simatic hmi wincc v7.3 - communication channel 5 opc - open connectivity 6 profibus fms 7 s5...

Download SIMATIC HMI WinCC V7.3 - Communication  Channel 5 OPC - Open Connectivity 6 PROFIBUS FMS 7 S5 Ethernet Layer 4 8 S5 PROFIBUS FDL 9 S5 Programmers Port AS511 10 S5

Post on 24-Mar-2018

213 views

Category:

Documents

1 download

Embed Size (px)

TRANSCRIPT

  • SIMATIC HMI

    WinCC V7.3WinCC: Communication

    System Manual

    Print of the Online Help

    06/2014A5E34374800-AA

    Process communication 1

    Allen Bradley - Ethernet IP 2

    Mitsubishi Ethernet 3

    Modbus TCPIP 4

    OPC Channel 5

    OPC - Open Connectivity 6

    PROFIBUS FMS 7

    S5 Ethernet Layer 4 8

    S5 PROFIBUS FDL 9

    S5 Programmers Port AS511 10

    S5 Serial 3964R 11

    SIMATIC S7 Protocol Suite 12

    SIMATIC S7-1200, S7-1500 Channel

    13

    SIMATIC TI Ethernet Layer 4 14

    SIMATIC TI Serial 15

    SIMOTION 16

    System Info 17

    Communication - Diagnostics 18

  • Legal informationWarning notice system

    This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger.

    DANGER

    indicates that death or severe personal injury will result if proper precautions are not taken.

    WARNING

    indicates that death or severe personal injury may result if proper precautions are not taken.

    CAUTION

    indicates that minor personal injury can result if proper precautions are not taken.

    NOTICEindicates that property damage can result if proper precautions are not taken.If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage.

    Qualified PersonnelThe product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems.

    Proper use of Siemens productsNote the following:

    WARNING

    Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed.

    TrademarksAll names identified by are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

    Disclaimer of LiabilityWe have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.

    Siemens AGIndustry SectorPostfach 48 4890026 NRNBERGGERMANY

    A5E34374800-AA 08/2014 Subject to change

    Copyright Siemens AG 2014.All rights reserved

  • Table of contents

    1 Process communication.............................................................................................................................13 1.1 Communication Basics................................................................................................................13 1.2 Basic Rules for Configuring Connections....................................................................................14 1.3 WinCC process communication..................................................................................................15 1.3.1 WinCC process communication..................................................................................................15 1.3.2 Principle of WinCC communication.............................................................................................15 1.3.3 External tags...............................................................................................................................17 1.3.3.1 External tags...............................................................................................................................17 1.3.3.2 How to Create a New Connection...............................................................................................19 1.3.3.3 An external tag is configured as follows......................................................................................20 1.3.3.4 Format adaptation sorted by WinCC data type...........................................................................21 1.3.3.5 Format adaptation sorted by AS data type..................................................................................27 1.3.3.6 Principle of the BinWrite-Mechanism..........................................................................................35 1.3.3.7 How to Configure a Tag with "BinWrite"......................................................................................37 1.3.4 Port Addresses for Coupling via Ethernet...................................................................................39

    2 Allen Bradley - Ethernet IP.........................................................................................................................41 2.1 WinCC Channel "Allen Bradley - Ethernet IP".............................................................................41 2.2 Channel Unit Assignment............................................................................................................42 2.3 Supported Data Types................................................................................................................43 2.4 Configuring the Channel..............................................................................................................44 2.4.1 Configuring the Channel "Allen Bradley - Ethernet IP"................................................................44 2.4.2 How to configure a "Allen Bradley E/IP PLC5" channel unit connection.....................................45 2.4.3 How to configure an "Allen Bradley E/IP SLC50x" channel unit connection...............................46 2.4.4 How to configure an "Allen Bradley E/IP ControlLogix" channel unit connection........................47 2.4.5 Examples: Communication path .................................................................................................48 2.4.6 Configuring the tags....................................................................................................................48 2.4.6.1 Configuring the tags....................................................................................................................48 2.4.6.2 Addressing..................................................................................................................................50 2.4.6.3 Addressing syntax.......................................................................................................................51 2.4.6.4 Addressing Types........................................................................................................................52 2.4.6.5 Examples for Addressing............................................................................................................53 2.4.6.6 How to configure a tag for the Allen Bradley E/IP ControlLogix channel unit.............................54 2.4.6.7 How to configure a tag with bit by bit access for Allen Bradley E/IP PLC5 or SLC50x...............55 2.4.6.8 How to configure a tag with byte by byte access for Allen Bradley E/IP PLC5 or SLC50x.........56 2.4.6.9 How to configure a tag with word by word access for Allen Bradley E/IP PLC5 or SLC50x. ......56 2.4.6.10 How to configure a text tag for Allen Bradley E/IP PLC5 or SLC50x..........................................57

    3 Mitsubishi Ethernet.....................................................................................................................................59 3.1 WinCC channel "Mitsubishi Ethernet".........................................................................................59 3.2 Supported data types..................................................................................................................60 3.3 Configuring the Channel..............................................................................................................61

    WinCC: CommunicationSystem Manual, 06/2014, A5E34374800-AA 3

  • 3.3.1 Configuring the "Mitsubishi Ethernet" channel............................................................................61 3.3.2 How to configure a "Mitsubishi FX3U Series" channel unit connection.......................................61 3.3.3 How to configure a "Mitsubishi Q Series" channel unit connection.............................................63 3.3.4 Configuring the tags....................................................................................................................64 3.3.4.1 Configuring the tags....................................................................................................................64 3.3.4.2 How to configure a tag................................................................................................................66

    4 Modbus TCPIP......................................................................................................................

Recommended

View more >