shelter setup instructions - colemanthis• tent fabric. things you should know:...

2
STITCH LINE SHELTER SETUP INSTRUCTIONS Before you begin • Read all instructions before set up. • Select a level site clear of rocks, branches, and other hard or sharp objects, to install your shelter. WARNING: Keep clear of overhead power lines. • Do not set up your shelter under trees because of potential lightning strikes or falling tree limbs in inclement weather. • Secure with all pegs and guylines provided to prevent property damage or personal injury. • For best results in windy conditions, position narrow end of shelter into the wind. • Do not drop shelter. • Do not bounce shelter bag on its end to remove shelter, as these actions may damage the frame. • THIS RECREATIONAL PRODUCT REQUIRES A MINIMUM OF TWO PEOPLE TO ASSEMBLE. • Under no circumstances should this product be used to cover automobiles, marine products or similar items. CAUTION: Avoid pinch points when opening and closing the shelter frame. Extend the Shelter Frame • With two persons standing at diagonal corners of the structure, grab the leg, and pull out to unfold frame. (Fig. 1) NOTE: Do not unfold frame completely. This will allow easier fit for draping shelter top over frame. 1 Set up the Shelter • Drape shelter top over frame. (Fig. 2) • Attach nylon fasteners, located on corners of shelter top, to four corners of frame post. (Fig. 2A) 2 HANDY TIP: To fully engage the push button, grip the top and bottom frame members and squeeze as shown in Fig. 3A. Be careful to avoid pinch points. • Pull up sliding bracket located on upper portion of leg until push button snaps into place. (Fig. 3) This will ensure top of frame is fully extended. • Adjust desired height until push button locks into place, making sure all four posts are level. (Fig. 6 & 7) Adjust the Height 3 • Secure shelter by driving pegs through the holes in the base of each frame post. (Fig. 8) Secure the Shelter 4 (Continued on other side) Push Button Fig. 2 Fig. 1 Instant Shelter 2A Fig. 6 Push Button Fig. 7 Fig. 8 Fig. 3 Fig. 3A (The product may look different from yours. It is for illustration purpose only.) • Secure shelter top to frame with hook provided. (Fig. 4 & 5) Fig. 5 Fig. 4

Upload: others

Post on 13-Jul-2020

6 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: SHELTER SETUP INSTRUCTIONS - ColemanTHIS• TENT FABRIC. Things You Should Know: Undercertainconditions(coldweather,highhumidity, etc.) condensation will form on the inside of your

STIT

CH L

INE

SHELTER SETUP INSTRUCTIONS

Before you begin• Readallinstructionsbeforesetup.• Selectalevelsiteclearofrocks,branches,andotherhardorsharpobjects,toinstallyourshelter. WARNING: Keep clear of overhead power lines.

• Donotsetupyourshelterundertreesbecauseofpotentiallightningstrikesorfallingtreelimbsininclementweather.

• Securewithallpegsandguylinesprovidedtopreventpropertydamageorpersonalinjury.

• Forbestresultsinwindyconditions,positionnarrowendofshelterintothewind.

• Donotdropshelter.• Donotbounceshelterbagonitsendtoremoveshelter,astheseactionsmaydamagetheframe.

• THISRECREATIONALPRODUCTREQUIRESAMINIMUMOFTWOPEOPLETOASSEMBLE.

• Undernocircumstancesshouldthisproductbeusedtocoverautomobiles,marineproductsorsimilaritems.

CAUTION: Avoidpinchpointswhenopeningandclosingtheshelterframe.

Extend the Shelter Frame•Withtwopersonsstandingatdiagonalcornersofthestructure,grabtheleg,andpullouttounfoldframe.(Fig.1)NOTE:Donotunfoldframecompletely.Thiswillalloweasierfitfordrapingsheltertopoverframe.

1

Set up the Shelter• Drapesheltertopoverframe.(Fig.2)• Attachnylonfasteners,locatedoncornersofsheltertop,tofourcornersofframepost.(Fig.2A)

2

HANDY TIP: Tofullyengagethepushbutton,gripthetopandbottomframemembersandsqueezeasshowninFig.3A.Becarefultoavoidpinchpoints.

• Pullupslidingbracketlocatedonupperportionofleguntilpushbuttonsnapsintoplace.(Fig.3)Thiswillensuretopofframeisfullyextended.

•Adjustdesiredheightuntilpushbuttonlocksintoplace,makingsureallfourpostsarelevel.(Fig.6&7)

Adjust the Height3

•Secureshelterbydrivingpegsthroughtheholesinthebaseofeachframepost.(Fig.8)

Secure the Shelter4

(Continued on other side)

PushButton

Fig. 2

Fig. 1

Instant Shelter

2A

Fig. 6

PushButton

Fig. 7

Fig. 8

Fig. 3

Fig. 3A

(The product may look different from yours. It is for illustration purpose only.)

• Securesheltertoptoframewithhookprovided.(Fig.4&5)

Fig. 5Fig. 4

Page 2: SHELTER SETUP INSTRUCTIONS - ColemanTHIS• TENT FABRIC. Things You Should Know: Undercertainconditions(coldweather,highhumidity, etc.) condensation will form on the inside of your

ColemanBrandsPty.Ltd.Unit5-6,13LordStreet,

BotanyNSW2019Australia

Telephone:1800224350Email:[email protected]

www.colemanaustralia.com.au

©2017TheColemanCompany,Inc.Allrightsreserved.

Coleman®, ,and areregisteredtrademarksof

TheColemanCompany,Inc.

Secure the Guylines• Attachandpegoutguylines.(Fig.9)5

Disassembly• Removepegsandguylines.(Fig.9&8)• Lowertheframeonepostatatimebypressingthepushbuttonlockslocatedonlowerportionofposts.(Fig.10)

• Removethesheltertopfromframeandfoldforstorage.• Pressthepushbuttonsfoundatuppercornersoftheframe.(Fig.11)Collapseshelterframeandstoreincarrycase.

6To Store1.Allpegsmustbeplacedinthestoragebagtopreventdamagetothefabricitemsplacedinthecarrycase.2.Makesureallcomponentsarecleananddrybeforeplacingincarrycase.3.Storeinaclean,dryarea.

7 WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM

THIS TENT FABRIC.Things You Should Know:• Undercertainconditions(coldweather,highhumidity,etc.)condensationwillformontheinsideofyourshelter.Condensationiscausedbywatervaporfromyourbreath,perspiration,oranywetclothinginsidetheshelter.ItisNOTLEAKAGE throughtheshelterfabric.

• Treelimbs,treesap,birddroppings,ormoisturesteadilydrippingofftreelimbscancausedamagetotheshelterfabricanditscoatingresultinginleaksorlossofflame-resistantproperties.

• Neverstoreshelter,evenforashortperiodoftime,withoutdryingit thoroughlyandbrushingoffcakeddirt.Donotpackpegsinsideyourshelter.Useaseparatestoragebag.

• Pegsshouldberemovedbypullingonthepegitself.NEVERPULLONTHESHELTERTOREMOVEPEGSASTHISCOULDRESULTINPROPERTYDAMAGEORPERSONALINJURY.

• Donotleaveyourshelterset-upforweeksatatime.Beawarethatexposuretoultravioletraysfromthesuncanseriouslydamagematerialand/orcauseittobecomediscolored.

• Thisproductisnotintendedtobeusedduringheavyrain,wind,hail,snoworotherinclementweather.Excesswaterbuild-upcancausetheframesystemtobecomeunstable,andpossiblycollapse,causinginjury.

• Thesheltertop,screen,andsunwall(ifincluded)shouldbecarefullyremovedduringwindyconditionstoavoiddamagetoproductorpersonalinjury.

• DONOTusegasorflamesourcesunderornearthisproduct.

ThistentmeetstheflammabilityrequirementsofCPAI-84.Thefabricmayburnifleftincontinuouscontactwithanyflamesource.Theapplicationofanyforeignsubstancetothetentfabricmayrendertheflame-resistantpropertiesineffective.

Fig. 9

Guyline

PushButton

PushButton

Fig. 11Fig. 10

4010038324 (ECN20060939-02)

STIT

CH L

INE