sign manual - lse home · issue 6: 14.06.2010 1.0 introduction this sign manual contains a concise...
TRANSCRIPT
Issue 6: 14.06.2010
Contents
1.0 Introduction
2.0 Graphic elements 2.1 Logos
2.2 Typeface
2.3 Typography
2.4 Arrows
2.5 Pictograms
2.6 Colour specification
2.7 DDA compliance
3.0 Wayfinding strategy 3.1 Address and coding
3.2 Sign trail
3.3 Internal room numbering
3.4 Residential wayfinding
4.0 Mapping 3.1 Campus map
3.2 Navigation point map
5.0 Internal sign system 5.1 Internal sign family
5.2 Positioning guide
5.3 SDIR/LDIR: Stair/Lift directory
5.4 SDIR/LDIR-F: Stair/Lift directory freestanding
5.5 FCL: Fret-cut letters
5.6 EID: Entrance ID
5.7 DIR: Directional
5.8 DIR-2: Directional/Level ID
5.9 LID: Level ID
5.10 END-R1: Endpoint A4 wallet
5.11 END-R2: Endpoint A6 wallet
5.12 END-R3: Endpoint room
5.13 END-R4: Endpoint toilet wall mounted
5.14 END-R5: Endpoint toilet door mounted
5.15 END-R6: Endpoint projecting
5.16 END-R7: Endpoint residential
5.17 FID: Facilities
5.18 INS: Instruction holder
5.19 Donor plaques
5.20 Donor board
6.0 External sign system 6.1 External sign family
6.2 GAW: Gateway signs
6.3 LOG-L: Logo plaque 600mm sq
6.4 LOG-S: Logo plaque 300mm sq
6.5 GLS: Glass screen
6.6 BID-1: Building ID
6.7 BID-2: Building ID
6.8 BID-3: Building ID
6.9 NAV: Navigation point
6.10 CAM: Campus map 600mm sq
6.11 DIR: Directional
6.12 POB: Poster boards
6.13 FID-1: Facilities
6.14 FID-2: Facilities
7.0 Appendix I Supplier contact details
II GA drawings
III DDA report
IV Statutory signage
8.0 The CD
Issue 6: 14.06.2010
1.0 Introduction
This Sign Manual contains a concise record of the information relating to the graphics and manufacture of the LSE sign system.
It incorporates detailed guidelines for laying out the sign graphics and re-producing the maps, plus lift and building diagrams.
This Manual will enable suppliers to produce signs for the LSE to exact specifications ensuring continuity across the entire sign family.
With this Manual is a CD containing an electronic copy of the Manual which includes fonts, graphic elements, templates and manufacturing drawings.
Issue 6: 14.06.2010
2.0 Graphic elements
All the graphic elements needed to create the LSE signage can be found in folder '01 Graphic Elements' on the accompanying CD and includes:
• Fonts
• Logos
• Arrows
• Pictograms
Issue 6: 14.06.2010
2.1 Logos The LSE logo is the main branding symbol for the School and it is important to ensure consistency that the vectored logo supplied on the CD should be used.
Either the full or abbreviated logo may be used in the colour ways shown below.
It is important to keep the LSE logo clear of any other graphics. The minimun clear space or exclusion zone around the logo is shown below.
The logos shown below are supplied with this Manual: CD: 01 Graphic Elements > LSE Logos
LSE logo full
LSE logo abbreviated
x x
xx
x
x x
x
x
xx
LSE logo exclusion zone
Issue 6: 14.06.2010
2.2 Typeface Frutiger is the LSE corporate typeface and should be the only typeface used in the sign system. Three Frutiger weights have been chosen to establish a visual message hierachy and should generally be used as follows:
Frutiger Light 45: used for secondary and or supporting messages
Frutiger Roman 55: informtion text
Frutiger Bold 65: destinations or headline text
The use of upper and lower case should be applied across all information signage.
The controlled use of typeface and text weights will ensure consistency is maintained throughout the School.
Refer to individual sign type drawings in Sections 5.0 and 6.0 for specifications regarding text heights and positioning.
The fonts shown are supplied with this Manual: CD: 01 Graphic Elements > Fonts
Frutiger Light 45
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz 1234567890
Frutiger Roman 55
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz 1234567890
Frutiger Bold 65
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz 1234567890
Issue 6: 14.06.2010
2.3 Typography Both the internal modular sign system and exterior signage allows for a certain amount of flexibility and freedom of text size and layout, so an assessment must be made regarding text size and viewing distance of the sign plus space available.
Legibility
In addition to type size, distinctive shape is an important factor for legibility. Therefore type should be set in both upper and lower case, because people read primarily by word shape. The first letter of each key word should always begin with a capital letter.
Letter spacing
All typesetting should be done in Adobe Illustrator with normal tracking, characters to be individually letter spaced where required.
The correct use of capitals. Having a capital letter at the beginning of words helps in defining a unique shape and definition, this will improve legibility even for people with blurred vision.
Issue 6: 14.06.2010
2.4 Arrows Only the arrow shown below is to be used in the sign system. The arrow should rotate about its axis in the seven directions shown below.
Arrows should be applied in consistent zones to ensure clarity of the message. They should always be in close proximity to the message they refer to, so that there is no ambiguity.
120% x
x
x
200% x
x
In most applications the weight or thickness of the arrow stroke should be the same as the weight of the relevant capital letter. Refer to individual sign type drawings for specifications regarding proportion, colour and positioning.
The arrows shown are supplied with this Manual: CD: 01 Graphic Elements > Arrows
Issue 6: 14.06.2010
2.5 Pictograms The use of pictograms where appropriate can be beneficial to a sign system as they are understood by a variety of user groups. The International Standard pictograms should be used on both the external and internal signage as they offer a wide range of proven legible and recognisable options. Refer to individual sign type drawings for specifications regarding proportion and positioning.
X
50% X 25% X
120%X 120% X
When pictograms are used in conjunction with running text they appear within a box, when used in isolation on a sign they can be reversed out.
The icons shown below are supplied with this Manual: CD: 01 Graphic Elements > Pictograms
Issue 6: 14.06.2010
2.6 Colour specifications The signage colour scheme uses the existing School colour palette of red, black and white plus the use of silver and a palette of Pantone Cool Grays. All colours should be approved before manufacture. It is generally applied as follows:
Pantone 485
Vinyl: 3M 220-253
RAL 3020
Black
Vinyl: 3M 220-12
RAL 9017 semi-gloss
Metallic silver
Vinyl: 3M 220-120
RAL: 9006 Silver 600 line with matt base coat
White
Vinyl: 3M 220-10
RAL 9003 semi-gloss
Red: Pantone 485 primarily used for the School logo, as a high-light colour and to reinforce the LSE brand on directional signage.
Black: primarily used for the School logo if required.
White: primarily used for text on dark backgrounds.
Grey: Cool Grey 11 primarily used for text and building sign backgounds. Also used with a secondary palette of Pantone Cool Grays on mapping.
Metallic silver: primarily used as the background colour on the internal signage.
Pantone Cool Gray 11
Vinyl: 3M 220-101
RAL: 7012
Issue 6: 14.06.2010
2.7 Disability Discrimination Act compliance
To comply with the Disability Discrimination Act (DDA) the following should be considered and or applied:
All public accessible endpoints should be tactile.
Toilets should have both tactile and Braille information.
All lift and stair level identification signs should be tactile.
Stair level identification signs should be placed on the side of the hand rail, if there are rails on both sides then they should be installed on the right.
When Braille is used it should be Grade 1, this is a letter for letter transcription which can be read by all Braille users.
Braille should be placed below any text or pictogram and ranged left. A raised locator on the left hand side of the sign should be provided.
Signs should be placed on the leading edge of the door.
Signs should be installed where possible on a hanging line of 1500mm above floor level to ensure all tactile information is accessible.
The DDA report for the LSE sign system can be found in Appendix iii.
a1
b2
c3
d4
e5
f6
g7
h8
i9
j0
k l m n
o p q r s t u
v w x y z
6mm
3mm 2.3mm
2.54mm
2.54mm
0.46mm1.4mm
6mm
Typical examples of signs requiring tactile and/or Braille.
Specification for setting out Braille.
Issue 6: 14.06.2010
3.0 Wayfinding overview
The wayfinding system has been designed to lead the visitor from the Campus edge to an individual room, displaying only the level of information required at that decision point.
Externally it is map based with directional signs placed strategically around the campus to reassure the visitor negotiating the School Campus.
Internally it is direction based with room numbering allocated in logical blocks, using the building layout and architecture to provide suitable sequenced areas.
All the sign plans and schedules can be found in folder '06 Sign Plans Schedules' on the accompanying CD.
Issue 6: 14.06.2010
3.1 Address and coding
Pre-visit informationIt is vital to ensure that the same map, terminology, instructions and systems are used across all media.
Any information sent to visitors or obtained when on the site, e.g. hand held maps, will also need to be the same as what the potential visitor can obtain over the internet.
Address systemA standard address system should be implemented with a clear hierarchy on information adopted
Hierarchy of address information
1 Corporate name LSE
2 Building / code St Clements / STC
3 School/Department Xxxxxxx Xxxxxxx
4 Floor/level Floor 2
5 Room number 2.45 (first digit=level identifier)
Building codesBelow are the new building codes we propose, they are three letter codes based on the phonetics of the building name. In tests carried out these codes were the most intuitive:
Aldwych House ALD
The Anchorage ANC
Clare Market CMK
Clement House CLM
Columbia House COL
Connaught House CON
Cowdray House COW
East Building EAS
Garrick GRK
Kings Chambers KGS
20 Kingsway KSW
50 Lincoln’s Inn Fields 50L
Lincoln Chambers LCH
Lakatos LAK
Lionel Robbins Building LRB
New Academic Building NAB
Old Building OLD
Parish Hall PAR
Peacock Theatre PEA
1 Portsmouth Street POR
Queens House QUE
Sheffield Street SHF
St Clements STC
St Philips Health Centre SPH
St Philips North Block SPN
St Philips South Block SPS
Tower 1, Clements Inn TW1
Tower 2, Clements Inn TW2
Tower 3, Clements Inn TW3
Issue 6: 14.06.2010
To address the range of user groups and their information needs, various levels of information should be provided to take them from the boundary of the Campus to their destination. These are as follows:
External signs
Gateways – GAT
Placed at the main access points to the LSE, these signs will carry the brand and affirm to visitors that they have arrived at the School and give an important first impression of the LSE. They define the School boundaries.
Navigation points – NAV
These elements of the sign system are located around the boundary of the School. They provide not only detailed Campus information but also provide information such as Underground stations for visitors leaving the LSE.
Directionals – DIR
As people move around the site they will need reassurance and confirmation that they are moving in the right direction.
Campus maps – CAM
Campus maps should be positioned externally at the main entrances to each building. This provides wayfinding information for people leaving one building and looking for their next destination.
Building ID – BID
Clearly visible building ID signs aid people in reaching the building they are looking for. These simply confirm that people have arrived at the correct building.
Internal signs
Entrance ID – EID
The entrance signs will act as reassurance to let people know what building they are in and act as welcome signs which will carry the LSE brand.
Level directories – LDIR/SDIR
These directories will be situated at building entrances and / or by lift doors and some stairs.
The directory informs people of what department, room, facility etc is on each floor, as well as highlighting what floor a visitor is currently on.
3.2 Sign trail
Level IDs – LID
A level ID will let people know what level they are on. They may take different forms depending on where they are located. These could be:
at the top and bottom of stairs there will be a requirement to state which floor people have reached.
level ID's may also be used as people exit from a lift or enter a building from a bridge, therefore a level ID can be combined with a directional sign.
Directional – DIR
Directional information will be present where relevant and will direct people to room numbers and information about spaces that is unlikely to change.
Room ID – END
Room IDs will take a number of forms depending on the type of room or space, this is detailed in Section 5 of this manual.
•
•
Issue 6: 14.06.2010
3.3 Internal room numbering The allocation of simple, readily-understood room numbering is an essential element of the wayfinding system, to guide the user to the correct end point. Examples of good room numbering can often be found in hotels.
Architectural building numbers
Architectural plans will include room numbers, however, in the case of new construction the architect will allocate ‘building numbers’ for every space in the building. This exhaustive numbering is required during building works but is overly detailed and cumbersome for day-to-day use once the building becomes operational.
Spaces to omit from room numbering
The final room numbering sequence should omit services/ducts/corridors/lobbies and similar spaces, all of which carry building numbers but which interrupt or confuse the consistent flow of the main operational sequence.
Room numbering
The room numbering system should reflect the same fundamental principles for all School buildings so that a common approach and understanding applies across the entire LSE estate:
the first digit of the room number indicates the floor/level
allocation of numbers should start from the most immediately obvious space at point of entrance to a building or arrival on a floor
numbering should be in a clockwise direction around clearly defined circular routes or zones
in corridors – numbering should be in street numbering fashion i.e. across and down the corridor rather than consecutive numbers along one side, then the other
Toilets should be included.
Numbering across floors
Numbering allocation across floors is single sequence per floor i.e. each floor starts again at 1, differentiated by the floor identifier prefix i.e. G.01, 1.01, 2.01...
While acknowledging all the above, it should be remembered that room numbering is there to assist wayfinding. Ultimately it is more important to have an allocation that is clear and workable for the majority of users and visitors than one that slavishly imposes a system that may seem logical on paper but creates confusion in situ!
•
•
•
•
•
5.02
5.01
5.11
WC
Dis WC
5.03
5.045.05
5.06 5.07 5.08 5.09 5.12 5.14 5.16 5.18
5.19
5.20
5.22
5.245.23
5.21
5.175.155.13
5.10
Issue 6: 14.06.2010
3.4 Residential wayfinding Rationale
User journey
By also considering the different users of the building (from students to summer visitors) and their possible journeys through the buildings, a system that will be functional and usable can be implemented. Users must be supported throughout their whole journey, from the point at which they arrive outside a building, to when they leave the building.
Sign family
The sign family will provide the necessary information at each point at which people will have to make a decision about which way to turn. These decision points have been illustrated on the diagram to the right and are points at which signage should be visible from. The diagram is an example of a journey from outside High Holborn to a flat on the 1st floor.
ground floor 1st floor
This section will provide LSE with the necessary tools to implement a signage system in all residential buildings.
Consideration should be given to various uses of the areas within the buildings, as well as how they differ during term time and the summer.
Issue 6: 14.06.2010
3.4 Residential wayfinding Sign location plan & schedule
In order to equip a sign manufacturer with the relevant information, it is important to provide them with information about where the signs will go and what they will say. These two pieces of information must be developed together and they are known as a sign location plan and a schedule. An example of these can be found below.
The sign location plan shows the sign types differentiated by colour and shape (shown in the key), each with their own number. No number should be used twice within a building as this can cause confusion.
The numbers then relate to the schedule which shows the room on the plans, the sign type and the message to be written on the sign. The sign types can be found on the following pages.
The sign family simplifies the process of selecting signs for use. There are rules attached to the signs in terms of when they should be used and positioning. The signs and their usage is outlined on the following pages. Specifications for the sign types can be found in Sections 5 and 6.
000 FID – Facility sign
000 SDIR/LDIR – Lift/Stair Directory
000 EID – Entrance ID sign
000 BID – Building ID sign
END-R – Room Sign000
DIR – Directional sign000
LID – Level ID sign000
011
009
008
010
007
003
005
004 006
002
001
000 FID – Facility sign
000 SDIR/LDIR – Lift/Stair Directory
000 EID – Entrance ID sign
000 BID – Building ID sign
END-R – Room Sign000
DIR – Directional sign000
LID – Level ID sign000
056
057
055
073
072
065064
079078 077 076
075
070
074
071
069
068067066
060
063
062
059
058
061
Sign Location Plan
Schedule
Issue 6: 14.06.2010
3.4 Residential wayfinding Sign family
Building ID – BID-1 & BID-w3
Purpose Clearly visible building ID signs aid people in reaching the building they are looking for. They confirm that people have arrived at the correct building.
Positioning Building ID's should be clearly visible from all approaches to the building. They should be able to be seen above peoples' heads and any cars parked in front of the building.
Entrance ID – EID
Purpose The entrance signs will act as reassurance to let people know what building they are in and act as welcome signs which will carry the LSE brand.
Positioning Entrance ID's must be visible as people enter the building lobby and not placed where objects may be positioned in front of them.
Level directories – LDIR/SDIR
Purpose These directories will be situated at building entrances if this is considered relevant and by lift doors. They will give people information about which floor they require. If stairs are a primary way of moving between floors, then these signs should be located in the relevant stairwells. Level directories are not necessary for back stairs as these are generally used by people who know the building well.
Positioning Level directories should be positioned so that they are visible in the lift (or stair) areas. They can be visible both when you enter or exit the lift, depending on what space is available.
High Holborn
High HolbornResidence
178 High Holborn WC1V 7AA
High HolbornResidence
High Holborn
1
2
G
B Study RoomTV LoungeLaundry Room
ReceptionIT Room
Flats 1.1 to 1.09Rooms 1.01 to 1.27
Flats 2.1 to 2.09Rooms 2.01 to 2.27
3 Flats 3.1 to 3.09Rooms 3.01 to 3.27
4 Conference RoomRooms 2.01 to 2.27
Cleaners Cupboard
Kitchen10.27
10.27
High Holborn
High HolbornResidence
178 High Holborn WC1V 7AA
High HolbornResidence
High Holborn
1
2
G
B Study RoomTV LoungeLaundry Room
ReceptionIT Room
Flats 1.1 to 1.09Rooms 1.01 to 1.27
Flats 2.1 to 2.09Rooms 2.01 to 2.27
3 Flats 3.1 to 3.09Rooms 3.01 to 3.27
4 Conference RoomRooms 2.01 to 2.27
Cleaners Cupboard
Kitchen10.27
10.27
High Holborn
High HolbornResidence
178 High Holborn WC1V 7AA
High HolbornResidence
High Holborn
1
2
G
B Study RoomTV LoungeLaundry Room
ReceptionIT Room
Flats 1.1 to 1.09Rooms 1.01 to 1.27
Flats 2.1 to 2.09Rooms 2.01 to 2.27
3 Flats 3.1 to 3.09Rooms 3.01 to 3.27
4 Conference RoomRooms 2.01 to 2.27
Cleaners Cupboard
Kitchen10.27
10.27
Issue 6: 14.06.2010
3.4 Residential wayfinding Sign family
Level IDs – LID
Purpose A level ID will let people know what level they are on.
Positioning Level ID's will mostly be located at the top and bottom of stairs to state which floor people have reached. Level ID's may also be used as people exit from a lift or enter a building from a bridge, and in these instances a level ID can be combined with a directional sign.
Directional – DIR / DIR2
Purpose Directional information will be present at key decision points in a person's journey. These will mostly be found in corridors and at the exit points from lifts and stairs. They will direct people to room numbers and information about spaces that is unlikely to change (e.g. computer rooms, kitchens). Directional signs are not relevant for small areas such as within flats, as it will not take people long to search for the room they are looking for.
Positioning These signs should be positioned so that it is clear which direction the visitor should go in. If they must go through doors, the signs can be positioned on the wall next to the door or on the door if there is not sufficient space.
Room ID – END-R7 / FID-1
Purpose Room IDs will take a number of forms depending on the type of room or space. These are outlined below:
FID-1: These signs are used for any room that has a set purpose, for example; kitchen, computer room, library, study room, laundry, flat number. They will be tactile.
END-R7: These signs will be used for flat and room numbers within flats. They will be tactile.
Positioning FID-1: When these signs are to be viewed by the public they should ideally be positioned on the wall on the handle side of the door. If this will cause confusion with another door or there is no space, they should be placed on the door. For back of house signs (e.g. store, staff rooms) signs should be placed on the door.
END-R7: These signs will be place on the relevant door.
High Holborn
High HolbornResidence
178 High Holborn WC1V 7AA
High HolbornResidence
High Holborn
1
2
G
B Study RoomTV LoungeLaundry Room
ReceptionIT Room
Flats 1.1 to 1.09Rooms 1.01 to 1.27
Flats 2.1 to 2.09Rooms 2.01 to 2.27
3 Flats 3.1 to 3.09Rooms 3.01 to 3.27
4 Conference RoomRooms 2.01 to 2.27
Cleaners Cupboard
Kitchen10.27
10.27
High Holborn
High HolbornResidence
178 High Holborn WC1V 7AA
High HolbornResidence
High Holborn
1
2
G
B Study RoomTV LoungeLaundry Room
ReceptionIT Room
Flats 1.1 to 1.09Rooms 1.01 to 1.27
Flats 2.1 to 2.09Rooms 2.01 to 2.27
3 Flats 3.1 to 3.09Rooms 3.01 to 3.27
4 Conference RoomRooms 2.01 to 2.27
Cleaners Cupboard
Kitchen10.27
10.27
High Holborn
High HolbornResidence
178 High Holborn WC1V 7AA
High HolbornResidence
High Holborn
1
2
G
B Study RoomTV LoungeLaundry Room
ReceptionIT Room
Flats 1.1 to 1.09Rooms 1.01 to 1.27
Flats 2.1 to 2.09Rooms 2.01 to 2.27
3 Flats 3.1 to 3.09Rooms 3.01 to 3.27
4 Conference RoomRooms 2.01 to 2.27
Cleaners Cupboard
Kitchen10.27
10.27
Issue 6: 14.06.2010
3.4 Residential wayfinding Installation guide
1600mm
80mm
40mm
40mm
80mmFacility nameplate centred on door
Facility number
Sign positioning
Signs to be hung at 1600mm high to allow accessibility to tactile information
User room signs to be placed on leading edge of door 80mm from architraving
Operational signage to be placed on doors
Stair signage to be placed on the same side as the handrail or if not possible – then on the right going up the stairs
Issue 6: 14.06.2010
4.0 Mapping
All maps for the LSE sign system can be found in folder '02 Mapping' on the accompanying CD and include:
• Campus map
• Navigation map
Issue 6: 14.06.2010
4.1 Campus map A heads-up mapping strategy has been adopted for the LSE i.e. the map is orientated in the direction the map user is facing.
The map is square to enable it to fit on structures in all orientations.
The master map has been orientated to a perceived North respecting the user’s interaction with the LSE campus and surrounding area.
Maps have been rotated in 5 orientations : 0° (North South), 45°, 90°, 135°, 180°, 225°, 270°and 315°.
The Campus maps with all rotations required is supplied on the CD as Adobe Illustrator files. The files are set up with layers enabling the 'You are Here' indicators to be moved as required and individual files to be saved off for printing/manufacture.
The file is set up complete with crop marks for aligning on external signage.
The maps are supplied on CD: CD: 02 Mapping > Campus Map > Campus_Map_300_0_V1 > Campus_Map_600_0_V1
PORSHF
50L
New AcademicBuilding
KGS
TW1
ANC
TW2
TW3
COWLAK
Old Building
StudentServices
Main Library
MainReception
PEA
Lionel RobbinsBuilding
CON
ALD
COL
ClementHouse
EastBuilding
ClareMarket
SPH
PAR
SPS
SPN
LCH
KSW
Lincoln’s Inn Fields
Royal Courtsof Justice
Royal Collegeof Surgeons
St Clement’s
AustraliaHouse
Bush House
GRANGE COURTCLARE M
ARKETJOHN W
ATKINSPLAZA
SHEF
FIELD
STREE
T
PORTSMOUTH ST
CLEMENT’S INN
CLE
MEN
T’S
INN
HOUGHTON ST
REET
CAREY STREET
CAREY STREET
STRAND STRAND
VICTORIA EMBANKMENT
STRAND
LAN
CA
STER
PLA
CE
HIGH HOLBORNHIGH HOLBORN
KIN
GSW
AY
AR
UN
DEL
STR
EET
SARDINIA STREET
GREAT QUEEN STREET
LONG ACRE
WILD STREET
WELLIN
GTO
N STREET
BOW
STREET
DRU
RY LA
NE
DRU
RY LAN
E
RUSSELL STREET
KEMBLE STREET
LINCOLN’S INN FIELDS
LINCOLN’S INN FIELDS
PORTUGAL STREET
NEW
MA
N’S
RO
WSE
RLE
STR
EET
PORTUGAL STREET
ST CLEMENT’S LANE
To Waterloo Station
To Charing Cross Station
To Covent Garden
Temple
Holborn
KEMBLE STREET
ALDWYCH
ALD Aldwych HouseANC The AnchorageCMK Clare MarketCLM Clement HouseCOL Columbia HouseCON Connaught HouseCOW Cowdray HouseEAS East BuildingKGS King’s ChambersKSW 20 KingswayLAK LakatosLCH Lincoln Chambers 50L 50 Lincoln’s Inn FieldsLIB Main Library/ Lionel Robbins Building NAB New Academic BuildingOLD Old BuildingPAR Parish HallPEA Peacock TheatrePOR 1 Portsmouth StreetSHF Sheffield StreetSTC St Clement’sSPH St Philips Health CentreSPN St Philips North BlockSPS St Philips South BlockTW1 Tower 1TW2 Tower 2TW3 Tower 3
Building Codes
Key
Accessible Entrance
Accessible Lift
Ramp
Café
Restaurant
You are Here
NB As well as a 'you are Here' indicator, the users position is also high-lighted by changing the adjacent building to red.
Issue 6: 14.06.2010
4.2 Navigation map As the Navigation map will be on a free standing structure, there is only a need for a North /South map. The user will be able to walk around it to orientate themselves
The navigation map is supplied on the CD as an Adobe Illustrator file. The file is set up with layers enabling
the 'You are Here' indicator to be moved as required and individual files to be 'saved as' for printing/manufacture.
The map shown below is supplied with this Manual: CD: 02 Mapping > Navigation Map > LSE_NAV_Map_0_v1
POR
SHF
50L
New AcademicBuilding
KGS
TW1
ANC
TW2
TW3
COW
LAK
Old Building
StudentServices
Main Library
MainReception
Old Theatre
New Theatre
Hong KongTheatre
PeacockTheatre
Lionel RobbinsBuilding
CON
ALD
COL
ClementHouse
East Building
ClareMarket
SPH
PAR
SPS
SPN
LCH
The Sheikh ZayedTheatre
Royal Courtsof Justice
Middle andInner TempleInns of Court
Royal Collegeof Surgeons
Bush House
AustraliaHouse
Lincoln’s Inn Fields Lincoln’s InnNew Hall
St Mary Le Strand Chruch
St Clement DanesRAF Church
Victoria Embankment Gardens
Somerset House King’s College London
St Clement’s
KSW
Holborn
To Covent GardenApproximately 10 minutes walk
To Charing CrossApprox 10 minutes walk
To EmbankmentApprox 10 minutes walk
To Waterloo StationApprox 12 minutes walk
Temple
GRANGE COURT
CLARE MARKET
JOHN WATKINS
PLAZA
SHEF
FIELD
STREE
T
PORTSMOUTH ST
CLEMENT’S INN
CLE
MEN
T’S
INN
HOUGHTON ST
REET
CAREY STREET
CAREY STREET
ALDWYCH
STRAND
FLEET STREET
VICTORIA EMBANKMENT
River Thames
STRAND
LAN
CA
STER
PLA
CE
HIGH HOLBORNHIGH HOLBORN
KIN
GSW
AY
AR
UN
DEL
ST
TEMPLE PLACE
SARDINIA STREET
GREAT QUEEN STREET
WILD
STREET
WEL
LIN
GTO
N S
T
BOW
STREET
DRU
RY LA
NE
DRU
RY LA
NE
RUSSELL STREET
TAVISTOCK STREET
KEMBLE STREET
CATHERIN
E ST
LINCOLN’S INN FIELDS
LIN
CO
LN’S
I
NN
FIE
LDS
NEW SQUARE
LINCOLN’S INN FIELDS
PORTUGAL STREET
NEW
MA
N’S
RO
WSE
RLE
STR
EET
PORTUGAL STREET
ST CLEMENT’S LANE
You are Here
Buiding Codes
ALD Aldwych House
ANC The Anchorage
CMK Clare Market
CLM Clement House
COL Columbia House
CON Connaught House
COW Cowdray House
EAS East Building
KGS Kings Chambers
KSW 20 Kingsway
LAK Lakatos
LCH Lincoln Chambers
50L 50 Lincoln’s Inn Fields
LIB Main Library/ Lionel Robbins Building
NAB New Academic Building
OLD Old Building
PAR Parish Hall
PEA Peacock Theatre
POR 1 Portsmouth Street
SHF Sheffield Street
STC St Clements
SPH St Philips Health Centre
STN St Philips North Block
SPS St Philips South Block
TW1 Tower 1
TW2 Tower 2
TW3 Tower 3
Key
Underground Station
Accessible Lift
Ramp
Bicycle Parking
Cash Point
InformationAccessible Entrance
Main Line Station
London River Services
Bus Stop
Restaurant
Bar / Pub
Post Office
Café
Issue 6: 14.06.2010
5.0 Internal sign system
The specification for the School internal sign system can be found on the following pages. The graphic templates needed to create the artwork can be found in folder '03 Internal Sign Templates'. Detailed engineering drawings to manufacture the signage can either be found in Appendix ii or in folder '05 GA Drawings' on the accompanying CD.
Issue 6: 14.06.2010
5.1 Internal sign family
LG
FS7501
FS7501
Cleaners Cupboard
CCTV in OperationA CCTV system operates in this area for the purposes of crime prevention and public safety.
The system is operated by the London Schoolof Economics and Political Science.
For further information contact the security control room on 020 7955 6200
been specified for endpoints including toilets, seminar and lecture theatres. Stair and lift signage will also have to have tactile level information.
Illustrated below are the main sign types with reference codes for the internal sign system.
The internal signage is a bespoke system designed to suit the needs of the LSE, but incorporates elements of the Modular Sign System (MSS) and on some signs the APCO Notifier product. Full details for manufacturing the signs are on the following pages
In line with best practice, tactile signage will have to be incorporated into the system, which will mean the anodised finish to be sprayed silver. Tactile panels have
SDIR/LDIR: Stair/Lift directory
DIR-1: Directional
LID: Level ID
DIR-2: Directional with level id
FCL: Fret-cut individual letters
END-R1: Room ID with A4 paper carrier
END-R2: Room ID with quater A4 paper carrier
END-R4/5: Toilet ID with tactile and Braille
FID-1: Facilities door sign
FID-2: Facilities number
INS: A4 or A3 instruction holder
FID-3: Internal CCTV
Issue 6: 14.06.2010
5.2 Positioning guide It is important that the signs be installed to a consistent standard of height and alignment. Each building will have its own particular architectural and decorative features and these should be taken into consideration when establishing sign positions. The illustration below shows typical examples and should be used as a guide only.
Where possible the following should be taken into consideration:
Signs to be placed at 1600mm high to allow accessibility to tactile information.
Room signs should be placed on leading edge of door 80mm from architraves, apart from the utilities signs (i.e. electrical riser) which should ideally be placed on the actual door.
Stair signage to be placed on the same side as the handrail or if not possible – then on the right going up the stairs.
•
•
•
Hong Kong Theatre
Rooms 4.01 to 4.05
Toilets
Robinson Rooms Suite
The Thai Theatre
Rooms 4.06 to 4.10
Toilets
LG
FS7501 Cleaners Cupboard
1600mm
80mm
40mm
40mm
80mmFacility nameplate centred on door
Facility number
Sign positioning
Signs to be hung at 1600mm high to allow accessibility to tactile information
User room signs to be placed on leading edge of door 80mm from architraving
Operational signage to be placed on doors
Stair signage to be placed on the same side as the handrail or if not possible – then on the right going up the stairs
Issue 6: 14.06.2010
5.3 SDIR/LDIR: Stair/Lift directory Shown is a typical stair/lift directory, the size will vary from building to building depending on the number of floors and information required.
Construction
Wall mounted sign consisting of an aluminium panel with a metallic silver finish mounted on a back tray sprayed white.
1
4
2
G
LG
7 School of LawLaw CourtRooms 7.01 to 7.28
6 School of LawRooms 6.01 to 6.24
8 Executive Board RoomsRoof Terrace
School of ManagementRooms 4.01 to 4.23
3 School of ManagementRooms 3.01 to 3.31
Aman TheatreThai TheatreLecture Halls 1 & 2Cloakroom
Reception Halls 1 & 2Café
General TeachingRooms 1.01 to 1.32Café
School of ManagementRooms 2.01 to 2.29
5 School of ManagementRooms 5.01 to 5.27
New AcademicBuilding
90
500
90
30
25
14
25
50
50
30
1515151515
50
50
50
50
50
50
50
50
50
Depth to suitin 50mmincrements
CL
Typeset: Frutiger 45 Light 125pt
Typeset: Frutiger 65Bold 125pt
Typeset: Frutiger 55 Roman 60/85pt
Graphics
Applied vinyl text and graphics: Grey: 3M 220-101 Red: 3M 220253
A graphic template and engineering drawing for this sign type is supplied on CD: 03 Interior Sign Templates > SDIR_LDIR_Template 05 GA Drawings > 3487.16.pdf
1
4
2
G
LG
7 School of LawLaw CourtRooms 7.01 to 7.28
6 School of LawRooms 6.01 to 6.24
8 Executive Board RoomsRoof Terrace
School of ManagementRooms 4.01 to 4.23
3 School of ManagementRooms 3.01 to 3.31
Aman TheatreThai TheatreLecture Halls 1 & 2Cloakroom
Reception Halls 1 & 2Café
General TeachingRooms 1.01 to 1.32Café
School of ManagementRooms 2.01 to 2.29
5 School of ManagementRooms 5.01 to 5.27
New AcademicBuilding
90
500
90
30
25
14
25
50
50
30
1515151515
50
50
50
50
50
50
50
50
50
Depth to suitin 50mmincrements
CL
Typeset: Frutiger 45 Light 125pt
Typeset: Frutiger 65Bold 125pt
Typeset: Frutiger 55 Roman 60/85pt
Issue 6: 14.06.2010
1
2
G
LG Aman TheatreThai TheatreLecture Halls 1 & 2Cloakroom
Reception Halls 1 & 2Café
General TeachingRooms 1.01 to 1.32Café
School of ManagementRooms 2.01 to 2.29
90
450
30
501515151515
50
50
90approx 1200
CL
Typeset: Frutiger 45 Light 125pt
Typeset: Frutiger 65Bold 125pt
Typeset: Frutiger 55 Roman 60/85pt
1
2
G
LG Aman TheatreThai TheatreLecture Halls 1 & 2Cloakroom
Reception Halls 1 & 2Café
General TeachingRooms 1.01 to 1.32Café
School of ManagementRooms 2.01 to 2.29
90
450
30
501515151515
50
50
90approx 1200
CL
Typeset: Frutiger 45 Light 125pt
Typeset: Frutiger 65Bold 125pt
Typeset: Frutiger 55 Roman 60/85pt
Shown is a freestanding stair directory, the size will vary from building to building depending on the number of floors and information required.
Construction
Freestanding sign consisting of an 5mm aluminium panel with a metallic silver finish mounted in a standard MSS 'FSS Footprint Aerofoil'.
Graphics
Applied vinyl text and graphics: Grey: 3M 220-101 Red: 3M 220253
A graphic template and engineering drawing for this sign type is supplied on CD: 03 Interior Sign Templates > SDIR_F_Template 05 GA Drawings > 3487.19.pdf
5.4 SDIR-F: Freestanding stair directory
Issue 6: 14.06.2010
5.5 FCL: Fret-cut individual letters Graphics
Text: Frutiger Bold 65 Typeset: to suit space available Where a message runs over 2 lines typeset line spacing at 20%
A graphic template and engineering drawing for this sign type is supplied on CD: 03 Interior Sign Templates > FCL_Template 05 GA Drawings > 3487.13.pdf
X
X
Text: Frutiger Bold 65Typeset: to suit space availableWhere a message runs over 2 lines typeset lines spacing at 20%
Shown is an example of individual fret-cut letters. It is envisaged they are used for major destinations such as main lecture theatres. Depending on the backgound colour on which the letters are to be placed then either dark grey or stainless steel can be used
Construction
3mm thick aluminium powdercoated dark grey (Cool gray 11) or brushed stainless steel spaced off the wall by 10mm
Issue 6: 14.06.2010
5.6 EID – Entrance identification Shown is an entrance ID, there are two versions: for smaller buildings there is a 300 x 300mm panel, for larger buildings the fret-cut letters should be used (sign type FCL).
Construction
The panel sign is a wall mounted sign consisting of an aluminium panel with a metallic silver finish mounted on a back tray sprayed white.
Graphics
Applied vinyl text and graphics: Grey: 3M 220-101 Red: 3M 220-253 White: 3M 220-10
A graphic template and engineering drawing for this sign type is supplied on CD: 03 Interior Sign Templates > EID_Template 05 GA Drawings > 3487.17.pdf
50 Lincoln’sInn Fields
22.5
300
300
22.5
22.5
31
75
Heightto suit
15
22
22
Issue 6: 14.06.2010
5.7 DIR: Directional
Hong Kong Theatre
Rooms 4.01 to 4.05
Toilets
Robinson Rooms Suite
The Thai Theatre
Rooms 4.06 to 4.10
Toilets
22.5
300 300
300
22.5
22.5
22.5
22.5
75
15
15
15
17
17
22.5 22.5
22.5
22.5
22.5
75
15
15
15
17
1517
17
Text: Frutiger 55 Roman 60/90pt7.5
18 184
Graphics
Applied vinyl text and graphics: Grey: 3M 220-101 Red: 3M 220253 White: 3M 220-10
A graphic template and engineering drawing for this sign type is supplied on CD: 03 Interior Sign Templates > DIR_1_Template 05 GA Drawings > 3487.17.pdf
Shown is a directional sign, if space permits each direction will have a seperate panel. These panels can be mounted either horizontally or vertically with a space of 10mm between them.
Construction
Wall mounted sign consisting of an aluminium panel with a metallic silver finish mounted on a back tray sprayed white. When installing on glass, the back tray should be installed onto applied silver vinyl cut the same size as the tray.
Optional positioning
Issue 6: 14.06.2010
5.8 DIR-2: Level identification/directional Shown is a combination directional and level ID sign to be used when there is a lack of space to install separate level ID and directional signs. The signs can be enlarged in 100mm increments vertically to accommodate longer messages.
Construction
Wall mounted sign consisting of an aluminium panel with a metallic silver finish mounted on a back tray sprayed white. When installing on glass, the back tray should be installed onto applied silver vinyl cut the same size as the tray.
Graphics
Applied vinyl text and graphics: Grey: 3M 220-101 Red: 3M 220253 White: 3M 220-10
A graphic template and engineering drawing for this sign type is supplied on CD: 03 Interior Sign Templates > DIR_2_Template 05 GA Drawings > 3487.17.pdf
Rooms 4.06 to 4.10
Toilets
Rooms 4.11 to 4.18
Rooms 4.06 to 4.10
Toilets
Rooms 4.11 to 4.18
Hong KongLecture Theatre
Restaurant
22.5 22.5
300 300
22.5
22.5
22.5
75
1515
15
30
300 400
15
7.518 18
4
15
17
30
1515
1517
15
1515
15
1517
11
17
30
30
22.5 22.5
22.5
22.5
22.5
75
Numeral: Frutiger 65 Bold 200ptText: Frutiger 55 Roman 60/90pt Where a message runs over 2 lines typeset 60/72pt
Issue 6: 14.06.2010
5.9 LID: Level identification Shown is a level ID, this sign will need to incorporate a tactile numeral.
Construction
Wall mounted sign consisting of an aluminium panel with a metallic silver finish mounted on a back tray sprayed white. When installing on glass, the back tray should be installed onto applied silver vinyl cut the same size as the tray.
Graphics
Applied vinyl text with tactile numeral: Grey: 3M 220-101 Red: to match Pantone 485 White
A graphic template and engineering drawing for this sign type is supplied on CD: 03 Interior Sign Templates > LID_Template 05 GA Drawings > 3487.12.pdf
Floor
3
Floor
BFloor
GFloor
1Floor
2Floor
3Floor
4Floor
5Floor
6Floor
7Floor
8Floor
9Floor
10Floor
LG
135
210
210
Typeset ‘Floor’ Frutiger 65 Bold 80ptTypeset numeral Frutiger 65 Bold 330pt
Tactile numeraland red square
16
19
135
16
C L
Issue 6: 14.06.2010
5.10 END-R1: Endpoint A4 wallet
Lecture TheatreG.00 G.00 Seminar RoomLine Two if Reqd
16 30 16 10
300 300
1530
2
40
A4landscapewallet
A4landscapewallet
15
10
Tactile text: Frutiger 65 Bold Typeset text: 60/64pt word spacing 10mm letter spacing +20
CL
16 30 16
3060
25
15
CL
Tactile numeraland backgroundTypeset numeral: 32pt
Tactile numeraland background
Shown is an endpoint room sign generally to be used outside lecture theatres and seminar rooms. This sign will need to incorporate a tactile room number. Depending on length of message there are two sizes of slat.
Construction
Wall mounted sign consisting of an MSS slat with a metallic silver finish and a A4 clear acrylic wallet, mounted on a back tray sprayed white. Clear wallet to be backed-up with silver metallic vinyl. When installing on glass, the back tray should be installed onto applied silver vinyl cut the same size as the tray.
Graphics
Applied vinyl text with tactile numeral: Grey: 3M 220-101 Red: to match Pantone 485 White: Silver: 3M 220-120
A graphic template and engineering drawing for this sign type is supplied on CD: 03 Interior Sign Templates > END_R1_Template 05 GA Drawings > 3487.09.pdf / 3487.11.pdf
Issue 6: 14.06.2010
5.11 END-R2: Endpoint A6 wallet Shown is an endpoint room sign generally to be used outside offices. This sign will need to incorporate a tactile room number. The clear wallet is sized to accommodate a 210mm x 75mm paper insert. This sign type also incorporates the APCO 'Notifier' product.
Construction
Wall mounted sign consisting of an MSS slat with a metallic silver finish and a clear acrylic wallet, mounted on a back tray sprayed white. Clear wallet to be backed-up with silver metallic vinyl. When installing on glass, the back tray should be installed onto applied silver vinyl cut the same size as the tray.
Graphics
Applied vinyl text with tactile numeral: Grey: 3M 220-101 Red: to match Pantone 485 White: Silver: 3M 220-120
A graphic template and engineering drawing for this sign type is supplied on CD: 03 Interior Sign Templates > END_R2 05 GA Drawings > 3487.10.pdf
A paper insert template is also supplied for use in the carrier, this is supplied on the CD in Word format: 03 Interior Sign Templates > END_R2_Paper_Template
G.00
16 30
212
3040
120 approxAcrylic wallet to take 210 x 75mmpaper insert
Text: Frutiger 65 Bold Typeset: 32pt
CL
Tactile numeraland background
G.00
Managerial Economics and Strategy Group
Mr James Henderson
Mr Alex Brown
Mr David Ross
Managerial Economics and Strategy Group
Mr James Henderson
Mr Alex Brown
Mr David Ross
Example
The paper template
Issue 6: 14.06.2010
5.12 END/R3: Endpoint room Shown is an endpoint room sign generally to be used for rooms with a permanent use. This sign will need to incorporate a tactile room number.
Construction
Wall mounted sign consisting of an aluminium panel with a metallic silver finish mounted on a back tray sprayed white. When installing on glass, the back tray should be installed onto applied silver vinyl cut the same size as the tray.
Graphics
Applied vinyl text with tactile numeral: Grey: 3M 220-101 Red: to match Pantone 485 White:
A graphic template and engineering drawing for this sign type is supplied on CD: 03 Interior Sign Templates > END_R3_Template 05 GA Drawings > 3487.12.pdf
Computer RoomLine two if Reqd
G.00
Restaurant
G.00
DA QA
16
16
16
30
210
30
15
15
18
10210Text:Frutiger 65 BoldTypeset: 60/72pt
Pictograms if required
CL
Tactile numeraland background
16
16
30
210
30
15
15
10 CL
Issue 6: 14.06.2010
5.13 END-R4: Toilet wall mounted Shown is a wall mounted endpoint toilet sign. This sign will need to incorporate a tactile pictogram plus Type 1 Braille.
Construction
Wall mounted sign consisting of an aluminium panel with a metallic silver finish mounted on a back tray sprayed white.
G.00
G.00 G.00 G.00 G.00
155
210
210
Typeset Frutiger 65 Bold 42pt
Tactile pictogram
Type 1 Braille
27
155
10
C L
Graphics
Applied vinyl text with tactile numeral: Grey: 3M 220-101 Red: to match Pantone 485 White
A graphic template and engineering drawing for this sign type is supplied on CD: 03 Interior Sign Templates > END_R4_Template 05 GA Drawings > 3487.12.pdf
Issue 6: 14.06.2010
5.14 END-R5: Toilet door mounted Shown is a door mounted endpoint toilet sign to be used when there is no appropriate wall space. This sign will need to incorporate a tactile pictogram plus Type 1 Braille.
Construction
Door mounted sign consisting of an aluminium panel with a metallic silver finish mounted directly to the surface.
Graphics
Applied vinyl text with tactile numeral: Grey: 3M 220-101 Red: to match Pantone 485 White:
A graphic template and engineering drawing for this sign type is supplied on CD: 03 Interior Sign Templates > END_R5_Template 05 GA Drawings > 3487.14.pdf
G.00
G.00 G.00 G.00 G.00
160
20
10
118
118
160
C L
Typeset Frutiger 65 Bold 36pt
Tactile pictogram
Type 1 Braille
Issue 6: 14.06.2010
5.15 END-R6: Endpoint projecting Shown is a projecting endpoint toilet sign to be used where appropriate.
Construction
Wall mounted projecting sign consisting of a folded aluminium panel with a metallic silver finish.
Graphics
Applied vinyl: Grey: 3M 220-101 Red: 3M 220-253 White: 3M 220-10
A graphic template and engineering drawing for this sign type is supplied on CD: 03 Interior Sign Templates > END_R6_Template 05 GA Drawings > 3487.15.pdf
190
250
250
30
190
C L
5mmreturn
Issue 6: 14.06.2010
5.16 END-R7: Endpoint residential Shown is a flat/room number plate and will be used for flats and room numbers within flats. They are tactile.
Construction
Door mounted aluminium plate with a metallic silver finish.
Flat
10 10.27
80
80
30
32
CL
Text: Frutiger 55 RomanTypeset: 54ptText: Frutiger 65 Bold Typeset: 100pt / 90pt
80
80
CL
CL
Text: Frutiger 65 Bold Typeset: 75pt
Graphics
Tactile to match Pantone Cool Gray 11
A graphic template for this sign type is supplied on CD: 03 Interior Sign Templates > END_R7_Template
Issue 6: 14.06.2010
5.17 FID-1/2: Facilities ID Shown are facilities signs. A FID-1 is a door mounted nameplate, while a FID-2 carries just the facilities number. FID 3
Construction
A FID-1 and FID-3 signs consist of a MSS system slat with a 2mm finishing strip, finished in metallic silver. The FID-2 is a 3mm thick aluminium plate finished in metallic silver.
FS7501Cleaners Cupboard
Kitchen
CCTV in OperationA CCTV system operates in this area for the pur-poses of crime prevention and public safety.
The system is operated by the London Schoolof Economics and Political Science.
For further information contact the security control room on 020 7955 6200
16 16 3030
212
30 104042 CL
154042 CL
Screenprinted numeralText: Frutiger 65 Bold Typeset: 21pt
Text: Frutiger 55 Roman Typeset: 42/48pt
Text: Frutiger 65 Bold Typeset: 32pt
Tactile when used for public access roomsText: Frutiger 65 Bold Typeset: 60pt
G.00
Academic building
12 36
150
122
36
27
8.5150
Text: Frutiger 55 Roman Typeset: 16/20pt
Text: Frutiger 65 Bold Typeset: 40pt
Residential building
Graphics
FID-1 Screenprinted numeral and background: to match Pantone 485C / white Applied vinyl text: Grey: 3M 220-101
FID-2/FID3
Screenprinted to match Pantone Cool Gray 11
A graphic template and engineering drawing for these sign types is supplied on CD: 03 Interior Sign Templates > FID_Template 05 GA Drawings > 3487.20.pdf / 3487.45.pdfFID-1
FID-3
FID-2
FS7501Cleaners Cupboard
Kitchen
CCTV in OperationA CCTV system operates in this area for the pur-poses of crime prevention and public safety.
The system is operated by the London Schoolof Economics and Political Science.
For further information contact the security control room on 020 7955 6200
16 16 3030
212
30 104042 CL
154042 CL
Screenprinted numeralText: Frutiger 65 Bold Typeset: 21pt
Text: Frutiger 55 Roman Typeset: 42/48pt
Text: Frutiger 65 Bold Typeset: 32pt
Tactile when used for public access roomsText: Frutiger 65 Bold Typeset: 60pt
G.00
Academic building
12 36
150
122
36
27
8.5150
Text: Frutiger 55 Roman Typeset: 16/20pt
Text: Frutiger 65 Bold Typeset: 40pt
Residential building
Issue 6: 14.06.2010
5.18 INS-A4/A3: A4/A3 instruction holder Shown is are the A4 and A3 paper holders to carry instructions for room and AV use. The paper holder is a standard product in the MSS range.
Construction
Wall mounted sign consisting of an MSS 'Frameless' A4 paper carrier mounted on a back tray sprayed white.
An engineering drawing for this sign type is supplied on CD: 05 GA Drawings > 3487.18.pdf (A4) 05 GA Drawings > 3487.21.pdf (A3)
212 approx
303 approxA4 MSS ‘Frameless’clear acrylic wallet
422 approx
A3 MSS ‘Frameless’clear acrylic wallet
INS-A4 INS-A3
Issue 6: 14.06.2010
5.19 DP-1/2/3/4: Donor plaques
Lecture TheatreG.00Teaching RoomG.00
Anthony Paduano & Ruth Porat Room
The Aman Theatregifted by theAman Foundation
Ad magna corpercilla facil dolorper sim
quatie feum estrud dipsumsandre
dolorer sum iusci blam velit la corper ilismod
dolore tet, corerit at enit, sit lor ipis nonum
nim irit praesecte dolupta tumsandip eu faci
ea consequate delit, quipit do odit dolum-
san vendre tis num qui blam
Verdant Atriumgifted byVincent Cheng
The Sheikh Zayed Theatreis a gift of the Emirates Foundation
No matter how many buildings, foundations,
schools and hospitals we build, or how many
bridges we raise, all these are material entities.
The real spirit behind the progress is the human
spirit, the able men and women with their
intellect and capabilities.”
Sheikh Zayed bin Sultan Al Nahyan 1918 - 2004Founder of the United Arab Emirates
Sheikh Zayed was one of the wisest leaders of
his generation in the Arab world. On 2 December
1971, he unified the seven Emirates into a single
nation. Sheikh Zayed's vision was to use the
country's wealth to secure global standards of
economic prosperity and social stability for his
people and humanity.
”
161516
300
161516 16
300
161516 16
300
2220
90
2220
180
2220
360
20 25
375
25
25
20
500
25 25
Typeset space name Frutiger 65 Bold 54/72ptTypeset text Frutiger 45 Light 54/72ptTypeset sponsor Frutiger 55 Roman 54/72pt
Typeset space name Frutiger 65 Bold 54/72ptTypeset text Frutiger 45 Light 54/72ptTypeset sponsor Frutiger 55 Roman 54/72ptTypeset explanatory text Frutiger 55 30/45pt
25
25
Shown are the three versions of donor plaque: DP-1: Used for recognition of seminar rooms DP-2: Used for recognition of floors, lecture theatres etc DP-3: Used for recognition of larger spaces, art etc DP-4: Used for recognition of the main lecture theartre
The text shown below and on the template is for illustration purposes only.
Construction
Wall mounted sign consisting of a 6mm LG Hi-Macs Artic White 'acrylic stone' panel mounted on a back tray sprayed white. Red detail consists of 3mm ali plate
bonded to surface. When installing on glass, the back tray should be installed onto applied silver vinyl cut the same size as the tray.
Graphics
Text screenprinted to match Cool Gray 11 C Red detail sprayed RAL 3020
A graphic template and engineering drawing for this sign type is supplied on CD: 03 Interior Sign Templates > DP_Template 05 GA Drawings > 3487.26.pdf DP-1 > 3487.27.pdf DP-2
DP-1 DP-2
DP-3 and DP-4 on folowing page
Issue 6: 14.06.2010
Lecture TheatreG.00Teaching RoomG.00
Anthony Paduano & Ruth Porat Room
The Aman Theatregifted by theAman Foundation
Ad magna corpercilla facil dolorper sim
quatie feum estrud dipsumsandre
dolorer sum iusci blam velit la corper ilismod
dolore tet, corerit at enit, sit lor ipis nonum
nim irit praesecte dolupta tumsandip eu faci
ea consequate delit, quipit do odit dolum-
san vendre tis num qui blam
Verdant Atriumgifted byVincent Cheng
The Sheikh Zayed Theatreis a gift of the Emirates Foundation
No matter how many buildings, foundations,
schools and hospitals we build, or how many
bridges we raise, all these are material entities.
The real spirit behind the progress is the human
spirit, the able men and women with their
intellect and capabilities.”
Sheikh Zayed bin Sultan Al Nahyan 1918 - 2004Founder of the United Arab Emirates
Sheikh Zayed was one of the wisest leaders of
his generation in the Arab world. On 2 December
1971, he unified the seven Emirates into a single
nation. Sheikh Zayed's vision was to use the
country's wealth to secure global standards of
economic prosperity and social stability for his
people and humanity.
”
161516
300
161516 16
300
161516 16
300
2220
90
2220
180
2220
360
20 25
375
25
25
20
500
25 25
Typeset space name Frutiger 65 Bold 54/72ptTypeset text Frutiger 45 Light 54/72ptTypeset sponsor Frutiger 55 Roman 54/72pt
Typeset space name Frutiger 65 Bold 54/72ptTypeset text Frutiger 45 Light 54/72ptTypeset sponsor Frutiger 55 Roman 54/72ptTypeset explanatory text Frutiger 55 30/45pt
25
25
5.19 DP-3/4: Donor plaques Graphics
Text screenprinted to match Cool Gray 11 C Red detail sprayed RAL 3020
A graphic template and engineering drawing for this sign type is supplied on CD: 03 Interior Sign Templates > DP_Template 05 GA Drawings > 3487.28.pdf DP-3 > 3487.32.pdf DP-4
Issue 6: 14.06.2010
5.20 DB: Donor Board Shown is the donor board for the New Academic Building. The text shown below and on the template is for illustration purposes only.
Construction
Wall mounted sign consisting of a LG Hi-Macs Artic White 'acrylic stone' panel mounted on a back tray sprayed white. The red detail is a aluminium section sprayed red bondoed to the panel.
Graphics
Text screenprinted to match Cool Gray 11 C Red detail sprayed to match Pantone 485 C
A graphic template and engineering drawing for this sign type is supplied on CD: 03 Interior Sign Templates > DB_Template 05 GA Drawings > 3487.29.pdf
Arif and Fayeeza Naqvi
Vincent Cheng
Wolfson FoundationAnnual Fund
The
Lond
on S
choo
l of
Econ
omic
s an
d Po
litic
al S
cien
ce g
rate
fully
ack
now
ledg
es t
he s
uppo
rt o
f th
e ge
nero
us in
divi
dual
, cor
pora
te a
nd f
ound
atio
n do
nors
to
the
deve
lopm
ent
of t
he N
ew A
cade
mic
Bui
ldin
g
Sirivadhanabhaki Foundation
Samuel D Isaly
Mark E Denning
Garfield Weston Foundation
Dimitris Paraskevas
Radwans of Antioc
Sypros and Vassiliki Karnessis
Stelios Haji-Ioannou
The Estate of Audrey Lambert
David W Heleniak
M R Safin
The Joseph & Lena Randall Charitable Trustand David A Randall
Professor Saw Swee Hock
Julian and Susan Green
Friends and Family Programme
Richard Karl Goeltz
Malcolm Candlish
Anthony Paduano and Ruth Porat
Ashley and Elizabeth Mitchell
Naomi Hass Perlman
The Estate of Charlotte Blank
1 anonymous donor
Ralph Oppenheimer
David Brooks
Nigel P Williams
Hellenic LSE Alumni Association
Friends of LSE - Hong Kong
Markit Group Limited
Graham Shore
Virginia and LE Simmons
Derek Green and Pamela (Evison) Green
George Davidson
Arne Groes
Dr Jakob Horder
Paulo and Beatriz
Pessoa de Araujo
Swirski Family
Stiftung Stahlwerk Georgsmarienhuette
Guy Rigden
Christos Sclavounis
Persepolis Floor
Sam Ala
Alireza Arouzi
Michel and Nousheen Danechi
Mahmoud Faghihi
Hoveyda Family
Mahnaz Kamel
Ardavan Farhad Moshiri
Mansour and Fariba Namaki and Family
Ali and May Rashidian
Bagher Roohi and Dr Bejan Roohi
Reza Nader-Sepahi
Prince Abdol Hossein Mirza Farmanfarma
Massoumeh Tafreshi Farman-Farmaian
Dr Sabbar Farman-Farmaian
Zahra Jabbareh Farman-Farmaian
Sattareh Farman-Farmaian
Farough Farman-Farmaian
Aysheh (Homeyra) Farman-Farmaian
Dr Ghaffar Farman-Farmaian
Soraya Farman-Farmaian
Haroon Rashid Farman-Farmaian
Khorshid Farman-Farmaian
Ardavan and Massoumeh Farmanfarmaian
Malaysian donors
Dato Dr Munir A Majid
Normah and Azman Yahya
Dato Lee Hau Hian
Carmen Chua
LSE Alumni Association of Malaysia
Canadian donors
Name of donor
Name of donor
Name of donor
Name of donor
£1m
+£2
50k
- £9
99,9
99£1
00k
- £2
49,9
99£5
0k -
£99
,999
£25k
- £
49,9
99£1
0k -
£24
,499
Arif and Fayeeza Naqvi
Vincent Cheng
Wolfson FoundationAnnual Fund
The
Lond
on S
choo
l of
Econ
omic
s an
d Po
litic
al S
cien
ce g
rate
fully
ack
now
ledg
es t
he s
uppo
rt o
f th
e ge
nero
us in
divi
dual
, cor
pora
te a
nd f
ound
atio
n do
nors
to
the
deve
lopm
ent
of t
he N
ew A
cade
mic
Bui
ldin
g
Sirivadhanabhaki Foundation
Samuel D Isaly
Mark E Denning
Garfield Weston Foundation
Dimitris Paraskevas
Radwans of Antioc
Sypros and Vassiliki Karnessis
Stelios Haji-Ioannou
The Estate of Audrey Lambert
David W Heleniak
M R Safin
The Joseph & Lena Randall Charitable Trustand David A Randall
Professor Saw Swee Hock
Julian and Susan Green
Friends and Family Programme
George Davidson
Arne Groes
Dr Jakob Horder
Paulo and Beatriz
Pessoa de Araujo
£1m
+£2
50k
- £9
99,9
99£1
00k
- £2
49,9
99£5
0k -
£99
,999
£25k
- £
49,9
99£1
0k -
£24
,499
50 5018 25 50
550
95
40
40
2250
Typeset Frutiger 55 Roman 72/120
Typeset Frutiger 45 Light 48pt
Typeset Frutiger65 Bold 30pt
Typeset Frutiger 55 Roman 48/72
Typeset Frutiger 55 Roman 40/60
Issue 6: 14.06.2010
6.0 External sign system
The specification for the LSE external sign system can be found on the following pages, the graphic templates needed to create the artwork can be found in Folder 04. Detailed engineering drawings to manufacture the signage can be found in either Appendix ii or in folder '05 GA Drawings' on the accompanying CD.
Issue 6: 14.06.2010
GAW: Gateway NAV: Navigation point CAM: Campus map 600mm²
BID-2: Building IDwith campus map
BID-3: Building IDwith campus map
LOG-L/BID-1: LSE Building ID with logo plaque
Old Building - Main ReceptionLibrary
New Academic Building
Clement House Student Services
DIR: Directional signage
Lincoln’s InnFields
LOG-L: Logo plaque for secondary gateways
LOG-S: Logo 300mm sq
6.1 External sign family The final external sign family elements comprising of
Gateways carrying the LSE brand and creating a sense of arrival as well as defining School the boundary. Gateways can be defined using either GAW, LOG-A or LOG-S sign types
Navigation points placed at the entrances to the LSE campus give people a clear overview of the site, they also provide information about the surrounding area.
•
•
GAW: Gateway NAV: Navigation point CAM: Campus map BID-2 / BID-3: Building IDLOG-S: Logo gateway DIR: Directional
LOG-A: Logo gateway LOG-L-BID-1: building ID
Campus maps – There will be local site maps positioned outside main entrance points to buildings to support people as they navigate around the site.
Directional signs to support the maps and give reassurance to the user on their journey.
Building IDs are visible and legible to aid people’s orientation and identification of destinations.
•
•
•
Issue 6: 14.06.2010
6.2 GAW: Gateway Gateway structure for Houghton Street comprising of three cubes in various sizes suspended from wires. Each cube carries the LSE letters on one face only, positioned so the LSE brand can be viewed from all directions.
Construction
The cubes are constructed from 10mm thick red acrylic and internally illuminated by by LED strips. The LSE letters are laser-cut and infilled with 10mm white acrylic. The cubes are suspended from stainless steel catenary wires using Jakobs SWR quality fixings.
Height of cubesfrom ground TBC per location
750mm3 500mm3600mm3
Front Elevation
Graphics
Red: to match Pantone 485 C White
A graphic template and engineering drawing for this sign type is supplied on CD: 04 Exterior Sign Templates > GAW_Template 05 GA Drawings > 3487.34.pdf
Internally illuminated
Issue 6: 14.06.2010
6.3 LOG-L: Logo 600 x 600 Shown is the LSE logo plaque which can be used either as a stand alone sign helping to brand the School or in conjunction with built-up letters when used as a building identification sign.
Construction
Vitreous enamel panel siliconed into a 5mm thick shot-peened stainless steel frame.
600
600
584 805
Graphics
Vitreous enamel: Red: to match Pantone 485 C White
A graphic template and engineering drawing for this sign type is supplied on CD: 04 Exterior Sign Templates > Log_L_Template 05 GA Drawings > 3487.08.pdf
Issue 6: 14.06.2010
6.4 Log-S: Logo plaque 300 x 300
300
300
28440
5
Shown is the LSE logo plaque which can be used either as a stand alone sign helping to brand the School or in conjunction with built-up letters when used as a building identification sign.
Construction
Vitreous enamel panel siliconed into a 5mm thick shot-peened stainless steel frame.
Graphics
Vitreous enamel: Red: to match Pantone 485 C White
A graphic template and engineering drawing for this sign type is supplied on CD: 04 Exterior Sign Templates > Log_S_Template 05 GA Drawings > 3487.03.pdf / railing mounted variant 3487.42.pdf / 350mm variant 3487.39.pdf
Issue 6: 14.06.2010
6.5 GLS: Glass screen
New AcademicBuilding
3mm fret-cut powdercoated ali letters bonded to face of glass
3mm fret-cut powdercoated ali letters bonded to face of glass
Red/grey translucent vinylapplied to rear face
2357 2402
3600
600 140 approx
13698136
Graphics
Applied vinyl: Grey: Avery 5571 Red: Avery 5519 QM
Text White: RAL 9003
A graphic template for this sign type is supplied on CD: 04 Exterior Sign Templates > GLS_Template
Shown is the existing glass screen outside the Lincoln's Inn Fields Building, although a one-off, the general principles still apply. Graphics only are required, comprising of individual fret-cut letters to the face with the rear of the glass panels backed-up with translucent vinyl.
Construction
3mm thick aluminium powdercoated dark grey (Cool Gray 11) bonded directly to the glass.
Issue 6: 14.06.2010
6.6 BID-1: Built up letters
600
584 Min 200
360600 584
This sign type comprises of built-up letters used in conjunction with the LSE logo plaque LOG-L. Ideally the proportions shown below between the logo and letters is maintained, but because of the diverse range of buildings in the LSE this will have to be reviewed on a building by building basis. The building code plate is fixed at low level to the side of the entrance
Construction
The built-up letters are powdercoated 1mm stainless steel spaced of wall on locators.
Graphics
Letters: Ral 7024
A graphic template and engineering drawing for this sign type is supplied on CD: 04 Exterior Sign Templates > BID_1_Template 05 GA Drawings > 3487.04.pdf/ 3487.08.pdf
Issue 6: 14.06.2010
6.7 BID-2: Building ID with Campus map
Front ElevationPortrait Configuration
Front ElevationLandscape Configuration
300
300
ColumbiaHouse
ConnaughtHouse
Lakatos
LAK CON
316300
316
316
300
300
25
24
25
5
5
60
60
316300
316300
25 60
CL
2512
Typeset Frutiger 65 Bold 100/120pt
Typeset Frutiger 55 Bold 50pt
This sign type comprises of a building name plaque and a Campus map. The two plaques can be either aligned vertically or horizontally depending on space available and will have to be reviewed on a building by building basis.
Construction
Vitreous enamel panels siliconed into a 5mm thick shot-peened stainless steel frame. Maps are digitally printed and wrapped around aluminium panel with vitreous enamel maps to follow site development.
Graphics
Vitreous enamel: Grey: to match Pantone Cool Gray 11 C Red : to match Pantone 485 C White
A graphic template and engineering drawing for this sign type is supplied on CD: 04 Exterior Sign Templates > BID_2_Template 05 GA Drawings > 3487.37a.pdf / 3487.38a.pdf
Issue 6: 14.06.2010
6.8 BID-3: Building ID panel This sign type is a building name plaque for minor buildings with the option to also carry the address.
Construction
Vitreous enamel panels siliconed into a 5mm thick shot-peened stainless steel frame.
Graphics
Vitreous enamel: Grey: to match Pantone Cool Gray 11 C Red : to match Pantone 485 C White
A graphic template and engineering drawing for this sign type is supplied on CD: 04 Exterior Sign Templates > BID_3_Template 05 GA Drawings > 3487.01.pdf
Front ElevationPortrait Configuration
Front ElevationLandscape Configuration
300
300
ColumbiaHouse
High Holborn Residence
Lakatos
LAK 178 High Holborn WC1V 7AA
316300
316 300
25
24
25
60
60
316300
25 60
CL
2512
Typeset Frutiger 65 Bold 100/120pt
Optional address line Frutiger 55 Roman 40pt
Typeset Frutiger 65 Bold 100/120pt
Code Frutiger 55 Roman 50pt
Issue 6: 14.06.2010
6.9 NAV: Navigation point Navigation points placed at the entrances to the LSE campus to give people a clear overview of the site, they also provide information about the surrounding area (within walking distance) for those leaving the site.
Construction
Vitreous enamel panels clad onto a stainless steel frame. Map panel fixed directly to framework. Shot peened 316 grade stainless steel plinth.
Graphics
Vitreous enamel: Red: to match Pantone 485 C White Black
A graphic template and engineering drawing for this sign type is supplied on CD: 02 Mapping > Navigation_Map 04 Exterior Sign Templates > NAV_Template 05 GA Drawings > 3487.33c.pdf / P.1, 2 & 3
1000
800
300
74.1°
15.9°
100 150
ses of things’
ses of things’
1000
800
300
74.1°
15.9°
100 150
ses of things’
ses of things’
Issue 6: 14.06.2010
6.10 CAM: Campus map 600 x 600
600
600
584
584
This sign type is a 'stand-alone' version of the Campus map. Generally used in conjunction with BID-1 sign type on larger buildings.
Construction
Map will be digitally printed vinly wrapped around an aluminium panel to be replaced by vitreous enamel maps following site development. Maps siliconed into a 5mm thick shot-peened stainless steel frame.
Graphics
Digital print as per artwork supplied. Red: Pantone 485 C LSE building grey: Pantone Cool Gray 11 Shadow grey: Pantone Cool Gray 8 Other building grey: Pantone Cool Gray 6 Paved area grey: Pantone Cool Gray 3 Green: Pantone 577 C
A graphic template and engineering drawing for this sign type is supplied on CD: 02 Mapping > Campus_Map_600 05 GA Drawings > 3487.02a.pdf
Issue 6: 14.06.2010
6.11 DIR: Directional Shown is the directional sign, made up of separate fingers wall mounted, this flexible system allows for directions to be added or removed. Ideally there are three but no more than 4
Construction
Red / grey directional finger is vitreous enamel siliconed into a 5mm thick shot-peened stainless steel frame.
90
20
New Academic Building
Old Building
Clement House
Old Building - Main RecetptionLibrary
Lincoln’s Inn Fields Building Clement House
Student Services
1000mm max
20 54 42 20
42
85
Typeset text frutiger 55 Roman 170pt
50
50
Graphics
Vitreous enamel to match: Red: Pantone 485 C Grey: Pantone Cool Gray 11 C White
A graphic template for this sign type is supplied on CD: 04 Exterior Sign Templates > DIR_Template 05 GA Drawings > 3487.05a.pdf / railing mounted variant 3487.41.pdf
Issue 6: 14.06.2010
6.12 POB: Poster boards Fly posting boards for Houghton Street. This is a bespoke product with artwork specific to each panel and location.
Construction
Vitreous enamel panels 1300 x 1700 mm with 20mm returns, backed up with marine plywood and installed on to existing window grills.
1300
1700
Graphics
Vitreous enamel to match: Red: Pantone 485 C Background: Pantone Cool Grey 11 C Text: Pantone Cool Gray 8 C Image: Dark Grey Map detail: Black
An engineering drawing for this sign type is supplied on CD: 05 GA Drawings > 3487.31.pdf
Issue 6: 14.06.2010
6.13 FID-1T/P: Facilities The external facilities signs come either as a tray or a 3mm plate and are designed to carry either operational or statutory information.
Construction
Tray sign: stainless steel with 15mm returns Plate: 3mm stainless steel
CCTV in Operation Post RoomKings Chambers31 Portugal Street
LibraryLoading Bay10 Carey StreetOpening times: 08.00 – 16.00Library deliveries only
CCTV in Operation Post RoomKings Chambers31 Portugal Street
LibraryLoading Bay10 Carey StreetOpening times: 08.00 – 16.00Library deliveries only
Clements InnGate Opening TimesMon to Fri 06.00 – 22.00Sat / Sun 10.00 – 18.00Bank Holidays Closed
Please wait for gates to fully openbefore entering
Catering DeliveriesMon to Fri 07.30 – 12.30
All goods for Catering Services shouldbe delivered direct to Fifth Floor
St Philips& Health CentreAccessible Entrance
Open to staff, studentsand members ofthe public.
Entrance
Accessible LiftLift restricted to swipecard holders only
Do not use for goods
A CCTV system operates in this area for the purposes of crime prevention and public safety.
The system is operated by the London Schoolof Economics and Political Science.
For further information contact the security control room on 020 7955 6200
CCTV in OperationA CCTV system operates in this area for the purposes of crime prevention and public safety.
The system is operated by the London Schoolof Economics and Political Science.
For further information contact the security control room on 020 7955 6200
24
24
72
54
16
24 24
300
300
24 24
300
24 24
300
Logo / pictogram 72 x 72mmHeading: Frutiger 65 Bold 80/96ptMessage: Frutiger 65 Bold 32.5/40pt
Logo / pictogram 72 x 72mmHeading: Frutiger 65 Bold 80/96ptAddress: Frutiger 55 Roman 40/56pt
Logo / pictogram 72 x 72mmHeading: Frutiger 65 Bold 80/96ptAddress: Frutiger 55 Roman 40/56pt
C L
16
16
16
48
36
16 16
200
200
16 16
200
80 80
200
Logo / pictogram 48 x 48mmHeading: Frutiger 65 Bold 80/96ptMessage: Frutiger 65 Bold 30/40pt
Logo / pictogram 48 x 72mmHeading: Frutiger 55 Roman 60ptText: Frutiger 55 Roman 40/56pt
Logo / pictogram 48 x 48mmHeading: Frutiger 55 Roman 80/96pt
Graphics
Screenprinted black or to match Pantone Cool Gray 11 C Black
A graphic template for this sign type is supplied on CD: 04 Exterior Sign Templates > FID_TP_Template 05 GA Drawings > 3487.22a.pdf (T) / 3487.24a.pdf (P)
Issue 6: 14.06.2010
6.14 FID-2T/P: Facilities
CCTV in Operation Post RoomKings Chambers31 Portugal Street
LibraryLoading Bay10 Carey StreetOpening times: 08.00 – 16.00Library deliveries only
CCTV in Operation Post RoomKings Chambers31 Portugal Street
LibraryLoading Bay10 Carey StreetOpening times: 08.00 – 16.00Library deliveries only
Clements InnGate Opening TimesMon to Fri 06.00 – 22.00Sat / Sun 10.00 – 18.00Bank Holidays Closed
Please wait for gates to fully openbefore entering
Catering DeliveriesMon to Fri 07.30 – 12.30
All goods for Catering Services shouldbe delivered direct to Fifth Floor
St Philips& Health CentreAccessible Entrance
Open to staff, studentsand members ofthe public.
Entrance
Accessible LiftLift restricted to swipecard holders only
Do not use for goods
A CCTV system operates in this area for the purposes of crime prevention and public safety.
The system is operated by the London Schoolof Economics and Political Science.
For further information contact the security control room on 020 7955 6200
CCTV in OperationA CCTV system operates in this area for the purposes of crime prevention and public safety.
The system is operated by the London Schoolof Economics and Political Science.
For further information contact the security control room on 020 7955 6200
24
24
72
54
16
24 24
300
300
24 24
300
24 24
300
Logo / pictogram 72 x 72mmHeading: Frutiger 65 Bold 80/96ptMessage: Frutiger 65 Bold 32.5/40pt
Logo / pictogram 72 x 72mmHeading: Frutiger 65 Bold 80/96ptAddress: Frutiger 55 Roman 40/56pt
Logo / pictogram 72 x 72mmHeading: Frutiger 65 Bold 80/96ptAddress: Frutiger 55 Roman 40/56pt
C L
16
16
16
48
36
16 16
200
200
16 16
200
80 80
200
Logo / pictogram 48 x 48mmHeading: Frutiger 65 Bold 80/96ptMessage: Frutiger 65 Bold 30/40pt
Logo / pictogram 48 x 72mmHeading: Frutiger 55 Roman 60ptText: Frutiger 55 Roman 40/56pt
Logo / pictogram 48 x 48mmHeading: Frutiger 55 Roman 80/96pt
The external facilities signs come either as a tray or a 3mm plate and are designed to carry either operational or statutory information.
Construction
Tray sign: stainless steel with 15mm returns Plate: 3mm stainless steel
Graphics
Screenprinted black or to match Pantone Cool Gray 11 C
A graphic template for this sign type is supplied on CD: 04 Exterior Sign Templates > FID_TP_Template 05 GA Drawings > 3487.23a.pdf (T) / 3487.25a.pdf (P)
Issue 6: 14.06.2010
i Suppliers The LSE sign system uses standard products from the listed suppliers below:
Modular Sign System (MSS)
Alan Stevenson
Workshop 2 Limited Tilemans Lane Shipston on Stour Warwickshire CV36 4QZ
T: 020 7823 7120 www.wksp2.com
APCO Notifier
APCO United Kingdom LKH Estate, Tickhill Road Balby, Doncaster DN4 8QG
T: 01302 311121 www.apcosigns.co.uk
Statutory signs
Stocksigns Ltd Ormside Way Redhill Surrey RH 2LG
T: 01737 764 764 www.stocksigns.co.uk
Acrylic material
Rosskopf & Partner AG
Nick Welsh - UK Partner The Corner 45 Shay Lane Hale Barns Altrincham Cheshire WA15 8PA
Tel: 07855 502885 www.rosskopf-partner.com
II GA drawings
52
6
5
4
3
2
1
GFEDCBAA3
rev
1 of 1
© design copyright
www.fwdesign.com
+44 (0)20 7928 0412
fwdesign limitedthe old schoolexton streetlondon se1 8ue
third angle projection
notes
date
drawn byJH
16.06.08
clientLSE
revision date description
No part of this drawing and thedesign contained herein may bereproduced without the writtenconsent of fwdesign limited.
1:4
scale (at A3)
approved by
drawing nameplaque - BID3 (single panel sign)
all dimensions in millimetres
316
55
25
35
52
40
316
3
25
5
manufacturer to detail fixings tobe used to hold sign to buildingfacade.
installation to take place with ajig to locate fixing points onbuilding facade.
security fixings to always beplaced on the underside of theframework.
site survey to be carried out bymanufacturer prior toproduction.
AB
SIGN TO BE SPACED 5mm FROMBUILDING SURFACE WITH BLACKFOAMEX PANEL
VITREOUS ENAMEL PANEL WITH 25mmRETURNS
ARTWORK TO BE SUPPLIED SEPARATELY
LOCATION PINS ON UPPER FACE OFFRAME WORK TO HOLD VITREOUSENAMEL PANEL
Ø 1
0
2 x ALLEN KEY SECURITY FIXINGS TOLOWER FACES OF SIGN FRAME TO HOLDVITREOUS ENAMEL PANEL
5mm THICK SHOT-PEENED 316STAINLESS STEEL FRAME, FULLYWELDED AND DRESSED BACKCONSTRUCTION
BLACK SILICON BEAD, 3mm THICK
CLEARANCE HOLES ON REAR FACE OFFRAMEWORK ALLOWS POSITION OFSIGN TO BE ADJUSTED CORRECTLY
PENNY WASHERS TO BE USED TOALLOW SCREWHEADS TO HOLDFRAMEWORK
drawing number
sheet
LSE.3487.01
II GA drawings
No part of this drawing and thedesign contained herein may bereproduced without the writtenconsent of fwdesign limited.
a
ve panel change to aliwith digital print03.02.10a
MAPALUMINIUM PANEL WITHDIGITALLY PRINTED VINYLPRINT WRAPPED AROUNDPANEL
600mm wall mouned maptilted variant
ab
FRAME5mm THICK SHOT-PEENED316 GRADE STAINLESSSTEEL
LOCATION PIN FOR VEPANEL
SILICON, 3mm THICK
SIGN TO BE SPACED 5mmFROM BUILDINGSURFACE WITH BACKINGPANEL
SIGN TO BEMANUFACTURED WITH ATRAY IN TRAYCONSTRUCTION WITHSPLIT BATONS
2 ALLEN KEY FIXINGS TOUPPER FACE OF SIGN TOHOLD VITREOUS ENAMELPANEL IN PLACE ON TOPSURFACE
manufacturer to detail splitbatons and fixings to be used tohold sign to building facade.
security fixings to be used tohold sign to in place when heldon batons.
site survey to be carried out bymanufacturer prior toproduction.
drawing name
approved by
scale (at A3)1:4
descriptiondaterevision
LSE
client
16.06.08
jh
drawn by
date
notes
third angle projection
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
www.fwdesign.com
© design copyright
1 of 1
rev
A3
1
all dimensions in millimetres
3
5
6
5
4
3
2
GFEDCBA
600
25
5
600
59
30
75
46
75
54
sheet
LSE.3487.02
drawing number
II GA drawings
site survey to be carried out bymanufacturer prior toproduction.
manufacturer to specify fixings
ab
approved by
VITREOUS ENAMEL PANEL WITH 25mmRETURNS
ARTWORK TO BE SUPPLIED SEPARATELY
SILICON, 3mm THICK
FRAME5mm THICK SHOT-PEENED 316 GRADESTAINLESS STEEL
SIGN TO BE SPACED 5mm FROM BUILDINGSURFACE WITH BLACK FOAMEX PANEL
plaque - 300mm square variant
drawing name
6
5
4
3
2
1
GFEDCBAA3
No part of this drawing and thedesign contained herein may bereproduced without the writtenconsent of fwdesign limited.
rev
1 of 1
© design copyright
www.fwdesign.com
+44 (0)20 7928 0412
fwdesign limitedthe old schoolexton streetlondon se1 8ue
third angle projection
all dimensions in millimetres
notes
date
drawn byjh
1:4
scale (at A3)12.06.08
clientLSE
revision date description
45
40
30
0 S
Q
2 ALLEN KEY FIXINGS TO UPPER FACE OFSIGN TO HOLD VITREOUS ENAMEL PANELIN PLACE ON TOP SURFACE
284 SQ
LOCATION PIN FOR VE PANEL
drawing numberLSE.3487.03
sheet
II GA drawings
DEPTH OF LETTERSTHE DEPTH OF A BUILT-UP LETTER CAN BECALCULATED AS 10% OF THE HEIGHT OFA CAPITAL X WRITTEN IN THE SPECIFIEDHEIGHT
FOR EXAMPLE:
CAPITAL X HEIGHT (a) = 450mmDEPTH OF LETTER (b) = 45mm
SPACING AWAY FROM WALLTHIS IS TYPICALLY 1/3 OF THE DEPTH OFTHE LETTER. IF THIS VALUE IS BELOW10mm, THEN A SPACING OF 10mmSHOULD BE SPECIFIED.
FOR EXAMPLE:
DEPTH OF LETTER (b) = 45mmSPACING AWAY FROM WALL (c) = 15mm
c
b
a
AB
descriptiondaterevision
LSE
client
12.06.08
scale (at A3)1:1
6
approved byJH
drawn by
date
notes
all dimensions in millimetres
third angle projection
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
www.fwdesign.com
© design copyright
1 of 1sheet
rev
No part of this drawing and thedesign contained herein may bereproduced without the writtenconsent of fwdesign limited.
LSE.3487.04
drawing number
A3 A B C D E F G
1
2
3
4
5
built-up letters - guideline
drawing name
GUIDELINE DRAWING ONLY
A
A
SECTION A-A
LETTER1mm THICK POWDERCOATED 316GRADE STAINLESS STEEL SHEET
FIXINGSMANUFACTURER TO SPECIFY FIXINGSFOLLOWING SITE SURVEY
Height of letters to be scaledaccording to location, indicativeheight shown for reference
Appointed manufacturer tocarry out a site survey beforemanufacture
Manufacturer to specify fixings
II GA drawings
Height of letters to be scaledaccording to location, indicativeheight shown for reference
Appointed manufacturer tocarry out a site survey beforemanufacture
15
20
1
160
94
A
A
SECTION A-A
drawing namebuilt-up letters - 160mm tall
5
4
3
2
1
GFEDCBAA3
drawing numberLSE.3487.04a
No part of this drawing and thedesign contained herein may bereproduced without the writtenconsent of fwdesign limited.
rev
sheet 1 of 1
© design copyright
www.fwdesign.com
+44 (0)20 7928 0412
fwdesign limitedthe old schoolexton streetlondon se1 8ue
third angle projection
all dimensions in millimetres
notes
date
drawn byjh
approved by
6
1:1
scale (at A3)12.06.08
clientLSE
revision date description
FIXINGSBUILT-UP LETTER FIXING USINGWOODSCREW AND WALL PLUG
LETTER1mm THICK POWDERCOATED316 GRADE STAINLESS STEELSHEET
II GA drawings
LETTER1mm THICKPOWDERCOATED 316GRADE STAINLESS STEELSHEET
Height of letters to be scaledaccording to location, indicativeheight shown for reference
Appointed manufacturer tocarry out a site survey beforemanufacture
FIXINGSBUILT-UP LETTER FIXINGUSING WOODSCREW ANDWALL PLUG
SECTION A-A
descriptiondaterevision
LSE
client
12.06.08
scale (at A3)1:1
6
approved byjh
drawn by
date
notes
all dimensions in millimetres
third angle projection
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
www.fwdesign.com
© design copyright
1 of 1sheet
rev
No part of this drawing and thedesign contained herein may bereproduced without the writtenconsent of fwdesign limited.
LSE.3487.04b
drawing number
A3 A B C D E F G
1
2
3
4
5
built-up letters - 135mm tall
drawing name
A
A
135
7920
15
1
II GA drawings
LETTER1mm THICK POWDERCOATEDSTAINLESS STEEL
20
1
Height of letters to be scaledaccording to location, indicativeheight shown for reference
Appointed manufacturer tocarry out a site survey beforemanufacture
drawing namebuilt-up letters - 140mm tall
5
4
3
2
1
GFEDCBAA3
drawing numberLSE.3487.04c
No part of this drawing and thedesign contained herein may bereproduced without the writtenconsent of fwdesign limited.
rev
sheet 1 of 1
© design copyright
www.fwdesign.com
+44 (0)20 7928 0412
fwdesign limitedthe old schoolexton streetlondon se1 8ue
third angle projection
all dimensions in millimetres
notes
date
drawn byjh
approved by
6
1:1
scale (at A3)18.07.08
clientLSE
revision date description
10
FIXINGSBUILT-UP LETTER FIXING USINGWOODSCREW AND WALL PLUG
SECTION A-A
140
115
A
A
II GA drawings
length of each sign (maximum1000mm) to be determined bygraphic guideline.
a site survey should be carriedout by the appointedmanufacturer to determine theangle of each corner where thesigns are to be placed.
no sharp edges all edges to bedress before peening
ab
directional signs
drawing numberLSE.3487.05
sheet
revision date description
No part of this drawing and thedesign contained herein may bereproduced without the writtenconsent of fwdesign limited.
1:8
scale (at A3)
approved by
drawing name
A3
rev
1 of 1
© design copyright
www.fwdesign.com
+44 (0)20 7928 0412
fwdesign limitedthe old schoolexton streetlondon se1 8ue
third angle projection
notes
date
drawn byjh
16.06.08
clientLSE
1
all dimensions in millimetres
SINGLE FINGER
DOUBLE FINGER
VITREOUS ENAMEL PANEL
SILICONE JOINT
SCALE 1:2
SECTION A-ASIGN FIXED TO WALL WITHSCREW FIXINGS
A
A
A
A
A
19.05.09A frame detail amended
5mm THICK SHOT-PEENED 316GRADE STAINLESS STEEL
20
1010
5
28
10
15
5
5
6
4
3
2
GFEDCBA
1010
10
10
10
1
28 5
16
3
3
5 (SPACER)
5
85
R 5
II GA drawings
VITREOUS ENAMEL PANEL WITH25mm RETURNS
ARTWORK TO BE SUPPLIEDSEPARATELY
descriptiondaterevision
LSE
client
12.06.08
scale (at A3)1:4
approved byjh
drawn by
date
notes
all dimensions in millimetres
third angle projection
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
www.fwdesign.com
© design copyright
1 of 1
rev
No part of this drawing and thedesign contained herein may bereproduced without the writtenconsent of fwdesign limited.
A3 A B C D E F G
1
2
3
4
5
6
drawing name
plaque - 600mm square variant
ab
60
0 S
Q
80
85
584 SQ
LOCATION PIN FOR VE PANEL
SILICON, 3mm THICK
FRAME5mm THICK SHOT-PEENED 316GRADE STAINLESS STEEL
2 ALLEN KEY FIXINGS TO UPPERFACE OF SIGN TO HOLD VITREOUSENAMEL PANEL IN PLACE ON TOPSURFACE
BUILDING FACADE
SIGN TO BE SPACED 5mm FROMBUILDING SURFACE WITH BACKINGPANEL
SIGN TO BE MANUFACTURED WITHA TRAY IN TRAY CONSTRUCTIONWITH SPLIT BATONS
site survey to be carried out bymanufacturer prior toproduction.
manufacturer to specify fixings
sheet
LSE.3487.08
drawing number
A
A
TRAYS1.5mm THICK POWDERCOATEDALUMINIUM, BONDED TOFRONT ASSEMBLY
20
MSS 15mm HEADER SLAT(POWDERCOATED)
SECURITY FIXINGSTHROUGH TRAY INTO BATON
MSS 2mm TOP SLAT
MSS 60mm HEADER SLAT(POWDERCOATED)
1 of 1sheet
No part of this drawing and the designcontained herein may be reproducedwithout the written consent offwdesign limited.
approved by
scale (at A3)1:2
drawing name
6
5
4
3
2
1
GFEDCBAA3
drawing numberLSE.3487.09
rev
© design copyright
www.fwdesign.com
+44 (0)20 7928 0412
fwdesign limitedthe old schoolexton streetlondon se1 8ue
third angle projection
notes
date
drawn byjh
12.06.08
clientLSE
revision date description
SILVER VINYL TO REAR FACE OFPAPER HOLDER
MSS CLEAR ACRYLIC PAPERHOLDER, FOLDED TO HOLD ANA4 SHEET WITH 2 x THUMBHOLES
2T
O F
IT A
46
0
15
6
END-R1 large (room sign)
all dimensions in millimetres
Refer to sign manual for graphicdetail, including tactile elements
14
SECTION A-A
REAR TRAY FIXED TO WALLWITH SCREW FIXINGS
260
300
II GA drawings
II GA drawings
REAR TRAY FIXED TO WALLWITH SCREW FIXINGS
A
A
40
TO
FIT
PA
PE
R 7
5 x
21
0m
m
212
172
6
14
32 30
TRAYS1.5mm THICK POWDERCOATEDALUMINIUM, BONDED TOFRONT ASSEMBLY
SECTION A-A
SECURITY FIXINGTHROUGH TRAY INTO BATON
MSS CLEAR ACRYLIC PAPERHOLDER, FOLDED TO HOLD ANA4 SHEET WITH 2 x FINGERHOLES
SILVER VINYL TO REAR FACE OFPAPER HOLDER
descriptiondaterevision
LSE
client
12.06.08
jh
drawn by
date
notes
third angle projection
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
www.fwdesign.com
© design copyright
revLSE.3487.10
drawing number
A3 A B C D E F G
1
2
3
4
5
6
drawing name
APCO PAPER HOLDER, FIXED TOWALL
MSS 40mm HEADER SLAT(POWDERCOATED)
1:2
scale (at A3)
approved by
1 of 1sheet
No part of this drawing and the designcontained herein may be reproducedwithout the written consent of fwdesignlimited.
END-R2 (room sign )
all dimensions in millimetres
Refer to sign manual for graphicdetail, including tactile elements
TAB, INTO WHICH FRONT TRAYENGAGES
II GA drawings
A
A
300
260
SECTION A-A
REAR TRAY FIXED TO WALLWITH SCREW FIXINGS
2T
O F
IT A
4
15
40
6
20
14
Refer to sign manual for graphicdetail, including tactile elements
all dimensions in millimetres
SECURITY FIXINGTHROUGH TRAY INTO BATON
MSS 2mm TOP SLAT
END-R1 small (room sign)
No part of this drawing and the designcontained herein may be reproducedwithout the written consent offwdesign limited.
1 of 1sheet
approved by
scale (at A3)1:2
MSS 40mm HEADER SLAT(POWDERCOATED)
MSS 15mm HEADER SLAT(POWDERCOATED)
BATONBONDED TO 40mm HEADERSLAT
SILVER VINYL TO REAR FACE OFPAPER HOLDER
MSS CLEAR ACRYLIC PAPERHOLDER, FOLDED TO HOLD ANA4 SHEET WITH 2 x FINGERHOLES
descriptiondaterevision
LSE
client
12.06.08
jh
drawn by
date
notes
third angle projection
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
www.fwdesign.com
© design copyright
revLSE.3487.11
drawing number
A3 A B C D E F G
1
2
3
4
5
6
drawing name
TRAYS1.5mm THICK POWDERCOATEDALUMINIUM, BONDED TOFRONT ASSEMBLY
II GA drawings
210
3
A
A
210
No part of this drawing and the designcontained herein may be reproducedwithout the written consent offwdesign limited.
sheet 1 of 1
approved by
scale (at A3)
descriptiondaterevision
LSE
client
12.06.08 1:2
jh
drawn by
date
notes
third angle projection
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
www.fwdesign.com
© design copyright
revLSE.3487.12
drawing number
A3 A B C D E F G
1
2
3
4
5
6
drawing nameEND-R3,END-R4 (room signs),LID (level ID sign)
all dimensions in millimetres
Refer to sign manual for graphicdetail, including tactile elements
172
14
20
BATONBONDED TO 40mm HEADERSLAT
SECTION A-A
REAR TRAY FIXED TO WALLWITH SCREW FIXINGS
SPLIT BATONSBONDED TO TRAY AND REARFACE OF PAPER HOLDER
SECURITY FIXINGTHROUGH TRAY INTO BATON
PANEL3mm THICK POWDERCOATEDALUMINIUM
TRAY1.5mm THICK POWDERCOATEDALUMINIUM
II GA drawings
all dimensions in millimetres
fret-cut letters - varying heights
SPACER10mm DIAMETER PLASTIC TUBE
LETTER3mm THICK POWDERCOATEDALUMINIUM
WALL SURFACE
100
10
3 99
FIXINGSM8 STUD FIXING INTO WALLSURFACE
LSE
revision date description
drawing numberLSE.3487.13
date
drawn byjh
20.06.08
A3
rev
© design copyright
www.fwdesign.com
+44 (0)20 7928 0412
fwdesign limitedthe old schoolexton streetlondon se1 8ue
third angle projection
notes
client
drawing name
6
5
4
3
2
1
GFEDCBA
20
sheet 1 of 1
No part of this drawing and the designcontained herein may be reproducedwithout the written consent offwdesign limited.
1:1
scale (at A3)
approved by
Height of letters to be scaledaccording to location, indicativeheight shown for reference
Refer to sign manual for cap Xheight
Appointed manufacturer tocarry out a site survey beforemanufacture
II GA drawings
END-R5 (room sign)
PANEL3mm THICK POWDERCOATEDALUMINIUM
TO BE BONDED TO WALLSURFACE
3
160
160
drawing name
6
5
4
3
2
1
GFEDCBAA3
drawing numberLSE.3487.14
rev
© design copyright
www.fwdesign.com
+44 (0)20 7928 0412
fwdesign limitedthe old schoolexton streetlondon se1 8ue
third angle projection
notes
date
drawn byjh
1:212.06.08
clientLSE
revision date description
scale (at A3)
approved by
1 of 1sheet
No part of this drawing and the designcontained herein may be reproducedwithout the written consent offwdesign limited.
Refer to sign manual for graphicdetail, including tactile elements
all dimensions in millimetres
II GA drawings
255
PANEL5mm THICK POWDERCOATEDALUMINIUM
FIXINGSTHROUGH COUNTERSUNKHOLES ON RETURN
COVER STRIP1mm THICK WHITE PLASTICSTRIP BONDED TO RETURNCONCEALS WALL FIXINGS
5R 1
0
25
Ø 4
12.5
20
30
25
0 END-R6 (projecting room sign)
No part of this drawing and the designcontained herein may be reproducedwithout the written consent offwdesign limited.
sheet 1 of 1
approved by
scale (at A3)
descriptiondaterevision
LSE
client
12.06.08 1:2
jh
drawn by
date
notes
third angle projection
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
www.fwdesign.com
© design copyright
revLSE.3487.15
drawing number
A3 A B C D E F G
1
2
3
4
5
6
drawing name
all dimensions in millimetres
II GA drawings
all dimensions in millimetres
drawing name
6
5
4
3
2
1
GFEDCBAA3
drawing numberLSE.3487.16
rev
© design copyright
www.fwdesign.com
+44 (0)20 7928 0412
fwdesign limitedthe old schoolexton streetlondon se1 8ue
third angle projection
notes
date
drawn byjh
1:812.06.08
clientLSE
revision date description
scale (at A3)
approved by
1 of 1sheet
No part of this drawing and the designcontained herein may be reproducedwithout the written consent offwdesign limited.
Sign to increase in height in200mm increments toaccomodate graphics whennecessary
SDIR/LDIR (lift/stair directory)
SECURITY FIXINGTHROUGH TRAY INTO BATON
PANEL3mm THICK POWDERCOATEDALUMINIUM
1200
3
BATONBONDED TO 40mm HEADERSLAT
A
500
20
B
B
A
TRAY1.5mm THICK POWDERCOATEDALUMINIUM
SPLIT BATONSBONDED TO TRAY AND REARFACE OF PAPER HOLDER
14
SECTION A-A
SCALE 1:2
REAR TRAY FIXED TO WALLWITH SCREW FIXINGS
SECTION B-B
SCALE 1:2
II GA drawings
all dimensions in millimetres
Sign to increase in height in100mm increments toaccomodate graphics whennecessary
Refer to sign manual for graphicdetail, including tactile elements
drawing name
6
5
4
3
2
1
GFEDCBAA3
drawing numberLSE.3487.17
rev
© design copyright
www.fwdesign.com
+44 (0)20 7928 0412
fwdesign limitedthe old schoolexton streetlondon se1 8ue
third angle projection
notes
date
drawn byjh
1:212.06.08
clientLSE
revision date description
scale (at A3)
approved by
1 of 1sheet
No part of this drawing and the designcontained herein may be reproducedwithout the written consent offwdesign limited.
DIR (directional sign)
14
260
A
A
20
300
300
3
SECURITY FIXINGTHROUGH TRAY INTO BATON
TRAY1.5mm THICK POWDERCOATEDALUMINIUM
SPLIT BATONSBONDED TO TRAY AND REARFACE OF PAPER HOLDER
BATONBONDED TO 40mm HEADERSLAT
PANEL3mm THICK POWDERCOATEDALUMINIUM
REAR TRAY FIXED TO WALLWITH SCREW FIXINGS
SECTION A-A
II GA drawings
Refer to sign manual for graphicdetail, including tactile elements
all dimensions in millimetres
TRAY1.5mm THICK POWDERCOATEDALUMINIUM
SPLIT BATONSBONDED TO TRAY AND REARFACE OF PAPER HOLDER
BATONBONDED TO 40mm HEADERSLAT
SECURITY FIXINGTHROUGH TRAY INTO BATON
Instructional sign - A4 portrait
No part of this drawing and the designcontained herein may be reproducedwithout the written consent offwdesign limited.
sheet 1 of 1
approved by
scale (at A3)
descriptiondaterevision
LSE
client
12.06.08 1:2
jh
drawn by
date
notes
third angle projection
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
www.fwdesign.com
© design copyright
revLSE.3487.18
drawing number
A3 A B C D E F G
1
2
3
4
5
6
drawing name
PAPER HOLDERMSS FRAMELESS SYSTEM - TOHOLD A4 SHEET
REAR TRAY FIXED TO WALLWITH SCREW FIXINGS
14
174
214
A
A
7
20
303
SECTION A-A
II GA drawings
1200
4505
450
STANDMSS ADJUSTABLE STAND
PANEL5mm THICK POWDERCOATEDALUMINIUM
drawing name
6
5
4
3
2
1
GFEDCBAA3
drawing numberLSE.3487.19
rev
© design copyright
www.fwdesign.com
+44 (0)20 7928 0412
fwdesign limitedthe old schoolexton streetlondon se1 8ue
third angle projection
notes
date
drawn byjh
1:812.06.08
clientLSE
revision date description
scale (at A3)
approved by
1 of 1sheet
No part of this drawing and the designcontained herein may be reproducedwithout the written consent offwdesign limited.
all dimensions in millimetres
SDIR (free standing stair directory)
II GA drawings
45
45
1 x PANEL3mm THICK SPRAY PAINTEDALUMINIUM
TO BE BONDED TO WALLSURFACE
3
fwdesign limitedthe old schoolexton streetlondon se1 8ue
www.fwdesign.com
© design copyright
revLSE.3487.20
drawing number
drawing name
No part of this drawing and the designcontained herein may be reproducedwithout the written consent offwdesign limited.
sheet 1 of 1
approved by
scale (at A3)
descriptiondaterevision
LSE
client
04.07.08 1:1
jh
drawn by
date
1
2
3
4
5
6
+44 (0)20 7928 0412
FID 1(facility sign),FID 2 (facility sign)
all dimensions in millimetres
Refer to sign manual for graphicdetail, including tactile elements
E
notes
third angle projectionA3 A B C D F G
FID 1
FID 2
6 2
MMS 2mm TOP SLAT
MMS 40mmSLAT
TO BE BONDED TOWALL SURFACE
21240
II GA drawings
Refer to sign manual for graphicdetail, including tactile elements
all dimensions in millimetres
Instructional sign - A3 landscape
No part of this drawing and the designcontained herein may be reproducedwithout the written consent offwdesign limited.
sheet 1 of 1
approved by
scale (at A3)
descriptiondaterevision
LSE
client
12.06.08 1:2
jh
drawn by
date
notes
third angle projection
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
www.fwdesign.com
© design copyright
revLSE.3487.21
drawing number
A3 A B C D E F G
1
2
3
4
5
6
drawing name
7
20
14
A
A
303
424
384
PAPER HOLDERMSS FRAMELESSSYSTEM - TOHOLD A4 SHEET
SECURITY FIXINGTHROUGH TRAYINTO BATON
SPLIT BATONSBONDED TOTRAY AND REARFACE OF PAPERHOLDER
TRAY1.5mm THICKPOWDERCOATEDALUMINIUM
BATONBONDED TO 40mmHEADER SLAT
REAR TRAY FIXEDTO WALL WITHSCREW FIXINGS
SECTION A-A
II GA drawings
A 08.01.10 Material change
A1 of 1
ab
TRAY IN TRAY1.5mm THICK BRUSHED 316GRADE STAINLESS STEEL
COUNTERSUNK SECURITYFIXINGSTHROUGH OUTER TRAY INTOINNER TRAY
REAR TRAY FIXED TO WALLWITH SCREW FIXINGS
PANEL5mm THICK FOAMEX PANEL
300
15
all dimensions in millimetres
drawing name
6
5
4
3
2
1
GFEDCBAA3
drawing numberLSE.3487.22
rev
© design copyright
www.fwdesign.com
+44 (0)20 7928 0412
fwdesign limitedthe old schoolexton streetlondon se1 8ue
third angle projection
notes
date
drawn byjh
1:212.06.08
clientLSE
revision date description
scale (at A3)
approved by
sheet
No part of this drawing and the designcontained herein may be reproducedwithout the written consent offwdesign limited.
FID -T1 (wall-mounted tray)
A
A
300
300
SECTION A-A
Refer to sign manual for graphicdetail, including tactile element.
site survey to be carried out bymanufacturer prior toproduction.
II GA drawings
ab
Refer to sign manual for graphicdetail, including tactile elements
site survey to be carried out bymanufacturer prior toproduction.
manufacturer to specify fixings
TRAY IN TRAY1.5mm THICK BRUSHED 316GRADE STAINLESS STEEL
A 08.01.10 Material change
A
FID -T2 (wall-mounted tray)
No part of this drawing and the designcontained herein may be reproducedwithout the written consent offwdesign limited.
sheet 1 of 1
approved by
scale (at A3)
descriptiondaterevision
LSE
client
12.06.08 1:2
jh
drawn by
date
notes
third angle projection
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
www.fwdesign.com
© design copyright
revLSE.3487.23
drawing number
A3 A B C D E F G
1
2
3
4
5
6
drawing name
all dimensions in millimetres
COUNTERSUNK SECURITYFIXINGSTHROUGH OUTER TRAY INTOINNER TRAY
PANEL5mm THICK FOAMEX PANEL
SECTION A-A
15
A
A
200
200
200
II GA drawings
A MATERIAL CHANGE &PINS ADDED
08.01.10
PANEL3mm THICK BRUSHED 316GRADE STAINLESS STEEL
TO BE BONDED TO WALLSURFACE WITH X2SUPPORTING PINS
A
ab
Refer to sign manual for graphicdetail, including tactile element.
Site survey to be carried out bymanufacturer prior toproduction.
300
3 300
FID-P1 (wall-mounted plaque)
drawing name
6
5
4
3
2
1
GFEDCBAA3
drawing numberLSE.3487.24
rev
© design copyright
www.fwdesign.com
+44 (0)20 7928 0412
fwdesign limitedthe old schoolexton streetlondon se1 8ue
third angle projection
notes
date
drawn byjh
1:212.06.08
clientLSE
revision date description
scale (at A3)
approved by
1 of 1sheet
No part of this drawing and the designcontained herein may be reproducedwithout the written consent offwdesign limited.
all dimensions in millimetres
II GA drawings
A
ab
MATERIAL CHANGE &PINS ADDEDA 08.01.10
PANEL3mm THICK BRUSHED 316GRADE STAINLESS STEEL
TO BE BONDED TO WALLSURFACE WITH X2SUPPORTING PINS
Refer to sign manual for graphicdetail, including tactile elements
Site survey to be carried out bymanufacturer prior toproduction
FID-P2 (wall-mounted plaque)
drawing name
6
5
4
3
2
1
GFEDCBAA3
drawing numberLSE.3487.25
rev
© design copyright
www.fwdesign.com
+44 (0)20 7928 0412
fwdesign limitedthe old schoolexton streetlondon se1 8ue
third angle projection
notes
date
drawn byjh
1:212.06.08
clientLSE
revision date description
scale (at A3)
approved by
1 of 1sheet
No part of this drawing and the designcontained herein may be reproducedwithout the written consent offwdesign limited.
all dimensions in millimetres
200
3 200
II GA drawings
14 3
descriptiondaterevision
LSE
client
17.07.08
jh
drawn by
date
notes
third angle projection
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
www.fwdesign.com
© design copyright
revLSE.3487.26
drawing number
A3 A B C D E F G
1
2
3
4
5
6
drawing name
1:2
scale (at A3)
approved by
1 of 1sheet
No part of this drawing and the designcontained herein may be reproducedwithout the written consent of fwdesignlimited.
Donor Plaque (small variant)
all dimensions in millimetres
Refer to sign manual for graphicdetail
SECURITY FIXINGTHROUGH TRAY INTO BATON
TAB, INTO WHICH FRONT TRAYENGAGES
REAR TRAY FIXED TO WALLWITH SCREW FIXINGS
SECTION A-A
TRAYS1.5mm THICK POWDERCOATEDALUMINIUM, BONDED TOFRONT ASSEMBLY
POWDERCOATED ALUMINIUMSTRIP BONDED TO SURFACE
LG HI MACS NATURAL ACRYLICSTONE ARCTIC WHITE 6mmTHICK SHEET
20
6
68
90
16
300
A
A
15
20 260
II GA drawings
14
descriptiondaterevision
LSE
client
17.07.08
jh
drawn by
date
notes
third angle projection
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
www.fwdesign.com
© design copyright
revLSE.3487.27
drawing number
A3 A B C D E F G
1
2
3
4
5
6
drawing name
1:2
scale (at A3)
approved by
1 of 1sheet
No part of this drawing and the designcontained herein may be reproducedwithout the written consent of fwdesignlimited.
Donor Plaque (medium variant)
all dimensions in millimetres
Refer to sign manual for graphicdetail
SECURITY FIXINGTHROUGH TRAY INTO BATON
LG HI MACS NATURAL ACRYLICSTONE ARCTIC WHITE 6mmTHICK SHEET
260
6
3
16
180
158
A
POWDERCOATED ALUMINIUMSTRIP BONDED TO SURFACE
300
A
15
20
20
TRAYS1.5mm THICK POWDERCOATEDALUMINIUM, BONDED TOFRONT ASSEMBLY
SECTION A-A
REAR TRAY FIXED TO WALLWITH SCREW FIXINGS
TAB, INTO WHICH FRONT TRAYENGAGES
II GA drawings
SECTION A-A
300
260
338
360
6
5
20
16
4
A
20
15
14
3
2
1
AA3
3
CB
A
D FE
9
Donor Plaque (large variant)
No part of this drawing and the designcontained herein may be reproducedwithout the written consent of fwdesignlimited.
sheet
drawing name
drawing numberLSE.3487.28
© design copyright
www.fwdesign.com
+44 (0)20 7928 0412
fwdesign limitedthe old schoolexton streetlondon se1 8ue
date
drawn byjh
17.07.08
clientLSE
TAB, INTO WHICH FRONT TRAYENGAGES
TRAYS1.5mm THICK POWDERCOATEDALUMINIUM, BONDED TOFRONT ASSEMBLY
REAR TRAY FIXED TO WALLWITH SCREW FIXINGSPOWDERCOATED ALUMINIUMSTRIP BONDED TO SURFACE
1 of 1
rev
approved by
scale (at A3)1:2
Refer to sign manual for graphicdetail
notes
revision
G
LG HI MACS NATURAL ACRYLICSTONE ARCTIC WHITE 9mmTHICK SHEET
SECURITY FIXINGTHROUGH TRAY INTO BATON
date description
all dimensions in millimetres
third angle projection
II GA drawings
15
third angle projection
all dimensions in millimetres
descriptiondate
G
1:10
scale (at A3)
approved by
rev
1 of 1
E FDB CA3 A
1
2
3
4
5
6
revision
notesRefer to sign manual for graphicdetail
LSE
client
17.07.08
jh
drawn by
date
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
www.fwdesign.com
© design copyright
LSE.3487.29
drawing number
drawing name
sheet
No part of this drawing and the designcontained herein may be reproducedwithout the written consent of fwdesignlimited.
Donor Board
NOT TO SCALE
SECTION A-A
SECURITY FIXINGSTHROUGH TRAY INTO BATON
REAR TRAY FIXED TO WALLWITH SCREW FIXINGS
LG HI MACS NATURAL ACRYLICSTONE ARCTIC WHITE BUILT-UPPANEL TO 25mm DEEP - FIXEDTO TRAY
550
50
95
18
25
2250
BUILT-UP POWDERCOATEDALUMINIUM STRIP, BONDED TOPANEL SURFACE
50
20 A
A
II GA drawings
REAR TRAY FIXED TO WALL WITHSCREW FIXINGS
POWDERCOATED ALUMINIUMSTRIP BONDED TO SURFACE
SECURITY FIXINGTHROUGH TRAY INTO BATON
TRAYS1.5mm THICK POWDERCOATEDALUMINIUM, BONDED TO FRONTASSEMBLY
SECTION A-A
TAB, INTO WHICH FRONT TRAYENGAGES
500
478
A
375
20
20
9
20314
335
25
LSE
client
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
www.fwdesign.com
© design copyright
LSE.3487.32
drawing number
drawing name
sheet
No part of this drawing and the designcontained herein may be reproducedwithout the written consent of fwdesignlimited.
Donor Plaque (largest variant)
5
6
4
2
3
A3 A
1
B C D
description
E F
rev
1 of 1
1:4
scale (at A3)
approved by
G third angle projection
all dimensions in millimetres
notesRefer to sign manual for graphicdetail
A
LG HI MACS NATURAL ACRYLICSTONE ARCTIC WHITE 9mm THICKSHEET
revision date
date12.08.08
jh
drawn by
II GA drawings
PLINTH
MAP PANELVitreous enamel panel660 x 660 x 25mm
UPPER CUBE
3mm thick silicon seal
700
700
A
B
A
B
600
6
30
0 C
rit
ica
l D
ime
ns
ion
24
8
5
4
98
100 Critical Dimension
Side Elevation
2
3
BA DCA3
1
Plan Elevation
700
client
PLINTH316 Grade stainless steel plinth withshot peen finish applied. Laser cutapature with two colour vitreousenamel branding badge set in withgrey silicon seal to edges
550
75
30
10
0
100 75
rev
C
16.02.09
JH
date
drawn by
Ground Level
sheet
Front Elevation
1:10
Navigation Point
drawing name
scale (at A3)
approved by
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
© design copyright
www.fwdesign.com
No part of this drawing and thedesign contained herein may bereproduced without the writtenconsent of fwdesign limited.
drawing numberLSE.3487.33
1 of 3
LSE
AB
UPPER CUBEVitreous Enamel external facesconstructed from individual faces with45 degree reurns on the vertical edgesand 90 degree double returns on thetop and bottom
4 external faces of cube to havescreen-printed graphics applied
E GF
Manufacturer to detail fixingmethod along folded edges.
Manufacturer to specify internalframework detail andfoundation.
B
C
daterevision
A
notes
third angle projection
all dimensions in millimetres
plinth modified
description
dimensions added24.02.09
25.02.09
15.01.10
framework amended
II GA drawings
660
4
5
6
17
3
Section B-B (not to scale)
700
B
70
0
2
3
A C D
1
A3
Section A-A
1.6mm thick vitreous enamel sheet with 45° returnson the vertical edges and 90° double return on thetop and bottom edges. Panels fixed by key holesand fixing under bottom edge to framework ifrequired clientDetail B(not to scale)
MAP PANELVitreous enamelpanel 660 x 660 x17mm
date
LSE
fwdesign limitedthe old schoolexton streetlondon se1 8ue
approved by
scale (at A3)
drawing name
1:10
JH
16.02.09
© design copyright
www.fwdesign.com
No part of this drawing and thedesign contained herein may bereproduced without the writtenconsent of fwdesign limited.
2 of 3C
rev
sheet
LSE.3487.33
drawing number
AB
+44 (0)20 7928 0412
drawn by
20mm thick backingboard machined onedges to 17mm thickto fit around frame
50 x 50mm 304 gradestainless steel boxsection internalframework
Neoprene strip and silion joint between vitreousenamel panels
Navigation Point - Panel Detail
GFE
all dimensions in millimetres
third angle projection
notes
C 19.01.10
25.02.09B
framework and plinthamended
framework amended
revision date description
24.02.09 dimensions addedA
50 x 50mm 304 grade stainless steel frame
20mm thick backing board routed out on edges tofit frame
Manufacturer to specify internalframework detail, base plate,foundations and fixing methods.
Structural calculations to beconducted by manufacturer.
II GA drawings
28
2
660
660
5
6
4
Side Elevation
790
2
3
A B
74
0
C D
Plan Elevation
A3
1
660
C
ABJH
560
43
0
10
0
50
16
4
50
10
02
0
30
30
50
50 x 50mm 304 gradestainless steel frame
No part of this drawing and thedesign contained herein may bereproduced without the writtenconsent of fwdesign limited.
drawing numberLSE.3487.33
3 of 3
© design copyright
www.fwdesign.com
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
drawing name
client
1:10
scale (at A3)
approved by
description
LSE
Navigation Point - Frame
Front Elevation
Ground Level
sheet
rev
15.01.10
date
drawn by
daterevision
Two part frame boltedtogether with tolleranceholes to allow foradjustent
E F G
Manufacturer to detail fixingmethod along folded edges.
Manufacturer to specify internalframework detail andfoundation.
Structural calculations to beconducted by manufacturer.
notes
third angle projection
all dimensions in millimetres
II GA drawings
appointed manufacturer tocarry out all structuralcalculations
A
product to be scaled to fit othervarients:500x500 mm sq600x600 mm sq
Steel cable and fixings as standardto 'Jakob SWR'quality and sizings.To be specified by manufacturer
Stainless steel frame layer toreduce tension on screwfixings through to acrylic
LED strips
LSE logo laser cut andinfilled with whiteacrylic sectionLogo artwork to besupplied on file byfwdesign seperatelyLogo to one face onlyon each cube
10mm thick redacrylic tonearestmatch to PMS485/RAL3020
3mm screw fixing
centre line
centre line
A A
SECTION AA
11
12
13
7
8
10
9
B B
6
5
4
DCB
3
2
A
Stainless steel top plate withwelded fixings and centrecable
Stainless steel fixing as standard to'Jakob SWR' fixings quality.To be specified by manufactuer
E F G
drawing name
client
revision description
1
date
FJ
LSE.3487.34
21.01.09
approved by
scale (at A1)
No part of this drawing and thedesign contained herein may bereproduced without the writtenconsent of fwdesign limited.
sheet
rev
© design copyright
1 of 1
drawing number
www.fwdesign.com
LSE
external suspended cube
1:5
AB
drawn by
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
21.01.09
date
all dimensions in millimetres
manufacturer to detail fixings,cableing and LED structure toJakobs SWR quality finish.
L NM
notes
third angle projectionP QO
appointed manufacturer tocarry out a site survey beforemanufacture and health andsafety checks for suspendedobjects.
A1
1 SECTION BB
IH KJ
II GA drawings
316
all dimensions in millimetres
drawing name
approved by
scale (at A3)1:4
No part of this drawing and thedesign contained herein may bereproduced without the writtenconsent of fwdesign limited.
descriptiondaterevision
LSE
client
23.06.09
JH
drawn by
date
notes
third angle projection
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
www.fwdesign.com
© design copyright
1 of 1
rev
A3 A B C D E F G
1
2
3
4
5
6
plaque - BID2 (landscape variant)
AB
manufacturer to detail fixings tobe used to hold sign to buildingfacade.
installation to take place with ajig to locate fixing points onbuilding facade.
security fixings to always beplaced on the underside of theframework.
site survey to be carried out bymanufacturer prior toproduction.
36
316
25 (SPACE BETWEEN FRAMES)
Ø 1
0
25
40
52
3
SIGN TO BE SPACED 5mm FROMBUILDING SURFACE WITH BLACKFOAMEX PANEL
5mm THICK SHOT-PEENED 316STAINLESS STEEL FRAME, FULLYWELDED AND DRESSED BACKCONSTRUCTION
5
5
2 x ALLEN KEY SECURITY FIXINGS TOLOWER FACES OF SIGN FRAME TO HOLDVITREOUS ENAMEL PANEL
BLACK SILICON BEAD, 3mm THICK
CLEARANCE HOLES ON REAR FACE OFFRAMEWORK ALLOWS POSITION OFSIGN TO BE ADJUSTED CORRECTLY
PENNY WASHERS TO BE USED TOALLOW SCREWHEADS TO HOLDFRAMEWORK
52
LOCATION PINS ON UPPER FACE OFFRAME WORK TO HOLD MAP PANEL
MAPALUMINIUM PANEL WITH 25mmRETURNS, DIGITALLY PRINTED VINLYMAP TO BE WRAPPED AROUND PANEL
BUILDING NAMEVITREOUS ENAMEL PANELWITH 25mm RETURNS
a 03.01.10 map panel changed to aliwith wrapped digital print
ALSE.3487.37
sheet
drawing number
II GA drawings
CLEARANCE HOLES ON REAR FACE OFFRAMEWORK ALLOWS POSITION OFSIGN TO BE ADJUSTED CORRECTLY
PENNY WASHERS TO BE USED TOALLOW SCREWHEADS TO HOLDFRAMEWORK
MAPALUMINIUM PANEL WITH 25mmRETURNS, DIGITALLY PRINTED VINLYMAP TO BE WRAPPED AROUND PANEL
BUILDING NAMEVITREOUS ENAMEL PANELWITH 25mm RETURNS
A
map panel changed to aliwith wrapped digital print
03.01.10a
all dimensions in millimetres
drawing name
approved by
scale (at A3)1:4
No part of this drawing and thedesign contained herein may bereproduced without the writtenconsent of fwdesign limited.
descriptiondaterevision
LSE
client
23.06.09
JH
drawn by
date
notes
third angle projection
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
www.fwdesign.com
© design copyright
1 of 1
rev
A3 A B C D E F G
1
2
3
4
5
6
plaque - BID2 (portrait variant)
AB
manufacturer to detail fixings tobe used to hold sign to buildingfacade.
installation to take place with ajig to locate fixing points onbuilding facade.
security fixings to always beplaced on the underside of theframework.
site survey to be carried out bymanufacturer prior toproduction.
Ø 1
0
25
(S
PA
CE
BE
TW
EE
N F
RA
ME
S)
341
316
52
25
5
36
316
52
5mm THICK SHOT-PEENED 316STAINLESS STEEL FRAME, FULLYWELDED AND DRESSED BACKCONSTRUCTION
5
BLACK SILICON BEAD, 3mm THICK
SIGN TO BE SPACED 5mm FROMBUILDING SURFACE WITH BLACKFOAMEX PANEL
LOCATION PINS ON UPPER FACE OFFRAME WORK TO HOLD VITREOUSENAMEL PANEL
2 x ALLEN KEY SECURITY FIXINGS TOLOWER FACES OF SIGN FRAME TO HOLDVITREOUS ENAMEL PANEL LSE.3487.38
sheet
drawing number
II GA drawings
site survey to be carried out bymanufacturer prior toproduction.
manufacturer to specify fixingmethods
VITREOUS ENAMEL PANEL WITH 25mmRETURNS
AB
plaque - 350mm square variant
drawing name
6
5
4
3
2
1
GFEDCBAA3
No part of this drawing and thedesign contained herein may bereproduced without the writtenconsent of fwdesign limited.
rev
1 of 1
© design copyright
www.fwdesign.com
+44 (0)20 7928 0412
fwdesign limitedthe old schoolexton streetlondon se1 8ue
third angle projection
all dimensions in millimetres
notes
date
drawn byJH
approved by
1:4
scale (at A3)12.06.08
clientLSE
revision date description
SILICON, 3mm THICK
FRAME5mm THICK SHOT-PEENED 316 GRADESTAINLESS STEEL
SIGN TO BE SPACED 5mm FROM BUILDINGSURFACE WITH BLACK FOAMEX PANEL
334 SQ
LOCATION PIN FOR VE PANEL
35
0 S
Q
55
50
2 ALLEN KEY FIXINGS TO UPPER FACE OFSIGN TO HOLD VITREOUS ENAMEL PANELIN PLACE ON TOP SURFACE
drawing numberLSE.3487.39
sheet
II GA drawings
VITREOUS ENAMEL PANEL WITH 25mmRETURNS
site survey to be carried out bymanufacturer prior toproduction.
manufactuer to specify fixingmethods
2 ALLEN KEY FIXINGS TO UPPER FACE OFSIGN TO HOLD VITREOUS ENAMEL PANELIN PLACE ON TOP SURFACE
LOCATION PIN FOR VE PANEL
31
6 S
Q
300 SQ
SIGN TO BE SPACED 5mm FROM BUILDINGSURFACE WITH BLACK FOAMEX PANEL
FRAME5mm THICK SHOT-PEENED 316 GRADESTAINLESS STEEL
SILICON, 3mm THICK
25
30
art plaque
drawing name
6
5
4
3
2
1
GFEDCBAA3
No part of this drawing and thedesign contained herein may bereproduced without the writtenconsent of fwdesign limited.
rev
1 of 1
© design copyright
www.fwdesign.com
+44 (0)20 7928 0412
fwdesign limitedthe old schoolexton streetlondon se1 8ue
third angle projection
all dimensions in millimetres
notes
date
drawn byJH
approved by
1:4
scale (at A3)30.07.09
clientLSE
revision date description
AB
drawing numberLSE.3487.40
sheet
II GA drawings
LSE.3487.415
3
A B C D E F G
2
3
4
6
5
5mm THICK SHOT-PEENED 316GRADE STAINLESS STEEL
A
SECTION A-A
SCALE 1:2
SILICONE JOINT
VITREOUS ENAMEL PANEL
1
LSE
client
07.01.10
ab
drawn by
date
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
www.fwdesign.com
© design copyright
1 of 1
rev
drawing name
approved by
scale (at A3)1:8
No part of this drawing and thedesign contained herein may bereproduced without the writtenconsent of fwdesign limited.
descriptiondaterevision
sheet
drawing number
directional signs -railing mounted
all dimensions in millimetres
notes
third angle projectionA3
length of each sign (maximum1000mm) to be determined bygraphic guideline.
a site survey should be carriedout by the appointedmanufacturer to determine theangle of each corner where thesigns are to be installed andspecify appropreate fixings
no sharp edges all edges to bedress before peening
85
20
5
5A
A
SINGLE FINGER
28
RAILING
80
5
1016
SECURITY FIXINGS CLAMPS SIGNTO RAILINGS WITH 304 STAINLESSSTEEL BAR WITH PPC BLACKFINISH, THREADED FIXINGATTACHES TO INTERNAL WELDNUTS
cpd
101
85
II GA drawings
site survey to be carried out bymanufacturer prior toproduction.
manufacturer to specify fixings
RAILINGS
RAILINGS
5mm THICK MOUNTING PLACE WITHBLACK FINISH, SECUITY FIXINGS TOSCREW INTO TREADED HOLES IN BACKPANEL OF SIGN
40
284 SQ
LOCATION PIN FOR VE PANEL
30
0 S
Q
2 ALLEN KEY FIXINGS TO UPPER FACE OFSIGN TO HOLD VITREOUS ENAMEL PANELIN PLACE ON TOP SURFACE
VITREOUS ENAMEL PANEL WITH 25mmRETURNS
ARTWORK TO BE SUPPLIED SEPARATELY
SILICON, 3mm THICK
FRAME5mm THICK SHOT-PEENED 316 GRADESTAINLESS STEEL
SIGN TO BE SPACED 5mm FROM BUILDINGSURFACE WITH BLACK FOAMEX PANEL
plaque - 300mm square variantrailing mounted
descriptiondaterevision
LSE
client
12.06.08
scale (at A3)1:4
jh
drawn by
date
notes
all dimensions in millimetres
third angle projection
fwdesign limitedthe old schoolexton streetlondon se1 8ue
+44 (0)20 7928 0412
www.fwdesign.com
© design copyright
1 of 1
rev
No part of this drawing and thedesign contained herein may bereproduced without the writtenconsent of fwdesign limited.
A3 A B C D E F G
1
2
3
4
5
6
drawing name
approved byab
sheet
LSE.3487.42
drawing number
II GA drawings
6 2
150
150
cpd
FID 3(internal CCTV sign)
all dimensions inmillimetres
Refer t o sign manual forgraphic detail, includingtactile elements
MMS 150mmSLAT
TO BE BONDED TOWALL SURFACE
MMS 2 m m TOP SLAT
GFDCBAA3third angle projection
notes
E
+44 (0)20 7928 0412
6
5
4
3
2
1
date
drawn b yab
1:114.06.10
clientLSE
revision date description
scale (at A3)
approved b y
1 o f 1sheet
N o part o f this drawing and thedesign contained herein m a y bereproduced without the writtenconsent o f fwdesign limited.
drawing name
drawing numberLSE.3487.45
rev
© design copyright
www.fwdesign.com
fwdesign limitedthe old schoolexton streetlondon se1 8ue
Issue 6: 14.06.2010
III DDA report Below is the DDA report is produced by June Bretherton and David Whitehead of JBC – London 26 June 2008
This is a report on the accessibility of suggested signage being prepared by FW Design for LSE.
It is based upon the examples we have been shown for:
A. Internal sign system B. Navigation point maps C. Campus maps
A. Internal Sign System
i Overall size/positioning – The signs are a good size to carry the required information and are to be positioned at an acceptable height.
ii Siting – Given the constraints of the building (e.g. glass walls), it would appear that the signs are being placed as well as can be expected. Directional signage from the well-appointed lifts is as good as it can be in difficult circumstances, but the signs themselves are good.
iii Door Sign 1 Utility areas Signage to toilets and similar facilities are accessible and contain all necessary raised information plus Braille.
2 Doors signs (a) Tonal Contrast – Good, being a combination of red, silver and dark grey. These tones and colours lend contrast, definition and do not cause glare or halo affect.
(b) the ‘room identification number square’ (e.g. G.12)
is well placed at the top left-hand side and, being raised out of the plate and holding further raised letters and numbers lends well to those looking at and/or needing to feel the information. The use of bright red on this box with white figuring is very good.
(c) The title of the rooms stands out well tonally (grey on silver) and is tactilely acceptable. Letters are of a good size and distanced well. We were pleased to note that they used upper and lower case.
(d) Changing Information Panel – Would appear to be sufficiently large to take reasonably sized printed information, which we hope will be provided in large clear font and tonal contrasted paper/lettering.
B. Navigation Point Maps
i These, we understand, are to be placed strategically on walkways at a height suitable both to pedestrians and wheelchair users. We suggest that they are tilted at an angle of around forty degrees to lend maximum access.
ii Overall size – sufficient to allow for useful/necessary information and adequate font size.
iii Tonal contrast – clear and non-glare. We were pleased to see that black/white combinations are not used.
(a) Roads are clearly shown in white and allow for dark grey (cool grey 11) labelling to be seen easily.
(b) Lettering – Font and size are good.
(c) Identification of pavements and walkways in mid-grey is very useful.
(d) Reverse contrast of dark grey buildings with white lettering is equally clear.
(e) Use of colour to depict other areas is very good (i.e. green for ‘Field area’.
(f) These maps are extremely useful as they position the user both in terms of the Campus and the area around, clearly identifying arrival and departure options.
(g) Red Border – denotes position of map and lends corporate unity.
C. Campus Maps
We understand that these 300mm square maps are to be wall mounted on the buildings and repeat the Campus information from the navigation maps. They are a very sensible idea. The contrasts, size, fonts, etc. are all the same as those for the Navigation Point maps and are as accessible as possible. It is important that they are sited or finished in an anti-glare manner.
D. Recommendation
We would recommend that ‘books of raised maps’ to be produced and be provided to those needing them. These would then be portable and able to be studied at the convenience of the user in friendly environments. Creating such maps is not a direct replication of the original map and should be created by a specialist. We can recommend several experts in this field.
JBC - London 77 Greenleaf Rd. London E17 6QW
T: +44 (0) 20 8521 4325 F: +44 (0) 20 8503 7945 E: [email protected] W: www.jbc-london.com
Issue 6: 14.06.2010
IV Statutory signage All safety/statutory signs relating to equipment or behaviour e.g. electrical riser, no smoking etc. must comply with BS 5499 standards.
Signs should only be installed after consultation with the LSE Fire/Health and Safety Officer.
CCTV Signs
The public needs to be aware that they are entering an area that is being monitored by CCTV surveillance equipment. Signs should be placed so that they are clearly visible and legible. The size of the sign will vary according to the circumstances of its location.
Signs need to contain the identity of whoever is responsible for the scheme, its purpose and their contact details. There are only a few exceptional circumstances where signs can not be used, such as investigating specific criminal activity. The exact wording on LSE CCTV signs should be checked with the relevant authority before manufacture.
Positioning signs
Signs must be sufficiently large and clear, durable, secured, and properly maintained to ensure they remain visible.
Install signs at a suitable height and in the line of sight, either at the entry to an area of general hazard, or in the immediate vicinity of a specific hazard.
Avoid placing too many signs too close together as this can cause confusion or reduce their effectiveness. The number of signs used in any one location should be kept to a minimum.
Safety signs should not be located in areas where colour contrast is poor.
If circumstances change and a hazard no longer exists, any redundant signs are to be removed.
All safety signs must be properly maintained (e.g. cleaned, tested for audibility or visibility), so as to perform their intended function.
When combining signs a gap of 10mm should be left between each plaque. Door signs should be positioned in the following order of priority, top to bottom: • Fire safety • Prohibition • Warning • Mandatory • Information
•
•
•
•
•
•
Fire Prohibit Prohibit
WarningMandatory
Info
FS7501 FS7501 FS7501
FS7501 Facilities Name FS7501 Facilities Name FS7501 Facilities Name
Fire Prohibit
Mandatory
Info
Mandatory
Info
FS7501FS7501 FS7501
FS7501 Facilities Name FS7501 Facilities Name
50mm
1600mm
10mm
CL CL CL
50mm
1600mm
10mm10mm
CL CL CL
Align with architectureHigh enough so not to be obscured but still legible and in sight linefrom a distance
Align 1600mm highor with door detailing.Use side windows if possible or fit to porch wall to avoid too many signs on glass doors.
Issue 6: 14.06.2010
IV Statutory signage
Fire Prohibit Prohibit
WarningMandatory
Info
FS7501 FS7501 FS7501
FS7501 Facilities Name FS7501 Facilities Name FS7501 Facilities Name
Fire Prohibit
Mandatory
Info
Mandatory
Info
FS7501FS7501 FS7501
FS7501 Facilities Name FS7501 Facilities Name
50mm
1600mm
10mm
CL CL CL
50mm
1600mm
10mm10mm
CL CL CL
Align with architectureHigh enough so not to be obscured but still legible and in sight linefrom a distance
Align 1600mm highor with door detailing.Use side windows if possible or fit to porch wall to avoid too many signs on glass doors.
Purchasing signs
When purchasing signs from a manufacturer it should be ascertained, where applicable, that the product conforms to the Health & Safety Signs Regulations 1996 and/or BS5378 & BS5499. The signs should be enamelled aluminium unless they are to be applied to glass when a self adhesive printed vinyl may be used.
See 'Appendix I' for suppliers.
Further information can be found at www.hse.gov.uk/pubns/indg184.htm where there is an HSE free leaflet summarizing the legal position.