skate craft blog jan 2012 fleece pillow

SkateCraft • SkateCamp C. 2011 by SkateCraft. All rights reserved. May not be copied or reproduced without consent. NOT for resale. Tied Fleece Pillow with Happy Skate Applique Supplies (for pillow only): • 5/8 yard fleece fabric (21 1/2”) • Poly-fil/Fiberfill stuffing Pattern Pieces: • Corner/Ties Cutting Guide (p. 3) Tools: • Marker • Ruler • Pins • Scissors www.http://skatecrafting.blogspot.com email: [email protected] • Store: www.etsy.com/shop/ Directions: 1. a. Fold the fleece in half so that the right sides of the fabric are together; make sure that the edges are even. b. Use your ruler and a marker to draw a 19” square on the fabric. c. Use the Corner/Ties Guide to mark all four corners and the ties along each edge of the pillow. 2. Pin the pillow pieces together, then carefully cut the outer edges of the pillow only. You will have two squares 19” x 19”. 3. Cut the ties along each edge of the pillow; discard the corner cut-outs*. 4. Flip the fleece pieces so that right sides of the fabric are on the outside. 5. Starting at one corner, tie the two squares together using a regular (square) knot; tie 3 sides of the pillow together. 6. a. Stuff the pillow with the Poly fill/Fiberfill stuffing. b. Tie the remaining side of the pillow together. See HAPPY SKATE APPLIQUE directions to decorate your pillow. *Use the fabric scraps to make mini “throwies” for all your friends. Send us a picture of what you’ve made and we will post it on our blog!

Upload: jtskatecrafter

Post on 03-Oct-2014

21 views

Category:

Documents

4 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: Skate Craft BLOG JAN 2012 Fleece Pillow

SkateCraft�•� SkateCamp�

Tied Fleece Pillow�with Happy Skate Applique�Supplies (for pillow only):�• 5/8 yard fleece fabric (21 1/2”)�• Poly-fil/Fiberfill stuffing�

Pattern Pieces:�• Corner/Ties Cutting Guide (p. 3)�

Tools:�• Marker�• Ruler�• Pins�• Scissors�

www.http://skatecrafting.blogspot.com�

email: [email protected] • Store: www.etsy.com/shop/�

Directions:�1. a. Fold the fleece in half so that the right sides of the fabric are together;�

make sure that the edges are even.� b. Use your ruler and a marker to draw a 19” square on the fabric.� c. Use the Corner/Ties Guide to mark all four corners and the ties along�

each edge of the pillow.�2. Pin the pillow pieces together, then carefully cut the outer edges of the�pillow only. You will have two squares 19” x 19”.�3. Cut the ties along each edge of the pillow; discard the corner cut-outs*.�4. Flip the fleece pieces so that right sides of the fabric are on the outside.�5. Starting at one corner, tie the two squares together using a regular�(square) knot; tie 3 sides of the pillow together.�6. a. Stuff the pillow with the Poly fill/Fiberfill stuffing.� b. Tie the remaining side of the pillow together.�See HAPPY SKATE APPLIQUE directions to decorate your pillow.�

*Use the fabric scraps to make mini “throwies” for all your friends.�

Send us a picture of what you’ve made and we will post it on our blog!�