sink units on stainless steel stand fr 201. on stainless steel

AB FURHOFFS ROSTFRIA, BOX 93, SE-541 22 SKÖVDE, SWEDEN. PHONE +46 500-44 45 46, FAX +46 500-44 45 20. www.furhoffs.se • [email protected] AB FURHOFFS ROSTFRIA, BOX 93, SE-541 22 SKÖVDE, SWEDEN. PHONE +46 500-44 45 46, FAX +46 500-44 45 20. www.furhoffs.se • [email protected]

Chapter 2

G 1 1/2 ext.

400

52

956

5

800

52

956

5

550400 427427

G 1 1/2 ext.

400

52

956

5

800

52

956

5

550400 427427

G 1 1/2 ext.

400

52

956

5

800

52

956

5

550400 427427

G 1 1/2 ext.

400

52

956

5

800

52

956

5

550400 427427

Accessories

STRAINER BUCKET Art. no. 2SHLift up strainer bucket of stainless steel SS 2333, with perforated casing and flat bot-tom. The strainer bucket is lowered into a sleeve welded into the bottom of the sink.

Accessories

DRAWER Art. no. 2DLOf stainless steel plate on plastic guides.

WIRE BASKET Art. no. 2TKOf plastic coated wire.

SINGLE CABINET Art. no. 2ESOf stainless steel plate with removable inner shelf. Door with magnetic lock.

DOUBLE CABINET Art. no. 2DS(Design as single cabinet.)

Customer adapted special solutions are our strength. Please contact us for assistance in planning and drawing. We reserve the right to make changes.

Drawer depth 100 or 160 Basket depth 185Volume around 1,3 L

SPECIFY WHEN DESCRIBING AND ORDERING:

1. Art. no.2. Length x Width3. Sink and placement (select from range on inside page) (specify A or B dimension, min. 110 mm)4. Edges, Swedish tradition/smooth (see inside page)5. Quality SS 2333/ acid-resistant SS 23486. Accessory (see back page)7. Variant version, if any

On stainless steel stand FR 201. On stainless steel consoles FR 202. On stainless steel legs FR 203.

SINK UNITS

SINK UNITS FOR CATERING KITCHENS, INDUSTRY AND LABORATORIES:- With custom dimensions.- Manufactured of a minimum of 1.0 mm SS 2333 quality polished stainless steel plate, or SS 2348 acid-resistant quality.- With adhered, foiled, waterproof wooden surface that provides extremely good stability and sound insulation.- With a range of sinks and edgings. (See inside cover for dimen sions and drawings.)- Stainless steel screws for wall brackets, RTS 4.2 x 32, included.

ACCESSORIESSee back page for drawings and information on accessories.

VARIANT VERSION:In areas where organic material is not permitted, the wooden surface can be replaced with a stainless steel frame of square hollow section.

INSTALLATION ACCESSORIES:Stainless steel set of screws for mounting:- FR 202 consoles.- FR 203 legs.

FR 201 on stainless steel stand.

FR 202 on stainless steel consoles.

FR 203 on stainless steel legs.

SINK UNITS

Article numbers for FR 201, FR 202 and FR 203

201 01 with stainless steel stand without shelf201 02 with stainless steel stand and plate shelf201 03 with stainless steel stand and mesh shelf

202 01 with stainless steel consoles without shelf202 02 with stainless steel consoles and plate shelf

203 01 with stainless steel legs without shelf203 02 with stainless steel legs and plate shelf


40

32

24

32

24

15

R 8

40

32

24

32

24

15

R 8

40

32

24

32

24

15

R 8

400

290

820 500

500

550

440

700

1430700

400

500

500

550

1120 550

500

700

400

500

1020500

440

700

500

700

1420700

EDGES:

Front edge End edge Rear edge

Sinks and edges

K-50

Sink depth 160/200

Sinks and edges

BE-50

Sink depth 200

BD-50

Sink depth 200

BE-55

Sink depth 240

BD-55

Sink depth 240

BE-70

Sink depth 240

BD-70

Sink depth 240

BE-SPEC.

Sink depth 240 or 360

BD-SPEC.

Sink depth 240 or 360

THE FOLLOWING SINKS CAN BE SELECTED FOR WELDING INTO THE SINK UNIT:

DRAIN DESIGN:The BE and BD sinks are fitted with chrome-plated discharge valves R 1 1/2”, overflow and plastic water trap.

The right-hand sink in the K-50 model is fitted with discharge valve. (The slop sink to the left has no shut-off.)

The ends can also be delivered with edges as rear edges.

The rear edge can also be delivered with covered back.

Design: Swedish tradition

Design: Smooth

Sinks from the 207 range may also be selected.

BE-SPEC. can also be dimensioned in line with customer specifications.

BD-SPEC. can also be manufactured in line with customer specifications.

EN

11

04


Sink units FR 201, FR 202 and FR 203Sink units FR 201, FR 202 and FR 203

30

00

-10

0C

usto

m w

idth

sst

anda

rd 6

00

Std

70,

min

50

Custom lengthsA (min. 110) B (min. 110)

90

0

400

300

40

Cus

tom

wid

ths

stan

dard

600

Std

70,

min

50.


900

595

Ø 11

15090

400

300

40

Cus

tom

wid

ths

stan

dard

600

Sta

ndar

d 70,

min

50.


900

125

305

Ø 11

400

FR 201 with stainless steel stand

FR 202 with stainless steel consoles

FR 203 with stainless steel legs

Extra leg pairs, consoles or legs can be ordered in special cases.

Number of leg pairs Unit length, mm

2 pcs — 1790 3 pcs 1800 — 3590 4 pcs 3600 —

Number of consoles Unit length, mm

2 pcs — 1790 3 pcs 1800 — 3590 4 pcs 3600 —

Number of legs Unit length, mm

2 pcs — 1790 3 pcs 1800 — 3590 4 pcs 3600 —


Chapter 2

G 1 1/2 ext.

400

52

956

5

800

52

956

5

550400 427427

G 1 1/2 ext.

400

52

956

5

800

52

956

5

550400 427427

G 1 1/2 ext.

400

52

956

5

800

52

956

5

550400 427427

G 1 1/2 ext.

400

52

956

5

800

52

956

5

550400 427427

Accessories

STRAINER BUCKET Art. no. 2SHLift up strainer bucket of stainless steel SS 2333, with perforated casing and flat bot-tom. The strainer bucket is lowered into a sleeve welded into the bottom of the sink.

Accessories

DRAWER Art. no. 2DLOf stainless steel plate on plastic guides.

WIRE BASKET Art. no. 2TKOf plastic coated wire.

SINGLE CABINET Art. no. 2ESOf stainless steel plate with removable inner shelf. Door with magnetic lock.

DOUBLE CABINET Art. no. 2DS(Design as single cabinet.)

Customer adapted special solutions are our strength. Please contact us for assistance in planning and drawing. We reserve the right to make changes.

Drawer depth 100 or 160 Basket depth 185Volume around 1,3 L

SPECIFY WHEN DESCRIBING AND ORDERING:

1. Art. no.2. Length x Width3. Sink and placement (select from range on inside page) (specify A or B dimension, min. 110 mm)4. Edges, Swedish tradition/smooth (see inside page)5. Quality SS 2333/ acid-resistant SS 23486. Accessory (see back page)7. Variant version, if any


SINK UNITS

SINK UNITS FOR CATERING KITCHENS, INDUSTRY AND LABORATORIES:- With custom dimensions.- Manufactured of a minimum of 1.0 mm SS 2333 quality polished stainless steel plate, or SS 2348 acid-resistant quality.- With adhered, foiled, waterproof wooden surface that provides extremely good stability and sound insulation.- With a range of sinks and edgings. (See inside cover for dimen sions and drawings.)- Stainless steel screws for wall brackets, RTS 4.2 x 32, included.

ACCESSORIESSee back page for drawings and information on accessories.

VARIANT VERSION:In areas where organic material is not permitted, the wooden surface can be replaced with a stainless steel frame of square hollow section.

INSTALLATION ACCESSORIES:Stainless steel set of screws for mounting:- FR 202 consoles.- FR 203 legs.

FR 201 on stainless steel stand.

FR 202 on stainless steel consoles.

FR 203 on stainless steel legs.

SINK UNITS

Article numbers for FR 201, FR 202 and FR 203

201 01 with stainless steel stand without shelf201 02 with stainless steel stand and plate shelf201 03 with stainless steel stand and mesh shelf

202 01 with stainless steel consoles without shelf202 02 with stainless steel consoles and plate shelf

203 01 with stainless steel legs without shelf203 02 with stainless steel legs and plate shelf


sink units on stainless steel stand fr 201. on stainless steel

Documents