single plate incubators - · pdf filedin iso 2768 t1 - m din iso 2768 t2 - k zust. ers.d.:...
TRANSCRIPT
Benefits
Function
Superior heating ramps
Excellent temperature accuracy
Best temperature uniformity
Compact design
Easy integration
Single Plate IncubatorsIncubator MP, DWP Incubator Shaker MP, DWP
Heating
Shaking
Single Plate Incubator product line
Product DescriptionThe single plate incubator product line are automated and stackable heated incubators for one ANSI/SLAS disposable. Two incubation-only versions are available for incubation of either one microplate (MP) or deepwell plate (DWP) including a lid. Two further versi-ons offer an additional low vibration shaking function, also for MPs or DWPs.
Precise temperature and shaker control, USB interface, plate loading sensors and seve-ral self test routines guarantee a safe and fast processing of samples. The design of the units with shaking function is based on an unique vibration reduced shaking principle, which enables free programmable shaking curves (linear, circle, elliptic, eight). Software and verification tools are available to form a complete thermal solution for all kinds of incubation applications.
The units are plug-and-play high performance incubation devices with CE and UL certi-fication, prepared for use in customer IVD applications. MP variants heating is achieved via bottom contact surface resulting in a heating of the sample from 20° up to 37° in approximately 20 minutes. The DWP variants heat from all sides within the chamber and thus are ideal if condensation needs to be avoided during incubation. This heating princi-ple also confers heating rates up to 4 times faster than in conventional incubators.
All Incubator models:• Stackable to form towers, no additional fixation needed, different devices stackable• Devices are individually & independently controlled (master-slave principle)• 90° turning of the lid after drawer opening ensures easy access by pipetting heads & robotic grippers• Self-test routines and plate loading sensor guarantee safe and fast processing• Direct contact heating with temperature boost ensures best heating rates• Temperature range: ambient +5 K to +80ºC• Plate with lid also fits
Incubator Shaker models:• Precise temperature and shaker control for micro plates and deep well plates.• Shaking from 400 to 1.800 RPM, amplitudes from 0 to 3 mm• Free programmable shaking pattern (linear, circle, elliptic, eight)
The Incubators are integrated with major liquid handling systems, primarily:Beckman Coulter: Biomek FX, NX, i-SeriesPerkinElmer: JANUS, Sciclone, Zephyr, Multiprobe IIHamilton: Star Line, VantageTecan: Freedom EVO, Fluent
Product Part No. Temperature range RPM Amplitude
Incubator Shaker DWP 7300009 ambient +5K to +80°C 400 - 1.800 0 - 3 mm
Incubator Shaker MP 7300013 ambient +5K to +80°C 400 - 1.800 0 - 3 mm
Incubator DWP 7300006 ambient +5K to +80°C - -
Incubator MP 7300003 ambient +5K to +80°C - -
Incubators for Lab Automation SystemsTemperature control and shaking within enclosed chambers.
7300009 Incubator Shaker DWP
7300003 Incubator MP
7300006 Incubator DWP
7300013 Incubator Shaker MPFeatures
Main Specifications Specifications 7300009 7300013 7300006 7300003
Interface USB
Drawer accuracy (mm) ±0.3
Ambient temperature 15°C to 32°C
Accuracy at 37°C target temp.1) ±0.3°C
Uniformity at 37°C target temp.1) ±1.0°C2) ±0.8°C3) ±0.6°C2) ±0.5°C3)
Heat up time 20°C to 37°Cvaries depending on plate, volume and type of liquid. Please refer to manual or contact INHECO for further information
Input 24Vdc/60W 24Vdc/50W 24Vdc/45W 24Vdc/30W
Dimensions W x D x H (mm) 149x268x139 149x268x87 149x268x104 149x268x52
Shaker load 40-250g 40-250g - -1) measured in well2) Data refer to 96 well round bottom deep well plate at 15ºC ambient temperature 3) Data refer to 96 well flat bottom microplate at 15ºC ambient temperature
Footprint of all models
Accessories Product Article No.
Power Supply FSP-180 AAA 2400121 supplies power for 2 Incubator Shaker DWP or 3 Incubator Shaker MP or 4 Incubator DWP or 6 Incubator MP.
7300003 Incubator MP top view, drawer open
Height
7300003 Incubator MP7300006 Incubator DWP
7300013 Incubator Shaker MP
7300009 Incubator Shaker DWP
X
127,76
85,48
Heat area
15,5
max.
2,5ma
x.
X (2 : 1)
Heat area
Disposable
NOTE: The information or material contained in this document is STRICTLY CONFIDENTIAL and any recipientof this document shall not disclose or divulge, directly or indirectly, this document or the information or materialcontained herein without the written consent of INHECO GmbH. All copyrights, trademarks, patents and otherrights in connection herewith are expressly reserved to INHECO GmbH and no license is created hereby.
HINWEIS: Sämtliche Informationen, die in diesem Dokument enthalten sind, sind STRENG VERTRAULICH. Jeder Empfängerdieses Dokuments darf die darin enthaltenen Informationen, direkt oder indirekt, nur mit ausschliesslicher, schriftlicher Zustimmungder INHECO GmbH an Dritte weitergeben oder offenlegen. Die INHECO GmbH behält sich alle Rechte in Bezug auf Urheberrechtsgesetz,Patent- und Gebrauchsmusterschutz vor. Lizenzrechte werden hierdurch nicht erteilt.
Disposable specification
1
Datum
Datum Benennung
1Dienstag, 21. August 2007 17:18:04
Bl.Artik
el-Nr
.: .....
..
G:\05_Abteilungen_(nicht öffentlich)\11_Projekte\319_Incubator MP\03_KO_EL\00_KO_V1\04_TD\GZ-01344 Dispoable specification.SLDDRW
Oberfläche
Änderung
Werkstoff
INHECO GmbH
Name
Name
industrial heating and cooling
161.75
Gepr.Bearb.
SolidWorks; DIN A4Blatt
1:1.5
WerkstückkantenAllgemeintoleranzen
Abmessungen
Maßstab
GZ-01344_REL_00
Ers.f.:
21.08.2007
sieheZeichnung
zuletzt gesp.:
MMO
Gewicht
Behandlungsiehe
ZeichnungDIN ISO 2768 T1 - mDIN ISO 2768 T2 - K
Ers.d.:Zust.
Norm
Zeichnungsnummer
Incubator / Incubator Shaker Microplate
Maximum height of disposable in Incubator MP
45
X127,76
85,48
Heat area
2,5ma
x.45
X (2 : 1)
Disposable
Heat area
NOTE: The information or material contained in this document is STRICTLY CONFIDENTIAL and any recipientof this document shall not disclose or divulge, directly or indirectly, this document or the information or materialcontained herein without the written consent of INHECO GmbH. All copyrights, trademarks, patents and otherrights in connection herewith are expressly reserved to INHECO GmbH and no license is created hereby.
HINWEIS: Sämtliche Informationen, die in diesem Dokument enthalten sind, sind STRENG VERTRAULICH. Jeder Empfängerdieses Dokuments darf die darin enthaltenen Informationen, direkt oder indirekt, nur mit ausschliesslicher, schriftlicher Zustimmungder INHECO GmbH an Dritte weitergeben oder offenlegen. Die INHECO GmbH behält sich alle Rechte in Bezug auf Urheberrechtsgesetz,Patent- und Gebrauchsmusterschutz vor. Lizenzrechte werden hierdurch nicht erteilt.
Disposable specification
1
Datum
Datum
1Freitag, 2. Oktober 2009
Bl.Artik
el-Nr
.: ...
....
M:\08_Projekt\357_IncubatorDWP USB\MS1bisMS2\03_TE\Konstruktion\20_nichtÜberwacht\01_BG\GZ-01687 Disposable specification.SLDDRW
Änderung
INHECO GmbH
Name
Name
industrial heating and cooling
Gepr.Bearb.
SolidWorks; DIN A4Blatt
1:1.5
GZ-01687_REL_00
Ers.f.:
02.10.2009
zuletzt gesp.:
MMO
DIN ISO 2768 T1 - mDIN ISO 2768 T2 - K
Ers.d.:Zust.
Norm
Incubator DWP
Werkstückkanten
sieheZeichnung
Oberfläche Werkstoff Gewicht (g)
Abmessungen (mm)
Behandlung
Benennung
Zeichnungsnummer
Maßstab
Allgemeintoleranzen
sieheZeichnung
--
Maximum height of disposable in Incubator DWP
Positioning Pins
Positioning Pins
Positioning Pins
Positioning Pins
When you stack more than 2 Incubator Shaker DWP or 3 Incubator Shaker MP,
additional fixation is needed.
Drawer dimensions
7300009 Incubator Shaker DWP
7300003 Incubator MP 7300006 Incubator DWP
7300013 Incubator Shaker MP
111390239
151
5240
86111
151
360
40 52
345193
111
151 20 5151
375223
86
111
INHECO GmbHFraunhoferstrasse 1182152 MartinsriedGermany
Tel.: +49 89 89 95 93 -101Fax: +49 89 89 95 [email protected]
www.inheco.comThis Datasheet can also be downloaded from our website.
20
BRO_14-11-17_Incubator2018_00