skyleader gps pigeon identification tracker ring ... · step 4 install the battery into the gps...

15
1 SKYLEADER GPS Pigeon Identification Tracker Ring Instruction Manual 2016/07/21

Upload: nguyennguyet

Post on 01-Dec-2018

225 views

Category:

Documents


1 download

TRANSCRIPT

1

SKYLEADER GPS Pigeon Identification

Tracker Ring Instruction Manual

2016/07/21

2

Content

Driver and Installation ---------P.3~P.10

Tracks Reading -------------P.10~P.13

Departure Time Setup -----P.14~P.15

3

Driver and Installation

Step 1 Insert the USB disk into the USB port of your computer.

(See Picture 1)

Step 2 Double click the "My Computer" icon on the desktop to open file

manager. (See Picture 2)

Step 3 Double click the "Removable Disk" icon to browse the USB disk.

(See Picture 3)

Picture 1

Picture 2

Picture 3

4

Step 4 There should be six files in the USB Disk. First, double click the

"C++ Driver" folder to open it. (See Picture 4)

Step 5 Double click the "vcredist_x86.exe" icon to start installation.

(See Picture 5)

Picture 4

Picture 5

5

Step 6 Check "I agree to the license term and conditions", then click

[Install] button continue. (See Picture 6)

Step 7 Waite for the installation to complete.

Step 8 Click [Close] button to complete the installation.

Picture 6

Picture 7

Picture 8

6

Step 9 Install "GoogleEarthWin.exe" (See Picture 9)

Step 10 Waite for the installation to complete.

Step 11 Connect the reader and USB cable to your computer.

Picture 9

Picture 10

Picture 11

7

Step 12 Install PL2303_Prolific_DriverInstaller_v1.12.0 to your

computer.

Step 13 Click the [Next] button. (See Picture 13)

Picture 12

Picture 13

8

Step 14 Click the [Finish] button to complete the installation.

Step 15 Copy the folder "gps_client."

Picture 14

Picture 15

9

Step 16 Minimize the window.

Step 17 Paste the folder "gps_client" on the desktop.

Picture 16

Picture 17

10

Step 18 After the pasting process is completed, double click the "gps _

clinet" folder to open it.

Track Reading

Step 1 Connect the ring reader and USB cable to your computer.

Step 2 Open the "gps_client" folder and double click the "gps_client.exe"

icon to run the software.

Picture 18

Picture 1

11

* Flight path data files will be saved in the "db" folder.

Step 3 Select COM3 as the com port and click on connect. If connection

is successfully established, progress indicator on the right bottom of the

screen flashes and the two LEDs on the ring reader light up.

Picture 2

Picture 3

12

Step 4 Install the battery into the GPS tracking ring. (See Picture 4)

Reinstall the battery will reset the ring.

Step 5 Insert the GPS ring into the ring reader and make sure the blue

light is on. If the blue light does not light up, return to step 4 or change

the battery then try again.

Picture 4

Picture 5

13

Step 6 Specify a filename for the GPS data to be saved, as the shown

below with blue square. Then click on Track Reading icon to read the

GPS data from the ring.

Step 7 Once the file opens successfully, you can see the track from

Google earth and Google Map/open street Map.

Picture 6

Picture 7

14

Set Departure Time

Step 1 Go through Track Reading step 1 to step 5.

Step 2 Check the "Delete track history after track reading" option then

click [Track Reading] button to delete the GPS track data in the ring.

Step 3 If you want to reconfirm the operation, click the [Track Reading]

button again.

Picture 1

Picture 2

15

Step 4 Pick a date from the calendar and enter the departure time. Then

click on [Time Setting] button. (See Picture 3)

Step 5 After departure time is set into the ring, you can see

[Time Setting Successful] message marked with blue square and

[Set leave time successfully] marked with green square as shown below.

Picture 3

Picture 4