sixth international congress on computational mechanics and

SIXTH INTERNATIONAL CONGRESS ON

COMPUTATIONAL MECHANICS AND SIMULATION

27th

June – 1st

July 2016

Organizer

Venue:

VMCC, IIT Bombay, Powai, Mumbai 400 076, India

Under the Aegis of

WORKSHOP AND CONGRESS SCHEDULE

IIT BOMBAY VJTI

ICCMS2016 IIT Bombay, Mumbai, India, June 27-July 1, 2016

27th June

18:30 to 20:30

28th June

08:00 – 09:00

09:00 – 10:00

10:00 – 10:30

10:30 – 11:15

11:30 – 13:30

13:30 – 14:30

14:30 – 16:30

16:30 – 16:45

16:45 – 18:45

29th June

08:30 – 09:30

09:30 – 10:15

10:15 – 11:00

11:00 – 11:30

11:30 – 13:30

13:30 – 14:30

14:30 – 16:30

16:30 – 16:45

16:45 – 18:45

30th June

08:30 – 09:30

09:30 – 10:15

10:15 – 11:00

11:00 – 11:30

11:30 – 13:30

13:30 – 14:30

14:30 – 16:30

16:30 – 16:45

16:45 – 18:00

18:30 – 19:30

20:00 – 22:00

1st July

08:30 – 09:30

09:30 – 11:30

11:30 – 11:45

11:45 – 13:30

13:30 – 14:30

14:30

Parallel Sessions – IX

Parallel Sessions – X

Lunch

Congress Conludes

Tea Break

Banquet Dinner

Break-fast

Plenary Session – 5 by Prof. P. Nithiarasu

Tea Break

Parallel Sessions – VII

Lunch

Parallel Sessions – VIII

Tea Break

Parallel Sessions – VI

Break-fast

Plenary Session – 4 by Prof. B. L. Karihaloo

Felicitation of Professor Tarun Kant

Light Classical Programme

Tea Break

Parallel Sessions – IV

Lunch

Parallel Sessions – V

Tea Break

Tea Break

Parallel Sessions –III

Break-fast

Plenary Session – 2 by Prof. Ramesh Talreja

Plenary Session – 3 by Prof. Yoshimra Shinobu

High Tea

Plenary Session – 1 by Prof. Tarun Kant

Parallel Sessions – I

Lunch

Parallel Sessions – II

25-27 June Workshop (6hrs per day in slots of 90 minutes)

Congress Schedule

Ice Breaker Reception and Registration

Registration

Inauguration

Venue: Seminar Hall, First Floor, Civil Engineering Department, IIT Bombay

Topics: Finite Element Method, Computational Design Optimization, Computational Fluid Dynamics

Page 1

Sixth International Congress onComputational Mechanics and Simulation

Date Duration Details

09:00 to 09:30 Hrs Inauguration

09:30 to 10:00 Hrs High Tea

10:00 to 11:30 Hrs Lecture 1

11:30 to 11:45 Hrs Tea Break


13:15 to 14:00 Hrs Lunch


















Lunch will be served at Civil Engineering Department, Terrace.

ICCMS2016: Pre-Congress Workshop Schedule

25 – 27 June 2016

25th June 2016

26th June 2016

27th June 2016

Speakers: Professor Tarun Kant, Professor Yogesh Desai, Professor Ramana Grandhi, Professor Perumal Nithiarasu

Topics: Finite Element Method, Computational Design Optimization, Computational Fluid Dynamics

Venue: Seminar Hall, First Floor, Civil Engineering Department, IIT Bombay

High Tea/ Tea will be served at Civil Engineering Department, First Floor.

Page 2


08:00 – 09:0009:00 – 10:00 10:00 – 10:3010:30 – 11:15

Session ID S-01 S-02 S-03 S-04 S-05 S-06

Venue Lecture Hall 21 (Second Floor)

Lecture Hall 22(Second Floor)

Lecture Hall 23 (Second Floor)

Seminar Room 11(First Floor)



Theme Solid and Stuctural Mechanics Composite Structures Computational Fluid Dynamics Dynamics Fluid Structure Interaction Fracture and Damage MechanicsChairperson Bhaskar A. Santosh Kapuria Sanjay Mittal R S Jangid S K Bhattacharyya Nagesh Iyer

11:30-11:45 53 Response Analysis of Adjacent Structures Connected by Friction Damper by Patel Chirag

11:45-12:00

73 Simulation of Quarter Car Model for the Shock Absorber Compliance with Rubber Bush

and Washers by Vijay Barethiye, Goutam Pohit, Anirban Mitra

12:00-12:15

126 Numerical and Analytical Modelling of Reinforced Concrete Circular Columns Under Torsion by Tarutal Ghosh Mondal, Suriya Prakash,Anand Ganganagoudar

42 Finite Element Modeling of Functionally Graded Material Plates: An

Assessment of A New Shear Deformation Theory for Free Vibration Response by Ankit Gupta,Mohammad

Talha

63 Numerical Modeling of Flow Around Cylindrical Bridge Piers with and

without Pile-Cap by Priyanka Gautam, Vijayasree B.A., Eldho T. I., Behera M.

R., Mazumder B. S.

118 Bispectral Analysis for Nonlinear Identification of Structures by Prawin J, Rama

Mohan Rao A

43 3D Coupled CFD-FEA Dynamic Stall Analysis of 5 Mw Nrel Wind Turbine

Baseline Rotor by Nisar Fatima, K.V.N Gopal

315 Damage Detection in Composite Beams Using Vibration Based Method by Sudeep

Joshi, V.B.Dawari

12:15-12:30

959 Analysis of Spherical Dome with Openings Using Finite

Element Method by Saalim Khan, Hrishikesh Murgudkar, Sanjay

Takekar, Abhay Bambole

69 Two-Dimensional Static Analysis of Composite Plate Subjected to Arbitrary Boundary Conditions Using Extended

Kantorovich Method by Poonam Kumari, Agyapal Singh, Abhishek

Yadav

70 Modified Kinetic Streamlined-Upwind Petrov Galerkin Method for Euler Equations of Gas Dynamics by

Ameya Jagtap

119 Numerical Investigation into Effect of Cell Size of Honeycomb Core on the Free Vibration

Behaviour of Polymer Nano-Composite Sandwich Beams by Royal Madan, Rajesh

Kumar Bhushan, Santosh Kumar Sahu, P.S. Rama Sreekanth

827 Investigation of Vibration Transmission in Cantilevered Structures Submerged in

Fluid Considering Fluid-Structure Interaction by Sumathi V, Sumathi V,

Jalaldeen S, Selvaraj P, Murugan S

324 Fatigue Analysis of Concrete Members Under Variable Amplitude Cyclic Loading by Jeshna C. C., Sonali Bhowmik, Sonalisa Ray

12:30-12:45

176 Study of Rayleigh Wave in Orthotropic Layer Lying Over an

Orthotropic Half-Space with Initial Stress by Abhinav Singhal,

Sanjeev A. Sahu

97 Finite Element Modelling of FRP Composite Joints Considering Bolt Torque by Bibekananda Mandal,

Anupam Chakrabarti

105 High Enthalpy Simulations for Shock Wave Boundary Layer

Interaction by Vinayak Kulkarni, Siddesh Desai, Hrishikesh Gadgil

169 A FE Model for Dynamic Behavior of A Functionally Graded Rotor-Bearing System by

Debabrata Gayen, Debabrata Chakraborty, Rajiv Tiwari

922 Fluid-Film Dependent Added Mass and Added Damping for Parallel Plates by

Verma G., Eswaran M, Samiran Sengupta, G Ramireddy, Bhattacharya S.

254 An Innovative Method for Solving Structural Engineering Problems by P. V.

Ramana, Kunal B, Rishabh Gupta, Niteesh Agrawal, Arun Kumar Singh

12:45-13:00

51 Correlations Between Stiffness And Microstructure of A Species of Bamboo by Mannan Sayyad,

Sumit Basu

150 Thermal Stress Analysis of Functionally Graded Plates and Open Cylindrical Shells by Devesh Punera,

Tarun Kant

116 Design and Testing of Axial Fans for Cooling Engines by Dafedar

Abdulazeem, Abinash Baruah, Shyam Kumar

178 Seismic Behavior of LNG Tank Isolated by Double Variable Curvature Friction Pendulum System by Falguni Patel, Devesh P Soni, Neha

H Chauhan

981 Effect of Heat Transfer in Supersonic Flow Reattachment by Sreejith K, Nandan

Kumar Vidyarthi, M Deepu

383 Mixed Mode Stress Intensity Factor and Crack Growths Modeling of Double Edge

Cracks Laminated Composite Plate Subjected to Tensile and Shear Loadings Using Xfem by Achchhe Lal, Sameer B. Mulani, Rakesh

K. Kapania, B.N. Singh

13:00-13:15

65 Rayleigh Wave Propagation in Liquid Layer Lying over A Pre-Stressed Orthotropic Half-Space by Soniya Chudhary, Sanjeev A.

Sahu

203 Static Response of Wind Turbine Blade Under Actual Loading Effect by Santanu Choudhury, Tushar Sharma,

K.K.Shukla

125 Aakalan - A Third Order Finite Volume Solver for Unstructured Meshes

by Chaitanya Bapat

186 Seismic Response of Short-Period Buildings with Special Reference to Response

Reduction Factor by Omkar Pingale, S. N. Madhekar, S. M. Pore

1169 Explicit Time Marching Coupling Schemes for Fluid-Structure Interactions by

Lokanna Hoskoti, Mahesh M S

435 Mechanics of Fracture of Porous Bulk Metallic Glasses by Rahul Hajare, Parag

Tandaiya

13:15-13:30

599 Effect of Cover to Longitudinal Reinforcement of Square RC Column for Axially

Compression Testing. by Narule G., Bambole A.N.

210 Steel-Concrete Composite Structure-An Advanced Material by Suresh Sahu

848 Thermohydraulic Transport Characteristics of Inclined Ribs in Micro Channel by Satyaki Basu,

Indroneel Roy Chowdhury, Sampad Gobinda Das, Himadri Chattopadhyay

558 Free Vibration Analysis of Isotropic Moderately Thick Spherical and Conical Shell Panels Using a Four Node Discrete Kirchhoff Quadrilateral Flat Shell Element. by Shripad

Kulkarni, Vishal Chopade, Arjun Badhe, Vaishali Dagade

1175 Aeroelastic Stability of Delta Wing Configuration by Dinesh Aravinth, Mahesh

M.S

442 Determination of Size Independent Fracture Energy for Various Grades of Concrete Beams- Three Approaches by

Hemalatha T, A. Ramachandra Murthy, M. Aravindan

13:30-14:30

Keynote LectureFree Edge effects in Sandwich

Laminates Under Tension, Bending and Twisting Loads by Dhanesh N and

Santosh Kapuria

Keynote LectureFinite Element Computations of

Complex Flows by Sanjay Mittal, Chopra G., Furquan M., Navrose, VMK

Kotteda and Bhatt V.

Keynote LectureTuned Sloshing damper in Response

Control of Tall Building Structure by S.K. Bhattacharyya

Keynote LectureAdvanced Methodologies for Fracture

Analysis and Damage Tolerant Evaluation by Nagesh Iyer, Palani G.S. and Ramachandra

Murthy A.

Lunch

Program Details (Tuesday, 28 June 2016) [Forenoon Session]RegistrationInauguration

High TeaPlenary Session – 1 by Prof. Tarun Kant at Prof. B. Nag Auditorium, VMCC

Keynote LectureLong Waves in Lattice

Waveguides by Bhaskar A, Cuan-Urquizo E

Plenary Talk: 45 minutes each (3 mins intro + 35 mins talk + 7 mins Q/A) Keynote Lecture: 30 minutes each (2 mins intro + 25 mins talk + 3 mins Q/A) Paper Presentation: 15 minutes each (1 min intro + 12 mins talk + 2 mins Q/A)All venues are at VMCC, IIT Bombay, Powai, Mumbai 400076

Page 3









Theme Solid and Stuctural Mechanics Composite Structures Computational Fluid Dynamics Dynamics Heat Transfer Fracture and Damage MechanicsChairperson C S Jog D K Maiti T I Eldho R S Jangid Amit Agrawal Nimal Rajapakse

14:30-14:45

157 Bending and Buckling Analyses of Composite Laminates with and without

Presence of Damage and its Passive Control with Optimized Piezoelectric

Patch Location by D.K. Maiti

327 Hydraulic Performance Analysis on Corrugated Type Plate Heat Exchanger by Bhupal Kumar, Deepak Singh, S. N.

Singh

215 Dynamic Behaviour of Communication Antenna for Space Missions: Modeling and Simulation by Jataraman S., Manish Trikha, Somashekar V.N., Kamesh D, Venkatesh K,

Moogina Ravindra

14:45-15:00228 Orthogonal Cutting Process

Modeling of Idealised CFRPS by Sagar Kubher, Gururaja S.

428 On Bubble and Spike Evolution in Rayleigh-Taylor Instability by B. Ghosh

576 Dynamic Analysis of Flat Slab RC Structure by Abhishek Dhangar, Narule

Giridhar

15:00-15:15

100 An Experimental Study on Slender Hollow Circular Stainless

Steel Columns with Single Circular Perforation Subjected to

Axial Compression by Ricky Lalthazuala, Konjengbam

Darunkumar Singh

285 Numerical Studies on Flange Buckling Behaviour of FRP Box-Beams by Kasi Viswanathan, Akhil Upadhyay

545 Thermo-Hydraulic Simulation of Oxidizer Booster Pump for

Semicryogenic Engine by Basil George Thomas, Unnikrishnan Nair P, Sunil

Kumar Sarangi, V Narayanan

242 Nonlinear Analysis of Active Vibration Absorber with Self Sensing and Actuating PZT

Actuator by Acceleration Feedback by Sibananda Mohanty, Santosh Kumar Dwivedy

127 Solution of Stochastic Heat Conduction Problem Using Galerkin Based Polynomial Correlated Function Expansion by Souvik

Chakraborty, Rajib Chowdhury

444 Obtaining Fracture Properties of FRC by Inverse Analysis Using the PGSL

Optimization Algorithm by Stefie J Stephen, Benny Raphael, Ravindra Gettu

15:15-15:30

109 Gauge Widening/Condemning of Parabolic Profile Locomotive

Wheels While Braking with Composite Brake Blocks by

Vineesh K. P., M R K Vakkalagadda, V. Racherla

286 Theoretical Study on Basalt Fiber Reinforced Composite (BFRC)

Sandwich Panel Under Flexure by Smriti Raj, Bharatkumar B. H., Ramesh Kumar

V.

548 Noise Radiation from Compressible Reacting Mixing Layers by P

Shivakanth Chary, Arnab Samanta

410 Use of Top Weak Storey of Multistoreyed Building As A Tuned Mass Damper for

Seismic Response Mitigation by Suhasini Madhekar, Jayawant Ghadage, Shivam

Deshmukh, Digvijay Kawle, Ketak Gunjal, Abhay Hoke

194 Comparison of Flow and Heat Transfer Characteristics in Triangular and Sinusoidal Shaped Wavy Channels by Harikrishnan S,

Shaligram Tiwari

481 Meshfree Analysis of Beams and Columns in the Presence of Initial Damage by

Aman Gupta,C.O. Arun

15:30-15:45

111 Flexure of Fixed Thick Beam Using Trigonometric Shear

Deformation Theory by Ajay Dahake, Satish Manal, Raj Sawant

354 Effect of Delamination Size and Location on the Dynamics of Thin Pretwisted Strips by Salunkhe S.B.,

Guruprasad P.J.

738 High Fidelity Simulation of Flow Over a Flapping Wing Using Parallel Computing by Chandan Bose, Sunetra

Sarkar, Sayan Gupta

429 Seismic Vibration Control for 20-Story Non-Linear Benchmark Building: A State-of-The-Art Review by Raghav Moyade, Suhasini

Madhekar

227 Thermal Behaviour Analysis of V-Through Flat Plate Solar Water Collector: An Experimental and CFD Based Study by

Arun Jangid, Naveen Kumar Sharma, Sheetal Kumar Jain, Manish Dadhich, Vikas

Sharma, Dhirendra Agarwal

514 Numerical Analysis of Electro-Chemical Model for Pitting Corrosion by Vagbharathi

A S, S Gopalakrishnan

15:45-16:00

112 Micromechanical Modelling of Spiral Wound Gasket Under Uniaxial Compression by Rino Nelson N, N. Siva Prasad, A. S.

Sekhar

360 Stiffened Plates of CNT Reinforced Composites: Static Response Using

FEM by Anindya Bhar,Rekha Shakya

851 Computational Investigation of Secondary Flow Losses in Linear

Turbine Cascade by Modified Leading Edge Fence by Kiran K N, Anish S

473 Optimization of Passive Vehicle Suspension System by Genetic Algorithm

Using Matlab/Simulink by Gaourav J. Desai, Saaish R. Patwardhan, Parag H. Shirke,

Waseem M. H. Kurne, Nilotpal Banerjee

257 Effect of Location of Heat Source and Rayleigh Number on Natural Convection in

A Square Cavity Using Thermal Lattice Boltzmann Method by Chandrashekhar

Sewatkar, M. Y. Patil, A. J. Patil

537 Edge Crack Simulation Using T-Spline Based Xiga by Sunil Kumar Singh,

Gagandeep Bhardwaj,I.V. Singh, B.K. Mishra

16:00-16:15

130 Analysis of Prestressed Hollowcore Slabs with Openings:

A Numerical Study by Sameer Kumar Sarma Pachalla, Surya

Prakash S.

445 Coating Effect on Engine Piston Thermal Behaviour by Tanweer Alam, M. Nagendra Babu, Prashant Kumar

153 Unsteady Flow in a Rectangular Lid-Driven Cavity by Dalai B., Laha M.K.

502 Comparitive Study Between Non-Parametric Magneto-Rheological (MR)

Damper Model with Parametric Bouc-Wen Magneto-Rheological Model by Hemantha

Kumar, K. V. Gangadharan

308 Computational Analysis of Flow and Thermal Characteristics of Pin-Fin Heat Sink by J. Manogna, R. Deepakkumar,

Jayavel S.

551 Stochastic Fracture Analysis of Laminated Composite Panel with Elliptical Crack Subjected to Biaxial Load Using X-

Fem by Palekar S.P., Achchhe Lal

16:15-16:30

140 HDMR Based Model Updating in Structural Damage Identification by Naveen B O,

Balu A S

272 Detection of Damage in Surface-Mounted PZT Transducers using

Voltage Amplitude Spectrum by Ashwin Umesh, Sathyanarayana C. N., Raja S

162 Numerical Simulation of Mixed Convection in a Complicated Porous

Enclosure by Anirban Chattopadhyay, Swapan Kumar Pandit

143 Dynamic Characteristics of Printed Circuit Boards: A Parametric Study by Jayaraman S, Manish Trikha, Somashekar VN, Kamesh D,

K.Venkatesh, M.Ravindra

436 Design, Manufacturing and Performance Analysis of Different

Thermoplastic Gears in the Gearbox for Moped by Amarjeet Gupta, Sanjay N.

Aloni, Swati N. Datey,

581 Numerical Studies on the Influence of Notch Depth and Location on the Natural

Frequency of Indeterminate Beams by Stuti Mondal,Varun Koneru, Kalyana Ram J S,

Ramachandra Murthy A16:30-16:45

All venues are at VMCC, IIT Bombay, Powai, Mumbai 400076Plenary Talk: 45 minutes each (3 mins intro + 35 mins talk + 7 mins Q/A) Paper Presentation: 15 minutes each (1 min intro + 12 mins talk + 2 mins Q/A)

Program Details (Tuesday, 28 June 2016) [Afternoon Session]

Keynote LectureHybrid Finite Elements for

Structural Analysis by C.S. Jog

Keynote LectureThree-Dimensional Numerical Study of Conjugate Heat Transfer in Diverging

Microchannel by Amit Agrawal

Keynote Lecture: 30 minutes each (2 mins intro + 25 mins talk + 3 mins Q/A)Tea Break

Keynote LectureAtomistic and Continuum Modelling of

Fracture Strength and Adhesion Properties of Graphene by Nuwan Dewapriya, Nimal

Rajapakse

Page 4









Theme Solid and Stuctural Mechanics Composite Structures Computational Fluid Dynamics Dynamics Multi Body Dynamics Material ModellingChairperson Sondipan Adhikari A V Singh T I Eldho Damodar Maiti G R Reddy Narayan Neithalath

16:45-17:00

171 Development of Bhism for Performance Based Blast Resistant

Design of Reinforced Concrete (RC) Structures by Suman Kumar, Hrishikesh

Sharma

1481 Earthquake Analysis of Concrete Gravity Dams: Some Recent Developments by Damodar Maity, Angshuman Mandal

207 Kinematic and Dynamic Analyses of 3-Link Cooperative Manipulators Handling

Hazardous Chemicals by Rajesh Ranjan, S. K. Dwivedy

1348 Microstructure-Guided Constitutive Modelling for Design and Development of Sustainable Next Generation Infrastructure

Materials by Naryanan Neithalath

17:00-17:15

195 CFD Simulation of Stratification/Dispersion of Helium

Layer by Two Heat Sources and Their Interaction in a Thermally Stratified

Vessel by Bhuvaneshwar Gera, S Ganju, R. J. Patel

515 Simulation and Analysis of Tool Chatter in Turning Operation by Yogesh Shrivastava,

Shailendra Kumar, Bhagat Singh

265 Pendulum Impact Test on Thermally Damaged Reinforced Concrete Frames by Shailesh Sharma, Tarvinder Singh, Parmar

R.M., G R Reddy

84 Inclusion Modelling in Concrete with the Extended Finite Element Method by Thirumalaiselvi A, Anandavalli N,

Rajasankar J

17:15-17:30

165 Static Analysis of Doubly Curved FGM Panel on

Rectangular Plan-form by Rajendra Bahadur, A.K.Upadhyay,

K.K.Shukla

511 Optimization of Sandwich Core FRP Bridge Deck by Tarun Gangwar,

Bibekananda Mandal, Anupam Chakrabarti

198 An Experimental and CFD Based Study to Improve Thermal Performance of Car Radiator Using Twisted and Wire

Mesh Inserts by Varying Mass Flow Rate by Jain S.K., Sharma M., Dileep Saini, Sharma V., Manish Dadhich,

Prajapati O.S.

559 Free Vibration Analysis of Functionally Graded Sandwich Plates Using Four Node Discrete Kirchhoff Quadrilateral Element

Based on Reddy'S Third Order Shear Deformation Theory. by Girija Deshpande,

Shripad D. Kulkarni

314 Response of Fire Damaged RC Slab Under Impact by Shailesh Sharma,

Tarvinder Singh, Parmar R.M., G R Reddy

240 Mathematical Model for Reinforced Concrete Problems by P. V. Ramana, Kunal

Bisht

17:30-17:45

166 Static Analaysis of Doubly Tapered Thin Walled Composite Box Beam Under Axial Loading

by Tushar Sharma, V.Murari, K.K.Shukla

555 Slenderness Effect on Behaviour of CFRP Wrapped RC Circular Column by

Giridhar Narule, Abhay Bambole, Ashish Rathod, Yogesh Lendave,

Gaurang Raut

202 GPU Implementation of DSMC Simulation Using Dsmcfoam Solver by Ankit Bansal, Shobhit Aggarwal, Ankit

Bansal

516 Harmonic Response of CFPI-Isolated Elevated Liquid Storage Tanks by Patel Jigar,

Vijay R. Panchal

483 Stroke and Tolerance Stack Up Analysis of an Automotive Side Door Latch

by Vinod Kumar R,Elango M,Naveen Udupa

278 Material Modeling and Simulations of Highly Flexible Structures by Vaibhav

Pawar, P.J.Guruprasad, Rajkumar S Pant

17:45-18:00

167 Strength and Vibration Analysis of Transmission Housing of a Tractor by Mayank Ahuja, N.

V. Deshpande, Sukumar Patil

572 Modal Analysis of Composite Beam Using Abaqus (FEA) by Harshad

Nawale, Sajal Roy, Kirankumar Jagtap

209 CFD Simulation of Hydrogen Distribution in Dry/Steam Condensing Environment in Kaiga Containment by

Bhuvaneshwar Gera, S Ganju, R. J. Patel

1368 Application of Friction Dampers for Improving the Seismic Performance of

Structures: An Overview by Saurabh Pednekar, Iwalekar A.A.,Bambole A.N.

520 Effect of Nonlinearities in the Suspension of Heavy Goods Vehicles on

Vehicle Road Interaction by Seshu P., Saudamini Joshi, C. Vichare, M.J. Pable

476 Analysis and Optimization of Multi-Plate Wet Clutch with Different Friction Materials

by Shaha Ubaid, Girish Tembhare

18:00-18:15

640 Seismic Analysis of Multistorey Building Using Steel Concrete

Composite Columns at Soft Storey by Sumeet Patil, Rahul Patil, Sneha Jangave

216 CFD Simulation and Experimental Validation of a Vertical Intake System

by Divya Samhitha Chunduri, T.I.Eldho

1250 Dynamic Characteristics of Retrofitted RC Frame Building with Yielding Type X-Shaped Metallic Elasto-Plastic Damper by

Madheswaran C.K., Prakashvel J., Sathishkumar K., Ashmimonisha I.

520 Effect of Nonlinearities in the Suspension of Heavy Goods Vehicles on

Vehicle Road Interaction by Seshu P., Saudamini Joshi, C. Vichare, M.J. Pable

532 Numerical Evaluation of Flexural Strength of NBG-18 Graphite by Manik Bansal, Singh I.V., Mishra B.K., Kamal

Sharma

18:15-18:30

Program Details (Tuesday, 28 June 2016) [Afteroon Session]

All venues are at VMCC, IIT Bombay, Powai, Mumbai 400076Plenary Talk: 45 minutes each (3 mins intro + 35 mins talk + 7 mins Q/A) Keynote Lecture: 30 minutes each (2 mins intro + 25 mins talk + 3 mins Q/A) Paper Presentation: 15 minutes each (1 min intro + 12 mins talk + 2 mins Q/A)

Keynote LectureNumerical Studies of Piezoelectric

Composites Using Nurbs for Geometry and Field Functions by A.V. Singh and

V. Raj

Keynote LectureMechanics of Irregular

Honeycomb Structures by Sondipon Adhikari, Tanmoy

Mukhopadhyay

Page 5


08:30 – 09:3009:30 – 10:1510:15 – 11:0011:00 – 11:30








Theme Solid and Stuctural Mechanics Composite Structures Computational Fluid Dynamics Dynamics Heat Transfer Non-Linear MechanicsChairperson Sauvik Banerjee Samsher Bahadur Singh T I Eldho R S Jangid K N Seetharamu Debasish Roy

11:30-11:45

183 Energy Absorption Characteristics of Aluminium Alloy 6061 Square

Corrugated Tubes Under Axial and Oblique Impact Loading by Sharad

Rawat, A.K. Upadhyay, K.K. Shukla

67 Experimental and Numerical Simulation of ECC Strengthened Masonry Structures in Flexure by

Shamsher Bahadur Singh

223 Numerical Simulation of an Amphibian Aircraft: Estimation of Hydrodynamic Forces and Stability

During Take-off and Landing by Abhishek Saini, Ankit Bansal

577 Analysis of Multi-Storey Building Under Biaxial Excitation. by Priyanka

Kalshetty, Giridhar Narule

11:45-12:00

440 Floor Response Spectra Considering Structural Nonlinearity Effect:

Experiments and Analysis by Paresh Kothari,Y. M. Parulekar,G. R.

Reddy,Girish V. Shenai

737 Ballistic Impact Response of Laminated GFRP Composite Plate:

Experimental and FE Analyses by Ansari M.D., Anupam Chakrabarti

236 Numerical Study of Effect of Density and Aspect Ratio on Oscillatory

Exchange Flow Through a Circular Opening in Horizontal Partition by Gera

B., Singh R. K., M Alam

582 Flow Induced Vibration Design of Heat Exchanger Tubes Subject to Cross Flow by

Gajendra Patil, M.A.Dharap, R I K Moorthy, Taufiq K.Khot

12:00-12:15231 Design of Acetone Vapour Sensor

Using Microcantilever by Chetan Kamble, M.S.Panse

962 Vibration Damping Capacity of Carbon Nanotubes Based Hybrid

Composite Spherical Shell Panel by Ashirbad Swain, Tarapada Roy

239 Numerical Modelling of Laminar Diffusion Flames Over a Hybrid Unstructured Grid by Preetirekha

Borgohain, Amaresh Dalal, Hrishikesh Gadgil, Ganesh Natarajan,

595 Dynamics of a 2D Curved Cantilever Timoshenko Beam Element Using Force

Based Finite Element Formulation by Kasun Dharmasiri, K.K. Wijesundara, A.J.

Dammika, P. B. R. Dissanayake

331 Visualization of Thermal Transport in Discretely Heated 2-D Complex Solid

Geometries by Narasimha Suri Tinnaluri, Jaya Krishna Devanuri

68 Inelastic Seismic Response of Asymmetric Buildings by Rushikesh

Raut, Suhasini N. Madhekar

12:15-12:30311 Non-Linear Finite Element Analysis of ESP Hopper by Priteshkumar Patel, Satish S. Jadhav, Ramsingh Kushwaha

968 Buckling Analysis of Composite Laminated Skew Plate of Variable

Thickness Under Biaxial Compression by Priyanka Dhurvey

245 Thermal Comfort Analysis of a Room Using Radiant Cooling System: A

CFD Based Study by Naveen Sharma, Gautam Gunjan, Murlidhar Dhakara, Mukesh Choudhary, Nikhil Gupta,

Pawan Kumar Gupta

600 Seismic Analysis of Buildings with Stiff Bottom Storeys by Omkar Pingale,

Sharad Manohar. Madhekar S.N.

339 Numerical Simulation of Natural Convection with Radiative Heat Transfer

in a Cavity by Mukul Parmananda, Salman Khan, Amaresh Dalal

163 Seismic Vulnerability Assessment of RC Frames Using Fragility Curves by

Sneha Bhende, Saurabh Pednekar

12:30-12:45

822 Acceptable External Loads on Nozzle of a Pressure Vessel by Non-

Linear Finite Element Method by Pranitha Prabhakaran, PA Jadhav

980 Prediction of Spring-In Deformation for L-Shaped CFRP Components by

Dhaval Shah, Kaushik Patel, Shashikant Joshi, Lav Kaushik

250 Study of Natural Convection in a Wavy Porous Enclosure in Presence of Magnetic Field by Chitralekha Sarkar, Swapan Kumar Pandit, Durga Charan

Dalal

612 Influence of the Poisons Ratio on the Eigen Values of PZT Discs for Uniaxially

Loaded Energy Harvesters by K Viswanath Allamraju, K. Srikanth

345 Lbm Simulation of Free Convection in an Enclosure Containing Heat Generating

Low-Pr Fluid by Gera B., Singh R.K.

294 Impact Test on Reinforced Concrete Slabs by R M Parmar, Tarvinder Singh,

G R Reddy

12:45-13:00226 Comparative Study of Outrigger Structural System by Jugal Senghani,

Pooja Mistry

992 A Method for Accurate Transverse Normal Stress Evaluation in Laminated

Composites Using Simple HSDT by Mahesh Balasaheb Deshmukh, Bhar A.

253 Vortex Structure of Incompressible Viscous Flows in a Lid (S) Driven Cavity with Wavy Wall by Hemanta Karmakar,

Swapan K. Pandit

672 Enhancing Suspension Behavior Using Design of Experiments by Anirban Mitra,

Kiranchand G R, Snehal B Dhakare, Mukul S Jawarkar

403 Natural Convection in an Open Cavity with Surface Mounted Electronic

Components by M Gavara, S. Muthukrishna

394 Geometric Nonlinear Analysis of Cable Domes by Sudarshan Krishnan

13:00-13:15

276 Study on Analysis of RC Slabs Under Concentrated Loading by Daxesh

Katrodiya, Neha Chauhan, Ritesh L Chauhan

1206 Stochastic Natural Frequency of Composite Plates Using Kriging Model by Sudip Dey, Tanmoy Mukhopadhay, Souvik Chakrabarty, Rajib Chowdhury,

Sondipon Adhikari, Amit Karmakar, Spickenheuer A.

266 Optimization of Simple Air Duct Heat Exchanger by Perforated Plates

Using Multi-Objective Genetic Algorithm: An Experimental And CFD Based Study by Shubham Mittal, Vineet

Sharma, Sheetal Kumar Jain, Vikas Sharma, Manish Dadhich, Arun Kumar

Jangid

715 Application of Energy Harvester for Controlling the Propeller Induced Vibration

and Generating the Electricity by K Viswanath Allamraju, K. Srikanth

525 Numerical Analysis offlow Boiling Heat Transfer in Single Horizontal Small Diameter Channel Using VOF Multiphase Model by Jignesh Rohit, Krishna Kumar

409 Numerical Analysis of Scaled Containment Model by Parthesh Parekh, R. K. Singh, G. R. Reddy, Parmar R.M.

13:15-13:30

441 Meshfree Analysis of Cracked Panel Repaired by Bonded Composite Patch by

Akhilendra Singh, Himanshu Pathak, Indra Vir Singh

942 Analysis of Laminated Composite Orthotropic Plates Underbi-Directional

Bending Subjected to Concentrated Loads by Deepa Raval, Abhay Bambole

280 ADPI Calculation for Thermal Comfort in Operation Theatre with

Angular Diffuser by Swati Rahate, Swati Devidas Rahate, Sainath Arjun

Waghmare, Prashant Deshmukh

784 Smart Base-Isolation Using Fuzzy Control by Megha Lakhani, Devesh P. Soni

856 Numerical Study on Convective Mass Transfer Enhancement by Baroclinic

Torque Induced Vortex by Aravind G P, K. M. Muhammed Rafi, Fahd Bin Abdul

Hasis, M. Deepu

13:30-14:30 Lunch

Keynote LectureClean Water and Clean Energy Production: simulation Using Finite Element Method

by K.N. Seetharamu, Spandana K.R., Parikshit

Keynote LectureTwo-Temperature Continuum Model for

Metal Plasticity by Debasish Roy, Chowdhury S, R.


Plenary Session – 3: Parallel Partitioned Simulations of Real World’s Coupled Problems by Prof.Yoshimra Shinobu at Prof. B. Nag Auditorium, VMCCPlenary Session – 2: Multiscale Modeling of Failure in Composite Materials by Prof. Ramesh Talreja at Prof. B. Nag Auditorium, VMCC

Break-fastProgram Details (Wednesday, 29 June, 2016) [Forenoon Session]

Tea Break

Page 6









Theme Solid and Stuctural Mechanics Micro and Nano Mechanics Computational Fluid Dynamics Dynamics Novel Computational Technique Non-Linear MechanicsChairperson Vasant Matsagar Vijay Gupta T I Eldho R S Jangid Ranjan Ganguli L S Ramchandra

14:30-14:45

368 Free Vibration Finite Element Analysis of a Circular Cylindrical Shell by Aruna Rawat, Vasant Matsagar, A K

Nagpal

283 CFD Simulation of Combined Buoyancy and Pressure Driven Hot Gas Flows Through Square Opening Using

Salt Water Analogy by Gera B., Singh R. K., M Alam

808 Evaluate the Performance of Quarter Car Suspension System with Nonlinear

Hysteresis Magnetrheological Damper by Hemanth K, Lohit S K, Hemantha Kumar,

K. V. Gangadharan

14:45-15:00

300 Large Deformation Analysis of Point Supported Conoidal Shells Using Element Free Galerkin Method by

Pradyumna S, Gauraw Watts, Maloy K Singha

288 Computational Study of Hypersonic Flow Past a Spherically Blunted Nose

Cone by Ashish Narayan, Rakesh Kumar, S.Narayanan

903 Vibretional Analysis and Detection Crack Parameter in Clamped-Clamped Beam Using Cascade Artificial Neural

Network by Amit Banerjee, Goutam Pohit

15:00-15:15

330 B-Spline Wavelet Finite Element Method for 1D Bi-Material Problems in Elasto-Statics by Shashank Vadlamani,

Arun C.O.

326 Buckling of Nanobeams Using Different Nonlocal Continuum Theories

by Bishweshwar Babu, Badri Prasad Patel

292 Energy Deposition in Supersonic Flow Past a Hemisphere Using Openfoam by Shesh Narayan

Dhurandhar, Ankit Bansal

910 Structural Identification on Beam Structures Using Okid/Er Algorithm by

Jesu Jacob, P.Nandakumar

115 An Improved Approximation Strategy for Multi Objective Evolutionary

Optimization by Tanmoy Chatterjee, Rajib Chowdhury

422 Effect of Circular Web Perforation in Rectangular Lean Duplex Stainless Steel (Ldss) Tubular Beams – A Finite

Element Study by Sonu J.K, Konjengbam Darunkumar Singh

15:15-15:30

293 Experimental Investigation of Hollow Stainless Steel Square Stub

Column with Single Perforation Under Axial Compression by Sanasam Vipej Devi, Konjengbam Darunkumar Singh

341 Size Dependence in Mechanical Behaviour of Polystyrene Micropillars Under Compression by Guruprasad T, Shantanu Bhattacharya, Sumit Basu

309 Assessment of Pulsatile Waveforms on the Blood Flow Dynamics in

Intracranial Aneurysm by Mantulal Basumatary, Ganesh Natarajan, Subhash

C. Mishra

969 Fault Diagnosis of Anti Friction Bearing Using Daubechies Wavelet by

Sangram Patil, Phalle Vikas M.

208 Stability Preserving Runge Kutta Method Using Genetic Algorithm by Arun

Govind Neelan,Manoj T Nair

447 Structural Performance of Elliptical Hollow Steel Tubular Braces Under Ultra Low Cycle Fatigue Loading by

Narendra Perumalla V R, Konjengbam Darunkumar Singh

15:30-15:45

457 Layerwise Solution for Nonlinear Static and Dynamic Stability of

Laminated Composite Plates Using B-Spline Finite Element Method by

Susmita Mondal, L S Ramachandra

728 Evaluating Thin Film Mechanical Properties Applying Nanoindentation:

Computational, Experimental and Analytical Study by Mallikarjunachari G,

Pijush Ghosh

334 Flow Modelling Around an Amphibian Aircraft Using Openfoam by

Kamlesh Joshi,Ankit Bansal

987 Effect of Centre Distance Variation on Performance of Spur Gear by Vasim

Sayyad, Sangram S. Patil, Vishwadeep C. H, Phalle Vikas M

237 A Refined Time Series Model for Structural Health Monitoring by Lakshmi

K.A. Rama Mohan Rao

454 A Comparative Study on Effect Fibre Volume Fraction on Ex-Situ Bmg

Composites Through Unit Cell Simulations by Gouripriya S, Sakshi Ajit

Sinha, Parag Tandaiya

15:45-16:00

462 Strength of Fixed Ended Circular, Square, and Flat Oval Hollow LDSS

Slender Columns Under Axial Compression by Khwairakpam

Sachidananda, Konjengbam Darunkumar Singh

534 Length Scale Effect on the Deformation Behaviour of Bio-Inspired

Nanocomposites Using Molecular Dynamics by Mathiazhagan S., Anup S.

335 Numerical Study on Effect of Airfoil Pin-Fin Location in Tube Fin Heat

Exchanger by Jaganathan A, Deepakkumar R, Jayavel S.

1048 Response of an Elastic Plate with a Constrained Interior Point Under the Effect

of Grazing Sound by Swapnil Sapkale, Mahesh M.S, Gupta S.

238 A Novel Technique for Solving Three Dinemsional Problems by P.V. Ramana

488 Finite Element Analysis of Plain Cement Concrete by Akshay Joshi,Pratik

S. Gujar,Sandeep S. Pendhari

16:00-16:15

475 Effect of Cross-Sectional Shape on Compressive Strength of LDSS Stub Columns by Tekcham Gishan Singh,

Jackie Brahma, Konjengbam Darunkumar Singh

636 Dispersion Properties of Linear Microelastic Peridynamic Bar by

Venkata Mutnuri, S. Gopalakrishnan

355 A Sharp Interface Immersed Boundary Method for Inviscid

Compressible Flows by Shuvayan Brahmachary, Ganesh Natarajan,

Vinayak Kulkarni, Niranjan Sahoo

999 Free Vibration Analysis of a Simply Supported Beam by Kamble S. D.,

Shindade A., Salokhe N.

252 Computational Mechanism on Large Deformable Bodies Using Novel

Technique by P.V. Ramana

498 Estimation of Local Stresses and Strains for Notched Geometries Using

Non-Linear Analysis by Vinayak H Khatawate, M.A.Dharap, R.I.K.Moorthy

16:15-16:30

691 Non Local Analysis of Laminated Plates using Third Order Shear

Deformation Theory Considering Surface Stress Effects BY Piska Raghu,

A Rajagopal

391 Lattice Boltzmann Simulation of Mixed Convection Around a Heated

Square Cylinder Placed in a Lid Driven Cavity by Gera B., Singh R. K.

261 A Review on Applications of Meshless Methods to Flow and Transport Processes in Porous Media by Boddula S.,

Eldho T I

16:30-16:45 Tea Break

Keynote Lecture Physics Based Finite Element Interpolation Functions for Rotating Beams by Ranjan

Ganguli

Keynote LectureMicrostructure Evolution in Metal

Nanostructures Under Extreme Conditions of Temperature and Strain Rate by Vijay Gupta, Ghoniem NM,

Crum R, PO G, Seif D, Prikhodko SV ,Colorado HA, Ramirez B, Gámez C

Keynote LectureNonlinear Stability Characteristics of

Composite Cylindrical Panel Subjected to Non-uniform In-plane Mechanical

and Localized Thermal Loadings by L. S. Ramchandra,Banerjee B.

Program Details (Wednesday, 29 June, 2016) [Afternoon Session]

Plenary Talk: 45 minutes each (3 mins intro + 35 mins talk + 7 mins Q/A) Keynote Lecture: 30 minutes each (2 mins intro + 25 mins talk + 3 mins Q/A) Paper Presentaion: 15 minutes each (1 min intro + 12 mins talk + 2 mins Q/A)All venues are at VMCC, IIT Bombay, Powai, Mumbai 400076

Page 7









Theme Solid and Stuctural Mechanics Heat Transfer Computational Fluid Dynamics Dynamics Novel Computational Technique Non-Linear MechanicsChairperson Sandeep Pendhari G R Reddy T I Eldho Sauvik Banerjee Ram Mohan R Narasimhan

16:45-17:00

557 Effect of Damping on the Dynamic Response of a Beam with Non-Ideal

Boundary Supports by S.K. Panigrahi, Mahapatra K.K., Gaur A.

493 Condensation Heat Transfer in Helical Coil by Rashed Ali, N P

Gulhane, Anil Kanase, Prashant Date

406 An Immersed Boundary Method for Mixed Convection Flows with Large Temperature Gradient by Kumar M.,

Ganesh Natarajan

869 Dynamic Modeling & Simulation of Dual Clutch Transmission with

Mechatronics Unit by Rahul Deotarey

17:00-17:15

562 Retrofitting and Rehabilitation of Elevated Water Tank After Investigation

of Corrosion Status by Using Nondestructive Techniques by

Chittaranjan Birabar Nayak, Sunil B Thakare

881 Thermohydraulic Study of V - Corrugated Heat Exchanger by Pooja Dutta, Ashutosh Das, Partha Pratim

Dutta

518 Genuinely Multidimensional Cure for Numerical Shock Instability in a

Contact Preserving Riemann Solver by Sangeeth Simon Chirayath Puthur, J. C.

Mandal

892 Seismic Risk and Loss Assessment of Open Ground Storey RC Structures by

Gautham A, K. Gopikrishna

17:15-17:30

579 Validation of Theoretical Stress Concentration Factor for Varying

Notched Geometries Using FEA by Khatawate V.H., M.A. Dharap,

R.I.K.Moorthy

901 Numerical Analysis of Natural Convection Around a Pair of Heated

Cylinders Inside a Cold Square Enclosure by Satendra Pal Chauhan, H C

Thakur

553 Numerical Simulation of Lid-Driven Square Cavity Using Staggered Grid

Based Finite Volume Method by Indukuri Jagadeesh Varma, Ranjith

Maniyeri, Sangmo Kang

883 Analysis of Natural Frequencies and Loss Factors in Sandwich Composite Plates

with Magnetorheological or Electrorheological Elastomer Core by Nagendra Gopal K. V., Pooja Sharma,

Mohit Garg

487 A Computer Numerical Simulation Study Between System Level and

Component Level Model of a System Under Design by Hariram

Shanmuganathan

533 Frictional Hysteresis in an Elastic Body with Microcracks by Saurabh

Biswas, Prasun Jana, Anindya Chatterjee

17:30-17:45

596 Force Based Linear Static Analysis of 2-D Curved Tapered Timoshenko

Beam Elements by Chathura Rajapakse, K. K. Wijesundara, P. B. R. Dissanayake

978 Parametric Investigation of Performance of Portal Frame At Elevated Temperature by Sharma S., Pratik Bhatt, Tarvinder Singh, Vasant Matsagarr, G.R.

Reddy

833 Numerical Investigation of Flow Through Steam Turbines Using the

Mixing Plane Method by Shrish Shukla, Rishi Mishra, Nikhil Chaudhary, Sawan

Suman

907 Base Excited Random Vibration Analysis of Thin Shells by D.Rama

Krishna, J.V.Subrahmanyam

407 Fatigue Analysis of ABS Mould by Addanki Sambasiva Rao, M A Dharap, Jvl

Venkatesh

538 Analysis of a Nonlinear Flexural Wave-Breathing Crack Interaction in A Slender Beam Using Wavelet Spectral Finite Element Method by Dhanashri

Joglekar,Mira Mitra

17:45-18:00

184 Moment-Rotation Behavior of Stainless Steel Beam-Column Bolted Connection by Vinay Bhavsar, B. M.

Dawari

1083 Thermal Design and Analyses of Lithium-Ion Battery for Rover of an

Interplanetary Missions by Jayaraman S., Amaresh C., Bindagi S.V., Srinivasan M.S., Satyanarayana, R. Ravindranan,

Barve S.G., Sahrma A.K.

860 Steady Flow Computations Using Hll-CPs Scheme with Low Mach

Number Correction by Aishwarjya Gogoi, Mandal J.C.

365 Identification of Crack Advancement in Gearbox by Application of Entropy

Measures on Acoustic Emission Signalby Ram Bihari Sharma, Anand Parey

975 Multi-Block Structured Grid Generation using Algebraic Techniques for

Complex Rocket Models by C. Unnikrishnan

811 Buckling Behaviour of Inelastic Castellated Beam by Baskar

Kaliyamoorthy, Aarthy E, Cyril Thomas A

18:00-18:15

450 Probabilistic Flutter Analysis: A Perturbation Approach by Sandeep

Kumar, Amit Kumar Onkar, Manjuprasad M.

602 Numerical Investigation of NACA 0025 and NACA 0021 of straight blade

Darrieus turbine for Hydrodynamic Application by Hitesh Thakare, Bhushan

Patil, Krishna Kumar

1281 Comparative Study of Metallic and Composite Belly for Belly Landing of a

Light by Akshatha H T, Praveen Banakar

18:15-18:30

Program Details (Wednesday, 29 June, 2016) [Afternoon Session]


Key note Lecture An Overview of Computational Modeling at Material Chemistry and Micro Scales in

Cement Paste by Ram Mohan

Key note LectureFinite element simulations of void

growth and coalescence inductile single crystals

by R. Narasimhan

Page 8


08:30 – 09:3009:30 – 10:1510:15 – 11:0011:00 – 11:30








Theme Solid and Stuctural Mechanics Multi-scale modelling Computational Fluid Dynamics Multi-physics problem / Multi Phase flow Novel Computational Technique Smart Structures

Chairperson G R Reddy Abhay Bambole T I Eldho Ney Augusto Dumont Arun K Saha Santosh Kapuria

11:30-11:45

843 Simplified Approach for Seismic Analysis of Base Isolated Multi-Storeyed

Structure by Nagender T, Parulekar Y.M., G.R.Reddy

259 Mechanical Properties of Concrete Exposed to Burning by P. V. Ramana, Kunal Bisht, Dinesh Pathak, Rishabh

Gupta

877 Investigation of 3-D Flows in a Tandem Compressor Cascade with Various Chord Ratios by Shine S R,

Sherin S B, Manas M S

62 Dynamic Response of an Asymptotically Correct Piezoelectric Sensor with a Tip Mass

by Shreya Banerjee, Sitikantha Roy

11:45-12:00

761 Growth of Yield Front in Statically Indeterminate Bar by Using Domain Decomposition Method by Nayak P.,

Kashi Nath Saha,

262 The Waste Materials as Partial Replacement of Fine Aggregate in Concrete-Outlet by P. V. Ramana,

Manish M, Kunal Bisht

887 Prediction of Flow Parameters for a Flow Past Rows of Staggered Cylinders Using Artificial Intelligence Methods by

Udayan Singh, Naushita Sharma

120 Notch-Type Damage Detection in Plate Structures Using a Refined Time-Reversed

Lamb Wave Method by Jitendra Kumar Agrahari, Santosh Kapuria

12:00-12:15844 Free Vibration Analysis of Isotropic Skew Plate by Mohd Abrar Abdul Alim,

Basudeb Bhattacharyya

303 Molecular Mechanisms in Self-Folding Behaviour of Hydrogel

Nanocomposite by Santhosh Mathesan, Amrita Rath, Pijush Ghosh

906 Effect of Corrugation Geometry on Power Consumption and Friction Factor

in a Channel by Bharath Ram R, Sudharsan T S, Naren P R

468 Finite Element Simulation of PZT Induced Guided Wave Modes in

Isotropic Cylindrical Shells by Jayesh P, C R Bijudas

277 TThe Equality of Partial Solutions for Nth Order Differential Equations

Using Novel Technique by P. V. Ramana, Shailesh Gupta

148 FE Modeling of Sandwich Beam with Two-Plane Edge Debonding of Piezoelectric Shear Actuator by K. Venkata Rao, S Raja, T

Munikenche Gowda

12:15-12:30864 Large Deflection Analysis of Leaf Spring Under Three Point Bending by

Sushanta Ghuku, Kashi Nath Saha

566 An Efficient Locking Free Multiscale Finite Elements for Free

Vibration Analysis of Carbon Nanotubes by Sandeep Singh, B. P. Patel

917 Numerical Study of Flow Distribution in a Parallel Channel

Manifold by R Aswin, K R Shravan Raaghav, P R Naren

214 Numerical Study of Effects of Particle Diameter and Particle Volume

Fractions on Dispersed Gas-Particle Flows Through Vertical Channels by

Subrat Kotoky, Amaresh Dalal, Ganesh Natarajan

554 Novel Algorithms for Simulation of Free and Moving Boundary Problems by

Ramsharan Rangarajan

181 Critical Buckling Analysis of Spherical Shells by Dimple Desai, Neha Chauhan, G.

S. Doiphode

12:30-12:45870 Linear Static Analysis of a Structural

Member by Finite Element Method by Swapnil Bandgar, S. D. Kshirsagar

570 Displacement Analysis of a Compliant Micro-Gripper Using PRBM

& FEA Method by Prasad Darawade, Prasad B. Darawade, Mayur P. Shendge, Ameya S. Deshmukh, Siddhant S. Jain,

Rushikesh S. Joshi,Anirban Mitra

957 Heat Transfer Augmentation of Helixchanger Using CFD by Madhukar

Tandale, Manjunath C B, Raje N.

234 CFD Modelling of Gas Bubble Formation in a Stagnant & Co-Flowing Liquid Medium by Dipankar Chatterjee,

Vijay Kumar Prasad, Satya Prakash Singh

668 Optimization of Shell and Tube Heat Exchangers by Minimizing the Entropy

Generation Using Bat Algorithm by Tharakeshwar T.K, K.N. Seetharamu,

B.Durga Prasad, Bharath Kumar

212 Impact of Irregularity on the Propagation Behavior of Surface Wave in a Layered Piezoelectric Structure by Santan

Kumar, Abhishek Kumar Singh, Shruti Mahto

12:45-13:00

876 Crashworthiness and Multiobjective Optimization of Axially Loaded

Aluminium Elliptical Tapered Hollow Sections by Anirudh Narayanan, Sharad

Rawat, A. K. Upadhyay

642 Adaptive Multiscale Finite Element Method for Simulation of Heterogeneous Material by Roshan Patil, Bhanu Kumar

Mishra, Indra Vir Singh

964 Numerical Investigation of Evolving Flow Structure Around Ahmed Body

Mounted with Solar Panel of Different Configuration by Mohammad Rafiq

Agrewale, R S Maurya

256 The Role of Consistency in the Simulation of High Density Ratio Flows

by Jitendra Patel, Ganesh Natarajan

841 Computational Performance of Isogeometric Analysis in Exterior

Acoustics Using Perfectly Matched Layer by M Dinachandra, Raju

Sethuraman

544 Magnetically Coupled Broad Band Piezoelectric Energy Harvester by Pradeep Malaji, Pradeep V Malaji, Shaikh Faruque

Ali

13:00-13:15

1127 Semi-Analytical Solutions for Functionally Graded Smart Plate In

Cylindrical Bending by Sameer Sawarkar, Sandeep Pendhari, Yogesh

Desai

1090 CFD Analysis of Perfusion Kinetics in Brain Tumor with DCE-MRI

Derived Model by Niraj Sinha,Ajay Bhandari, Niraj Sinha, Ankit Bansal,

Anup Singh

289 Three-Dimensional Deformation of a Droplet on a Square Duct Wall

Considering Wetting Effects by Saurabh Bhardwaj, Amaresh Dalal

846 A Study on the Behaviour of the Basis Functions in Differential

Quadrature Method for Elasto-Static Problems by S.S. Durga Rao, Raju

Sethuraman

601 Finite Element Analysis of a Piezoelectric Plate Based on First Order

Shear Deformation Theory by Surendranath Jadhav, Patil Vishal, Sandeep S. Pendhari

13:15-13:30

719 Numerical Simulation on Performnace Evaluation of Chemical Anchors Embedded in Concrete by

Saptarshi Sasmal, K.H. Lieberum, E.A.B. Koenders

1173 CFD Simulation of Cascade Fin Flow at Low Subsonic Speeds and High

Angles of Attack by Manish Tripathi, Mahesh M.S., Ajay Misra,

426 Analysis of Droplet Solidification During Fci in Severe Accident of

Nuclear Reactors by Brindaban Ghosh, Mukhopadhyay D.

141 Sequential Experimental Design Based Uncertainty Quantification by

Biswarup Bhattacharyya, Sonalisa Ray

646 Behaviour of Polypropylene Fibre Reinforced Concrete Pavement Under Static

Wheel Load by Milind Mohod, Kshitija N.Kadam

13:30-14:30

Program Details (Thursday, 30 June, 2016) [Forenoon Session]

Plenary Talk: 45 minutes each (3 mins intro + 35 mins talk + 7 mins Q/A) Keynote Lecture: 30 minutes each (2 mins intro + 25 mins talk + 3 mins Q/A) Paper Presentation: 15 minutes each (1 min intro + 12 mins talk + 2 mins Q/A)Lunch

Keynote Lecture Effect af Spanwise Shear on Flow Past a

Finite-Length Square Cylinder at Low Reynolds Number by Arun K Saha

Keynote Lecture A Fast-Multipole Unified Technique for the Analysis of Potential Problems with the Boundary Element Methods by Ney

Augusto Dumont, Hélvio De Farias Costa Peixoto

Tea BreakPlenary Session – 5: Systemic Circulation Models for Studying Clinically Relevant Flow Problems by Prof. P. Nithiarasu at Prof. B. Nag Auditorium, VMCC

Plenary Session – 4: St Venant Torsion and Bending of Prismatic Composite Shafts by Prof. B. L. Karihaloo at Prof. B. Nag Auditorium, VMCCBreak-fast

All venues are at VMCC, IIT Bombay, Powai, Mumbai 400076

Page 9









Theme Material Modelling Porous Media Mechanics Geo Mechanics Multi-Physics Problem / Multi Phass flow Transient dynamic problems Non-Linear Mechanics

Chairperson Deepankar Choudhury Anupam Dewan Abhay Bambole Ramana Grandhi R S Jangid Sandeep Pendhari

14:30-14:45

564 FE Based Investigation of Heat Effected Zone and Temperature

Distribution in Copper and AISI 304 Stainless Steel Weldment by Gurdeep

Singh, Saxena R.K., Sunil Pandey

218 Effects of Intermediate Principal Stress on Shear Localization During

Tunnel Excavation by Arghya Das, Mitul Sisodiya

139 Incremental Dynamic Analysis of RC Building Frames by Kedar

Sabharanjak, Balkrishna M. Dawari

812 Non- Linear Behaviour of Laterally Restrained Beams with Sinusoidal Corrugated Web by Sadananda H.I.

14:45-15:00

656 Mechanical Behaviour of Epoxy Matrix Under Tension, Compression

And Shear Using Dic: Experiments And Numerical Modeling by Mohit Gupta,

Puneet Mahajan

306 A Numerical Study on a Rock Slope Failure with the Rate, State, Temperature

and Pore Pressure Friction (RSTPF) Model by Arun K. Singh, Trilok N Singh

392 Inverse Problem on a Timoshenko Beam Using Time Domain Spectral

Finite Element Method by Raghavendra B Kulkarni, S Gopalakrishnan, Manish

Trikha

831 Non-Linear Behaviour of Girders with Horizontal Web Splice by Baskar K., Ruturaj

Sawant

15:00-15:15

825 Study of Agglomerate Breakage in A Shear Flow Using Numerical

Simulations by Narendra Akiti, Karen Hapgood, Devang Khakhar

269 Heat Transfer Enhancement of Heat Exchanger Using Porous Medium: A CFD Based Study by Vineet Sharma,

Shubham Mittal, Naveen Kumar Sharma, Sheetal Kumar Jain, Vikas Sharma,

Manish Dadhich

434 Redistribution Principle Approach for Evaluation of Seismic Active Earth

Pressure Behind Retaining Wall by Amol Maskar, S.N.Madhekar, D.R.Phatak

547 Numerical Analysis of Micromixer with Flow Disturbing Ribs by

Srikarthikeyan, Krishnah S, Arunkumar S, Venkatesan M.

415 Study of Thermal Behaviour of Brake Disc Materials by Deepak Panda,

Mallina Venkata Timmaraju

832 Non-Linear Analysis of Castellated Beams by Baskar K., Shobana R, Cyril

Thomas A

15:15-15:30

902 Prediction of Compressive Strength of Concrete with Natural Aggregates and Recycled Aggregates Using M5’ Model Tree Algorithm by Sudhirkumar Barai,

Sarthak Jain

448 Simulation of Advective-Dispersive Transport in a Porous Medium Using the Operator Splitting Technique by Tinesh

Pathania

638 Effect of Soil Structure Interaction on Vertical Irregularity in Framed RC

Structure by Gaurav Dhadse, Milind V. Mohod

687 A Multi-Phase Closed Pipelines Simulation Approach for Transportation of Heavy Oil with Openfoam In Hpc by

Alomoy Banerjee, Barman S.

874 Inspection of Adhesively Bonded Lap Joints Using Spectral Finite Element

Method by Shweta Paunikar, S Gopalakrishnan

1067 Nonlinear Computational Analysis of Multi Strand Helical Wire Rope Isolators by

Nilesh Patel, A Kumaraswamy

15:30-15:45920 Evaluation of Expanded Polystyrene (EPS) Geofoam Creep Using Plaxis 3D

by Yebeltal Beju ,J.N.Mandal

946 Design and Development of Energy Efficient Cold Storage Interior Using Computational Techniques by Rohit

Maradkar, R S Maurya

862 Numerical Modeling of Reinforced Copper Slag Embankment Using Plaxis 3D by Athulya G.K., Manas Choubey,

J.N Mandal

884 Numerical Heat Transfer Analysis of Pin Fin with Ellipsoidal Beads by

Madhumitha Ravichandran, Arunkumar, Balachandar C, Venkatesan Muniyandi

1258 Energy Harvesting from Oriented Piezoelectric Beam by Anshul Garg, S. K.

Dwivedy

15:45-16:00

1034 Simulation of Soil Subjected to Underground Blast Using Flac3D by

Ranjan Kumar, Deepankar Choudhury, Kapilesh Bhargava

798 Flow of Grains Through an Orifice in a Rectangular Silo by Ashish Bhateja,

Devang Khakhar

540 Three Dimensional Computer Simulation of Laterally Loaded

Monopile Foundation for Offshore Wind Turbine by Rohan Deshmukh,

V.K.Sharma

934 Topology Optimization of Pre-Mixing Zone in a T Shaped Micromixer for Enhanced Mixing by Madhumitha

Ravichandran, Arunkumar, Balachandar C, Venkatesan Muniyandi

16:00-16:15

776 Characterization of Flow and Thermal Behaviour of Product Gas

Constituents in the Throat-Less Downdraft Gasifier by Aniruddha Kane,

R.S. Maurya, Indresh Tiwari, Sydney Lobo

995 Evaluation of Soil Deformation Modulus by Jaydeep Wagh, Parth Joshi,

Abhay Bambole

997 Comparative Study of Coal Combustion In Air And O2/CO2

Environment by Rajneesh Vachaspati, Om Prakash Singh, Ray T.K.

16:15-16:301472 Effect of Field Parameters on

Saltwater Ingression in Coastal Aquifers by Ukrande S.K., Sonawane S.B.

16:30-16:45Plenary Talk: 45 minutes each (3 mins intro + 35 mins talk + 7 mins Q/A) Keynote Lecture: 30 minutes each (2 mins intro + 25 mins talk + 3 mins Q/A) Paper Presentation: 15 minutes each (1 min intro + 12 mins talk + 2 mins Q/A)


Program Details (Thursday, 30 June, 2016) [Afternoon Session]

Keynote Lecture Solidification with Buoyancy Induced Convection: Evaluation of Different

Mushy Zone formulations by Anupam Dewan

Keynote Lecture Multi-fidelity Design Optimization:

Challenges in Complex Physics-based Computational Mechanics by Ramana

Grandhi

Tea Break

Page 10


08:30 – 09:30Session ID S-49 S-50 S-51 S-52 S-53






theme Solid and Stuctural Mechanics Composite Structures Computational Fluid Dynamics Fracture and Damage Mechanics Bio MechanicsChairperson D K Maiti Sauvik Banerjee T I Eldho P Seshu Y M Desai

09:30-09:45

192 Fragility Based Seismic Vulnerability Assessment of Reinforced Concrete Framed

Structures by Veerendra Kumar, M. V. N. Siva Kumar

486 Static Analysis of Functionally Graded Beam for Power-Law Variation of Elastic Modulus by Sandeep

Pendhari, Pratik Gujar, Mihir Mahajan, Pankaj Dhangare

156 Cost Effective CFD Methodology to Predict the Free Surface Movement Inside Tank by Sakthivel

Periyasamy, Gopal Shinde, Aniruddha Joshi, Kishor Nikam

586 Influence of Notch to Depth Ratio on Fracture Process Parameters of Plain Concrete Beam Using

Concrete Damaged Plasticity Model by Jobin George, Kalyana Ram J S, Ramachandra Murthy A, Siva

Kumar M.V.N., Vasan A.

88 Vibrational Characteristics of Femur Bone by Priyadarshi B.K., Parhi D.R.

09:45-10:00224 On Plane Strain Problems of Eccentric Elastic

Rings in Bipolar Coordinate Systems by Payal Desai, Visaj Pandya

1172 Non-Linear 3D Finite Element Analysis of Adhesively Bonded CFRP Lap Joint by Lavajiit Singh,

Mahesh M S, Sunil Nimje

506 A Study on River Bed Degradation Due to Mining of Coarser Top Sediment Layer by Bandita Barman,

Arup Kumar Sarma

591 Damage Development During Single Fiber Fragmentation by Suhasini Gururaja, Nithin K

Parambil

102 Analysis of Implants Used for Stabilization of Fractured Bone by Amiya Kumar Dash, Deepak Kumar Agarwalla,

Harish Chandra Das, Jagannath Sahoo, Asit Rath

10:00-10:15 248 Structural Analysis Using Affine Arithmetic by Ch Raveendra Babu, N Ajay Kumar, Balu A. S.

1060 Tensile and Compressive Buckling Analyses of Stiffened Laminated Composite Panels by T. Rajanna,

Sauvik Banerjee, Yogesh Desai, Prabhakara D.L.

647 Two Phase Interface Model for Transport Phenomena During Sublimation of Crystals and Vapor Phase Reaction by Ruturaj Sawant, Satish Inamdar, I.

A. Karimi, B. D. Kulkarni

609 Analysis of Fatigue Crack Propagation in Plate Girder by Rasbihari Basughosh Das, Bhairav Thakkar

175 Influence of Drilling Effect on Bone Stresses by Finite Element Analysis by Archana Mahajan, Kshitija Kadam

10:15-10:30249 Buckling Analysis of Functionally Graded Plates Using Inverse Hyperbolic Shear Deformation Theory

by Kamlesh Kulkarni, B. N. Singh, D. K. Maiti

1123 Stress and Failure Analysis of Functionally Graded Adhesively Bonded Tubular Socket Joint by Nimje S.V.,

Panigrahi S.K.

775 Water-Gas Two Phase Flow Characteristics in Horizontal Pipeline-A CFD Study by Santosh Senapati,

Satish Kumar Dewangan

622 Analysis of Crack Propagation in a Welded Lap Joints by Yameen Patel, Bhairav Thakkar

361 Effects of Heat and Mass Transfer on MHD Flow of Blood Through an Artery with Stenosis Having Variable

Viscosity by Bhavya Tripathi, Bhupendra Kumar Sharma,

10:30-10:45251 Evaluation of Coupled Partial Models Using Graph Theory and Sensitivity Analysis by Balu

A.S., ,Anil Naik

706 Inverse Dynamic Analysis of Axial Piston Pump Using Augmented Newton-Euler Formulation by Milind

T. R., Mitra M.

971 Investigation of Acceleration Effects on Rocket Aerodynamics by Kumaravel Gnanashanmugam,

Ethirajan Rathakrishnan

634 Analysis of Crack Propagation in a Plate Girder by Riyakumari Patel, Bhairav Thakkar

512 A Novel Computer Model for Bone’S Adaptation to Mechanical Environment by Ajay Goyal, Jitendra Prasad

10:45-11:00 258 Damage Detection of Structures Using Wavelet Analysis by Balu A.S.,Pedapudi Srinivas

707 Numerical Rigid and Flexible Multibody Dynamic Modeling of an Axial Piston Pump: Validation,

Comparison and Parametric Studies by Milind T. R., Mitra M.

930 Experimental and Numerical Study on Wake Evacuation Effects in Expansion Deflection Nozzles by

Kiran Mohan,Vishak Sashidharan, Prabal Munjal, Aravind Vaidyanathan

649 Failure Assesment in Aluminium Plate Using Continuum Damage Mechanics by Salman Nawab,

Bhairav K Thakkar

745 Fabric Based Characterization of Microstructural Anisotropy of Trabecular Bone by Singh A.K., Srivastava

P.K., Mahajan P.

11:00-11:15

274 Adaptive Refinement Stratergy for Crack Propagation Analysis Using EFG Method by

Bhavana S. S. Patel, Babu K. S. Narayan, Katta Venkataramana

708 Boundary Element Modeling of the Acoustic Radiation of an Axial Piston Pump: Numerical

Implementation by Milind T. R., Mitra M.

939 Numerical studies of a shell-and-tube PCM based heat storage unit by Prokash Roy

652 Effect of Flexural Cracks on Behaviour of RCC Beams Under Torsion by Mahesh Bariya, Bhairav K

Thakkar

802 Analysis of Internal Fixation Plates by Tanweer Alam, Nagendra Babu, Pawan Kumar

11:15-11:30 967 Expert System for Bridge Truss Design by Bambole A. N., Murgudkar H. C., Pravin Thakur

709 Numerical Modeling of the Structural Acoustic Radiation and Sound Pressure Fields of an Axial Piston

Pump by Milind T. R., Mitra M.

1023 Aerodynamic Analysis of Corrugated Winglet for Improved Mav Performance by Yagya Dutta Dwivedi,

D Jagadish

790 Numerical Simulation of SPT Data Using GTN Material Damage Model to Evaluate J-R Curve by Pradeep Kumar, B.K.Dutta, J.Chattopadhyay, R.S.

Shriwastaw

889 A Study on Accidental Injury & Human Biomechanics in Bangladesh : An Approach to Reduce Accidental Injury & Increase Health Safety by Rafiur Rahman Khan Taim,

Muhtadi Munawar Zahin

11:30-11:45 Tea

Program Details (Friday, 01 July, 2016) [Forenoon Session]Break-fast


Page 11


Session ID S-54 S-55 S-56 S-57 S-58






theme Solid and Stuctural Mechanics Smart Structures Computational Fluid Dynamics Fracture and Damage Mechanics Novel Computational TechniqueChairperson Y M Desai Sandeep Pendhari T I Eldho G R Reddy Abhay Bambole

11:45-12:00

479 Static and Free Vibration Analysis of Functionally Graded Plates: Mechanical, Thermal And Hygrothermal Loading by Monica Dhinde,

Yogesh M. Desai

733 Accurate Modelling of Shear Monomorph Sensors by Raveendranath P, Litesh N. Sulbhewar

1157 Flood Plain Simulation of an Urban River Catchment: A Case Study by Purushottam Zope, Eldho

T. I., V. Jothiprakash

908 Study of Various Damage Indices Under Seismic Loading- A Review by Debarati Datta, Samyak D

Parekar

189 Design and Optimization of the Brake Slack Adjuster for Light Commercial Vehicle Braking System by Sunil

Karwande, Sunil Vitthal Karwande

12:00-12:15

513 Study of Indentation of an Elastic Layer Substrate by a Rigid Wedge Indenter Under Plane

Strain Conditions by Ashta Navdeep Karuriya, Tanmay K. Bhandakkar

836 An Experimental Study of a Novel Energy ScavengerCum Vibration Absorber by K. Srikanth, K. Vishvanath

Allamraju

1179 Boyancy Driven Heat Transfer Effect in Room Ventilation Due to Discrete Heat Sources by Neha

Gupta, Ameeya Kumar Nayak

1119 Characterization of Near Crack Tip Stresses for Fracture Testing Specimens from Strength Mismatch

Weld by Suranjit Kumar, P K Singh, R J Patel

377 Modelling and Analysis of Metal Drilling Proces Using Experimental Study and Finite Element Method by

Pandithevan Ponnusamy, Vinayaga Muruga Pandy N, Pandithevan P

12:15-12:30780 Behaviour of RC Shear Wall with and without

Opening Using Concealed Bracing by Mahadik S.N., S. R. Bhagat

879 An Energy-Based Approach for Extracting the Dynamic Instability Parameters of Dielectric Elastomer

Actuators with Unequal Biaxial Prestress by Manish Joglekar, S. Bajpayee, D.M. Joglekar

1370 Evaluating Differences in Airflow Patterns for Similar Rural Kitchens Using Cfd by Ronita Bardhan,

Ramit Debnath, Rangan Banerjee

631 Analysis of Crack Propagation in Gusset Plates by Meet Chapani, Bhairav Thakkar

535 Optimizing the Design of Engine Timing Chain System of Passanger Car by Abhijeet Shinde

12:30-12:45804 Design and Testing of Compressor Mapping TestCell for High Horse Power Turbocharger. by Sarang

Kumbhalkar, Sarang Kumbhalkar, H.P. Khairnar

949 Radial and Thickness Mode Calculationsof PZT-5H Disc by Using Ambient Vibrations by K. Vishvanath

Allamraju

155 Numerical Simulation Of The Turbulent Air Flow In The Narrow Circular Channel with Centre-Cleared

Rib Vortex by Suvanjan Bhattacharyya, Himadri Chattopadhyay, Anirban Roy, Aritra Rakshit

477 A Linearized Toughness Model for Concrete by Considering Toughening Mechanisms by Keerthy M

Simon, J M Chandra Kishen

630 GA Based Thickness Optimization of Flat Slab by Samruddha Raje, G. S. Doiphode

12:45-13:00523 Second Gradient Approach for Modelling Damge by Svnpsh Santosh Kakarla, Amirtham

Rajagopal

1089 Vibration Based Hybrid Energy Harvester for Broadband Harvesting by Rajarathinam M, Shaikh

Faruque Ali

711 Coupled Fluid-Structure Analysis of Inlet Distortion Measuring Rake for Fighter Aircraft by

Aishwarjya Gogoi, Rohit Vashistha

766 Nonlinear Analysis of Fiber Wrapped Reinforced Concrete Beams with Cohesive Model by Shuvodeep

Chakraborty, Jha D.K., G.R. Reddy, K. Srinivas

1056 A Computer Simulation Model for Smartly Actuated Dorsal Fin with Compliant Mechanism and Shape Memory

Alloy by Govindarajan G., R. Sharma

13:00-13:1598 Thermostructural Design of an Unconventional Section with Stiffened and Unstiffened Panels by

Jayanthi G., P.C.Jain

350 Effect of rotation and baroclinicity on heat transport and turbulent convection in annular flow by

Ayan Kumar Banerjee, Sridhar Balasubramanian, Amitabha Bhattacharya

988 Effect of Friction Between Punch & Die on Springback in 60 Degree V Bend by Sayyad V.M., Sangram S. Patil,

Vishwadeep C. H, Phalle Vikas M

13:15-13:301136 Numerical Investigation on Effect of Moving

Vanes and Vehile Velocity on Exhaust Flow of Engine in Armoured Combat Vehicle by Rohit More

13:30-14:30


Program Details (Friday, 01 July, 2016) [Forenoon Session]

Lunch

Plenary Talk: 45 minutes each (3 mins intro + 35 mins talk + 7 mins Q/A) Keynote Lecture: 30 minutes each (2 mins intro + 25 mins talk + 3 mins Q/A) Paper Presentation: 15 minutes each (1 min intro + 12 mins talk + 2 mins Q/A)Congress Concludes

Page 12

Sixth International Congress on Computational Mechanics and Simulation (ICCMS2016) held on 27thJune –1stJuly

2016 at Indian Institute of Technology Bombay (IITB), India, organized and hosted jointly by Department of Civil

Engineering, IIT Bombay and Department of Structural Engineering, Veermata Jijabai Technological Institute

(VJTI) Mumbai, under the auspices of Indian Association for Computational Mechanics (IndACM).

The Indian Association for Computational Mechanics (IndACM) was founded on 1st January 2000 to further the

growth of Computational Mechanics in different disciplines. The first five International Congresses on Computa-

tional Mechanics were held under the aegis of IndACM at IIT Kanpur (2004), IIT Guwahati (2006), IIT Bombay

(2009), IIT Hyderabad (2012) and SERC Chennai (2014).

The aim of ICCMS2016 is to provide a forum for scientists, academicians, analysts, designers and practicing engi-

neers from around the globe to interact and exchange ideas and establish relationships from all areas of theoretical

and applied mechanics including theoretical, computational and experimental aspects, as well as theoretical model-

ling, methods of analysis and instrumentation besides setting directions for future growth. It includes basic disci-

pline-oriented as well as inter-disciplinary areas.

IIT BOMBAY VJTI

SIXTH INTERNATIONAL CONGRESS ON

COMPUTATIONAL MECHANICS AND SIMULATION

sixth international congress on computational mechanics and

Documents