©skeldale house, christmas fsl lace snowflakes and...
TRANSCRIPT
©Skeldale House, Christmas FSL Lace Snowflakes and Ornament Covers 2005
file:///C|/Users/Robyne/Documents/05_SkeldaleHouse/FSL/FSL_christmas_2005/christmas-2005_instructions.html[11/18/2012 8:43:31 AM]
3D and Free standing Lace Snowflakes and Ornament Covers
Christmas 2005
Total Ornaments 26 No Jumps Stitches
Available Formats DST, EXP, HUS, JEF, PES, VIP, VP3, XXX
There are 26 ornaments.. in variations12 FSL Snowflakes
3 3D Snowflakes11 Ornament Covers
Design's are Free Standing Lace when done as directedI used 2 layers of Vilene,
number 12 schmetz universal needle,40 weight Madeira Rayon thread on top and a fine bobbin thread.
I rinsed the vilene out holding each ornament under warm water a few seconds only, Not tested with any other stabilizer
©Skeldale House, Christmas FSL Lace Snowflakes and Ornament Covers 2005
file:///C|/Users/Robyne/Documents/05_SkeldaleHouse/FSL/FSL_christmas_2005/christmas-2005_instructions.html[11/18/2012 8:43:31 AM]
there is no number 7 in the covers
©Skeldale House, Christmas FSL Lace Snowflakes and Ornament Covers 2005
file:///C|/Users/Robyne/Documents/05_SkeldaleHouse/FSL/FSL_christmas_2005/christmas-2005_instructions.html[11/18/2012 8:43:31 AM]
Cut around the snowflake/coverand rinse under warm water.
takes only a couple seconds todissolve
Lay on towel and pat excess waterout
Pin the snowflake right side downto styrofoam, be gentle.
©Skeldale House, Christmas FSL Lace Snowflakes and Ornament Covers 2005
file:///C|/Users/Robyne/Documents/05_SkeldaleHouse/FSL/FSL_christmas_2005/christmas-2005_instructions.html[11/18/2012 8:43:31 AM]
and pin your covers to StyrofoamballsI used the 3 inch size as that is thesize my glass bulbs are
cover 3 shown on a teardrop glassbulb
to assemble the 3 D sew 2 partstogether loosely with a zigzag.6 parts needed for one 3Dsnowflake, so you will have 3parts to glue togetherI ran a bead of Aleen's Glue downthe center of the sewn togetherpieces (any fabric Glue WIll do)let sit till tacky, at 60 degreeangles glue the 3 sectionstogether. you can also forget the sewing and just glue the parts together at60 degree angle. both ways work fine
Design Specifications
©Skeldale House, Christmas FSL Lace Snowflakes and Ornament Covers 2005
file:///C|/Users/Robyne/Documents/05_SkeldaleHouse/FSL/FSL_christmas_2005/christmas-2005_instructions.html[11/18/2012 8:43:31 AM]
©Skeldale House, Christmas FSL Lace Snowflakes and Ornament Covers 2005
file:///C|/Users/Robyne/Documents/05_SkeldaleHouse/FSL/FSL_christmas_2005/christmas-2005_instructions.html[11/18/2012 8:43:31 AM]
1997 © 2013Skeldale House