fascia thatmatches the stile and railfinish.

c. The bottom track shall beprefinished steel to matchdoor frame and shall notexceed 5/16" (8mm) inheight for minimum floorobstruction.

d. The bottom rollers shall be free floating and provide a 1"(25mm) vertical adjustment. Model 4760 rollers shall haveplain bearing acetal wheels.


FRAMEa. The frame shall consist of prefinished roll formed steel

stiles and rails joined at each corner by positively retained,removable, unhanded connector assemblies that snap inplace and contain preassembled rollers and guides.

b. The stiles shall be bonded to the back of the polished orbeveled edge of the mirror and shall not cover the longsides of the mirror.

c. Aluminum pull to be mounted with screws to edge of door.PANELSa. 3mm float plate glass mirror, safety backed to conform with


b. Mirror shall have polished edges on two long sides.FINISHESBright White, Vanilla, Architectural Brown, Black, Arctic Silver,Satin Gold, Bright Gold


2 4'0" 245/8" 48"2 5'0" 305/8" 60"2 6'0" 365/8" 72"2 8'0" 485/8" 96"3 9'0" 365/8" 108"3 12'0" 485/8" 144"

Required Finished Opening Heights:6'8" (801/2") and 8'0" (96")(2045mm) (2438mm)

Finished Opening Width Tolerance +1/2"/-2"

2007 New!Steel Frameless Sliding Mirror Door with TopRollerProvide Model 2007 sliding mirror wardrobe doorsmanufactured by Slimfold Corporation, Dothan, AL in thedimensions shown on the drawings and with the followingattributes:

ARRANGEMENTa. Sliding mirror doors shall

consist of framed mirrorpanels supported by singlewheel top hangers andbottom guides that travel intop and bottom tracksrespectively.

b. The top track shall be steelwith a prefinished steelfascia as an integral part ofthe track.

c. The bottom track shall beprefinished steel and shallnot exceed 5/16" (8mm) inheight for minimum floorobstruction.

d. The top hangers shall haveacetal wheels and provide11/2" (38mm) verticaladjustment.

e. The floating nylon guides shall lock into floor track &automatically compensate for floors up to 3/4" (19mm) outof level.

FRAMEa. The frame shall consist of prefinished roll formed steel

stiles and rails joined at each corner by positively retained,removable, unhanded connector assemblies that snap inplace and contain top hangers and bottom guides.

b. The 7/8" wide stiles shall function as integral full lengthpulls.



FINISHESBright White, Vanilla, Architectural Brown, Black, Arctic Silver,Satin Gold Bright Gold


2 4'0" 245/8" 48"2 5'0" 305/8" 60"2 6'0" 365/8" 72"

Required Finished Opening Heights:6'8" (801/2")(2045mm)

Finished Opening Width Tolerance +1"/-3"

4550 New!Aluminum Framed Sliding Mirror Door with BottomRollerProvide Model 4550 sliding mirror wardrobe doorsmanufactured by Slimfold Corporation, Dothan, AL in thedimensions shown on thedrawings and with the followingattributes:

ARRANGEMENTa. Sliding mirror wardrobe doors

shall consist of aluminumframed mirror panelssupported by adjustablebottom rollers that travel inan aluminum bottom trackand top guides that travel inan aluminum top track.

b. The top track shall be onepiece and of pre-finishedaluminum. The fascia finishshall match that of the toptrack.

c. The bottom track shall bepre-finished aluminum andnot exceed 5/16" (8mm)

from the floor. Both the top track and bottom track finishesshall match the stile and rail.

d. The stile, rail, top track and bottom track shall have afinish. The connectors shall be plated.


unhanded connectors that snap into position, are positivelyfastened, but can be removed for changing of inserts.Bottom connectors shall have either ball bearing rollers orsolid acetal plain bearing wheels, both with an integralanti-jump housing. Top connectors shall have a solidplastic guide permanently attached to the connectorhousing which provides a snug fit with the top track. Theplastic guide will adjust to two different positions to ensurean optimum fit. Vertical adjustment is 1 1/8" (29mm) onthe bottom and 1 1/4" (32mm) on the top.




2 4'0" 245/8" 48"2 5'0" 305/8" 60"2 6'0" 365/8" 72"2 8'0" 485/8" 96"3 9'0" 365/8" 108"3 12'0" 485/8" 144"



7023 New!Aluminum Framed Sliding Mirror Door with BottomRoller (Wide Stile)Provide Model 7023 sliding mirror wardrobe doorsmanufactured by Slimfold Corporation, Dothan, AL in thedimensions shown on the drawings and with the followingattributes:

ARRANGEMENTa. Sliding mirror wardrobe

doors shall consist ofaluminum framed mirrorpanels supported byadjustable bottom rollersthat travel in an aluminumbottom track and top guidesthat travel in an aluminumtop track.

b. The top track shall be onepiece and of pre-finishedaluminum.

c. The bottom track shall bepre-finished aluminum andnot exceed 5/8" (8mm)from the floor. Both the toptrack and bottom trackfinishes shall match thestile and rail.

d. The stile, rail, top track andbottom track shall have a finish. The connectors shall beplated.


unhanded connectors that snap into position, are positivelyfastened, but can be removed for changing of inserts.Bottom connectors shall have either ball bearing rollers orsolid acetal plain bearing wheels, both with an integralanti-jump housing. Top connectors shall have a solidplastic guide permanently attached to the connectorhousing which provides a snug fit with the top track. Theplastic guide will adjust to five different positions to ensurean optimum fit. Vertical adjustment is 1 1/8" (29mm) onthe bottom and 1 1/4" (32mm) on the top.




2 4'0" 245/8" 48"2 5'0" 305/8" 60"2 6'0" 365/8" 72"2 8'0" 485/8" 96"3 9'0" 365/8" 108"3 12'0" 485/8" 144"




6 www.dunbarton.com

The versatility of The Flush Doorprovides a wide range of finishingoptions. Painted, stenciled,wallpapered, or used with theprefinished color, The Flush Doorallows you to express your own style.

Beautifully embossed, smooth panelsare an ideal choice for a room with asix-panel entry door.

The ORIGINAL Pre-FinishedSteel Bifold DoorSlimfold developed the steel bifolddoor over 45 years ago, and hasbecome the leader in the industry.Slimfold doors are prefinished andare offered in six innovative yettimeless designs that blendbeautifully with any decor.Engineered DurabilitySlimfold doors have beenengineered for beauty, smooth,quiet operation and quality. Theyare carefully manufactured toprovide years of maintenance-freeuse. The electrostatically-appliedenamel is standard, andgalvanized steel is available forareas of high humidity.InstallationInstallation is easy! With just afew tools a little time, SlimfoldSteel Bifold Doors can transform aroom from plain to beautiful! Allhardware is included.DeliverySlimfold delivers! Our standardlead time is 3 weeks for standardcolors. One of the best in theindustry!WarrantySlimfold offers a Limited LifetimeWarranty on every door!OptionsExclusive anti-pinch Saf-T-Foldfeature with lock. Contact factoryfor specification sheet ordownload at www.dunbarton.com.

Classic

The wide louvers and delicate trimmoldings have made The Classic afavorite bifold door for many years.

Lancaster

Deep profile louvers make this door adesign winner. Perfect for Colonial,traditional or contemporary decor.

The combination of wide louver andembossed panels makes this door afavorite for all decors.

Deeply embossed panels give this doora rich, sculptured look thatcomplements any decor.

Regency Flush

WestchesterLouver II

Pre-finished Steel Bifold Doors

The Saf-T-Fold is offered in the newCollegiate door style (shown) in anarray of colors. Saf-T-Fold anti-pinchand locking features are available as an option in all Slimfold® steel bifolds.

Saf-T-Fold – New!

4', 5', and 6' Widths

4', 5', and 6' Widths

www.dunbarton.com 7

Textures

Slimfold® Color Spectrum

Leather “No Fingerprint” FinishStandard on all steel bifold doors;smooth finish available.

•Bright White •Ivory

ToastChili Red

Herbal*

Black

Gray Steel* Edgy Gold*

Copper* Blue Sail*

Sapphire

• Standard Slimfold Steel Bifold Colors Standard Saf-T-Fold Colors

* Indicates Premium Color; upcharge and lead timeapplies.

Custom Colors Available. Printed colors are as close asprinting limitations will allow; contact factory for paintedcolor panels.

Steel Bifold SpecificationsShort Form: Wardrobe and closet doors, so

specified to be Slimfold® prefinished metal foldingdoors manufactured by Slimfold® Products Division,meet or exceed Voluntary Product Standard PS38-70,as published by the U.S. Department of Commerce,National Bureau ofStandards.

Full Form: Doorpanels andreinforcingstiffeners shall be24-gauge coldrolled steel.

Alternate forcoastal areas withhigh salt contentatmosphere: A hotdipped coating ofzinc-iron alloy(galvanized) isrecommended. Alsorecommended forbathrooms, laundryrooms, HVAC areasor any high-humidity situation.Contact factory forproper re-paintinginstructions.

Door panelsshall be accurately formed and reinforced with 4"wide stiffeners welded to backs and flanges of panels.Panels shall be hinged in pairs with a minimum of10" (25.40cm) of piano-type hinges. Panels to besound-deadened with corrugated fiberboard orabsorbent, as option.

All mounting hardware shall be factory installed.Rods to be zinc plated cold rolled steel with yellowdichromate finish. Patented weight bearing pivot rodsto be 9/16" (0.79cm) diameter, adjustable screw

type, and securely held in position by nylon rod clampassemblies. Guide rods and upper pivot rods shall be1/4" (0.64cm) in diameter, spring loaded for easyself-alignment, and securely held in position by self-retaining nylon sleeves. Top and bottom tracks are .05mill finish aluminum. Pivot sockets and rubber trackbumpers shall be adjustable to allow lateral alignmentand be preset in the track. Sockets are steel zincplated and waxed. Doors to be supplied prefinished.Mill finish bottomless track bracket available as anoption. Consists of one bracket, socket and mountingscrews per two-panel unit. Alignment bracketsincluded on four-panel units. Hardware packagesconsisting of knobs or pulls, screws, and felt discs tobe supplied with each door.

Mirrors shall be high quality, double strength withmylar trimmed edges and shall fully cover the panel.They shall conform to Government Specification DD-M-00411 (b) and be securely mounted with doublefaced polyurethane tape, which shall also act as ashock absorbing cushion for the glass. Channels shallprotect the top and bottom edges of the mirror.

All specifications are based on latest productinformation available at time of publication approval.We reserve the right to make changes at any time andwithout notice, in material specifications and styles.

Limited Lifetime WarrantySlimfold® Products Division warrants to the

purchaser that its products, when utilized for interiordoor use, will be free from defects in materials andworkmanship for the life of the product.

Slimfold® Products manufactured with galvanizedsteel are additionally warranted against rusting for aperiod of one (1) year from the date of purchase,provided the finish has not been cut or abradedthrough the metal. Galvanized steel should be usedwhere air has a high salt content or in locations withhigh humidity; see specifications.

This warranty is applicable only when the productscovered by it have been installed in accordance with

the recommended written installation instructions ofSlimfold® Products Division and with establishedbuilding practices, have been accorded treatmentwhich is considered good practice in the buildingindustry regarding storage and maintenance, and havebeen subjected only to normal use. BecauseSlimfold® Products Division cannot control themanner in which its products are handled afterleaving its premises, this warranty does not apply tothe finish or other damage occurring during shipment.

There are no warranties, express or implied, whichextend beyond the description on the face hereof,including the implied warranty of merchantability andthe implied warranty of fitness for a particularpurpose.

Some states do not allow limitations on how longan implied warranty lasts, so the above limitation maynot apply in some cases.

In the event the original consumer purchaser ofany Slimfold® product believes that the door or anyparts thereof covered by this warranty is defective, aletter outlining the alleged defect should be sentpostage prepaid to the following address:

Slimfold® Products DivisionPO Box 8577Dothan, AL 36304-0577Any Slimfold® Products part covered by this

warranty which, upon inspection by an authorizedrepresentative of Slimfold® Products Division, arefound by said representative to be defective, will berepaired or replaced at the option of Slimfold®Products Division. The purchase price of the part willbe refunded and does not include labor, installationcosts, finishing costs, or indirect or consequentialdamages of any nature. Some states do not allow theexclusion or limitation of incidental or consequentialdamages, so the above limitation or exclusion may notapply to you.

This warranty bestows certain legal rights, and youmay also have other rights which vary from state tostate.

8 Slimfold® is a registered trademark of the Dunbarton Corporation Form SF101 Rev. 9/10 © Copyright 2010

Standard Steel Bifold Door SizesTwo-Panel Units Four-Panel Units

Finished Max. Finished Heights Finished Max. Finished HeightOpening Door Opening 6'8" 7'6" 8' Opening Door Opening 6'8" 7'6" 8'Width Width Width Units Units Units Width Width Width Units Units Units1'6" 171/2" 18" 3'0" 35" 36"

457mm 445mm 470mm 914mm 889mm 914mm1'9" 201/2" 21" 3'6" 41" 42"

533mm 521mm 546mm 1067mm 1041mm 1067mm2'0" 231/2" 24" 4'0" 47" 48"

610mm 597mm 622mm 1219mm 1194mm 1219mm2'3" 261/2" 27" 801/2" 90" 96" 4'6" 53" 54" 801/2" 90" 96"

686mm 673mm 699mm 2045mm 2286mm 2438mm 1372mm 1346mm 1372mm 2045mm 2286mm 2438mm2'4" 271/2" 28" 4'8" 55" 56"

711mm 698mm 736mm 1422mm 1397mm 1447mm2'6" 291/2" 30" 5'0" 59" 60"

762mm 749mm 775mm 1524mm 1499mm 1524mm2'8" 311/2" 32" 5'4" 63" 64"

813mm 800mm 838mm 1676mm 1600mm 1676mm2'9" 321/2" 33" 5'6" 65" 66"

838mm 826mm 851mm 1676mm 1651mm 1676mm3'0" 351/2" 36" 6'0" 71" 72"

914mm 902mm 927mm 1829mm 1803mm 1829mm

Finished Opening Width Tolerance +1/4" / -0" Non-standard sizes available. Check with factory for sizes and availability.

Saf-T-Fold available in 6'8" height, 2'0, 2'6, 3'9, 4'0, 5'0, and 6'0 widths

Steel Bifold Specifications

P.O. Box 8577 Dothan, AL 36304-0577800-633-7553 334-794-0661 334-793-3462 fax

www.dunbarton.com [email protected]

Closet Systems

10% total recovered fiber / all post-consumer fiber

slimfold closet systems - united door...

Documents