shredding head · 2020. 7. 24. · introduces a new shredding concept — meet the...
TRANSCRIPT
The Global Leader in Food Cutting Technology
®
SHREDDING HEAD
U.S.D.A., DAIRY DIVISION ACCEPTED.
®
[email protected] | www.urschel.com
Urschel has long offered targeted cutting
solutions to the global community of leading food
processors — adapting to the requirements of
individual applications and continuing to grow in
the company's engineering and manufacturing
expertise through each endeavor. As a result of this
adaptive cutting technology approach, Urschel
introduces a new shredding concept — meet the
MicroAdjustable® Shredding Head (SH-14).
U.S.D.A., Dairy Division accepted, the 14-station
cutting head offers nearly double the capacity
of an 8-shoe head. The new design incorporates
ideal, carefully crafted spacing of cutting stations
to maximize shred engagement.
In addition to the new SH-14 head, the standard,
fully-adjustable, U.S.D.A., Dairy Division accepted,
8-shoe head is also still available.
Adaptive Cutting
Technology Delivers
ADVANCED
Shredding Solutions
Expedited assembly and disassembly plus limited tools and minimal parts allow for complete sanitation of every part.
STREAMLINED, OPTIMIZED CLEANING
Impeller Options
For cheese applications, rely on the stainless steel, U.S.D.A., Dairy Division accepted impeller (left). For other applications, explore the newly patented grooved/angled impeller (right) designed to facilitate proper product orientation.
ADVANCED
Shredding Solutions
Engraved numeric values are easy to define, and simple to set.
Adjustable gate flexes as top/ bottom adjustable cams are turned to provide micro-adjustability of shred thickness.
MICROADJUSTABLE DESIGN SHREDDING ADVANTAGES
• Delivers maximum cutting action with 14 cutting stations versus the fully-adjustable, standard head with 8 cutting stations — almost doubling the capacity.
• Quick-set shred thickness with a simple turn of labeled adjustment cams. Numerical values engraved on the top ring easily identify shred thickness.
• Angle wrench and block assist with knife changeovers and facilitate expedient assembly/disassembly for complete sanitation.
• Maintains strict tolerances throughout production runs with the ability to easily micro-adjust shreds using top/bottom adjustable cams by flexing the adjustable gate while the knife holder/knife edge remain in a fixed position.
• Fits in place of standard double-ring, double-adjustment heads using self-locking lower ring. No need for any special adapter.
• Lightweight 35 lb (16 kg) with built-in handles to ease lifting.
• Shred range: The new SH-14 offers simple, micro-adjustability as outlined on back cover.
FEATURES
Self-locking lower ring mounts to standard Model CCX-D cutting head support.
OVAL SHREDS & REDUCED OVAL (CRESCENT) SHREDS
.300 Oval Shred: Oval-shaped cross section approximately .125" (3.2 mm) thick by .300" (7.6 mm) wide. Crescent Shred: Crescent-shaped cross section.
www.urschel.com | [email protected]
§The following Urschel patents are protected under law: Grooved Impeller US 7,658,133 and Locking Cutting Head Support US 7,270,040.® Urschel, The Global Leader in Food Cutting Technology, and MicroAdjustable are registered trademarks of Urschel Laboratories, Inc. U.S.A. | L3538 (s.s. L3517) JULY 2020
YOU ARE INVITED TO TEST CUT YOUR PRODUCTUrschel has a complete network of test cutting facilities and experienced service and sales representatives around the world ready to work with you on any size reduction application. Contact your local Urschel representative to schedule a comprehensive, no-obligation test cut today at www.urschel.com.
The MicroAdjustable SH-14 shred head is available for use on the Model CCX-D in
plants operating under U.S.D.A., Dairy Division guidelines. This head may also be utilized
on other CC series models for shredding of products, including vegetables.
The Urschel §Model CC series uniformly slices, strip cuts, shreds and granulates
a wide variety of food products at high production capabilities with
excellent results. Explore the CC series at www.urschel.com.
URSCHEL® MODEL CCVERSATILE SLICER, SHREDDER, & GRANULATOR
TYPES OF SHREDS
FULL SHREDS & REDUCED V SHREDS
Full Shred: Diamond-shaped cross section available in three thicknesses: .070, .097, or 125" (1.8, 2.5, or 3.2 mm). Reduced V Shred: “V”-shaped cross section.
UNIQUE SLICES, STRIPS, & GRATING OPTIONS
.020 – .050" Oval0 – .030" Oval
.300" (7.6 mm)
.300" (7.6 mm)
.300" (7.6 mm)
.125" (3.2 mm) Thickness
.212" V Cut Knife
-.025 (-.635 mm)
-.020 (-.508 mm)
-.030 (-.762 mm)
-.040 (-1.02 mm)
-.050 (-1.27 mm)
.070" (1.8 mm) Thickness
.125" V Cut Knife
.125" (3.2 mm)
.125" (3.2 mm)
Discover even more cutting options for the versatile Model CC series on the Urschel website.
.097" (2.5 mm) Thickness
.170" V Cut Knife
.170" (4.3 mm)
.170" (4.3 mm)
.212" (5.4 mm)
.212" (5.4 mm)
.070" (1.8 mm)
-.005"(-.127 mm)
-.010"(-.254 mm)
-.020" (-.508 mm)
-.030" (-.762 mm)
-.005"(-.127 mm)
-.010"(-.254 mm)
-.020" (-.508 mm)
-.030" (-.762 mm)
-.005"(-.127 mm)
-.010"(-.254 mm)
-.020" (-.508 mm)
-.030" (-.762 mm)
.097" (2.5 mm)
.125" (3.2 mm)
-.005"(-.127 mm)
-.010"(-.254 mm)
-.020" (-.508 mm)
-.030" (-.762 mm)