slides, hinges, pneumatic lifts

2012

www.panelplus.co

SLIDES, HINGES & PNEUMATIC LIFTS

Slides, Hinges &

Pneumatic Lifts

Drawer Sidespg. 293

Hinges• Acrylic Hinge - pgs. 306-307• Euro Hinges • Concealed Metal - pg. 302 • Double Action Spring Hinge - pg. 303 • Face Frame - pg. 295 • Flap Door Hinge - pg. 303 • Glass Door Hinge - pg. 303 • Institutional Hinge - pg. 303 • Plates For Euro Hinge - pg. 300 • Screw On & Dowel - pgs. 296-297 • Soft Close Euro Hinge & Attachment - pg. 302 • Specialty Euro Hinge - pg. 301 • Tool-Less - pgs. 298-299• Lateral Opened Door Hinge pg. 313• Panel Hinge (Plastic) - pg. 307• Piano Hinge • Metal - pg. 305 • Plastic - pgs. 306-307• Soft Closing Damping - pg. 315• Tools - pg. 304Hydraulic

Door Closerpg. 314

Sliding Door Track

& Hardware• Aluminum Sliding Passing Track - pgs. 317• Closet Door - pgs. 322-323• Furniture Inlay & Bypass Track - pgs. 318-319• Plastic Bypassing Track - pg. 316• Top Sliding Track (Wood) - pgs. 320-321

Slides• Euro Slides - pg. 289• Full Extension - Undermount • Soft close (Grass) - pg. 280 • Soft Close, Concealed - pg. 281 • Full Extension - Side Mount • 1” Over Travel (Dynaslide) - pg. 283 • 1” Over Travel Economy (e-line) - pg. 284 • 1” Over Travel Heavy Duty (e-line) - pg. 288 • Push Rebound, (REPON) - pg. 285 • Stainless Steel (Sugatsune) - pg. 287 • Low Profile (Fulterer) - pg. 282• Fulterer Pantry Pull Out- pgs. - 290-291• Keyboard Pull Out - See Section D• Waste Container - pgs. 292

Pneumatic Lifts• Lid Stays - pgs. 308-312

Soft Close Dampening System

pg. 282

Works with any drawer slide, allowing drawer to softly dampen & pull shut without slamming

pgs. 279-323

F

F-279

F-280

CONCEALED UNDERMOUNT ROLLER SLIDESFOR FACE FRAME APPLICATIONS

MOUNTING SCREWS SOLD SEPARATELY

See page 267 for our complete screw line

FULL EXTENSION SOFT CLOSE DRAWER SLIDESFACE FRAME OR FRAMELESS APPLICATION

JUST A SLIGHT PULL IS ALL YOU NEED

PRODUCT FEATURES:• Regular extension, concealed slide with smooth glide Delrin rollers.• Double captive, self-aligning slide system.• 1-1/4” self-closing feature.• 100 lb. static load capacity, 75 lb. dynamic load capacity.• Made in the USA & meets ANSI/BHMA A-156.9-2001 industry standard.• For use with up to 5/8” drawer material.• Rear sockets feature side-to-side plus height and depth adjustment.• Each set includes slides and rear mount sockets.• Almond color.

PRODUCT FEATURES:• Easily pulls open & closes with the grass soft-close dampening system.• Full extension with synchronized mechanism.• Integrated 2-dimesional adjustment for alignment- height + 3.5 mm & side + 1.5 mm• Each pair of slides is handed- 1 left & 1 right.• For use with up to 5/8” drawer material.• 100 lb. load capacity.• Each set includes slides, left & right front fixing brackets, and two rear mount brackets (rear mount brackets required for face frame applications only).

Calculation Outside Drawer WidthDrawer side thickness 16 (5/8”) 15 (9/16”) 14 (9/16”) 13 (1/2”)

Deduct from inside cabinet width 10 (3/8”) 12 (1/2”) 14 (9/16”) 16 (5/8”)

Frameless

Face Frame

Bonus Feature:Height & SideAdjustment

DRAWERLENGTH

CABINETDEPTH

INTERIOR CABINET DEPTHPART # MINIMUM MAXIMUM

OI-5323-09 9” 12” 10-15/16” 11-1/2”OI-5323-12 12” 15” 13-27/32” 14-7/16”OI-5323-15 15” 18” 16-29/32” 17-1/2”OI-5323-18 18” 20” 20” 20-9/16”OI-5323-21 21” 24” 22-15/16” 23-1/2”

16 pieces required per pairSCR-6625FHZ

DRAWER LENGTH

CABINETDEPTH

INTERIOR CABINET DEPTHPART # MINIMUM MAXIMUM

OI-DP2D-9 9” 12” 11-15/32” 11-3/4”OI-DP2D-12 12” 15” 12-7/8” 14-9/16”OI-DP2D-15 15” 18” 15-7/8” 17-9/16”OI-DP2D-18 18” 20” 18-27/32” 20-9/16”OI-DP2D-21 21” 24” 21-27/32” 23-17/32”

GRASS EXPRESS

GRASS DYNAPRO 2-D

F-281

SLIDE INSIDE CABINET DEPTH MOUNTING MEASUREMENTSSIZE

mm • inchesTRAVEL

mm • inchesMINIMUMmm • inches

MAXIMUMmm • inches

Amm • inches

Bmm • inches

Cmm • inches

Dmm • inches

305 • 12” 292 • 11.50” 325 • 12.80” 366 • 14.41” – – – 32 • 1.26” 381 • 15” 368 • 14.49” 401 • 15.79” 442 • 17.40” 320 • 12.60” – – 32 • 1.26” 457 • 18” 444 • 17.48” 477 • 18.78” 518 • 20.39” 320 • 12.60” 416 • 16.39” – 32 • 1.26” 553 • 21” 520 • 20.47” 553 • 21.77” 594 • 23.39” 320 • 12.60” 416 • 16.39” 480 • 18.90” 32 • 1.26”PACKING UNIT: 10 PAIR PER BOX (INCLUDING REAR MOUNTING BRACKETS AND DRAWER LOCKING DEVICE)

OI-4100 SERIES

• Galvanized Steel.• Has great smooth running qualities.• Can be used with Frameless or Face Frame cabinets.• Easy close device prevents slamming.• Each set includes slides, front mounting clips and rear mounting brackets.

Product Features

FOR USE WITH UP TO 5/8” DRAWER MATERIAL


See page 267 for our complete screw linePART # LENGTH

LOAD RATING

CARTON SIZE

OI-4100-12 12” 85 lbs. 10 PairsOI-4100-15 15” 80 lbs. 10 PairsOI-4100-18 18” 80 lbs. 10 PairsOI-4100-21 21” 75 lbs. 10 Pairs

16 pieces required per pairSCR-6625FHZ

75 LB. FULL EXTENSION SOFT CLOSECONCEALED UNDERMOUNT SLIDE

F-282

OI-5043 SERIES•Availablelengths:10”-28”.•ClearZincFinish.•Sidemountedwithtriggerrelease.•Lowprofileforshallowdrawersandtraditionaldesks.

•Lowprofile,only43mm(1.69”height).

•100lbs.LoadRating•Fullextensiontravel.•1/2”Sidespacing.•Triggerreleasedesign.•FaceFramehole.•32mmScrewMountingsystem.

•Coldrolledsteelwithsteelballbearings.

Product Features

mOuntIng SpEcIFIcatIOnS

mOuntIng ScREWS SOLD SEpaRatELY


Note: Measurements in Metric

SEE PAGE 294FOR REAR MOUNTING

BRACKETS AND SPACERS

•Madeofgreyhighimpactpolystyrene.•3modelsavailabletoaccommodatesideclearance .39”(10mm)-.53”(13.5mm).•Drawerissoftlydampened&pulledshutwithoutslamming.•Allmountinghardware&installationinstructionsincluded.

Product Features4.5 7

496145

192

129 3132

27 522

OI-8002

OI-8001, OI-8003

Follower

Works with any drawer slide.

SLIDE caBInEt pROFILE DRaWER pROFILELEngtHSmm•inches

tRaVELmm•inches

amm•inches

Bmm•inches

cmm•inches

Dmm•inches

Emm•inches

Fmm•inches

gmm•inches

250•9.84” 250•9.84” – – 195•7.68” 160•6.30” – – 160•6.30” – – –300•11.81” 300•11.81” – 244•9.61” 224•8.82” 192•7.56” 128•5.04” – 192•7.56” – – 32•1.26”350•13.78” 350•13.78” – 296•11.65” 282•11.10” 224•8.82” 128•5.04” – 256•10.08” – 96•3.78” –400•15.75” 400•15.75” 320•12.60” 282•11.10” – 224•8.82” 128•5.04” 25•.98” 288•11.34” – 128•5.04” 32•1.26”450•17.72” 450•17.72” 352•13.86” 282•11.10” – 224•8.82” 128•5.04” 43•1.69” 352•13.86” 271•10.67” 160•6.30” –500•19.69” 500•19.69” 416•16.38” 282•11.10” – 224•8.82” 128•5.04” 29•1.14” 416•16.38” 297•11.69” 192•7.56” –550•21.65” 550•21.65” 448•17.64” 352•13.86” 282•11.10” 224•8.82” 128•5.04” 47•1.85” 448•17.64” 323•12.72” 224•8.82” –600•23.62” 600•23.62” 480•18.90” 352•13.86” 282•11.10” 224•8.82” – 64•2.52” 512•20.16” – 224•8.82” –

paRt # LEngtHLOaD

RatIngOI-5043-10 10” 120lbs.OI-5043-12 12” 120lbs.OI-5043-14 14” 115lbs.OI-5043-16 16” 110lbs.OI-5043-18 18” 105lbs.OI-5043-20 20” 100lbs.OI-5043-22 22” 95lbs.OI-5043-24 24” 90lbs.

16 pieces required per pairScR-6625FHZ

paRt #DRaWERWEIgHt

SIDEcLEaRancE pacKIng

OI-8002 Upto40lbs.* .39”(10mm)-.53”(13.5mm) PerPiece

OI-8001 Upto75lbs. .49”(12.5mm) PerPairOI-8003 Upto150lbs. .49”(12.5mm) PerPair*nOn-HanDED-uSE 2 pIEcES FOR DRaWERS up tO 80 LBS.

EASY CLOSE SOFT CLOSE DAMPENING SYSTEM

100 LB. LOW PROFILE FULL EXTENSION DRAWER SLIDE

F-283SEE PAGE 294 FOR REAR MOUNTING BRACKETS AND SPACERS

•1”overtravel.•AvailableLengths:10”-28”.•ClearZincfinish.•SideMountedwithButterflyrelease.•1/2”sideclearance.

ButtERFLY RELEaSE


SLIDE mOuntIng mEaSuREmEntSLEngtHSmm•inches

tRaVELmm•inches

a1mm•inches

amm•inches

Bmm•inches

cmm•inches

Dmm•inches

Emm•inches

Fmm•inches

gmm•inches

Hmm•inches

250•9-21/32” 254•10” – – – – – 192•7-9/16” – – –300•11-13/16” 305•12” – – – – – 242•9-17/32” 224•8-7/8” – –350•13-25/32” 356•14” 128•5-1/32” – – – – 292•11-1/2” 224•8-7/8” – –400•15-3/4” 406•16” 128•5-1/32” – 320•12-19/32” – – 342•13-15/32” 224•8-7/8” 320•12-19/32” –450•17-23/32” 457•18” 128•5-1/32” – 320•12-19/32” – – 392•15-7/16” 224•8-7/8” 352•13-55/64” –500•19-11/16” 508•20” 128•5-1/32” 192•7-9/16” 352•13-55/64” – – 442•17-13/32” 224•8-7/8” 416•16-5/32” –550•21-21/32” 559•22” 128•5-1/32” 224•8-7/8” – 416•16-3/8” – 492•19-3/8” 224•8-7/8” 352•13-55/64” 448•17-41/64600•23-5/8” 610•24” 128•5-1/32” 224•8-7/8” – 416•16-3/8” – 542•21-11/32” 224•8-7/8” 352•13-55/64” 480•18-57/64”650•25-19/32” 660•26” 128•5-1/32” 224•8-7/8” – 416•16-3/8” 544•21-13/32” 592•23-19/64” 224•8-7/8” 352•13-55/64” 544•21-27/64”700•27-9/16” 711•28” 128•5-1/32” 224•8-7/8” 288•11-11/32” 448•17-3/8” 544•21-13/32” 642•25-9/32” 224•8-7/8” 352•13-55/64” 544•21-27/64”

•EasytopulloutButterflyreleasefordisconnect.•Ballretainerdetentforeasydrawerre-install.•Hold-In-Detent.•1/2”Sidespacing.•Loadrating:100lbs/Pair(22”length).•Screwmountingsystem32mmcompatible.•ComparablewithAccuride®3834andKnape&Vogt®8405.

•Quietestslideonthemarket.

Product Features

Note: Measurements in Metric.508”

1.816”

pROFILE:



100 LB FuLL EXtEnSIOn SLIDEWItH OVER tRaVEL ZInc FInISH (Zn)

paRt # LEngtHLOaD

RatIngREcOmmEnDED DRaWER WIDtH

caRtOn SIZE

OI-4634-10- 10” 120lbs. 10” 20OI-4634-12- 12” 115lbs. 12” 20OI-4634-14- 14” 110lbs. 14” 20OI-4634-16- 16” 105lbs. 16” 20OI-4634-18- 18” 100lbs. 18” 10OI-4634-20- 20” 100lbs. 20” 10OI-4634-22- 22” 100lbs. 22” 10OI-4634-24- 24” 85lbs. 24’ 10OI-4634-26- 26” 80lbs. 26” 10OI-4634-28- 28” 75lbs. 28” 10

(16 pieces required per pair)

ScR-6625FHZ

100 LB. FULL EXTENSION SLIDE 4634

F-284


WItH 1” OVER tRaVEL•Standardwith1”overtravel.•AvailableLengths:10”-28”.•ClearZincFinish.•Sidemountedwithreleaselatchforeasydisconnect.•Holdindetent.•1/2”sidespacing.•Loadrating:100lbs/pair(22”length).•Screwmountingsystem32mmcompatible.•1/2”sideclearance.•ComparablewithDynaslide®4634,Accuride®3834,&Knape&Vogt®8405.

Product Features


pROFILE:

1.816”

.508”

SEE PAGE 294 FOR REAR MOUNTING BRACKETS AND SPACERS



SLIDE mOuntIng mEaSuREmEntSLEngtHSmm•inches

amm•inches

Bmm•inches

cmm•inches

Dmm•inches

Emm•inches

Fmm•inches

gmm•inches

Hmm•inches

Imm•inches

Jmm•inches

Kmm•inches

250•10” – – – – – 192•7.68” 279.4•11.176” 250•10” – – –300•12” 128•5.12” – – – – 242•9.68” 330.2•13.208” 300•12” 224•8.96” – –350•14” – – – – – – – 350•14” – – –400•16” 128•5.12” – – – – 342•13.68” 431.8•17.272” 400•16” 224•8.96” 320•12.8” –450•18” 128•5.12” – – 320•12.8” – 392•15.68” 482.6•19.304” 450•18” 224•8.96” 352•14.08” –500•20” 128•5.12” – – 320•12.8” – 442•17.68” 534.2•21.368” 500•20” 224•8.96” 416.1•16.644” –550•22” 128•5.12” – – – 416•16.64” 492•19.68” 584.2• 23.368” 550•22” 224•8.96” 352•14.08” –600•24” 128•5.12” 224•8.96” – 416•16.64” – 542•21.68” 635•25.4” 600•24” 224•8.96” 352•14.08” 480•19.2”650•26” 128•5.12” 224•8.96” – 416•16.64” 544•21.75” 592•23.68” 685.8•27.432” 650•26” 224•8.96” 352•14.08” 544.1•21.764”700•28” 128•5.12” 224•8.96” 288•11.52” 416•16.64” 544•21.75” 642•25.68” 736.6•29.464” 700•28” 224•8.96” 352•14.08” 544.1•21.764”

paRt # LEngtHLOaD

RatIngREcOmmEnDED DRaWER WIDtH

caRtOn SIZE

OI-9400-10 10” 120lbs. 10” 15PairsOI-9400-12 12” 115lbs. 12” 15PairsOI-9400-14 14” 110lbs. 14” 15PairsOI-9400-16 16” 105lbs. 16” 15PairsOI-9400-18 18” 100lbs. 18” 15PairsOI-9400-20 20” 100lbs. 20” 15PairsOI-9400-22 22” 100lbs. 22” 15PairsOI-9400-24 24” 85lbs. 24” 10PairsOI-9400-26 26” 80lbs. 26” 10PairsOI-9400-28 28” 75lbs. 28” 10Pairs

16 pieces required per pair

ScR-6625FHZ

ECONOMY 100 LB. FULL EXTENSION SLIDE

F-285

WItH puSH REBOunD

See page 247 for our complete screw line.

WItH puSH REBOunD

See page 247 for our complete screw line.

BOnuS FEatuRES:- Only 4mm or (.16”) push

in on drawer front required to activate.

- 3mm (.12”) reveal or gap on the drawer front.

•Lengths:12”to28”.•ClearZincFinish.•BlackFinishavailable whilesupplieslast.•1/2”sideclearance.

SLIDE mOuntIng mEaSuREmEntSSIZE

mm•inchestRaVELmm•inches

amm•inches

Bmm•inches

cmm•inches

Dmm•inches

Emm•inches

LOaDkg•lbs.

300•12” 305•12” 96•3-3/4” – – 136•5-3/8” – 22•50350•14” 356•14” 96•3-3/4” 128•5” – 192•7-9/16” – 27•60400•16” 406•16” 128•5” 144•5-11/16” – 128•5” 240•9-1/2” 27•60450•18” 457•18” 160•6-1/4” 160•6-1/16” – 128•5” 288•11-3/8” 45•100500•20” 508•20” 192•7-9/16” 160•6-1/16” – 192•7-9/16” 336•13-1/4” 45•100550•22” 559•22” 224•8-13/16” 192•7-9/16” 224•8-13/16” – 384•15-1/8” 45•100600•24” 610•24” 224•8-13/16” 224•8-13/16” 256•10-1/16” – 432•17” 45•100650•26” 660•26” 256•10-1/16” 256•10-1/16” 288•11-5/16” – 486•19-1/8” 36•80700•28” 711•28” 256•10-1/16” 320•12-9/16” 320•12-9/16” – 544•21-1/8” 31•70

WItH puSH REBOunD

•Push-Reboundfunctionbuiltinslide,easyforinstallation.

•Rebound2”-5”whenpushdrawer.

•Non-handeddisconnectrelease.

•Electro-Zincplatedwithclearchromate.

•Only4mm(.16”)requiredtofullypushinforopenorclose.

•Loadrating100lbsperpairat22”length(75lbsforepoxyfinish).

Product Features

1.8”

.5”


pROFILE:



maXImum REcOmmEnDED DRaWER WIDtH

ZInc FInISH (Zn) * BLacK FInISH (BK)

paRt # LEngtHLOaD

RatIngcaRtOn

SIZEcaRtOn

SIZEOI-4060-12 12” 50lbs. 19” 20Pairs 20PairsOI-4060-14 14” 60lbs. 21” 20Pairs 20PairsOI-4060-16 16” 60lbs. 23” 20Pairs 20PairsOI-4060-18 18” 100lbs. 25” 10Pairs 10PairsOI-4060-20 20” 100lbs. 27” 10Pairs 10PairsOI-4060-22 22” 100lbs. 29” 10Pairs 10PairsOI-4060-24 24” 100lbs. 31” 10Pairs 10PairsOI-4060-26 26” 80lbs. 33” 10Pairs 10PairsOI-4060-28 28” 70lbs. 35” 10Pairs 10Pairs


ScR-6625FHZ

* 17/32” Side Clearance

100 LB. FULL EXTENSION BALL BEARING SLIDE

F-286


tEStED & cERtIFIED

to anSI/BIFmaspecifications

cycles at 50,000

SLIDE mOuntIng mEaSuREmEntSSIZE

mm•inchestRaVELmm•inches

amm•inches

Bmm•inches

cmm•inches

Dmm•inches

Emm•inches

**300 • 11.81” 260•10.24” – – 166•6.64” 144•5.67” 96•3.78”350 • 13.78” 350•13.78” – – 160•6.30” 144•5.67” 128•5.04”400 • 15.75” 400•15.75” – – 224•8.82” 160•6.30” 160•6.30”450 • 17.72” 450•17.72” – – 256•10.08” 192•7.56” 160•6.30”500 • 19.69” 500•19.69” – 352•13.86” 224•8.82” 192•7.56” 192•7.52”550 • 21.65” 550•21.65” 416•16.38” 352•13.86” 224•8.82” 224•8.82” 224•8.82”600 • 23.62” 600•23.62” 416•16.38” 352•13.86” 224•8.82” 256•10.08” 256•10.08”650 • 25.59” 650•25.59” 512•20.16” 352•13.86” 224•8.82” 256•10.08” 288•11.34”700 • 27.56” 700•27.56” 512•20.16” 352•13.86” 224•8.82” 288•11.34” 288•11.34”

** 25kg. (55 lbs) max. load capacity for 300mm slide.


SEE PAGE 294 FOR REAR MOUNTING BRACKETS AND SPACERS



•Lengths:12”to28”.•ClearZincFinish.• Precisionballbearingslideformedium-dutyapplicationsin

officeandresidentialfurniture.• Drawerprofilefeaturesaneasy tooperatedisconnectfinger releasetrigger.• System32compatiblehole locations.• Drawerslideisnon-handed.• NewECD™easyclose (softclose)device.• 1/2”sideclearance.

WItH EaSY cLOSE (SOFt cLOSE) mEcHanISm

Product Features


ScR-6625FHZ

paRt # LEngtHLOaD

RatIngcaRtOn

SIZEOI-5000-12 12” 100lbs. 10PairsOI-5000-14 14” 100lbs. 10PairsOI-5000-16 16” 100lbs. 10PairsOI-5000-18 18” 100lbs. 10PairsOI-5000-20 20” 95lbs. 10PairsOI-5000-22 22” 90lbs. 10PairsOI-5000-24 24” 85lbs. 10PairsOI-5000-26 26” 50lbs. 10PairsOI-5000-28 28” 75lbs. 10Pairs

100 LB. FULL EXTENSION BALL BEARING SLIDE

F-287

PRODUCT FEATURES:•304gradestainlesssteel.•3memberfullextension.•Ballbearingconstruction.•Frontdisconnect.•Positivestop.•Sidemounting.•Nonhanded.•Screwssoldseparately.

OI-3800S SERIES

OI-4500S SERIES

PRODUCT FEATURES:•304gradestainlesssteel.•3memberfullextension.•Ballbearingconstruction.•Frontdisconnect.•Positivestop.•Sidemounting.•Nonhanded.•Fulltravel.•Screwssoldseparately.

75 lb. Capacity

100 lb. Capacity

PROFILE

PROFILE

PART #SLIDE

LENGTHTRAVELLENGTH

LOAD RATING PER PAIR

OI-3800S-8 7.87” 7.54” 98lbs.OI-3800S-10 9.84” 9.57” 92lbs.OI-3800S-12 11.81” 12” 88lbs.OI-3800S-14 13.78” 14” 84lbs.OI-3800S-16 15.75” 16” 79lbs.OI-3800S-18 17.72” 18” 75lbs.OI-3800S-20 19.69” 20” 73lbs.OI-3800S-22 21.65” 22” 68lbs.OI-3800S-24 23.62” 24” 64lbs.

PART #SLIDE

LENGTHTRAVELLENGTH

LOAD RATING PER PAIR

OI-4500S-10 9.84” 9.57” 115lbs.OI-4500S-12 11.81” 12” 111lbs.OI-4500S-14 13.78” 14” 108lbs.OI-4500S-16 15.75” 16” 104lbs.OI-4500S-18 17.72” 18” 100lbs.OI-4500S-20 19.69” 20” 97lbs.OI-4500S-22 21.65” 22” 95lbs.OI-4500S-24 23.62” 24” 92lbs.OI-4500S-26 25.59” 26” 90lbs.OI-4500S-28 27.56” 28” 87lbs.

SCREW PART #

SCR-8625PHZ#8 x 5/8” Pan

Head Zinc

SCREW PART #

SCR-8625PHZ#8 x 5/8” Pan

Head Zinc

STAINLESS STEEL FULL EXTENSIONDRAWER SLIDES

F-288

• Heavy Duty with 1” over travel extension, quick release brackets for quick drawer removal & anti rebound bumpers.

• 32mm screw mounting system.• Non-handed.• Side mount with mounting brackets included (1 left & 1 right).• Comparable with Accuride® 3640 and Knape & Vogt 8805.• 7/8” side clearance.

Product Features

SLIDE MOUNTING MEASUREMENTSLENGTHmm • inches

A mm • inches

B mm • inches

C mm • inches

D mm • inches

E mm • inches

F mm • inches

Gmm • inches

Hmm • inches

I mm • inches

J mm • inches

K mm • inches

L mm • inches

300 (12”) – 135.4 • 5.416” 179.1 • 7.164” 204.5 • 8.18” 229.9 • 9.20” 45.2 • 1.81” 190.5 • 7.62” 240.4 • 9.616” 152.4 • 6.10” – 20.2 • 0.81” 32.5 • 1.30”350 (14”) – 186.2 • 7.448” 229.9 • 9.196” 255.3 • 10.212” 280.7 • 11.23” 45.2 • 1.81” 190.5 • 7.62” 240.4 • 9.616” 152.4 • 6.10” – 20.2 • 0.81” 32.5 • 1.30”400 (16”) – 237.0 • 9.48” 280.7 • 11.228” 306.1 • 12.244” 331.5 • 13.26” 45.2 • 1.81” 190.5 • 7.62” 240.4 • 9.616” 152.4 • 6.10” – 20.2 • 0.81” 32.5 • 1.30”450 (18”) 190.5 • 7.62” 287.8 • 11.512” 331.5 • 13.26” 356.9 • 14.276” 382.3 • 15.29” 57.9 • 2.32” 266.7 • 10.67” 316.6 • 12.664” 203.2 • 8.13” – 32.9 • 1.32” 32.9 • 1.32” 500 (20”) 215.9 • 8.636” 338.6 • 13.544” 382.3 • 15.292” 407.7 • 16.308” 433.1 • 17.32” 57.9 • 2.32” 266.7 • 10.67” 316.6 • 12.664” 203.2 • 8.13” – 32.9 • 1.32” 32.9 • 1.32”550 (22”) 241.3 • 9.652” 389.4 • 15.576” 433.1 • 17.324” 458.5 • 18.34” 483.9 • 19.36” 70.6 • 2.82” 317.5 • 12.70” 367.4 • 14.696” 254 • 10.16” 171 • 6.84” 45.6 • 1.82” 45.6 • 1.82”600 (24”) 266.7 • 10.668” 440.2 • 17.608” 483.9 • 19.356” 509.3 • 20.372” 534.7 • 21.39” 70.6 • 2.82” 317.5 • 12.70” 367.4 • 14.696” 254 • 10.16” 171.1 • 6.84” 45.6 • 1.82” 45.6 • 1.82”650 (26”) 292.1• 11.684” 491.0 • 19.64” 534.7 • 21.388” 560.1 • 22.404” 585.5 • 23.42” 83.3 • 3.33” 393.7 • 15.75” 443.6 • 17.744” 330.2 • 13.21” 209.1 • 8.36” 58.3 • 2.33” 58.3 • 2.33”700 (28”) 317.5 • 12.7” 541.8 • 21.672” 585.5 • 23.42” 610.9 • 24.436” 636.3 • 25.45” 83.3 • 3.33” 393.7 • 15.75” 443.6 • 17.744” 330.2 • 13.21” 209.1 • 8.36” 58.3 • 2.33” 58.3 • 2.33”


MOUNTING SpECIFICATIONS

pROFILE:

MOUNTING SCREWS SOLD SEpARATELY


pART # LENGTHTRAVEL LENGTH

mm • inchesLOAD

RATINGRECOMMENDED DRAWER WIDTH

CARTON SIZE

OI-74006-12 12” 330.2 • 13” 215 lbs. 12” 5OI-74006-14 14” 381 • 15” 210 lbs. 14” 5OI-74006-16 16” 431.8 • 17” 205 lbs. 16” 5OI-74006-18 18” 482.6 • 19” 200 lbs. 18” 5OI-74006-20 20” 533.4 • 21” 190 lbs. 20” 5OI-74006-22 22” 584.2 • 23” 180 lbs. 22” 5OI-74006-24 24” 635 • 25” 170 lbs. 24” 5OI-74006-26 26” 685.8 • 27” 160 lbs. 26” 5OI-74006-28 28” 736.6 • 29” 150 lbs. 28” 5

SCR-6625FHZ

200 LB. OVERTRAVEL SLIDES - CLEAR ZINC FINISH

HEAVY DUTY FULL EXTENSION SLIDES

F-289

• Single extension/Self closing.• Available Lengths: 10” to 28”.• White epoxy coated finish.• 1/2” Side Clearance.

SUPER STRONG100 LB LOAD RATING

@ 22”!

SIZEinches

DRAWER LENGTH

mm • inches

MIN. INTERNAL CAB. DEPTH

mm • inches

LOSS OF EXTENSIONmm • inches

10” 250 • 9-13/16” 253 • 9-15/16” 85 • 3-3/8”12” 300 • 11-13/16” 303 • 11-7/8” 85 • 3-3/8”14” 350 • 13-3/4 353 • 13-7/8” 85 • 3-3/8”16” 400 • 15-3/4” 403 • 15-7/8” 85 • 3-3/8”18” 450 • 17-3/4” 453 • 17-13/16” 95 • 3-3/4”20” 500 • 19-11/16” 503 • 19-13/16” 102 • 4”22” 550 • 21-5/8” 553 • 21-3/4” 110 • 4-5/16”26” 650 • 25-5/8” 653 • 25-3/4” 120 • 4-3/4”28” 700 • 27-1/2” 703 • 27-5/8” 135 • 5-3/8”

• Load rating: 100 lbs at 22”.• Double out-stop safety feature.• Locked-in position when extended.• 32 mm screw hole pattern system.• 3/4” Travel.• Blum compatible.

Product Features

Features include:• Self-close/Stay-closed action.• Load Capacity: 75 lbs.• 32mm system screw hole pattern.• Durable epoxy coated steel profiles.• Smooth & quiet nylon rollers.• Bottom mounting.• Drawer Extension (Travel):

Length of slide minus 1-1/2”.• 1/2” Side Clearance.

PROFILE:

$uperior Quality At Affordable Price$

note: Measurements in Metric


see pages 267 for our complete screw line

PART # LENGTHLOAD

RATINGRECOMMENDED DRAWER WIDTH

CARTON SIZE

OI-H2030-10 10” 100 lbs. 10” 25 PairsOI-H2030-12 12” 100 lbs. 12” 25 PairsOI-H2030-14 14” 100 lbs. 14” 25 PairsOI-H2030-16 16” 100 lbs. 16” 25 PairsOI-H2030-18 18” 100 lbs. 18” 25 PairsOI-H2030-20 20” 100 lbs. 20” 25 PairsOI-H2030-22 22” 100 lbs. 22” 25 PairsOI-H2030-26 26” 80 lbs. 26” 25 PairsOI-H2030-28 28” 75 lbs. 28” 25 Pairs

(16 pieces required per pair)

SCR-6625FHZ

see PaGe 294 FOr rear MOuntinG BracKets and sPacers

PART # SIZERECOMMENDED DRAWER WIDTH

OI-1500-10 10” 10”OI-1500-12 12” 12”OI-1500-14 14” 14”OI-1500-16 16” 16”OI-1500-18 18” 18”OI-1500-20 20” 20”OI-1500-22 22” 22”OI-1500-24 24” 24”

PREMIUM EURO SLIDE

EURO SLIDES

F-290

EASY CLOSE DAMPENING CYLINDER

TOP RAIL

BOTTOM RAIL

•AmericA’sstAndArd-Ideally suited for “Standard” Cabinet Depths!•superior construction - Solid Delrin (Encased Steel Ball

Bearings) Bearings provides the best solution for heavy-weight full-extension movement!

•smooTh ACTION - Provides quite movement, even under heavy loads!•mAintenAnce FREE - (Note: Do not lubricate any part of the slide).•durAbility - LGA tested according to DIN 4554 Standards @ 50,000

cycles.•nodeflection in fully extended position!•ThetopslideprovidesLateralStability,thuspantrycontentswillnotfall

out when slide is engaged.•TheEZ CLOSE SYSTEM is an automatic/self-closing and slam resistant

function and will not be compromised by varying load conditions. During the last 75mm of the closing motion the pull-out is decelerated and then softly pulled completely closed.

•Horizontal&VerticalAdjustment.•FloorMounted(withTopSlide).•BackStopIncluded.•Material/Finish:Steel,SilverPowderCoated.•Top slide uses #6 countersink screws - bottom slide uses 1/4. 20Machinescrews&nutsand#8screwsnotincluded.

Load CapaCity:

250 Lbs

1.58”

.52”

2.36”

1” 1.46”

.08”1.48”.16”

.08”

1.56”

1.56”

.08”.08”

1.48”

BOTTOM SLIDE

TOP SLIDE

Ideally suited for standard cabinet depths

pRodUCt FEatUREs:

NEWNow

INcludedwith each

slide

PART # LENGTh EXTENSION WEIGhT

BY LBS.MM IN. MM IN.OI-771-22 575 22.64” 559 22.01” 19.27

PROGRESSIVE ACTION FULL EXTENSIONPANTRY PULL OUT SLIDE WITH TOP SLIDE

F-291

pRodUCt FEatUREs:•175lb.dynamic.•Delrinencasedsteelballbearings.•Quick&easyinstallationthroughpatentedsystem.•Quietmovement.•Integratedhorizontalandverticaladjustment.•Recommendedforcabinetheightsupto59.6”.•Maintenancefree,(Donotlubricateanypartoftheslide).•Double-sidedcaptiveprofile.•Material:Steel,whitepowdercoated.•Easyclosedeviceintegratedtobothtop&bottomslide.

LENGTh EXT A B C D E F G h I J KWEIGhT PER SET

MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN KG LBS400(16’) 15.75 385 15.16 133 5.24 261 10.28 357 14.06 - - 293 11.54 - - 133 5.24 165 6.50 261 10.21 293 11.54 306 12.05 4.90 10.78450(18”) 17.72 435 17.13 133 5.24 261 10.28 421 16.58 - - - - 357 14.06 133 5.24 165 6.50 261 10.21 293 11.54 306 12.05 5.40 11.88500 (20”) 19.69 485 19.10 165 6.50 325 12.78 453 17.84 - - - - 389 15.32 197 7.76 229 9.02 357 14.06 389 15.32 402 15.83 6.10 13.42550 (22”) 21.65 535 21.06 197 7.76 357 14.06 517 20.35 - - - - 453 17.84 197 7.76 229 9.02 357 14.06 389 15.32 402 15.83 6.60 14.52600(24”) 23.62 585 23.03 197 7.76 389 15.32 549 21.61 229 9.02 - - 485 19.09 197 7.76 229 9.02 357 14.06 389 15.32 402 15.83 7.15 15.73650(26”) 25.59 635 25.00 229 9.02 421 16.58 613 24.13 261 10.28 - - 549 21.61 197 7.76 229 9.02 357 14.06 389 15.32 402 15.83 7.75 17.05700(28”) 27.56 685 26.97 261 10.28 485 19.09 645 25.39 293 11.54 - - 581 22.87 197 7.76 229 9.02 357 14.06 389 15.32 402 15.83 8.25 18.15750 (30”) 29.53 735 28.94 261 10.28 485 19.09 709 27.91 325 12.78 - - 645 25.39 197 7.76 229 9.02 357 14.06 389 15.32 402 15.83 895 19.69pAcKinGunit:1setperboxwithmountinginstructions

PART # LENGThWEIGhT BY LBS.

OI-775-16 16” 11OI-775-18 18” 12OI-775-20 20” 13.5OI-775-22 22” 14.5OI-775-24 24” 16OI-775-26 26” 17OI-775-28 28” 18OI-775-30 30” 20

Load CapaCity:

175 Lbs

75 LB. FULL EXTENSION SOFT CLOSECONCEALED UNDERMOUNT SLIDE

F-292

OI-3600 SERIESMaterial: White Powder Coated Cold Rolled Steel

PRODUCT FEATURES:•Fullextensionwithsteelballbearings.•Neweasycloseautomaticselfclosing&slamresistant.•Versatile,worksinmostkitchenbasecabinets&givesuser flexibilityinconfigurationsofbins.•6-wayadjustablefrontbracketIsreversibleforanydoorapplication.

Floor Mount

Available in White

5349-18DM-2RV-18PB-1 RV-18PB-2-S

RV CONTAINERSShown with RV-DM-KIT

See pages 379-383

for our complete line of Waste Containers

Side Mount

PART # DESCRIPTIONWEIGHT

PER CARTONRV-18PB-1 14-7/8”Wx22”Dx19-1/4”HSingle35Qt.WasteContainer 13lbs.

RV-18PB2-S 14-3/8”Wx22”Dx19-1/4”HDouble35Qt.WasteContainerw/fullextension 14lbs.5349-18DM-2 14-7/8”Wx22”Dx19-1/2”HDouble35Qt.WhiteWasteContainer --

MOUNTINGTYPE

LENGTH EXTENSION LOAD CAPACITYPART # MM IN MM IN

OI-3600-F Floor 575 22.64” 575 22.64” 100lbs.OI-3600-S Side 575 22.64” 575 22.64” 100lbs.

PULL-OUT WASTE CONTAINERS

WASTE CONTAINER PULL-OUT SLIDES

F-293

Sides and fronts/backs are 5/8” solid edge glued birch components. Straight and true, our drawer components are finished with a durable UV coating and available in 6 sizes for any drawer application. Side lengths are 22” (558.8mm) and fronts/backs are 67” (1701.8mm). Drawer bottoms are also available in 5mm Birch Plywood (BIBB grade).

Height

R1/16 (R1.6mm)

9/32” (7.0mm)

33/64” (13.1mm)

5/8 (15.9mm)

Ends can be joined by gluing, nailing or cutting out dovetail joinery.

DRAWER SIDES, FRONTS, BACKS

Solid Birch Drawer Construction Components with Clear Catalyzed Finish (Natural Light)

Use on drawer fronts to provide realignment facility on fronts attached to 4-sided drawers. Housing is nylon with die cast threaded insert screw, plated steel. Housing is hammer driven into a 25MM prebored hole. Screw attaches 4th side of drawer to allow adjustment of front until fully tightened. Screw size is 7/8” x 8/32”. FEATURES: 2mm of adjustment in vertical or horizontal directions. 25mm hole boring in drawer front. Large head screw attachment to 4th side of drawer. Simple to use.

DRAWER FRONT ADJUSTER• Simple - Cost Effective

• Eliminates need for drawer slides• Ideally suited for applications limited in space

SpECIFICATIONS FOR RuNNER WhEEl Colors: Black & Brown

Drilled Hole Required: 8mm x 11mm deep

Requires 8mm x 11mm drilled hole

RUNNER WHEEL

DRAWER BOTTOM

DRAWER SIDESPART # HEIGHT LENGTH BOX QTY.

DS-2-BIR 2-1/2” 22” 20 pcs.DS-3-BIR 3-1/2” 22” 20 pcs.DS-4-BIR 4” 22” 20 pcs.DS-6-BIR 6” 22” 20 pcs.DS-8-BIR 8” 22” 10 pcs.

DS-10-BIR 10” 22” 10 pcs.* DS-10-BIR-NG 10” 22” 10 pcs.

* products with an NG part number are supplied with no groove and have a finished radius on both sides for custom heights.

DRAWER BOTTOMPART # HEIGHT LENGTH BOX QTY.DB-2160 21-7/8” 60” 3 pcs.

DRAWER FRONTS/BACKSPART # HEIGHT LENGTH BOX QTY.

DF-2-BIR-8 2-1/2” 96” 5 pcs.DF-3-BIR-8 3-1/2” 96” 5 pcs.DF-4-BIR-8 4” 96” 5 pcs.DF-6-BIR-8 6” 96” 5 pcs.DF-8-BIR-8 8” 96” 3 pcs.DF-10-BIR-8 10” 96” 3 pcs.

* DF-10-BIR-NG-8 10” 96” 3 pcs.* products with an NG part number are supplied with no groove

and have a square edge on both sides for custom heights.

PART # COLOR6310-BR Brown

PART # COLOROP-0900 Black

0900 Brown

FURNITURE ASSEMBLYFASTENERS & ACCESSORIES

P R O D U C T S

SOLID BIRCH DRAWER PARTS

F-294

REAR MOUNTSOCKET

METAL REAR MOUNTING BRACKETS

ADJUSTABLE UNDER MOUNT REAR SOCKET

FULL EXTENSIONDRAWER SLIDE SPACER

UNDER MOUNTDRAWER SLIDE SPACER

STANDARDDRAWER SLIDE SPACER

FIXED REAR SOCKETS

PRODUCT FEATURES:• Replaces commonly used block of wood for mounting drawer glides.• Can be used flush with face frame edge and mounted to back of drawer glide.• Can be used 2 per side in frameless cabinets to adjust drawer glides.

FIXED FULL EXTENSION REAR SOCKET

LEFTSOCKET RIGHT

SOCKET

WORKS WITH DRAWER SLIDE SETS:

OI-2030


OI-2030


OI-5000


OI-4634, OI-9400, OI-4500S, OI-4070


OI-4634, OI-9400, OI-4500S, OI-4070


OI-1500, OI-H2030


OI-1500, OI-H2030


OI-1500, OI-H2030


OI-4634, OI-9400

All bumpers stocked in clear. Please inquire for colors. Colors sold in full cases only.

1000 PIECE MINIMUM ORDER

PAB-001 PAB-002PAB-003

PAB-006PAB-106

PAB-008PAB-012PAB-112

PAB-078

PAB-018PAB-023

PAB-044 PAB-009

MILLER FASTBLOCK™MILLER FASTBLOCK™

PART # DESCRIPTIONFC-MFB-WH Miller Fast Block 2 pc. pack

FC-MFB-WH-100 Miller Fast Block 100 pc. pack

OI-3616

OI-RMB

OI-5000B-SOI-RMB-S OI-6402

OI-627 OI-680

OI-3640 OI-3602

PART # WIDTH HEIGHT CASE QUANTITYPAB-001CL .500” .140” 5000PAB-002CL .312” .085” 5400PAB-003CL .440” .200” 5082PAB-006CL .375” .150” 7200PAB-008CL .500” .120” 5000PAB-009CL .880” .400” 1440PAB-012CL .500” .140” 5000PAB-018CL .500” .230” 5000PAB-023CL .810” .300” 2646PAB-044CL .750” .160” 2450PAB-078CL .400” .0130” 7200

SOFT SERIES -Softer bumper for extra sound deadening properties

PAB-106CL .375” .150” 7200PAB-112CL .500” .140” 5000

DRAWER SLIDE SPACERS

REAR MOUNT SOCKETS

SPACERS

POLYURETHANE ADHESIVE BUMPERS

NEW!

F-295

PRODUCT FEATURES:• Face frame hinges with 3-dimensional adjustment.• 42mm drilling pattern.• 1 piece hinge and base plate combination.• For door thickness up to 3/4”.• Front locating tabs position hinge on face frame.• Available with either wrap around or side mount base plate.

DRILLING DEPTH 7/16” (10.5mm)

42mm DRILLING PATTERN

TEC 864 ONE PIECE HINGE108º OPENING ANGLE - 1/4” TO 1” OVERLAY

FOR FACE FRAME APPLICATIONS

PRODUCT FEATURES:• Works for face frame cabinets on all overlays and frameless cabinets on full overlay doors.• Brushed nickel finish blends well with hinge finish.• Manually adjustable to desired closing speed.• Mounts easy in corners with #6 x 3/4” wood screws included.• 11/16” (17mm) Clearance required.• Ideal when upgrading existing cabinets or working with other hinges options.

WRAP AROUNDPART# OVERLAY PLATE TYPE

VS8-108-25W 1/4”

DOWELLED

VS8-108-50W 1/2”VS8-108-75W 3/4”VS8-108-100W 1”VS8-108-125W 1-1/4”VS8-108-138W 1-3/8”VS8-108-150W 1-1/2”VS-108-25W 1/4”

SCREW-ON

VS-108-50W 1/2”VS-108-75W 3/4”VS-108-125W 1-1/4”VS-108-138W 1-3/8”VS-108-150W 1-1/2”

SIDE MOUNTPART# OVERLAY PLATE TYPE

VS8-108-25S 1/4”

DOWELLED

VS8-108-50S 1/2”VS8-108-75S 3/4”VS8-108-100S 1”VS8-108-125S 1-1/4”VS8-108-138S 1-3/8”VS8-108-150S 1-1/2”VS-108-25S 1/4”

SCREW-ON

VS-108-50S 1/2”VS-108-75S 3/4”VS-108-100S 1”VS-108-125S 1-1/4”VS-108-138S 1-3/8”VS-108-150S 1-1/2”

PART# DESCRIPTIONUNI-SFT Individual Polybag

UNI-SFT-25 25 piece bag

UNI-SOFT SOFT CLOSE ADAPTOR

HINGES

F-296

DOWELED (Knock-In)

PRODUCT FEATURES:• All Metal, Nickel Plated, self closing hinges.• Full overlay, half overlay, and in-set options.• Screw-on or doweled (knock-in) options available.• All hinges work with soft close system - see individual charts below.• Plate options available for Face Frame or Frameless applications.

SCREW-ONBORING PATTERN

DOWELEDOVERALL CUP SIDE VIEW

Mimimum cup depth11mm or .44”

SCREW-ON

100° OPENINGSPECIFICATIONS:

INSET

FULL OVERLAY

HALF OVERLAY INSET

FULL OVERLAY

HALF OVERLAY

Door Size Guidelines

Hinges

• Works with up to 7/8” (22mm) thick door.

* INSTALLATION DIMENSIONS AVAILABLE UPON REQUEST. ALL MEASUREMENTS ARE IN MILLIMETERS.

PLATES FOR FACE FRAME APPLICATIONS

PLATES FORFRAMELESS APPLICATIONS

SOFTCLOSE

A, B, C D, E See Option A, pg. 301



SOFTCLOSE


NEXIS CLICK-ON QUICK MOUNTING HINGES

PART# DESCRIPTIONPCS. PER CARTON

CS4-100S-F Full Overlay (00) 250CS4-100S-H Half Overlay (08) 250CS4-100S-I Inset (15) 250


CS4-100D-F Full Overlay (00) 250CS4-100D-H Half Overlay (08) 250CS4-100D-I Inset (15) 250

CS-SCREW6 x 5/8” Zinc Plated Screw 500 pcs. per carton

HINGES

F-297

FULL OVERLAY HALF OVERLAY FULL OVERLAY HALF OVERLAY

FULL OVERLAY

HALF OVERLAY

FULL OVERLAY

HALF OVERLAYINSET INSET



Mimimum cup depth11.8mm or .47”



COMPARABLE TO BLUM






COMPARABLE TO BLUM




SOFTCLOSE




SOFTCLOSE




SOFTCLOSE




SOFTCLOSE


DOWELED (Knock-In)SCREW-ON

DOWELED (Knock-In)SCREW-ON



CS22-110S-F Full Overlay (00) 250CS22-110S-H Half Overlay (08) 250CS04-110S-I Inset (15) 250


CS22-110D-F Full Overlay (00) 250CS22-110D-H Half Overlay (08) 250CS04-110D-I Inset (15) 250


CS29-125S-F Full Overlay (00) 250CS29-125S-H Half Overlay (08) 250


CS29-125D-F Full Overlay (00) 250CS29-125D-H Half Overlay (08) 250


HINGES

F-298

EASY TO INSTALL!1. Insert Twin NT hinges

into the door boring.2. Close the flap of the

hinge cup, and you are done!

PRODUCT FEATURES:• Twin NT hinges are perfect for door materials such as Particle Board, Solid Wood and MDF.• Twin NT securely fits and does not allow twisting of the hinge due to a 3-point connection of the hinge cup.• All Metal Nickel Plated, self closing hinges.• Full Overlay and Half Overlay options.• All hinges work with Soft Close-see individual charts below.• Plate Options available for Face Frame and Frameless Options.

1. 5.4.3.2.

FITS BOTH HOLE PATTERNS

HALF OVERLAYFULL OVERLAY

ALL MEASUREMENTS ARE IN MILLIMETERS.

170° OPENINGCOMPARABLE TO BLUM



Maximum Cup Depth is 11.5mm or .46”





SOFTCLOSE

A, B, C D, E See Option B, pg. 301

SCREW-ON DOWELED (Knock-In)

100% FINGERPROTECTION

FULL OVERLAY HALF OVERLAY FULL OVERLAY HALF OVERLAY




SPECIFICATIONS:

• Works with up to 1” (26mm) thick door.



SOFTCLOSE




SOFTCLOSE


• Does not work with CS-SOFT




CST22-110-F Full Overlay (00) 125CST22-110-H Half Overlay (08) 125


CS65-170D-F Full Overlay (00) 250CS65-170D-H Half Overlay (08) 250


CS65-170S-F Full Overlay (00) 250CS65-170S-H Half Overlay (08) 250

NEXIS IMPRESSOWITH “TOOL-LESS” QUICK MOUNTING TECHNOLOGY

HINGES

F-299

FULL OVERLAY HALF OVERLAY

100% FINGERPROTECTION

FULL OVERLAY HALF OVERLAY




SOFTCLOSE




Minimum Cup Depth is 12mm or .48”


• Works with up to 3/4” (19mm) thick door.FITS BOTH HOLE PATTERNS



SOFTCLOSE




Minimum Cup Depth is 11mm or .44”

170° OPENING

• Works with up to 1” (26mm) thick door.FITS BOTH HOLE PATTERNS

NEXIS IMPRESSOWITH “TOOL-LESS” QUICK MOUNTING TECHNOLOGY


CST65-170-F Full Overlay (00) 50CST65-170-H Half Overlay (08) |50



CST29-125-F Full Overlay (00) 125CST29-125-H Half Overlay (08) 125

HINGES

F-300

• Nickel Plated.• Adjustments can be made independently: up and down.

D. SUPER CLICK

E. 3D ADJUSTABLE EURO CAM

• Nickel Plated.• 6 way adjustment: up and down, in and out, and side to side.• Height and depth adjustable.

B. 3D CAMPLATE

A. SPECIAL PLATE FOR FACE FRAME

C. BEADED INSET

• Height and depth adjustable.• Mounts with wood screws (not included).

• All adjustments can be made independently.• Mounts with wood screws (not included).


NEXIS MOUNTING PLATESNEXIS MOUNTING PLATES

Boring distance will affect overlay result; always

prepare a mock up before boring doors.

HINGES FULL - 00 HALF - 08 INSET - 15

FRAMELESSPLATES

“00” Full - 3/4” Half - 3/4” Inset“02” Full - 5/8” Half - 5/8” Inset“08” Half Inset N/A“18” Inset N/A N/A

FACE FRAMEPLATES

“00” 5/8” - 3/4” 3/8” N/A“04” 1/2” 1/4” N/A“02” N/A Inset N/A

PLEASE REFER TO CHART BELOW WHEN PURCHASING PLATES FOR HINGES DIFFERENT COMBINATIONS WILL YIELD DIFFERENT RESULTS

NEXIS MOUNTING PLATES

PART#HINGE TYPE

DOOROVERLAY

PLATE TYPE

PCS. PER CARTON

CSP-FR55-00 Click-on Twin Full, Half, Inset “00” 250CSP-FR55-08 Click-on Twin Half, Inset “08” 250CSP-FR55-18 Click-on Twin Inset Only “18” 250

PART#HINGE TYPE

DOOROVERLAY

PLATE TYPE

PCS. PER CARTON

CSP-FR70-00 Click-on Twin Full, Half, Inset “00” 250CSP-FR70-08 Click-on Twin Half, Inset “08” 250

PART#HINGE TYPE

DOOROVERLAY

PLATE TYPE

PCS. PER CARTON

CSP-FF88-00 Click-on Twin 1/8” to 3/4” “00” 250CSP-FF88-04 Click-on Twin 1/8” to 3/4” “04” 250

PART#HINGE TYPE

DOOROVERLAY

PLATE TYPE

PCS. PER CARTON

CSP-FF91-00 Click-on Twin 1/8” to 3/4” “00” 250CSP-FF91-04 Click-on Twin 1/8” to 3/4” “04” 250

PART#HINGE TYPE

DOOROVERLAY

PLATE TYPE

PCS. PER CARTON

CSP-FF90-02 Click-on Twin Inset “02” 250


FOR FRAMELESS APPLICATIONS

FOR FACE FRAME APPLICATIONS

HINGES

F-301

OPTION A: SOFT CLOSE FOR CS* HINGES

EACH SET INCLUDES:1 Soft Close CS adapter with pre-mounted Soft Close.1 hinge cup cover cap.2 hinge arm cover caps.

OPTION B: SOFT CLOSE FOR CST* HINGES

EACH SET INCLUDES:1 Soft Close CST adapter.1 Soft Close CST damper.2 hinge arm cover caps.


This unique design defines a new closing of doors. The motion of the doors is softly slowed down and the door self closes softly and quietly. • Toolless. • Quick and easy to install. • Minimum one set required per two hinges.

DOWELED (Knock-In)

FULL OVERLAY



SOFTCLOSE

A, B, C D, E See Option A, above.



SOFTCLOSE

A, B, C D, E See Option A, above.

HALF OVERLAY INSET

45° CORNER

90° CORNER PIE CUT CORNER

BORING PATTERN OVERALL CUP SIDE VIEWSPECIFICATIONS:

BORING PATTERN OVERALL CUP SIDE VIEWSPECIFICATIONS: CS/D-PCC

BORING PATTERN OVERALL CUP SIDE VIEWSPECIFICATIONS: CS/45-IV & CS/90-IV

Works with doors up to 1-1/8” thick.

NOTE: DOES NOT WORk WITH 170° HINGES

95° OPENING FOR THICK DOORS DOWELED (Knock-In)

SOFT CLOSE SYSTEM

PART# CS-SOFT1 setFull Carton (125 sets)

PART# CST-SOFT1 setFull Carton (125 sets)

CS-SCREW6 x 5/8” zinc plated screw for “CS” hinges.500 per carton



CS5/45-IV 45° Corner 125CS5/90-IV 90° Corner 125CS/D-PCC Pie Cut Corner 125


CS5-95D-F Full Overlay (00) Thick Door 250CS5-95D-H Half Overlay (08) Thick Door 250CS5-95D-I Inset (15) Thick Door 250

SPECIALITY HINGES

CORNER HINGES

HINGES

F-302

CONCEALED METAL HINGE

OPI SERIES - SOFT CLOSE PNEUMATIC HINGE

The CONCEALED METAL HINGE is surface mounted - this means no routing of door or cabinet. Made of cold rolled steel with a bright nickel finish and a stainless steel spring. All pins & rivets are zinc plated for long life.

ONE HINGES DOES IT ALL; FITS ANY FRAME-LESS CABINET.

• Overlay, adjustable from 0 to 3/4".• 3/8" inset.• Full inset.• Allows door to open over 150°.• Built-in closing mechanism.• Screws not included.

3/4" OVERLAY FULL INSET 3/8" INSET

*Application drawings are based on use with a 3/4" thick door.

*AppLIcATIONS:

pRODUcT FEATURES:• Softens the impact of the door against

the cabinet.• Can be recessed into the cabinet side or

mounted to the table.• Suitable for double doors, inset doors &

face frame applications.• Use 2 dampers for door heights over 3’.

MEDIUM DUTY

SIDE MOUNTED

RECESSED

CLIP-ON SOFT CLOSE HINGE ATTACHMENTpRODUcT FEATURES:• Grey plastic.• Left and Right side.• Can be adjusted for various door clearances.• Suitable for most Euro Hinges.

pRODUcT FEATURES:• NO MORE SLAMMED DOORS! Pneumatic cylinder provides soft closing action.• NO EXTRA ACCESSORIES! Built-in cylinder makes closing doors easy.• Clip on system.• Screws included.

PART#SG-225

PART#SFT-MAD-GY

PART# DESCRIPTIONSFT-CLIP-R RightSFT-CLIP-L Left

PART# DESCRIPTION

SFT-HINGE-F 110° Full Overlay Hingewith Plate

MISCELLANEOUS HINGES

DAMPING ACCESSORIES FOR CABINET DOORS

SOFT CLOSE DAMPERS

F-303

1/2” OVERLAY INSTITUTIONAL HINGE

* 2 screws required for

hinge arm mounting

• All metal diecast construction for extreme durability in black & nickel finishes.

• Toolless snap-on mounting for quick & easy installation.

• Side-to-Side adjustment of -2mm(1/16”) & height adjustment of +/-2mm(1/16”).

• Hinge cup has 35mm diameter with a 45/9.5mm boring pattern (similar to Blum).

• Designed for Frameless Cabinet Construction.

32mm OVERLAY INSTITUTIONAL HINGEGloss White, Gloss Black, Dull Chrome

DOUBLE ACTION SPRING HINGE

• Allows door to swing back and forth.• For doors up to 1-1/8" thick.• Screws & instructions included.• Dimensions: 4-7/8" high x 3-1/2" wide.

NO-BORE GLASS DOOR HINGE

• For 1/4” Glass.

• Opening angle 90°.• For flap door thickness up to 20mm.• Cup boring cover.• Bottom and Flap door are flush inside

the cabinet when doors are open.• 3-D Adjustable.

FLAP DOOR HINGE

• 2-3/4” Five Knuckle Hinge.

• Designed for 32mm hole system.

• Radius ground hospital tips.

• Matte Chrome finish.

Made in USA.

• 2 3/4" Five Knuckle Hinge.• Radius Ground Hospital Tips

For Increased Safety.• Designed for 32mm Hole

System.• Radius Corners For Easy

Mortising• ANSI/BHMA A156.9 Grade 1.

44 lb. Load

RatingMaterial: Steel Material: Steel

Material: Steel Material: SteelMaterial:

Steel

• Opening angles range from 180° - 270° depending on your application.

• Meets ANSI/BHMA A 156.9 - 2003 Grade 1 Requirements when the screw & adjustment tabs are in place.

• Cover caps (included) conceal mounting screws.

• One hinge cup works arms.

PRODUCT FEATURES:

PART #TYPE BLACK NICKEL

HINGE CUP SCREW-ON MBS-8010-BK MBS-8010-NDOWELLED MBD-8010-BK MBD-8010-N

FULL OVERLAY HINGE ARM 270° MB-8310-BK MB-8310-N

HALF OVERLAY HINGE ARM 230° MB-8510-BK MB-8510-N

COMMON PANEL (INSET) HINGE ARM 180° MB-8610-BK MB-8610-NEURO-SCREWS FOR

HINGE ARM N/A MB-SCREW*#6 x 13.5mm Euro Screw

PART#DIMENSIONS

A B CIH-E60- 3/4" 3/4" 23/32"IH-G60- 3/4" 13/16" 23/32"

PART# COLORDAH-BRS BrassDAH-BLK Black

PART # COLOR30023-CHR Chrome

PART#PCS. PER CARTON

FLAP-735 100

DIMENSIONSPART# A B C

INSHIN-34 3/4” 3/4” 23/32”

GRASS INSTITUTIONAL HINGES

F-304

So! Where do you want the holes?Euro-32

TemplateConcealed-Hinge

Boring Tool

Euro-Handle-ItHandle & Knob Drilling Tool• V-notch in fence for use in installing

handles at a 45-degree angle.• English and metric scales for use on all

handles.• Height adjustment to center of a 12” high

drawer front.• Center reference line for extra wide

drawer fronts.• Movable positioning stop for use on

drawer fronts of the same size.• Installs handles as large as 24” (600mm).• Made of polycarbonate (jet aircraft canopy

material). The tool is virtually unbreakable.EHIT

Euro-JigConcealed Hinge Installation Tool• Quickly and accurately locates European

concealed hinge plates.• Lightweight, durable construction.• Will locate all makes of concealed hinges

regardless of cup size.• “V” locator templates set to door hinge arm,

then transfers layout to cabinet.• Minimal setup time allows for changing hinge

locations quickly.• Works for overlay and inset conditions.• Will effectively set doors up to 50” tall.• Length, 28-3/4”, designed to clear existing

countertops make Euro-Jig ideal for refacing operations.

• Requires Euro-Bit Self-Centering Drilling Tool (EB)

EJ200

Euro-UniguideFor fast, accurate drawer guide positioning• Locates pilot holes for all brands of drawer guides:

European and American made.• Infinite vertical adjustment for various drawer sizes

and layouts.• For use with regular and full extension guides.• Positions guides for overlay and inset conditions.• Install 1 to 4 guides in a single operation.• No vertical layout marks required as tool is set

directly to tape measure.• Length, 28-3/4”, designed to clear existing counter-

tops, making Uniguide ideal for refacing operations.• Requires Euro-Bit Self-Centering Drilling Tool & Bit.EUG

Euro Trimmer• Laminate trimmer with

Teflon® square bearing. ET 1/2” Dia. x 1/4” Shank ET3/4 3/4” Dia. x 1/4” Shank

Replacement BearingsET1/2-Bearing1/2” Bearing OnlyET3/4-Bearing3/4” Bearing Only

Euro-BitSelf-Centering Drilling Tool• Use with other tools shown.• Tip has excellent chip ejection.• Interchangeable bits: 1/4” Bit – 1/4” shelf pins. 5mm Bit – 5mm shelf pins or system screws. 7/64” Bit Adapter – designed to be used with standard 7/64”

bit (not included).• Uses carbide tipped brad point bits or a

7/64” bit (not included).EB (EURO BIT)EB2570 (1/4” X 7mm Bit)EB570 (5mm x 70mm Bit)7/64 x 40mm (7/64” x 40mm Bit adaptor)

• Use with any 3/8” drill motor or drill press.• Compact and portable, ideal for shop and

field operations.• Automatic boring depth stop.• Special non-skid base protect work and

inhibits movement during boring operation.• Centerline mark provides easy alignment.• 32mm compatible.• Uses standard 35mm x 37 mm boring bit,

not included.ED50-UED-KIT (drill press kit)ED3557 (35mm x 57mm Bit)

Euro-32 Template• To Drill 5mm or 1/4” holes.• Use on cabinet parts or

constructed cabinets.• Use with the Euro-Bit Self-

Centering Drilling Tool (EB).• Drill for carcass assembly.• Use for 32mm construction.• Aluminum bushings for

long life.E32T ....

MOUNTING TEMPLATES & BORING TOOLS

F-305

For Our Complete Line

Of Screws See Page 267

AVAILABLE FINISHES: Nickel, Brite Brass, *304 Grade Stainless Steel, Statuary Bronze, Electro Black Lacquered

4 SIZES:1-1/4"x 72", 1-1/2" x 72", 2" x 72" & 1-1/4" x 100'

A

B C

D

Steel Pin

NOTE: All measurements are approximate; please refrain from drilling your holes

until product is received.

Electro Black

Laquered (BLQ)

Statuary Bronze (BZ)

304 Grade

Stainless Steel (SS)

Nickel (N)

Brite Brass (B)

72 screws are required per piece.

DIMENSIONSA B C D

1 1-1/4" 2" 1/2" .750"2 1-1/2" 2" 1/2" .876"3 2" 2" 1/2" 1.13"4 1-1/4" 2" 1/2" .75"

PIANO HINGE FLAT PHILLIPS SCREWS

If you are interested in aluminum hinges or

custom lengths, please inquire.

1-1/4" x .030* x 72"PART # FINISH

PH-28-72N NickelPH-28-72B Brite Brass

PH-28-72BZ Statuary Bronze

PH-28-72BLQ Electro Black Lacquered

PH-28-72SS *304 Grade Stainless Steel

1-1/2" x .040* x 72"PART # FINISH


PH-40-72BZ Statuary BronzePH-40-72BLQ Electro Black

Lacquered


2" x .040* x 72"PART # FINISH


PH-64-72BZ Statuary BronzePH-64-72BLQ Electro Black

Lacquered


* All Stainless Steel Hinges are .037" Thick

100 FT. COILS1-1/4" x .030" x 100' PART # FINISH


SOLD IN FULL COILS ONLY!

PART # FINISH WORKS WITH HEAD SIZESCR-5625FHZ Zinc all piano hinges

except PH-*-72SS#5 x 5/8"

SCR-5625FHB Black #5 x 5/8"SCR-6625FHZ Zinc only PH-*-72SS

(stainless steel hole is larger)#6 x 5/8"

1

2

3

4

CONTINUOUS STEEL PIANO HINGE

F-306

MONSTER HINGE™

TOTALLY CLEAR FLAT HINGES EXTRUDED HINGE

• Replacesmetalhingesthatrequireontodrill,taporrivet.

• Outerbondingsurfaceiswideforaddedbondingstrength.

• Easilycutstosmallsizewithoutfallingapart.

Clear or Black 12” Long x 1-3/4” Wide

PLASTIC PIANO HINGE ACRYLIC HASPClear, Black or White

2-3/8” Long x 1-1/16” Wide x 1/8” ThickBottomsectionofhaspisreversibleforeithercorner

orflatmounting.

Predetermine assembly before inserting pin

completely!

PLASTIC HINGES

CLEAR ACRYLIC/PVC5 Ft. Lengths

CLEAR P.E.T.G./PVC with glue groove5 Ft. Lengths

1.375

.50 .50.375

CLEAR URETHANE & ACRYLIC4 Ft. Lengths U.V. Stabilized for Outdoor Use!

CLEAR ACRYLIC HINGE POLYPROPYLENE HINGE

Won’t Rust - Quiet - Long Life

175-150150-1375END VIEW

TOP VIEW

Larger Quantities Available - Please Inquire

CLEAR ECONOMY ACRYLIC HINGE

END VIEW

TOP VIEW

Black or WhiteScrew Size Recommended

#10 Countersunk (not included)

Material: Acrylic DR101 (Clear), ABS (Black)Indestructible:New“patentpending”designmakesthishingevirtuallyunbreakable!Noothersimilarhingeonthemarketcomesclosetothestrengthofthisdynamichinge!Ribbed:Wehaveeliminatedthebarrelsection,theweakestpartofahinge,andreplacedwithlargeribbedsectionsunlikeanyhingeinthedisplayindustryforincrediblestrength!Largerpindiameter(.190”dia.)too!Size:1-5/16”Lx2”Wx1/2”T(33mmx51mmx13mm)

PART # MATERIALPH-175-12CL AcrylicPH-175-12BK ABS

PART # COLORHSP-110-CL ClearHSP-110-BK BlackHSP-110-WH White

PART #9888H

PART #F2000-CL

PART #696H

PART #150-1375175-150

PART # COLOR200-200-WH White200-200-BK Black

PART #EC175-150

PART # DESCRIPTIONMONSTER-HINGE-CL ClearAcrylic1-5/16”Lx2”Wx1/2”ThickHingeMONSTER-HINGE-BK BlackABS1-5/16”Lx2”Wx1/2”ThickHinge

HINGES

F-307

103-571- Fits 3/16” Panels 103-635- Fits 1/4” Panels 103-637- Fits 3/8” Panels 103-4175- Fits 1/2” Panels

P4440-CL Fits 1/4” PanelsP4506-CL Fits 3/16” Panels108-640- Fits 1/8” Panels

PVCBlack, White & Clear

PVCBlack, White & Clear

108-641- Fits 3/16”-1/4” Panels

PVC - ClearClear with White Web

PVC - ClearClear with White Web

103-631- For 1/2” Panel 103-630- For 5/8” Panel 103-632- For 3/4” Panel

USE S055 SLOTTER USE S1/S7 SLOTTER USE S1/S7 SLOTTER

Polypropylene12 Ft. Lengths

Black, White & Brown


Black, White & BrownPolypropylene12 Ft. Lengths










103-639-

9888H 696H

.035/.045 Thick - Polypropylene100 & 500 Ft. Coils


103-638-P4169-CL

.086 Thick - PVC100 Ft. Coils - Clear with White Web

.062/.070 Thick - Polypropylene100 & 500 Ft. Coils




103-634- Fits 1/8” Panels

CLEAR ACRYLIC/PVC5 Ft. Lengths

CLEAR P.E.T.G./PVC with glue groove

5 Ft. Lengths

PLASTIC TEE HINGE

FLAT HINGE

PLASTIC PANEL HINGE

F-308

4”

.4”

10.4”90°

3.60”

.4”

10.2”

3.2”

.4”

10”

8mm

15mm

InstallatIonDoor Weight

2 -3 kg(5 - 7 lb)

3.5 - 4.5 kg(8 - 10 lb)

5 -6 kg(11 - 13 lb)

Door Height Force Force Force254 - 305 mm(10 - 12 in)

100 N(22.5 lb)

100 N(22.5 lb)

100 N(22.5 lb)

330 - 380 mm(13 - 15 in)

100 N(22.5 lb)

100 N(22.5 lb)

150 N(33.7 lb)

406 - 457 mm(16 - 18 in)

100 N(22.5 lb)

100 N(22.5 lb)

150 N(33.7 lb)

483 - 533 mm(19 - 21 in)

100 N(22.5 lb)

150 N(33.7 lb)

559 - 610 mm(22 - 24 in)

100 N(22.5 lb)

150 N(33.7 lb)

Gas Springs Selection Guide

PRODUCT FEATURES:This multipurpose stay can be used on “Drop Down” and “Lift up Doors”.• This stay will open as wide as 100°, depending on the adjustment this stay “brakes” the door as it holds in intermediate positions.• Adjustments can be made using a 4mm allen key.• 1 piece recommended for doors under 8 lbs. and 2 pieces for doors ranging from 8 lbs. to 16 lbs.• Non-handed.• Chrome plated, all metal construction.

Can be used for either frameless or framed cabinet applications. Opening angle can be adjusted from 45°-90°

4.24”

1.28”

.48”6.4”

1.28”.4”

1.28”

.48”

PRODUCT FEATURES:• Suitable for face frame and frameless applications.• Suitable for wood and aluminum doors.• No lubrication required, (notE: If lubricated, product will not operate properly).• Set includes: 2 gas springs, 2 sets of mounting brackets and screws.• Finish: Silver, all metal construction.

10.8”3.6” 4.8”

.24” .6”

2.04”1.20”

.4”.24”

.08”

1”.3”1.28”

1.86”

PaRt #ssH-2007

PaRt # DEsCRIPtIon

6552-EtH-10 Euro HingeFalse Front Hinge

PaRt # FoRCElFtUP-100sV 100n (22.5 lbs)lFtUP-150sV 150n (33.7 lbs)

OPI ECONOMY SERIES:SOFT STAYUP HINGE

CHROME PLATEDEURO HINGES

OPI ECONOMY SERIES: “LIFT - UP” GAS SPRING

F-309

PRODUCT FEATURES:• Positive stop to keep flap open• Left or right hand installation• 304 stainless steel/satin finish• 33 lbs. load each• Screws not included• Must install parallel to sidewall

gREAT FOR OFFICES

PRODUCT FEATURES:• 11 lb. capacity• Doors will not slam shut• Adjustable closing speed• Successfully passed 30,000 open/close cycles• Material: Steel, Zinc Diecast and Plastic• Screws included

For over the top Flipper doors

KEEPS FlAP/lIDS FROm SlAmmIng ShUT & FlyIng OPEnPRODUCT FEATURES:• Upward opening flap• Closing speed adjusts with the turn of a screw• Oblong holes of the mounting plate allow flap opening angle adjustable from 80° to 100°• Right and left hand mounting• For Piano/Butt/Concealed Hinges• Supplied with screws• Material: Zinc Alloy, Steel• Finish: Bright Nickel

torque Calculation: torque = door height x 1/2 x door WeightPer Piece: 20 - 70 kg • cm (19 - 60 lbs • inch)Per Pair: 40 - 140 kg • cm (38 - 120 lbs • inch)

Max 75° opening Max 90° opening

Conversion Formula: mm ÷ 25.40 = inchExample: 32mm ÷ 25.40 = 1.25 inches

Conversion Formula: mm ÷ 25.40 = inchExample: 32mm ÷ 25.40 = 1.25 inches

pArt #slide

leNGthtrAvel leNGth

ovl-14 355.6 mm 249.2 mmovl-15 381 mm 274.6 mm

pArt # tYpeNsdX-35l Left HandNsdX-35r Right Hand

pArt #ls-195

pArt #ls-270

ADJUSTABLE SOFT DOWN STAY

LID STAY

SOFT CLOSING MECHANISMS

F-310

Dimensions in millimeters

20 (B

oard

thi

ckne

ss)

requires Hinge

PRODUCT FEATURES:• Unique mechanism will help

lift doors and hold at the open position.

• Sleek & Compact design.• Easy installation• Adjustable mounting plate• Patented LAPCON technology

provides smooth and quite motion.

• Successfully passed 30,000 open/close private cycle tests.

PRODUCT FEATURES:• SOFT CLOSE• Constructed of nickel plated steel with light gray plastic

housing.• No tracks or guides required.• Handle positions at the bottom of the door.• Patented LAPCON technology provides smooth and

quiet motion.• Can be set for a 90˚ or 105˚ opening.• Smaller mechanism does not intrude into cabinet space.• Sold in pairs with all hardware included for one door.• Requires piano hinge or concealed hinge.• Can be used with aluminum or wood doors.

135 2632.5

95

38

18

425

(Doo

r tra

vel l

engt

h)35

2.5

35

Doo

r

3

34 3174

.3

32

Top board

Dimensions in millimeters

PART #DOOR WIDTH

DOOR HEIGHT DOOR WEIGHT (kg)

SLUN-3 600-900mm(23-5/8” to35-7/16”)

390-450mm(15-23/64 to17-23/32”)

2.5 - 3.5 (5.5 - 7.7 lbs.)SLUN-4 3.6 - 4.5 (7.9 - 9.9 lbs.)SLUN-5 4.6 - 5.2 (10.1 - 11.4 lbs.)

PART # DOOR WIDTH DOOR HEIGHT DOOR WEIGHT HBFN-2M

17-23/32” to 35-7/16” 12-19/32” - 14-9/16”5.5 - 7.7 lbs

HBFN-3M 7.9 - 9.9 lbsHBFN-4M 9.9 - 12.1 lbs

VERTICAL SWING UP MECHANISM

HORIZONTAL BIFOLDING DOOR MECHANISM

F-311

Black

White

62(2.441”)

38(1.496”)

22(.866”)

(1.13”)28.28

20(.797”)

20(.797”)

101(3.937”) 62

(2.441”)31.5

(1.240”)

10.5(.413”)

9 (.354”)

(.768”)19.5

65(2.559”)

(1.260”)32 4

(.157”)

(.472”)12

Mounting Plate SDS-A

S=Overlay Coverage in case of drop hingeHINGE TYPE A B C D

Single Knuckle Hinge 60 (2.362”) 73(2.874”) - -Drop Hinge - - 49+S (1.929”) 62+S(2.441”)

Product Features• For DOWNWARD-OPENING FLAP DOOR with piano, butt or drop hinges, (SOLD SEPARATELY) • Designed for small height door application• SDS-C100TV has a catch to hold the lid closed in position• SDS-100TV does not have a catch feature• Designed to be used with magnetic catch or touch latch• Torque Calculation: Torque = Door Height x 1/2 door Weight

PART # COLOR TYPE * TORQUE PER PIECE * TORQUE PER PAIRSDS-100W-TV White W/O Catch 5-12kgf•cm (4.3-10.4 lbs•in) 10-24kgf•cm (8.7-20.1 lbs•in)SDS-100B-TV Black

SDS-C100W-TV White With Catch 5-12kgf•cm (4.3-10.4 lbs•in) 10-24kgf•cm (8.7-20.1 lbs•in)SDS-C100B-TV BlackSDS-100W-TVZ White W/O Catch 16.5-37.6kgf•cm (14.3-32.6 lbs•in) 33-75.2kgf•cm (28.6-65.2 lbs•in)SDS-100B-TVZ Black

SDS-C100W-TVZ White With Catch 16.5-37.6kgf•cm (14.3-32.6 lbs•in) 33-75.2kgf•cm( 28.6-65.2 lbs•in)SDS-C100B-TVZ Black* Torque measurement is referring to kilograms of force per centimeter (kgf•cm) or pounds of force per inch (lbs•in).

(SHORT ARM)

SDS-100-TV/TVZ

SOFT DOWN STAY

F-312

SLS-ELAN

(1.102”)26

8 (.315”)

19mm (.748”) overlay use shown(Left-hand side mounting)

(7.283”)185

47(1.850”)

270

(10.

630”

)

(1.260”)32

(6.614”)168

(6.300”)160

25 (.984”) 27 (1

.063

”)59

(2.3

23”)

70 (2

.756

”)

DOOR WEIGHT RANGE TABLE (LBS.)DOOR

HEIGHT(inches)

SINGLE USE PAIR USEM-TYPE H-TYPE M-TYPE H-TYPE

MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX.12” 8.0 10.8 10.8 14.5 16.0 21.7 21.7 29.013” 7.4 10.0 10.0 13.4 14.8 20.0 20.0 26.814” 6.9 9.3 9.3 12.4 13.7 18.6 18.6 24.915” 6.4 8.7 8.7 11.6 12.8 17.3 17.3 23.216” 6.0 8.1 8.1 10.9 12.0 16.3 16.3 21.817” 5.6 7.6 7.6 10.2 11.3 15.3 15.3 20.518” 5.3 7.2 7.2 9.7 10.7 14.4 14.4 19.319” 5.1 6.8 6.8 9.2 10.1 13.7 13.7 18.320” 4.8 6.5 6.5 8.7 9.6 13.0 13.0 17.421” 4.6 6.2 6.2 8.3 9.1 12.4 12.4 16.622” 4.4 5.9 5.9 7.9 8.7 11.8 11.8 15.823” 4.2 5.7 5.7 7.6 8.3 11.3 11.3 15.124” 4.0 5.4 5.4 7.3 8.0 10.8 10.8 14.525” 3.8 5.2 5.2 7.0 7.7 10.4 10.4 13.926” 3.7 5.0 5.0 6.7 7.4 10.0 10.0 13.427” 3.6 4.8 4.8 6.4 7.1 9.6 9.6 12.928” 3.4 4.6 4.6 6.2 6.9 9.3 9.3 12.4

Single or Pair use depending on door size

• LAPCON stay for upward-opening flap doors.• Lift-assist mechanism for extra light-opening.• Damper equipped for soft & silent closing at the end.• Slim design and installed location maximizes space inside of cabinet.• Simple installation by aligning body to edge of cabinet.• Single or Pair use allows wide range of door size/weight.• Recognized by LGA for 40,000 cycles.• Optional bracket for aluminum frame door available, please inquire.

Product Features

PART # TYPETORQUE

PER PIECE MATERIALFINISH/COLOR

SLS-ELAN-MR (Right) M-Type (Medium Duty)

55-75 kg-cm(48-65 lbs•in) • Aluminum

• Steel • ABS

• Anodized• Galvanized• Light Gray

SLS-ELAN-ML (Left)SLS-ELAN-HR (Right) H-Type

(Heavy Duty)75-100 kg-cm(65-87 lbs•in)SLS-ELAN-HL (Left)

SOFT CLOSING LID STAY

F-313

• Lateral swing mechanism.• Ideal for tight front space application.• Allows doors to swing out laterally in a small radius.• Doors will not get in the way when fully opened thus providing full access to the cabinet.• Door has free swing & soft close.• Easy installation. Designed for standard 32mm system mounting, with snap-on hinge.• 4-way adjustment.• Can be used in single or double door configuration.• Ideal for cabinets and hiding flat screen t.v.’s.• Use with frameless cabinets.

Product Features

PARTS INCLUDED:

• Hinge Body: 2 pcs. •Connecting Bar: 1 pcs.• Mounting Plates: 2 pcs. •Cover Cap: 2 pcs.

LIN-X-SET

EACH BASIC KIT DOES 1 DOOR

Hinge Body(Closed)

Hinge Body(Open)

CLOSE-UP:

LIN-X450 LIN-X600Door (Max. 7kg)

(15.4 lbs.)

264(10-25/64”)

Door

Hei

ght 6

00-9

00(2

3-5/

8”-3

5-7/

16”)

Door Width 400-500(15.748-19.685”)

70(2

.756

”)

236

(9.2

91”)

Door

Thi

ckne

ss15

-24

(.591

-.945

”)

68(2

.677

”)

Max

. 490

(19.

291”

)54

6(2

1-1/

2”)

Door (Max. 9kg)(19.8 lbs.)

264(10-25/64”)

Door

Hei

ght 6

00-9

00(2

3-5/

8”-3

5-7/

16”)

Door Width 550-650(21.656-25.594”)

70(2

.756

”)

236

(9.2

91”)

Door

Thi

ckne

ss15

-24

(.591

-.945

”)

68(2

.677

”)

Max

. 490

(19.

291”

)54

6(2

1-1/

2”)

ANODIZED NICKEL FINISH ~ STEEL / ALUMINUM MATERIAL

NOTE: When working with taller/heavier doors,

please inquire!!! Many options available!

CLOSED

OPENED

Optional bracket to use LIN-X450 & LIN-X600 with face frame cabinets.

FACE FRAMECABINET OPTIONS

Bracket- Sold Separately

FFCB-HG-1

PART #DOOR WIDTH

DOOR HEIGHT

DOOR THICKNESS

DOOR WEIGHT

LIN-X450 400-500mm15-3/4” - 19-11/16”

600-900mm23-5/8” - 35-7/16”

15-24mm19/32” - 61/64”

max 7kg15.4 lbs./door

LIN-X600 550-650mm21-21/32” - 25-19/32”

600-900mm23-5/8” - 35-7/16”

15-24mm19/32” - 61/64”

max 9kg19.8 lbs./door

LATERAL OPENING DOOR HINGE

F-314

• Strong magnet holds door in the open position. • 17.6 lbs. of magnetic force per assembly. • Can be mounted on either the floor or the wall. • Optional anchor bolt available for installing on concrete surfaces. • Available in ivory or brown.

Product Features

• 304 Stainless steel body with aluminum cylinder and steel pin/shaft. • Bracket arm catches the roller for self closing at approximately 10º. • Silent operation, the hydraulic cylinder absorbs shock, preventing the door from slamming shut. • Easy installation, ideal for retro-fit. • Works with a maximum door width of 43-5/16”. • Maximum door weight of 176 lbs.

Product Features

PART #SMDH/IVY

SMDH/BRNANCHOR-SMDH*

*Optional

JFR-021205

DOOR STOPPER

STAINLESS STEEL HYDRAULIC DOOR CLOSER

F-315

Product Features

• No more lids that slam shut! This hinge has a built-in soft close dampening mechanism.• Mortise mounting.• Sold in pairs, handed.• Choice of Black or White cover.• Ideal for small to large lids.• Calculate torque required to determine which hinge will work best for your application.• Torque Calculation: Torque = Door Height x 1/2 x Door Weight.• For upward opening applications only.

No. PART NAME MATERIAL FINISH / COLOR1 Bracket Polyacetal Black2 Mounting Plate Aluminum Black3 Face Plate ABS Black / White4 Damper 304 Stainless Steel Plain

.118”.157”

1 4

3 2

2.126”

1.97

”

HG-JHM162.60”

2.12

6”

HG-JHM20

DampingDirection

Black Cover White Cover

Bracket / Mounting Plate

HG-JHM16 HG-JHM20

PART # COLOR DESCRIPTION*TORQUE PER PAIR

HG-JHM16-34 Black Body 17.4 - 29.5 lbs•inHG-JHM16-50 29.5 - 43.4 lbs•inHG-JHM16-BL Black Face Plate -HG-JHM16-WT WhiteHG-JHM20-80 Black Body 53 - 70.8 lbs•inHG-JHM20-BL Black Cover -HG-JHM20-WH White* Torque measurement is referring to pounds of force per inch (lbs•in)

HG-JHM16/20SOFT CLOSING DAMPENING HINGE

F-316

K101-4079-

UPPER TRACK For:K101-606, K101-610,K101-601

STYRENEK101-606-

LOWER DOUBLE FLAT TRACKFor 5/8” Doors

K101-610-

LOWER DOUBLE FLAT TRACKFor 3/4” Doors K101-601-

LOWER SINGLEFLAT TRACK

BROWN, WHITE,BLACK, ALMOND

Nylon Glides Are Recessed Into The DoorR26-62BE 1/4” x 1/4” x 1” For Use with:

K101-606K101-610K101-601

180- For 1/8” Doors 140- For 1/4” Doors 120- For 1/2” Doors 340- For 3/4” Doors

*5/32”gap

*5/16”gap

*9/16”gap

*13/16”gap

StyreneWhite - Black - Brown

12 Ft. Lengths

StyreneWhite - Black - BrownAlso Available in Beige

12 Ft. Lengths


12 Ft. Lengths


12 Ft. Lengths

R101-603-BRFor 3/16”-1/4” glass/panelAnti-Rattle Feather Track

Polypropylene- Brown12 Ft. Lengths

NOTE: ALL TRACK CAN BE MADE AVAILABLE WITH PRESSURE SENSITIVE TAPE. PLEASE INQUIRE.

Mounts onto 1/4” mortise on the bottom of each door with a brad nail.

K101-4079

R26-62

K101-610

100/500’ coils

NYLON NON-LOCKING GLIDES

- OUR MOST POPULAR ASSEMBLY-Complete Set Consists Of:

1 x 12 Ft. Length Upper Track1 x 12 Ft. Length Shoe

1 x 12 Ft. Length Lower Track1 Wheel Per Running Ft.

• Lower track has sidewalls to prevent rollers from slipping off track• 1” (25.4mm) shoe allows superior gripping of glass or plywood doors.• Deep upper track to allow extra clearance and easy installation.• Zinc plated rollers with plastic wheel.• Track & shoe material is rigid PVC.

SLIDING DOOR TRACK SYSTEM WITH WHEELS12 FT. LENGTHS - AVAILABLE IN SILVER GRAY

MT39-SG For 1/4” Doors

No Glides or Wheels Needed – For Light Weight Doors

SLIDING DOOR TRACK SYSTEM WITH WHEELS12 FT. LENGTHS - AVAILABLE IN SILVER GRAY & BLACK

HIGH QUALITY EASY-ROLL METAL BALL BEARINGS WITH ECONOMY OF PLASTIC TRACK.CASE PRICES

Complete - 2 Tracks,1 Dual Wheel Per Running Ft.

MT38- For 1/4” Doors

NOTE: Rough Opening

Less 7/8” = Door Size

POLYPROPYLENE - WHITE & BROWN

- 12 FOOT LENGTHS

For additional wheels, order

Part #MTR2

For additional wheels, order

Part #MTR

PLASTIC SLIDING DOOR TRACK

PLASTIC MIRACLE TRACK

PLASTIC MIRACLE TRACK II

F-317

FINISH CHARTM Mill As extruded - may or may not have “scratches”/die lines. Dull Finish.

ALUT18-M For 1/8” Doors




ALU7474-M

ALUT134SP-M For 3/4” Doors

ALUSH2-12 For Up to 1/4”Doors

Galvinized Steel

ALURC4-12Galvinized Steel

Wheels every 4-1/2”.Use 2/3 of the track with wheels.Example:6 ft. opening use 4 ft. of roller system.

12 FOOT LENGTHS

SELF SUPPORTING PILE IS ALWAYS ON CENTER AND HAS THE INTEGRITY AND CONSISTENCY

TO ENSURE A TIGHT SEAL.

MANY APPLICATIONS:Windows

DoorsShowcases

50'Minimum Coil

No Glides or Wheels Needed

PART# DESCRIPTION COLORDS-150-GY .270 W x .150 H GrayDS-200-GY .270 W x .200 H Gray

ALUMINUM SLIDING DOOR TRACK

ULTRA PILE DUST SEAL/WEATHER SEAL w/ADHESIVE

F-318

Product Features:•Ballbearinghighqualityrollersforasilent&smoothglide.•Stoppersareinstalledinsidethetrack.•Onetrackworkswithbothglass&woodcarrierkits.•Aluminumtrackavailableintwolengths.•Worksasbothupper&lowertrack.•Glasscarrierworkswith5/32-1/4”thickdoorsupto33lbs. Note: Must bore holes in glass for installation before tempering•Woodcarrierworkswith5/8”thickdoorsupto33lbs.

carrIer INstaLLatIoN GuIde INstaLLatIoN

AL1535GLASS&WOOD:Idealforbypassglassorwooddoorsinfurnitureapplications.

SLIDINGDOORSYSTEMFORFURNITURE

carrIer INstaLLatIoN GuIde INstaLLatIoN

For Glass

For Wood

ALUMINUMTRACK(ClearAnodizedFinish)AL1535-TRK66.5 Ft. Lengths

AL1535-TRK1010 Ft. Nominal Lengths

GLASSDOORCARRIERKITFOR2DOORSEach Kit Includes: 4 carriers, 4 top guides w/clip device, 8 finishing caps, 4 stoppers w/retention device & screws.

AL1535-GKIT

WOODDOORCARRIERKITFOR2DOORSEach Kit Includes: 4 carriers, 4 top guides w/clip device,, 4 stoppers w/retention device & screws.

AL1535-WKIT

SLIDING DOOR FITTINGS

F-319

D25:Idealforbypasswooddoorsinfurnitureapplications.

SLIDINGDOORSYSTEMFORFURNITURE

Product Features:•Easytoinstall&regulate.

•PVCtrackavailablein6colorstomatchanyapplication.

•Worksasbothupper&lowertrack.

•Workswith5/8”thickdoorsupto33lbs.

carrIer INstaLLatIoN GuIde INstaLLatIoN tracK INstaLLatIoN

Silver(SL),Brown(BR),Caramel(CA),Beige(BE),White(WH)&Black(BK)

PVCTRACK(finishesbelow)D25-TRK10-10 Ft. Nominal Lengths

WOODKIT

A

choice of Matching colors:

Each Kit Includes: 4 carriers, 4 stoppers, 4 upper guides & screws.

D25-KIT

SLIDING DOOR FITTINGS

F-320

Product Features:•Ballbearinghighqualityrollersforasilentandsmoothglide.

•Stopperswithretentiondeviceinstalledinsidethetrackwillstopandretainthedoorinposition.

TOPSLIDINGDOORTRACKFORWOODDOORS

IdealforIn-lineorbypassdoors,whentworunsof

trackareused.

For 3/4” or tHIcKer Wood doors uP to 100 LB. Load caPacItY

CARRIER TRACK

> 2-1/2”

1-23/32”

1/2"

3/4"

3/16"

5/8"

3/8"

TRACK INSTALLATION

GUIDE INSTALLATION

CARRIER INSTALLATION

D & E

1 set required per doorDN50-WKIT

2 Rollers

2 Stoppers with retention device

1 Floor guide GP-12

2 Mounting plates

Screws

A

B

C

D

E

MAX DOORWEIGHT

110 50 KG

LBS

DOORTHICKNESS

> 18 mm> 3/4”

E

INLAY SYSTEM BYPASS IN LINE/

1

MAX DOORHEIGHT

NONENONE

MAX DOORWIDTH

DOOR / TRACKGAP

>13 mm> 1/2”

>3 mm>1/8”

N.A.

MIN DOORFRAME HEIGHT

WOOD

DOOR FRAMEMATERIAL

ANSI-BHMA *

GRADE 1

SYSTEM 32

NO

ROLLER

BEARINGPREMIUM

BALL

DN50

ALUMINUMTRACK(ClearAnodizedFinish)DN50-TRK66.5 ft. Lengths

DN50-TRK1010 ft. Nominal Lengths

WOODDOORCARRIERKIT

DN50-WKIT

SLIDING DOOR FITTINGSNEW!

F-321

TRACK INSTALLATION

GUIDE INSTALLATION

CARRIER INSTALLATION

> 3-3/16”

1-3/8”

1-9/16”

3/8”

5/8”

D & E

TOPSLIDINGDOORTRACKFORWOODDOORSDN80

IdealforIn-lineorbypassdoors,whentworunsof

trackareused.

For 13/16” or tHIcKer Wood doors uP to 176 LB. Load caPacItY


2 Rollers


1 Floor guide GP-12

2 Mounting plates

Screws

A

B

C

D

E

MAX DOORWEIGHT

110 50 KG

LBS

DOORTHICKNESS

> 18 mm> 3/4”

E


1

MAX DOORHEIGHT

NONENONE

MAX DOORWIDTH

DOOR / TRACKGAP

>13 mm> 1/2”

>3 mm>1/8”

N.A.


WOOD

DOOR FRAMEMATERIAL

ANSI-BHMA *

GRADE 1

SYSTEM 32

NO

ROLLER

BEARINGPREMIUM

BALL


2 Rollers


1 Floor guide GP-12

2 Mounting plates

Screws

A

B

C

D

E

MAX DOORWEIGHT

176 80 KG

LBS

DOORTHICKNESS

> 20 mm> 13/16”

E


1

MAX DOORHEIGHT

NONENONE

MAX DOORWIDTH

DOOR / TRACKGAP

>16.5 mm> 21/32”

>5 mm>13/64”

N.A.


WOOD

DOOR FRAMEMATERIAL

ANSI-BHMA *

GRADE 1

SYSTEM 32

NO

ROLLER

BEARINGPREMIUM

BALL

CARRIER TRACK

Product Features:•Ballbearinghighqualityrollersforasilentandsmoothglide.

•Stopperswithretentiondeviceinstalledinsidethetrackwillstopandretainthedoorinposition.

ALUMINUMTRACK(ClearAnodizedFinish)DN80-TRK66.5 ft. Lengths

WOODDOORCARRIERKIT

DN80-WKIT

SLIDING DOOR FITTINGSNEW!

F-322

FINISH CHARTM Mill As extruded - may or may not have

“scratches”/die lines. Dull Finish. A medium duty commercial and residential grade sliding door hard-ware series ideal for single and bi-parting installations. Applications include doors between rooms, closet doors, cabinets, storage walls, and partitions.• Grant Sliding door hardware.• For doors 3/4” and up weighing up to 150 lbs (68 kg).• Precision ball-bearing wheels guarantee a smooth, quiet and

long lasting performance.• Heavy duty aluminum l-beam track; jump proof design.• Pivoting rocker arms ensure track-carrier contact.• Bail and socket suspension compensates for minor header

misalignment.• Lock nut guarantees permanent positioning.• Vertical adjustment + 3/8” (9.5 mm).• Conforms to ANSI/BHMA standards, Grade 1.• Made in USA.

12 FooT LeNgTHS 150 LbS.

A heavy duty commercial and residential grade sliding door hardware series ideal for design applications which require the movement of heavy panels, space dividers or large doors.• Grant sliding door hardware.• For doors 1” and up weighing up to 325 lbs/door (147 kg/door).• Precision ball-bearing wheels guarantee a smooth, quiet and

effortless operation.• Four wheel carrier, center hung for efficient operation.• Vertical adjustment + 1/4” (6.4 mm).• Heavy duty aluminum l-beam track; jump proof design.• Conforms to ANSI/BHMA standards, Grade 1.• Made in USA.For by-passing doors mount parallel tracksFor bi-parting doors use an additional set of hardware

12 FooT LeNgTHS 325 LbS.

Holes spaced every 6”

staggered

Holes spaced every 6”

staggered

6”

6”

PART #ALU561-M

PART #561-R

PART #ALU562-M

PART #562-R

ALUMINUM SINGLE UPPER TRACK WITH HOLES

F-323

FoR 3/4” oR 1-3/8” THICK DooRS (Weighing up to 50 lbs. each)

CoNTeNTS:1 length of steel track

2 pairs of nylon wheel hangers with installation screws1 nylon adjustable floor guide

2 brass finger pulls

PLASTIC FINgeR PULLS with high quality pressure sensitive adhesive backing. No holes to drill. Peel off protective backing paper and apply directly to surface of glass.

170-WH (WHITE)170-bK (BLACK)170-CL (CLEAR)

• Simple adjustment with a screw driver• Nylon adjustable non-routing floor guides• Nylon wheel hangers for smooth,

quiet operation• Shrink packed with all necessary hardware• Installation instructions included

gLASS FINgeR PULLS• 3/4” x 2-3/4” thick with peel

and stick adhesive backing.

PART # FINISH171-Cg Clear Glass171-Mg Mirror Glass

PART #TRACK

LeNgTHDooR SIZe

SDT-400 4 ft. 24”SDT-500 5 ft. 30”SDT-600 6 ft. 36”SDT-800 8 ft. 48”

BY-PASS CLOSET DOOR TRACK SET

slides, hinges, pneumatic lifts

Documents

slides euro slides

glass door hinge

flap door hinge

institutional hinge

specialty euro hinge

hinges acrylic hinge

panel hinge plastic

lateral opened door