Skills: Test and measurement: Signal generators, oscilloscopes, spectrum analyzers, LabVIEWHardware description languages: VHDL, VerilogField programmable gate arrays: Altera Stratix, Xilinx Spartan-3Assembly languages: Motorola 6812, TI TMS320C6000 VLIW DSPHigh-Level Languages: C, C++, PerlSoftware development environments: Metrowerks Code Warrior, TI Code ComposerAlgorithm development environments: LabVIEW, MATLABDesign automation tools: Quartus, Modelsim, PSpice, MultisimVerification Tools: Incisive Formal Verifier, Synopsys VCSStandards implemented: v.22bis modem

Education: The University of Texas at Austin Austin, TXDepartment of Electrical and Computer EngineeringBachelor of Science Degree expected May 2007 GPA: 4.0/4.0Undergraduate Research Advisor Dr. Brian L. EvansCourse Work: Communication Systems, Wireless Communication Laboratory, Embedded and Real-Time Systems, Real-Time Digital Signal Processing, Digital Signal Processing, Computer Architecture, Digital System DesignUsing VHDL, Digital Logic Design, Linear Systems and Signals, Probability and Random Processes,Introduction to Microcontrollers, Solid State Electronics, Circuit Theory, Electronic Circuits

Optimisation Engineer - Huawei, Nortel 2G,3G,4G

An exciting opportunity has arisen for an Optimisation Network Engineer to join a market-leading telecoms company based in Brussels.

The language used in the team is English/French/Dutch. Good English knowledge is required. French/Dutch knowledge would be a bonus.

As the Optimisation Network Engineer, your main responsibilities will be:

- Participation in customer projects - Collection and analysis of customer requirements - Perform Network Optimisation at cellular level in order to contribute to regional quality of service by Investigating network performance (based on analysis of drive tests results, clients complaints, performance indicator) - Issuing, discussing and/or implementing optimisation recommendations (optimisation of cell parameters and aerials) for network improvement - Perform daily cell troubleshooting and take adequate actions to solve issues (Worse Cell Listing) - Perform cluster optimisation in order to improve quality - Analyse, solving and answering of quality & coverage customer complaints in due times - Share knowledge from service deliveries in applicable forums

The successful candidate will have the following attributes:

- Industrial Engineer Electronics/Telecommunication or equal - Minimum 2 years in Design/optimisation 2G/3G especially domain RAN & Optimisation. - Good knowledge of 2G Nortel RAN & 2G/3G HUA RAN including U900, 2nd carriers, 3rd carriers- Very good knowledge of Radio Planning tool (Asset) - Very good knowledge of post processing tools Metrica, PRS and Actix. - Knowledge of optimisations tools like Optimi - Very good knowledge of Microsoft Excel PowerPoint - Access

To apply for the position of Optimisation Network Engineer please send an updated C.V to nicola.park@projectpeople.com Project People Ltd is acting as an Employment Business in relation to this vacancy.

Telecoms Engineer - PBX / IP Telephony

Role: Commissioning Engineer Experienced required: Panasonic or Nortel BCMLocation: Buckinghamshire / Berkshire / Oxfordshire.Benefits: Salary c25,000 + Car + Bonus (up to 300 per month) (Negotiable depending on experience)

Our client is a UK wide multi-million, market leading and fast moving Telecoms industry success story. Established since 1998 they are dynamic, growing and they provide specialist business-to-business Telecommunications solutions. The company has partnerships with many world leading Telecoms manufacturers and suppliers. In line with on-going business success and an increasing order book, they now seek an experienced Telecoms (PBX / IP Telephony) Field Engineer based in Buckinghamshire or surrounding areas.

For this Installation, Maintenance, Commissioning and Customer Support role, the successful candidate will ideally be experienced on the Panasonic range or Nortel BCM systems (or alternatively similar PBX / IP Telephony systems). The more experience and formal training / accreditations on Panasonic and Nortel BCM phone systems the better. The company will also seriously consider engineers who have experience on other systems such as LG Ericsson, Siemens, BT Versatility etc.

Job Description:

*Understand the installation, programming and diagnostics of Panasonic and Nortel BCM systems.*Quality of the candidates work is paramount to ensure customer sign off, enabling the sales department to be paid for the sale.

Responsibilities:

*Installation of Panasonic and Nortel BCM systems*Programming of Panasonic and Nortel BCM systems*Fault diagnosis of Panasonic and Nortel BCM systems*Achieving customer sign off of installation*Off site up to 95% of the time

Profile Specific to Role:

*Strong communicator at all levels (oral and written)*Strong organisational skills*Tact and diplomacy

Experience:

*Excellent experience of Panasonic and Nortel BCM Systems*Knowledge of other types of systems such as LG Ericsson, Siemens, BT Versatility etc. would be an advantage, as would knowledge of Oak products*Experience of programming and diagnostics*Awareness of telecommunications products

Engineer RF is responsible for contributing in the RF Design of the regional cellular network. Responsibilities include: creating search areas within their geographic area of responsibility; working with the performance team to understand area and issues within his/her sector; and working with System Performance counterpart to understand issues and help reduce Lost Calls and Ineffective Attempts within their sector. Other responsibilities include: creating and supplying cell site translations; performing drive testing to evaluate search area candidate as necessary; preparing FCC/FAA and FAS submissions in a timely manner; performing radio engineering evaluation for system planning and site acquisition; beginning to identify location specific needs for new cells taking baseline, performance, capacity, and population into consideration; and evaluating coverage problems and requirements for coverage cells. BS in Engineering or Computer Science or equivalent work experience required 2+ years of experience in the cellular or telecommunications industry. General understanding and or working knowledge in one or more of the following platforms and/or technologies: Voice cells infrastructure including: Lucent, Motorola, Nortel, CDMA data Digital Communications including: DS1, DS3, Fiber, ISDN Operating systems and applications including: UNIX, Windows, MS Office Wireless data service including: CDPD, CDMA, CSD, STP, RF Fingerprinting Analog, CDMA, Flexent Modular cells (CDMA & PCS), RMT software, and 3G technology Test equipment including: T-Birds, DataPro, pilot scanners, baseline equipment, spectrum analyzers RF System Optimization techniques for voice and data for Nortel, Motorola, and/or Lucent infrastructure Should have a good understanding of engineering concepts, and must show aptitude and desire to learn and advance in a technical field. Proficient in office computer applications: Excel, Word, PowerPoint, and Access

To apply please forward resume toonlinecareers@ttswireless.com. TTS Wireless offers highly competitive compensation packages including benefits; medical/dental/vision, etcJenifer LeTelecom Technology Services Inc.7901 Stoneridge DrSte 500Pleasanton, CA 94588Phone: (469) 277-2235Web: http://ttswireless.com/

Job Description Cell Technician Mishawaka, INResponsibilities The Cell Tech for this position will be responsible for the maintenance of all cell sites in the Northern Indiana Market with the switch being located in South Bend/Mishawaka Indiana. They will have to be able to support an on-call rotation and support nightwork. The individual will be responsible for a group of cell sites and their day to day operations to include but not limited to, Antenna infrastructure, Cell site maintenance (quarterly, semi-annual and annual PM's). The individual should be able to install/maintain and troubleshoot, Ericsson & NSN BTS, Ethernet Backhaul, Cisco routers, NID's. Sweeping and PIM transmission lines and be able to troubleshoot Intermod. These duties encompass a broad scope of the work which happens at the cell sites. The candidate must be a self-starter and be able to have minimum supervision with a positive attitude. Qualifications Experience with Ericsson & NSN BTS, Cisco 1k equipment, Ethernet Backhaul. Equal Employment Opportunity We are an equal opportunity employer m/f/d/v. Responsibilities The Cell Tech for this position will be responsible for the maintenance of all cell sites in the Northern Indiana Market with the switch being located in South Bend/Mishawaka Indiana. They will have to be able to support an on-call rotation and support nightwork. The individual will be responsible for a group of cell sites and their day to day operations to include but not limited to, Antenna infrastructure, Cell site maintenance (quarterly, semi-annual and annual PM's). The individual should be able to install/maintain and troubleshoot, Ericsson & NSN BTS, Ethernet Backhaul, Cisco routers, NID's. Sweeping and PIM transmission lines and be able to troubleshoot Intermod. These duties encompass a broad scope of the work which happens at the cell sites. The candidate must be a self-starter and be able to have minimum supervision with a positive attitude. Qualifications Experience with Ericsson & NSN BTS, Cisco 1k equipment, Ethernet Backhaul.

Job DescriptionA Kforce client in Saint Louis, Missouri (MO) is seeking a Field Technician.

Main Duties:

* Responsible to perform preventative and corrective maintenance of cell site and auxiliary equipment* Be responsible for planning and performing administrative tasks* Perform inventory functions such as receive, assign, and track parts within inventory management software program* Working with integration and commissioning of wireless networks* Use analysis tools to identify equipment related problems

Specific Qualifications:

* Wireless industry experience is required* Must have 3 years of experience working with integration and commissioning of wireless networks* Telecom experience with data networking technologies troubleshooting capabilities is necessary* Must have experience with analysis tools to identify equipment related problems* Basic computer skills are required* Bachelor's degree preferred

Wireless Traffic Engineer Big Spring, TXResponsibilities Responsible for RF capacity planning and traffic engineering for the region. The Engineer IV will perform capacity forecasting and planning for the RF and backhaul elements and will also work closely with other departments such as switch and data engineering dependent upon forecasting outputs. The traffic engineer will also work with project implementation driving and prioritizing capacity augmentation projects. The engineer will either develop or use complex tools for monitoring the network and will perform complex analysis of system data as related to capacity management. Manages multiple projects at a time. -Monitor utilization on RF air interface and backhaul at both a trended and daily level. Issue growth jobs proactively to address these needs. -Monitor critical thresholds for cell, switch, backhaul, and data networks and work with associated departments to address capacity related items. -Develop using corporate or local tools long term capacity forecast for RF and other network elements. -Maintain RTU licenses and adjust CE levels as needed for capacity. -Recommend performance related changes to the network to improve capacity. -Monitor and design special event locations from a capacity standpoint including long term plans and special event preparation. Develop and present reports for special events. Determine after action results and solutions for future events based on current event statistics and results. -Develop capacity site needs for each market and work with RF Design in implementation of the sites. Also push for or develop alternative solutions as required to offload traffic within an area. -Develop overall frequency layout plans for the region including carrier apportioning and carrier allocation. -Create reports for management detailing capacity related issues and/or performance. -Create tools, spreadsheet and databases for internal customer use as related to capacity. -Collaborate with other network groups e.g. Project Management, System Performance and Operations for handling multiple projects directly impacting the capacity augmentation of the network. -Work closely with Area Planning to determine requirements for RF budget. Qualifications -Bachelors Degree in Engineering required; Masters Degree desired -Five years experience in RF Design or RF Performance preferred -Strong technical knowledge of CDMA/EVDO and LTE technologies. Have a solid understanding of RF fundamentals and data network protocols. -RF Design and Performance Engineering knowledge and experience -Experience with Prospect and XNG, NCWS, RTT, ALPT, E-Health, Handset Analyzer. Knowledge of traffic planning fundamentals including traffic modeling, forecasting methods, and tools. -Working knowledge of Base Station Vendor equipment (Alcatel Lucent ). -Knowledge of Mapping Software, such as, MapInfo and RF propagation planning tools. -Working experience with Microsoft Excel and Power Point. -Strong analytic and interpersonal communication skills, proven ability to manage multiple priorities, detailed oriented. -Valid Drivers License

Job Description Technician-Cell Plymouth Meeting, PAResponsibilities This position will cover Cell Sites in the Allentown area. This position is responsible for the proper operation of a large group of Network Elements. Duties in support of interdepartmental objectives, to include preventative and remedial maintenance, installation, optimization, building and ground upkeep, and integration of network hardware and interconnect facilities. Other responsibilities include maintaining and repairing all base station equipment and transmitters; maintaining site and test equipment inventories; testing and analyzing network coverage to ensure contiguous communication and network integrity and quality; updating daily logs with site-specific information; composing clear and concise reports for system documentation; and performing audits as required by local, regional, Area, Corporate or Regulatory agencies. The Technician - Cells is expected to be able to perform his duties with little supervision, and participate in cross-functional projects as scheduled. Performs preventative and remedial maintenance on all base station and transmitter equipment. Performs installation and optimization of same. Performs routine building and grounds maintenance and inspections. Integrates Network hardware and interconnect facilities. Analyzes network coverage to ensure contiguous communication and network integrity. Makes recommendations to engineering for improving network coverage and implement. Maintains inventories of test equipment, base station, and transmitters. Updates daily logs with site-specific information. Composes clear and concise reports for system documentation. Qualifications Bachelor degree preferred. Minimum technical degree with equivalent work experience is required. Minimum 2-years of experience plus electronics training in one or more of the following fields: telecommunications, In-Building Systems, two-way radio, paging, or microwave radio is required. Demonstrated knowledge of the following technologies and/or platforms: voice and data cells infrastructure experience including: Lucent, Ericsson, LTE, CDMA data; telecom experience including: T1, DACS, OMP; computer support experience including: PC hardware and configurations, troubleshooting; and power experience including: Galaxy, Lorain, DC distribution systems, and troubleshooting. Intermediate training in at least 3 of the following areas: data communications, digital communications, operating systems and applications, telecommunications, computer support, project management, and/or power. Working knowledge of Microsoft Office and Outlook is required. Ability to lift up to 60 lbs. is required. A valid driver's license is required.