sip presentation presentationppt.pdf · title: sip presentation.ppt author: david edwards created...
TRANSCRIPT
-
Building Homes with SIPSBuilding Homes with SIPS
David Edwards, Ph.D.Earth Bound Construction
-
Residential SIP ConstructionResidential SIP Construction
1. The Structurally Insulated Panel2. Why build with SIPs3. When and when not to build with SIPs in
Residential Construction4. Common details found in SIP structures5. Assembly of SIPS as walls and roofs6. Installation requirements for SIP structures7. Care of SIPs
-
The Structurally Insulated Panel(SIP)
The Structurally Insulated Panel(SIP)
• The Indigestible mega sized Ice cream sandwich• Sandwich of two sheets of 7/16” to 1/2” OSB with
a polystyrene(R 3.8/in) or Polyurethane(R 6.7/in)• Panel dimensions based on infill with KD
lumber(6 in. panel is 6 1/2” thick and contains 51/2” of insulative foam) 5.5 x 3.9 = 21.45
• OSB is phenol-formaldehyde adhesive(ext. ply)and is a source of formaldehyde, but below HUDlisting requirements for H2CO source
• Burning PS evolves CO, CO2 and H2O• Fire resistive - 15’ with 1/2 sheetrock, 1hr. with
5/8” type C sheetrock or two layers 5/8” type X
-
The Strength of a SIPThe Strength of a SIP
-
Why Build With SIPsWhy Build With SIPs
• Energy efficiency(R13.7 vs. R21.7 = ∆58%) DOE• Speed of Installation• Quality of Installation• Consistency of materials• Quality of finished product(sound, energy,
finish(in and out)• Strength of structure• Material conservation• No HFCs, CFCs or HCFCs
-
When to Build With SIPSWhen to Build With SIPS
• Custom homes or large projects• Timeliness is not the priority• Highest efficiency home is the priority• All of Crew is not highly skilled(simple structures
only)• Simple roof structures• Vaulted ceilings preferred throughout house• Steep sloped roof structures• Site located in Noisy area/client sound sensitive• Very cold areas• No anticipated window, door or structural changes
-
When Not to Use SIPsWhen Not to Use SIPs
• When time is of the essence(2+3+4=?#!%#*)• Complicated roof structures• Windows, doors, Hardy frames or steel frames
break up wall to much• Curves• Small Jobs• Lots of tie-in to existing structures, irregularities• Uneven foundations or floors• Slab-on grade with flat roofs• Indecisive client, layout is still evolving• Anything unknown
-
Wall Panels - OverviewWall Panels - OverviewGable Wall
Point load No point load
-
SIP DetailsWindows and Doors
SIP DetailsWindows and Doors
-
Wall Panel Detail - FloorWall Panel Detail - Floor
Sill Connection Floor to floor
-
SIP Wall HeadersSIP Wall Headers
Wrapping openings Insulbeams
-
SIP Details - Infilling PanelsSIP Details - Infilling Panels
Lumber Splines I-Joist
-
Wall Panel at Roof - DetailWall Panel at Roof - Detail
Flat Wall/Bevel in-fill Beveled wall top
-
Wall Panel Detail - CornersWall Panel Detail - Corners
90° corner Angled corner
-
Wall Panel Detail -Holddowns
Wall Panel Detail -Holddowns
HD type Strap Type
-
SIP Details - Slab ConnectionsSIP Details - Slab Connections
Capillary Breaks Required
-
SIP Details - Floors and RoofsSIP Details - Floors and Roofs
Ledgers must beadded to supportbottom flange ofpanels
-
SIP DetailsConnecting Interior Walls
SIP DetailsConnecting Interior WallsScrews through panels
anchor interior wall topanels required withsingle top plates
With two top plates,overlapping plates isthe most secureinterconnection method
-
SIP DetailsRoof Structure and Openings
SIP DetailsRoof Structure and Openings
Opening must besmaller than 4’ oradditional structurerequired to supportpanel loads
Structural infill bears onridge and outside walland spans from ridgeto eave
-
Roof Panel Detail - RidgeRoof Panel Detail - Ridge
Low Slope Ridge 12/12 Ridge
-
Roof Panel Detail - ValleyRoof Panel Detail - Valley
Valley Detail
-
Roof Panel Detail - EavesRoof Panel Detail - Eaves
Plumb, Square and Soffitted Eaves
-
Wall Panel Detail - ElectricalWall Panel Detail - Electrical
Chases through panels Retro boxes
-
SIP Panels CareSIP Panels Care
• Store Panels Flat and covered• Do not lift by top skin• Do not drop panels• Protect from rain
-
SIP Panels Install RequirementsSIP Panels Install Requirements
• Support both skins on wall panels• Drill electrical chases in top and bottom of panels• Panels cannot sit on concrete without capillary
break(p.t. lumber between concrete and panel edges)• No Plumbing in wall panels• Always install SIP panel tape at all joints• Foam all penetrations• Vapor Barrier in cold climate residential
applications req.• Mechanical Ventilation req.