Sleep Over Sack

by

©2014 Riley Blake Designs and RBD Designers.

Supplies Needed2 5/8 yards quilted fabric1 yard accent fabric1/4 yard fusible webbing (Heat N Bond Lite)1 yard – 1 1/2” nylon webbing

Cutting instructions1. Quilted Fabric Cut into 2 pieces: 40” x 50” (back) and 40” x 40” (front).2. Accent Fabric a. Straps: Cut 1 – 3 1/2” strip. b. Monogram Letter: Cut 1 – 10” x 10” square. c. Binding: Cut 2 1/4” bias strips to equal 230”.

Sewing Instructions1. Monogram Letter Draw letter on smooth side of fusible web. Press fusible web onto wrong side of letter fabric. Cut on marked line. Follow diagram for letter placement. Press onto front. Stitch around letter with straight, satin or other stitch.2. Straps With right sides together (RST), stitch down length of 3 1/2” strip. Turn tube right side out. Press. Insert 1 1/2” nylon webbing through tube. Stitch 1/4” down both sides of strap. Cut into 2 – 18” pieces. Fold each strap over 1/2” and pin in place – see diagram for placement. *Note:Thestrapswillnotbepinneddownflat,theywillbe loose to allow arms to enter. Stitch across each strap end at 1/8” and 1/4”.3. Front Stitch binding pieces together. Press in half lengthwise. Stitch binding to top of front piece. Fold over to opposite side and top-stitch or hand-stitch in place.4. Construction a. Place front and back together with wrong sides together, matching up the bottom corners. b. Pin into place. c. Baste together. d. Stitch binding all the way around sack. e. Fold over to opposite side and top-stitch or hand- stitch in place.5. Folding a. With front side down, fold sack into thirds lengthwise. b. Fold top half back over bottom half. c. Tuck top into the pocket on the front.

Sleep Over Sack

Sleep Over Sack Diagram

13”

11”

15”

7”

Front Piece

Back Piece