SITECH (WA) PTY LTD

2DMachine Control Systems

GCS500 for Graders

Station Content Guide

the presenter of the sub-stations should – cover the following content at the different machines

(sub-stations)

– cover the points listed per machine (sub-station) and repeat constantly the points from the next slide

– show the configuration which we have installed and on display so that the customer understands the parts of the system

– show flexibility in terms of AccuGrade or GCS900 depending on what is installed on the machines (sub-stations)

Grade Control Systems GCS500

2D Machine Control Systems Flexible and interchangeable from machine to

machine and machine type to machine type Supported from Control Box for 2D only or the CB430

(2D &3D) with one onboard software Full support of 2D functionality also on the CB430 Multilingual support Wide range of configurations in hard- and software fully ubgradeable to 3D Machine Control Systems Available for all machine manufacturer and also as

factory fitted Trimble Ready pre-installation

Cross slope guidance

Cross slope guidance

When using a cross slope guidance, the lightbars only give guidance to one blade tip and only the lightbar corresponding to that is active. The lightbar corresponding to the unguided blade tip is blank. The horizontal lightbar is blank.

CB430 LB400

Trimble GCS500: 2D Grader– Cross-slope

Harness

CB420 AS400

Power ModulePM400

Valve ModuleVM4X0

or RS400

GCS500 for Graders - Benefits

Provides a simple solution to many sloping applications Cross slope only 100% slope sensors Full rotation capability Upgradeable to

elevation control Easy to learn and use Ideal for machines

using multiple operators No grade checking anymore Reduction of costs Reduction of downtime Productivity enhancement Flexibility to grow and get upgraded

Trimble GCS500Applications Designed for applications creating or maintaining

slopes Road maintenance Sports fields Embankments Road ditches Road construction Highway construction