sip-based-dect rev1.9 25 feb., 2013. 2 table of contents 1. overview 2. specification and features...

SIP-Based-DECT

Rev1.9 25 Feb., 2013

2

Table of Contents

1. Overview

2. Specification and Features

3. Air Synchronization 　4. Registration 1. Installation Basic Flow 2. CS radio zone design 3. CS/PS Firmware Update 4. Setup CS/PS and NS1000 5. Maintenance of System phone book

Appendix

- PS Ring Group-Air Synchronization -Move CS -Site Survey (Tool)-Site Planning (Tool)

- PS function List

3

Chapter 1

Overview

4

1. Overview (Why SIP-Based DECT)

LANLAN

No separate server or GW is required with NS1000, Offer high-quality Business Communication, with most Reliable DECT Technology.

Spec.

Radio technology DECT 　VoIP signaling SIP

Number of Handsets Max. 255 handsets *1

Number of CS Max. 128 CS

Max. 32 CS/8Air sync group

CS synchronization Air synchronization

Handover Yes (seamless)

Cell StationCell Station

In Expensive Wireless solution with SIP based DECT solutionHigh Quality Voice with Noise reduction Dramatically Reduce Wire installation cost in large service area.Easy install and maintenance with Firmware Air-download

5

1. Overview (Hand Over)

<Cell Station>

SIP based DECT phone satisfies needs of personnel who want to be always ready to talk to partners or customers anywhere and anytime within their company.

<PS> <PS>

<Cell Station>

<PS> <PS>

NS1000

Hand Over

6

PS can be reception which is located anywhere.The whole building becomes the communication zone.

Multi Zone

Features and BenefitsOffice

StorageMeeting Room

Hallways

Hand-over

Suitable Environments

Frequent moving about inside the company

On-site employees: efficient because it is not necessary to return to the office to make a call.

Call receptionists: less trouble because the person to transfer the call to can be anywhere.

Customers: improved CS because there is less time spent waiting to transfer calls.

Retail Store

Automotive Dealership

Factory

1. Overview

7

Move to other System/LocationPS can be moved from original site to the other site.

<Cell Station-1->

IP

<Cell Station-2->

Slave UnitsMaster Units

<PS201> <PS301>Move with PSto other site

In this condition, the PS must be resisted to other unit also

PS can be resisted up to 4 different Cell Station (Need to regist NS1000 also)

1. Overview

8

Chapter 2

Specification and Features

9

US/CANADA Model

EU Model

- High quality wideband voice

- Noise reduction

-Full-duplex hands free 　

-Air-download of firmware

- Headset jack (2.5mm plug)

- Vibration

- Up to 500 personal phonebook


KX-UDT111

Portable Station (Standard Model)

10

US/CANADA

*LCD back light off and Bluetooth is not in use.

*Future



- Noise reduction


- Air-download of firmware

- Headset jack (2.5mm plug)

- Vibration


- Bluetooth （ Version 2.0, Class 2 ）(Headset/Phonebook transfer ）

Portable Station (Slim & Light Model)

KX-UDT121

EU Model

11

*LCD back light off and Bluetooth is not in use.

*Future



- Noise reduction



- Vibration

- Against Hazard LevelIP65 (IEC529)


- Bluetooth （ Version 2.0, Class 2 ）(Headset/Phonebook transfer ）

Portable Station (Taught Model)

KX-UDT131

US/CANADA EU Model

12

- Web interface for set up


- Max PS registration : Up to 255 per CS and System

- The number of Cell Station for a system : Up to 64 or 128 (One Look networking) (32 per air sync group/Max 8 Air sync group per

one Unit, total max 128 Air Sync group on One-Look networking )

- PoE or optional AC adaptor(KX-A239)


*Future

Cell Station

KX-UDS124

13

PS Detail Specification

KX-UDT111 KX-UDT121 KX-UDT131

LCD1.8”, 65,000-color

TFT display1.8”, 65,000-color

TFT display1.8”, 65,000-color

TFT displayLCD Backlit Yes Yes YesBluetooth No Built in Built inVibration Yes Yes YesQuick Charge No （ 10Hours) Yes (3 Hours) 　 Yes (3 Hours)

Talk Time12h (Narrow band)

9h (Wide band)

14h (Narrow band)

11h (Wide band)

14h (Narrow band)

11h (Wide band)

Stand bay time 200h 200h 200h

DECT Encryption Yes Yes Yes

Soft Key 3 3 3Size (HxWxD) 146.3x48x25.4 mm 127.5x48.5x18 mm 152 X 55 X 23mmWeight 115g 90g 150g

BatteryAAA-Ni-MH 2 cell Battery ： Li-ion 3.7V

700mAhBattery ： Li-ion 3.7V

700mAh

EncloseAC Adaptor, ChargerBelt Clip and Holder

AC Adaptor, ChargerBelt Clip and Holder

AC Adaptor, ChargerBelt Clip and Holder


14

CS Detail Specification


Model No. KX-UDS124

Type 4ch wideband audio CS

Max. simultaneous calls 4

Wideband Audio Yes

Power supplyPoE (IEEE 802.3af)

AC adaptor （ optional ）

CODEC (IP) G.722, G.711, G.729a

LAN port 10 base-T / 100 base-TX

Firmware upgrade Yes

DECT Encryption Yes

Seamless Handover Yes

Size 190×133.9×39.3 mm

Weight 330g (Include wall mount adaptor)

15



LED indication on CS

LED Display Status

OFF Power Off / CS software downloadGreen ON Standby (no active calls)Slow Green Flashing Talk (active calls)Moderate Green Flashing Busy (All talk path are occupied)Red ON Fault (FLASH ROM Can not access etc.) Slow Red Flashing OUS or Start up (data link establishment air synchronization)

Moderate Red Flashing Start up (power on data link establishment)Amber ON Standby: unstable synchronization (no active calls)Slow Amber Flashing Talk: unstable synchronization (active calls)Moderate Amber Flashing Busy: unstable synchronization *

Moderate (Red ->Green->Yellow) Flashing Detect Rest Switch on Power On Status (Open CS-Web port)Red and Green alternate flashing Master-CS indication on Site survey mode. LED indication for

Slave CS on Site survey mode is follow. - Green Flashing :Synchronizing - Amber Flashing :Weak radio signaling level - Red Flashing : Out of area

Note) LED flashing patterns are as follows: Slow Flashing: 60 times per minute Moderate Flashing: 120 t60INT-2 Green Flashing/per minute

Note) LED flashing patterns are as follows: Slow Flashing: 60 times per minute Moderate Flashing: 120 t60INT-2 Green Flashing/per minute

16



Error Indication and how to recover

17

System Capacity


System Capacity

StandAloneStacking system Networking

Main One Slave Two Slave

Extension 640 640 1000

IP 640 640 1000

PS(UDS1XX) 255 255 255

Legacy 2 0 36/96/128/240(*1) 72/192/256/480 (*2) 1000

SLT 2 0 36/96/128/160(*1) 72/192/256/320(*2) 1000

DPT 0 0 36/96/128/160(*1) 72/192/256/320(*2) 1000

CS (pcs) 64 64 128

CS-IF (4/8)Card 0 0 4 8 16

DPT-CS 0 0 11/32/32/32(*1) 22/64/64/64(*2) 128

IP-CS 64 64 128

SIP-CS(UDS124) 　　　　　　　　　

64 64 128

PS 　 (WT/TCA) 512 512 512

*1: MM/NN/XX/YY means One NCP/One TDE100-TDA100/OneTDE200-TA200/OneTDE600-TDA600*2: mm/nn/xx/yy means Two NCP/Two TDE100-TDA100/TwoTDE200-TA200/TwoTDE600-TDA600

18

2. Specification and Features (Cover Area)

Gray Zone:Conversation will be intermittent

A

B

C

Coverage Area: (About 50m to 60m)

A

Good Coverage Area: (About 30m to 40m) Good sound quality can be maintained.

Out of Service: Cannot make/receive calls.

C

B

CS Coverage Area for Establishing Conversation Using PSs

19

2. Specification and Features (Easy Installation)

Site Survey for Air Synchronization

SIP-CSs have ability of site survey to check radio signal strength.By the LED on SIP-CS, you can check the radio signalSIP-CSs have ability of site survey to check radio signal strength.By the LED on SIP-CS, you can check the radio signal

1. Set Temporally master CS for site survey as planned - Power on CS with pressing rest SW . - Release Reset switch while LED flashes (Green/Red/Amber) - Press Rest Switch one second once again (Green and Red LED start flashing)2. Turn on Power of slave CS and locate it, then check LED on CS.3. Move Slave until LED on Slave CS goes greenSee Appendix in more detail

20

Site Survey for S-PS Service Area

The PS has a PS AREA CHECK abilityUser can confirm CS cover area easily by this functionThe PS has a PS AREA CHECK abilityUser can confirm CS cover area easily by this function

1. Power ON CS and set Maintenance mode2. Change PS to PS AREA CHECK mode3. Make call from PS to PS

See Appendix in more Detail

2. Specification and Features (Easy Installation)

21

Clear & Natural voice by Wideband Audio. Multi Handsets and Multi-Cell supported.

Better Receiving Frequency ResponseBetter Receiving Frequency Response

Narrow Band (G.711)

Wide Band (G.722)

Human voice Range

Enhance the High frequency by aperture rate of the receiver

aperture rate 24.5 %

aperture rate4.3 %

Enhance the Lower frequency with small receiver

EnhanceEnhance

UDT111

aperture rate 35 %

UDT121previous model

(Panasonic PBX terminal)

U P


Wideband Audio Support

22

Detect and reduce noise part from the transmission voice

Dynamic receiving volume control according to acoustic ambient noise characteristics

Noise reduction

Noise

Voice

High noise 　 High volumeLow noise 　　 Normal volume

Noisesound

Noisesound

TX : Noise Reduction for Sending Signal

RX : Listening Enhancement for Receiving Signal

Can configure TX/RX noise reduction to ON/OFF during standby and talk (Default : OFF).

2. Specification and Features (Pattern1)

Noise Reduction features

Waiting Demo Voice file ***

23

Strong against the multipath environment by the enhancedprecision of error detection and new voice processing technology.

Fading

Example

[Time]

Old

New

Voice waveform

Received RF powerat cordless handset under multipath environment.

Multipath

The fading occurs when moving the place where the electricwave is strengthened or weakened each other under multipath environment.

Error

FreqLow

High Less

Error

CS

PS

Ex) cubicle farm, concrete building

occurrence multipath by direct/reflected/diffracted wave, etc

PanasonicTechnology

Advanced error correction makes stable communication.

Proprietary Process

Directwave

Diffractedwave

Reflected wave

2. Specification and Features (Pattern1)

Noise Reduction features

24

CONCAVE

-Shape to avoid operation mistake in the pocket- Shape to protect keys-Concave shape and rippled keys for easy access to keys 3 Soft keys

Navigation key

1.8inch Color LCD with backlit

Receiver

Headset Connection

Microphone

aperture rate 35.0%(UDT111)

aperture rate 4.3%(previous model)

U P

Enhance aperture rate Large Ringer / Charge LED

Key backlit

Belt clip hole

Wall mountable charger

Strap hole1

Strap hole2

KX-UDT111 Appearance


25

3 Soft keys

Navigation key

1.8inchColor LCDwith backlit

Receiver

HeadsetConnection

Microphone

aperture rate 24.5%(UDT121)

aperture rate 4.3%(previous model)

Enhance aperture rate

（ 90g ）（ 48.5 ｍｍ）

（ 127.5 ｍｍ）

（ 18 ｍｍ）

Pocket size

Plating Grill Section keys

U P

Ringer / Charge LED

Wall mountable charger

Belt clip hole

Key backlit

Strap hole1

Strap hole2

KX-UDT121 Appearance


26

Chapter 3

Air Synchronization

27

3. Air Synchronization

Handover is available

Handover is not Available

Air Synchronisation

Air Synchronisation

LAN i/f L2 SW

Handover is not Available

SynchronisedBy Air Synchronisation

To activate Handover through CS, all CS must be synchronized.CSs are synchronized by using “Air Synchronization” for same air Sync. groupAfter CS synchronized with other CS, Handover is available.

CS (Master)

CS (Slave)

CS (Slave)

Air Synchronization

28

Gray Zone:Conversation will be intermittent

A

B

C

Coverage Area:Radio signal strength level is between “03” (about 50m to 60m)and “14” (about 20m to 30m).

A

Good Coverage Area:Radio signal strength level is between “05” (about 40m to 50m)and “14” (about 20m to 30m).Good synchronisation quality can be maintained.

Out of Service:0m to 3m or the radio signal strength level is “00 to 02”.Cannot be synchronized.

C

B

3. Air Synchronization

You must not install SIP-CS without site survey.

C

CS Coverage Area for Air Synchronization between CSs

29

Chapter 4

Registration

30

Following is Step for SIP based DECT system registration

Step for DECT System Installation

4. Registration

Step1: Site Planning

Step3:CS Registration into Master CS （ By CS-web)

Step4: TreeSurvey

Step2:Step up Terminal Type

Step1: Local firm Update

1) Instauration Basic Flow

Step2: Site Survey

Step3: Entry CS/PS name and FF-Key

Step4: Entry CS and PS extension Number)

2) CS Radio Zone Setting (Site Survey)Step0: Initialing CS

3) Firmware UP date

Step1:Virtual Extension (UT) Install

4) Set up CS/PS and NS1000

31

Continue

Step for DECT System Installation

4. Registration

Step8: Set up Slave CS

Step6: Set up System information URL

Step7: PS registration

Step5: Set up Master CS


Step9: Set up Master CS of other Air sync group

Step10: Set up Slave/Master CS to NS1000 (For Ring group)


32

3. Setup CS/PS and NS1000 3-1. NS1000 setting by Web-MC 3-2. Super Master CS setting by CS-Web 3-3. PS registration

4. Maintenance of System phone book

1. CS radio zone design (Site Survey) 1-1. Site Planning 1-2. Site Survey 1-3. CS Registration into Master CS （ By CS-we

b ） 1-4. Tree Survey

5. PS Ring group setting (see Appendix)

4.1. Installation Basic Flow

Basic Flow how to set up CS/PS and regist to NS1000

2. Firmware Update 2-1. Manual Update

33

Before CS/PS registration, following process must be done

Step0: Initialize CS for Before Registration

4.2. CS Radio Zone setting

1. Initialize CS

2. Open CS-Web interface

1. Depress RESET Switch while CS is

power on 　（ See Note ）2. Keep pressing RESET Switch 10 sec.

And wait around 60sec until LED turn

on red

When you use CS very first time, you do

not need to initialize

Note ： You need wait until LED on the

　　　　 CS will start blinking RED or Stay

Red when you initialize CS

See next page how to initialize CS by Web

1. Depress RESET Switch and turn on

CS power

2. Keep pressing RESET until LED

blink amber/red/green

34

Step0: Initialize CS by CS-Web

4.2. CS Radio Zone setting 　

You can initialize CS by CS-Web interface

Default Web Address(192.168.0.241)

CS-Web

For CS and PS registration, need to set up Super Master CS

1) Open CS-Web (See previous page)2) Access CS-Web (Default Web address is 192.168.0.241)3) Go to Maintenance menu then proceed Factory Reset4) Then CS will be initialized and LED on CS will start RED blinking

LOGIN

CS

Note: *1 To enable CS-Web function, need to proceed power on with reset SW (See Page 28)

　　　　 Login/Password : For Installer instoperatoruserid/instpass, For Customer

admin/adminpass

35

Step1: Site Planning

4.2. CS Radio Zone setting 　

- Site planning tool (Excel) Local PC PBX Support Page of CS-Web

1. 　 Down Load

1) Download Site planning tool (Excel) from PBX Support Page of CS Web Site

2) After you Import site map data to this tool and determine the size scale, you can plan the CS position and check the radio range of CS. (simulate for CS positioning)

Note: Please refer Appendix more in detail

2. Determine size scale

site map data 　（ jpg format)

Import

2. Plan & Check CS position

Plan the CS position by using Site planning tool

36


Step2:Site Survey (1/2)

■ Green OK ■ Amber NG (poor) ■ Red NG (out of range)

LED

Slave

Slave

SlaveSlave

Slave

SyncMastermode

ChangePosition

LED

Locate CS as temporarily position by using LED indication

1) Keep Pressing SW and turn on the CS.2) Release the SW button and depress it again. ⇒ Sync Master mode for Site survey starts.

3) Other CS(s) synchronize to Sync Master CS automatically 4) Check other CS’s LED * Confirm the CS radio status at planning

position5) Change position until being Green LED

6) Depress the SW button again. (return to Slave)6) Depress the SW button again. (return to Slave)

37


Step2:Site Survey (2/2)

Following shows Site Survey status indication and status1. Change to Survey Mode Case 1: Keep Pressing reset SW and turn on the CS.(Master Mote)

Moderate Red Flashing

Red and Green Alternate Flashing

Survey Mode1

Power on CS withPressing reset SW

Release Rest SWAnd depress again

Case 2: Turn on the CS normally. (Slave Mode)

Moderate Red Flashing

Power on CS

2. How to Return Normal Mode from Survey mode Either press Reset SW more than 10 sec, or Power Off CS then Power on CS with pressing Rest SW then change to Fix IP mode then restart CS

Note ： CS must be Fixed IP

Mode

Ex) 192.168.0.241

Survey Mode2

CS will enter site survey mode automatically when receives signal from Master CS

38


Step3:CS registration in to Master CS

CS Registration into Master CS by CS-Web

CS-Web

SuperMaster

SlaveSlave

Slave Slave

2.

3.

4.

3.1.

1. Change “CS Class” from “Slave” to “Master” via CS-Web.2. Push “Start CS Registration” button in CS Management

screen.3. CS(s) that is registered in Super Master are listed up.

1.

39


Step4:Tree Survey

Tree Survey (Auto Air Synchronization) by Super Master CS-Web or PC Tool

Web user interface (Web application)

CS-MT (SIP CS Management Tool)

- For small system- No installation needed

- For mid and large system- Installation is necessary

CS-Web

SuperMaster

Slave1Slave2

Slave3 Slave4 Slave5

. Auto Air Synchronization

1.

3.

1) Push “Start Tree Survey” button via CSWeb.2) System executes auto air synchronization and calculate Tree structure.3) Push “Apply” button.

Note: In case that # of CS are up to 9, PC tool needs to be used for tree-survey.

40

Step1:Update firmware by CS-Web

4. 3 Firmware Update

You can perform the firmware update manually using CS Web programming. After the firmware is uploaded to the Super Master CS, the Super Master CS distributes the firmware to all other SIP-CSs automatically.

You can perform the firmware update manually using CS Web programming. After the firmware is uploaded to the Super Master CS, the Super Master CS distributes the firmware to all other SIP-CSs automatically.

CS-WebUpload new firmwareUpload new firmware

Deliver to all CS Deliver to all CS

Note: You must update CS firmware to V01.200 or later when you use CS under NS1000Note: You must update CS firmware to V01.200 or later when you use CS under NS1000

1. Get in to [Firmware Update].2. Select [Direct] for [Update Mode].3. Select updated firmware4. Click [All Update Firmware].

1. Get in to [Firmware Update].2. Select [Direct] for [Update Mode].3. Select updated firmware4. Click [All Update Firmware].

1.

2

34

41

Click [Setup] select [PBX Configuration] – [1.Configration] – [1.Slot] [Virtual] – [V-UTEXT32]

Step1:Vitrula Extension (UT) install

4. 4 Set up CS/PS and NS1000

42

Set up CS or PS type of Telephone type in Port Property as Master CS/SIP-CS or S-PS

Click [Set-up] - [1.Configlation] - [1. Slot] – [Select Target V-UTEXT32] – [Port property]

Step2: Set up Terminal Type

Note: 1. Telephone Type Setting is

Master CS: Super master CS which is Master CS of Air Sync Group #1

SIP-CS : Master CS of Air Sync Group 2 to 8 and or all slave CS 　 S-PS : PS

2. Only one Master CS can be set per one Unit 　　 3. Do not need to set UP SIP-CS if customer does not need to set up PS-Ringing (ICD-Group Function)


43

1. Enter Name of PS 　 and Extension number


2. Enter FF-Key of PS

Click [Set-up] - [4. Extension] - [1.Wired Extension] - [4. Flexible Button] – [Target PS ]

Note: Set up PS related programming by wired extension setting if needed

Enter PS NameEnter PS Name

Enter FF-Key CodeEnter FF-Key Code

Can be set these

Functions

Can be set these

Functions

Step3: Entry CS/PS name and FF-Key


44

Note: 1.For PS registration, need to assign Super Master CS in Virtual UT extension card But, It will not need AK (Capacity of UT-Extension) for Master CS but need AK for PS

1. Enter Name of CS and Extension number


Step4: Entry CS and PS extension Number


45

Default Web Address(192.168.0.241)

CS-Web

For CS and PS registration, need to set up Super Master CS

1) Login CS-Web (192.168.0.241 as a default) In default setting, CS-Web site is set as 192.168.0.2412) Set up own IP Address In default setting, CS is defined as DHCP mode. If no DHCP server, need to set up own IP address. After IP Address, CS will restart automatically. Better select Static mode on Master CS3) Set CS mode as Mater CS In default, CS mode is set as Slave CS, so need to set CS mode as Master CS . After set Master CS, CS will restart automatically

LOGIN

Note: *1 To enable CS-Web function, need to proceed power on with reset SW (See Page 28)

　　　　 Login/Password : For Installer instoperatoruserid/instpass, For Customer

admin/adminpass

Step5: Set up Master CS

Super Master CS


46

1) Set following URL into System File URL http://192.168.0.101:7580/utdownload/System.cfg

Then, Click All Save.After set up URL, CS will restart automatically.

Note: At this point, configuration data is downloaded into Super Master CS and registrated to NS1000 automatically even if registration mode is [manual] mode in NS1000　　　 Do not enter any other field

NS1000 IP address

In order to download configuration file from NS1000, URL information of Super Master CS for getting the file in NS1000 has to be set by CS-Web.

Step6: Set up System information URL (in Master CS)

Port #


47

PSSuper Master CS

CS-Web

PS has to be registered into Super Master CS by CS-Web as follows:

1) Login CS-Web

2) Select menu of PS Registration.

3) Click Start PS Registration.

4) Select Available PS and move to Selected PS by “>” button.

5) Click Next.

6) Set PS to registration mode and register that to neighbor CS. *registration mode = push button on PS. 　

LOGIN

Regist

Note: 1. Extension Number is downloaded from NS 1000 automatically, and also when change PS

extension number by Web-MC of NS1000, the modification data is also down loaded automatically

2. After regist PS to CS, CS-Web will be closed. After Close CS-Web, can open Web Port by PS setting

Caution: Firmware up process may execute after complete PS registration, during this process you can not

de-registration and also do not power down PS, until complete Firmware version up.

Step7: PS Registration


48

Slave CSSuper Master CS

CS-Web

Slave CS can regist to Super Master CS. Just Set up IP address of Master CS (*) Then proceed CS registration by Super Master CS

Note: If System Mode is set up as DHCP enable, do not need to set up Own IP-Address

LOGIN

Regist

Set up Slave CS IP address Set up Master IP address *

Start CS registration in Super Master CS

CS-Web of Slave CS

LOGIN

CS-Web of Super Master CS

Step8: Set up Slave CS


49

Master CSSuper Master CS

CS-Web

Master CS can regist to Super Master CS 　 Just Set up own IP

address and Super Master IP address *And need to proceed CS registration by Super Master CS

Note: If System Mode is set up as DHCP enable, do not need to set up Own IP-Address When set up different Air Sync Group (Not 1), then need to set up Master IP Address When change any Air setting value, the CS will be restarted automatically

LOGIN

Regist

Set up Master CS IP address Set up Super Master IP address *

Start CS registration in Super Master CS

LOGIN

CS-Web of Master CS

CS-Web of Super Master CS

Step9: Set up Master CS of other Air sync group


50

Super Master CS

CS-Web

When user want to use PS-RING group by NS1000 ICD Group function, Must regist Master CS and Slave CS to NS 1000 as follow

1) Set UP Telephone Type as SIP-CS and Extension Number in Web-MC

2) Set up Extension number of Master CS/Slave CS in CS-Web as same as NS1000 Data

3) Set up Password (1234 as default) in CS-Web

WEB-MC UT-EXT32 Port property

Step10: Set up Slave/Master CS to NS1000 (For Ring group)

Slave CS

LOGIN

Regist


51

Download System Speed Dial data to PS Phone Book

4.5 Phone book registration

Download

Deliver

When System Speed dial of NS1000 is modified, NS1000 will download System Speed dial data to Super Master CS.Master CS will deliver Data to PS /Other Master CS as Phone book data, after complete download.The total number of downloaded data is defined by [Site-Property]

Note: 1. It will take around 40second to deliver Phone book Data. which is same setting for UT. Default is 300 *1 2. PS will show [Downloading PhoneBook ] as download mode as download mode. 3. Download will start when either [Apply] or [OK] ICON is clicked 4. Can not set Tennant group for PS, so basic Speed dial data is shared by all PS *1: It will take around 5 minutes to complete Phonebook transfer as MAX(256 PS is in One Cell Station)

52

Appendix

53

EXT. Status

200 INS

201 INS

300

301

ICD group

Member

600 300, 301

601

NS1000 setting by Web-MC

CS setting by CS-Web

Assign CS extension number in NS1000- Virtual V-UTEXT Port Property

Set ICD group- ICD Group Setting

NS1000 setting by Web-MC

Assign CS extension number in each CS

1 2

3 4 CS setting by CS-Web

Extn.300 Extn.301

PS Index=P001Extn.200

Assign member of PS Ring group in S-Master CS

Index #

Group #

Member

1 600 P001, P002

2

12

PS Index=P002Extn.201

Appendix

PS Ring Group #1 (How to work)

54

1. Assign CS extension number

Extension numbers must be assigned to all CSs in the same way of UT series SIP phones - Setup- PBX Configuration 1.1 Slot - Virtual V-UTEXT Port Property

- Setup-PBX Configuration 3.5.1 ICD Group Setting

2. Set ICD group

Extension number of CSs to cover area for PS ringing need to be set in a ICD group as the member.

Note: About CS registration into NS1000No operation is required for registration into NS1000 like as PS.Registration will be completed automatically when match CS extension number and password on CS with the number on NS1000

Appendix

Set CS number as ICD-G member

Set CS number as ICD-G member

PS Ring Group #2 (How to set up)

55

3. Set CS extension number by CS-webEach CS must assign their extension number for PS ring group. Installer needs to log-in into each CS for this setting.

3-1. How to access to each CSEach CS can be logged in from CS-web of Super master CS as follows:1) Select menu of CS Management.2) Click Remote Login button for CS that you want to log-in.

3-2. Set extension number in each CSFollowing items need to be set in each CS when

login to CS.1) Select menu of SIP Settings - CS.2) Set CS’s extension number into phone number3) Set Authentication ID (CS’s extension number)4) Set Authentication Password (“1234”) than, Click Save.

Appendix

PS Ring Group #3 (How to Set up)

56

4. Set PS Ring Group by CS-webPSs are assigned as group member by CS-Web. The setting is required only for Super Master CS.

1) Select menu of PS Ring Group Settings

2) Click PS group registration button of specified group

3) Select PSs from Available Users and move to Group Members by “>” button.

4) Click “All Save” (Setting data is delivered to all CS)

4

2

3

Appendix

PS Ring Group #4 (How to Set up)

1

57

Air Synchronization

SIP Based DECT-CS (MaterSIP Based DECT-CS (Mater CSCS))

An CS configured as Master CS will create and send out its own timing and synchronisation.

SIP Based DECT-CS (SlaveSIP Based DECT-CS (Slave CSCS))

An CS configured as Slave CS will receive timing and synchronisation from CS set to Master CS.

Air Synchronization Mater and Slave CS

58

Air Synchronization

SIP Based DECT-CS Classification

CS Class Description

Master CS1

(synchronization source clock)

Generates clock signal.

Master CS2

(backup for Master CS1)

- Receives clock signal from Master CS1

- Can also generate clock signal if Master CS1 malfunctions.

Slave CS Receives clock signal from other CSs.

Master CS1

Master CS2

Slave CS

CSs are assigned to any one of the following three classifications forImplementing air synchronization.

Slave CS Slave CS Slave CS

Level 1 Level 2 Level 3 Level 4

Level 1

It is recommended that the number of levels in the synchronisation hierarchy is minimized for stable air synchronization. The maximum number of levels is 8

Condition of Air Synchronization

Level 8

59

IP-CS Air Synchronization

Master Unit Slave Unit

Onelook Network

Master CS Slave CS Slave CS

Onelook NetworkSlave CS registered to Slave Unit can NOT Air synchronize with Master CS registered to Master Unit, so it is necessary to install additional Master CS to Slave Unit.

Master Unit Slave Unit

Onelook Network

Master CS Slave CS Master CS Slave CS

Air Synchronization Group1 Air Synchronization Group2

Condition of Air Synchronization

60

Move CS

When move CS location which is already registrated, just back up CS data, then initialize CS. After move CS location the restore the back up data .

How to move registrated CS 1/2

CS-Web

Master

Slave1Slave2


Slave4

Move

1) Login CS-Web for Slave4 by Installer ID

2) Back up CS data to local PC

3) Reset to Factory data (See 4.2 Step 0)

4) Set Master CS Site survey mode then move CS

(See 4.2 Step2) Then finalize CS position

CS Data Back up/Restore Menu

61

Move CS

When move CS location which is already registrated, just back up CS data, then initialize CS. After move CS location the restore the back up data .

How to move registrated CS 2/2

CS-Web

Master

Slave1Slave2


Slave4

Move

5) Restore Back up data6) Change primary CS index to Master CS (Level1 this case) by tree survey menu, then apply the change

Note: After change CS Level, all CS which is in same

AirSync Group will be restarted

Tree Survey Menu

62

Site Survey (CS)

Set up Temporally CS

63

Site Survey (CS)

Locate Slave CS

64

Site Survey (PS)

CS Cover area check

65

Site Survey (PS)

How to set CS as Maintenance Mode

66

Site Planning tool

How to use Site planning tool

General Information

1) This tool assist you planning CS location on your site2) The tool can be downloaded from CS-Web page

How to use

1) Prepare Site Map information by jpg format2) Then Step1: Load Site Map information to planning tool Step2: Scaling of the Circle Step3: Generation the Service Aria Circle Step4: Deployment Planning Step5: Repeat Step3 &4 until complete planning

1.

2.

3.

4.

Repeat This Step

67

PS Function List

Detail Function LIST (1)

PS FunctionFollowing table show PS function Overview

Feature NT 3XX

SIP based

Remark for SIP DECTSIP-MLTUT13X,2XX

SIP-SLTUT113,123

SIP-DECT(UDS1XX)

DID/DIL incoming call Yes Yes Yes YesInternal Call Block Yes Yes Yes YesRing Tone Pattern Selection Yes Yes Yes Yes Selected by PS MenuCall Waiting

Yes Yes Yes YesNo 'Call Waiting Caller ID' on display;

Idle Extension Hunting Yes Yes Yes YesOutside Destinations in ICD Yes Yes Yes YesQueuing Feature

Yes Yes Yes Yes'Hurry-Up' key is not available.

VIP Call Yes Yes Yes YesLog-in/Log-out

Yes Yes Yes YesFF key has to be programmed in NS1000 Web-MC

Call Forwarding (FWD) Yes Yes Yes YesDo Not Disturb (DND) Yes Yes Yes YesFWD/DND Button, Group FWD Button

Yes Yes Yes Yes'Group FWD' key is not available.

68


Feature NT 3XXSIP based


SIP-SLTUT113,123

SIP-DECT(UDS1XX)

Line Preference. Incoming Yes No No NoCall Pickup - Directed, Group Yes Yes Yes YesHands-free Answerback Yes Yes Yes YesAutomatic Extension Release Yes Yes Yes YesEmergency Call Yes Yes Yes YesAccount Code Entry Yes Yes Yes YesDial Type Selection Yes Yes Yes YesPause Insertion

Yes Yes Yes No'Pause' key is not available..

Line Preference. OutgoingYes Yes No Yes

FF key has to be programmed in PBX

Trunk AccessYes Yes Yes Yes


One-touch DialingYes Yes No Yes


Last Number Redial Yes Yes Yes YesSpeed Dialing. Personal/System

Yes Yes Yes YesPersonal Download: N/A for SIP-DECT

Hot Line Yes No No No

69




SIP-SLTUT113,123

SIP-DECT(UDS1XX)

PDN/ SDN Yes No No NoAutomatic Callback Busy Yes No No No Alternative:Use CA

insteadExecutive Busy Override Yes No No FutureCall Monitor Yes No No FutureCall Waiting Tone Yes Yes Yes YesOff-hook Call Announcement No No No NoWhisper OHCA Yes No No NoToll Restriction (TRS)

Call Barring (Barring)Yes Yes Yes Yes

Budget Management Yes Yes Yes YesExtension Dial Lock Yes Yes Yes YesDial Tone Transfer Yes No No NoWalking COS Yes No No NoVerification Code Entry Yes Yes Yes YesAutomatic Route Selection Yes Yes Yes YesHands-free Operation Yes Yes Yes YesOff-hook Monitor Yes Yes Yes NoMute Yes Yes Yes Yes

70




SIP-SLTUT113,123

SIP-DECT(UDS1XX)

Headset Operation Yes Yes Yes YesData Line Security Yes Yes Yes NOFlash/Recall/Terminate Yes Yes* Yes YesExternal Feature Access Yes Yes Yes YesTrunk Call Limitation Yes Yes Yes Yes Drop the call without alarm(CPC) Signal Detection Yes Yes Yes YesCall Transfer Yes Yes Yes YesCall Hold Yes Yes Yes YesCall Park

Yes Yes Yes YesFF key has to be programmed in PBX

Call Splitting Yes Yes Yes YesMusic on Hold Yes Yes Yes YesConference

Yes Yes Yes YesSIP-MLT/SLT: hard "Conf" key, no LED, SIP-DECT: Function Menu, no LED 」

Privacy Release Yes No No NoPaging

Yes Yes Yes Yes SIP-SLT and SIP-DECT can not be paged

71




SIP-SLTUT113,123

SIP-DECT(UDS1XX)

Conference Group Call Yes Yes Yes Yes

SIP-MLT/SLT SIP-DECT can be a coordinator

Door phone Call Yes Yes Yes YesDoor Open Yes Yes Yes YesTrunk Answer From Any Station Yes No No NoBackground Music (BGM) Yes No No NoOutgoing Message (OGM) Yes Yes Yes YesDirect Inward System Access Yes Yes Yes YesExternal Sensor Yes No No NoExternal Relay Control Yes No No No

Caller ID Yes Yes Yes YesIncoming Call Log Yes Yes Yes YesMessage Waiting Yes Yes Yes YesAbsent Message

Yes Yes Yes YesNo absent message information on LCD while calling.

72




SIP-SLTUT113,123

SIP-DECT(UDS1XX)

Fixed Buttons Yes Yes Yes Yes Same limitation as UTFlexible Buttons Yes Yes No YesLED Indication Yes Yes Yes YesDisplay Information Yes Yes Yes YesCalling/Connected Line Identification Presentation

Yes Yes Yes Yes

Advice of Charge (AOC)Yes Yes Yes Yes

No Charge information on LCD.

Built-in SVM Yes Yes Yes YesVoice Mail (VM) Group Yes Yes Yes YesVoice Mail DTMF Integration Yes Yes Yes Yes2WAY-REC Yes No No No2WAY-Transfer Yes No No NoVM-Transfer Yes No No NoLive Call Screening (LCS) Yes No No No

73




SIP-SLTUT113,123

SIP-DECT(UDS1XX)

PS Ring Group - - - YesPS Directory - - - YesPS Feature Buttons - - - YesWireless XDP Parallel Mode Yes Yes Yes Yes Only support parallel ringingSMDR Yes Yes Yes YesPrinting Message Yes No No NoCall Charge Services Yes Yes Yes YesCall Billing for Guest Room Yes Yes Yes YesExtension Personal Identification Number

Yes Yes Yes Yes

Extension Feature Clear Yes Yes Yes YesWalking Extension Yes No No NoEnhanced Walking Extension Yes No No NoTimed Reminder Yes No No No

74




SIP-SLTUT113,123

SIP-DECT(UDS1XX)

Confirmation Tone Yes Yes Yes YesCalling/Connected Line Identification by QSIG

Yes Yes Yes YesCOLP/CONP is not available.

Call Forwarding (CF).by QSIG Yes Yes Yes YesCall Transfer (CT) by QSIG Yes Yes Yes YesCompletion of Calls to Busy Subscriber (CCBS).by QSIG

Yes No No No

Network Direct Station Selection Yes No No NoCentralized Voice Mail Yes Yes Yes YesNetwork ICD Group Yes Yes Yes YesPeer-to-Peer Connection Yes Yes Yes YesSelf Labeling No Yes No NoComputer Telephony Integration

Yes Yes Yes Yes

Following enhanced CTI functions are not available -SetDisplay -ButtonPressetc.

Communication Assistant Yes Yes Yes Yes

75




SIP-SLTUT113,123

SIP-DECT(UDS1XX)

Class of Service (COS) Yes Yes Yes YesGroup Yes Yes Yes YesTenant Service Yes Yes Yes Yes

Time Service Yes Yes Yes Limited

Only do "change the time mode (Day/Night/Lunch/Break)“ by feature access code.

Operator Features Yes Yes Yes YesManager Features Yes No No NoSystem Redundancy Yes Yes Yes Yes

Terminal redandancyYes Yes Yes Yes

Require to set an external NTP server.

Stand alone operationYes Yes Yes Yes

76

END

20121107-01 SIP based DECT_Rev1.2_7Nov_fukuda.pptx - 1st release

20121202-02 SIP based DECT_Rev1.3_2Dec_fukuda.pptx - Change #66 Time service line

20121203-03 　　 SIP based DECT_Rev1.4_3Dec_fukuda.pptx　 - 　 Add Firmware update process

20121203-04 　　 SIP based DECT_Rev1.5_6Dec_fukuda.pptx - Change PS registration process as a note Page #45 - Correct model name at SIP based. Wrong:133 -> Correct:113 Page #63-71- Correct description about flexible key configuration at Remark of SIP DECT, Page #63,64,66-Add LED information of Site survey mode- Add Site Survey operation in more detail

20121203-05 　　 SIP based DECT_Rev1.6_ 　 18Dec_fukuda.pptx - Change Syn Group explanation for One Look System (Page12 ） - Add caution when change CS-Air Setting, the CS will be restarted automatically

20121203-10 　　 SIP based DECT_Rev1.7_ 　 10Jan2013.pptx - Corrected Function List checked by Development team

20130124-01 　　 SIP based DECT_Rev1.8_ 　 24Jan2013.pptx - Change CS layer ,limitation from 4 to 8(Page 63)

77

END

2013 02-25 SIP based DECT_Rev1.9 25 Dec 2013 - Changed Page 12 Ring group 28 -> 128

2013 02-25 SIP based DECT_Rev1.9 25 Dec 2013 - Changed Page 33 LED indication explanation

2013 02-25 SIP based DECT_Rev1.9 25 Dec 2013 - Changed Page 33 Add LOGIN and PASSWORD Information

2013 02-25 SIP based DECT_Rev1.9 25 Dec 2013 - Changed Page 38 Correct Step and screen shot

2013 02-25 SIP based DECT_Rev1.9 25 Dec 2013 - Changed Page 39 Change explanation



2013 02-25 SIP based DECT_Rev1.9 25 Dec 2013 - Changed Page 45 Change screen shot

78

END




79

END

sip-based-dect rev1.9 25 feb., 2013. 2 table of contents 1. overview 2. specification and features...

Documents

overview slide

firmware air

overview hand

dect phone

duplex hands free air

duplex hands free air

firmware vibration

systemlocation ps