silink2 master iola2us-01101 - sick€¦ · silink2 master iola2us supplies approx. 80 ma at 24 v....
TRANSCRIPT
EN
SiLink2 MasterIOLA2US-01101
IO-Link USB Master
OperAtIng InStrUctIOnS
Operating instructions IO-Link USB Master SiLink2 Master
2 ©SICKAG•PresenceDetection•Subjecttochangewithoutnotice•8017387
Copyright protection!
This work is protected by copyright. The resulting rights are retained by SICK AG. Duplication of this work is only permitted within the bounds of the statutory regulations of the Urhebergesetz [Copyright Act]. The work may not be altered or abridged without the express written permission of SICK AG.
©SICKAG•PresenceDetection•Subjecttochangewithoutnotice•8017387 3
Operating instructions IO-Link USB Master SiLink2 Master
Table of Contents
Table of Contents1 General ............................................................................................... 5
1.1 InformationontheOperatingInstructions...............................5
1.2 ExplanationofSymbols.............................................................5
1.3 ScopeofDelivery.......................................................................5
1.4 CustomerService......................................................................6
1.5 ECDeclarationofConformity....................................................6
2 Safety .................................................................................................. 7
2.1 CorrectUse.................................................................................7
2.2 IncorrectUse..............................................................................7
2.3 RequirementsforQualifiedPersonnel.....................................8
3 Identification ...................................................................................... 9
3.1 TypeLabel..................................................................................9
4 StructureandFunction ...................................................................... 9
4.1 Structure.....................................................................................9
4.2 Function................................................................................... 10
4.3 StatusIndicators..................................................................... 10
5 ElectricalConnection ...................................................................... 11
5.1 Safety....................................................................................... 11
5.2 ElectricalConnectionofSiLink2Master............................... 11
5.3 ConnectionDiagram............................................................... 12
5.3.1 USBConnectionDiagram....................................... 12
5.3.2 IO-LinkConnectionDiagram.................................. 12
6 Installing Software .......................................................................... 13
6.1 RequiredSoftware.................................................................. 13
6.2 InstallationwithSOPASETConfigurationProgram.............. 13
6.3 InstallationwithFDTContainer.............................................. 14
7 CleaningandMaintenance ............................................................. 16
8 Troubleshooting ............................................................................... 16
9 Disposal ............................................................................................ 16
Operating instructions IO-Link USB Master SiLink2 Master
Table of Contents
4 ©SICKAG•PresenceDetection•Subjecttochangewithoutnotice•8017387
10 TechnicalData ................................................................................. 17
10.1 Dimensions............................................................................. 17
10.2 SupplyandInterface.............................................................. 18
10.3 AmbientConditions................................................................ 18
10.4 DesignConfiguration.............................................................. 18
Index .......................................................................................................... 19
©SICKAG•PresenceDetection•Subjecttochangewithoutnotice•8017387 5
Operating instructions IO-Link USB Master SiLink2 Master
General
1 General
1.1 Information on the OperatingInstructions
TheseoperatinginstructionssupplementthesuppliedQuickstartguideandincludeadditionalinformationandmoredetaileddescriptionsofworkingwiththeIO-LinkUSBMasterSiLink2Master.
Theoperatinginstructionsareintendedtobeusedbyqualifiedpersonnelandelectricalspecialists.
1.2 Explanation of Symbols
PhysicalDamage Warningsintheseoperatinginstructionsarelabeledwithsymbols.
Thenotesmustbecompliedwithandcarefulactionsmustbetakeninordertoavoidphysicaldamage.
WARNING!
…indicatesapossiblehazardoussituationwhichmayleadtophysicaldamageifitisnotavoided.
TipsandRecommendationsNOTE!
… highlights useful tips and recommendations as well as information for efficient and hassle-free operation.
1.3 ScopeofDelivery
Includedwithdelivery:
• SiLink2 Master IOLA2US
• 1USBcable
• 1wallplug
Supplieddocumentation:
• Quickstart
Operating instructions IO-Link USB Master SiLink2 Master
General
6 ©SICKAG•PresenceDetection•Subjecttochangewithoutnotice•8017387
1.4 CustomerService
Ifyourequireanytechnicalinformation,ourcustomerservicedepartmentwillbehappytohelp.
Seethebackpageforyourrepresentative.
NOTE!
In order to allow us to deal with the matter quickly, please note down the type designation and order number before calling. You can find the type designation and order number on the type label. → See Page 9, Chapter 3.1.
1.5 ECDeclarationofConformity
→ YoucandownloadtheECdeclarationofconformityonlineat "www.mysick.com/de/silink".
©SICKAG•PresenceDetection•Subjecttochangewithoutnotice•8017387 7
Operating instructions IO-Link USB Master SiLink2 Master
Safety
2 Safety
2.1 CorrectUse
TheSiLink2MasterIOLA2USisusedasanadapterbetweenanIO-LinkdeviceandaWindowsPC.IO-LinkdevicescanbeconfiguredviatheSiLink2MasterandaconfigurationprogramsuchasSOPASEToranFDT-basedconfigurationprogram.
SICKAGacceptsnoliabilityfordirectorindirectlossesordamagewhichresultfromtheuseoftheproduct.Thisappliesinparticularforadifferentuseoftheproductwhichdoesnotcomplywiththeintendedpurposeandisnotdescribedormentionedinthisdocument.
2.2 IncorrectUse
TheSiLink2MasterIOLA2USmustnotbeusedinexplosionareas.
Allusesnotdescribedundercorrectuseareprohibited.
Noaccessoriesmaybeconnectedwhichhavenotbeenexplicitlystipulated,intermsofquantityandproperties,andapprovedbySICKAG.
Operating instructions IO-Link USB Master SiLink2 Master
Safety
8 ©SICKAG•PresenceDetection•Subjecttochangewithoutnotice•8017387
2.3 Requirements for QualifiedPersonnel
WARNING!
Damagetothedeviceintheeventofimproperhandling!
Improperhandlingmayleadtophysicaldamage.
Therefore:
• Allworkmustonlyeverbecarriedoutbythestipulatedpersons.
Theoperatinginstructionsstatethefollowingqualificationrequirementsforthevariousareasofwork:
• Qualified personnel areabletocarryouttheworkassignedtothemandindependentlyrecognizepotentialrisksduetotheirspecialisttraining,knowledgeandexperience,aswellasknowledgeoftherelevantregulations.
• Electrical specialists areabletocarryoutworkonelectricalsystemsandindependentlyrecognizepotentialrisksduetotheirspecialisttraining,knowledgeandexperience,aswellasknowledgeoftherelevantstandardsandregulations. InGermany,theelectricalspecialistmustsatisfytheregulationsoftheworksafetyregulationBGVA3(e.g.,masterelectrician).Correspondingregulations,whichmustbeobserved,applyinothercountries.
©SICKAG•PresenceDetection•Subjecttochangewithoutnotice•8017387 9
Operating instructions IO-Link USB Master SiLink2 Master
Identification
3 Identification
3.1 Type Label
SiLink2 MasterIOLA2US-011011061790
D-79183 Waldkirchwww.sick.com
US
B Err
orC
H2
(DI/D
O)
CH
1 (C
/Q)
IN-D
C
Made in Germany
PW
R
1
235
6
7
4
8
9
Fig. 1: Type Label
1 IO-Link symbol
2 LED labeling (side)
3 CE mark
4 Device type
5 Order number
6 Labeling Mini USB B interface (side)
7 LED labeling (side)
8 Manufacturer address
9 Labeling of the connection of an external wall plug (side)
4 StructureandFunction
4.1 Structure
1
2
3
4 5
6
7
Fig. 2: Structure of SiLink2 Master
1 Supply voltage DC 24 V connection of supplied power supply
2 Function display LED (yellow) 'PWR'
3 Mini USB B, connection of PC via supplied USB cable
4 Function display LED (green) 'C1 (C/Q)'
5 Function display LED (yellow) 'C2 (DI/DO)'
6 Function display LED (red) 'Error'
7 M12 male connector, connection IO-Link device
Operating instructions IO-Link USB Master SiLink2 Master
StructureandFunction
10 ©SICKAG•PresenceDetection•Subjecttochangewithoutnotice•8017387
4.2 Function
TheSiLink2MasterisusedasanadapterbetweenanIO-LinkdeviceandaPCwithaWindowsoperatingsystem.IO-LinkdevicescanbeconfiguredviatheSiLink2MasterandaconfigurationprogramsuchasSOPASEToranFDT-basedconfigurationprogram.
4.3 StatusIndicators
FunctionDisplays(LEDs)
FunctionDisplay Description
PWR •LEDyellow: supplyviatheUSBport.
•LEDoff:nooperation
CH1(C/Q) DisplayIO-LinkandSIOmode
•LEDgreen – Slowflashing:noIO-Linkconnectionpresent – Quickflashing:IO-Linkconnectionisinthe'Preoperate'mode
– Illuminated:adataexchange(operate)istakingplaceviatheIO-Linkconnection.
•LEDyellow:SIOmode
CH2(DI/DO) •LEDyellow displaySIOmode
Error •LEDred displayoferror:short-circuitordatatransmissionerror
Table 1: Function displays (LEDs)
©SICKAG•PresenceDetection•Subjecttochangewithoutnotice•8017387 11
Operating instructions IO-Link USB Master SiLink2 Master
ElectricalConnection
5 ElectricalConnection
5.1 Safety
IncorrectSupplyVoltageWARNING!
Devicedamageduetoincorrectsupplyvoltage!
Incorrectsupplyvoltagecancausedamagetothedevice.
Therefore:
• Ifnecessary,onlyoperatetheSiLink2Masterusingthesuppliedwallplug.
5.2 ElectricalConnectionofSiLink2Master
2USB IO-Link
PC SiLink2 Master IO-Link Device 1
Fig. 3: Electrical Connection of SiLink2 Master
1 USB cable
2 Sensor cable
1. Ensurepowersupplyisnotconnected.
2. ConnectthePCtotheUSBMiniBfemaleconnectoroftheSiLink2MasterusingthesuppliedUSBcable.
3. ConnectIO-LinkdevicetotheM12maleconnectoroftheSiLinkMasterusingasensorcable.A3-poleor4-polecablemaybeusedasthesensorcable.
NOTE!
If the power requirement of the IO-Link device is > 80 mA, connect the supplied wall plug to the DC 24 V female connector of the SiLink Master and connect the wall plug to the supply voltage.
Operating instructions IO-Link USB Master SiLink2 Master
ElectricalConnection
12 ©SICKAG•PresenceDetection•Subjecttochangewithoutnotice•8017387
WallPlugUsage Asstandard,aUSBportprovides500mAat5V.Withoutawallplug,theSiLink2MasterIOLA2USsuppliesapprox.80mAat24V.ForlotsofIO-Linkdevices,apowersupplyof80mAissufficient.
IftheIO-Linkdeviceneedsmorepower,e.g.,whenstartingup,thenyouwillneedtousethesuppliedwallplug.
Fig. 4: Wall plug pin assignment
5.3 ConnectionDiagram
5.3.1 USBConnectionDiagram
124 35
Fig. 5: Mini USB B connection diagram
Contact Signal Description
1 +5V VBUS+5VDC/500mA
2 D– Data–
3 D+ Data+
4 ID nc:notassigned
5 GND Ground(0V)
Table 2: Description Mini USB B
5.3.2 IO-LinkConnectionDiagram
1 2
4 3
5
Fig. 6: IO-Link connection diagram, M12 male connector, 5-pole, A-coding
Contact Signal Description
1 +24V Supplyvoltage:DC+24V
2 SIO SIO:CH2(DI/DO)
3 GND Supplyvoltage:0V
4 IO-Link IO-Link:CH1(C/Q)
5 – nc:notassigned
Table 3: Description IO-Link, M12 male connector, 5-pole, A-coding
©SICKAG•PresenceDetection•Subjecttochangewithoutnotice•8017387 13
Operating instructions IO-Link USB Master SiLink2 Master
Installing Software
6 Installing Software
6.1 Required Software
InordertobeabletoconfiguretheIO-LinkdeviceviatheSiLInk2Master,youwilleitherneedtheSOPASETconfigurationprogramfromSICKoraconfigurationprogrambasedonFDT/DTMtechnology.
NOTE!
For additional information and for configuration programs, go to 'www.mysick.com/de/silink'.
6.2 InstallationwithSOPASETConfigurationProgram
YoucanusetheSOPASETconfigurationprogramfromversion2.83upwards.
1. StartinstallationoftheSOPASETconfigurationprogramusingthe'setup.exe'file.Thefollowingwindowwillappear:
Fig. 7: SOPAS Engineering Tool Setup
Operating instructions IO-Link USB Master SiLink2 Master
Installing Software
14 ©SICKAG•PresenceDetection•Subjecttochangewithoutnotice•8017387
2. InstallSOPASETconfigurationprogramaccordingtotheinstallationwizard.
3. InstallSDDfileoftheIO-Linkdevice.
4. ConnectSiLink2MastertothePCandtotheIO-Linkdevice. →SeePage11,Chapter5.
5. ConnectIO-LinkdeviceaccordingtotheConnectionWizardforIO-Link.
Fig. 8: IO-Link device in SOPAS ET
6.3 InstallationwithFDTContainer
YoucanusethegatewayDTMfromversion2.00upwards.
1. Startinstallationofthegatewayusingthe'setup.exe'file.
2. InstallDTMoftheIO-LinkdeviceorIODDinterpreter.Inordertodothis,startinstallationusingthe'setup.exe'file.
3. UpdatedevicecatalogviatheFDT-basedconfigurationprogram.Inordertodothis,clickthe'Update'button.
Fig. 9: Update device catalog
©SICKAG•PresenceDetection•Subjecttochangewithoutnotice•8017387 15
Operating instructions IO-Link USB Master SiLink2 Master
Installing Software
NOTE!
The SiLink2 Master IOLA2US appears in the device catalog as 'IO-Link USB' of the manufacturer 'IO-Link'.
4. Setupnetworkintheconfigurationprogram.
5. ConnectSiLink2MastertothePCandIO-Linkdevice.→SeePage11,Chapter5.
6. Setupconnectionintheconfigurationprogram.
7. OpenuserinterfaceoftheIO-Linkdevicebydouble-clickingontheIO-Linkdeviceorviathecontextmenuintheconfigurationprogram.
Fig. 10: Open user interface of the IO-Link device
Operating instructions IO-Link USB Master SiLink2 Master
CleaningandMaintenance
16 ©SICKAG•PresenceDetection•Subjecttochangewithoutnotice•8017387
7 CleaningandMaintenance
SICKdevicesaremaintenance-free.Wedorecommendcheckingthescrewandplugconnectionsandcleaningthedeviceatregularintervals.
8 Troubleshooting
Indication Possible Cause Troubleshooting
RedLED'Error'illuminated. Datatransmissionerror Transmitdataagain
Short-circuit ChangeSiLink2Master.
Table 4: Troubleshooting
9 Disposal
Observethefollowingpointsfordisposal:
• Donotdisposeofthedeviceindomesticrefuse.
• Disposeofthedeviceaccordingtotherelevantcountry-specificregulations.
©SICKAG•PresenceDetection•Subjecttochangewithoutnotice•8017387 17
Operating instructions IO-Link USB Master SiLink2 Master
TechnicalData
10 TechnicalData
NOTE!
You can download, save and print the relevant online data sheet with technical data, dimensions, and connection diagram for your IO-Link USB Master online at 'www.mysick.com/de/silink'.
10.1 Dimensions
1
2
3
4 5
6
7
41 (1.6
1)
54(2.13)
16(0.63)
M 1
2
Fig. 11: Dimensions of IO-Link USB Master SiLink2 Dimensions with no brackets in mm. Dimensions with brackets in inches.
1 Supply voltage DC 24 V connection of supplied power supply
2 Function display LED (yellow) 'PWR'
3 Mini USB B, connection of PC via supplied USB cable
4 Function display LED (green) 'C1 (C/Q)'
5 Function display LED (yellow) 'C2 (DI/DO)'
6 Function display LED (red) 'Error'
7 M12 male connector, connection IO-Link device
Operating instructions IO-Link USB Master SiLink2 Master
TechnicalData
18 ©SICKAG•PresenceDetection•Subjecttochangewithoutnotice•8017387
10.2 SupplyandInterface
USB USB2.0(MiniUSBB)
PowerrequirementfromUSB ≤500mA
SupplyoftheIO-LinkdeviceviaUSB DC24V/80mA
Externalsupplyviasuppliedwallplug DC24V/1A
Polesafety Yes
IO-Linkcommunication IO-Linkspecification1.1
IO-Link port ClassA
Table 5: Supply
10.3 Ambient Conditions
Markofconformity CE
Protectionclass III
Ambienttemperaturerange • Operation:0°C…+45°C
• Storage:–40°C…+80°CEnclosurerating IP20
Table 6: Ambient conditions
10.4 DesignConfiguration
Dimensions→ SeePage17,Chapter10.1.
Connections • 1femaleconnector:connectionofexternalwallplug
• 1MiniUSBB:PCconnection
• 1maleconnectorM12,5-pole,A-coding:sensorcableconnection,5-poleor4-pole
Table 7: Design Configuration
©SICKAG•PresenceDetection•Subjecttochangewithoutnotice•8017387 19
Operating instructions IO-Link USB Master SiLink2 Master
Index
A
Ambientconditions......................................................18
C
Cleaning........................................................................16Configurationprogram.................................................13Connectiondiagram
IO-Link.....................................................................12USB..........................................................................12
Correct use.....................................................................7CustomerService...........................................................6
D
Designconfiguration....................................................18Dimensions...................................................................17Disposal........................................................................16
E
ECDeclarationofConformity........................................6Electricalconnection
SiLink2 Master.......................................................11Electricalspecialist
Requirement.............................................................8Explanationofsymbols..................................................5
F
FDT/DTM.......................................................................13Function........................................................................10Functiondisplays..........................................................10
I
Incorrect use...................................................................7IO-Link
Connectiondiagram...............................................12Interface..................................................................18
IO-Linkmode................................................................10
L
LEDs..............................................................................10
M
Maintenance................................................................16
O
Operating instructions...................................................5
Q
Qualifiedpersonnel........................................................8Requirements...........................................................8
S
Safety..............................................................................7Electricalconnection..............................................11
Scopeofdelivery............................................................5SIOmode......................................................................10Software........................................................................13SOPASET......................................................................13Statusindicators..........................................................10Supply...........................................................................18
T
Technicaldata..............................................................17Troubleshooting............................................................16
U
USBConnectiondiagram...............................................12Interface..................................................................18
W
Wallplug.......................................................................12
Index
SICKAG | Waldkirch | Germany | www.sick.com
8017387/2014-03-03∙BG
A/ITL(2014-03)∙A44cint42 Australia
Phone+61394570600 1800334802–toll-freee-mail [email protected]
Belgium/LuxembourgPhone+32(0)24665566e-mail [email protected]
Czech [email protected]
ChinaPhone+864000121000e-mail [email protected]+852-21536300e-mail [email protected]
germanyPhone+492115301-301e-mail [email protected]
SpainPhone+34934803100e-mail [email protected]
FrancePhone+33164623500e-mail [email protected]
UKPhone+44(0)[email protected]
IndiaPhone+91–22–[email protected]
ItalyPhone+3902274341e-mail [email protected]
JapanPhone+81(0)[email protected]
NetherlandsPhone+31(0)302292544e-mail [email protected]
Norway [email protected]
AustriaPhone+43(0)[email protected]
PolandPhone+48228374050e-mail [email protected]
russiaPhone+7-495-775-05-30e-mail [email protected]
SloveniaPhone+386(0)[email protected]
South [email protected]
South KoreaPhone+8227866321/[email protected]
SwedenPhone+46101101000e-mail [email protected]
TaiwanPhone+88622375-6288e-mail [email protected]
turkeyPhone+90(216)[email protected]
United Arab EmiratesPhone+971(0)48865878e-mail [email protected]
USA/MexicoPhone+1(952)941-6780 1(800)325-7425–[email protected]
Morerepresentativesandagenciesat www.sick.com