sistema implantolÓgico implantology system...
TRANSCRIPT
Edición: Septiembre 2016Edition: September 2016
EKTOSMICRODENT
Implantes de conexión internaInternal connection implants
SISTEMA IMPLANTOLÓGICO IMPLANTOLOGY SYSTEM
Barcelona (Spain)
Instalaciones Microdent (nave de producción y nave comercial) Microdent facilities (manufacturing and commercial sites)
Microdent corporativo/ Microdent corporate
ww
w.m
icro
dent
syst
em.c
omPRESENTACIÓNPRESENTATIONImplant Microdent System S.L. es una empresa que desde sus inicios en 1983 está dedicada al desarrollo, fabricación y comer-cialización de sistemas destinados al tratamiento odontológico y especialmente a la implantologia oral.
Siempre velando por la satisfacción de sus clientes, Microdent ofrece todas las garantías de calidad y servicio que vienen avaladas por su larga y ascendente trayectoria profesional en el campo de la implan-tología oral.
La realización periódica de cursos de formación para profesionales del sector y la existencia de un equipo de colaboración y asesora-miento científico, nos permite mantener y disponer de unos produc-tos que cumplen los más rigurosos parámetros de calidad estableci-dos, así como garantizar la capacidad de satisfacer las necesidades de nuestros clientes.
Microdent dispone de unas modernas instalaciones dotadas de la tecnología más innovadora, lo que la convierte en una de las empresas pioneras en la investigación y fabricación de soluciones para la implantologia oral. Las patentes obtenidas por los productos Microdent demuestran la constante dedicación de la empresa a la labor de investigación.
Implant Microdent System S.L. is a company that, from its creation in 1983, has specialized in developing, manufacturing and market-ing components for odontological treatments, and, specially, oral implantology.
Always striving for customer satisfaction, Microdent offers all the guarantee, both of quality and service, backed up by its long and ascending professional history in the field of oral implantology.
The periodical offer of formation courses for professionals of the implantology field and the existence of a collaboration and assess-ment team allows Microdent to have products that verify the most strict quality parameters stablished, as well as to satisfy the needs of its clients.
Microdent has modern facilities equipped with the most cutting-edge technology, thus making Microdent into one of the pioneer companies in the research and manufacture of solutions for oral implantology. The patents obtained by Microdent products demonstrate the contin-ued dedication of the company to the research work.
ORTODONCIAMICRODENTMicroimplantes de Ortodoncia
Catálogo de productos
CORTICAL-FIXMICRODENTElevación de seno interna
Catálogo de productos
GENIUSMICRODENT
MANUAL DE PRODUCTO
Sistema implantológico
EKTOSMICRODENT
MANUAL DE PRODUCTO
Sistema implantológico
Presentación de producto/ Product presentation
Catálogos de implantes/ Implant catalogues
Manuales técnicos/ Technical implant manuals
Guías rápidas de producto/ Product quick-guides
Otros catálogos/ Other catalogues
Información digital/ Digital information
REGENERACIÓN ÓSEAMICRODENTInstrumental y casos clínicos
Catálogo de productos
GENIUSMICRODENT
GUÍA DE PRODUCTOS
Sistema implantológico
GENIUSImplantes de conexión interna
Sistema implantológicoSistema implantológico
EKTOSMICRODENT
GUÍA DE PRODUCTOS
Sistema implantológico
EKTOSImplantes de conexión interna
Sistema implantológico
CONEXIÓN EXTERNAMICRODENT
GUÍA DE PRODUCTOS
Sistemas implantológicos
SYSTEMImplantes de conexión externa
Sistema implantológico
UNIVERSALImplantes de conexión interna
Sistema implantológicoSistema implantológico
MICRODENTTRYLOGICGUÍA DE PRODUCTOS
Sistema implantológico
TRYLOGICImplantes de conexión interna
Sistema implantológico
MKpro & MKpro 4MICRODENT
GUÍA DE PRODUCTOS
Sistema implantológico
EXPANSIÓN ÓSEAMICRODENT
Manual de uso de los expansores
Catálogo de productos
www.microdentsystem.com
ww
w.m
icro
dent
syst
em.c
om
nº1742465
Registro de marca MICRODENTMICRODENT trademark registration
nº9602250
Patente en España de los expansores de huesoPatent for bone expanders in Spain
nº6146138
Patente en EUA de los expansores de huesoPatent for bone expanders in USA
nº023801558
Patente en Europa de los expansores de huesoPatent for bone expanders in Europe
nº9800394
Patente del sistema de fijación protésica Micro-pikPatent for prosthetic Micro-pik fixation system
nº20002497
Patente del implante dental transmucosoPatent for transmucosal dental implant
nº20002545
Patente de la rótula para sobredentaduraPatent for overdenture flat-ball
nº200102649
Patente útil de seguridad para cirugíaPatent for surgery security device
nº200102769
Patente del implante dental de fijación por impactoPatent for impact fixation dental implant
nº200102914
Patente del implante provisional bicorticalPatent for bicortical provisional implant
nº200200087
Patente del implante de conexión internaPatent for internal connection implant
nº200201614
Patente del implante dental perfeccionadoPatent for improved dental implant
nºP200300602
Patente del sistema de retención graduable para sobredentaduraPatent for overdenture adjustable retention system
nº200402082
Patente del sistema de unión biomecánicaPatent for biomechanical connection system
nº200800195
Patente CORTICAL-FIX para la conformación de la cavidad sinusal maxilarCORTICAL FIX patent - conformation of the maxillary sinus cavity
nº200203054
Patente de la utilización de la melatonina para la regeneración ósea, de uso humano y veterinario como producto activoPatent for use of melatonin for bone regeneration for human and veterinary use as active product
nº200701563
Patente PILAR CAPITEL de corrección angular protéticaCAPITEL abutment patent - prosthetic angular correction
nº200702213
Patente OSSCILIA - Retenedor esférico oscilante para la fijación de sobredentadurasOSSCILIA patent - spherical oscillating retainer for overdenture fixation
nºP200503064
Patente NOVATECH - Sistema de fijación angularNOVATECH patent - angular fixation system
nº200700408
Patente implante dentalPatent for dental implant
nº200701138
Patente MRT - Implante dental con unión protésica solidariaMRT patent - dental implant with integral locking system
nº200402082
Patente sistema RODAS de unión biomecánica entre implante y prótesisRODAS system patent - bio-mechanical connection system between implant and prosthesis
nº200703251
Patente llave de retención para implantesPatent for implant retention key
nº200300041
Patente dispositivo para fijación de prótesis dentalPatent for fixation system of dental prosthesis
nº200500306
Patente implante ortodónticoPatent for orthodontics implant
nº200801197
Patente implante MV para inserción sin fresadoMV implant patent - insertion without drilling
nº200930627/a
Plataforma endoósea para la implantación de prótesis dentalesPatent for endosseus platform for dental prosthesis implantation
nº201031083/ot
Expansores de hueso para Cirugía Dental GuiadaPatent for bone expanders for guided dental surgery
nº201030002/5
Corrector protésico del disparalelismo de los implantes dentalesPatent for disparallelism correction of dental implants.
30 Patentes nos avalanBacked up by 30 patentsFruto del espíritu de mejora y de la constante investigación, los productos Microdent están protegidos con diversas patentes de invención y modelos de utilidad que protegen nuestra manera de entender la implantología oral.Driven by the constant desire to improve and continuous research, Microdent products are protected by several patents and utility models that back up and protect our approach to oral implantology.
DestornilladoresScrewdrivers
Tornillos de cierreCover screw
Pilar cónico con pestañaConical abutment with flap Pag. 22
Fresas con topeStop drills
Pilar provisionalProvisional abutment
Pilar multifunción Multifunction abutment
Aditamentos para pilar Capitel Mini yCapitel Mini anguladoMini Capitel and angled Mini Capitel abutment components
Instrumental de cirugíaSurgical instruments
Pilar Capitel MiniMini Capitel abutment
Kit quirúrgicoSurgical kit
Pilar Capitel Mini anguladoAngled Mini Capitel abutment
Pilar de cicatrización Healing abutment
Pilar semicalcinable CrCo plastic abutment
Pilar de cicatrización estético Aesthetic healing abutment
Pilar semicalcinable orientableAdjustable CrCo plastic abutment
Toma de impresiones, cubeta abierta Open tray impression taking
Toma de impresiones, cubeta cerrada Closed tray impression taking
Sistema de retención OssciliaOsscilia retention system
Sistema Micro-LocMicro-Loc system
Motores de cirugíaSurgical engines
PRÓTESISPROSTHESISCementadas/ Cemented
Atornilladas/ Screwed
Sobrecoladas/ Overcast
Sobredentaduras/ Overdenture
Pilar cónico sin pestaña Conical abutment without flap
Características del implanteImplant features
Pilar calcinablePlastic coping abutmentInstrucciones de uso del packaging del implante
Instructions for use-packaging
Pag. 13
Pag. 27
Pag. 11
Pag. 26
Pag. 14
Pag. 29
Pag. 15
Pag. 27
Pag. 18
Pag. 18
Pag. 28
Pag. 19Pag. 30
Pag. 19Pag. 30
Pag. 20
Pag. 21
Pag. 31
Pag. 32
Pag. 33
Pag. 34
Pag. 23
Pag. 10
Pag. 25
Pag. 12
Pag. 12
Pag. 26
Pag. 09
Pag. 25
Pag. 08
Pag. 23
Implantes EktosEktos Implants
Tornillo de prótesisProsthesis screwImplantes Ektos V
Ektos V Implants
Pilar angulado estéticoAesthetic angled abutmentFresas para protocolo quirúrgico
Drills for surgical protocol
Pilar de carga inmediataImmediate loading abutment
Secuencia de fresadoDrilling sequence
Kit de topes para fresasStop drills
Pilar DomoDomo abutment
ÍNDICEINDEX
Implantes EktosEktos Implants
Importante/ Important• El implante se suministra acompañado del pilar multifunción (ver página 14), que se caracteriza por presentar una múltiple funcionalidad: transportador, transferidor y pilar provisional.• Supplied together with a multifunction abutment (see page 14), which is characterized by its multiple functionality: implant holder, transfer and provisional abutment.
Ektos cilíndrico disponible en dos versiones: AT (arenado total) y CP (cuello pulido)./ Ektos cylinder is available in two versions: AT (total- ly sandblasted) and CP (machined collar).
EK3708CPEK3708AT
8mmLongitud/ Length
EK4208CPEK4208AT
8mmLongitud/ Length
EK4808CPEK4808AT
8mmLongitud/ Length
EK5808CPEK5808AT
8mmLongitud/ Length
EK3710CPEK3710AT
10mmLongitud/ Length
EK4210CPEK4210AT
10mmLongitud/ Length
EK4810CPEK4810AT
10mmLongitud/ Length
EK5810CPEK5810AT
10mmLongitud/ Length
EK3712CPEK3712AT
12mmLongitud/ Length
EK4212CPEK4212AT
12mmLongitud/ Length
EK4812CPEK4812AT
12mmLongitud/ Length
EK5812CPEK5812AT
12mmLongitud/ Length
EK3714CPEK3714AT
14mmLongitud/ Length
EK4214CPEK4214AT
14mmLongitud/ Length
EK4814CPEK4814AT
14mmLongitud/ Length
EK5814CPEK5814AT
14mmLongitud/ Length
EK3716CPEK3716AT
16mmLongitud/ Length
EK4216CPEK4216AT
16mmLongitud/ Length
EK4816CPEK4816AT
16mmLongitud/ Length
EK5816CPEK5816AT
16mmLongitud/ Length
EK3718CPEK3718AT
18mmLongitud/ Length
EK4218CPEK4218AT
18mmLongitud/ Length
EK4818CPEK4818AT
18mmLongitud/ Length
Plataforma Ø3.50mm/ Platform Ø3.50mm
Núcleo Ø4.20mmCore Ø4.20mm
Núcleo Ø4.80mmCore Ø4.80mm
Núcleo Ø5.80mmCore Ø5.80mm
Núcleo Ø3.70mmCore Ø3.70mm
Plataforma Ø4.50mm/ Platform Ø4.50mm
Plataforma Ø5.70mm/ Platform Ø5.70mm
Microdent Ektos product manual8
Implantes Ektos VEktos V implants
Importante/ Important• El implante se suministra acompañado del pilar multifunción (ver página 14), que se caracteriza por presentar una múltiple funcionalidad: transportador, transferidor y pilar provisional. • Supplied together with a multifunction abutment (see page 14), which is characterized by its multiple functionality: implant holder, transfer and provisional abutment.
Ektos V cónico sólo disponible en versión CP (cuello pulido)./ Ektos V conical is only available in CP version (machined collar).
* La plataforma Ø3.50mm comprende dos núcleos: Ø3.70mm y Ø4.20mm/ Ø3.50mm platform includes two cores: Ø3.70mm and Ø4.20mm
EKV3710CP10mm
Longitud/ Length
EKV4210CP10mm
Longitud/ Length
EKV4810CP10mm
Longitud/ Length
EKV3712CP12mm
Longitud/ Length
EKV4212CP12mm
Longitud/ Length
EKV4812CP12mm
Longitud/ Length
EKV3714CP14mm
Longitud/ Length
EKV4214CP14mm
Longitud/ Length
EKV4814CP14mm
Longitud/ Length
EKV3716CP16mm
Longitud/ Length
EKV4216CP16mm
Longitud/ Length
EKV4816CP16mm
Longitud/ Length
EKV3718CP18mm
Longitud/ Length
EKV4218CP18mm
Longitud/ Length
EKV4818CP18mm
Longitud/ Length
Leyenda de color para plataformasPlatform colour legend
Plataforma/ Platform Ø3.50mm Plataforma/ Platform Ø4.50mm Plataforma/ Platform Ø5.70mm
Plataforma Ø3.50mm - Núcleo Ø3.70mm/ Platform Ø3.50mm - Core Ø3.70mm
Plataforma Ø4.50mm/ Platform Ø4.50mm
Núcleo Ø3.70mmCore Ø3.70mm
Núcleo Ø4.20mmCore Ø4.20mm
Núcleo Ø4.80mmCore Ø4.80mm
ww
w.m
icro
dent
syst
em.c
om
Manual de producto Microdent Ektos 9
Fresas para protocolo quirúrgicoDrills for surgical protocol
FC20CFresa cortical (corta)Cortical drill (short)
FP1812Fresa piloto (corta)
Pilot drill (short)
F250CØ2.50mm
Fresa quirúrgica (C)Surgical drill (short)
FC20LFresa cortical (larga)
Cortical drill (long)
FP1817Fresa piloto (larga)
Pilot drill (long)
F250LØ2.50mm
Fresa quirúrgica (L)Surgical drill (long)
F280CØ2.80mm
Fresa quirúrgica (C)Surgical drill (short)
F300CØ3.00mm
Fresa quirúrgica (C)Surgical drill (short)
F320CØ3.20mm
Fresa quirúrgica (C)Surgical drill (short)
F280LØ2.80mm
Fresa quirúrgica (L) Surgical drill (long)
F300LØ3.00mm
Fresa quirúrgica (L) Surgical drill (long)
F320LØ3.20mm
Fresa quirúrgica (L) Surgical drill (long)
F350CØ3.50mm
Fresa quirúrgica (C)Surgical drill (short)
F380CØ3.80mm
Fresa quirúrgica (C)Surgical drill (short)
F420CØ4.20mm
Fresa quirúrgica (C)Surgical drill (short)
F350LØ3.50mm
Fresa quirúrgica (L) Surgical drill (long)
F380LØ3.80mm
Fresa quirúrgica (L) Surgical drill (long)
F420LØ4.20mm
Fresa quirúrgica (L) Surgical drill (long)
FP10Fresa para
puntear el alvéoloTip milling drill for
the alveolus
EXFRESExtensor de
fresaDrill extender
F450CØ4.50mm
Fresa quirúrgica (C)Surgical drill (short)
(*)F1828Fresa guíaGuide drill
F510LØ5.10mm
Fresa quirúrgica (L) Surgical drill (long)
(*)F350ECFresa helicoidal
extra-cortaExtra short helical drill
(*)F420ECFresa helicoidal
extra-cortaExtra short helical drill
Microdent Ektos product manual10
Fresas con topeStop drills
FTI300CØ3.00mm
Fresa tope (corta)Stop drill (short)
FTI380CØ3.80mm
Fresa tope (corta)Stop drill (short)
FTI180CØ1.80mm
Fresa tope (corta)Stop drill (short)
FTI320CØ3.20mm
Fresa tope (corta)Stop drill (short)
FTI420CØ4.20mm
Fresa tope (corta)Stop drill (short)
FTI250CØ2.50mm
Fresa tope (corta)Stop drill (short)
FTI350CØ3.50mm
Fresa tope (corta)Stop drill (short)
FTI450CØ4.50mm
Fresa tope (corta)Stop drill (short)
FTI450LØ4.50mm
Fresa tope (larga)Stop drill (long)
FTI300LØ3.00mm
Fresa tope (larga)Stop drill (long)
FTI380LØ3.80mm
Fresa tope (larga)Stop drill (long)
FTI180LØ1.80mm
Fresa tope (larga)Stop drill (long)
FTI320LØ3.20mm
Fresa tope (larga)Stop drill (long)
FTI420LØ4.20mm
Fresa tope (larga)Stop drill (long)
FTI250LØ2.50mm
Fresa tope (larga)Stop drill (long)
FTI350LØ3.50mm
Fresa tope (larga)Stop drill (long)
FTI510CØ5.10mm
Fresa tope (corta)Stop drill (short)
FTI510LØ5.10mm
Fresa tope (larga)Stop drill (long)
Importante/ Important• Fabricadas en acero inoxidable de alta dureza, todas nuestras fresas garantizan un perfecto corte durante los fresados quirúrgicos. (*)Disponibles en varios diámetros.• Made of high hardness surgical stainless steel, they ensure a perfect cut during surgical drilling. (*)Available in various diameters.
Kit de topes para fresas de Microdent ya disponible./ There is also available a surgical kit for Microdent drill stops (drill stop kit).
ww
w.m
icro
dent
syst
em.c
om
Manual de producto Microdent Ektos 11
Ø3.50mm Ø4.50mm Ø5.70mm
Fresa final (*en función del tipo o calidad del hueso)Final drill (*depending on bone type and quality)
Estas recomendaciones se indican a nivel orientativo, debiéndose par-ticularizar en función del tipo o calidad del hueso donde se deba colocar el implante./ These recommendations are only for guidance and must be tailored to the type and quality of the bone where the implant is going to be inserted.
Protocolo quirúrgico para implante de Ø 4.20.Surgical protocol for Ø 4.20 platform implant.
NÚCLEO DE IMPLANTE CORE OF IMPLANT
Fresa cortical Cortical drill
3.70 4.20 4.80 5.80
FC20
FP1812/ FP1817
F250
F280* F320*
F300* F350*
F250/ F280 F250/ F280
F320
F350*
F380*
F250/ F280
F350/ F380
F450*
F510*
FP1812/ FP1817 FP1812/ FP1817 FP1812/ FP1817
FC20 FC20 FC20
Fresa piloto (corta/ larga) Pilot drill (short or long)
Fresa intermedia Intermediate drill
Fresa intermedia Intermediate drill
Plataforma/ Platform
Kit de topes para fresas ref. KTF Stop drills PN-KTF
Secuencia de fresadoDrilling sequence
El kit de topes Microdent simplifica el proceso de fresado y aporta un perfecto control de profundidad de la osteotomía, que repercute en la seguridad del paciente. Surgical kit to simplify the drilling process and to provide a perfect control of the depth of the osteotomy positively impacting on patient’s safety.
Contenido/ ContentEl kit contiene 36 topes para implantes codificados por colores/The kit contains 36 colour-coded drill stops for implants:
• Azul celeste (fresas de 1,50mm/ 1,80mm)/ Pale blue: Ø 1.50mm and 1.80mm drills• Amarillo (fresas de 2,50mm/ 2,80mm)/ Yellow: Ø 2.50mm and 2.80mm drills• Violeta (fresas de 3,00mm/ 3,20mm)/ Violet: Ø 3.00mm and 3.20mm drills • Verde (fresas de 3,50mm/ 3,80mm)/ Green: 3.50mm and 3.80mm drills• Bronce (fresas de 4,20mm/ 4,50mm)/ Bronze: Ø 4.20mm and 4.50mm drills• Azul oscuro (fresas de 5,10mm)/ Dark blue: Ø 5.10mm drills• Llave para extraer los topes/ Stop detaching key• Guía que mide la relación entre el tope y el implante/ Guide to mesure the stop-implant relation• Guía de profundidad de fresado/ Depth guide
Microdent Ektos product manual12
Punta del implante redondeada para mini-mizar lesiones en las estructuras anatómicas sensibles.Rounded implant tip to minimize possible injuries on sensitive anatomical structures.
Rosca externa de doble entrada que permite acortar el número de vueltas necesarias para la inserción del implante.External double-entry threading to reduce the number of turns required to insert the implant.
Detalle de la plataforma de cuello pulido. Detail of machined collar platform.
Estrías cortantes helicoidales.Helical cutting grooves.
Tratamiento de superficie ATEC (Abrasive Treatment Extreme Cleaning).ATEC surface treatment (Abrasive Treatment Extreme Cleaning).
Pilar multifunción incorporado. Permite realizar una toma de impresiones a nivel del propio pilar y puede utilizarse como pilar definitivo dependiendo del tipo de tratamiento.Includes multifunction abut-ment. It enables the taking of impressions around the abutment itself and can be used as a permanent abut-ment depending on the type of treatment.
Instructions for use: implants with multifunction abutment packaging
1. Abrir el tapón de rosca del envase del implante en sentido antihorario.1. Open the implant threaded cap counter-clockwise.
2. El envase dispone de un opér-culo de aluminio que hay que retirar mediante una pequeña solapa.2. Remove the aluminum cap from the container by a flap.
3. Una vez retirado el opérculo, extraer el envase del implante. El tapón de plástico contiene el tornillo de cierre.3. Once the cap has been re-moved, extract the implant con-tainer. The plastic cap contains the cover screw.
4. Extraer el tapón de plástico del envase interno.4. Remove the plastic cap from the inner container.
Características del implanteImplant features
5. A continuación, el implante se podrá retirar con la llave manual para pilares multifunción.5. Then, remove the implant with the manual key for multi-function abutment.
6. También es posible la extracción del implante con la llave de contra- ángulo para pilares multifunción.6. The implant can also be removed with the contra angle key for multi-function abutment.
Instrucciones de uso: Envase implante con pilar multifunción
ww
w.m
icro
dent
syst
em.c
om
Manual de producto Microdent Ektos 13
Llaves para insertar los implantes mediante el pilar multifunción Keys to insert implants by means of multifunction abutment
El pilar multifunción se caracteriza por presentar una triple funcionalidad: transportador, transferidor y pilar provisional.Se presenta en estado estéril dado que se suministra acompañando al implante y al tornillo de cierre en su propio envase. Se mantiene unido al implante mediante el tornillo de retención de la prótesis que también se presenta en estado estéril.El cono protésico del pilar presenta en su interior un hexágono que tiene la funcionalidad de alojar una herramienta que permitirá:• La extracción del implante y el correspondiente pilar del envase en que se presenta al cliente.• El transporte del implante desde el envase hasta el punto de inserción mediante la llave seleccionada• La aplicación del torque requerido para la inserción del implante en el alvéolo implantario (sólo en el caso de la llave de carraca ola de contra-ángulo).
Characterized by its multiple functionality: implant holder, transfer and provisional abutment.Supplied in sterile state with the implant and cover screw within the same packaging. Connected to the implant by a prosthetic screw, which is also presented in sterile state. The upper part of the abutment has a hexagonal socket to accomodate a tool for: • Implant and abutment extraction from the container. • Implant transport from the container to the insertion point.• Applying the required torque, with a ratchet spanner or contra angle, in order to insert the implant into the bone.
Este tipo de llaves permite la aplicación del par de torsión requerido para la inserción del implante.These types of keys enable the required torque for implant insertion to be applied.
Pilar multifunción Multifunction abutment
Llave directa al implante para su inserción Key direct to implant for insertion
EKLLIC35CEKLLIC35L
EKLLIC57C EKLLIC57L
Corto / ShortLargo / Long
La punta de la llave está diseñada para acoplarse perfectamente en la conexión del implante.The key tip has been designed to fit perfectly to the implant inner cone.
EKLLIC45C EKLLIC45L
Ø5.70mmØ4.50mmØ3.50mm
PMFLLID PMFLLICPMFLLIM
Contra-ángulo Contra angle
ManualManual
Carraca/ DinamométricaRatchet/ Torque
Microdent Ektos product manual14
Se emplean para el control y guía de la dirección de los alvéolos quirúrgicos. Marcas de profundidad de 6 a 12mm.Used to control and guide the direction of the surgical alveolus. With depth marks from 6mm to 12mm.
Permiten realizar un pre-roscado del hueso cuando las características del mismo así lo requieran. Marcas de profundidad de 8mm a 16mm.Used to pre-thread the bone if its characteristics so require. With depth marks from 8mm to 16mm.
Conformadores de rosca/ Bone taps
Guías de inclinación/ Lean guides
Material del instrumental: acero inoxidable./ Instrument material: stainless steel.
Instrumental de cirugíaSurgical instruments
GI3245 GI1828
EKCR37Ø3.70mm
Núcleo / Core
EKCR48Ø4.80mm
Núcleo / Core
EKCR42Ø4.20mm
Núcleo / Core
EKCR58Ø5.80mm
Núcleo / Core
Ø3.50mm Ø4.50mm Ø5.70mm
Limpiador de rosca interna/ Internal thread cleanerSe emplean para limpiar excepcionalmente la rosca interna del implante.Used to clean the implant internal thread.
LRI180
Medidor de profundidad/ Depth gaugeDispone de marcas de profundidad de 6mm a 18mm.With depth marks from 6mm to 18mm.
MP1822
ww
w.m
icro
dent
syst
em.c
om
Manual de producto Microdent Ektos 15
Llaves/ Keys
LDR2070 LC44 LD2 & LD3
LD1
Instrumental de cirugíaSurgical instruments
Llave extraoral/ Extra oral spannerPermite la colocación de implantes desde el exterior de la cavidad bucal, adaptándose al portaimplantes.Used to place implants from outside the oral cavity. It adapts to implant holder square.
LLEO
Llave dinamométrica regulable/ Adjustable torque spannerPermite regular el par de apriete a partir de 20 Ncm hasta 70 Ncm, simplemente girando la rosca hasta la posición de torque deseada.Used to adjust the torque from 20 Ncm to 70 Ncm, just turning its wheel up to the required torque, just turning its wheel up to the requiered torque.
Llave dinamométrica/Torque spanner Disponible en 20Ncm y 30 Ncm. Regulada para no exceder un par de apriete de 20 o 30 Ncm.Available in 20Ncm and 30Ncm. Adjusted in such a way as to prevent exceeding a torque of 20 or 30 Ncm.
Llave de contra-ángulo/ Contra angle spannerSe aplica directamente sobre el portaimplante metálico.Directly applied to the metal implant holder.
Llave de carraca/ Ratchet spannerEsta llave no tiene dispositivo de limitación de esfuerzo.Without any strength limiting device.
Microdent Ektos product manual16
Adaptadores/ Adaptors
CEKAF35CCorto / Short
CEKAF45CCorto / Short
CEKAF35LLargo / Long
CEKAF45LLargo / Long
CEKAF57CCorto / Short
CEKAF57LLargo / Long
Se utilizan para la fijación del implante en situaciones que por falta de espacio no pueda ser insertado mediante el pilar multifunción. Una vez extraido el pilar multifunción, se une al implante mediante el tornillo que lleva incluido.Used to fix an implant in cases where lack of space does not make possible its insertion using a multifunction abutment. Once the multifunction abutment has been removed, it is connected to the implant using the included screw.
Instrumental de cirugíaSurgical instruments
Se utilizan para cortar encía de forma circular y atraumática con el fin de descubrir el hueso o para localizar el implante cuando realizamos una segunda cirugía (para colocar los pilares de cicatrización).Used to cut the gum in a circular and non-traumatic manner in order to expose the bone or locate the implant when a second surgery is performed (to place healing abutments).
Bisturís circulares/ Circular scalpels
BC355CØ3.50mm
Corto / Short
BC420CØ4.20mm
Corto / Short
BC355LØ3.50mm
Largo / Long
BC420LØ4.20mm
Largo / Long
BC450CØ4.50mm
Corto / Short
BC450LØ4.50mm
Largo / Long
BC560CØ5.60mm
Corto / Short
BC560LØ5.60mm
Largo / Long
* También disponible el bisturí BC510 de Ø5.10mm en largo y en corto./ Also available the short and long Ø5.10mm scalpel (BC510).
Ø5.70mm
Ø5.70mm
Ø4.50mm
Ø4.50mm
Ø3.50mm
Ø3.50mm
ww
w.m
icro
dent
syst
em.c
om
Manual de producto Microdent Ektos 17
Contenido del Kit/ Content of the kit• Fresa cortical (corta y larga)/ Cortical drill (short and long)• Fresa piloto (corta y larga)/ Pilot drill (short and long)• Fresa Ø2.50 (corta y larga)/ Ø2.50 drill (short and long)• Fresa Ø2.80 (corta y larga)/ Ø2.80 drill (short and long)• Fresa Ø3.00 (corta y larga)/ Ø3.00 drill (short and long)• Fresa Ø3.20 (corta y larga)/ Ø3.20 drill (short and long)• Fresa Ø3.50 (corta y larga)/ Ø3.50 drill (short and long)• Fresa Ø3.80 (corta y larga)/ Ø3.80 drill (short and long)• Fresa Ø4.20 (corta y larga)/ Ø4.20 drill (short and long)• Fresa Ø4.50 (corta)/ Ø4.50 drill (short)• Fresa Ø5.10 (corta)/ Ø5.10 drill (short)• Llave de carraca/ Ratchet spanner• Llave manual pilar multifunción/ Manual key for multifunction abutment• Llave de torque pilar multifunción/ Torque spanner for multifunction abutment• LLave de contra-ángulo pilar multifunción/ Contra angle spanner for multifunction abutment• Llaves para inserción de implantes Ektos (Ø 3,70/ 4,20/ 4,80/ 5,80mm)/ Keys to insert Ø3.70/ Ø4.20/ Ø4.80/ Ø5.80mm implants• Adaptadores (Ø3,70/ Ø4,20/ Ø4,80/ Ø5,80mm)/ Adaptors for Ø3.70/ Ø4.20/ Ø4.80/ Ø5.80mm implants• Llave extraoral/ Extraoral key • Guías de inclinación (2 unidades )/ Lean guides (2 units)• Destornilladores corto y largo de 1.20mm (3 unidades)/ 1.20mm short and long screwdrivers (3 units)
Consulte otros modelos de kits para este sistema de implantes./ See other available kits for this implant system.
Kit quirúrgico ref. KEK+Surgical kit PN-KEK+Kit quirúrgico avanzado con todo el instrumental necessario para la correcta colocación de implantes de conexión interna de la gamma Microdent Ektos. Contiene una bandeja inferior para colocar material complementario (bisturís, conformadores, etc.). Advanced surgical kit containing all the necessary surgical instruments to place internal connection implants of the Microdent Ektos family.It includes a lower tray in order to place complementary instruments (scalpels, countersinks, etc.).
EKTC35 EKTC57EKTC45
Tornillos de cierreCover screws
Importante/ Important• El tornillo de cierre se suministra en estado estéril, en el mismo envase del implante.• Se requiere el uso de un destornillador hexagonal 1.20 mm.• No cementar el tornillo de cierre al implante.• No superar un par de atornillado de 5 Ncm.
• Supplied in sterile state within the implant package. • Required the use of a 1.20mm hexagonal screwdriver.• Do not cement the cover screw to the implant.• Do not exceed a torque of 5Ncm.
Ø5.70mmØ4.50mmØ3.50mm
Microdent Ektos product manual18
EKPCR35022mm
Altura/ Height
EKPCR45022mm
Altura/ Height
EKPCR35033mm
Altura/ Height
EKPCR45033mm
Altura/ Height
EKPCR35044mm
Altura/ Height
EKPCR45044mm
Altura/ Height
EKPCR35055mm
Altura/ Height
EKPCR45055mm
Altura/ Height
Importante/ Important• Este pilar está indicado para el uso posterior de pilares Osscilia y los pilares cónicos sin pestaña. • El pilar de cicatrización se suministra en estado estéril. • Se requiere el uso de un destornillador hexagonal 1.20mm. • No cementar el pilar al implante. • No superar un par de atornillado de 25 Ncm.
• Intended for posterior use of the Osscilia abutments and conical abutments without flap.• Supplied in sterile state.• Required the use of a 1.20mm hexagonal screwdriver.• Do not cement the cover screw to the implant.• Do not exceed a torque of 25Ncm.
Pilar de cicatrizaciónHealing abutment
EKPCR57022mm
Altura/ Height
Ø3.50mm
Ø4.50mm Ø5.70mm
EKPR35022mm
Altura/ Height
EKPR45022mm
Altura/ Height
EKPR57022mm
Altura/ Height
EKPR35033mm
Altura/ Height
EKPR45033mm
Altura/ Height
EKPR35044mm
Altura/ Height
EKPR45044mm
Altura/ Height
EKPR35055mm
Altura/ Height
EKPR45055mm
Altura/ Height
Pilar de cicatrización estéticoAesthetic healing abutment
Importante/ Important• El pilar de cicatrización se suministra en estado estéril.• Se requiere el uso de un destornillador hexagonal 1.20mm. • No cementar el pilar al implante. • No superar un par de atornillado de 25 Ncm.
• Supplied in sterile state. • Required the use of a 1.20mm hexagonal screwdriver. • Do not cement the cover screw to the implant. • Do not exceed a torque of 25Ncm.
Ø3.50mm
Ø4.50mm Ø5.70mm
ww
w.m
icro
dent
syst
em.c
om
Manual de producto Microdent Ektos 19
EKTCA35HCØ3.50
Corto/ Short
EKTCA35HLØ3.50
Largo/ Long
EKTCA45HCØ4.50
Corto/ Short
EKTCA45HLØ4.50
Largo/ Long
EKTCA57HCØ5.70
Corto/ Short
Importante/ ImportantLa retirada de la impresión se realiza con los transferidores. El tornillo de unión se retira con el destornillador MH-120.The impression is removed together with the transfers. The use of a MH-120l screwdriver is required to remove the union screw.
Transferidores hexagonales/ Hexagonal transfers
EKTCA35RCØ3.50
Corto/ Short
EKTCA35RLØ3.50
Largo/ Long
EKTCA45RCØ4.50
Corto/ Short
EKTCA45RLØ4.50
Largo/ Long
EKTCA57RCØ5.70
Corto/ Short
Transferidores circulares/ Circular transfers
Toma de impresiones, cubeta abiertaOpen tray impression taking
EKTUCALLargo/ Long
EKTUCACCorto/ Short
Tornillos de unión/ Union screws
EKRI35Ø3.50mm
EKRI45Ø4.50mm
EKRI57Ø5.70mm
Réplicas/ Analogs
Microdent Ektos product manual20
Transferidores hexagonales/ Hexagonal transfers
CEKTCC35HØ3.50mm
EKRI35Ø3.50mm
CEKTCC35RØ3.50mm
CEKTCC45HØ4.50mm
EKRI45Ø4.50mm
CEKTCC45RØ4.50mm
CEKTCC57HØ5.70mm
EKRI57Ø5.70mm
CEKTCC57RØ5.70mm
Importante/ ImportantAl no tener retención, los transferidores no quedan alojados en la impresión por lo que posteriormente hay que reposicionarlos. El tornillo de unión se retira con el destornillador MH120.As transfers have no retention, they are not housed in the impression, and they must be replaced at a later time. The union screw is removed with an MH-120 screwdriver.
Importante/ ImportantSe suministran con el correspondiente tornillo de unión y el obturador.Supplied with the corresponding union screw and shutter.
Tornillos de unión/ Union screws
Transferidores circulares/ Circular transfers
Réplicas/ Analogs
GNEKTUCTornillo de unión/Closed tray transfer screw
EKTUCBTornillo de unión bola/Closed tray transfer ball screw
EKTBPMFTornillo de unión bola para pilar multifunción/Multifunction abutment ball screw
Toma de impresiones, cubeta cerradaClosed tray impression taking
ww
w.m
icro
dent
syst
em.c
om
Manual de producto Microdent Ektos 21
PRÓTESISPROSTHESIS
Pilar cónico con pestaña Conical abutment with flap
EKPCCP3501H1mm
Altura/ Height
EKPCCP3501R1mm
Altura/ Height
EKPCCP4501H1mm
Altura/ Height
EKPCCP4501R1mm
Altura/ Height
EKPCCP3503H3mm
Altura/ Height
EKPCCP3503R3mm
Altura/ Height
EKPCCP4503H3mm
Altura/ Height
EKPCCP4503R3mm
Altura/ Height
EKPCCP3505H5mm
Altura/ Height
EKPCCP3505R5mm
Altura/ Height
EKPCCP4505H5mm
Altura/ Height
EKPCCP4505R5mm
Altura/ Height
EKPCCP5701H1mm
Altura/ Height
EKPCCP5701R1mm
Altura/ Height
Hexagonal
Circular
Importante/ Important• No superar un par de atornillado de 30Ncm para la fijación definitiva del pilar. En las pruebas de laboratorio se recomienda un par de 10/15 Ncm. • Se recomienda para la fijación del aditamento en clínica el uso de tornillos que no hayan sido utilizados en las pruebas de laboratorio. • Los pilares pueden ser tallados admitiendo ligeras modificaciones en su diseño.
• Do not exceed a torque of 30Ncm for the fixation of the abutment. For laboratory tests, the torque recommended is 10/15Ncm.• It is recommended to not use the same screws as in the laboratory tests to fix the abutment but to use new ones.• Abutment can be cut, accepting minor changes in its design.
Ø3.50mm
Ø3.50mm
Ø4.50mm
Ø4.50mm
Ø5.70mm
Ø5.70mm
Prótesis cementadas/ Cemented prosthesis
Microdent Ektos product manual22
Pilar cónico sin pestaña Conical abutment without flap
Tornillo de prótesis Prosthesis screw
EKPCSP3500H0mm
Altura/ Height
EKPCSP4500H0mm
Altura/ Height
EKPCSP3503H3mm
Altura/ Height
EKPCSP4503H3mm
Altura/ Height
EKPCSP3501H1mm
Altura/ Height
EKPCSP4501H1mm
Altura/ Height
EKPCSP3504H4mm
Altura/ Height
EKPCSP4504H4mm
Altura/ Height
EKPCSP5700H0mm
Altura/ Height
EKPCSP3502H2mm
Altura/ Height
EKPCSP4502H2mm
Altura/ Height
EKPCSP3505H5mm
Altura/ Height
EKPCSP4505H5mm
Altura/ Height
EKPCSP5701H1mm
Altura/ Height
Hexagonal
EKTRHCTornillo de retención para prótesis
Prosthetic retention screw
Importante/ Important• Sirve para todas las prótesis.• Se requiere el uso del destornillador hex 1.20.• No superar un par de atornillado de 30Ncm para la fijación definitiva del tornillo, en las pruebas de laboratorio se recomienda un par de 10/15 Ncm.• Se recomienda para la fijación del aditamento en clínica el uso de tornillos que no hayan sido utilizados en las pruebas de laboratorio.
• It can be used with all prosthesis.• Required the use of a 1.20mm hexagonal screwdriver.• Do not exceed a torque of 30Ncm for the fixation of the abutment. For laboratory tests, the torque recommended is 10/15Ncm.• It is recommended to not use the same screws as in the laboratory tests to fix the abutment but to use new ones.
Ø3.50mm
Ø4.50mm
Ø5.70mm
ww
w.m
icro
dent
syst
em.c
om
Manual de producto Microdent Ektos 23
Ø3.50mm
Ø4.50mm
Ø5.70mm
Pilar cónico sin pestaña Conical abutment without flap
EKPCSP3500R0mm
Altura/ Height
EKPCSP4500R0mm
Altura/ Height
EKPCSP3503R3mm
Altura/ Height
EKPCSP4503R3mm
Altura/ Height
EKPCSP3501R1mm
Altura/ Height
EKPCSP4501R1mm
Altura/ Height
EKPCSP35044mm
Altura/ Height
EKPCSP4504R4mm
Altura/ Height
EKPCSP5700R0mm
Altura/ Height
EKPCSP3502R2mm
Altura/ Height
EKPCSP4502R2mm
Altura/ Height
EKPCSP3505R5mm
Altura/ Height
EKPCSP4505R5mm
Altura/ Height
EKPCSP5701R1mm
Altura/ Height
Circular
Importante/ Important• No superar un par de atornillado de 30Ncm para la fijación definitiva del pilar. En las pruebas de laboratorio se recomienda un par de 10/15 Ncm. • Se recomienda para la fijación del aditamento en clínica el uso de tornillos que no hayan sido utilizados en las pruebas de laboratorio. • Los pilares pueden ser tallados admitiendo ligeras modificaciones en su diseño.
• Do not exceed a torque of 30Ncm for the fixation of the abutment. For laboratory tests, the torque recommended is 10/15Ncm.• It is recommended to not use the same screws as in the laboratory tests to fix the abutment but to use new ones.• Abutment can be cut, accepting minor changes in its design.
Microdent Ektos product manual24
Ø3.50mm Ø4.50mm
Ø5.70mm
CEKPAE3515H15º
EKPCI3501H EKPCI3501R
CEKPAE5715H15º
CEKPAE4515H15º
CEKPAE3520H20º
EKPCI4501H EKPCI4501R
CEKPAE5720H20º
CEKPAE4520H20º
CEKPAE3525H25º
EKPCI5701H EKPCI5701R
CEKPAE5725H25º
CEKPAE4525H25º
Hexagonal
Hexagonal Circular
Pilar angulado estético Aesthetic angled abutment
Pilar de carga inmediata Immediate loading abutment
Importante/ Important• Se suministra con el correspondiente tornillo de retención. • No superar un par de atornillado de 30Ncm para la fijación definitiva del pilar. En las pruebas de laboratorio se recomienda un par de 10/15 Ncm. • Se recomienda para la fijación del aditamento en clínica el uso de tornillos que no hayan sido utilizados en las pruebas de laboratorio. • Supplied with the corresponding retention screw.• Do not exceed a torque of 30Ncm for the fixation of the abutment. For laboratory tests, the torque recommended is 10/15Ncm.• It is recommended to not use the same screws as in the laboratory tests to fix the abutment but to use new ones.
Importante/ Important• El tornillo de unión para la toma de impresiones sobre el pilar de carga inmediata es el EKTUCI. • No superar un par de atornillado de 30 Ncm para la fijación definitiva del pilar. En las pruebas de laboratorio se recomienda un par de 10/15 Ncm. • Se recomienda para la fijación del aditamento en clínica el uso de tornillos que no hayan sido utilizados en las pruebas de laboratorio. • Los pilares pueden ser tallados admitiendo ligeras modificaciones en su diseño.
• The union screw for impression taking with immediate loading implants is PN-EKTUCI.• Do not exceed a torque of 30 Ncm for the fixation of the abutment. For laboratory tests, the torque recommended is 10/15Ncm.• It is recommended to not use the same screws as in the laboratory tests to fix the abutment but to use new ones.• Abutment can be cut, accepting minor changes in its design.
Ø5.70mm Ø5.70mmØ4.50mm Ø4.50mmØ3.50mm Ø3.50mmw
ww.
mic
rode
ntsy
stem
.com
Manual de producto Microdent Ektos 25
Pilar provisional Provisional abutment
EKPPR35H EKPPR35REKPPR45H EKPPR45REKPPR57H EKPPR57R
Hexagonal Circular
Importante/ Important• El pilar para prótesis provisional está fabricado en PEEK.• No se recomienda la permanencia en boca por un periodo superior a 90 días.• No superar un par de atornillado superior a 20Ncm.
• Provisional prosthesis abutment is made of PEEK.• It is not recommended an intraoral setting time longer than 90 days.• Do not exceed a torque of 20Ncm.
Ø5.70mm Ø5.70mmØ4.50mm Ø4.50mmØ3.50mm Ø3.50mm
Pilar Domo Domo abutment
Importante/ Important• El pilar se acompaña en su envase del tornillo de retención EKTRHC (ver pág. 23). • El pilar Domo corto se utiliza para trabajos en el grupo posterior (premolares inferiores y molares superiores e inferiores).• El pilar Domo largo se utiliza para trabajos de gran altura coronaria en el grupo anterior (centrales, laterales, caninos e incluso premolares superiores). • Combinado con el calcinable permite la retención de otro tipo de prótesis como metal-cerámica.
• Supplied with EKTRHC retention screw (see page 23).• The short Domo abutment is used to work in the posterior group (lower premolars and upper and lower molars.• The long Domo abutment is used to work with long coron lengths in the anterior group (central, lateral, canine and even upper premolars).• A Domo abutment combined with a plastic coping enables the retention of other types of prosthesis, such as metal-ceramic prosthesis.
Hexagonal
Circular
CEKDOM35HCCorto/ Short
CEKDOM35RCCorto/ Short
CEKDOM45HLLargo/ Long
CEKDOM45RLLargo/ Long
CEKDOM35HLLargo/ Long
CEKDOM35RLLargo/ Long
CEKDOM57HCCorto/ Short
CEKDOM57RCCorto/ Short
CEKDOM45HCCorto/ Short
CEKDOM45RCCorto/ Short
CEKDOM57HLLargo/ Long
CEKDOM57RLLargo/ Long
Ø3.50mm
Ø3.50mm
Ø4.50mm
Ø4.50mm
Ø5,70mm
Ø5,70mm
Microdent Ektos product manual26
Pilar Capitel Mini Mini Capitel abutment
CEKCAPN3501R1mm
Altura/ Height
CEKCAPN4501R1mm
Altura/ Height
CEKCAPN5701R1mm
Altura/ Height
CEKCAPN3504R4mm
Altura/ Height
CEKCAPN4504R4mm
Altura/ Height
CEKCAPN3502R2mm
Altura/ Height
CEKCAPN4502R2mm
Altura/ Height
CEKCAPN5702R2mm
Altura/ Height
CEKCAPN3503R3mm
Altura/ Height
CEKCAPN4503R3mm
Altura/ Height
Circular
Importante/ Important*El pilar Capitel Mini se suministra en conjunto con el transportador UTSNTICP (plataforma standard) o UTSNTICP51 (plataforma ancha).• Para el atornillado del pilar respecto al implante se requiere el uso de la llave UTSNLEC. • Se recomienda no exceder un par de atornillado de 30 Ncm para la fijación del pilar. En las pruebas de laboratorio se recomienda un par de 10/15Ncm. • El pilar permite compensar disparalelismos de hasta 35º entre implantes.
*Supplied with carrier PN UTSNTICP (standard platform) or UTSNTICP51 (wide platform).• Requiered the use of a UTSNLEC key to screw the abutment into the implant.• Do not exceed a torque of 30Ncm for the fixation of the abutment. For laboratory tests, the torque recommended is 10/15Ncm.• Mini Capitel abutments enables non-parallelism compensation up to 35º.
Ø3.50mm
Ø4.50mm Ø5.70mm
Prótesis atornilladas/ Screwed prosthesis
Pilar calcinable Plastic abutment
Hexagonal Circular
EKC35H EKC35REKC45H EKC45REKC57H EKC57R
Ø5.70mm Ø5.70mmØ4.50mm Ø4.50mmØ3.50mm Ø3.50mm
ww
w.m
icro
dent
syst
em.c
om
Manual de producto Microdent Ektos 27
Ø3.50mm/ 17º
Transportadores/ Carriers Llave de fijación/ Fixing key Llave de fijación/ Fixing key
Ø4.50mm/ 17º
Ø3.50mm/ 30º
Ø4.50mm/ 30º
Pilar Capitel Mini angulado Angled Mini Capitel abutment
CEKCAPNA35170H0mm
Altura/ Height
UTSNTICPPlataforma standard/
Standard platformUTSNLEC
Plataforma standard/ Standard platform
UTSNLEC51Plataforma ancha/
Wide platform
UTSNTICP51Plataforma ancha/
Wide platform
CEKCAPNA45170H0mm
Altura/ Height
CEKCAPNA35300H0mm
Altura/ Height
CEKCAPNA45300H0mm
Altura/ Height
CEKCAPNA35171H1mm
Altura/ Height
CEKCAPNA45171H1mm
Altura/ Height
CEKCAPNA35301H1mm
Altura/ Height
CEKCAPNA45301H1mm
Altura/ Height
Hexagonal
Importante/ Important*El pilar Capitel Mini angulado se suministra con el tornillo de retención UTSNATR18 y el posicionador PACN (ver página siguiente). • Hacer uso del posicionador PACN para facilitar la operativa de fijación en la posición deseada del pilar Capitel Mini angulado. • No exceder un par de atornillado de 30 Ncm para la fijación del tornillo del pilar. En las pruebas de laboratorio se recomienda un par de 10/15 Ncm. • Se recomienda para la fijación del aditamento en clínica el uso de tornillos que no hayan sido utilizados en las pruebas de laboratorio. • No exceder un par de atornillado superior a 15 Ncm en el caso del tornillo de retención protésica.
*Provided together with UTSNATR18 retention screw and PACN carrier (see next page). • Use the PACN carrier to fix the angled Mini Capitel abutment to its desired position.• Do not exceed a torque of 30Ncm for the fixation of the abutment. For laboratory tests, the torque recommended is 10/15Ncm.• It is recommended to not use the same screws as in the laboratory tests to fix the abutment but to use new ones.• Do not exceed a torque of 15Ncm for prosthetic retention screw.
PACNPosicionador/
Carrier
UTSNATR18Tornillo de retención/
Retention screw
Componentes para el pilar Capitel Mini angulado/ Angled Mini Capitel abutment components *Estos dos componentes se suministran en conjunto con el pilar Capitel Mini angulado./ * These two components are supplied in the set with the angled Mini Capitel abutment.
Componentes para el pilar Capitel Mini/ Mini Capitel abutment
Microdent Ektos product manual28
Aditamentos pilar Capitel Mini y Capitel Mini angulado Mini Capitel and angled Mini Capitel abutment components
UTSNCP51Cofia/ Coping
UTSNPS4XSobrecolado/
Overcast
UTSNPP4XProvisional/ Provisional
UTSNTCA4XTransferidor/
Transfer
UTSNTCA51Transferidor/
Transfer
UTSNCP4XCofia/ Coping
UTSNPS51Sobrecolado/
Overcast
UTSNPP51Provisional/ Provisional
UTSNPCI4XCarga inmediata/
Immediate loading
UTSNPCI51Carga inmediata/
Immediate loading
UTSNSC4XSemicalcinable/
CrCo plastic abutment
UTSNSC51Semicalcinable/
CrCo plastic abutment
UTSNPC4XCementable/Cementable
coping
UTSNPC51Cementable/Cementable
coping
UTSNRI4XRéplica/Analog
UTSNRI51Réplica/Analog
UTSNTRTornillo de reten-ción/ Prosthetic retention screw
UTSNTR51Tornillo de reten-ción/ Prosthetic retention screw
UTSNCC4XCalcinable/
Plastic coping
UTSNCC51Calcinable/
Plastic coping
UTSNTCC4XTransferidor/
Transfer
UTSNTCC51Transferidor/
Transfer
UTSNTUCA4XTornillo de retención/ Prosthetic retention
screw
UTSNTUCA51Tornillo de retención/ Prosthetic retention
screw
Plataforma standard/ Standard platform
Toma impresiones, cubeta cerrada/ Closed tray impression taking
Toma impresiones, cubeta cerrada/ Closed tray impression taking
Toma impresiones, cubeta abierta/ Open tray impression taking
Toma impresiones, cubeta abierta/ Open tray impression taking
Plataforma ancha/ Wide platform
ww
w.m
icro
dent
syst
em.c
om
Manual de producto Microdent Ektos 29
Prótesis sobrecoladas/ Overcast prosthesis
Importante/ Important• Características del pilar semicalcinable: - Material: Según norma ASTM F-1537 / ISO5832-12. - Intervalo: 1300º sólido 1400º líquido. - Temperatura de colado: 1550º. - Coeficiente de expansión térmica: 25-500º aproximadamente. - Dureza: 320HV Autoendurecimiento. • No sobrecolar con metales que requieran un punto de fusión superior a 1550º. • El pilar se acompaña en su envase del tornillo de retención EKTRHC (ver pág. 23). • No exceder un par de atornillado superior a 15 Ncm para el tornillo de retención de la prótesis. • Se recomienda para la fijación del aditamento en clínica el uso de tornillos que no hayan sido utilizados en las pruebas de laboratorio. • El tallado del pilar no debe exceder una longitud de 5mm desde la parte superior del pilar para no perder la retención.
Overcast cylinder characteristics:- Material: in accordance with ASTM F-1537 / ISO5832-12 standard.- Interval: 1300° solid 1400° liquid.- Casting temperature: 1550°.- Coefficient of thermal expansion: 25-500° approximately.- Hardness: 3320HV self-hardening.• Do not cast it with metals which require a melting point higher than 1550º.• Supplied with EKTRHC retention screw (see page 23).• Do not exceed a torque of 15Ncm for prosthetic retention screw.• It is recommended to not use the same screws as in the labora-tory tests to fix the abutment but to use new ones.• The abutment cut cannot be larger than 5mm measured from the upper part of the abutment in order to avoid losing retention.
Importante/ Important• Indicado para corregir angulaciones de hasta 25º. Se utilizan para prótesis definitivas mediante la técnica de sobrecolado.• Specially indicated to compensate angulations up to 25º. Used for final prosthesis with the casting technique.
Pilar semicalcinableCrCo plastic abutment
Pilar semicalcinable orientableAdjustable CrCo plastic abutment
Hexagonal
Hexagonal
Circular
Circular
CEKSC35H
CEKSCO35H
CEKSC35R
CEKSCO35R
CEKSC45H
CEKSCO45H
CEKSC45R
CEKSCO45R
CEKSC57H
CEKSCO57H
CEKSC57R
CEKSCO57R
Ø5.70mm Ø5.70mmØ4.50mm Ø4.50mmØ3.50mm Ø3.50mm
Ø5.70mm Ø5.70mmØ4.50mm Ø4.50mmØ3.50mm Ø3.50mm
Microdent Ektos product manual30
Ø3.50mm
Ø4.50mm
Sistema de retención Osscilia Osscilia retention system
CEKOSS35000mm
Altura/ Height
CEKOSS45000mm
Altura/ Height
CEKOSS57000mm
Altura/ Height
CEKOSS35011mm
Altura/ Height
CEKOSS45011mm
Altura/ Height
CEKOSS57011mm
Altura/ Height
CEKOSS35022mm
Altura/ Height
CEKOSS45022mm
Altura/ Height
CEKOSS35033mm
Altura/ Height
CEKOSS45033mm
Altura/ Height
CEKOSS35044mm
Altura/ Height
CEKOSS45044mm
Altura/ Height
Importante/ Important• Los teflones se identifican por colores en función de su fuerza retentiva:- Teflón negro: suministrado con una cofia metálica, presenta una retención suave perfecta para pruebas clínicas y de laboratorio. - Teflón blanco: presenta una retención media muy apropiada para mantenerse estable un largo periodo de tiempo. - Teflón rojo: presenta una retención fuerte, usado en aquellos casos que requieren una fijación extrema. • El intercambio de los teflones se realiza mediante el uso del destornillador MC220PB.• Retention levels are identified by coloured plastic caps depending on their retention strength: - Black plastic retainer: supplied with embedded metal cap, it has a soft retention useful for clinical or laboratory tests.- White plastic retainer: it has a medium retention, very appropriate when long-time stability is required.- Red plastic retainer: it has a strong retention, used in specific cases where extreme fixation is required.• The key for the Osscilia retainers is MC220PB.
15º15º
Importante/ Important• El eje Osscilia se acompaña en su envase con el conjunto de teflones.• Se requiere el uso del destornillador hex 1.20 para la fijación del producto respecto al implante. • No exceder un par de atornillado de 30 Ncm. • No superar una disparalelización máxima respecto a la vertical de 15º.
• Supplied with retainer set.• Requiered the use of a 1.20mm hexagonal screwdriver to fix the implant.• Do not exceed a torque of 30Ncm.• Do not exceed a maximum non-parallelization of 15° from the vertical.
MC220PBDestornillador
de teflones/Osscilia retainer
screwdriver
SUTGTOSSTransferidor/
Transfer
MSGNEOSSRI35Réplica/ Analog
Componentes/ ComponentsCSUTGOSS
SUTGCMCofia metálica/
Metal cap
SUTGTFSTeflón/ Plastic
retainer
SUTGTFMTeflón/ Plastic
retainer
SUTGTFFTeflón/ Plastic
retainer
Conjunto de teflones/ Retainer set
Material: titanio grado 5 + POM/ Material: titanium grade 5 + POM
Ø5,70mm
Prótesis sobredentaduras/ Overdenture prosthesis
ww
w.m
icro
dent
syst
em.c
om
Manual de producto Microdent Ektos 31
Sistema de retención Micro-Loc Micro-Loc retention system
*Para más información consulte nuestra guía Micro-Loc./ * For further information, please check the Micro-Loc guide.
Micro-Loc presenta cinco tipos de retenedores diferentes intercambiables codificados por colores. Los diferentes niveles de retención respecto al pilar permiten adaptar la retención de la prótesis a las necesidades particulares de cada paciente.
Micro-Loc has five different types of interchangeable colour coded retainers. The different colours denote different retentive strengths with regards to the abutment and enable different retentions of the prothesis based on patient’s requirements.
SUTGTSL EKSLRI35 EKSLRI45 EKSLRI57SLTM
Cofia/ Metal cap Suave/ Soft *Suave Lab/ Soft LabMedia/ Medium Fuerte/ Strong Extrafuerte/ Extrastrong
SUTGSL SUTGRS SUTGRM SUTGRF SUTGREF SUTGRL
*El retenedor Suave Lab es exclusivo para uso en laboratorio./ *Soft Lab retainers are only for laboratory use.
El conjunto Micro-Loc también incluye un dique de goma protector./ The Micro-Loc set also includes a protective rubber dam.
Retenedores/ Retainers
Componentes/ Components
Toma impresiones/Impression taking
Llave Locator/Micro-Loc Key
Réplicas/ Analogs
CEKSL35000mm
Altura/ Height
CEKSL45000mm
Altura/ Height
CEKSL35011mm
Altura/ Height
CEKSL45011mm
Altura/ Height
CEKSL35022mm
Altura/ Height
CEKSL45022mm
Altura/ Height
CEKSL35033mm
Altura/ Height
CEKSL45033mm
Altura/ Height
También disponibles para plataforma Ø5.70mm en alturas de 0mm y 1mm./ Also available for Ø5.70mm platform in different heights: 0mm and 1mm.
*Sección de la cofia con el retenedor extrafuerte en un pilar Micro-Loc sobre un implante Ektos./ * Section of a metal cap with an extra-strong retainer mounted onto a Micro-Lok abutment and into an Ektos implant.
Ø3.50mm
Ø4.50mm
Microdent Ektos product manual32
El modelo SurgicPro de NSK dispone de un micromotor más luminoso y ligero con LED. Es un sistema compacto, elegante y totalmente integrado que incorpora la exclusiva calibración avanzada de la pieza de mano (AHC) y garantiza una velocidad y control de torque precisos. También dispone de un sistema de almacenamiento de datos.
The NSK SurgicPro model has a brighter and lighter micromotor with LED. It is a compact, stylish and fully integrated system that incorporates an exclusive advanced calibration of the handpiece (AHC) and guarantees a precise speed and torque control. It also has a data storage system.
El modelo más reciente en la gama de VarioSurg mantiene el peso ligero y el diseño delgado de la pieza de mano pero tiene un 50% más de potencia que el modelo anterior. Las funciones de retroalimentación y ajuste automático, combinadas con una amplia gama de puntas, aseguran tratamientos más rápidos y precisos.
The latest model in the VarioSurg line keeps the light-weight and the thin design of the handpiece but with a 50% more power than its predecessor. The feedback and automatic adjustment functions combined with a wide range of tips ensure faster and more precise treatments.
Motor de cirugía SurgicPro de NSK/ NSK SurgicPro surgical engine
Motor de cirugía VarioSurg de NSK/ NSK VarioSurg surgical engine
• Torque hasta 80 Ncm/ Torque up to 80 Ncm• Velocidades de 200 a 40.000min-¹/ Speed spectrum between 200 and 40.000 min-¹• Micromotor ligero/ Lightweight micromotor• Iluminación LED/ LED light• 8 programas/ 8 programmes• Durabilidad/ Durability• Esterilizable en autoclave/ Sterilizable in autoclave• Pantalla LCD/ LCD screen• Almacenamiento de datos/ Data storage system
• Luces LED regulables/ Adjustable LED light intensity• Mayor impulso/ Bigger impulse• Pantalla LCD/ LCD screen• Modo ráfaga/ Burst mode• 9 programas/ 9 programmes• Modo de autolimpieza/ Self-cleaning mode• Retroalimentación/ Feedback function• Función Dynamic Link/ Dynamic Link function• 3 modos (cirugía, endodoncia, periodoncia)/ 3 modes (surgery, endodontics and periodontics)
Aplicaciones: cirugía oral, implantología.Applications: oral surgery, implantology.
Aplicaciones: cirugía ósea, elevación de seno, extracción, preparación del implante. Applications: bone surgery, sinus lift, extraction, implant preparation.
Motores de cirugía Surgical engines
ww
w.m
icro
dent
syst
em.c
om
Manual de producto Microdent Ektos 33
Importante/ Important• Las puntas se pueden intercambiar, posibilitando el uso de diferentes medidas de destornilladores. • Estos nuevos destornilladores permiten al profesional simplificar su stock de herramientas. El mango largo DPIL puede utilizarse extraoralmente.
• The tips can be easily interchanged, which makes possible to use different sized screwdrivers.• These new screwdrivers enable professionals to simplify their stock of tools. Due to its long handle, the DPIL screwdriver can be used extra-orally.
(*) También sirven como puntas de los destornilladores intercambiables./ They can also be used as tips for interchangeable tip screwdrivers.
Destornilladores Screwdrivers
SUH120RC
DPIC
SUH120RL
MH120C
ATDPI
MH120L
*DC120HC
DPIL
*DC120HL
DL120HC
DL120HL
Rotatorio para cirugíaRotary for surgery
Rotatorio para cirugíaRotary for surgery
RotatorioRotary
Fijo de prótesisFixed prosthetic
Para llave dinamo-métrica y de carraca
For torque and ratchet spanner
Fijo de prótesisFixed prosthetic
Para contra ánguloFor contra angle
ProtésicoProsthetic
Para contra-ánguloFor contra angle
Para llave carracaFor ratchet spanner
Para llave carracaFor ratchet spanner
Destornilladores cortos/ Short screwdrivers
Destornilladores largos/ Long screwdrivers
Destornilladores de puntas intercambiables/ Screwdrivers with interchangeable tips
Microdent Ektos product manual34
Atención al clienteEl teléfono de atención al cliente es el 902 402 420 en horario de Lunes a Jueves de 09h a 18h. Viernes de 08h a 15h ininterrumpidamente.
Realización de pedidos• Por teléfono en el 902 402 420, extensión 1 (pedidos).• Por fax al nº 93 844 76 93.• Por e-mail a [email protected].• A través de la página web: www.microdentsystem.com.• Al delegado comercial de su zona.
Plazos de entregaEntrega antes de las 19h del día siguiente para pedidos realizados antes de las 14h (Península). Entrega en 24-48h para pedidos realizados antes de las 14h (Islas Canarias).Consultar opción entrega Interdías (disponible sólo para provincia de Barcelona).
Expedición de productosSiempre para pedidos realizados antes de las 14h.Díganos el horario elegido al realizar su pedido:• Servicio 08.30h.• Preferente: entrega de 08.30h a 10h.• Express: entrega de 10h a 13h.• Servicio 19h: entrega antes de las 19h. (Horario por defecto).• Urgentes, los pedidos realizados fuera de horario (por la tarde) tienen un recargo de 10€.
*Disponible para toda la península. Consultar para Canarias.
DevolucionesNo se admitirán devoluciones transcurridos 30 días de la recepción del material.Todas las devoluciones de material deberán ir acompañadas del impreso de devolución de productos debidamente cumplimentado y adjuntando una copia del albarán de entrega.
Facturación y forma de pagoDomiciliación bancaria a 30 días fecha factura.Consultar otras modalidades y facilidades de pago a nuestro departamento de atención al cliente o al delegado comercial de su zona.
* Microdent se reserva el derecho de hacer cualquier modificación sin aviso previo.
Customer serviceTel. 0034 - 93 844 76 50 from Monday – Thursday: 9h-18h and Friday: 8h-15h.
Purchase order• Tel. 0034 - 93 844 76 50, extension 1.• Fax: 0034 - 93 844 76 93.• E-mail: [email protected].• Webpage: www.microdentsystem.com.
Delivery timesPeninsula: Orders placed before 14h will be delivered on the next business day. Canary Islands: Orders placed before 14h will be delivered on the next 24-48 h. Province of Barcelona: consult about same day deliveries.
* For deliveries outside Spain, please contact us.
Shipping policyThe following shipment methods are available for orders placed before 14h:• Service 8.30• Priority: delivery between 8.30h and 10h.• Express: delivery between 10h and 13h.• Service 19h: delivery before 19h.• Urgent: delivery time out of the established timetable (in the evening) has an extra charge.
* Available for the Peninsula (for Canary Islands, please contact us).* For deliveries outside Spain, please contact us.
Product return policyAll returns must be accompanied by the return form, duly completed, and a copy of the delivery note.Any returns or refunds of items that have been opened, tampered with or not in their original condition will not be accepted.
Billing and payment methodsAsk our customer service or your local representative about different payment plan options.
* Microdent reserves the right to improve, modify or discontinue products and equipment at any time without incurring any obligation or without prior notice. * For commercial schedules and deliveries outside Spain, please ask about conditions by country.
Dise
ño y
maq
ueta
ción
:
20
16
ImportanteEl uso de aditamentos no suministrados por Microdent puede comprometer la estabilidad y fijación de la prótesis así como provocar situaciones de aflojamiento o fractura. Además provoca la pérdida de garantía de nuestros implantes.
ImportanteThe use of foreign-brand surgical instruments may compromise the stability and fixation of the prosthesis, as well as cause situations of loosen-ing or fracture. Moreover, it also voids the product warranty.
ww
w.m
icro
dent
syst
em.c
om
Manual de producto Microdent Ektos 35