skiold damas hambo · 2020-04-08 · skiold group enmar el 4 ww.skiold.com [email protected] damas...
TRANSCRIPT
SKIOLDGROUP
SKIOLD DAMAS HAMBO
SKIOLD DAMAS HAMBO SCARIFIER
The Hambo is a solid construction, consisting of a frame and a housing of steel, a tripartite rotor with exchangeable beaters, an exchangeable scarifying basket, a driving mechanism with geared motor, and an outlet hopper of steel.
SKIOLDDAMAS
SKIOLD MAKES THE DIFFERENCE!
SKIOLDGROUP · Denmark · Tel: +45 99 89 88 87 · www.skiold.com · [email protected]
Damas A/S | Industrivej 2, V. Aaby | DK-5600 Faaborg | Tel +45 63 61 82 00 | Fax +45 62 61 68 51
[email protected] | www.damas.com
H A M B O
Scarifier
The Hambo is a solid construction, consisting of a frameand a housing of steel, a tripartite rotor with exchangeablebeaters, an exchangeable scarifying basket, a driving mech-anism with geared motor, and an outlet hopper of steel.
Inspection and exchange of the basket and the beaters areeffected through large doors in both sides. The beaters canbe replaced by brushes in a special brush holder.
Function
The material to be treated (1) is led into the scarifying basket(4) by means of the feed worm (2). Grass or clover seeds areseparated from the seed coats (the capsules or the flowers),double seeds are divided and dehulling is done by means ofthe rotor (3). The material is then led to an outlet hole in theopposite end or through the clipper-de-awner wire mesh tothe outlet hopper (6). The outlet hole (5) is provided with aweighted flap.
Specifications D-600 D-800
Guiding capacity, normal rye grass t/h 0.6 0.8
Scarifying basket mm Ø600 × 1245 Ø800 × 1245
Motor kW 7.5 7.5
Width mm 930 1130
Length mm 1920 2020
Height mm 1450 1650
Weight kg 690 750
Solid construction
The Hambo is a solid construction, consisting of a frame and a housing of steel, a tripartite rotor with exchangeable beaters, an exchangeable scarifying basket, a driving mechanism with geared motor and an outlet hopper of steel.
Basket and beaters can be inspected and accessed through large doors in both sides of the machine. The beaters can be replaced by brushes in a special brush holder.
How it works
The material to be treated (1) is led into the scarifying basket (4) by means of the feed worm (2). Grass or clover seeds are separated from the seed coats (the capsules or the flowers), double seeds are divided and dehulling is done by means of the rotor (3). The material is then led to an outlet hole in the opposite end or through the clipper-de-awner wire mesh to the outlet hopper (6). The outlet hole (5) is provided with a weighted flap.
Hambo scarifierSturdy and efficient construction built to last
SKIOLD DAMAS DK-5250 Odense SV • Tel.: +45 99 89 88 87 • Email: [email protected] • www.skiold.com/seed
SKIO
LD A
/S •
CVR
: DK
57 0
8 11
12 S
æby
• Al
l Rig
hts
Rese
rved
.