sharp people sharp ideas sharp tools - ntk cutting tools ... duo 4 versatile double-ended id...

www.youtube.com/ntkcuttingtoolswww.ntkcuttingtools.com

Sharp people

　　 Sharp ideas

　　　　 Sharp tools

Tooling fo

r Sw

iss-type Lathes

Catalog 200-S

NGK SPARK PLUGS (U.S.A), INC.Cutting Tool Sales Office

46929 Magellan Dr., Wixom, Ml 48393 U.S.A.Tel. ; +1-248-668-0100Fax ; +1-248-668-0200

NGK DO BRASIL LTDA.CERAMICA E VELAS DE IGNICAO

Estrada Mogi-Salesopolis, km 09 Bairro Cocuera,Mogi das Cruzes (SP), Brazil

Tel. ; +55-11-4793-9092Fax ; +55-11-4793-8270

NGK SPARK PLUGS (U.K), LTDMaylands Avenue, Hemel

Hempstead, Herts, HP24SD, U.K.Tel. ; +44 1442-281-000Fax ; +44 1442-281-080

NTK TECHNICAL CERAMICSKOREA CO.,LTD.

680-14 Kojan-Dong, Namdong-kuIncheon, Korea

Tel. ; +82-32-815-6763Fax ; +82-32-815-6762

NGK Spark Plug (Shanghai) Co., Ltd.No.736 Songsheng Road SongjiangIndustrial Zone, Shanghai 201613,

The People's Republic of ChinaTel. ; +86-21-63857652Fax ; +86-21-63853690

NGK SPARK PLUG EUROPE GmbHHarkortstr.41

40880 Ratingen, GermanyTel. ; +49 2102 974-350Fax ; +49 2102 974-399

NTK Cutting ToolsItaly Liaison OfficeVia delle Azalee, 15

20090 Buccinasco (MI), ItalyTel. ; +39.02.488.86.91 Fax ; +39.02.488.42.717

NGK SPARK PLUGS(THAILAND) CO.,LTD.

700/864 Moo1, Panthong sub-district,Panthong District, Chonburi

20160, ThailandTel. ; +66-38-185-306Fax ; +66-38-185-316

NGK SPARK PLUG CO.,LTD.Technical Ceramics Group Cutting Tool

Overseas Sales & Marketing 2808, Iwasaki, Komaki, Aichi

485-8510, JapanTel. ; +81-568-76-1538Fax ; +81-568-76-1288

SPARK PLUGS (USA), INC.

DISTRIBUTED BY

【NOV.,2011】

NTK Cutting ToolsDivision of NGK Spark Plugs USA46929 Magellan Drive, Wixom, MI 48393, U.S.A.Phone: 248-668-0100 Fax: 248-668-0200Toll Free: 866-900-9800

www.ntkcuttingtools.comwww.youtube.com/ntkcuttingtools

SSﾊﾞｲﾄｶﾀﾛｸﾞ11_英語版_ﾚﾀｰｻｲｽﾞ_表紙.indd 1 2012/07/18 10:29:55

◦Stick Duo �� 4Versatile double-ended ID tooling.

◦Mogul Bar �� 6High rigid boring bars with coolant through.

◦Thread Whirling �� 8High-performance threading tools.

◦PD1 ��10New PCD grade for turning and more.

◦DS Sleeve��11Prevents oil and chips from damaging live stations.

◦Shifted Tool Holders ��12More convenience for thread whirling customers.

◦Saturn Duo ��13Double-ended face grooving tools.

◦UL Chipbreaker ��14Negative inserts as sharp as positive inserts.

C O N T E N T S

Page4

21

39

49

59

73

85

105

109

123

135

129

New Products

NTKCuttingToolsTooling forSwiss-type Lathes

16

18

19

New Products

General / Front Turning

Back Turning

Cut-off / Parting

Grooving

Threading

ID Tooling

Indexable End Mills

NTK Unique Tooling

Technical Information

Index

Order Codes

Chipbreakers

Insert Grades

Cutting Condition Chart

4

STICK DUO HyperNEW

New!

Index Double-ended ID Tools with Ease!!

Clamp screws ensure excellent repeatability in cutting edge location.

Ball screw determines overhang amount.・Unique insert design prevents cutting edge from chipping.

◦Indexable double-ended solid carbide ID tools - No adjustment required for each index.◦Excellent repeatability in inserts and holders (see next page for detail).◦Adjustable overhang amount by adjusting internal ball screw location◦Wear resistant multi-layer PVD coating.◦Competitive price per corner performance.

Hyper

Features

Design

New

Pro

duct

s

5

f

L1Y

0.2

④①

③

②

X direction

Y direction

Z direction

Offset f: ＋/－ .0006"Tool Length L1: ＋/－ .0008"

Centerline Y: ＋.002"/－.000" Corner R: ＋/－ .0006"

1. Unstable depth(Including dimension on face) Tool Length

Caused by tolerance in

2. Unstable ID at d1& d2 Centerline height

3. Unstable finish and depth of cut Corner R

4. Unstable ID Offset

X direction4

2

0

-2

-4

Defl

ectio

n(μｍ）

Measurements1 2 3 4 5 6 7 8 9 10

Y direction4

2

0

-2

-4 MeasurementsDefl

ectio

n(μｍ）

1 2 3 4 5 6 7 8 9 10

Z direction4

2

0

-2

-4

Defl

ectio

n(μｍ）

Measurements1 2 3 4 5 6 7 8 9 10

Repeatability

Excellence in Repeatability and Precision

Typical issues caused by poor tolerance

Excellent repeatability ensures high-precision machining!

Tool Tolerance

Application Example

See page 88 for stock items.

New

Pro

duct

s

6

Stress distribution Vibration analysis

MogulBar

Other boring bars

Note: Assuming a 100N load is applied. Equal amount of force was applied to both bars for vibration analysis.Boring bar used in above analysis: S08H-STUPR09D10-OH

NEW Mogul Bar High rigidity boring bar

High rigidity + Minimum flat widthReduced vibration

Large clearance for improved chip evacuation.

20% lower deflection

Lower stress

High stress

L/D=5

Minimum bore diameter:

.197" (5.0㎜)

All MogulBar boring bars are coolant through.

Note: Please use coolant for boring deeper than .787" (20㎜).It is recommended to seal the coolant hole with silicon or plastic when coolant is not used for boring.

Recommended amount of overhang

4.0

3.2

2.4

1.6

0.8

.160 .240 .320 .400 .480 .560 .640 .720

Ｌ：Overhang amount (inch)

D：Shank diameter (inch)

Steel shankSteel shank

Carbide shankCarbide shank

Steel Shank

Carbide Shank

L/D≦5

L/D≦7L：OverhangD：Shank diameter

Engraving for improved usability

◦Overhang amount graduation

◦ Item number and minimum bore diameter　(ex: D10=φ10㎜）

◦Clapm screw item number

[Cutting condition example]　Work materials: Alloy steel, stainless　 = 260 SFM, = .002 ～ .004 IPR, = .004" ～ .020" Depth of cut

Reduced duration of vibration

Mogul Bar - Features


New

Pro

duct

s

7

F Chipbreakers - Features

F Chipbreakers - Evacuate chips BACKWARD

DOC（inch）

Feed（IPR）.002 .004

FG Chipbreaker

◦ Best for finishing ◦ Works for small DOC.（.020" or less）◦ High rake angle

.004

.012

F1/F05 Chipbreakers

◦ Cover wide range◦ Ground chipbreaker

.020

Note: Right-hand inserts with FG and F1 chipbreakers should be used with right-hand holders.

[Cutting condition example]4140 Carbon Steel　Diameter : φ.472"Speed : =260SFM　DOC : 20㎜　Holder : S10K-STUPR11D12-OH　Insert : TPGH110304　Wet

FG

F1・F05

Depth of cut (inch)

Feed rate (IPR)0 .002 .004 .006 .008

.012

.020

.040

.060

F chipbreakers allow chips to evacuate backward.Combination of the F chipbreakers and MogulBar brings the best performance.

■ Recommended Cutting Condition Range

New

Pro

duct

s

8

◦Reduce cycle time by more than half.*◦ 6.5㎜ (.256") thick inserts accommodate

large pitch and lead.

* Applies to cycle time for thread whirling only. Does not apply to total cycle time. Actual results may vary.

NEW THREAD WHIRLING High performance thread forming

NTK Thread Whiring - Nonstop improvement to meet tighter-than-ever demands from quality-oriented customers.

◦Dramatically improved producitivity in thread forming operations.

◦NTK's unique design technology (patented) makes precise and correct inserts possible without any redesign and remake.

◦Excellent surface finish and longer tool life than competitors'.

◦Sharp cutting edge for reduced tool pressure and superior chip control.

Features

Form multiple-lead threads in a single-pass.

Double-lead threads Triple-lead threads

Work Bone screw Worm gear

Work material Ti-6Al-4V ELI brass

Work appearance

Insert appearance

Major Dia. φ.157"(4.0㎜) φ.278"(7.0㎜)

Minor Dia. φ.094"(2.4㎜) φ.185"(4.7㎜)

Pitch φ.135"(3.42㎜) φ.193"(4.9㎜)

Patented

NTK’s Unique Attachment System

Mutiple-Lead Thread Whirling

①Loosen the Mounting Bolts. ② Rotate the Insert Holder to 10 degrees. ③ Pull the Whirling Insert Holder without pull out the Mounting Bolts.

Insert HolderMount Adapter

InsertInsert Holder Mounting Bolt

NTK’s whirling insert holder can be attached and detached without removing mounting bolts.

Adapter Mounting Bolt

New

Pro

duct

s

9

NTK thread whirling inserts are all made to order (except for the ISO style threads shown below). Please follow the procedure to order correct NTK thread whirling systems and inserts.

Thread whirling order procedure

Recommended Cutting Conditions

⑴　 Fill out the NTK Thread Whirling Quote Request Form. (The form is available at www.ntkcuttingtools.com/whirling)⑵　 Send the form and a full part drawing to NTK by e-mail ([email protected]) or by fax (see the back cover).⑶　The quote for NTK thread whirling tooling will be issued through your local NTK distributor.⑷　Use the item numbers shown in the quote to place an order.⑸　 After NTK thread whirling tooling arrived, make sure to use the helix angle provided by NTK to set up, and run your jobs.

Recommended cutting conditionsWhirling cutter RPM Main spindle RPM Feed Rate

1,000-4,000 min－1 10-30 min－1 Same as thread pitch（for single-lead threads）

Typical worksDiameter Work Materials

φ0.118 to φ0.394 inch（For cutters with 12㎜ ID.）

Titanium, Titanium alloy,316 Stainless

Standard thread whirling inserts for ISO style threads.

Item Number e P r4 r5Thread type Callout

ZM3Order Code Stock

TW5835-HA1.5-D12 1.5 0－0.15 1.1 0－0.1 0.1 0.5 0.3 0.1 35° 3° HA1.5

ISO5835

5818356 ○

TW5835-HA2.0-D12 2.0 0－0.15 1.3 0－0.1 0.1 0.6 0.4 0.1 35° 3° HA2.0 5818349 ○

TW5835-HA2.7-D12 2.7 0－0.15 1.9 0－0.15 0.1 1 0.6 0.2 35° 3° HA2.7 5818323 ○

TW5835-HA3.5-D12 3.5 0－0.15 2.4 0－0.15 0.1 1.25 0.8 0.2 35° 3° HA3.5 5818315 ○

TW5835-HA4.0-D12 4.0 0－0.15 2.9 0－0.15 0.1 1.5 0.8 0.2 35° 3° HA4.0 5818307 ○

TW5835-HA4.5-D12 4.5 0－0.15 3.0 0－0.15 0.1 1.75 1 0.3 35° 3° HA4.5 5818281 ○

TW5835-HA5.0-D12 5.0 0－0.15 3.5 0－0.15 0.1 1.75 1 0.3 35° 3° HA5.0 5818273 ○

TW5835-HB4.0-D12 4.0 0－0.15 1.9 0－0.15 0.1 1.75 0.8 0.3 25° 5° HB4.0 5818265 ○

TW5835-HB6.5-D12 6.5 0－0.15 3.0 0－0.15 0.2 2.75 1.2 0.8 25° 5° HB6.5 5818257 ○

TW9268-HC2.9-D12 2.79 to 2.9 2.03 to 2.18 0.1max 1.06 ― ― ― ― HC2.9

ISO9268

5818240

TW9268-HC3.5-D12 3.43 to 3.53 2.51 to 2.64 0.1max 1.27 ― ― ― ― HC3.5 5818232

TW9268-HC3.9-D12 3.78 to 3.91 2.77 to 2.92 0.1max 1.27 ― ― ― ― HC3.9 5818224

TW9268-HC4.2-D12 4.09 to 4.22 2.95 to 3.25 0.1max 1.27 ― ― ― ― HC4.2 5818216

TW9268-HD4.0-D12 4.0±0.03 2.92±0.03 0.1 1.59 ― ― 45° 10° HD4.0 5818208

TW9268-HD4.5-D12 4.5±0.03 2.92±0.03 0.1 2.18 ― ― 45° 10° HD4.5 5818190

Screw headScrew head

60° Screw head

ISO5835 HA ISO5835 HB ISO9268 HC ISO9268 HD

(Note: Must be used with thread whirling cutters with 12㎜ φDm dimension. See next page to find φDm for each cutter.)

●Stock　　○1-2 week delivery

See page 82 for available thread whirling cutters.

See page 83 for actual application examples.

New

Pro

duct

s

10

High Quality Polycrystalline Diamond (PCD) Grade

Cut-off (Parting)Back turning

Excellent choice for machining non-ferrous materials and graphite.

◦Aluminum alloys, Brass, Graphite, Copper alloys, Ceramics

◦The PCD grade for back turning, cut-off, and grooving.◦Sharp cutting edge.◦Excellent in adhesion resistance.◦Minimized build-up edge for steady high-precision machining.◦Turn faster than coated carbide grades.

General turning Multi-purpose (Grooving)

PD1NEW

Features

First Recommendation for Turning

Page 42

Page 24, 26, 30

Page 52, 53

Page 68

New

Pro

duct

s

11

First Recommendation for Turning

2.76" (70)

Set screw（SS0506）Wrench（LW-2.5）

Cap screw（CS0515）Wrench（LW-4）2.17" (55)

0.39" (10)

φ.866"

(22)

φ.630"

(16)

1.38" (35)

1.10" (28)

◦ Prevents coolant and chips from damaging live tool stations.◦ Takes DS Series holders to perform various back working.◦ Designed exclusively for 22㎜ (.886") round shank stations.◦ Compatible with 16㎜ round shank DS Series holders.*

How it works

Order code Item number Stock

Spare partsCap

screw Wrench Setscrew Wrench

5788401 SS-DSU-SK ● CS0515 LW-4 SS0506 LW-2.5

When DS holders are used directly in live tool stations, coolant and chips sneak in from the flat of holders to damage the live stations.

By using the DS Sleeve, you can use the DS Series holders without any worry about damaging live stations.

Coolant and chips sneak in.

Stop coolant and chips from damaging live tool stations.

DS SleeveNEW

Features

＊Please refer to page 118.

New

Pro

duct

s

12

■ SCLC-N-F (for "CC" style inserts)

■ SDJC-N-F (for "DC" style inserts)

1. Eliminate shims for turning holders when extended guide bushing is used (especially in thread whirling).

2. Perform finish cut without retracting roughed section (bar) to guide bushing.

Two Major FeaturesShim

GangToolPost

GangToolPost

With NTK ShiftedTurning Toolholders

Shifted Tool Holders

◦Feature 1 ◦Feature 2

Typical turning With Shifted Holders:Finish turn can be done without retracting the roughed bar.

With Conventional Holders:Roughed bar comes out when retracted for finish turn.

No shims required during thread whirling operation with an extended guide bushing.

NEW

32°

93°

.472"(１２)

95°

5°

.472"(１２)

GageInsert Item number Clamp screw Wrench

Right-hand Left-handOrder Code Stock Stock Order Code

CC..32.5..

SCLC 1015X09N-F05 10 15 120 10 5 2 LRIS-4×10 LLR-25S 5700240 ◯ ◯ 5700257 SCLC 1020X09N-F10 10 20 120 10 10 2 LRIS-4×10 LLR-25S 5700265 ◯ ◯ 5700273 SCLC 1218X09N-F06 12 18 120 12 6 0 LRIS-4×10 LLR-25S 5700364 ◯ ◯ 5700372 SCLC 1224X09N-F12 12 24 120 12 12 0 LRIS-4×10 LLR-25S 5700380 ◯ ◯ 5700398

GageInsert Item number Clamp screw Wrench

Right-hand Left-handOrder Code Stock Stock Order Code

DC..21.5..,TFD07..

SDJC 1015X07N-F05 10 15 120 10 5 0 LRIS-2.5×7 CLR-15S 5700588 ◯ ◯ 5700570SDJC 1020X07N-F10 10 20 120 10 10 0 5700562 ◯ ◯ 5700554

DC..32.5..,TFD11..

SDJC 1015X11N-F05 10 15 120 10 5 2 LRIS-4×10 LLR-25S 5700547 ◯ ◯ 5700539SDJC 1020X11N-F10 10 20 120 10 10 2 5700521 ◯ ◯ 5700513SDJC 1218X11N-F06 12 18 120 12 6 0 LRIS-4×10 LLR-25S 5700505 ◯ ◯ 5700497SDJC 1224X11N-F12 12 24 120 12 12 0 5700471 ◯ ◯ 5700463


New

Pro

duct

s

13

■ Recommended Cutting Condition for FGV Style Tooling (for Face Grooving)Steel

(Carbon Steel, Alloy Steel)Stainless Steel(Excluding 303 SS)

Free Cutting Steel(Including 303 SS)

Non-ferrous Metals(Brass, Aluminum, Copper)

Speed (SFM) 160 (100 - 330) 130 (100 - 330) 200 (100 - 330) 260 (160 - 390)

FeedRate(IPR)

GrooveDepth(Inch)

.039” .001” (.0004”-.002”) .0008” (.0004”-.002”) .002” (.0004”-.0025”) .002” (.0004”-.0025”)

.059” .0008” (.0004”-.002”) .0004” (.0002”-.001”) .001” (.0004”-.002”) .001” (.0004”-.002”)

.079” .0004” (.0002”-.001”) .0004” (.0002”-.001”) .0008” (.0004”-.002”) .0008” (.0004”-.002”)

☆Tips for Successful Face Grooving①Run multiple passes for turn wider grooves.　Make sure to groove from outer diameter to inner diameter to avoid any interference.②If lines appear on the boss section (as shown at right), slow down feed rate on retracting the tool.③If scratch appears at the end of the boss, slow down feed rate.④If groove surface looks torn, either slow down feed rate or increase speed.⑤If groove bottom looks torn under slow speed and feed condition, increase speed.

☆NoteSide turning cannot be performed with FGV style tooling.

◦FGV tools for face grooving and FBV tools for facing.◦Economical 2-corner design.◦Superb rigidity for reliable operation.◦Available in square and round shanks.◦Excellent wear resistance and sharp edge.

◦ High-rigidity design covers wide cutting condition range.◦Minimum machining diameter: .236"(6㎜)　Minimum groove width: .039"(1.0㎜)◦Left-hand tools also available.

FGV style for Face GroovingApplicable part shape

SATURN DUO Face Grooving Tool

Features

NEW

The boss of the part

See page 70 for standard items.

New

Pro

duct

s

14

UL ChipbreakerNEWFor negative inserts

①Sharp edge with "double-positive" design ②Covers wide cutting condition rangeWide coverage regardless of depth of cut and feed rate.

UL

.004.002 .006

.120

.080

.040

0

Depth of cut （Inch）

Feed rate （IPR）

Breaker for heavy depth of cut

Breaker for light depth of cut

Reduce cost in Swiss machining

Positive insert with sharp cutting edge is required for Swiss machining.

With UL chipbreaker, negative insert provides sharp cutting edge AND more corners.

Features

Cut chips and cost

◦Negative inserts as sharp edge as positive inserts.◦Lower cost per corner than positive inserts.


New

Pro

duct

s

16

Chipbreakers

Name Chipbreaker Geometry Features Chip Control Range

CL

.189 (4.8)

DCGT32.508M shown

17°

● Double-positive geometry.● Sharp edge and low tool pressure.● Wide chip control range.

.016.008.004.004.012.020.040.118.200

.002Feed (IPR)

Depth of cut (inch)

AM3

.047 (1.2)

6°

DCGT32.508 shown

● All-purpose chipbreaker.●First choice for most applications.● Great combination of sharp edge and chip control.

.016.008.004.004.012.020.040.118.200

.002Feed (IPR)

Depth of cut (inch)

AZ7

DCGT32.508MFN shown

.016 (0.4) ● Excellent chip control at light feed and light depth of cut.

.016.008.004.004.012.020.040.118.200

.002Feed (IPR)

Depth of cut (inch)

AZ8

DCMT32.508 shown

8°

.087 (2.2) ● All-purpose chipbreaker with sharp edge in spite of CVD coating.

.016.008.004.004.012.020.040.118.200

.002Feed (IPR)

Depth of cut (inch)

FG

.059 (1.5)

TPGH221 shown

17°

●Exclusively designed for ID boring.● Evacuate chips backward at light depth of cut.●Sharp cutting edge with high rake.

.016.008.004.004.012.020.040.118.200

.002Feed (IPR)

Depth of cut (inch)


ZP

CNMG432

●Double-positive rake and sharp cutting edge.● Low tool pressure even at heavy depth of cut.

.016.008.004.004.012.020.040.118.200

.002Feed (IPR)

Depth of cut (inch)

U2

TNGG08F shown

.091 (2.3)

R

● Reduced burr and work hardening due to high rake design.

.016.008.004.004.012.020.040.118.200

.002Feed (IPR)

Depth of cut (inch)

UL

TNGG3304MFN shown

20°

.157(4.0) ● Negative insert with positive insert's chipbreaker.●Reduced burr. Improved microfinish.● Superb advantage in cost per edge over positive inserts.

.016.008.004.004.012.020.040.118.200

.002Feed (IPR)

Depth of cut (inch)

■Molded Chipbreakers for Positive Inserts

■Molded Chipbreakers for Negative Inserts

Chip

brea

kers

17


KHG＊

DCET32.508 shown

.040 (1.0)

14°

● Superb chip control at finishing range.● For super high-precision machining.● Tolerance in corner radius: ±.0004"

.016.008.004.004.012.020.040.118.200

.002Feed (IPR)

Depth of cut (inch)

UHG＊

.043 (1.1)

R

DCET32.504MR shown

●Shap cutting edge.●Covers wide cutting condition range.

.016.008.004.004.012.020.040.118.200

.002Feed (IPR)

Depth of cut (inch)

U/U1

.063 (1.6)

DCGT32.508 shown

R

●Sharp cutting edge prevents materials from work hardening.

.016.008.004.004.012.020.040.118.200

.002Feed (IPR)

Depth of cut (inch)

S

DCGT32.508 shown

15°

.040 (1.0) ● Standard ground chipbreaker with wide cutting condition coverage.● Sharp cutting edge with superb chip control.

.016.008.004.004.012.020.040.118.200

.002Feed (IPR)

Depth of cut (inch)

F05TPGP5208F shown

3°

.051 (1.3) ● Exclusively designed for ID boring.●Evacuate chips backward.● Excellent choice for blind hole machining.

.016.008.004.004.012.020.040.118.200

.002Feed (IPR)

Depth of cut (inch)

F1

TPGP2208F shown

.071 (1.8)

3°

.016.008.004.004.012.020.040.118.200

.002Feed (IPR)

Depth of cut (inch)

B1TCGP5208FV shown

.006 (0.15)

.024 (0.6)

10°

● Stable cutting brought by sharp and tough cutting edge in boring.

.016.008.004.004.012.020.040.118.200

.002Feed (IPR)

Depth of cut (inch)

B2

TPGP7308F shown

.006 (0.15)

.040 (1.0)

10°

.016.008.004.004.012.020.040.118.200

.002Feed (IPR)

Depth of cut (inch)

B3.016.008.004

.004

.012

.020

.040

.118

.200

.002Feed (IPR)

Depth of cut (inch)

A

CPGP03Y shown

.006 (0.15)

.040 (1.0)

14°

●Tough cutting edge and good chip control.●General-purpose ID chipbreaker

.016.008.004.004.012.020.040.118.200

.002Feed (IPR)

Depth of cut (inch)

A1

A

A1

A2

ERGP52Y-F shown

.031 (0.8)

20°

● Control chips at light feed and light depth of cut.●Sharp cutting edge due to large rake angle.

.016.008.004.004.012.020.040.118.200

.002Feed (IPR)

Depth of cut (inch)

■Ground Chipbreakers for Positive Inserts

＊Available only for E tolerance inserts.

Chip

brea

kers

18

QM3VM1

TAS

TM1 TM4

ZM3

Continuous HeavilyInterrupted

Interrupted

Hardness

■ Stainless Steel

Insert Grades

Grade Name Coating Type Applications

Material Properties

Comparison by GradeDensity

/㎠

Hardness

HRA

BendingStrength

GPa

Young'sModulus

GPa

ThermalExpansion

Coef.X10－6/K

HeatConductivity

W/m・K

QM3PVD TiCN (Thick)

◦ Stainless, Steel, High-nickel alloys, Abrasive materials including Cobalt Chrome.

◦ Demanding applications (such as grooving and interrupted cut) for metals in general.

14.4 91.0 3000 580 5.8 63

VM1PVD TiCN (Thin)

◦ Titanium, Non-ferrous metals, Stainless, Steel, Rare metals (including platinum), Plastics

◦Very small part applications. 14.8 92.0 2500 640 5.7 84

TASPVD TiAlN

◦ High-speed turning of Titanium, Stainless Steel. High-nickel alloys, Hard turning

14.8 92.0 2500 640 5.7 84

TM4・TM1PVD Multi-Layer

◦ Covers applications for QM3 and ZM3. Sharper edge than QM3, more wear resistant than ZM3.

14.4 91.0 3000 580 5.8 63

14.8 92.0 2500 640 5.7 84

ZM3PVD TiN

◦ Covers applications for VM1 and KM1. Tougher than VM1.

14.4 91.0 3000 580 5.8 63

KM1Uncoated

◦ Aluminum, Non-ferrous metals (especially if VM1 and ZM3 don't work due to adhesion and sharper edge requirement.) 14.8 92.0 2500 640 5.7 84

CP7CVD Al2O3-TiCN

◦ For Roughing steel, stainless steel, and carbon steel. Toughest NTK micrograin carbide grade. 13.8 90.1 2200 580 ― ―

CP7

QM3VM1

TM1 TM4

ZM3


Interrupted

Hardness

■ Carbon Steel, Alloy Steel

KM1ZM3


Interrupted

Hardness

■ Aluminum, Brass

■PVD / CVD Coated Micrograin Carbide

■Cermet

■Polycrystalline Diamond (PCD)


Material Properties

Comparison by GradeDensity

/㎠

Hardness

HRA

BendingStrength

GPa

Young'sModulus

GPa

ThermalExpansion

Coef.X10－6/K

HeatConductivity

W/m・K

C7XUncoated Cermet

◦ High-speed finishing of steel, stainless steel, carbon steel. Tougher than XT3.

7.0 91.5 1,800 440 8.2 31

XT3Uncoated Cermet TiN

◦ High-speed finishing of steel, stainless steel, carbon steel, ductile steel. More wear resistant than C7X. 6.3 92.5 1,700 450 8.4 21


PD1 Polycrystalline Diamond (PCD)

◦ KM1 applications (Aluminum, Non-ferrous metals including copper) at higher speed and with longer tool life.

C7X

XT3


Interrupted

Wear Resistance

■ Steel

（TM1）

（TM4）

Inse

rt G

rade

s

19

Cutting Condition Chart

MATERIAL DOC (Inch) Surface Speed (SFM)QM3/TM4 TAS/TM1 VM1 ZM3 CP7 KM1

300 & 400 series stainless ≦ 220 Bhn

.010≦ 150 to 500 300 to 700 200 to 600 75 to 300 NR 50 to 150.010 - .040 125 to 400 200 to 500 175 to 500 75 to 250 NR 50 to 125.040 - .080 100 to 350 175 to 400 150 to 400 75 to 200 250 to 600 40 to 100≧ .080 75 to 250 100 to 300 NR 50 to 150 200 to 550 30 to 80

303L, 303Var & Ph series stainless

220 to 350 Bhn

.010≦ 150 to 350 200 to 500 150 to 350 50 to 200 NR 30 to 125.010 - .040 125 to 300 125 to 400 100 to 300 50 to 175 250 to 600 30 to 100.040 - .080 100 to 250 100 to 350 75 to 200 50 to 150 200 to 500 30 to 80≧ .080 75 to 200 NR NR 50 to 125 200 to 400 30 to 80

400 series SS Ph series stainless

35 Rc to 48 Rc


400 series SS Ph series stainless

48 Rc to 55 Rc


Tool Steels Bearing steels

Bio-dur Cobalt Chrome 45 Rc to 55 Rc

.010≦ 100 to 200 125 to 250 100 to 200 60 to 150 NR NR.010 - .040 75 to 175 100 to 200 100 to 175 50 to 125 150 to 400 NR.040 - .080 50 to 125 75 to 150 75 to 125 50 to 100 125 to 350 NR≧ .080 50 to 100 NR NR NR 100 to 275 NR

Carbon Steels 140 to 240 Bhn

.010≦ 150 to 500 175 to 750 150 to 700 75 to 400 175 to 750 NR.010 - .040 125 to 450 150 to 700 125 to 600 75 to 350 150 to 700 NR.040 - .080 100 to 400 125 to 650 100 to 450 60 to 250 125 to 650 NR≧ .080 75 to 300 100 to 550 75 to 250 50 to 200 100 to 550 NR

Carbon Steels 240 to 320 Bhn

.010≦ 100 to 450 125 to 700 150 to 650 75 to 350 150 to 700 NR.010 - .040 125 to 450 125 to 650 125 to 600 75 to 300 100 to 650 NR.040 - .080 100 to 400 75 to 550 100 to 450 60 to 200 75 to 550 NR≧ .080 75 to 300 75 to 450 75 to 250 50 to 175 75 to 500 NR

Fiber Filled & Thermoset Plastics

.010≦ NR NR 50 to 600 50 to 500 NR 50 to 450.010 - .040 NR NR 50 to 500 50 to 400 NR 50 to 350.040 - .080 NR NR 50 to 400 50 to 350 NR 50 to 300≧ .080 NR NR 50 to 350 50 to 300 NR 50 to 250

Titanium & Titanium alloys

.010≦ ★ 100 to 200 125 to 225 50 to 150 40 to 150 NR 30 to 125.010 - .040 ★ 100 to 175 100 to 200 50 to 125 40 to 125 NR 30 to 100.040 - .080 ★ 75 to 150 90 to 175 40 to 100 40 to 100 NR 30 to 80≧ .080 ★ 50 to 125 75 to 150 50 to 125 50 to 100 NR 40 to 90

High Nickel Steels Inconel, Hasteloy, Rene, Hansen,

MP35N, etc. 36 to 48 Rc

.010≦ ★★100 to 150 100 to 225 50 to 150 40 to 125 NR 30 to 175.010 - .040 ★★ 75 to 150 100 to 200 50 to 130 40 to 100 NR 30 to 150.040 - .080 ★★ 75 to 125 80 to 175 40 to 100 40 to 100 75 to 150 30 to 100≧ .080 ★★ 50 to 125 70 to 150 40 to 125 40 to 100 75 to 150 30 to 80

★ Recommended for cut-off and grooving. ★★ 75 to 150 SFM for cut-off and grooving.

1st choice2nd choice

3rd choiceNR Not recommended

■ Recommended Feed Rate by Chip Breaker (for Medical Materials)

DESIGNATION DOC FEED (IPR)AZ7 ≤ .060" .0003 to .0035

AM3

Covers a whole range of DOC from .001" to maximum recommended for insert. Max feed is .004 IPR.

≤ .060" .0003 to .0025RS / LS ≥ .080" .0005 to .005

Note: Above numbers are starting points. Optimum speed and feed may vary depending on the applications.

Cutti

ng C

ondit

ion C

hart

21

General Turning / Front Turning

◦General (ANSI / ISO) Turning �� 22◦Front Turning �� 36

Gene

ral /

Fro

nt T

urnin

g

22


●Advantage for each geometryCC.. Style DC.. Style VC.. Style

Increased toughness. Cutting edge is close to insert pocket.

Versatile geometry. Toughness of CC.. with flexibility of VC..

Wide coverage in work geometry.

●For Undercuts

30°45°

CC.. Style DC.. Style VC.. Style

Not applicable to undercut. Up to 30 deg. undercuts. Up to 45 deg. undercuts.

●Chip Control and FinishSCLCR ➡Page 25 SDJCR ➡Page 27 SDNCN ➡Page 27

Strong clamping.High dimensional repeatability.

Increased room for chip evacuation.Prevent chips from scratching works.

Chips flow away from the work.

■ General Turning Inserts Explained

Gene

ral /

Fro

nt T

urnin

g

23

■ Surface Finish in General Turning by Inserts with Wiper Flat

■ Roughing and Finishing Long Work on Swiss Lathes●Shifted Holders

●Combination of Grooving Tool and DS Holders

Guide bushing

Inserts with wiper

Slower feed rate brings better finish but sacrifices cycle time, chip control, and tool life.

Fast feed rate improves chip control but worsens surface finish.

Inserts with wiper flat bring good chip control and surface finish.

SCLC-N-F ➡Page 12

SDJC-N-F ➡Page 12

Rough with grooving tool for good chip control.

Shifted Holders make finishing process possible without worrying about bar stock coming off guide bushing.Thanks to the increased room between the tools and guide bushing, coolant flows effectively to improve chip control.

Finishing can be done by using general turning inserts with DS Holders.

GTVW Holders ➡Page 67 DS Holders ➡Page 118

TFD ➡Page 26

for SDJC tool holders

TFT ➡Contact NTK

for STAC tool holders

TFV ➡Page 30

for SVAC tool holders

Wiper Flat Insert - Product Lines

Gene

ral /

Fro

nt T

urnin

g

24


Note: F1 chipbreaker is also available for CC.. inserts. Contact NTK for detail.

80-deg Diamond ("CC" Style)Insert Grade

CCGT-AM3 Item Number ISO Item Number IC Radius VM1 QM3 TAS TM4 C7X

Molded Chipbreaker

CCGT 21.501 FN AM3 CCGT 060200 FN AM3 1/4" .001" ● ● ●CCGT 21.504M FN AM3 CCGT 060201M FN AM3 .003" ●CCGT 21.504 FN AM3 CCGT 060201 FN AM3 .004" ●CCGT 21.508M FN AM3 CCGT 060202M FN AM3 .007" ● ●CCGT 21.508 FN AM3 CCGT 060202 FN AM3 .008" ● ●CCGT 21.51M FN AM3 CCGT 060204M FN AM3 .015" ● ○CCGT 21.51 FN AM3 CCGT 060204 FN AM3 .016" ●CCGT 32.501 FN AM3 CCGT 09T300 FN AM3 3/8" .001" ○ ● ● ●CCGT 32.504M FN AM3 CCGT 09T301M FN AM3 .003" ● ● ● ●CCGT 32.504 FN AM3 CCGT 09T301 FN AM3 .004" ●CCGT 32.508M FN AM3 CCGT 09T302M FN AM3 .007" ● ● ● ●CCGT 32.508 FN AM3 CCGT 09T302 FN AM3 .008" ●CCGT 32.51M FN AM3 CCGT 09T304M FN AM3 .015" ● ●CCGT 32.51 FN AM3 CCGT 09T304 FN AM3 .016" ●CCGT 32.52 FN AM3 CCGT 09T308 FN AM3 .031" ● ●

CCGT-S Item Number ISO Item Number IC Radius VM1 QM3 TAS TM4 C7X

Right-handGround Chipbreaker

CCGT 21.501 RS CCGT 060200 RS 1/4" .001" ○ ●CCGT 21.504M RS CCGT 060201M RS .003" ●CCGT 21.504 RS CCGT 060201 RS .004" ○ ○CCGT 21.508M RS CCGT 060202M RS .007" ●CCGT 21.508 RS CCGT 060202 RS .008" ● ○CCGT 21.51 RS CCGT 060204 RS .016" ●CCGT 32.501 RS CCGT 09T300 RS 3/8" .001" ○ ● ●CCGT 32.504M RS CCGT 09T301M RS .003" ●CCGT 32.504 RS CCGT 09T301 RS .004" ○ ●CCGT 32.508M RS CCGT 09T302 RS .007" ●CCGT 32.508 RS CCGT 09T302 RS .008" ○ ●CCGT 32.51 RS CCGT 09T304 RS .016" ●

Left-handGround Chipbreaker

CCGT 21.501 LS CCGT 060200 LS 1/4" .001" ○CCGT 21.504 LS CCGT 060201 LS .004" ○ ○CCGT 21.508 LS CCGT 060202 LS .008" ○ ○CCGT 32.501 LS CCGT 09T300 LS 3/8" .001" ○CCGT 32.504 LS CCGT 09T301 LS .004" ○CCGT 32.508 LS CCGT 09T302 LS .008" ○

CCMW Item Number ISO Item Number IC Radius PD1

PCD tipped, Flat top

CCMW 32.504 CCMW 09T301 3/8" .004" ○CCMW 32.508 CCMW 09T302 .008" ○CCMW 32.51 CCMW 09T304 .016" ○CCMW 32.52 CCMW 09T308 .031" ○

Thickness of insert Inch MetricCC..21.5.. 3/32" 2.38CC..32.5.. 5/32" 3.97

CCGT-U Item Number ISO Item Number IC Radius VM1 QM3 TAS ZM3 C7X

Ground Chipbreaker （RH）

CCGW 32.504 RU1 CCGT 09T301 RU1 3/8" .004" ●

CCGW 32.508 RU1 CCGT 09T302 RU1 .008" ●

CCGT-AZ7 Item Number ISO Item Number IC Radius VM1 QM3 TAS TM4

Molded Chipbreaker

CCGT 32.501 FN AZ7 CCGT 09T300 FN AZ7 3/8" .001" ○ ● ● ○CCGT 32.504M FN AZ7 CCGT 09T301M FN AZ7 .003" ○ ● ● ○CCGT 32.508M FN AZ7 CCGT 09T302M FN AZ7 .007" ○ ● ● ○CCGT 32.51M FN AZ7 CCGT 09T304M FN AZ7 .015" ○ ● ● ○CCGT 32.52 FN AZ7 CCGT 09T308 FN AZ7 .031" ○ ● ● ○

*** PD1 is PCD diamond tipped grade for aluminum and non-ferrous materials.

●Stock　　○1-2 week deliverySee page 129 for order code.

Gene

ral /

Fro

nt T

urnin

g

25

Tool Holders for CC.. Inserts

■SCLC

■DS-SCLL

5°

4.724(120)

ＡＡ

９5°

0.0

A A

95°

5°

.787

φ

(20)

0.0

AA

95°

5°1/8NPT

φ

Right-Hand style shown

(Inch, Metric)GageInsert Item number Clamp screw Wrench

Right-hand Left-hand(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock Order Code Stock

CC..21.5.. SCLCR/L-062C 3/8" 3/8" 3/8" 0.0 LRIS-2.5 × 7 CLR-15S 5567672 ● 5567698 ●SCLCR/L-082C 1/2" 1/2" 1/2" 0.0 LRIS-2.5 × 7 CLR-15S 5307293 ● 5307301 ●

CC..32.5.. SCLCR/L-083C 1/2" 1/2" 1/2" 0.0 LRIS-4 × 10 LLR-25S 5567680 ● 5567706 ●SCLCR/L-103C 5/8" 5/8" 5/8" 0.0 LRIS-4 × 10 LLR-25S 5574207 ● 5574215 ●

CC..21.5.. SCLCR/L0808X06N .315 8 .315 8 .315 8 0.0 LRIS-2.5 × 7 CLR-15S 5137021 ○ 5137898 ○CC..32.5.. SCLCR/L1212X09N .472 12 .472 12 .472 12 0.0 LRIS-4 × 10 LLR-25S 5137039 ○ 5137872 ○

(Inch, Metric)GageInsert Item number φ Clamp screw Wrench Order Code Stock

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜)

CC..21.5..

DS-SCLL15H-06 5/8" .591 15 3.937 100 .236 6.0 LRIS-2.5X7 CLR-15S 5486923 ○DS-SCLL19-06 3/4" .709 18 4.724 120 .236 6.0 LRIS-2.5X7 CLR-15S 5338876 ●DS-SCLL20X-06 .787 20 .748 19 3.740 95 .236 6.0 LRIS-2.5X7 CLR-15S 5520630 ○DS-SCLL20-06 .787 20 .748 19 4.724 120 .236 6.0 LRIS-2.5X7 CLR-15S 5388608 ●DS-SCLL22-06 .866 22 .827 21 4.724 120 .236 6.0 LRIS-2.5X7 CLR-15S 5484936 ●DS-SCLL25-06 1" .945 24 5.906 150 .236 6.0 LRIS-2.5X7 CLR-15S 5486691 ●

CC..32.5..

DS-SCLL15H-09 5/8" .591 15 3.937 100 .236 6.0 LRIS-4X8 LLR-25S 5486931 ○DS-SCLL19-09 3/4" .709 18 4.724 120 .236 6.0 LRIS-4X8 LLR-25S 5338884 ●DS-SCLL19-09-004* 3/4" .709 18 4.724 120 .413 10.5 LRIS-4X8 LLR-25S 5629670 ●DS-SCLL20X-09 .787 20 .748 19 3.740 95 .236 6.0 LRIS-4X8 LLR-25S 5520655 ○DS-SCLL20-09 .787 20 .748 19 4.724 120 .236 6.0 LRIS-4X8 LLR-25S 5374699 ●DS-SCLL22-09 .866 22 .827 21 4.724 120 .236 6.0 LRIS-4X8 LLR-25S 5401096 ●DS-SCLL22-09-005* .866 22 .827 21 4.724 120 .472 12.0 LRIS-4X8 LLR-25S 5629688 ●DS-SCLL25-09 1" .945 24 5.906 150 .236 6.0 LRIS-4X8 LLR-25S 5486709 ●

Note: Use right-hand or neutral inserts for DS-SCLL bars.

●Stock　　○1-2 week delivery＊Comes with coolant through.

DS-SCLL19-09-004DS-SCLL22-09-005(Coolant through)

Gene

ral /

Fro

nt T

urnin

g

26


55-deg Diamond ("DC" Style)Insert Grade

DCGT-AM3 Item Number ISO Item Number IC Radius VM1 QM3 TAS ZM3 TM4 C7X

Molded Chipbreaker

DCGT 21.501 FN AM3 DCGT 070200 FN AM3 1/4" .001" ○ ● ● ●DCGT 21.504M FN AM3 DCGT 070201M FN AM3 .003" ● ●DCGT 21.504 FN AM3 DCGT 070201 FN AM3 .004" ○ ● ●DCGT 21.508M FN AM3 DCGT 070202M FN AM3 .007" ● ●DCGT 21.508 FN AM3 DCGT 070202 FN AM3 .008" ○ ● ●DCGT 21.51M FN AM3 DCGT 070204M FN AM3 .015" ● ●DCGT 21.51 FN AM3 DCGT 070204 FN AM3 .016" ● ●DCGT 32.501 FN AM3 DCGT 11T300 FN AM3 3/8" .001" ○ ● ●DCGT 32.504M FN AM3 DCGT 11T301M FN AM3 .003" ● ● ●DCGT 32.504 FN AM3 DCGT 11T301 FN AM3 .004" ●DCGT 32.508M FN AM3 DCGT 11T302M FN AM3 .007" ● ● ●DCGT 32.508 FN AM3 DCGT 11T302 FN AM3 .008" ○ ● ●DCGT 32.51M FN AM3 DCGT 11T304M FN AM3 .015" ● ● ●DCGT 32.51 FN AM3 DCGT 11T304 FN AM3 .016" ● ●DCGT 32.52 FN AM3 DCGT 11T308 FN AM3 .031" ● ●

DCGT-S Item Number ISO Item Number IC Radius VM1 QM3 TAS ZM3 TM4 C7X


DCGT 21.501 RS DCGT 070200 RS 1/4" .001" ○ ● ●DCGT 21.504 RS DCGT 070201 RS .004" ● ● ○DCGT 21.508 RS DCGT 070202 RS .008" ● ●DCGT 21.51 RS DCGT 070204 RS .016" ○ ●DCGT 32.501 RS DCGT 11T300 RS 3/8" .001" ○ ● ● ● ●DCGT 32.504M RS DCGT 11T301M RS .003" ● ● ●DCGT 32.504 RS DCGT 11T301 RS .004" ○ ● ○DCGT 32.508 RS DCGT 11T302 RS .008" ○ ● ●DCGT 32.51 RS DCGT 11T304 RS .016" ●

Left-handGround Chipbreaker

DCGT 21.501 LS DCGT 070200 LS 1/4" .001" ○ ○DCGT 21.504 LS DCGT 070201 LS .004" ○ ○ ○DCGT 21.508 LS DCGT 070202 LS .008" ○ ○DCGT 32.501 LS DCGT 11T300 LS 3/8" .001" ○DCGT 32.504 LS DCGT 11T301 LS .004" ○ ○DCGT 32.508 LS DCGT 11T302 LS .008" ○

DCGT-U Item Number ISO Item Number IC Radius VM1 QM3 TAS ZM3 C7X

Ground Chipbreaker （Right-hand）

DCGT 21.501 RU DCGT 070200 RU 1/4" .001" ●DCGT 21.504 RU DCGT 070201 RU .004" ●DCGT 21.508 RU DCGT 070202 RU .008" ●DCGT 32.504 RU1 DCGT 11T301 RU1 3/8" .004" ●DCGT 32.508 RU1 DCGT 11T302 RU1 .008" ●

DCMW Item Number ISO Item Number IC Radius PD1


DCMW 32.504 DCMT 11T301 3/8" .004" ○DCMW 32.508 DCMT 11T302 .008" ○DCMW 32.51 DCMT 11T304 .016" ○DCMW 32.52 DCMT 11T308 .031" ○

TFD Item Number ISO Item Number IC Radius VM1 QM3 TAS ZM3 C7X

With wiper

TFD 07FR05 TFD 07FR05 1/4" .002" ● ○TFD 07FR15 TFD 07FR15 .006" ● ○TFD 11FR05 TFD 11FR05 3/8" .002" ● ○TFD 11FR15 TFD 11FR15 .006" ● ○

DCGT-AZ7 Item Number ISO Item Number IC Radius VM1 QM3 TAS TM4

Molded Chipbreaker

DCGT 32.501 FN AZ7 DCGT 11T300 FN AZ7 3/8" .001" ● ● ○DCGT 32.504M FN AZ7 DCGT 11T301M FN AZ7 .003" ● ● ○DCGT 32.508M FN AZ7 DCGT 11T302M FN AZ7 .007" ● ● ○DCGT 32.51M FN AZ7 DCGT 11T304M FN AZ7 .015" ● ● ○DCGT 32.52 FN AZ7 DCGT 11T308 FN AZ7 .031" ○ ○

Thickness of insert Inch MetricDC..21.5.., TFD07.. 3/32" 2.38DC..32.5.., TFD11.. 5/32" 3.97

NTK TFD-type is an insert with a wiper facet.It has a 0.3㎜ (.012")flat at cutting edge when set on the toolholder.The flat at cutting edge ensures superior surface finish at increased feed rate.Note: TFD type can be set on toolholders of SDJC-N,　　　 SDJC-N-F, SDJC, CH-SDUC, Y-SDJC and Y-SDJC-OH.

*** PD1 is PCD diamond tipped grade for aluminum and non-ferrous materials.

◆Features of TFD-type

.012"（0.3㎜）

Nose Radius

●Stock　　○1-2 week deliverySee page 129 for order code.

Gene

ral /

Fro

nt T

urnin

g

27

Tool Holders for DC.. / TFD Inserts

■SDJC

■SDNCN

A A93°

32°

.472(120)

62°30′


(Inch, Metric)

Gage Insert Item number Clamp screw WrenchRight-hand Left-hand

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock Stock Order Code

DC..21.5.. TFD07..

SDJCR/L-062C 3/8" 3/8" 3/8" 0.0 LRIS-2.5 × 7 CLR-15S 5567722 ● ● 5567748

SDJCR/L-082C 1/2" 1/2" 1/2" 0.0 LRIS-2.5 × 7 CLR-15S 5307319 ● ● 5307285

DC..32.5.. TFD11..

SDJCR/L-083C 1/2" 1/2" 1/2" 0.0 LRIS-4 × 10 LLR-25S 5567730 ● ● 5567755

SDJCR/L-103C 5/8" 5/8" 5/8" 0.0 LRIS-4 × 10 LLR-25S 5574223 ● ● 5574231

DC..21.5.. TFD07.. SDJCR/L0808X07N .315 8 .315 8 .315 8 0.0 LRIS-2.5 × 7 CLR-15S 5137047 ● ○ 5137864

DC..32.5.. TFD11..

SDJCR/L1212X11N .472 12 .472 12 .472 12 0.0 LRIS-4 × 10 LLR-25S 5122163 ○ ○ 5137849

SDJCR/L1616X11N .630 16 .630 16 .630 16 0.0 LRIS-4 × 10 LLR-25S 5180583 ○ ○ 5180609

(Inch, Metric)

Gage Insert Item number Clamp screw Wrench Order Code Stock(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜)

DC..21.5..SDNCN-062 3/8" 3/8" 2.5 63.5 3/8" 3/16" LRIS-2.5 × 7 CLR-15S 5580352 ●

SDNCN-082 1/2" 1/2" 3.5 88.9 1/2" 1/4" LRIS-2.5 × 7 CLR-15S 5330048 ●

DC..32.5..SDNCN-083 1/2" 1/2" 3.937 100 1/2" 1/4" LRIS-4 × 10 LLR-25S 5794433 ●

SDNCN-103 5/8" 5/8" 3.937 100 5/8" 5/16" LRIS-4 × 10 LLR-25S 5574819 ●

DC..21.5.. SDNCN08-X07 .315 8 .315 8 .472 120 .315 8 .157 4.0 LRIS-2.5 × 7 CLR-15S 5742184 ○

DC..32.5.. SDNCN12-X11 .472 12 .472 12 .472 120 .472 12 .236 6.0 LRIS-4 × 10 LLR-25S 5742200 ○


Gene

ral /

Fro

nt T

urnin

g

28


■DS-SDUL

■DS-SDXL22-11-006 (Coolant through)

A A

0.0

3°

122°

φ

1/8NPT

0.0

A A

119°

6°

φ20

(Inch, Metric)

Gage Insert Item number φ Clamp screw Wrench Order Code Stock(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜)

DC..21.5..TFD07..

DS-SDUL14F-07 .551 14 .522 13 3.150 80 .236 6.0 LRIS-2.5 × 7 CLR-15S 5348545 ○

DS-SDUL15H-07 5/8" .591 15 3.937 100 .236 6.0 LRIS-2.5 × 7 CLR-15S 5348107 ○

DS-SDUL16F-07 .630 16 .591 15 3.150 80 .236 6.0 LRIS-2.5 × 7 CLR-15S 5520598 ○

DS-SDUL19-07 3/4" .709 18 4.724 120 .236 6.0 LRIS-2.5 × 7 CLR-15S 5278247 ●

DS-SDUL20-07* .787 20 .748 19 4.724* 120 .236 6.0 LRIS-2.5 × 7 CLR-15S 5278239 ●

DS-SDUL22-07 .866 22 .827 21 4.724 120 .236 6.0 LRIS-2.5 × 7 CLR-15S 5330758 ●

DC..32.5..TFD11..***

DS-SDUL19-11 3/4" .709 18 4.724 120 .394 10.0 LRIS-4 × 10 LLR-25S 5278262 ●

DS-SDUL20-11** .787 20 .748 19 4.724** 120 .394 10.0 LRIS-4 × 10 LLR-25S 5278254 ●

DS-SDUL22-11 .866 22 .827 21 4.724 120 .394 10.0 LRIS-4 × 10 LLR-25S 5324025 ●

DS-SDXL22-11-006*** .866 22 .827 21 4.724 120 .472 12.0 LRIS-4 × 10 LLR-25S 5629696 ●

DS-SDUL25-11 1" .945 24 5.906 150 .394 10.0 LRIS-4 × 10 LLR-25S 5317136 ●

* Also available in 95㎜ long (DS-SDUL20X-07 (order code: 5520606), 1-2 week delivery).** Also available in 95㎜ long (DS-SDUL20X-11 (order code: 5520614), 1-2 week delivery).*** TFD11 inserts cannnot be used with DS-SDXL tool holders.

Note: Use right hand or neutral inserts for the DS-SDUL and DS-SDXL bars.


DS Holders for DC.. / TFD inserts

Gene

ral /

Fro

nt T

urnin

g

29

Y-Axis Holders for DC.. / TFD Inserts

■Y-SDJCR

■Y-SDNCN

.787(20)

93°

A

A

A A

90°62°30′

0.0

.827(21)

4.724"(120)

Gang toolingpost

Feed direction

Feed direction

Gang toolingpost

(Inch, Metric)

Gage Insert Item number Clamp screw Wrench Order Code Stock(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜)

DC..21.5..TFD07..

Y-SDJCR062-IN 3/8" 3/8" 4.724 120 .984 25 LRIS-2.5×7 CLR-15S 5573662 ●


DC..32.5..TFD11..

Y-SDJCR083-IN 1/2" 1/2" 4.724 120 .984 25 LRIS-4×10 LLR-25S 5782784 ●

Y-SDJCR103-IN 5/8" 5/8" 4.724 120 .984 25 LRIS-4×10 LLR-25S 5573688 ●DC..21.5..TFD07.. Y-SDJCR12-07L .472 12 .472 12 4.724 120 1.181 30 LRIS-2.5×7 CLR-15S 5371679 ○

DC..32.5..TFD11.. Y-SDJCR12-11L .472 12 .630 16 4.724 120 1.181 30 LRIS-4×10 LLR-25S 5377759 ●

(Inch, Metric)


DC..32.5.. Y-SDNCN083-IN 1/2" 1/2" 1/4" 6.35 .984 25 LRIS-4×10 LLR-25S 5818885 ●

DC..32.5..Y-SDNCN12-11S .472 12 .472 12 .236 6.0 .787 20 LRIS-4×10 LLR-25S 5479191 ○

Y-SDNCN16-11L .630 16 .630 16 .315 8.0 1.181 30 LRIS-4×10 LLR-25S 5374921 ○

Note: Y-SDJCR holders do not work with left-hand inserts (such as DCGT-LS).


Gene

ral /

Fro

nt T

urnin

g

30


35-deg Diamond ("VC" Style)Insert Grade

VCGT-AM3 Item Number ISO Item Number IC Radius VM1 QM3 TAS ZM3

Molded Chipbreaker

VCGT 2201 FN AM3 VCGT 110300 FN AM3 1/4" .001" ● ● ●VCGT 2204M FN AM3 VCGT 110301M FN AM3 .003" ●VCGT 2204 FN AM3 VCGT 110301 FN AM3 .004" ● ●VCGT 2208M FN AM3 VCGT 110302M FN AM3 .007" ●VCGT 2208 FN AM3 VCGT 110302 FN AM3 .008" ● ●VCGT 221M FN AM3 VCGT 110304M FN AM3 .015" ●

VCGT-U Item Number ISO Item Number IC Radius VM1 QM3 TAS ZM3


VCGT 2201 RU VCGT 110300 RU 1/4" .001" ● ●VCET＊ 2204M RU VCET 110301M RU .003" ○ （* Tighter Tolerance)VCGT 2204M RU VCGT 110301M RU .003" ●VCGT 2204 RU VCGT 110301 RU .004" ● ●VCGT 2208M RU VCGT 110302M RU .007" ●VCGT 2208 RU VCGT 110302 RU .008" ● ●

VCGT-AZ7 Item Number ISO Item Number IC Radius VM1 QM3 TAS ZM3

Molded Chipbreaker

VCGT 2201 FN AZ7 VCGT 110300 FN AM3 1/4'' .001" ●VCGT 2204M FN AZ7 VCGT 110301M FN AM3 .003" ●VCGT 2208M FN AZ7 VCGT 110302M FN AM3 .007" ●VCGT 221M FN AZ7 VCGT 110304M FN AM3 .015" ● ●

VCMW Item Number ISO Item Number IC Radius PD1


VCMW 2204 VCMW 110301 1/4" .004" ○VCMW 2208 VCMW 110302 .008" ○VCMW 221 VCMW 110304 .016" ○

TFV Item Number ISO Item Number IC Radius VM1 QM3 TAS ZM3

with wiper flat

TFV 11FR05SX TFV 11FR05SX 1/4" .002" ● ○TFV 11FR05U TFV 11FR05U .002" ○ ○TFV 11FR10SX TFV 11FR10SX .004" ● ○TFV 11FR10U TFV 11FR10U .004" ○ ○

VCGW Item Number ISO Item Number IC Radius KM1

Flat top, Polished

VCGW 2201 H VCGW 110300 H 1/4" .001" ○VCGW 2204 H VCGW 110301 H .004" ○VCGW 2208 H VCGW 110302 H .008" ○

◆Features of TFV-type

Nose Radius

.008"（0.2㎜）

**KM1 is an uncoated carbide grade. All inserts with "H" come with polished edge to minimize chip welding, especially for cutting aluminum and plastics.

NTK TFV-type is an insert with a wiper facet.It has 0.2㎜ (.008")flat on cutting edge when set on the toolholder.The flat at cutting edge ensures superior surface finish at increased feed rate.Note: TFD type can be set on toolholders of SVAC-N

Thickness of insert Inch MetricVC..22.., TFV11.. 1/8" 3.18 ●Stock　　○1-2 week delivery

See page 129 for order code.

Note: SX chipbreaker is chipbreaker with land at edge.

Gene

ral /

Fro

nt T

urnin

g

31

Tool Holders for VC.. / TFV

■SVAC-N

■SVVCR-N

■SVJC-N

■DS-SVXL

(Inch, Metric)GageInsert Item Number Clamp Screw Wrench Right-hand Left-hand

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock Stock Order Code

VC..22SVJCR/L-062C 3/8 3/8 3/8 －－ LRIS-2.5×7 CLR-15S 5574066 ● ● 5574090SVJCR/L-082C 1/2 1/2 1/2 －－ LRIS-2.5×7 CLR-15S 5574074 ● ● 5574108SVJCR/L-102C 5/8 5/8 5/8 －－ LRIS-2.5×7 CLR-15S 5574082 ● ● 5574116

VC..22 SVJCR/L1212X11N .472 12 .472 12 .472 12 －－ LRIS-2.5×7 CLR-15S 5339932 ○ ○ 5517768SVJCR/L1616X11N .630 16 .630 16 .630 16 －－ LRIS-2.5×7 CLR-15S 5339924 ○ ○ 5517743

VC..22/TFV11.. SVACR/L0808X11N .315 8 .315 8 .315 8 －－ LRIS-2.5×7 CLR-15S 5637517 ● ● 5780465SVACR/L1212X11N .472 12 .472 12 .472 12 －－ LRIS-2.5×7 CLR-15S 5304050 ○ ○ 5304076

VC..22 SVVCR1212X11N .472 12 .472 12 .472 12 .197 5 LRIS-2.5×7 CLR-15S 5523238 ○ - -SVVCR1616X11N .630 16 .630 16 .630 16 .197 5 LRIS-2.5×7 CLR-15S 5523212 ○ - -

(Inch, Metric)GageInsert Item Number φ Clamp Screw Wrench Order Code Stock(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜)

VC..22

DS-SVXL15H-11 5/8 .591 15 3.937 100 .394 10 LRIS-2.5×7 CLR-15S 5418413 ○DS-SVXL19-11 3/4 .709 18 4.724 120 .394 10 LRIS-2.5×7 CLR-15S 5393756 ●DS-SVXL20-11 .787 20 .748 19 4.724 120 .394 10 LRIS-2.5×7 CLR-15S 5393764 ●DS-SVXL22-11 .866 22 .827 21 4.724 120 .394 10 LRIS-2.5×7 CLR-15S 5486675 ●DS-SVXL25-11 1 .945 24 5.906 150 .394 10 LRIS-2.5×7 CLR-15S 5486683 ●

A A

52°93°

4.274（120）

0.0

A A91°

54°

4.274（120）

0.0

72°30′

4.724（120）

A A

99°

0.0

55°

φ




Left-Hand style shown

Use right-hand or neutral inserts for DS-SVXL bars.


Please see page 113 for Y-axis tool holders.

Gene

ral /

Fro

nt T

urnin

g

32


Tool Holders for VP..

■SVXP-N

■DS-SVVPN

A A

46°

99°

4.724（120）

0.0

(Metric ㎜ )GageInsert Item Number Clamp Screw Wrench Right-hand Left-hand


VP..22..SVXPR/L1012X11N .394 10 .394 10 .472 12 LRIS-2.5×7 CLR-15S 5511506 ● ○ 5511514SVXPR/L1212X11N .472 12 .472 12 .472 12 LRIS-2.5×7 CLR-15S 5511522 ● ○ 5511548

(Inch, Metric)GageInsert Item Number φ Clamp Screw Wrench Order Code Stock(Inch) (㎜) (Inch) (㎜) (Inch) (㎜)

VP..22..DS-SVVPN19-11 3/4 .709 18 4.724 120 LRIS-2.5×7 CLR-15S 5511555 ○DS-SVVPN22-11 .866 22 .827 21 4.724 120 LRIS-2.5×7 CLR-15S 5511563 ○


35°

0.0

A A72°30’

1.063（27） φ

Nose radius QM3 TASItem Number ISO Item Number (Inch) (㎜) Order Code Stock Order Code Stock

VPGT 2201 FN AM3 VPGT 110300M FN AM3 .001 0.03 - - 5511795 ○VPGT 2204M FN AM3 VPGT 110301M FN AM3 .003 0.08 5562756 ● 5511803 ○VPGT 2208M FN AM3 VPGT 110302M FN AM3 .007 0.18 5562749 ● - -

General Turning Inserts　35-deg diamond with 11 deg. relief ("VP" Style)

Insert Geometry IC ThicknessVPGT22.. 1/4" 6.35㎜ 1/8" 3.175㎜


Gene

ral /

Fro

nt T

urnin

g

33

Tool Holders for TC..

■STAC-N

(Metric ㎜ )GageInsert Item Number Clamp Screw Wrench Right-hand Left-hand


TC..73..STACR/L0808X09N .315 8 .315 8 .315 8 LRIS-2.2×6 CLR-13S 5137005 ○ ○ 5137831

STACR/L1010X09N .394 10 .394 10 .394 10 LRIS-2.2×6 CLR-13S 5137096 ○ ○ 5137948

TC..21.5.. STACR/L1212X11N .472 12 .472 12 .472 12 LRIS-2.5×7 CLR-15S 5119078 ○ ○ 5137930


General Turning Inserts　60-deg triangle with 7 deg. relief ("TC" Style)

Insert Geometry IC ThicknessTC..73.. 7/32" 5.56㎜ 3/32" 2.38㎜TC..21.5.. 1/4" 6.35㎜ 3/32" 2.38㎜

91°

A A

4.724（120）

0.0


Nose radius ZM3 VM1Item Number ISO Item Number (Inch) (㎜) Order Code Stock Order Code Stock

TCGT 7304 RS TCGT 090201 RS .004 0.1 5020755 ● 5264585 ○

TCGT 7308 RS TCGT 090202 RS .008 0.2 5102819 ● - -

TCGT 21.504 RS TCGT 110201 RS .004 0.1 5983671 ● 5264593 ○

Non chipbreaker

TCGW 7301 FN TCGW 090200 FN .001 0.03 5132006 ○ - -

TCGW 7304 FN TCGW 090201 FN .004 0.1 5131990 ○ - -

TCGW 21.501 FN TCGW 110200 FN .001 0.03 5131982 ○ - -

TCGW 21.504 FN TCGW 110201 FN .004 0.1 5131974 ○ - -

TCGT-S

TCGW

Gene

ral /

Fro

nt T

urnin

g

34


General Turning Inserts (Negative)　60-deg Triangle ("TN" Style)

Insert Geometry IC ThicknessTN..33.. 3/8" 9.525㎜ 3/16" 4.76㎜

Tool Holders for TN..

■PTXN-N - Pin lock type

Right-Hand style shown.689(17.5)

(20)

.787

0.0

.709(18)

4.724(120)

AA6°

6° 100°

100°

(Metric ㎜ )Gage Insert Item number Clamp Pin Clamp Screw Wrench Right-Hand

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock

TN..33..

PTXNR1016X33N .394 10 .630 16 .394 10 .079 2 LCL33N LCS33 LW-2 5479860 ○PTXNR1216X33N .472 12 .630 16 .472 12 0 0 LCL33N LCS33 LW-2 5479852 ○PTXNR1616X33N .630 16 .630 16 .630 16 0 0 LCL33N LCS33 LW-2 5489901 ○PTXNR2020X33N .787 20 .787 20 .787 20 0 0 LCL33N LCS33 LW-2 5513965 ○


Note: Max Depth of Cut is .157"(4.0㎜)

Item number ISO number ZM3 QM3 TM4(Inch) (㎜) Order Code Stock Order Code Stock Order Code Stock

TNGG-UL TNGG 3304M FN UL TNGG 160401M FN UL .004 0.1 5809934 ●TNGG 3308M FN UL TNGG 160402M FN UL .008 0.2 5809983 ●TNGG 331M FN UL TNGG 160404M FN UL .016 0.4 5809975 ●

TNGG-ZP TNGG 3308 FN ZP TNGG 160402 FN ZP .008 0.2 5290382 ○ 5290374 ○TNGG 331 FN ZP TNGG 160404 FN ZP .016 0.4 5205000 ● 5205018 ●TNGG 332 FR ZP TNGG 160408 FN ZP .031 0.8 5205026 ● 5205034 ●

TNGG-U2 TNGG 3304 FR U2 TNGG 160401 FR U2 .004 0.1 5225875 ●

Ground Chipbreaker

TNGG 3308 FR U2 TNGG 160402 FR U2 .008 0.2 5020995 ●TNGG 3308 FL U2 TNGG 160402 FL U2 .008 0.2 5064241 ○TNGG 331 FR U2 TNGG 160404 FR U2 .016 0.4 5851159 ●TNGG 331 FL U2 TNGG 160404 FL U2 .016 0.4 5024575 ○TNGG 332 FR U2 TNGG 160408 FR U2 .031 0.8 5059225 ○TNGG 332 FL U2 TNGG 160408 FL U2 .031 0.8 5065594 ○

TNGG-C

TNGG 3308 FR C TNGG 160402 FR C .008 0.2 5969324 ○Ground

Chipbreaker

TNGG-DA

TNGG 3304 FR DA TNGG 160401 FR DA .004 0.1 5439500 ○Ground

Chipbreaker

Gene

ral /

Fro

nt T

urnin

g

35

Tool Holders for CN..

General Turning Inserts (Negative)　80-deg Diamond ("CN" style)

■PCLN - Pin lock type


(Metric ㎜ )Gage Insert Item number Shim Clapm

PinClamp Screw Spring Wrench

Right-Hand(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock

CN..43.. PCLNR1620X43N .630 16 .630 16 .787 20 4.724 120 LSC42 LCL4 LCS 4CA LSP4 LW-3 5259056 ○

Item number ISO numberI.C T QM3 ZM3

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock Order Code Stock

CNGG431FN(ZP) CNGG120404ZP 1/2" 12.7 3/16" 4.76 .016 0.4 5157961 ● 5157953 ○

CNGG432FN(ZP) CNGG120408ZP 1/2" 12.7 3/16" 4.76 .031 0.8 5157979 ● 5161161 ○

Structure of pin lock type tool holder

See below for the explanation of the spare parts.

PTGN type tool holder with offset shown.

95°

95°

６°

６°

.984（25)

95°

Clamp Screw

Insert

Spring

Shim

Clamp PinClamp PinGe

nera

l / F

ront

Tur

ning

36


TFT Series

■Tool Holders

■Inserts

3°

6°.591(15)

4.724(120)

A A


Itemnumber

ZM3(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock

TF3300R 3/8" 9.525 3/16" 4.76 0 0 5947338 ●

TF3305R 3/8" 9.525 3/16" 4.76 .002 0.05 5914619 ●

TF3315R 3/8" 9.525 3/16" 4.76 .006 0.15 5906342 ●

TF3320R 3/8" 9.525 3/16" 4.76 .008 0.2 5971874 ○

※Maximum depth of cut : .157" (4㎜)

.020 (0.5)

32°

(Inch, Metric)Gage Insert Item number Clamp screw Wrench Order Code Stock

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜)

TF33..TFTR06-IN 3/8" 3/8" 3/8" 0.0 0 .118 3 LR-S-4×10PW CLR-15S 5567813 ●

TFTR08-IN 1/2" 1/2" 1/2" 0.0 0 .039 1 LR-S-4×10PW CLR-15S 5567821 ●

TF33..

TFTR10 .394 10 .394 10 .394 10 0.0 0 .118 3 LR-S-4×10PW CLR-15S 5196993 ○

TFTR12 .472 12 .472 12 .472 12 0.0 0 .039 1 LR-S-4×10PW CLR-15S 5197025 ○

TFTR16 .630 16 .630 16 .630 16 0.0 0 0.0 0 LR-S-4×10PW CLR-15S 5205190 ○


Note: Max Depth of Cut is .157"(4.0㎜)

Screw accessible from both side

Gene

ral /

Fro

nt T

urnin

g

37

CSV Series - Inserts

Tool Holders for right-hand inserts CSVR.., DS-CSVL..Tool Holders for left-hand inserts CSVL..

All CSV series inserts have polished cutting edges.

Note: All angles shown are obtained when insert is set on the holder. All images in this page show right-hand inserts.

● Stock ○ 1-2 week delivery

■CSVF - Front Turning

Item number Chip-breaker

Max Depth of Cut Edge geometry（α×β°） VM1(Inch) (㎜) (Inch) (㎜) Order Code R L Order Code

CSVF11FR/LV-M No ― ― .006×2° 0.15×2° 5386248 ● ● 5386255CSVF11FR/LVB-M Yes .118 3.00 .006×2° 0.15×2° 5386263 ● ● 5386271

1/4"

6.35

β°

30°

α

0.0

1/4"

6.35

CSV Series - Tool Holders

■CSVR/L ■CSVR/L-NC

■DS-CSVL (Takes right-hand inserts)

AA .787（20）

.004

（0.1）

１°

AA １°

.787（20）

.004

（0.1）

AA

.787（20）

0.0

１°

φ


CSVR/L-NC (Inch)Gage Insert Item number Clamp

screw WrenchRight-hand Left-hand

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock Stock Order Code

CSV..11.. CSVR/L06-IN-NC 3/8" 3/8" 4.724 120 3/8" 0.0 LRIS-2.5×7 CLR-15S 5573159 ● ● 5573175CSVR/L08-IN-NC 1/2" 1/2" 4.724 120 1/2" 0.0 LRIS-2.5×7 CLR-15S 5573142 ● ● 5573167

CSVR/L (Metric, ㎜)Gage Insert Item number Clamp



CSV..11..

CSVR/L07 .295 7 .295 7 5.512 140 .295 7 .020 0.5 LRIS-2.5×7 CLR-15S 5303169 ● ● 5303193CSVR/L08 .315 8 .315 8 5.512 140 .315 8 0.0 LRIS-2.5×7 CLR-15S 5303151 ● ● 5303201CSVR/L10 .394 10 .394 10 5.512 140 .394 10 0.0 LRIS-2.5×7 CLR-15S 5303144 ● ● 5303177CSVR/L12 .472 12 .472 12 5.512 140 .472 12 0.0 LRIS-2.5×7 CLR-15S 5327929 ●

DS-CSVL (Inch)Gage Insert Item number φ Clamp screw Wrench Order Code Stock

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜)CSV..11FR.. DS-CSVL15 5/8" .591 15 4.724 120 .394 10 LRIS-2.5×7 CLR-15S 5572664 ●

Gene

ral /

Fro

nt T

urnin

g

39

Back Turning

Back

Tur

ning

40

Back Turning

TBMH (GTT Holder)

➡Page 47

a　.051" Max.b　.106"

Y-axis Holder available.➡Page 114

TBMH32..3-corner rigid design.

CH-GTT

➡Contact NTK for detail

a　.051" Max.b　.106"TBMH32..

DS-GTT

➡Page 121

a　.051" Max.b　.106"TBMH32..

TBP DS-TBP TBPA (CTPA Holder)

➡Page 42 ➡Page 44 ➡Page 43

a　.189" Max. a　.189" Max. a　.248" Max.b　.209" b　.209" b　.209"/.268"

Y-axis Holder available.➡Page 113

TBP..FR/L TBP..FR TBPA..FR/L

a: Length of Bladeb: Max Depth of Cut

ｂａ

NTK Back Turning Tools - Product Lines

TBVC TB CSV


a　.327" Max. a　.158" Max. a　.039" Max.b　.327" b　.189"/.347" b　.087"TBVC11.. TB..R/L CSVB11..

For much heavier depth of cut. 3-corner rigid design. For micro machining.

Back

Tur

ning

41

■ When depth of cut is not large enough. ■ When having rough finish on shoulder.

Back turning can be performed multiple times until the total depth of cut reaches b.

Turning shoulder twice can improve the finish.

■ Undercut

Assume undercut exists on back turning section. TBMH style inserts should be used to cut the undercut.

TBMH32 ➡Page 47

GTTR ➡Page 47

DS-GTTL ➡Page 66

■ Finish cut

TBPタイプ TBVCR･･F10

Cutting edge is located away from the guide bushing. Roughing can be performed without retracting roughed part to guide bushing.

➡Page 45

Back

Tur

ning

42

Back Turning

TBP Series

■Tool holders

.008(0.2)

.028(0.7)

15°

〈FRV-P, PD1〉

Item number HolderType

Chip-breaker

QM3 ZM3 TAS VM1 PD1(Inch) (㎜) (Inch) (㎜) Order Code R Order Code R Order Code R Order Code R Order Code R

TBP55FR00

TBPR..Y-TBPR..DS-TBPL..

Yes55° 0.0 0 .118 3.0 5090378 ● 5270855 ○

TBP55FR10 55° .004 0.1 .118 3.0 5090352 ● 5294301 ○TBP60FR00

Yes60° 0.0 0 .145 3.7 5494711 ● 5090410 ● 5488168 ● 5275508 ●

TBP60FR10M 60° .003 0.08 .145 3.7 5486946 ● 5488176 ● 5476403 ●TBP60FR10 60° .004 0.1 .145 3.7 5362488 ● 5090402 ● 5269949 ●TBP60FRV*

No60° 0.0 0 .189 4.8 5345715 ● 5264940 ○

TBP60FRV05* 60° .002 0.05 .189 4.8 5440680 ○TBP60FRV10* 60° .004 0.1 .189 4.8 5482690 ● 5440698 ○TBP60FRV00-P

No60° 0.0 0 .157 4.0 5781745 ●

TBP60FRV10-P 60° .004 0.1 .157 4.0 5785118 ●

3°

.591(15)

4.724(120)

.217(5.5)

.138(3.5)

Max. machining depth

15°

.787（20.0）

.315(8.0)

.098(2.5)

.020(0.5)

50°

Max. machining depth

15°

.787（20.0）

.315(8.0)

.098(2.5)

.020(0.5)

50° 15°.028（0.7）

.008

（0.2）

15°

.208(5.3)

With Chipbreaker Without Chipbreaker

θshows the angle when the holder is set.

Polished




Right-hand(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock

TBP..FR..

TBPR06-IN 3/8" 3/8" 3/8" .079 2 LRIS-4×10PW CLR-15S 5487384 ●TBPR08-IN 1/2" 1/2" 1/2" 0.0 0 LRIS-4×12PW CLR-15S 5565817 ●TBPR10-IN 5/8" 5/8" 5/8" 0.0 0 LRIS-4×12PW CLR-15S 5574827 ●TBPR08 .310 8 .390 10 .310 8 .016 4 LRIS-4×10PW CLR-15S 5133285 ●TBPR12 .470 12 .470 12 .470 12 0.0 0 LRIS-4×12PW CLR-15S 5090451 ●TBPR16 .700 16 .700 16 .700 16 0.0 0 LRIS-4×12PW CLR-15S 5270822 ○

■InsertsMax. Total Depth of Cut .208" (5.3㎜) (Caution: Each pass should not exceed L)

Screw Accessible from both side


〈FRV〉

* "V" and "P" denote polished cutting edge except for PD1 inserts.

Back

Tur

ning

43

TBPA Series

■Tool holders


Chip-breaker

QM3 ZM3 TAS VM1(Inch) (㎜) (Inch) (㎜) Order Code R Order Code R Order Code R Order Code R

TBPA60FRVB*

CTPAR..Y-CTPAR..

Yes 60° 0.0 0 .177 4.5 5344833 ● 5488184 ○ 5439344 ●

TBPA60FR10M Yes 60° .003 0.08 .177 4.5 5486956 ●

TBPA60FRPB10M* Yes 60° .003 0.08 .177 4.5 5488192 ○ 5476395 ○

TBPA60FRPB10* Yes 60° .004 0.1 .177 4.5 5344858 ● 5379151 ●

TBPA60FRPB20M* Yes 60° .007 0.18 .177 4.5 5509807 ●

A A.984(25.0)

.700(16)

１°

.295(7.5)

0.0

4.724(120)

.768(19.5)

.028(0.7)

.008

（0.2）

15°

60°

.208(5.5)

With Chipbreaker

15°

Max. machiningdepth

θshows the angle when the holder is set.



* "V" and "P" denote polished cutting edge.Note: Left-hand inserts are also available in certain geometries. Contact NTK for more detail.

Note: Left-hand tool holders are also available in certain geometries. Contact NTK for more detail.


Right-hand(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock

TBPA..FR..（Back turning）

CTPA..FR..（Cut-off）

CTPAR06-IN 3/8" 3/8" 3/8" 0.0 0 LRIS-4×10PW CLR-15S 5573118 ●CTPAR08-IN 1/2" 1/2" 1/2" 0.0 0 LRIS-4×12PW CLR-15S 5573100 ●CTPAR10-IN 5/8" 5/8" 5/8" 0.0 0 LRIS-4×12PW CLR-15S 5574835 ●CTPAR12 .470 12 .470 12 .470 12 0.0 0 LRIS-4×12PW CLR-15S 5199195 ●CTPAR16 .700 16 .700 16 .700 16 0.0 0 LRIS-4×12PW CLR-15S 5199203 ○

.014(3.5)

.984(25.0)

.370

(9.40)

45°

■InsertsMax. Total Depth of Cut .208" (5.3㎜) (Caution: Each pass should not exceed L)



Back

Tur

ning

44

Back Turning■Y-TBPR

■Y-CTPAR

■DS-TBP

3°

.138（3.5） 4.724(120)

2°

0.0

.787(20)

1°

.134(3.4) .787(120)

2°

0.0

.984(25)

Feed direcition

Gang tooling post


Note: Use right-hand inserts for Y-TBPR and Y-CTPAR holders.(Inch, Metric)

GageInsert Item number Clamp screw Wrench Order Code Stock

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜)

TBP..FR..

Y-TBPR06-IN 3/8" 3/8" .984 25 LRIS-4×10PW CLR-15S 5573647 ●Y-TBPR08-IN 1/2" 1/2" .984 25 LRIS-4×12PW CLR-15S 5573654 ●Y-TBPR10-IN 5/8" 5/8" .984 25 LRIS-4×12PW CLR-15S 5574801 ●Y-TBPR12 .472 12 .472 12 .984 25 LRIS-4×12PW CLR-15S 5358478 ○

(Inch, Metric)GageInsert Item number

φClamp screw Wrench Order Code Stock


TBP..FR..DS-TBPL19 3/4" .709 18 4.724 120 .433 11 LRIS-4×10 LLR-25S 5540414 ●DS-TBPL20 .787 20 .748 19 4.724 120 .433 11 LRIS-4×10 LLR-25S 5540422 ○DS-TBPL25 1" .945 24 5.906 150 .512 13 LRIS-4×10 LLR-25S 5540430 ●

(Inch)GageInsert Item number Clamp screw Wrench Order Code Stock

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜)TBPA..FR.. Y-CTPAR08L-IN 1/2" 1/2" 1.181 30 LRIS-4×12PW CLR-15S 5792775 ●

3°

0.0

.138(3.5)

.217(5.5)

.591(15) φ





Back

Tur

ning

45

TBVC Series■Inserts


U

S

.020(0.5)

35°


ZM3 VM1(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock Order Code Stock

TBVC11FR05U TBVCR.. 1/4" 6.35 1/8" 3.18 .002 0.05 5204870 ●

TBVC11FR10U TBVCR.. 1/4" 6.35 1/8" 3.18 .004 0.10 5204888 ● 5341763 ●

TBVC11FR10S TBVCR.. 1/4" 6.35 1/8" 3.18 .004 0.10 5433107 ●


(Inch, Metric)GageInsert Item number Clamp screw Wrench Order Code Stock


TBVC11VCGT22..

TBVCR08-F10-IN 1/2" 1/2" 4.724 120 1/2" .394 10 LRIS-2.5×7 CLR-15S 5488911 ●TBVCR12-F10 .472 12 .472 12 4.724 120 .472 12 .394 10 LRIS-2.5×7 CLR-15S 5344262 ●TBVCR16-F10 .630 16 .630 16 4.724 120 .630 16 .394 10 LRIS-2.5×7 CLR-15S 5344270 ●


■Tool HoldersMax. Depth of Cut .335" (8.5㎜) Screw-on type, 35° Rhombic positive type

Note: VCGT22.. inserts can be used with TBVCR holders.

53°

2°

.335"（8.5）

Back

Tur

ning

46

Back Turning

Gage Insert Item number Clamp Clamp

screw Spring WrenchRight-hand

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock

TB43 TBR16N .630 16 .630 16 .354 9 .630 16 3.071 78 .354 9 .394 10 CPR5S AOS-5×25 ASG-5 LW-2.5 5504550 ●TBR20N .787 20 .787 20 .197 5 .787 20 3.937 100 .354 9 .394 10 CPR5S AOS-5×25 ASG-5 LW-2.5 5553540 ○

TB Series

Tool Holders for TB32/43 Inserts

■TB32,TB43 Inserts

■TBT ■TB-N

Max Depth of CutItem number Holder

TypeZM3 XT3

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code R Order Code R.106 2.7 TB3200R

TBTR..

0.0 .098 2.5 .020 0.5 3/8" 9.525 1/8" 3.18 5810544 ●.106 2.7 TB3205R .002 0.05 .098 2.5 .020 0.5 3/8" 9.525 1/8" 3.18 5810536 ● 5505110 ●.106 2.7 TB3210R .004 0.10 .098 2.5 .020 0.5 3/8" 9.525 1/8" 3.18.106 2.7 TB3215R .006 0.15 .098 2.5 .020 0.5 3/8" 9.525 1/8" 3.18 5810528 ● 5504519 ●.157 4.0 TB4300R

TBR..

0.0 .138 3.5 .040 1.0 1/2" 12.7 3/16" 4.76.157 4.0 TB4305R .002 0.05 .138 3.5 .040 1.0 1/2" 12.7 3/16" 4.76 5810502 ● 5505060 ●.157 4.0 TB4315R .006 0.15 .138 3.5 .040 1.0 1/2" 12.7 3/16" 4.76 5756614 ● 5503719 ●.153 3.9 TB4340R .016 0.40 .138 3.5 .040 1.0 1/2" 12.7 3/16" 4.76 5796412 ● 5503701 ●

(Inch, Metric)Gage Insert Item number Clamp screw Wrench

Right-hand(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock

TB32 TBTR06-IN 3/8" 3/8" .118 3 3/8" 4.724 120 LR-S-4×10PW CLR-15S 5567789 ●TBTR08-IN 1/2" 1/2" .039 1 1/2" 4.724 120 LR-S-4×10PW CLR-15S 5196506 ●

TB32 TBTR08K .315 8 .315 8 .197 5 .315 8 4.724 120 LR-S-4×10PW CLR-15S 5107578 ○TBTR12K .472 12 .472 12 .039 1 .472 12 4.724 120 LR-S-4×10PW CLR-15S 5107537 ○

Note: θ shows the angle when the insert is set on the holder.


Screw accessible from both sides


2°

6°

.197(5)

.157 (4)

.591(15)

.984(25)

2°6°

d sd sd s w

45°

Back

Tur

ning

47

1/8”(3.18)3/8”（9.525）

3.18

TBMH Inserts

Note: Dimensions shown here are when the inserts is in the holder.

Note: Modification is required to groove deeper than L1.

See page 66 for Y-GTTR and DS-GTTL holders.




ZM3(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code R

TBMH32100R05-22GTTR..

Y-GTTR..DS-GTTL..

.039 1.0 22° .002 0.05 .070 1.8 .012 0.3 5395199 ○TBMH32100R05-45 .039 1.0 45° .002 0.05 .070 1.8 .035 0.9 5395215 ○TBMH32150R05-22 .059 1.5 22° .002 0.05 .106 2.7 .020 0.5 5395207 ●TBMH32150R05-45 .059 1.5 45° .002 0.05 .102 2.6 .051 1.3 5395223 ●

A A

6°

2°

4.724(120)Max groove depth

.591(15)

0.0

(Inch)Gage Insert Item Number

Groove width range ( ) , ClampScrew Wrench

Right-hand Left-hand


TMG32..GTM..32..TBMH32..

GTTR/L06A-IN .012～.118 0.30～3.00 3/8" 3/8" .079 2 .118 3 LR-S-4×10PW CLR-15S 5197421 ● ● 5567615GTTR/L08A-IN .012～.118 0.30～3.00 1/2" 1/2" .079 2 .039 1 LR-S-4×10PW CLR-15S 5197397 ● ● 5567649GTTR/L10A-IN .012～.118 0.30～3.00 5/8" 5/8 .079 2 0 0 LR-S-4×10PW CLR-15S 5579537 ● ● 5579545GTTR/L06B-IN .057～.118 1.45～3.00 3/8" 3/8" .118 3 .118 3 LR-S-4×10PW CLR-15S 5574058 ● ● 5567623GTTR/L08B-IN .057～.118 1.45～3.00 1/2" 1/2" .118 3 .039 1 LR-S-4×10PW CLR-15S 5476262 ● ● 5567656GTTR/L10B-IN .057～.118 1.45～3.00 5/8" 5/8" .118 3 0 0 LR-S-4×10PW CLR-15S 5579552 ● ● 5579560

(Metric, mm)Gage Insert Item Number

Groove width range ( ) , ClampScrew Wrench



TMG32..GTM..32..TBMH32..

GTTR/L08K00 .012～.118 0.30～3.00 .315 8 .315 8 .079 2 .197 5 LR-S-4×10PW CLR-15S 5107206 ● ○ 5107214GTTR/L10K00 .012～.118 0.30～3.00 .394 10 .394 10 .079 2 .118 3 LR-S-4×10PW CLR-15S 5107222 ○ ○ 5107230GTTR/L12K00 .012～.118 0.30～3.00 .472 12 .472 12 .079 2 .039 1 LR-S-4×10PW CLR-15S 5107248 ● ○ 5107255GTTR/L16K00 .012～.118 0.30～3.00 .630 16 .630 16 .079 2 0 LR-S-4×10PW CLR-15S 5173687 ● ○ 5173679GTTR/L10K15 .057～.118 1.45～3.00 .394 10 .394 10 .118 3 .118 3 LR-S-4×10PW CLR-15S 5107263 ○ ○ 5107271GTTR/L12K15 .057～.118 1.45～3.00 .472 12 .472 12 .118 3 .039 1 LR-S-4×10PW CLR-15S 5537246 ○ ○ 5537162GTTR/L16K15 .057～.118 1.45～3.00 .630 16 .630 16 .118 3 0 LR-S-4×10PW CLR-15S 5537287 ● ○ 5537204GTTR/L10K25 .098～.118 2.50～3.00 .394 10 .394 10 .118 3 .118 3 LR-S-4×10PW CLR-15S 5107289 ○ ○ 5107297GTTR/L12K25 .098～.118 2.50～3.00 .472 12 .472 12 .118 3 .039 1 LR-S-4×10PW CLR-15S 5537253 ○ ○ 5537170GTTR/L16K25 .098～.118 2.50～3.00 .630 16 .630 16 .118 3 0 LR-S-4×10PW CLR-15S 5537295 ○ ○ 5537212


■TBMH32 For Back turning

GTT Tool Holders for TBMH Inserts Screw accessible from both side　Shank.315(8㎜)～.630(16㎜)Without Off-set

Back

Tur

ning

48

Back Turning

CSV Series - Inserts All CSV series inserts have polished cutting edges.


Note: All angles shown are obtained when insert is set on the holder.All images in this page show right-hand inserts.


■CSVB - Back Turning

Item number Chip- breaker

Edge geometry（α×β°） VM1 TAS(Inch) (㎜) (Inch) (㎜) Order Code R L Order Code Order Code R

CSVB11FR/LV-M No .039 1.00 .006×2° 0.15×2° 5386289 ● ● 5386297 5503255 ●CSVB11FR/LVB-M Yes .039 1.00 .006×2° 0.15×2° 5386305 ● ● 5386313 5503248 ●

1/4"

(6.35)

α

β°45°

0.00.98(2.5)

W±.002"

1/4"

(6.35)




AA .787（20）

.004

（0.1）

１°

AA １°

.787（20）

.004

（0.1）

AA

.787（20）

0.0

１°

φ









CSV..11..




Back

Tur

ning

49

Cut-off / Parting

Cut-o

ff /

Part

ing

50

Cut-off Tools

CTP CTPA CTPS


Covered rangeMax. φ.472"



Blade width.020" to .079"



CTP..FR/L.. CTPA..FR/L CTPS..FR/L..◦Vertical clamping ensures rigid and stable cut-off operations.◦Sharp cutting edge available with ground chipbreaker and flat-top.

CSV CSV-NC

➡Page 57 ➡Page 57





CSVC..FR/L.. CSVC..FR/L..◦Square shank size as small as 7mm.◦All inserts are ground and polished.

NTK Cut-off Tools - Product LinesNTK offers a variety of cut-off tools as narrow width as .020" (0.5mm).NTK cut-off tools are specialized to small part applications.

For CTP, CTPA, and CTPS, SUB style holders are available, which have extra clearance for sub spindle.

Sub-chuck

Guide Bushing◦All inserts shown on this page are double-ended.

◦Even if a cutting edge broke, the other edge can be used without any limitations.

CTPW

➡Page 52


Blade width .098"CTPW..FR/L..

Extremely rigid due to the serration on the back of insert.

φ.78

7"(2

0.0㎜

)

φ.19

7"(5

.0㎜)

φ.63

0"(1

6.0㎜

)

Cut-o

ff /

Part

ing

51

CTV

➡Page 56

Covered range Max. φ1.378"Blade width .098"・.118"

CTV..R/L..

Cut-off Insert Edge Configuration

φ1.3

78"

(45.0

㎜)

For Right Hand Toolholder For Left Hand Toolholder

FR, FRFT*FRV**

FRN, FRS*FRNV** FRK FL, FLV** FLN, FLS* FLK, FLKFT*

FLKV**

* FRFT, FRS, FLKFT and FLS have flat top. (No chipbreakers)** FRV, FRNV, FLV and FLKV have flat top with polished surface.

Cut-o

ff /

Part

ing

52

Cut-off Tools

■CTP / CTPA ■CTPW

CTP / CTPA / CTPW Inserts (Right-hand)

50°

±.002"

50°

±.002"

Insert Geometry (Inch)

CTP .787 .315 .098CTPA .984 .370 .138CTPW 1.772 .382 .256

±.002"

FR HolderType

Max Cut-off Dia. GradeItem Number (Inch) (㎜) (Inch) (㎜) (Deg.) (Inch) (㎜) ZM3 VM1 QM3 KM1CTP 05 FR-SH CTPR.. .197 5 .020 0.5 15 .001 0.03 ●CTP 07 FR CTPR.. .315 8 .028 0.7 16 .002 0.05 ●CTP 10 FR CTPR.. .472 12 .039 1.0 16 .002 0.05 ● ●CTP 15 FR CTPR.. .472 12 .059 1.5 16 .002 0.05 ● ●CTPX 15 FR CTPR.. .472 12 .059 1.5 16 .002 0.05 ●CTP 20 FR CTPR.. .472 12 .079 2.0 16 .002 0.05 ● ●CTPX 20 FR CTPR.. .472 12 .079 2.0 16 .002 0.05 ●CTPA 07 FR CTPAR.. .315 8 .028 0.7 16 .002 0.05 ●CTPA 10 FR CTPAR.. .472 12 .039 1.0 16 .002 0.05 ● ● ●CTPA 15 FR CTPAR.. .630 16 .059 1.5 16 .002 0.05 ● ● ●CTPA 20 FR CTPAR.. .630 16 .079 2.0 16 .002 0.05 ● ● ●CTPW 25 FR CTPWR.. .787 20 .098 2.5 17 .002 0.05 ●

±.002"

FRFT, FRV HolderType

Max Cut-off Dia. GradeItem Number (Inch) (㎜) (Inch) (㎜) (Deg.) (Inch) (㎜) ZM3 VM1 QM3 KM1CTP 10 FRV＊ CTPR.. .472 12 .039 1.0 20 .000 0.00 ● ● ○CTP 15 FRV＊ CTPR.. .472 12 .059 1.5 20 .000 0.00 ● ● ○CTP 20 FRV＊ CTPR.. .472 12 .079 2.0 20 .000 0.00 ● ● ○CTPA 10 FRFT CTPAR.. .472 12 .039 1.0 20 .002 0.05 ●CTPA 15 FRFT CTPAR.. .630 16 .059 1.5 20 .002 0.05 ●

＝0°

±.002"±0.05

=0°

FRN-P(PCD tipped)

FRN, FRN-P HolderType

Max Cut-off Dia. GradeItem Number (Inch) (㎜) (Inch) (㎜) (Deg.) (Inch) (㎜) ZM3 VM1 QM3 PD1CTP 05 FRN-SH CTPR.. .197 5 .020 0.5 0 .001 0.03 ●CTP 10 FRN CTPR.. .472 12 .039 1.0 0 .002 0.05 ●CTP 15 FRN CTPR.. .472 12 .059 1.5 0 .002 0.05 ● ●CTPX 15 FRN CTPR.. .472 12 .059 1.5 0 .002 0.05 ●CTP 20 FRN CTPR.. .472 12 .079 2.0 0 .002 0.05 ● ●CTPX 20 FRN CTPR.. .472 12 .079 2.0 0 .002 0.05 ●CTPA 07 FRN CTPAR.. .315 8 .028 0.7 0 .002 0.05 ●CTPA 10 FRN CTPAR.. .472 12 .039 1.0 0 .002 0.05 ● ● ●CTPA 15 FRN CTPAR.. .630 16 .059 1.5 0 .002 0.05 ● ● ●CTPA 20 FRN CTPAR.. .630 16 .079 2.0 0 .002 0.05 ● ● ●CTPA 20 FRN-P CTPAR.. .630 16 .079 2.0 0 .004 0.10 ●CTPW 25 FRN CTPWR.. .787 20 .098 2.5 0 .002 0.05 ●

＝0°

±.002"

FRNV, FRS HolderType

Max Cut-off Dia. GradeItem Number (Inch) (㎜) (Inch) (㎜) (Deg.) (Inch) (㎜) ZM3 VM1 QM3 KM1CTP 15 FRNV＊ CTPR.. .472 12 .059 1.5 0 .000 0.00 ○CTP 20 FRNV＊ CTPR.. .472 12 .079 2.0 0 .000 0.00 ○CTPA 10 FRS CTPAR.. .472 12 .039 1.0 0 .002 0.05 ●CTPA 15 FRS CTPAR.. .630 16 .059 1.5 0 .002 0.05 ●CTPA 20 FRS CTPAR.. .630 16 .079 2.0 0 .002 0.05 ●

±.002"

FRK HolderType

Max Cut-off Dia. GradeItem Number (Inch) (㎜) (Inch) (㎜) (Deg.) (Inch) (㎜) ZM3 VM1 QM3 KM1CTP 10 FRK CTPR.. .433 11 .039 1.0 16 .002 0.05 ○ □CTP 15 FRK CTPR.. .433 11 .059 1.5 16 .002 0.05 ○CTP 20 FRK CTPR.. .433 11 .079 2.0 16 .002 0.05 ○

* "V" denotes polished edge with .000"R.

Flat top

Flat top

● Stock ○ 1-2 week delivery □ To be discontinuedSee page 129 for order codes.

Cut-o

ff /

Part

ing

53

CTP / CTPA / CTPW Inserts (Left-hand)±.002"

FLK HolderType

Max Cut-off Dia. GradeItem Number (Inch) (㎜) (Inch) (㎜) (Deg.) (Inch) (㎜) ZM3 VM1 QM3 KM1CTP 05 FLK-SH CTPL.. .197 5 .020 0.5 17 .001 0.03 ●CTP 10 FLK CTPL.. .433 11 .039 1.0 16 .002 0.05 ●CTP 10 FLK-211 CTPL.. .472 12 .039 1.0 16 .002 0.05 ●CTP 15 FLK CTPL.. .433 11 .059 1.5 16 .002 0.05 ● ●CTPX 15 FLK CTPL.. .433 11 .059 1.5 16 .002 0.05 ●CTP 20 FLK CTPL.. .433 11 .079 2.0 16 .002 0.05 ● ●CTPX 20 FLK CTPL.. .433 11 .079 2.0 16 .002 0.05 ●CTPA 07 FLK CTPAL.. .256 6.5 .028 0.7 16 .002 0.05 ●CTPA 10 FLK CTPAL.. .433 11 .039 1.0 16 .002 0.05 ● ● ●CTPA 15 FLK CTPAL.. .571 14.5 .059 1.5 16 .002 0.05 ● ● ●CTPA 20 FLK CTPAL.. .571 14.5 .079 2.0 16 .002 0.05 ● ● ●CTPW 25 FLK CTPWL.. .787 20 .098 2.5 17 .002 0.05 ●

±.002" FLKFT, FLKV Holder

TypeMax Cut-off Dia. Grade

Item Number (Inch) (㎜) (Inch) (㎜) (Deg.) (Inch) (㎜) ZM3 VM1 QM3 KM1CTP 15 FLKV* CTPL.. .433 11 .059 1.5 20 .000 0.00 ●CTPA 10 FLKFT CTPAL.. .472 12 .039 1.0 16 .002 0.05 ●CTPA 15 FLKFT CTPAL.. .630 16 .059 1.5 16 .002 0.05 ●

＝0°

±.002" ±0.05

=0°

FLN-P(PCD tipped)

FLN HolderType

Max Cut-off Dia. GradeItem Number (Inch) (㎜) (Inch) (㎜) (Deg.) (Inch) (㎜) ZM3 VM1 QM3 PD1CTP 05 FLN-SH CTPL.. .197 5 .020 0.5 0 .001 0.03 ●CTP 10 FLN CTPL.. .472 12 .039 1.0 0 .002 0.05 ●CTP 15 FLN CTPL.. .472 12 .059 1.5 0 .002 0.05 ● ●CTPX 15 FLN CTPL.. .472 12 .059 1.5 0 .002 0.05 ●CTP 20 FLN CTPL.. .472 12 .079 2.0 0 .002 0.05 ● ●CTPX 20 FLN CTPL.. .472 12 .079 2.0 0 .002 0.05 ●CTPA 10 FLN CTPAL.. .472 12 .039 1.0 0 .002 0.05 ● ● ●CTPA 15 FLN CTPAL.. .630 16 .059 1.5 0 .002 0.05 ● ● ●CTPA 20 FLN CTPAL.. .630 16 .079 2.0 0 .002 0.05 ● ● ●CTPA 20 FLN-P CTPAL.. .630 16 .079 2.0 0 .004 0.10 ●CTPW 25 FLN CTPWL.. .787 20 .098 2.5 0 .002 0.05 ●

±.002"

＝0°FLNV, FLS Holder

TypeMax Cut-off Dia. Grade

Item Number (Inch) (㎜) (Inch) (㎜) (Deg.) (Inch) (㎜) ZM3 VM1 QM3 KM1CTP 15 FLNV* CTPL.. .472 12 .059 1.5 0 .000 0.00 ○CTP 20 FLNV* CTPL.. .472 12 .079 2.0 0 .000 0.00 ○CTPA 10 FLS CTPAL.. .472 12 .039 1.0 0 .002 0.05 ●CTPA 15 FLS CTPAL.. .630 16 .059 1.5 0 .002 0.05 ●CTPA 20 FLS CTPAL.. .630 16 .079 2.0 0 .002 0.05 ●CTPW 25 FLNV* CTPWL.. .787 20 .098 2.5 0 .000 0.00 ●

±.002"

FL HolderType

Max Cut-off Dia. GradeItem Number (Inch) (㎜) (Inch) (㎜) (Deg.) (Inch) (㎜) ZM3 VM1 QM3 KM1CTP 07 FL CTPL.. .315 8 .028 0.7 16 .002 0.05 ○CTP 10 FL CTPL.. .472 12 .039 1.0 16 .002 0.05 ○CTP 15 FL CTPL.. .472 12 .059 1.5 16 .002 0.05 ○CTP 20 FL CTPL.. .472 12 .079 2.0 16 .002 0.05 ○CTPA 07 FL CTPAL.. .315 8 .028 0.7 16 .002 0.05 ○CTPA 10 FL CTPAL.. .472 12 .039 1.0 16 .002 0.05 ○ ○CTPA 15 FL CTPAL.. .630 16 .059 1.5 16 .002 0.05 ○ ○CTPA 20 FL CTPAL.. .630 16 .079 2.0 16 .002 0.05 ○ ○CTPW 25 FL CTPWL.. .787 20 .098 2.5 17 .002 0.05 ○


* "V" denotes polished edge with .000"R.

Flat top

Flat top

See page 129 for order codes.

Cut-o

ff /

Part

ing

54

Cut-off Tools

■CTP / CTPA

■CTPW


CTP / CTPA / CTPW Tool Holders

b

AA22

φD

1°

(Inch)GageInsert

φ max for holder Item Number Clamp Screw Wrench Right-hand Left-hand

Order Code Stock Stock Order Code

CTPFR../FL..

.472 CTPR/L06-IN 3/8 3/8 .079 3/8 .217 .591 4.724 LRIS-4X10PW CLR-15S 5499967 ● ● 5487392

.472 CTPR/L08-IN 1/2 1/2 0 1/2 .217 .591 4.724 LRIS-4X12PW CLR-15S 5487418 ● ● 5487400

.472 CTPR/L10-IN 5/8 5/8 0 5/8 .217 .591 4.724 LRIS-4X12PW CLR-15S 5574850 ● ● 5574868

CTPAFR../FL..

.630 CTPAR/L06-IN 3/8 3/8 .079 3/8 .295 .768 4.724 LRIS-4X10PW CLR-15S 5573118 ● ● 5573134

.630 CTPAR/L08-IN 1/2 1/2 0 1/2 .295 .768 4.724 LRIS-4X12PW CLR-15S 5573100 ● ● 5573126

.630 CTPAR/L10-IN 5/8 5/8 0 5/8 .295 .768 4.724 LRIS-4X12PW CLR-15S 5574835 ● ● 5574843CTPW

FR../FL...787 CTPWR/L08-IN 1/2 .498 ― .630 .591 ― 4.724 LRIS-4X10 LLR-25S 5527007 ● ● 5573423.787 CTPWR/L10-IN 5/8 .623 ― .630 .591 ― 4.724 LRIS-4X10 LLR-25S 5574884 ● ● 5574892

(Metric, ㎜ )GageInsert

φ max for holder Item Number Clamp Screw Wrench Right-hand Left-hand

Order Code Stock Stock Order Code

CTPFR../FL..

12 CTPR/L08 8 8 4 10 5.5 15 120 LRIS-4X10PW CLR-15S 5131362 ● ● 513135412 CTPR/L10 10 10 2 10 5.5 15 120 LRIS-4X10PW CLR-15S 5089644 ○ ○ 508963612 CTPR/L12 12 12 0 12 5.5 15 120 LRIS-4X12PW CLR-15S 5089651 ○ ○ 508966912 CTPR/L16 16 16 0 16 5.5 15 120 LRIS-4X12PW CLR-15S 5183496 ○ ○ 5183504

CTPAFR../FL..

16 CTPAR/L10 10 10 2 10 7.5 19.5 120 LRIS-4X10PW CLR-15S 5199187 ○ ○ 519915316 CTPAR/L12 12 12 0 12 7.5 19.5 120 LRIS-4X12PW CLR-15S 5199195 ○ ○ 519916116 CTPAR/L16 16 16 0 16 7.5 19.5 120 LRIS-4X12PW CLR-15S 5199203 ○ ○ 519917916 CTPAR/L20F 20 20 0 20 7.5 19.5 80 LRIS-4X10 LLR-25S 5459540 ○ ○ 5459557

CTPWFR../FL..

20 CTPWR10/CTPWL10A 10 9.95 ― 16 15 ― 120 LRIS-4X10 LLR-25S 5443593 ○ ○ 5487004

20 CTPWR12/CTPWL12A 12 11.95 ― 16 15 ― 120 LRIS-4X10 LLR-25S 5443601 ○ ○ 5488150

20 CTPWR/L16 16 15.95 ― 16 15 ― 120 LRIS-4X10 LLR-25S 5443627 ○ ○ 548698020 CTPWR/L20 20 19.95 ― 20 15 ― 120 LRIS-4X10 LLR-25S 5443635 ○ ○ 5486998



Cut-o

ff /

Part

ing

55

AA

5.51°

φD

■CTPR-SUB / CTPAR-SUB

■CTPL-SUB / CTPAL-SUB


CTPR-SUB / CTPAR-SUB

CTPL-SUB / CTPAL-SUB

φD

1°

2°

φφ

Sub-chuckGuide bushing

φφ

Sub-chuckGuide bushing

(Inch)GageInsert

φ maxfor holder Item Number Clamp Screw Wrench Order Code Stock

CTPFR..

.472 CTPR06-IN-SUB 3/8 3/8 .079 3/8 .217 .591 4.724 .630 45 .217 LRIS-4X5 LLR-25S 5573381 ●

.472 CTPR08-IN-SUB 1/2 1/2 0 1/2 .217 .591 4.724 .630 45 .217 LRIS-4X5 LLR-25S 5573399 ●

.472 CTPR10-IN-SUB 5/8 5/8 0 5/8 .217 .591 4.724 .630 45 .217 LRIS-4X5 LLR-25S 5574876 ●

CTPAFR..

.630 CTPAR06-IN-SUB 3/8 3/8 .079 3/8 .295 .768 4.724 .787 25 .217 LRIS-4X5 LLR-25S 5650924 ●

.630 CTPAR08-IN-SUB 1/2 1/2 0 1/2 .295 .768 4.724 .787 25 .217 LRIS-4X5 LLR-25S 5650916 ●

.630 CTPAR10-IN-SUB 5/8 5/8 0 5/8 .295 .768 4.724 .787 25 .217 LRIS-4X5 LLR-25S 5652409 ●＊Also available in 8㎜ (CTP-SUB only),10㎜ and 12㎜ shanks. Please contact NTK for detail.

(Inch, Metric)GageInsert

φ maxfor holder Item Number Clamp Screw Wrench Order Code Stock

CTPFL..

12 CTPL08-SUB 8 8 4 10 5.5 15 120 16 30 5.5 LRIS-4X5 LLR-25S 5570791 ○12 CTPL10GX-SUB 10 10 2 10 5.5 15 85 16 30 5.5 LRIS-4X5 LLR-25S 5499389 ○12 CTPL12GX-SUB 12 12 0 12 5.5 15 85 16 30 5.5 LRIS-4X5 LLR-25S 5482534 ○

CTPAFL..

.630 CTPAL06-IN-SUB 3/8 3/8 .079 3/8 .295 .768 4.724 .787 30 .217 LRIS-4X5 LLR-25S 5650932 ●

.630 CTPAL08-IN-SUB 1/2 1/2 0 1/2 .295 .768 4.724 .787 30 .217 LRIS-4X5 LLR-25S 5650908 ●

.630 CTPAL10-IN-SUB 5/8 5/8 0 5/8 .295 .768 4.724 .787 30 .217 LRIS-4X5 LLR-25S 5652615 ●＊Metric size is available for CTPAL-SUB upon request. Please contact NTK for detail.

φDsCTPR-SUB：φ1.18"CTPAR-SUB:φ1.42"

φDsCTPL-SUB：φ1.18"CTPAL-SUB:φ1.42"

Cut-o

ff /

Part

ing

56

Cut-off Tools

CTV Series - Inserts

CTV Series - Tool Holders

InsertZM3 QM3

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock Order Code StockCTV25N .098 2.50 .472 12 0° .008 0.20 5862248 ○CTV30N .118 3.00 .472 12 0° .008 0.20 5864145 ○ 5972997 ○CTV25R .098 2.50 .472 12 8° .008 0.20 5868633 ○CTV30R .118 3.00 .472 12 8° .008 0.20 5866892 ○CTV30L .118 3.00 .472 12 8° .008 0.20 5129564 ○CTV25R00A .098 2.50 .472 12 8° .002 MAX. 0.05 max. 5162003 ●CTV30R00A .118 3.00 .472 12 8° .002 MAX. 0.05 max. 5185327 ○CTV25R00B .098 2.50 .472 12 17° .002 MAX. 0.05 max. 5185178 ○CTV30R00B .118 3.00 .472 12 17° .002 MAX. 0.05 max. 5183223 ○

(Metric, ㎜ )

GageInsert

Max.cut-offdiameter φ

Item number Clamp screw Wrench


(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜)OrderCode Stock Stock Order

Code

CTV25.. .900 (22.9) CTVR/L08B 1/2" .098 2.5 4.5 114 .945 24 .480 12.2 1/2" 1/2" .520 13.2 BS0620 LW-4 5916119 ● □ 6000179

CTV25...906 (23)

CTVR/L16K25S .630 16 .098 2.5 4.921 125 .945 24 .480 12.2 .630 16 .630 16 .650 16.5 BS0620 LW-4 5904131 ●CTV30.. CTVR/L16K30S .630 16 .118 3.0 4.921 125 .945 24 .480 12.2 .630 16 .630 16 .650 16.5 BS0620 LW-4 5904149 ●CTV25.. CTVR/L20K25S .787 20 .098 2.5 4.921 125 .945 24 .480 12.2 .787 20 .787 20 .807 20.5 BS0620 LW-4 5904180 ○CTV30.. CTVR/L20K30S .787 20 .118 3.0 4.921 125 .945 24 .480 12.2 .787 20 .787 20 .807 20.5 BS0620 LW-4 5904172 ○CTV25..

1.378 (35)

CTVR/L16K25 .630 16 .098 2.5 4.921 125 1.260 32 .728 18.5 .630 16 .630 16 .650 16.5 BS0620 LW-4 5853619 ● ○ 5853627CTV30.. CTVR/L16K30 .630 16 .118 3.0 4.921 125 1.260 32 .728 18.5 .630 16 .630 16 .650 16.5 BS0620 LW-4 5853593 ○ ○ 5853601CTV25.. CTVR/L20K25 .787 20 .098 2.5 4.921 125 1.260 32 .728 18.5 .787 20 .787 20 .807 20.5 BS0620 LW-4 5853643 ● ○ 5853635CTV30.. CTVR/L20K30 .787 20 .118 3.0 4.921 125 1.260 32 .728 18.5 .787 20 .787 20 .807 20.5 BS0620 LW-4 5853577 ○ ○ 5853585

Clamp on typeMax.cut-off diameterφ.906(23) ～φ1.378(35)

● Stock ○ 1-2 week delivery □ To be discontinued

.252（639）

12°

θ θ

90° ±.002"

.252（639）

12°

θ θ90° ±.002"

.020（0.5）

φD

6°

Max. cut-off diameter


CTV..N CTV..R CTV..L

Cut-o

ff /

Part

ing

57





■CSVC - Cut-off


Max. Cut-off Dia. Width VM1(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code R L Order Code

CSVC11FR/LV06 No .118 3 .024 0.6 .079 2.0 0.0 5352547 ○CSVC11FR/LV07 No .157 4 .028 0.7 .098 2.5 0.0 5324272 ● ● 5330840CSVC11FR/LV08 No .157 4 .031 0.8 .098 2.5 0.0 5324256 ○ ○ 5330832CSVC11FR/LV10 No .197 5 .039 1.0 .118 3.0 0.0 5303490 ● ● 5303599CSVC11FR/LV13 No .197 5 .051 1.3 .118 3.0 0.0 5311824 ○ ○ 5311816CSVC11FR/LVB06 Yes .118 3 .024 0.6 .079 2.0 0.0 5358734 ○CSVC11FR/LVB07 Yes .157 4 .028 0.7 .098 2.5 0.0 5358742 ●CSVC11FR/LVB08 Yes .157 4 .031 0.8 .098 2.5 0.0 5358767 ○CSVC11FR/LVB10 Yes .197 5 .039 1.0 .118 3.0 0.0 5358783 ●CSVC11FR/LVB13 Yes .197 5 .051 1.3 .118 3.0 0.0 5358676 ○

25°

W±.002"

1/4"

(6.35)

1/4"

(6.35)




AA .787（20）

.004

（0.1）

１°

AA １°

.787（20）

.004

（0.1）

AA

.787（20）

0.0

１°

φ









CSV..11..




Cut-o

ff /

Part

ing

58

Cut-off Tools

■CTPSR


■CTPS

CTPS Series - Inserts

CTPS Series - Tool Holders

(Inch, Metric)

Gage Insert Item numberSpare parts

Order Code Stock(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Clamp screw Wrench

CTPS.. CTPSR06-IN 3/8" 3/8" 3/8" LRIS-2.5×7 CLR-15S 5573407 ●CTPS.. CTPSR08-IN 1/2" 1/2" 1/2" LRIS-2.5×7 CLR-15S 5573415 ●CTPS.. CTPSR10 .394 10 .394 10 .394 10 LRIS-2.5×7 CLR-15S 5346572 ○CTPS.. CTPSR12 .472 12 .472 12 .472 12 LRIS-2.5×7 CLR-15S 5397187 ○

Max. Depth of CutItem number

ZM3 VM1(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock Order Code Stock.157 4.0 CTPS12FR .047 1.2 .138 3.5 16° .002 0.05 5346275 ● 5362587 ○.197 5.0 CTPS15FR .059 1.5 .157 4.0 16° .002 0.05 5346267 ● 5362595 ○.335 8.5 CTPS18FR .071 1.8 .217 5.5 16° .002 0.05 5346283 ○ 5362603 ○.394 10.0 CTPS20FR .079 2.0 .236 6.0 16° .002 0.05 5374210 ○ 5374194 ○.157 4.0 CTPS12FRV .047 1.2 .138 3.5 20° 0.0 5346937 ● 5362611 ○.197 5.0 CTPS15FRV .059 1.5 .157 4.0 20° 0.0 5346929 ● 5362629 ○.335 8.5 CTPS18FRV .071 1.8 .217 5.5 20° 0.0 5346945 ● 5362637 ○.394 10.0 CTPS20FRV .079 2.0 .236 6.0 20° 0.0 5374202 ● 5374228 ○

〈With Chipbreaker〉〈Flat-top, No Chipbreaker〉

CTPS..FR CTPS..FRV

Note: θ shows the angle when insert is set on the holder.

Screw-on type, Maximum diameter : .394" (10㎜)

±.002"

θ

.787（20）

.098

（2.5）

.236

（6.0）

45°

±.002"

θ

.787(20)

45°

.098(2.5)

.236

（6.0）

AA

1°

4.724（120）197

（5.0）

0.0

Cut-o

ff /

Part

ing

59

Grooving

Gro

ovin

g

60

Grooving

NTK Grooving Tools - Product Lines

GTT DS-GTT

➡Page 62, 65 ➡Page 66

Blade width .012" to .118" Blade width .012" to .118"Depth of cut .010" to .106" Depth of cut .010" to .106"Y-axis holder available ➡Page 66

GTM..32..R/L.., TMG32..R/L..3-corner design. Wide selection in groove widths.

■ OD Grooving

GTVW GTPA CSV


Blade width .118" to .236" Blade width .079" to .098" Blade width .010" to .059"Depth of cut .244" to .315" Depth of cut .118" to .197" Depth of cut .006" to .102"

Y-axis holder available ➡Page 68GVW..N.. GTPA..FR.. CSVG11..

For micro machining

Gro

ovin

g

61

FGV DS-FGV CH-FGV

➡Page 70, 71 ➡Page 70, 71 ➡Page 70, 71

Blade width .039" to .079" Blade width .039" to .079" Blade width .039" to .079"Depth of cut .059" to .118" Depth of cut .059" to .118" Depth of cut .059" to .118"

FGV... FGV... FGV...L-shape for gang tool slot For drill sleeve

SBG

➡Page 90

Blade width .020" to .079"Depth of cut .032" to .087"Min. Bore Dia. φ.118"

■ ID Grooving

■ Face Grooving

Gro

ovin

g

62

Grooving

Inserts for GTT Holders

■GTMX32-T

Item numberWidth W Max. depth of cut QM3

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code R L Order CodeGTMX 32030 R/LT .012 0.30 .010 0.25 .024 0.6 .002 0.05 5510110 ● ○ 5510490GTMX 32033 R/LT .013 0.33 .010 0.25 .024 0.6 .002 0.05 5510102 ● ● 5510508GTMX 32043 R/LT .017 0.43 .035 0.9 .047 1.2 .002 0.05 5510094 ● ○ 5510516GTMX 32050 R/LT .020 0.50 .035 0.9 .047 1.2 .002 0.05 5493895 ● ● 5516034GTMX 32053 R/LT .021 0.53 .035 0.9 .047 1.2 .002 0.05 5510086 ● ○ 5510524GTMX 32065 R/LT .026 0.65 .035 0.9 .047 1.2 .002 0.05 5510078 ● ○ 5510532GTMX 32075 R/LT .030 0.75 .063 1.6 .079 2.0 .002 0.05 5493903 ● ● 5510540GTMX 32080 R/LT .031 0.80 .063 1.6 .079 2.0 .002 0.05 5510060 ● ● 5510573GTMX 32095 R/LT .037 0.95 .063 1.6 .079 2.0 .002 0.05 5493911 ○ ○ 5510581GTMX 32100 R/LT .039 1.00 .063 1.6 .079 2.0 .002 0.05 5493929 ● ○ 5510599GTMX 32100 R/LT01 .039 1.00 .063 1.6 .079 2.0 .004 0.1 5510136 ● ○ 5510698GTMX 32110 R/LT .043 1.10 .063 1.6 .079 2.0 .002 0.05 5510052 ○ ○ 5510607GTMX 32120 R/LT .047 1.20 .063 1.6 .079 2.0 .002 0.05 5493937 ● ○ 5510623GTMX 32120 R/LT01 .047 1.20 .063 1.6 .079 2.0 .004 0.1 5510128 ○ ○ 5510706GTMX 32125 R/LT .049 1.25 .063 1.6 .079 2.0 .002 0.05 5510045 ● ● 5510631GTMX 32130 R/LT .051 1.30 .063 1.6 .079 2.0 .002 0.05 5510037 ○ ○ 5510649GTMX 32140 R/LT .055 1.40 .063 1.6 .079 2.0 .002 0.05 5510029 ○ ○ 5510656GTMX 32145 R/LT .057 1.45 .106 2.7 .118 3.0 .002 0.05 5510011 ○ ○ 5510664GTMX 32150 R/LT .059 1.50 .106 2.7 .118 3.0 .002 0.05 5493945 ● ● 5510672GTMX 32150 R/LT01 .059 1.50 .106 2.7 .118 3.0 .004 0.1 5510482 ● ● 5510714GTMX 32150 R/LT02 .059 1.50 .106 2.7 .118 3.0 .008 0.2 5523196 ●GTMX 32160 R/LT .063 1.60 .106 2.7 .118 3.0 .002 0.05 5510003 ● ● 5510680GTMX 32175 R/LT .069 1.75 .106 2.7 .118 3.0 .002 0.05 5510243 ○ ○ 5510458GTMX 32180 R/LT .071 1.80 .106 2.7 .118 3.0 .002 0.05 5510250 ○ ○ 5510466GTMX 32200 R/LT .079 2.00 .106 2.7 .118 3.0 .002 0.05 5510227 ● ● 5510425GTMX 32200 R/LT01 .079 2.00 .106 2.7 .118 3.0 .004 0.1 5510433 ○ ○ 5510441GTMX 32200 R/LT02 .079 2.00 .106 2.7 .118 3.0 .008 0.2 5523188 ●GTMX 32250 R/LT .098 2.50 .106 2.7 .118 3.0 .002 0.05 5510219 ● ○ 5510417GTMX 32250 R/LT01 .098 2.50 .106 2.7 .118 3.0 .004 0.1 5523204 ○GTMX 32250 R/LT02 .098 2.50 .106 2.7 .118 3.0 .008 0.2 5523170 ○GTMX 32300 R/LT .118 3.00 .106 2.7 .118 3.0 .002 0.05 5510235 ● ● 5510771GTMX 32300 R/LT01 .118 3.00 .106 2.7 .118 3.0 .004 0.1 5657325 □GTMX 32300 R/LT02 .118 3.00 .106 2.7 .118 3.0 .008 0.2 5523162 ●

Width tolerance　w±.001" Side Turning Capable

Tool Holders for right-hand inserts GTTR, DS-GTTL, Y-GTTRTool Holders for left-hand inserts GTTL


3/8" 1/8"14°

14° ±.001"

3/8" 1/8"14°

14° ±.001"


Gro

ovin

g

63

■GTMH32-EWidth tolerance　w±.001"


Item numberWidth W Max depth of cut QM3 ZM3

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock Order Code StockGTMH 32050 RE025 .020 0.50 .035 0.9 .047 1.2 .010 0.25 5655725 ● 5446125 ●GTMH 32070 RE035 .028 0.70 .063 1.6 .079 2.0 .014 0.35 5446141 ●GTMH 32100 RE05 .039 1.00 .063 1.6 .079 2.0 .020 0.50 5642830 ● 5160759 ●GTMH 32150 RE075 .059 1.50 .106 2.7 .118 3.0 .030 0.75 5684345 ●GTMH 32200 RE10 .079 2.00 .106 2.7 .118 3.0 .039 1.00 5692280 ● 5160775 ○GTMH 32300 RE15 .118 3.00 .106 2.7 .118 3.0 .059 1.50 5655683 ● 5436720 ○

Item numberWidth W Max depth of cut VM1

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code StockGTMH 32033 RVT .013 0.33 .010 0.25 .024 0.6 0.0 0.0 5359484 ●GTMH 32043 RVT .017 0.43 .035 0.9 .047 1.2 0.0 0.0 5359500 ●GTMH 32053 RVT .021 0.53 .063 1.6 .079 2.0 0.0 0.0 5359526 ●GTMH 32065 RVT .026 0.65 .063 1.6 .079 2.0 0.0 0.0 5359542 ●GTMH 32075 RVT .030 0.75 .063 1.6 .079 2.0 0.0 0.0 5359567 ●GTMH 32080 RVT .031 0.80 .063 1.6 .079 2.0 0.0 0.0 5359609 ●GTMH 32085 RVT .033 0.85 .063 1.6 .079 2.0 0.0 0.0 5359633 ●GTMH 32100 RVT .039 1.00 .063 1.6 .079 2.0 0.0 0.0 5359674 ●GTMH 32150 RVT .059 1.50 .106 2.7 .118 3.0 0.0 0.0 5359773 ●GTMH 32200 RVT .079 2.00 .106 2.7 .118 3.0 0.0 0.0 5360532 ●

Full Radius Groover

① To perform side turning with an insert whose groove width is greater than 0.43㎜ (.017"), set side turning feed rate to 0.03㎜/rev (.001in/rev) or smaller.

② On performing side turning with an insert whose groove width is greater than 0.43㎜ (.017") at the feed rate over 0.03㎜/rev (.001in/rev) (0.1㎜/rev (.004in/rev) max), it is likely that chip damages grooved sides. In this case, please perform grooving by two or more passes to make room for chips before performing side turning.

■Tips for Cutting Condition Selection (GTMH32-(V)T style inserts)


20°

■GTMH32-VTWidth tolerance　w±.001"


Side Turning Capable

3/8" 1/8"

14°±.001"

14°

Polished

3/8" 1/8"

±.001"

Gro

ovin

g

64

Grooving■TMG32-E/GTMH32-U ■GTMH32-E

TMG32-E (Inch)Width W Max depth of cut

ZM3Item number Order Code R L Order Code

TMG 32031 R/LE01 .031 .063 .079 .004 5472238 ● ● 5472246TMG 32039 R/LE01 .039 .063 .079 .004 5472253 ● ● 5472261TMG 32049 R/LE01 .049 .063 .079 .004 5472279 ● ● 5472287TMG 32062 R/LE02 .062 .106 .118 .008 5472295 ● □ 5472303TMG 32079 R/LE02 .079 .106 .118 .008 5488754 ● □ 5580048TMG 32094 R/LE02 .094 .106 .118 .008 5472311 ●TMG 32125 R/LE02 .125 .106 .118 .008 5472337 ● □ 5472345

GTMH32-E Width W Max depth of cut ZM3Item number (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code R L Order Code

GTMH 32033 R/LE .013 0.33 .012 0.3 .024 0.6 .001 0.03 5108766 ○ ○ 5109046GTMH 32043 R/LE .017 0.43 .035 0.9 .047 1.2 .001 0.03 5108758 ● ○ 5109038GTMH 32053 R/LE .021 0.53 .035 0.9 .047 1.2 .002 0.05 5108774 ○ ○ 5109020GTMH 32075 R/LE .030 0.75 .063 1.6 .079 2.0 .002 0.05 5108790 ○ ○ 5109012GTMH 32095 R/LE .037 0.95 .063 1.6 .079 2.0 .002 0.05 5108808 ○ ○ 5109004GTMH 32100 R/LE .039 1.00 .063 1.6 .079 2.0 .002 0.05 5108816 ○ ○ 5108998GTMH 32100 R/LE01 .039 1.00 .063 1.6 .079 2.0 .004 0.1 5109079 ○ ○ 5109087GTMH 32120 R/LE .047 1.20 .063 1.6 .079 2.0 .002 0.05 5108824 ● ○ 5108980GTMH 32120 R/LE01 .047 1.20 .063 1.6 .079 2.0 .004 0.1 5109277 ○ ○ 5109251GTMH 32140 R/LE .055 1.40 .063 1.6 .079 2.0 .002 0.05 5108782 ○ ○ 5108907GTMH 32150 R/LE .059 1.50 .106 2.7 .118 3.0 .002 0.05 5108899 ○ ○ 5108972GTMH 32150 R/LE01 .059 1.50 .106 2.7 .118 3.0 .004 0.1 5109061 ○ ○ 5109269GTMH 32180 R/LE .071 1.80 .106 2.7 .118 3.0 .002 0.05 5108881 ○ ○ 5108964GTMH 32200 R/LE .079 2.00 .106 2.7 .118 3.0 .002 0.05 5108873 ○ ○ 5108956GTMH 32200 R/LE01 .079 2.00 .106 2.7 .118 3.0 .004 0.1 5109053 ○ ○ 5109244GTMH 32225 R/LE .089 2.25 .106 2.7 .118 3.0 .002 0.05 5108865 ○ ○ 5108949GTMH 32250 R/LE .098 2.50 .106 2.7 .118 3.0 .002 0.05 5108857 ○ ○ 5108931GTMH 32275 R/LE .108 2.75 .106 2.7 .118 3.0 .002 0.05 5108840 ○ ○ 5108923GTMH 32300 R/LE .118 3.00 .106 2.7 .118 3.0 .002 0.05 5108832 ○ ○ 5108915

GTMH32-U Width W Max depth of cut ZM3Item number (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code R L Order Code

GTMH 32030 R/LU .012 0.30 .012 0.3 .024 0.6 .001 0.03 5995915 ○ ○ 5107107GTMH 32050 R/LU .020 0.50 .035 0.9 .047 1.2 .002 0.05 5995899 ● ○ 5107099GTMH 32075 R/LU .030 0.75 .063 1.6 .079 2.0 .002 0.05 5995907 ● ○ 5948476GTMH 32095 R/LU .037 0.95 .063 1.6 .079 2.0 .002 0.05 5071451 ○ ○ 5107081GTMH 32100 R/LU .039 1.00 .063 1.6 .079 2.0 .002 0.05 5926167 ● ○ 5043625GTMH 32103 R/LU .041 1.03 .063 1.6 .079 2.0 .002 0.05 5283627 ○GTMH 32125 R/LU .049 1.25 .063 1.6 .079 2.0 .002 0.05 5961826 ○ ○ 5107073GTMH 32145 R/LU .057 1.45 .106 2.7 .118 3.0 .002 0.05 5013255 ○ ○ 5107065GTMH 32150 R/LU .059 1.50 .106 2.7 .118 3.0 .002 0.05 5992151 ○ ○ 5923651GTMH 32175 R/LU .069 1.75 .106 2.7 .118 3.0 .002 0.05 5992144 ○ ○ 5107123GTMH 32200 R/LU .079 2.00 .106 2.7 .118 3.0 .002 0.05 5925664 ○ ○ 5044680GTMH 32250 R/LU .098 2.50 .106 2.7 .118 3.0 .002 0.05 5037502 ○ ○ 5107115


3/8" 1/8"

20°＋.002"－ 0

14°3/8" 1/8"

±.001"20°

Width tolerance　w＋.002" －0 Width tolerance　w±.001"

Gro

ovin

g

65

GTT Tool Holders Screw accessible from both side Shank.315(8㎜)～.630(16㎜)Without offset

(Inch)

Gage Insert Item number

Groove width range (W) Clamp screw Wrench Order

Code R L Order Code


TMG32.. GTM..32..

GTTR/L06A-IN

.012～.118 0.30～3.00

.079 2 3/8" 3/8" .118 3 LR-S-4×10PW CLR-15S 5197421 ● ● 5567615

GTTR/L08A-IN .079 2 1/2" 1/2" .039 1 LR-S-4×10PW CLR-15S 5197397 ● ● 5567649

GTTR/L10A-IN .079 2 5/8" 5/8 0 LR-S-4×10PW CLR-15S 5579537 ● ● 5579545

GTTR/L06B-IN

.057～.118 1.45～3.00

.118 3 3/8" 3/8" .118 3 LR-S-4×10PW CLR-15S 5574058 ● ● 5567623

GTTR/L08B-IN .118 3 1/2" 1/2" .039 1 LR-S-4×10PW CLR-15S 5476262 ● ● 5567656

GTTR/L10B-IN .118 3 5/8" 5/8" 0 LR-S-4×10PW CLR-15S 5579552 ● ● 5579560

(Metric, ㎜)

Gage Insert Item number

Groove width range (W) Clamp screw Wrench Order

Code R L Order Code


TMG32.. GTM..32..

GTTR/L08K00

.012～.118 0.30～3.00

.079 2 .315 8 .315 8 .197 5 LR-S-4×10PW CLR-15S 5107206 ● ○ 5107214

GTTR/L10K00 .079 2 .394 10 .394 10 .118 3 LR-S-4×10PW CLR-15S 5107222 ○ ○ 5107230

GTTR/L12K00 .079 2 .472 12 .472 12 .039 1 LR-S-4×10PW CLR-15S 5107248 ● ○ 5107255

GTTR/L16K00 .079 2 .630 16 .630 16 0 LR-S-4×10PW CLR-15S 5173687 ● ○ 5173679

GTTR/L10K15

.057～.118 1.45～3.00

.118 3 .394 10 .394 10 .118 3 LR-S-4×10PW CLR-15S 5107263 ○ ○ 5107271


GTTR/L16K15 .118 3 .630 16 .630 16 0 LR-S-4×10PW CLR-15S 5537287 ● ○ 5537204

GTTR/L10K25

.098～.118 2.50～3.00

.118 3 .394 10 .394 10 .118 3 LR-S-4×10PW CLR-15S 5107289 ○ ○ 5107297


GTTR/L16K25 .118 3 .630 16 .630 16 0 LR-S-4×10PW CLR-15S 5537295 ○ ○ 5537212

Note: Modification is required to groove deeper than L1.

A A

6°

0.0

4.724（120）

591（15）

2°

Max groove depth



Gro

ovin

g

66

Grooving■DS-GTTL

■Y-GTTR

Max depth of cut: .079" (2.0㎜)

Note: DS-GTTL holders take right-hand inserts.


(Inch, Metric)

Gage Insert Item numberφ

Clamp screw Wrench Order Code Stock(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜)

TMG32..R.. GTM..32..R..

DS-GTTL16X .630 16 .591 15 3.740 95 .236 6 LR-S-4×5.8 RLR-20S 5341532 ○

DS-GTTL19 3/4" .709 18 4.724 120 .236 6 LR-S-4×5.8 RLR-20S 5278288 ●

DS-GTTL20 .787 20 .748 19 4.724 120 .236 6 LR-S-4×5.8 RLR-20S 5278304 ○

DS-GTTL22 .866 22 .827 21 4.724 120 .236 6 LR-S-4×5.8 RLR-20S 5324041 ●

DS-GTTL25 1" .945 24 4.724 120 .394 10 LR-S-4×5.8 RLR-20S 5317144 ●

(Inch, Metric)

Gage Insert Item number Clamp screw Wrench Order Code Stock(Inch) (㎜) (Inch) (㎜) (Inch) (㎜)

TMG32..R.. GTM..32..R..

Y-GTTR06-IN 3/8" 3/8" .984 25 LR-S-4×10PW CLR-15S 5573621 ●



Y-GTTR10 .394 10 .394 10 .984 25 LR-S-4×10PW CLR-15S 5358452 ○

Y-GTTR12 .472 12 .472 12 .984 25 LR-S-4×10PW CLR-15S 5358445 ○

A A

2°

2°

φ0.0

.079

（2.0) .787

（20)Max. grooving depth

Feed direcition

Gang tooling post

A

B B

A

2°

2°

6°

0.0

0.0

.079

（2.0)

.787

（20)

4.724（120)

Max. grooving depth



Gro

ovin

g

67

GVW Series - Inserts

GTVW Series - Tool Holders

■GVW

■GTVWClamp-on type

Groove Width Tolerance w±.001"

(Metric, ㎜)Gage Insert Item Number

, Clamp Screw Spring Wrench



GVW300

GTVW R/L1016-3 .394" 10 .630" 16 .244" 6.2 .768" 19.5 .071" 1.8 CVSR/L3 AOS-5X16 ASG-5 LW-2.5S 5512348 ○ ○ 5512355

GTVW R/L1216-3 .472" 12 .630" 16 .244" 6.2 .768" 19.5 .071" 1.8 CVSR/L3 AOS-5X16 ASG-5 LW-2.5S 5512363 ● ○ 5512371

GTVW R/L1616-3 .630" 16 .630" 16 .315" 8.0 .866" 22 .071" 1.8 CVSR/L3 AOS-5X20 ASG-5 LW-2.5S 5512389 ● ○ 5512397

GTVW R/L2020-3 .787" 20 .787" 20 .315" 8.0 .866" 22 .071" 1.8 CVSR/L3 AOS-5X20 ASG-5 LW-2.5S 5565189 ○ ○ 5565197

GVW400 GVW500


GTVW R/L1216-4 .472" 12 .630" 16 .244" 6.2 .768" 19.5 .091" 2.3 CVSR/L4 AOS-5X16 ASG-5 LW-2.5S 5509955 ● ○ 5509963

GTVW R/L1616-4 .630" 16 .630" 16 .315" 8.0 .866" 22 .091" 2.3 CVSR/L4 AOS-5X20 ASG-5 LW-2.5S 5509930 ● ○ 5509948


GVW600





Item NumberQM3

(Inch) (㎜) (Inch) (㎜) Order Code Stock

GVW300N02 .118 3.0 .008 0.2 5520390 ●

GVW300N04 .118 3.0 .016 0.4 5520382 ●

GVW400N02 .157 4.0 .008 0.2 5510839 ●

GVW400N04 .157 4.0 .016 0.4 5510847 ●

GVW500N02 .197 5.0 .008 0.2 5520432 ○

GVW500N04 .197 5.0 .016 0.4 5520424 ○

GVW600N02 .236 6.0 .008 0.2 5520374 ○

GVW600N04 .236 6.0 .016 0.4 5520366 ○

.787（20）

±.001"

A A

4.274（120）

Max. Depth


Gro

ovin

g

68

Grooving

2.5

.295（7.5）

.004

（0.1）

4.724（120）

A

A

.004（0.1） 4.724

（120）

1.063

（27）

GTPA Series - Inserts

■GTPA

■GTPA

■Y-GTPA

(Metric, ㎜)Gage Insert Item number Clamp screw Wrench Order Code Stock

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜)

GTPA GTPAR1010 .394 10 .394 10 .394 10 LRIS-4×10PW CLR-15S 5552401 ○GTPAR1212 .472 12 .472 12 .472 12 LRIS-4×12PW CLR-15S 5552419 ○

(Metric, ㎜)Gage Insert Item number Clamp screw Wrench Order Code Stock

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜)GTPA Y-GTPAR1216 .472 12 .630 16 .787 20 LRIS-4×12PW CLR-15S 5563820 ○

PD1 insert shownShape

Item numberMax. Depth of Cut PD1 KM1

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock Order Code StockGTPA20FRN01 .079 2.0 .157 4.0 PD1: .197

KM1: .234PD1: 5.0KM1: 6.0

.004 max. (Less than .004)

0.1 max. (Less than 0.1)

5552385 ○ 5576525 ○GTPA25FRN01 .098 2.5 .118 3.0 5552393 ○ 5576533 ○


236(6.0) 362

（9.2）

37（9.4）

20°

45°

±.002"

138

（3.5）

GTPA Series - Tool Holders Screw accessible from both sides

Gro

ovin

g

69





Item number Width Max. Depth of Cut VM1(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code R L Order Code

CSVG11FR/LV025 .010 0.25 .006 0.15 .020 0.50 0.0 5354634 ●CSVG11FR/LV030 .012 0.30 .006 0.15 .020 0.50 0.0 5344940 ○CSVG11FR/LV035 .014 0.35 .006 0.15 .020 0.50 0.0 5354402 ●CSVG11FR/LV040 .016 0.40 .006 0.15 .020 0.50 0.0 5344932 ○CSVG11FR/LV045 .018 0.45 .018 0.45 .039 1.00 0.0 5354394 ●CSVG11FR/LV050 .020 0.50 .018 0.45 .039 1.00 0.0 5354642 ●CSVG11FR/LV055 .022 0.55 .018 0.45 .039 1.00 0.0 5344924 ○CSVG11FR/LV060 .024 0.60 .018 0.45 .039 1.00 0.0 5344916 ●CSVG11FR/LV065 .026 0.65 .018 0.45 .039 1.00 0.0 5354410 ○CSVG11FR/LV070 .028 0.70 .018 0.45 .039 1.00 0.0 5354428 ●CSVG11FR/LV075 .030 0.75 .050 1.40 .079 2.00 0.0 5332812 ● ○ 5332820CSVG11FR/LV080 .031 0.80 .050 1.40 .079 2.00 0.0 5358650 ○CSVG11FR/LV085 .033 0.85 .050 1.40 .079 2.00 0.0 5354436 ○CSVG11FR/LV090 .035 0.90 .050 1.40 .079 2.00 0.0 5354444 ○CSVG11FR/LV095 .037 0.95 .050 1.40 .079 2.00 0.0 5332846 ● ○ 5332838CSVG11FR/LV100 .039 1.00 .050 1.40 .079 2.00 0.0 5352562 ●CSVG11FR/LV110 .043 1.10 .102 2.60 .118 3.00 0.0 5358643 ○CSVG11FR/LV120 .047 1.20 .102 2.60 .118 3.00 0.0 5352570 ● ○ 5357561CSVG11FR/LV130 .051 1.30 .102 2.60 .118 3.00 0.0 5358627 ●CSVG11FR/LV140 .055 1.40 .102 2.60 .118 3.00 0.0 5358619 ○CSVG11FR/LV150 .059 1.50 .102 2.60 .118 3.00 0.0 5358601 ○

1/4"

(6.35)

w

L

＋.001"

－0


■CSVR/L

■CSVG - Grooving

■CSVR/L-NC

AA .787（20）

.004

（0.1）

１°

AA １°

.787（20）

.004

（0.1）


AA

.787（20）

0.0

１°

φ



screw Wrench Right-hand Left-hand(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock Stock Order Code



screw Wrench Right-hand Left-hand(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock Stock Order Code

CSV..11..


DS-CSVL (Inch)Gage Insert Item number φ Clamp screw Wrench Order Code Stock(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜)CSV..11..FR DS-CSVL15 5/8" .591 15 4.724 120 .394 10 LRIS-2.5×7 CLR-15S 5572664 ●

Gro

ovin

g

70

Grooving

FGV / FBV (Saturn Duo) - Face Grooving Inserts

Item numberI.C. Thickness TM4

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock

Right-Hand Insert

.039" 1.0 FGV100RB00D6 1/4" 6.35 3/32" 2.38 .059" 1.5 .000" 0.00 .236" 6.0 5704580 ○

.039" 1.0 FGV100RB05D6 1/4" 6.35 3/32" 2.38 .059" 1.5 .002" 0.05 .236" 6.0 5704606 ○

.059" 1.5 FGV150RB00D6 1/4" 6.35 3/32" 2.38 .079" 2.0 .000" 0.00 .236" 6.0 5704614 ○

.059" 1.5 FGV150RB05D6 1/4" 6.35 3/32" 2.38 .079" 2.0 .002" 0.05 .236" 6.0 5704622 ○

.079" 2.0 FGV200RB00D6 1/4" 6.35 3/32" 2.38 .118" 3.0 .000" 0.00 .236" 6.0 5704630 ○

.079" 2.0 FGV200RB05D6 1/4" 6.35 3/32" 2.38 .118" 3.0 .002" 0.05 .236" 6.0 5704648 ○

Left-Hand Insert

.039" 1.0 FGV100LB00D6 1/4" 6.35 3/32" 2.38 .059" 1.5 .000" 0.00 .236" 6.0 5704572 ○

.039" 1.0 FGV100LB05D6 1/4" 6.35 3/32" 2.38 .059" 1.5 .002" 0.05 .236" 6.0 5704564 ○

.059" 1.5 FGV150LB00D6 1/4" 6.35 3/32" 2.38 .079" 2.0 .000" 0.00 .236" 6.0 5704556 ○

.059" 1.5 FGV150LB05D6 1/4" 6.35 3/32" 2.38 .079" 2.0 .002" 0.05 .236" 6.0 5704549 ○

.079" 2.0 FGV200LB00D6 1/4" 6.35 3/32" 2.38 .118" 3.0 .000" 0.00 .236" 6.0 5704531 ○

.079" 2.0 FGV200LB05D6 1/4" 6.35 3/32" 2.38 .118" 3.0 .002" 0.05 .236" 6.0 5704523 ○

Item numberI.C. Thickness TM4

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock

.020" 0.5 FBV40R05D8AM3 1/4" 6.35 3/32" 2.38 .157" 4.0 .002" 0.05 .315" 8.0 5697453 ○

.020" 0.5 FBV40R15D8AM3 1/4" 6.35 3/32" 2.38 .157" 4.0 .006" 0.15 .315" 8.0 5697461 ○

w

wrεrε

w

w

I.C.

■FGV

■FBV




w

I.C.


Width Tolerance w±.001"

Gro

ovin

g

71

FGV / FBV (Saturn Duo) - Tool Holders

AA

BB

Holder: LHInsert: LH

Holder: RHInsert: RH


AA

0.0

11.0

Holder: LHInsert: LH



Gage Insert Item number Clamp


(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock Stock Order Code

FGV...LFGVR1016 — — .413 10 0.0 .630 16 4.724 120 .787 20 0.0 LRIS-2.5 × 7 CLR-15S 5691035 ○ — —FGVR1216 — — .472 12 0.0 .630 16 4.724 120 .787 20 0.0 LRIS-2.5 × 7 CLR-15S 5691043 ○ — —FGVR1616 — — .630 16 0.0 .630 16 4.724 120 .787 20 0.0 LRIS-2.5 × 7 CLR-15S 5691050 ○ — —

FGVFBV

DS-FGV 19 3/4" .709 18 — — .709 18 4.724 120 — — .118 3.0 LRIS-2.5 × 7 CLR-15S 5690938 ○ ○ 5690946DS-FGV 20 .787 20 .748 19 — — .748 19 4.724 120 — — .118 3.0 LRIS-2.5 × 7 CLR-15S 5690953 ○ ○ 5690961DS-FGV 22 .866 22 .827 21 — — .827 21 4.724 120 — — .118 3.0 LRIS-2.5 × 7 CLR-15S 5690979 ○ ○ 5690987DS-FGV 25 1" .965 24.5 — — 24.5 4.724 120 — — .118 3.0 LRIS-2.5 × 7 CLR-15S 5690995 ○ ○ 5691001

FGVFBV

CH-FGV 1010 — — .413 10 .394 10 .394 10 4.724 120 .709 18 .413 10.5 LRIS-2.5 × 7 CLR-15S 5691068 ○ ○ 5691076CH-FGV 1212 — — .472 12 .472 12 .472 12 4.724 120 .709 18 .492 12.5 LRIS-2.5 × 7 CLR-15S 5691084 ○ ○ 5691100CH-FGV 1616 — — .630 16 .630 16 .630 16 4.724 120 .709 18 .650 16.5 LRIS-2.5 × 7 CLR-15S 5691118 ○ ○ 5691134

■FGV

■DS-FGV

■CH-FGV


Square shank tool holders for gang type tool posts (Designed exclusively for LEFT-hand FGV inserts)

Round shank tool holders for drill sleeves

Square shank tool holders for FGV and FBV inserts




Note: Right-hand tool holders take LEFT-hand inserts for this style.

Gro

ovin

g

73

Threading

Thre

adin

g

74

Threading

Thread Whirling System

➡Page 80

Inserts TW..For high performance threading

SBT

➡Page 91

Applicable Pitch 36 to 16 TPIL1 .031" to .071"Solid carbide bars

CSV

➡Page 78

Applicable Pitch 125 to 51 TPIL1 .118"CSVT11..

For super-fine threads

TTP DS-TTP

➡Page 76, 77 ➡Page 76, 77

Applicable Pitch 125 to 13 TPIL1 .217"

TTP..FR/L..

■ OD Threading

■ ID Threading

NTK Threading Tool - Product Lines◦ Sharp cutting edge brings burr-free finish.◦ Wide coverage in pitch range.

L1

Ｐ（Pitch）L1

Ｐ（Pitch）

Thre

adin

g

75

■ Metric (M) Threads / Fine and CoarseThread Type Pitch (mm)

2.00 1.50 1.25 1.00 0.80 0.75 0.70 0.50 0.40 0.35 0.25 0.20 M1 Coarse FineM2 Coarse FineM3 Coarse FineM4 Coarse FineM5 CoarseM6 Coarse

Fine

M7M8 Coarse

Fine

M9M10 Coarse Fine

M11M12

Fine

FineM14 CoarseM15

M16 CoarseM17

M18

FineM20

M22M24

M25M26

M27

Fine FineM28M30

M32

TTP60F -N02 can be used up to M150 when the pitch is 2.0 mm.

Inserts Pitch (mm)TTP60F 4A,AS（B,BS） 0.2-0.75TTP60F 8A,AS（B,BS） 0.4-1.25TTP60F -N（S） 1.0-1.5TTP60F -N02 1.5-2.0

Covered Thread Pitch Range (mm)

TTP Style

Thread Type Pitch(mm) Applicable Inserts

Coarse (UN

C)

No.1-64 UNC 0.3969 TTP60F 4A, AS（B, BS）No.2-56 UNC 0.4536

TTP60F 4A, AS（B, BS）TTP60F 8A, AS（B, BS）

No.3-48 UNC 0.5292 No.4-40 UNC 0.6350 No.5-40 UNC 0.6350 No.6-32 UNC 0.7938

TTP60F 8A, AS（B, BS）No.8-32 UNC 0.7938 No.10-24 UNC 1.0583

TTP60F 8A, AS（B, BS）TTP60F -N（S）

No.12-24 UNC 1.0583 1/4-20 UNC 1.2700 5/16-18 UNC 1.4111 TTP60F -N（S）3/8-16 UNC 1.5875

TTP60F -N027/16-14 UNC 1.8143 1/2-13 UNC 1.9538

■ Unified Standard (UN, UNF, UNC) Threads

Thread Type Pitch(mm) Applicable Inserts

Fine (UN

F)

No.0-80 UNF 0.3175 TTP60F 4A, AS（B, BS）No.1-72 UNF 0.3528

No.2-64 UNF 0.3969 No.3-56 UNF 0.4536

TTP60F 4A, AS（B, BS）TTP60F 8A, AS（B, BS）

No.4-48 UNF 0.5292 No.5-44 UNF 0.5773 No.6-40 UNF 0.6350 No.8-36 UNF 0.7056 No.10-32 UNF 0.7938

TTP60F 8A, AS（B, BS）No.12-28 UNF 0.9071 1/4-28 UNF 0.9071 5/16-24 UNF 1.0583 TTP60F 8A, AS（B, BS）

TTP60F -N（S）3/8-24 UNF 1.0583 7/16-20 UNF 1.2700

TTP60F -N（S）1/2-20 UNF 1.2700 9/16-18 UNF 1.4111 5/8-18 UNF 1.4111 3/4-16 UNF 1.5875

TTP60F -N027/8-14 UNF 1.8143

Thre

adin

g

76

Threading

TTP Series - Inserts

Pitch range Item number Edgeconfig.

QM3 ZM3Pitch(㎜) TPI (Inch) (㎜) (Inch) (㎜) Order Code R L Order Code Order Code R L Order Code

60° 0.2～0.75 127～34 TTP60FR/L4A A .016 0.4 .002MAX Flat

0.05MAX Flat 5234216 ● ○ 5601307 5145602 ● ● 5145594

60° 0.2～0.75 127～34 TTP60FR/L4B B .016 0.4 .002MAX Flat

0.05MAX Flat 5601315 ● ○ 5601299 5145586 ● ● 5145578

60° 0.5～1.25 50～21 TTP60FR/L8A A .031 0.8 R.002 0.05 5337340 ● ○ 5601273 5145537 ● ● 5145545

60° 0.5～1.25 50～21 TTP60FR/L8B B .031 0.8 R.002 0.05 5506472 ● ○ 5503438 5145529 ● ● 5145511

60° 1.0～1.5 25～17 TTP60FR/L-N N .049 1.25 R.004 0.10 5474630 ● ○ 5601265 5145560 ● ● 5145552

60° 1.5～2.0 16 ～13 TTP60FR/L-N02 N .049 1.25 R.008 0.20 5626254 ● ○ 5626262

55° 0.2～0.75 127～34 TTP55FR/L8A A .031 0.8 R.002 0.05 5145495 ● ● 5145503

55° 0.2～0.75 127～34 TTP55FR/L8B B .031 0.8 R.002 0.05 5145487 ● ● 5145479

Right Hand Tool Holders Left Hand Tool Holders

Toolholder TTPR Toolholder TTPR Toolholder TTPL Toolholder TTPL

Insert TTP..FR..A Insert TTP..FR..B Insert TTP..FL..B Insert TTP..FL..A

Edge Shape：A type

Edge Shape：A type

Edge Shape：B type

Edge Shape：B type

Guide Bushing

with flat with radius


■TTP

.780（20.0）

50°

.980

（2.5）

θ°θ°

θ°

Edge Shape

［A type］

［B type］

［N type］

.310

（8.0）


Thre

adin

g

77


TTP Series - Tool Holders

■TTP

■DS-TTPL

Screw accessible from both side

.276(7)4.724(120)

.591(15)

.256(6.5)

Max. shoulde

r clearance

LeftHand

RightHand

.217(5.5)

0.0

.787(20)

φ


(Inch, Metric)Gage Insert Item number Clamp


(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock Stock Order Code

TTP55FR/LTTP60FR/L

TTPR/L06-IN 3/8" 3/8" 3/8" .079 2 LRIS-4×10PW CLR-15S 5291125 ● ● 5487426TTPR/L08-IN 1/2" 1/2" 1/2" 0 LRIS-4×12PW CLR-15S 5291133 ● ● 5350285TTPR/L10-IN 5/8" 5/8" 5/8" 0 LRIS-4×12PW CLR-15S 5574900 ● ● 5574918

TTP55FR/L..TTP60FR/L..

TTPR/L08 .315 8 .394 10 .315 8 .157 4 LRIS-4×10PW CLR-15S 5146238 ● ● 5146220TTPR/L12 .472 12 .472 12 .472 12 0 LRIS-4×10PW CLR-15S 5145701 ○ ○ 5145719TTPR/L16 .630 16 .630 16 .630 16 0 LRIS-4×10PW CLR-15S 5191234 ○ ○ 5267190

(Metric, ㎜)GageInsert Item number

φ Clampscrew Wrench OrderCode Stock


TTP55FR..TTP60FR..

DS-TTPL19 3/4" .709 18 4.724 120 .394 10 LRIS-4×10 LLR-25S 5278270 ●DS-TTPL20 .787 20 .748 19 4.724 120 .394 10 LRIS-4×10 LLR-25S 5278296 ●DS-TTPL22 .866 22 .827 21 4.724 120 .394 10 LRIS-4×10 LLR-25S 5324033 ●DS-TTPL25 1" .945 24 5.906 150 .394 10 LRIS-4×10 LLR-25S 5317151 ●


Thre

adin

g

78

Threading



Note: All angles shown are obtained when insert is set on the holder.All images in this page show right-hand inserts.


■CSVT - Threading

Item number Chipbreaker Pitch range VM1(Inch) (㎜) Order Code R L Order Code

CSVT11FR/LP60-035A No 125 TPI ～ 51 TPI .001MAX 0.03MAX 5344874 ● ● 5386909CSVT11FR/LP60-035B No 125 TPI ～ 51 TPI .001MAX 0.03MAX 5344882 ● ● 5386917

.014±.001

(1.0)

.039

60°

1/4"

（6.35）

.014±.001

(1.0)

.039

60°

type A

type B




AA .787（20）

.004

（0.1）

１°

AA １°

.787（20）

.004

（0.1）

AA

.787（20）

0.0

１°

φ









CSV..11..




Thre

adin

g

80

Thread Whiring

NTK’s Unique Attachment System

①Loosen the Mounting Bolts. ② Rotate the Insert Holder to 10 degrees. ③ Pull the Whirling Insert Holder without pull out the Mounting Bolts.

Insert HolderMount Adapter

InsertInsert Holder Mounting Bolt

NTK’s whirling insert holder can be attached and detached without removing mounting bolts.

Adapter Mounting Bolt

◦Reduce cycle time by more than half.*◦ 6.5㎜ (.256") thick inserts accommodate

large pitch and lead.

* Applies to cycle time for thread whirling only. Does not apply to total cycle time. Actual results may vary.

◦Dramatically improved producitivity in thread forming operations.

◦NTK's unique design technology (patented) makes precise and correct inserts possible without any redesign and remake.

◦Excellent surface finish and longer tool life than competitors'.

◦Sharp cutting edge for reduced tool pressure and superior chip control.

Features

Form multiple-lead threads in a single-pass.

Double-lead threads Triple-lead threads

Work Bone screw Worm gear

Work material Ti-6Al-4V ELI brass

Work appearance

Insert appearance

Major Dia. φ.157"(4.0㎜) φ.278"(7.0㎜)

Minor Dia. φ.094"(2.4㎜) φ.185"(4.7㎜)

Pitch φ.135"(3.42㎜) φ.193"(4.9㎜)

Patented

Mutiple-Lead Thread Whirling

NTK Thread Whiring - Nonstop improvement to meet tighter-than-ever demands from quality-oriented customers.

Thre

adin

g

81

NTK thread whirling inserts are all made to order (except for the ISO style threads shown below). Please follow the procedure to order correct NTK thread whirling systems and inserts.

Thread whirling order procedure

Recommended Cutting ConditionsRecommended cutting conditions

Whirling cutter RPM Main spindle RPM Feed Rate

1,000-4,000 min－1 10-30 min－1 Same as thread pitch（for single-lead threads）

Typical worksDiameter Work Materials

φ0.118 to φ0.394 inch（For cutters with 12㎜ ID.）

Titanium, Titanium alloy,316 Stainless

Standard thread whirling inserts for ISO style threads.

Item Number e P r4 r5Thread type Callout

ZM3Order Code Stock

TW5835-HA1.5-D12 1.5 0－0.15 1.1 0－0.1 0.1 0.5 0.3 0.1 35° 3° HA1.5

ISO5835

5818356 ○

TW5835-HA2.0-D12 2.0 0－0.15 1.3 0－0.1 0.1 0.6 0.4 0.1 35° 3° HA2.0 5818349 ○

TW5835-HA2.7-D12 2.7 0－0.15 1.9 0－0.15 0.1 1 0.6 0.2 35° 3° HA2.7 5818323 ○

TW5835-HA3.5-D12 3.5 0－0.15 2.4 0－0.15 0.1 1.25 0.8 0.2 35° 3° HA3.5 5818315 ○

TW5835-HA4.0-D12 4.0 0－0.15 2.9 0－0.15 0.1 1.5 0.8 0.2 35° 3° HA4.0 5818307 ○

TW5835-HA4.5-D12 4.5 0－0.15 3.0 0－0.15 0.1 1.75 1 0.3 35° 3° HA4.5 5818281 ○

TW5835-HA5.0-D12 5.0 0－0.15 3.5 0－0.15 0.1 1.75 1 0.3 35° 3° HA5.0 5818273 ○

TW5835-HB4.0-D12 4.0 0－0.15 1.9 0－0.15 0.1 1.75 0.8 0.3 25° 5° HB4.0 5818265 ○

TW5835-HB6.5-D12 6.5 0－0.15 3.0 0－0.15 0.2 2.75 1.2 0.8 25° 5° HB6.5 5818257 ○

TW9268-HC2.9-D12 2.79 to 2.9 2.03 to 2.18 0.1max 1.06 ― ― ― ― HC2.9

ISO9268

5818240

TW9268-HC3.5-D12 3.43 to 3.53 2.51 to 2.64 0.1max 1.27 ― ― ― ― HC3.5 5818232

TW9268-HC3.9-D12 3.78 to 3.91 2.77 to 2.92 0.1max 1.27 ― ― ― ― HC3.9 5818224

TW9268-HC4.2-D12 4.09 to 4.22 2.95 to 3.25 0.1max 1.27 ― ― ― ― HC4.2 5818216

TW9268-HD4.0-D12 4.0±0.03 2.92±0.03 0.1 1.59 ― ― 45° 10° HD4.0 5818208

TW9268-HD4.5-D12 4.5±0.03 2.92±0.03 0.1 2.18 ― ― 45° 10° HD4.5 5818190

Screw headScrew head

60° Screw head

ISO5835 HA ISO5835 HB ISO9268 HC ISO9268 HD

(Note: Must be used with thread whirling cutters with 12㎜ φDm dimension. See next page to find φDm for each cutter.)


⑴　 Fill out the NTK Thread Whirling Quote Request Form. (The form is available at www.ntkcuttingtools.com/whirling)⑵　 Send the form and a full part drawing to NTK by e-mail ([email protected]) or by fax (see the back cover).⑶　The quote for NTK thread whirling tooling will be issued through your local NTK distributor.⑷　Use the item numbers shown in the quote to place an order.⑸　 After NTK thread whirling tooling arrived, make sure to use the helix angle provided by NTK to set up, and run your jobs.

Thre

adin

g

82

P.C.D. P.C.D.

φ φ φ φ

P.C.D.

φ φ

P.C.D. P.C.D.

φ φ φ φ

P.C.D.

φφ

φ φ P.C.D.

φ φ

Type 1 Type 3Type 2

Type 4 Type 5 Type 6

Thread Whiring

Thread Whiring System

Spare Insert Holder (Cartridge)

Item Number Order Code No. of tooth φ Compatible cutters

TWC6HP2 5755988 6 12 For Type 2 and Type 3＊

TWC9HP2 5699962 9 12 For Type 2 and Type 3＊

TWC9HP2-D16 5756762 9 12 For Type 6

MachineMake Model Location Spindle

Make Spindle Model Helix angle NTKThread whirling system Order code Type No. of

tooth φ Mount adapter bolt

CITIZEN

A20

Gang CITIZEN

BTW-2000 ±25°

TWC9C1040HP1TWC6C1040HP1

57209665762737 1 9

6φ12φ12

M3（Provided with spindle）

C32

BTW-1000 ±25°

L20M20 ＋20°～－25°M32 ±25°

C12/16 Gang

CITIZEN

LTR0170

±15° TWC9C1037P2 5703368 2 9 φ12 CS0310（M3） 5770763M12/16

TurretLTR0168

M12/16Ⅲ MSW105 M20/32Ⅲ KSW110

L20 Gang

CITIZENLTR0183

±15° TWC9J1040P2 5699947 2 9 φ12 H-M4×12 5703392M20/32 M20/32 Turret LTR0169

L20 GangPCM

LSW-101-L20 ±10° TWC9P1340P2 5699921 2 9 φ12 M4

（Provided with spindle）M12/16Turret

MSW-101M20/M32 KSW-101

STAR

ECAS-12/20Attachment

STAR

54178 ±10°

TWC9S1640P2 5699863 3 9 φ12 CS04148S（M4） 5702212

SR-20J/20RⅢ 54172 －20°～0°（＊）ECAS-20T

Turret

59172 ±20°ECAS-32T 58171 ±10°

ST-38 43156 ±10°SV-12 45172 ±10°SV-20 42173 ±10°SV-32 43172 ±10°

TSUGAMI

BH20/BH38 Turret TSUGAMI 3263-Y481 ±10° TWC9TS2252P2 5724174 3 9 φ12 CS0515（M5） 5442199 BS20 Attachment TSUGAMI 3214-Y1371 ±10° TWC9TS20550P2 5774674 3 9 φ16 CS0515（M5） 5442199

SS20/SS26/SS32

Attachment

TSUGAMI 3268-Y4510°～10° TWC9TS1952P2BK 5741533 3 9 φ12

CS0515（M5） 54421990°～20° TWC9TS1652P2BK 5741541 3 9 φ12

S205S206B0205

TSUGAMI

3281-Y451（Ｓ205・Ｓ206）

3220-Y6541（Ｂ0205）

0°～10° TWC9TS2244HP1 5779467 4 9 φ12CS0520（M5） 5426895

0°～20° TWC9TS1944HP1 5779459 4 9 φ120°～25° TWC9TS1644HP1 5779434 4 9 φ12

CS0515（M5） 54421990°～30° TWC9TS1044HP1 5779426 4 9 φ12

SS207 ─── TSUGAMI ─── 0°～15° TWC4TS3010HP1 5789698 5 4 φ7 For single-corner inserts only

TORNOS

DECO10/10a

Attachment TORNOS

305217

±15°

TWC6TO11542HP1 5823620 4 6 φ12

CS0410（M4）DECO13a/13e 307087

TWC9TO10540P2 5743265 3 9 φ12 DECO20a306101

DECO26aHASEGAWA JS-1W ─── HASEGAWA ─── 0°～20° TWC9HA22594P2 5786447 6 9 φ16 CS0620（M6） 5883764

＊：May not work for over 15 deg. helix angle.

Spare Parts

Description Item Number Order Code

Insert ScrewFor 4㎜ thick inserts FSI17-2.2×6.0 5683768For 6.5㎜ thick inserts FSI24-2.2×7.9 5786595Wrench T-07 5094917

Insert Holder Mounting Bolt CS0309-TＷ 5702196Note: Insert holder comes with insert screws and wrench.　　　Insert holder mouting bolt is not included.＊Cannot be used for TWC9TS20550P2.

Thre

adin

g

83

Application Examples

Worm screw ● Work Material：brassBar Stock Dia. φ₇ Number of start 2

Major Dia. φ₆ Helix Angle 10.1°

Minor Dia. φ₄ Hand of thread Left

Cutting conditionMain Spindle Speed

（min－1） 30 Speed of whirling cutter（min－1） 3,200

Lead=Feed（㎜/rev） 2.8

NTKThread Whirling

9-inserts25 sec

Single-point cutting 50 sec

NTK Thread Whirling reduced total cycle-time by half from single-point screw cutting.

Bone screw ● Work Material：316 StainlessBar Stock Dia. φ₈ Number of start 1Major Dia. φ3.45 Helix Angle 7.5°Minor Dia. φ2.67 Hand of thread Right



Pitch=Feed（㎜/rev） 1.24

NTKThread Whirling

9-inserts2600 pcs/coner

Competitor's Thread Whirling 6-inserts 　1000 pcs/coner

NTK thread whirling resulted up to 2.6 times better tool life than competitor's.

Pin ● Work Material：HastelloyBar Stock Dia. φ₃ Number of start 1

Major Dia. φ1.5 Helix Angle 4.3°

Minor Dia. φ1.1 Hand of thread Right




NTKThread Whirling


Single-point cutting 　100 pcs/coner

NTK Thread Whirling offered long tool life for hard-to-cut material "Hastelloy".

Bone screw ● Work Material：316 StainlessBar Stock Dia. φ6.35 Number of start 1Major Dia. φ3.23 Helix Angle 8.5°Minor Dia. φ2.2 Hand of thread Right




NTKThread Whirling


Competitor's Thread Whirling 12-inserts 1000 pcs/coner

Competitor's Thread Whirling 3-inserts 　400 pcs/coner

NTK thread whirling resulted up to 3 times better tool life than competitor's.

Applicable Thread Geometry (Approximated)

●Helix Angle～About 30°　（Subject to machine and spindle specifications.）

●Thread Height～About 0.098 inch

●Pitch～About 0.138 inch●Depth of Cut～About 0.157 inch per side

●Number of threads Acceptable　as the situation demands

●Bar Stock Diameter　～Aboutφ0.394 inch　（For cutters with 12mm ID.）

The geometries shown above are approximated and could vary by actual applications.

Thre

adin

g

85

ID Tooling

ID T

oolin

g

86

ID Tooling

NTK ID Tooling - Product Lines

"S" chip breaker

Sharp cutting edge

"H" Flat type

Polished edge

"F" chip breaker

Evacuates chips BACKWARD.

Stick Duo Hyper comes with superior repeatability than conventional Stick Duo.

SHFS (Solid carbide bars)

Min. Bore Dia. φ.039" to φ.091"

Hyper

Stick Duo Hyper comes with superior repeatability than conventional Stick Duo.

SHFB (Solid carbide bars)

Min. Bore Dia. φ.039" to φ.244"

Hyper

LBMA/LBMA-S CH-LBM DS-LBMB

Min. Bore Dia.φ.039" to φ.091"



■ Minimum Bore Diameter: φ.039" to .323" Solid Carbide Type

➡Page 94, 95 ➡Page 94, 95➡Contact NTK for detail

➡Page 88

➡Page 89

ID T

oolin

g

87

SBG

➡Page 90

Blade width .020" to .079"Depth of cut .032" to .087"Min. Bore Dia. φ.118"

■ Minimum Bore Diameter: φ.197" - MogulBar - Boring bars with indexable inserts.

C-STUC/P (Carbide shank) S-STUC/P (Steel shank) C-SCLP (Carbide shank) S-SCLP (Steel shank)


Min. Bore Dia.φ.315" to φ1.260"


Min. Bore Dia.φ.315" to φ1.260"

C-MBR (Carbide shank) S-MBR (Steel shank) C-SEXR (Carbide shank) S-SEXR (Steel shank)

Min. Bore Dia. φ.197" Min. Bore Dia. φ.197" Min. Bore Dia. φ.236" Min. Bore Dia. φ.236"

■ ID Grooving ■ ID Threading

SBT

➡Page 91

Applicable Pitch 36 to 16 TPIL1 .031" to .071"Solid carbide bars

➡Page 96 ➡Page 96 ➡Page 97 ➡Page 97

➡Page 100 ➡Page 100 ➡Page 98 ➡Page 98 ID T

oolin

g

88

ID Tooling

(Inch, Metric)

Item Number Min Bore Dia. Chipbreaker

Stock(Inch) (㎜) (Inch) (㎜) (㎜) (㎜) (㎜) (㎜) (㎜) (Inch) (㎜) Order Code TM4

SHFS020R005S .079" 2 .087" 2.2 50 10 0.9 1.8 0.25 .002" 0.05 Type S 5709548 ●SHFS025R005S .098" 2.5 .106" 2.7 50 12.5 1.15 2.3 0.30 .002" 0.05 Type S 5709563 ●SHFS025R015S .098" 2.5 .106" 2.7 50 12.5 1.15 2.3 0.30 .006" 0.15 Type S 5709571 ●SHFS030R005S .118" 3 .126" 3.2 50 15 1.4 2.7 0.40 .002" 0.05 Type S 5709589 ●SHFS030R015S .118" 3 .126" 3.2 50 15 1.4 2.7 0.40 .006" 0.15 Type S 5709597 ●SHFS035R005S .138" 3.5 .146" 3.7 60 17.5 1.65 3.2 0.40 .002" 0.05 Type S 5709605 ●SHFS035R015S .138" 3.5 .146" 3.7 60 17.5 1.65 3.2 0.40 .006" 0.15 Type S 5709613 ●SHFS040R005S .157" 4 .165" 4.2 60 20 1.9 3.6 0.45 .002" 0.05 Type S 5709621 ●SHFS040R015S .157" 4 .165" 4.2 60 20 1.9 3.6 0.45 .006" 0.15 Type S 5709639 ●SHFS050R005S .197" 5 .205" 5.2 70 25 2.4 4.5 0.50 .002" 0.05 Type S 5709647 ●SHFS050R015S .197" 5 .205" 5.2 70 25 2.4 4.5 0.50 .006" 0.15 Type S 5709654 ●

(Inch, Metric)



SHFS020R005H .079" 2 .087" 2.2 50 10 0.9 1.8 0.25 .002" 0.05 None 5709662 ●SHFS025R005H .098" 2.5 .106" 2.7 50 12.5 1.15 2.3 0.30 .002" 0.05 None 5709670 ●SHFS025R015H .098" 2.5 .106" 2.7 50 12.5 1.15 2.3 0.30 .006" 0.15 None 5709688 ●SHFS030R005H .118" 3 .126" 3.2 50 15 1.4 2.7 0.40 .002" 0.05 None 5709696 ●SHFS030R015H .118" 3 .126" 3.2 50 15 1.4 2.7 0.40 .006" 0.15 None 5709704 ●SHFS035R005H .138" 3.5 .146" 3.7 60 17.5 1.65 3.2 0.40 .002" 0.05 None 5709712 ●SHFS035R015H .138" 3.5 .146" 3.7 60 17.5 1.65 3.2 0.40 .006" 0.15 None 5709720 ●SHFS040R005H .157" 4 .165" 4.2 60 20 1.9 3.6 0.45 .002" 0.05 None 5709738 ●SHFS040R015H .157" 4 .165" 4.2 60 20 1.9 3.6 0.45 .006" 0.15 None 5709746 ●SHFS050R005H .197" 5 .205" 5.2 70 25 2.4 4.5 0.50 .002" 0.05 None 5709753 ●SHFS050R015H .197" 5 .205" 5.2 70 25 2.4 4.5 0.50 .006" 0.15 None 5709761 ●

5°

5°

■SHFS-S type（for ID Boring） / Minimum Boring Diameter .087" （2.2㎜）

■SHFS-H type（for ID Boring） / Minimum Boring Diameter .087" （2.2㎜）

5°

5°

PolishedFinish

ID T

oolin

g

89

(Inch, Metric)



SHFB020R005F .087" 2 .087" 2.2 50 8 0.95 1.8 0.25 .002" 0.05 Type F 5709779 ●SHFB025R005F .098" 2.5 .106" 2.7 50 12.5 1.2 2.3 0.30 .002" 0.05 Type F 5709787 ●SHFB025R015F .098" 2.5 .106" 2.7 50 12.5 1.2 2.3 0.30 .006" 0.15 Type F 5709795 ●SHFB030R005F .118" 3 .126" 3.2 50 15 1.4 2.7 0.45 .002" 0.05 Type F 5709803 ●SHFB030R015F .118" 3 .126" 3.2 50 15 1.4 2.7 0.45 .006" 0.15 Type F 5709811 ●SHFB035R005F .138" 3.5 .146" 3.7 60 17.5 1.65 3.2 0.50 .002" 0.05 Type F 5709829 ●SHFB035R015F .138" 3.5 .146" 3.7 60 17.5 1.65 3.2 0.50 .006" 0.15 Type F 5709837 ●SHFB040R005F .157" 4 .165" 4.2 60 20 1.9 3.6 0.50 .002" 0.05 Type F 5709845 ●SHFB040R015F .157" 4 .165" 4.2 60 20 1.9 3.6 0.50 .006" 0.15 Type F 5709852 ●SHFB050R005F .197" 5 .205" 5.2 70 25 2.4 4.5 0.70 .002" 0.05 Type F 5709860 ●SHFB050R015F .197" 5 .205" 5.2 70 25 2.4 4.5 0.70 .006" 0.15 Type F 5709878 ●

■SHFB-F type（for ID Boring） / Minimum Boring Diameter .087" （2.2㎜）

5°

2°30°

■Cutting Conditions

●ID Boring

Steel(Carbon steel, Alloy steel)

Stainless Steel(Excluding 303 SS)


Non-ferrous Metal(Brass, Aluminum, Copper)

Speed（SFM） 100-230 100-200 100-260 160-330

Feed（IPR） .0004 - .002

*Assuming depth of cut is .002" to .008"

Evacuate chips backward

See page 92 for sleeves.

ID T

oolin

g

90

ID Tooling

2°2°

±.001"

(Inch, Metric)

Item Number Min Bore Dia. Chip-breaker

Stock(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (㎜) (㎜) (㎜) (㎜) (㎜) (Inch) (㎜) Order Code ZM3

SBG030050RB .118" 3 .020" 0.50 .118" 3 50 9 1.3 2.7 0.8 .002" 0.05 Yes 5652821 ●SBG030075RB .118" 3 .030" 0.75 .118" 3 50 9 1.3 2.7 0.8 .002" 0.05 Yes 5652839 ●SBG030100RB .118" 3 .039" 1.00 .118" 3 50 9 1.3 2.7 0.8 .002" 0.05 Yes 5652847 ●SBG040050RB .157" 4 .020" 0.50 .157" 4 60 12 1.8 3.6 1.0 .002" 0.05 Yes 5652797 ●SBG040075RB .157" 4 .030" 0.75 .157" 4 60 12 1.8 3.6 1.0 .002" 0.05 Yes 5652805 ●SBG040100RB .157" 4 .039" 1.00 .157" 4 60 12 1.8 3.6 1.0 .002" 0.05 Yes 5652813 ●SBG050050RB .197" 5 .020" 0.50 .197" 5 70 20 2.3 4.5 1.2 .002" 0.05 Yes 5652854 ●SBG050100RB .197" 5 .039" 1.00 .197" 5 70 20 2.3 4.5 1.2 .002" 0.05 Yes 5652862 ●SBG050150RB .197" 5 .059" 1.50 .197" 5 70 20 2.3 4.5 1.2 .002" 0.05 Yes 5652870 ●SBG060100RB .236" 6 .039" 1.00 .236" 6 80 20 2.8 5.4 1.8 .002" 0.05 Yes 5704846 ●SBG060150RB .236" 6 .059" 1.50 .236" 6 80 20 2.8 5.4 1.8 .002" 0.05 Yes 5704838 ●SBG060200RB .236" 6 .079" 2.00 .236" 6 80 20 2.8 5.4 1.8 .002" 0.05 Yes 5704820 ●SBG080100RB .315" 8 .039" 1.00 .315" 8 80 20 3.8 7.3 2.2 .002" 0.05 Yes 5704895 ●SBG080150RB .315" 8 .059" 1.50 .315" 8 80 20 3.8 7.3 2.2 .002" 0.05 Yes 5704903 ●SBG080200RB .315" 8 .079" 2.00 .315" 8 80 20 3.8 7.3 2.2 .002" 0.05 Yes 5704911 ●

■SBG type（for ID Grooving） / Minimum Bore Diameter .118" （3.0㎜）


●Grooving

Steel(Carbon steel, Alloy steel)

Stainless Steel(Excluding 303 SS)


Non-ferrous Metals(Brass, Aluminum, Copper)

Speed（SFM） 65-160 65-160 100-200 160-260

Feed（in/rev）

ForGrooveWidth

（inch）

0.20" .0004 - .0025

0.30" .0004 - .0020

0.40" .0004 - .0016

0.60" .0004 - .0016


ID T

oolin

g

91

(Inch, Metric)

Item Number Min Bore Dia. Pitch range Stock(Inch) (㎜) (Inch) (㎜) Pitch(㎜) TPI (㎜) (㎜) (㎜) (㎜) (㎜) (Inch) (㎜) Order Code ZM3

SBT025M3R .098" 2.5 .098" 3.0 0.5 50 50 5.4 1.10 2.3 0.6 .002" Max Flat 0.05 Max Flat 5784459 ●SBT030M4R .118" 3.0 .118" 3.0 0.5-0.8 36-32 50 7.5 1.30 2.7 0.8 .002" Max Flat 0.05 Max Flat 5784467 ●SBT030M4RB .118" 3.0 .118" 3.0 0.5-0.8 36-32 50 7.5 1.30 2.7 0.8 .002" Max Flat 0.05 Max Flat 5658018 ●SBT035M5RB .138" 3.5 .138" 3.5 0.5-1.0 32-24 60 8.5 1.55 3.2 1.0 .002" Max Flat 0.05 Max Flat 5658117 ●SBT040M6RB .157" 4.0 .157" 4.0 0.75-1.25 28-20 60 10.5 1.80 3.6 1.2 R.002" R0.05 5658000 ●SBT050M8RB .197" 5.0 .197" 5.0 0.75-1.5 28-18 70 15.8 2.30 4.5 1.5 R.002" R0.05 5657994 ●SBT060M10RB .236" 6.0 .236" 6.0 0.75-1.75 24-16 80 18.4 2.80 5.4 1.8 R.002" R0.05 5685870 ●

■SBT type（for ID Threading） / Minimum Bore Diameter .118" （3.0㎜）


●Threading

For 600 - 1500 RPM Recommended Depth of Cut （DOC） for Each Pass

Metric Thread Number of Pass

Pitch（㎜） Total DOC（㎜） 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

0.5 0.3 0.06 0.05 0.05 0.04 0.04 0.03 0.02 0.01 ― ― ― ― ― ― ― ― ― ― ― ― ―0.7 0.43 0.06 0.06 0.06 0.05 0.05 0.05 0.04 0.03 0.02 0.01 ― ― ― ― ― ― ― ― ― ― ―0.75 0.46 0.06 0.06 0.06 0.05 0.05 0.04 0.04 0.04 0.03 0.02 0.01 ― ― ― ― ― ― ― ― ― ―0.8 0.49 0.06 0.06 0.06 0.05 0.05 0.04 0.04 0.04 0.03 0.03 0.02 0.01 ― ― ― ― ― ― ― ― ―1.0 0.62 0.07 0.07 0.06 0.06 0.05 0.05 0.05 0.04 0.04 0.04 0.03 0.03 0.02 0.01 ― ― ― ― ― ― ―1.25 0.76 0.07 0.07 0.07 0.07 0.07 0.06 0.06 0.06 0.05 0.05 0.04 0.03 0.03 0.02 0.01 ― ― ― ― ― ―1.5 0.92 0.07 0.07 0.07 0.07 0.07 0.07 0.06 0.06 0.06 0.05 0.05 0.05 0.04 0.04 0.03 0.03 0.02 0.01 ― ― ―1.75 1.09 0.07 0.07 0.07 0.07 0.07 0.07 0.06 0.06 0.06 0.06 0.06 0.05 0.05 0.05 0.05 0.04 0.04 0.03 0.03 0.02 0.01

UNF Thread Number of Pass

Pitch（TPI） Total DOC（inch） 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

36 0.43 .002" .002" .002" .002" .002" .002" .001" .001" .0008" .0004" ― ― ― ― ― ― ― ― ―32 0.49 .002" .002" .002" .002" .002" .001" .001" .001" .001" .0008" .0004" ― ― ― ― ― ― ― ―28 0.56 .003" .002" .002" .002" .002" .002" .001" .001" .001" .001" .001" .0008" .0004" ― ― ― ― ― ―24 0.66 .003" .002" .002" .002" .002" .002" .002" .002" .001" .001" .001" .001" .0008" .0004" ― ― ― ― ―20 0.78 .003" .003" .003" .003" .002" .002" .002" .002" .002" .002" .001" .001" .001" .001" .0008" .0004" ― ― ―18 0.87 .003" .003" .003" .003" .003" .002" .002" .002" .002" .002" .002" .002" .001" .001" .001" .0008" .0004" ― ―16 0.98 .003" .003" .003" .003" .003" .003" .003" .002" .002" .002" .002" .002" .002" .001" .001" .001" .001" .0008" .0004"

60°

For Tools with 3-4㎜Shank Diameter（ds）

For Tools with 5-6㎜Shank Diameter（ds）

gg


ID T

oolin

g

92

ID Tooling■HY-NBH / Toolholders　Available Shank Size .630" （16㎜） to .1" （25.4㎜） Diameter

Item Number Code Stockφ φ φ Clamp Screws

(Inch) (㎜) (Inch) (㎜) (㎜) (㎜) (㎜) (㎜) (㎜) ① ② ③HY-NBH02019K 5709969 ● .079" 2.0 3/4" 11 18 125 15 9.5 SS04045FS SS0406F SS0404FHY-NBH02519K 5709977 ● .098" 2.5 3/4" 11.5 18 125 15 9.5 SS04045FS SS0406F SS0404FHY-NBH03019K 5709985 ● .118" 3.0 3/4" 12 18 125 15 9.5 SS04045FS SS0406F SS0404FHY-NBH03519K 5709993 ● .138" 3.5 3/4" 12.5 18 125 20 12 SS04045FS SS0406F SS0404FHY-NBH04019K 5710009 ● .157" 4.0 3/4" 13 18 125 20 12 SS04045FS SS0406F SS0404FHY-NBH05019K 5710017 ● .197" 5.0 3/4" 14 18 125 20 12 SS04045FS SS0406F SS0404FHY-NBH02022K 5712773 ● .079" 2.0 .866" 22 11 21 125 15 9.5 SS04045FS SS0406F SS0404FHY-NBH02522K 5712799 ● .098" 2.5 .866" 22 11.5 21 125 15 9.5 SS04045FS SS0406F SS0404FHY-NBH03022K 5712831 ● .118" 3.0 .866" 22 12 21 125 15 9.5 SS04045FS SS0406F SS0404FHY-NBH03522K 5712856 ● .138" 3.5 .866" 22 12.5 21 125 20 12 SS04045FS SS0406F SS0404FHY-NBH04022K 5712872 ● .157" 4.0 .866" 22 13 21 125 20 12 SS04045FS SS0406F SS0404FHY-NBH05022K 5712914 ● .197" 5.0 .866" 22 14 21 125 20 12 SS04045FS SS0406F SS0404FHY-NBH02025K 5713003 ● .079" 2.0 1" 11 24 125 15 9.5 SS04045FS SS0406F SS0404FHY-NBH02525K 5713029 ● .098" 2.5 1" 11.5 24 125 15 9.5 SS04045FS SS0406F SS0404FHY-NBH03025K 5713045 ● .118" 3.0 1" 12 24 125 15 9.5 SS04045FS SS0406F SS0404FHY-NBH03525K 5713060 ● .138" 3.5 1" 12.5 24 125 20 12 SS04045FS SS0406F SS0404FHY-NBH04025K 5713086 ● .157" 4.0 1" 13 24 125 20 12 SS04045FS SS0406F SS0404FHY-NBH05025K 5713102 ● .197" 5.0 1" 14 24 125 20 12 SS04045FS SS0406F SS0404F

■Spare Parts

Item Description Item Number Order Code

Overhang Adjustment Ball Screw SS0812R 5715859

Ball Screw Fixture SS0808F 5715867

Clamp Screw Wrench LW-2 5666573

Note : Also available in 16㎜ , 20㎜ and 25㎜ shanks(φ ).

Please refer to φ to find correct-size inserts (bars).

4

201 3 2

φD1

φD

2

φh

h

L1

L2

L3

ID T

oolin

g

93

Installation Procedure

●Boring Tool Clamping Procedure

①Position the overhang adjustment ball screw to determine overhang amount.②Slide the ball screw fixture to secure the ball screw location.③Insert a boring bar (tool).

Note: Make sure to insert the boring bar correctly so that the rake faces toward the side where clamp screws are located.

**④Positioning Clamp Screw ⑤Clamp Screw ①Overhang Adjustment Ball Screw

③Boring Bar(Tool)

⑥Side Clamp Screw ②Ball Screw Fixture

④Secure the boring bar by tightening the positioning clamp screw. ▲

Recommended Clamping Torque:17.7 lb in** Make sure to clamp the boring bar so that flat surface of the bar makes proper contacts with clamp screws.

RakeClamp Screws Caution: Improper installation dramatically increases

the chance of chipping cutting edge.

Correct Incorrect

⑤Secure the boring bar by tightening the remaining clamp screws. ▲

Recommended Clamping Torque:17.7 lb in ⑥ Even if 4 and 5 cannot be applied due to tool clearance and layout, the tool can be used

only by using side clamp.Once the initial setup is complete, repeat the above procedures 3 thru 5 for each index.

Improper clamping of boring bar causes unstable centerline height and offset.

●When tool is installed upside down

Toolholder must be installed so that clamp screws and rake of the tool face toward the same side.

Rake

Clamp Screws

ID T

oolin

g

94

ID Tooling

LBM Series - Inserts

■LBMD-S

.472

（12.0）

.354(9.0)

.591(15.0)

.394

(10.0)

Max depth.049

（1.25）

.098

（2.5）

φ

2°

95°

Max depth of cut

〔Min bore dia.〕

LBMD1730FLPB05S LBMD2035FLPB05S

LBMD1020FLPB05S LBMD1430FLPB05S

LBMD2335FLPB05S shown

Polished

■LBM .774（18.9）

.354（9.0）Max. depth

.472

（12.0）

.378

（9.6）

.049

（1.25）

.098

（2.5）

θ1

φ〔Min bore diameter〕

θ2

Max. depth

Max. depth

.394

（10.0）

.394

（10.0）

〈Min. bore diameter φ.079（2.0）〉

〈Min. bore diameter φ.039（1.0）〉

Polished

Long type

Short type

(Inch, Metric)Min. bore dia. φ Item Number

Max.depthChipbreaker

VM1(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock.039" 1.0 LBMD 1020 FL PB05S .079 2.0 .002 0.05 Yes 5486592 ○.055" 1.4 LBMD 1430 FL PB05S .118 3.0 .002 0.05 Yes 5486600 ●.067" 1.7 LBMD 1730 FL PB05S .118 3.0 .002 0.05 Yes 5486618 ○.079" 2.0 LBMD 2035 FL PB05S .138 3.5 .002 0.05 Yes 5486626 ○.091" 2.3 LBMD 2335 FL PB05S .138 3.5 .002 0.05 Yes 5486634 ○

(Inch, Metric)Min. bore dia. φ Item Number Max.depth

1 2 ChipbreakerVM1

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock.039" 1.0 LBMD 1020 FL VB .079 2.0 95° 10° .000 0.00 Yes 5433222 ●.039" 1.0 LBMD 1020 FL PB05 .079 2.0 95° 10° .002 0.05 Yes 5433214 ●.079" 2.0 LBMD 2060 FL VB .236 6.0 95° 10° .000 0.00 Yes 5421888 ●.079" 2.0 LBMD 2060 FL PB05 .236 6.0 95° 10° .002 0.05 Yes 5421896 ●

●Stock ○1-2 week delivery

ID T

oolin

g

95

.591(15)

４．７２４（１２０）

AA

LBM Series - Tool Holders

■LBMA

■LBMA-S

■DS-LBMB

C.197(5)

AA

.591(15)

.591(15)

４．７２４（１２０）

４．７２４（１２０）

Note: DS-LBMBL holders take right hand inserts..394(10)

0.0

φｄ

A

LBMAR .. -S

LBMAR ..

Right-Hand shown

Right-Hand shown

Left-Hand shown

(Inch, Metric)GageInsert Item Number Clamp Screw Wrench Order Code Stock(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜)

LBM(C)3080LBMD(E)2060LBMD1020

LBMAR06-IN 3/8" 3/8" 3/8" .0" 0.0 LRIS-4 × 10PW CLR-15S 5521489 ●LBMAR08-IN 1/2" 1/2" 1/2" .0" 0.0 LRIS-4 × 12PW CLR-15S 5521463 ●LBMAR10-IN 5/8" 5/8" 5/8" .0" 0.0 LRIS-4 × 12PW CLR-15S 5574926 ●LBMAR08 .315" 8 .315" 8 .846" 21.5 .0" 0.0 LRIS-4 × 10 LLR-25S 5383476 ●LBMAR12 .472" 12 .472" 12 .846" 21.5 .0" 0.0 LRIS-4 × 12PW CLR-15S 5362199 ●

LBMD-S LBMAR10S .394" 10 .394" 10 .709" 18 .0" 0.0 LRIS-4 × 10PW RLR-15S 5486311 ○LBMAR12S .472" 12 .472" 12 .709" 18 .0" 0.0 LRIS-4 × 12PW RLR-15S 5486329 ○

(Inch, Metric)GageInsert Item Number φ

Clamp Screw Wrench Order Code Stock(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜)LBMD-S

LBM(C)3080LBME2060LBMD2060LBMD1020

DS-LBMBL16X .630" 16 .591" 15 3.740" 95 .236 6 LRIS-4 × 10PW RLR-15S 5359906 ○DS-LBMBL19 3/4" .709" 18 4.724" 120 .236 6 LRIS-4 × 10PW RLR-15S 5359898 ●DS-LBMBL20 .787" 20 .748" 19 4.724" 120 .236 6 LRIS-4 × 10PW RLR-15S 5359880 ●DS-LBMBL22 .866" 22 .827" 21 4.724" 120 .236 6 LRIS-4 × 10PW RLR-15S 5359872 ●DS-LBMBL25 1" .945" 24 5.906" 150 .236 6 LRIS-4 × 10PW RLR-15S 5393905 ●

Minimum bore diameter φ.039（1.0）-φ,0118（3.0）

Minimum bore diameter φ.039（1.0）-φ.091（2.3）

Note: Also available in 14㎜ , 25㎜ , 5/8" shanks(φ ).

ID T

oolin

g

96

ID Tooling

Bore diameter φ.197"(5.0㎜)～ Steel shank / Carbide shank

GageInsert Item number*

φ Min. bore Dia.φ φ

Std. corner radiusShape Clamp screw Wrench

Stock

（㎜） (inch) (㎜ ) （㎜）（㎜）（㎜）（㎜）（㎜）（㎜）（㎜）（inch）（㎜） Order Code R

MBL S06F−MBRD05−OH 6.0 .200" 5.0 5.7 80 2.5 13.5 9 — 2.5 0° —13° .0059" 0.15 Fig.1 LR—S—2×3.5 CLR—13S 5789888 ●

MBL C045F−MBRD05−OH 4.5 .200" 5.0 4.0 80 2.5 — 9 — 1.5 0° —13° .0059" 0.15 Fig.2 LR—S—2×3.5 CLR—13S 5789896 ●

MBL C06F−MBRD05−OH 6.0 .200" 5.0 5.7 80 2.5 18 9 — 1.5 0° —13° .0059" 0.15 Fig.3 LR—S—2×3.5 CLR—13S 5789904 ●

F1 chipbreakers evacuates chips BACKWARD(S-STUC style shown)

Note: F1 chipbreaker evacuates chips backward.

φ φ

φ

Fig.1

Steel shank（tapered type）

φ

φ φ

Carbide shank（tapered type）

φ

φ φ

Fig.2

Carbide shank（straight type）

10°

【Boring＋Face】

Fig.3

.008.004.008

.016

.024

.031

.039

.002Feed

No mark

(IPR)

(Inch)

D.O.C

.008.004.008

.016

.024

.031

.039

.002Feed (IPR)

(Inch)

D.O.C

F1

*For F1 chipbreaker, right-hand inserts fit to right-hand toolholder.

* "S" denotes steel shank, "C" denotes carbide shank.

■MBRD

■MBL

MogulBar for 75 deg Diamond ("MBL" style)

TM4 ZM3Item Number (㎜） (㎜） (Inch) (㎜） Order code Stock Order code Stock

MBL

L-hand shown

MBL 005 FL 3.6 1.0 .002" 0.05 5696018 ● 5161252 ○

MBL 015 FL 3.6 1.0 .006" 0.15 5696026 ● 5161245 ○

MBL-F1

R-hand shown

MBL 005 FR F1 3.6 1.0 .002" 0.05 5789763 ●

MBL 015 FR F1 3.6 1.0 .006" 0.15 5789771 ●


◦Right hand shown

ID T

oolin

g

97



Std. corner radius

Shape Clamp screw WrenchStock


ERGP52.. S08G−SEXRRT3D06−OH 8.0 .240" 6.0 7.7 90 3.0 15 15 10 3.0 0° —13° .008" 0.2 Fig.1 LR—S—2×3.7 CLR—13S 5789912 ●

ERGP52.. C05G−SEXRRT3D06−OH 5.0 .240" 6.0 4.0 90 3.0 － 11 10 1.5 0° —13° .008" 0.2 Fig.2 LR—S—2×3.7 CLR—13S 5789920 ●

ERGP52.. C06G−SEXRRT3D06−OH 6.0 .240" 6.0 5.7 90 3.0 20 11 10 1.5 0° —13° .008" 0.2 Fig.3 LR—S—2×3.7 CLR—13S 5789938 ●

F1 chipbreakers evacuates chips BACKWARD(S-STUC style shown)


■SEXR

■ERGP

MogulBar for 75 deg Diamond ("ERGP" style)Bore diameter φ.236"(6.0㎜)～ Steel shank / Carbide shank

◦Right hand shown

F1A2 R-handA2 L-hand

5/32"

（3.97）

1/16"（1.6）

.008.004.008

.016

.024

.031

.039

.002Feed (IPR)

(Inch)

D.O.C

.008.004.008

.016

.024

.031

.039

.002Feed (IPR)

(Inch)

D.O.C

.008.004.008

.016

.024

.031

.039

.002Feed (IPR)

(Inch)

D.O.C

8°

【Boring＋Face】f

φD

m

L1h

φdθ°

α°L3

L2

8°L4

φD

s

Steel shank（tapered type）

Fig.1

φ φφ

Carbide shank（straight type） Carbide shank（tapered type）

φ φ

φ

Fig.2 Fig.3

HandTM4 VM1 ZM3 XT3 C7X

ERGP-A2 Item Number ISO Item Number (Inch) (㎜） Order code Stock Order code Stock Order code Stock Order code Stock Order code Stock

L-hand shown

ERGP 52Y- FR-- A2 ERGHT 30102 FR A2 R .008 0.2 5696034 ○ 5375050 ○ 5899158 ○ 5658602 ○ 5689930 ○

ERGP 521- FR-- A2 ERGHT 30104 FR A2 R .016 0.4 5696067 ○ 5681846 ○

ERGP 52Y- FL-- A2 ERGHT 30102 FL A2 L .008 0.2 5696059 ○ 5306535 ○ 5889670 ○ 5659594 ○ 5689948 ○

ERGP 521- FL-- A2 ERGHT 30104 FL A2 L .016 0.4 5146063 ○

HandTM4

ERGP-F1 Item Number ISO Item Number (Inch) (㎜） Order code Stock

R-hand shown

ERGP 5204 FR-- F1 ERGHT 30101 FR F1 R .004 0.1 5793039 ●

ERGP 52Y- FR-- F1 ERGHT 30102 FR F1 R .008 0.2 5789789 ●

ERGP 521- FR-- F1 ERGHT 30104 FR F1 R .016 0.4 5789797 ●

Insert Geometry IC ThicknessERGP52.. 5/32" 3.97㎜ 1/16" 1.6㎜

*1 Applicable for low depth of cut with right hand A2 chipbreaker.*2 For F1 chipbreaker, R-hand inserts fit to R-hand toolholder.


◦Right hand shown


ID T

oolin

g

98

ID Tooling

Bore diameter .390"(10㎜)～ Steel shank / Carbide shank


5°

fφD

m

L1

h

L4

L3

L2

θ°

α°

φD

s

φd

fφD

m

L1 hL3

5°L4

φD

s

θ° L2

α°

φd

５°

◦Right hand shownNote: Use inserts shown on page 99.Fig.1 Fig.2

Steel shank Carbide shank

■SCLP

■SCLC

MogulBar (80° Rhombic positive type)

5°

fφD

m

L1

h

L4

L3

L2

θ°

α°

φD

s

φd

fφD

m

L1

h

φd

L3

5°L4

φD

s

θ° L2

α°

５°

◦Right hand shownFig.1 Fig.2






Stock


CP..62.. S06F−SCLPR04D07−OH 6.0 .280 7.0 5.75 80 3.5 14 17.0 12.0 2.5 ＋5°－9° .008 0.2 Fig.1 LR—S—2×3.7 CLR—13S 5770029 ●

CP..62.. S07G−SCLPR04D08−OH 7.0 .310 8.0 6.75 90 4.0 16 19.5 13.5 3.0 ＋5°－7° .008 0.2 Fig.1 LR—S—2×3.7 CLR—13S 5770037 ●

CP..21.5.. S08H−SCLPR06D10−OH 8.0 .390 10.0 7.7 100 5.0 20 22.0 16.0 3.0 ＋5°－10° .016 0.4 Fig.1 LR—S—2.5×6 CLR—15S 5770045 ●

CP..62.. C06H−SCLPR04D07−OH 6.0 .280 7.0 5.75 100 3.5 15.5 11.5 12.0 2.0 ＋5°－9° .008 0.2 Fig.2 LR—S—2×3.7 CLR—13S 5770136 ○

CP..62.. C07J−SCLPR04D08−OH 7.0 .310 8.0 6.75 110 4.0 17.5 13.0 13.5 2.0 ＋5°－7° .008 0.2 Fig.2 LR—S—2×3.7 CLR—13S 5770151 ○

CP..21.5.. C08K−SCLPR06D10−OH 8.0 .390 10.0 7.7 125 5.0 21.5 16.5 15.0 2.5 ＋5°－10° .016 0.4 Fig.2 LR—S—2.5×6 CLR—15S 5770169 ○




Stock


CC..21.5.. S08H−SCLCR06D10−OH 8.0 .390 10.0 7.7 100 5.0 20.0 22.0 16.0 3.0 0° —13° .016 0.4 Fig.1 LRIS—2.5×5 CLR—15S 5770052 ●

CC..21.5.. S10K−SCLCR06D12−OH 10.0 .470 12.0 9.6 125 6.0 24.0 27.5 20.0 3.5 0° －11° .016 0.4 Fig.1 LRIS—2.5×5 CLR—15S 5770060 ●

CC..21.5.. S12M−SCLCR06D14−OH 12.0 .550 14.0 11.5 150 7.0 28.0 32.5 23.0 4.0 0° －9° .016 0.4 Fig.1 LRIS—2.5×5 CLR—15S 5770078 ◦

CC..32.5.. S16Q−SCLCR09D18−OH 16.0 .630 18.0 15.4 180 9.0 36.0 42.5 30.0 5.0 0° －10° .016 0.4 Fig.1 LRIS—4×8 LLR—25S 5770086 ◦

CC..21.5.. C08K−SCLCR06D10−OH 8.0 .390 10.0 7.7 125 5.0 21.5 16.5 15.0 2.5 0° －13° .016 0.4 Fig.2 LRIS—2.5×5 CLR—15S 5770185 ◦

CC..21.5.. C10M−SCLCR06D12−OH 10.0 .470 12.0 9.6 150 6.0 25.0 20.0 19.5 2.5 0° —11° .016 0.4 Fig.2 LRIS—2.5×5 CLR—15S 5770193 ◦

CC..21.5.. C12M−SCLCR06D14−OH 12.0 .550 14.0 11.5 150 7.0 29.0 23.5 22.5 3.0 0° —9° .016 0.4 Fig.2 LRIS—2.5×5 CLR—15S 5770201 ◦


Note: Please refer to page 24 for available CC style inserts.

ID T

oolin

g

99

TM4 ZM3 C7X XT3CPGP/H-F1 Item Number ISO Item Number (Inch) (㎜） Order code Stock Order code Stock Order code Stock Order code Stock

Right hand shown

CPGP 6204 FR F1 CPGH 040101 FR F1 .004 0.1 5799457 ●

CPGP 6208 FR F1 CPGH 040102 FR F1 .008 0.2 5789805 ●

CPGP 621 FR F1 CPGH 040104 FR F1 .016 0.4 5696125 ●

CPGH 21.508 FR F1 CPGH 060202 FR F1 .008 0.2 5789821 ●

CPGH 21.51 FR F1 CPGH 060204 FR F1 .016 0.4 5789839 ●

TM4 ZM3 C7X XT3CPGH-AM5 Item Number ISO Item Number (Inch) (㎜） Order code Stock Order code Stock Order code Stock Order code Stock

CPGH 21.504 AM5 CPGH 060201 ENB AM5 .004 0.1 5579503 ●


CPGH 21.508 FN AM5* CPGH 060202 FN AM5 .008 0.2 5693213 ○ 5522297 ○


CPGH 21.51 FN AM5* CPGH 060204 FN AM5 .016 0.4 5781505 ●


TM4 ZM3 C7X XT3CPGP/H-A Item Number ISO Item Number (Inch) (㎜） Order code Stock Order code Stock Order code Stock Order code Stock

Left hand shown

CPGP 6208 FL A1* CPGH 040102 FL A1 .008 0.2 5155353 ○

CPGP 6208 L A1 CPGH 040102 TL A1 .008 0.2 5657598 ○

CPGP 621 FL A1* CPGH 040104 FL A1 .016 0.4 5146055 ○

CPGP 621 L A1 CPGH 040104 TL A1 .016 0.4 5657564 ○

CPGH 21.508 FL A* CPGH 060202 FL A .008 0.2 5076229 ○

CPGH 21.508 L A CPGH 060202 TL A .008 0.2 5533104 ○

CPGH 21.51 FL A* CPGH 060204 FL A .016 0.4 5255351 ○

CPGH 21.51 L A CPGH 060204 TL A .016 0.4 5533112 ○

Insert Geometry IC ThicknessCPGP62.. 3/16" 4.76㎜ 1/16" 1.59㎜CPGH21.5.. 1/4" 6.35㎜ 3/32" 2.38㎜CPGP83.. 1/4" 6.35㎜ 3/32" 2.38㎜

* F and FN denote sharp cutting edge without any edge preparations.



ID T

oolin

g

100

ID Tooling


φD

s

fφD

m

L3

L4

L1

θ°

L2

α°

3°

h

φd

φD

s

L1

fφD

m

L3

L4

α°

θ°

L2

3°φd

h

3°

Fig.3 Fig.4


■STUC（P）

MogulBar (60° Triangle positive type)





Stock


TC..52.. S07G−STUCR06D08−OH 7.0 .310 8.0 6.75 90 4.0 16 19.5 12.5 2.5 0° －11° .008 0.2 Fig.3 LR—S—2×4.4 CLR—13S 5769971 ●

TP..73.. S08H−STUPR09D10−OH 8.0 .390 10.0 7.7 100 5.0 20 22.5 14.5 3.0 ＋5°－10° .016 0.4 Fig.3 LR—S—2.5×4.8 CLR—15S 5769989 ●

TP..22.. S10K−STUPR11D12−OH 10.0 .470 12.0 9.6 125 6.0 24 27.5 18.5 3.5 ＋5°－7.5° .016 0.4 Fig.3 LR—S—3×5.8 RLR—20S 5769997 ●

TP..22.. S12M−STUPR11D14−OH 12.0 .550 14.0 11.5 150 7.0 28 32.5 22.0 4.0 ＋5°－5° .016 0.4 Fig.3 LR—S—3×5.8 RLR—20S 5770003 ○

TP..22.. S16Q−STUPR11D18−OH 16.0 .770 18.0 15.4 180 9.0 32 42.5 28.5 5.0 ＋5°－3° .016 0.4 Fig.3 LR—S—3×5.8 RLR—20S 5770011 ○

TC..52.. C07J−STUCR06D08−OH 7.0 .310 8.0 6.75 110 4.0 17.5 13.0 12.5 2.0 0° －11° .008 0.2 Fig.4 LR—S—2×4.4 CLR—13S 5770094 ○

TP..73.. C08K−STUPR09D10−OH 8.0 .390 10.0 7.7 125 5.0 21.5 16.5 14.5 2.5 ＋5°－10° .016 0.4 Fig.4 LR—S—2.5×4.8 CLR—15S 5770102 ○

TP..22.. C10M−STUPR11D12−OH 10.0 .470 12.0 9.6 150 6.0 25.0 20.0 17.5 2.5 ＋5°－7.5° .016 0.4 Fig.4 LR—S—3×5.8 RLR—20S 5770110 ○

TP..22.. C12M−STUPR11D14−OH 12.0 .550 14.0 11.5 150 7.0 29.0 23.0 21.5 3.0 ＋5°－5° .016 0.4 Fig.4 LR—S—3×5.8 RLR—20S 5770128 ○

◦Right hand shownNote: Use inserts shown on page 101.

ID T

oolin

g

101

TM4 ZM3 VM1 C7X XT3

TCGP-F05 Item Number ISO Item Number (Inch) (㎜） Order code Stock Order code Stock Order code Stock Order code Stock Order code Stock

Right-hand

TCGP 5204 FR F05 TCGH 060101 FR F05 .004 0.1 5793047 ●

TCGP 5208 FR F05 TCGH 060102 FR F05 .008 0.2 5695713 ● 5961099 ○ 5333273 ○

TCGP 5208 R F05 TCGH 060102 TR F05 .008 0.2 5689880 ○

TCGP 521 FR F05 TCGH 060104 FR F05 .016 0.4 5695721 ● 5947429 ○ 5456165 ○

TCGP 521 R F05 TCGH 060104 TR F05 .016 0.4 5689872 ○

TM4 ZM3 VM1 C7X XT3TPGP-FG Item Number ISO Item Number (Inch) (㎜） Order code Stock Order code Stock Order code Stock Order code Stock Order code Stock

Right-hand

TPGP 7308 R FG TPGH 090202 R FG .008 0.2 5790100 ●

TPGP 731 R FG TPGH 090204 R FG .016 0.4 5790092 ●

TPGH 2208 R FG TPGH 110302 R FG .008 0.2 5790142 ●

TPGH 221 R FG TPGH 110304 R FG .016 0.4 5790134 ●

TM4 ZM3 VM1 C7X XT3TPGP-F1 Item Number ISO Item Number (Inch) (㎜） Order code Stock Order code Stock Order code Stock Order code Stock Order code Stock

Right-hand

TPGP 7308 FR F1 TPGH 090202 FR F1 .008 0.2 5767686 ○ 5345210 ○

TPGP 7308 R F1 TPGH 090202 TR F1 .008 0.2 5689856 ○

TPGP 731 FR F1 TPGH 090204 FR F1 .016 0.4 5092093 ○ 5371190 ○

TPGP 731 R F1 TPGH 090204 TR F1 .016 0.4 5611553 ○

TPGP 732 FR F1 TPGH 090208 FR F1 .031 0.8 5132113 ○

TPGH 2208 FR F1 TPGH 110302 FR F1 .008 0.2 5065875 ○

TPGH 2208 R F1 TPGH 110302 TR F1 .008 0.2 5688536 ○

TPGH 221 FR F1 TPGH 110304 FR F1 .016 0.4 5978036 ○

TPGH 221 R F1 TPGH 110304 TR F1 .016 0.4 5688551 ○

TPGH 222 R F1 TPGH 110308 TR F1 .031 0.8 5688544 ○

TM4 ZM3 VM1 C7X XT3TCGP-B1 Item Number ISO Item Number (Inch) (㎜） Order code Stock Order code Stock Order code Stock Order code Stock Order code Stock

Left-hand shown

TCGP 5204 L B1 TCGH 060101 TL B1 .004 0.1 5682927 ●

TCGP 5208 FL B1 TCGH 060102 FL B1 .008 0.2 5695689 ○ 5101696 ○

TCGP 5208 L B1 TCGH 060102 TL B1 .008 0.2 5657523 ○

TCGP 5208 R B1＊ TCGH 060102 TR B1 .008 0.2 5657689 ○

TCGP 521 FL B1 TCGH 060104 FL B1 .016 0.4 5695697 ○ 5129002 ○

TCGP 521 L B1 TCGH 060104 TL B1 .016 0.4 5575014 ●

TM4 ZM3 VM1 C7X XT3TPGP-B2 Item Number ISO Item Number (Inch) (㎜） Order code Stock Order code Stock Order code Stock Order code Stock Order code Stock

Left-hand

TPGP 7308 FL B2 TPGH 090202 FL B2 .008 0.2 5918750 ○

TPGP 731 FL B2 TPGH 090204 FL B2 .016 0.4 5998596 ○

TPGP 732 FL B2 TPGH 090208 FL B2 .031 0.8 5255344 ○

TM4 ZM3 VM1 C7X XT3TPGH-B3 Item Number ISO Item Number (Inch) (㎜） Order code Stock Order code Stock Order code Stock Order code Stock Order code Stock

Left-hand

TPGH 2204 L B3 TPGH 110301 TL B3 .004 0.1 5703764 ●

TPGH 221 L B3 TPGH 110304 TL B3 .016 0.4 5687744 ●

TPGH 222 L B3 TPGH 110308 TL B3 .031 0.8 5816657 ●

Note ： Chips evacuate backwards.Use right-hand boring bars for right-hand inserts with F05 & F1 chipbreakers.＊Use left hand bars for this insert.

Insert Geometry IC ThicknessTCGP 52.. 5/32" 3.97㎜ 1/16" 1.59㎜TPGP 63.. 3/16" 4.76㎜ 3/32" 2.38㎜TPGP 73.. 7/32" 5.56㎜ 3/32" 2.38㎜TPGH 22.. 1/4" 6.35㎜ 1/8" 3.18㎜ ● Stock ○ 1-2 week delivery

ID T

oolin

g

102

ID Tooling

MogulBar Comp.A Comp.B Cutting conditionSCM435（Bore diameter：φ.394"（10㎜））v c=260SFM　ap=.010"（0.25㎜）f=.002IPR（0.05㎜ /rev）、.004IPR（0.1㎜ /rev）Steel shankS08H-STUPR09D10-OH（Shank diameter：φ.315"（8㎜））ZM3 TPGH090204FRF1External coolantDepth：.591"（15㎜）L/D=5

FeedIPR

.002

.004

Reduce chatter Chatter

Holder MogulBar　S08H-STUPR09D10-OH Competitor's boring bar

Insert F1-chipbreaker　ZM3 TPGH090204FRF1 Competitor's chipbreaker

Surface

.787”（20㎜）

φ.394”（10㎜）

.787”（20㎜）

φ.394”（10㎜）

Roughness

Excellent surface finish

Ra＝0.25μm、Rz＝1.50μm Ra＝0.83μm、Rz＝3.86μm

Chip

Good chip control Chip packing

Cutting conditionWork material：SCM435　　Bore diameter：φ.394"（10㎜）　　v c＝260SFM　　ap＝.010"（0.25㎜）　　f＝.002IPR（0.05㎜ /rev）Holder：S08H―STUPR09D10-OH（Min.bore Dia.：φ.394"（10㎜））　　Shank diameter：φ.315"（8㎜）Insert：TPGH090204　　External coolant　　Overhang length：L/D＝4　　Depth：.787"（20㎜）*For F1chipbreaker, R-hand inserts fit to R-hand toolholder.

Blind hole due to bar stock. Typical inserts flow chips forward.Then packed chips damage and break cutting edges.

FG, F1 and F05 chipbreakers flow chips backward and prevent cuttting edges from breaking.

Note: Use right-hand inserts with FG, F1 and F05 chipbreakers for right-hand boring bars.

■Boring on CNC Swiss-Type Lathes

Chip control and surface finish

Chatter resistant

ID T

oolin

g

103

■BGScrew on typeMachining diameterφ.394(10)～　ID Grooving

BG Series - Tool Holders

Gage Insert

Min. Bore Dia.φ Item number

Groove width covered φ Clamp screw Wrench

Right-hand

(Inch) (㎜) (Inch) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock

GTG10

.394 10 BGR08-00S .020-.039 .315 8 .276 7 .295 7.5 4.921 125 .787 20 .197 5 LR-S-2.5 × 6.8 CLR-15S 5711585 ○

.394 10 BGR08-10S .039-.079 .315 8 .276 7 .295 7.5 4.921 125 .787 20 .197 5 LR-S-2.5 × 6.8 CLR-15S 5711593 ○

.472 12 BGR10-00S .020-.039 .394 10 .354 9 .374 9.5 5.906 150 .984 25 .236 6 LR-S-2.5 × 6.8 CLR-15S 5711601 ○

.472 12 BGR10-10S .039-.079 .394 10 .354 9 .374 9.5 5.906 150 .984 25 .236 6 LR-S-2.5 × 6.8 CLR-15S 5711619 ○

GTG14

.551 14 BGR12-00S .039 .472 12 .433 11 .453 11.5 7.087 180 1.181 30 .276 7 LR-S-3 × 7.8 RLR-20S 5711627 ○

.551 14 BGR12-012S .057-.079 .472 12 .433 11 .453 11.5 7.087 180 1.181 30 .276 7 LR-S-3 × 7.8 RLR-20S 5711635 ○

.630 16 BGR14-00S .039 .551 14 .512 13 .531 13.5 7.087 180 1.378 35 .315 8 LR-S-3 × 7.8 RLR-20S 5711643 ○

.630 16 BGR14-012S .057-.079 .551 14 .512 13 .531 13.5 7.087 180 1.378 35 .315 8 LR-S-3 × 7.8 RLR-20S 5711650 ○

GTG20 .787 20 BGR16 .059-.079 .630 16 .591 15 .610 15.5 7.874 200 1.575 40 .394 10 LR-S-3 × 7.8 RLR-20S 5536362 ○.984 25 BGR20 .059-.079 .787 20 .748 19 .768 19.5 7.874 200 1.575 40 .472 12 LR-S-3 × 7.8 RLR-20S 5435433 ○

2°

2°



■GTG

BG Series - Inserts

d (IC) Item numberZM3 QM3 C7X

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code Stock Order Code Stock Order Code Stock

7/32" (5.56)

GTG10050FL00 0.020 0.50 .047 1.2 .002 0.05 5514088 ○GTG10065FL00 0.026 0.65 .047 1.2 .002 0.05 5514104 ○GTG10075FL00 0.030 0.75 .047 1.2 .002 0.05 5376835 ○GTG10100FL00 0.039 1.00 .047 1.2 .002 0.05 5376843 ○GTG10125L 0.049 1.25 .047 1.2 .008 0.20 5687611 ○GTG10145L 0.057 1.45 .047 1.2 .008 0.20GTG10150FL00 0.059 1.50 .047 1.2 .002 0.05 5376850 ○GTG10200FL01 0.079 2.00 .047 1.2 .004 0.10 5357884 ○

5/16" (7.94)

GTG14100FL00 0.039 1.00 .087 2.2 .002 0.05 5376868 ○GTG14145L 0.057 1.45 .087 2.2 .008 0.20 5687579 ○GTG14150FL00 0.059 1.50 .087 2.2 .002 0.05 5376876 ○GTG14175L 0.069 1.75 .087 2.2 .008 0.20 5687587 ○GTG14200FL01 0.079 2.00 .087 2.2 .004 0.10 5376884 ○

3/8" (9.525)

GTG20150FL 0.059 1.50 .126 3.2 .008 0.20 5396239 ○GTG20175L 0.069 1.75 .126 3.2 .008 0.20 5687595 ○GTG20200L 0.079 2.00 .126 3.2 .008 0.20 5687603 ○GTG20200FL 0.079 2.00 .126 3.2 .008 0.20 5376991 ○

d

w

L

1/8"(3.18)

＋.002"－0

d

w

L

1/8"(3.18)

＋.002"－0


ID T

oolin

g

105

Indexable End Mills

End

Mill

s

106

Indexable End Mills

Note① Inserts with center blade can be attached to non-single-blade indexable end mills. In this case, roughness of machined surface will be improved, but plunge cut operations cannot be performed.

② For ramping machining with the single blade endmills, please take the effective cutting edge length (4.0㎜ = .157") into consideration on setting machining programs.

Work MaterialSpeedSFM

Axial feedIPR

Traverse feedIPR

Depth of cutInch

Steel 260 ～ 400 ～ .001 ～ .002 ～ .118

Stainless Steel 130 ～ 200 ～ .0008 ～ .0015 ～ .079

【Recommended Cutting Conditions】

* Combination of single-blade type endmills and inserts with center blade is required.

REZ Series Indexable End Mills

◦Attach 20㎜ (.787") endmills in ER16 collet!◦Just change inserts to index. No need to make any adjustments.◦High quality surface finish as low as 1um (Rz) when wiper inserts are used.◦Corner radius as small as .002".◦In addition to D cut, ramping machining can be performed.*

Features

End

Mill

s

107

■ REZ Style End Mills

Item number Chipbreaker Center blade Wiper

ZM3 TM4(Inch) (㎜） Order code Stock Order code Stock

CZH04005CFR-BL .008 0.2 Y Y N 5819008 ○CZH0402CFR-BL .002 0.05 Y Y N 5818984 ○CZH0402CFR-140 .008 0.2 N Y Y 5310958 ●CZH04005CFR-140 .002 0.05 N Y Y 5310883 ○CZH0402CFR-070 .008 0.2 N N N 5120944 ○CZH04005CFR-070 .002 0.05 N N N 5230479 ○CZH0502CFR-141 .008 0.2 N Y Y 5310909 ○CZH05005CFR-141 .002 0.05 N Y Y 5310925 ○

Fig. GageInsert Item number φ φ Clamp Screw Wrench Order code Stock

(Inch) (㎜） (Inch) (㎜） (Inch) (㎜） (Inch) (㎜）

1 CZH04.. REZ080C1R212 .315 8 .394 10 2.362 60 .472 12 FSI02-2.2×4.0 T-07 5276498 ○CZH05.. REZ100C1R218 .394 10 .394 10 2.953 75 .472 12 FSI02-2.2×4.3 T-07 5285812 ○

2

CZH04.. REZ100B2R329 .394 10 .197 5 1.575 40 .394 10 FSI02-2.2×4.3 T-07 5520317 ○CZH04.. REZ100C2R133 .394 10 .236 6 1.969 50 .472 12 FSI02-2.2×4.3 T-07 5120936 ○CZH04.. REZ100C2R132 .394 10 .276 7 1.969 50 .472 12 FSI02-2.2×4.3 T-07 5120951 ○CZH04.. REZ100C2R141 .394 10 .394 10 1.969 50 .472 12 FSI02-2.2×4.3 T-07 5137971 ●CZH04.. REZ120C2R141 .472 12 .394 10 1.969 50 .472 12 FSI02-2.2×4.3 T-07 5355458 ○CZH04.. REZ140C2R141 .551 14 .394 10 1.969 50 .472 12 FSI02-2.2×4.3 T-07 5355466 ○

3CZH04.. REZ150B3R330 .591 15 .197 5 1.575 40 .394 10 FSI02-2.2X4.3 T-07 5520325 ○CZH04.. REZ200M3R319 .787 20 .276 7 1.969 50 .472 12 FSI02-2.2X4.3 T-07 5496088 ○CZH04.. REZ200M3R320 .787 20 .394 10 1.969 50 .472 12 FSI02-2.2X4.3 T-07 5496096 ○

4 CZH04.. REZ200C3R403* .787 20 .394 10 1.969 50 .472 12 FSI02-2.2X4.3 T-07 5659701 ●

Fig. 1 Fig. 2 Fig. 3 Fig. 4

Note: Length of blade (Lb) is .209 (5.3) without center blade, and .157 (4.0) with center blade.

* REZ200M3R320 with 5 deg relief to reduce tool pressure. See Fig. 4 for detail.


7°

.074(1.88)

.219(5.56)

.165(4.20)

(4.0)

(0.4)

87°

Wiper .016

With wiper & center blade

Center blade

With chipbreaker

.157 (Length of blade)

φφ

90°

ｂ

φφ

90°

5°

ｂ

φφ

90°

ｂ

φφ

90°

ｂ

End

Mill

s

109

NTK Unique Tooling

◦Y-axis◦CSV Series◦DS Holders

NTK

Uni

que

Tool

ing

110

Y-axis Tool Holders

◦Chip drops down to the bed of the machine due to gravity, and chip control problem is solved.

◦Front turning, grooving, and back turning operations can be perfomed by utilizing Y-axis control.

◦Eliminates chips from interfering with other tools.

Features

NTK's Y-axis control toolholders are so innovative that the holders utilize tool change controls on gang tooling posts (Y-axis) for turning operation.The Y-axis control toolholders enable performing front turning, grooving, and back turning by controling Y-axis.

Unique Conce

pt

Eliminate chip control problems

Y-axis control Toolholders

NTK

Uni

que

Tool

ing

111

Important Notes for Using Y-axis Tool Holders

Machinable OD Dimensions

Do not use more than two Y-axis tool holders at a time.To avoid interference, two Y-axis tool holders should not be installed next to each other.

For tool change, determine a retract point based on the overhang of the Y-axis tool holder.

*Machinable ODs with Y-GTTR type grooving tool holders are shown as an example. (The dimensions apply to other Y-axis tool holders as well.)

Y-axisHolder

OverhangTool Layout Situation

Overhang Amount (L).787"(20㎜)

.866"(22㎜)

.984"(25㎜)

.787"(20㎜)

.591（15）

.591（15）

.039Clearance Waiting point

.039D1

D2

D3

.787

（20）

L.787

（20）

D1Max machinable OD with Holder A.

No limitation No limitation No limitation

D2Max machinable OD with Holder B.

.512"（13㎜）

.512"(13㎜)

.512"(13㎜)

D3Max machinable OD with Holder C. No limitation No limitation No limitation

.984"(25㎜)

.591（15）

.591（15）

.079Clearance

.079Clearance

.038Clearance

.038Waiting Point

D1

D2

D3

.984

（25）

.984

（25）

LD1

Max machinable OD with Holder A.1.496"(38㎜)

2.283"(58㎜) No limitation


.587"(14.9㎜)

.535"(13.6㎜)

.512"(13㎜)

D3Max machinable OD with Holder C.

1.496"(38㎜)

2.283"(58㎜) No limitation

1.181"(30㎜)

.591（15）

.591（15）

.079Clearance

.079ClearanceWaiting Point

.039

Clearance.039

D1

D2D3

1.181

（30）

1.181

（30）

L

D1Max machinable OD with Holder A.

1.055"(26.8㎜)

1.142"(29㎜)

1.516"(38.5㎜)


.811"(20.6㎜)

.705"(17.9㎜)

.587"(14.9㎜)

D3Max machinable OD with Holder C.

1.299" (33㎜)1.055" (26.8㎜)for TBP style.

1.457" (37㎜)1.142" (29㎜)for TBP style.

2.028" (51.5㎜)1.516" (38.5㎜)for TBP style.

① ② ③ ④

① ② ③ ④

① ② ③ ④

① ② ③ ④

Retract the tool station based on the cutting edge location on the Y-axis tool holder.

Install a standard tool holder between the two Y-axis tool holders.

◦Example: Tool change from No.2 to No.4.

NTK

Uni

que

Tool

ing

112

Y-axis Tool Holders

55-deg. Diamond ("DC" Style)■Y-SDJCR

■Y-SDNCN

.787(20)

93°

A

A

A A

90°62°30′

0.0

.827(21)

4.724"(120)

Gang toolingpost

Feed direction

Feed direction

Gang toolingpost

(Inch, Metric)


DC..21.5..TFD07..



DC..32.5..TFD11..

Y-SDJCR083-IN 1/2" 1/2" 4.724 120 .984 25 LRIS-4×10 LLR-25S 5782784 ●

Y-SDJCR103-IN 5/8" 5/8" 4.724 120 .984 25 LRIS-4×10 LLR-25S 5573688 ●DC..21.5..TFD07.. Y-SDJCR12-07L .472 12 .472 12 4.724 120 1.181 30 LRIS-2.5×7 CLR-15S 5371679 ○

DC..32.5..TFD11.. Y-SDJCR12-11L .472 12 .630 16 4.724 120 1.181 30 LRIS-4×10 LLR-25S 5377759 ●

Note: Y-SDJCR holders do not work with left-hand inserts (such as DCGT-LS).


(Inch, Metric)


DC..32.5.. Y-SDNCN083-IN 1/2" 1/2" 1/4" 6.35 .984 25 LRIS-4×10 LLR-25S 5818885 ●

DC..32.5..Y-SDNCN12-11S .472 12 .472 12 .236 6.0 .787 20 LRIS-4×10 LLR-25S 5479191 ○

Y-SDNCN16-11L .630 16 .630 16 .315 8.0 1.181 30 LRIS-4×10 LLR-25S 5374921 ○

NTK

Uni

que

Tool

ing

113

35-deg. Diamond ("VC" Style)

Back Turning (TBP Style)

■Y-SVJCR

A A4.724"

(120)

0.0

.787(20)

■Y-TBPR, Y-CTPAR

3°

.138（3.5） 4.724(120)

2°

0.0

.787(20)

Feed direcition

Gang tooling post


Note: Use right-hand inserts for Y-TBPR and Y-CTPAR holders.

(Inch, Metric)GageInsert Item number Clamp screw Wrench Order Code Stock

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜)

TBP..FR..

Y-TBPR06-IN 3/8" 3/8" .984 25 LRIS-4×10PW CLR-15S 5573647 ●Y-TBPR08-IN 1/2" 1/2" .984 25 LRIS-4×12PW CLR-15S 5573654 ●Y-TBPR10-IN 5/8" 5/8" .984 25 LRIS-4×12PW CLR-15S 5574801 ●Y-TBPR12 .472 12 .472 12 .984 25 LRIS-4×12PW CLR-15S 5358478 ○

(Inch)GageInsert Item number Clamp screw Wrench Order Code Stock

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜)TBPA..FR.. Y-CTPAR08L-IN 1/2" 1/2" 1.181 30 LRIS-4×12PW CLR-15S 5792775 ●


(Inch)Gage Insert Item number Clamp screw Wrench Order Code Stock


VC..22.. Y-SVJCR062-IN 3/8" 3/8" 4.724 120 .787 20 LRIS-2.5X7 CLR-15S 5681853 ● Y-SVJCR082-IN 1/2" 1/2" 4.724 120 .787 20 LRIS-2.5X7 CLR-15S 5678628 ● Y-SVJCR102-IN 5/8" 5/8" 4.724 120 .984 25 LRIS-2.5X7 CLR-15S 5681861 ●

NTK

Uni

que

Tool

ing

114

Y-axis Tool Holders

■Y-GTTR

■Y-GTPA


(Inch, Metric)


TMG32..R.. GTM..32..R..

Y-GTTR06-IN 3/8" 3/8" .984 25 LR-S-4 × 10PW CLR-15S 5573621 ●



Y-GTTR10 .394 10 .394 10 .984 25 LR-S-4 × 10PW CLR-15S 5358452 ○

Y-GTTR12 .472 12 .472 12 .984 25 LR-S-4 × 10PW CLR-15S 5358445 ○

Feed direcition

Gang tooling post

A

B B

A

2°

2°

6°

0.0

0.0

.079

（2.0)

.787

（20)

4.724（120)

Max. grooving depth



Grooving ("GTM" and "TMG" Style)

Grooving (GTPA Style)

(Metric, ㎜)


GTPA Y-GTPAR1216 .472 12 .63 16 .787 20 LRIS-4×12PW CLR-15S 5563820 ○

A

A

.004（0.1） 4.724

（120）

1.063

（27）

NTK

Uni

que

Tool

ing

MEMOMEMO

116

Interchangeable Tooling


■CSVR/L

■CSVR/L-NC


AA .787（20）

.004

（0.1）

１°

AA １°

.787（20）

.004

（0.1）

AA

.787（20）

0.0

１°

φ


DS-CSVLGage Insert Item number φ Clamp screw Wrench Order Code Stock

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜)CSV..11.. DS-CSVL15 5/8" .591 15 4.724 120 .394 10 LRIS-2.5×7 CLR-15S 5572664 ●









CSV..11..


NTK

Uni

que

Tool

ing

117



Note: All angles shown are obtained when insert is set on the holder. All images in this page show right-hand inserts.● Stock ○ 1-2 week delivery

■CSVT - Threading

Item number Chipbreaker Pitch range VM1(Inch) (㎜) Order Code R L Order Code

CSVT11FR/LP60-035A No 125 TPI ～ 51 TPI .001MAX 0.03MAX 5344874 ● ● 5386909CSVT11FR/LP60-035B No 125 TPI ～ 51 TPI .001MAX 0.03MAX 5344882 ● ● 5386917

.014±.001

(1.0)

.039

60°

1/4"

（6.35）

.014±.001

(1.0)

.039

60°

type A

type B

■CSVF - Front Turning

Item number Chipbreaker

Max Depth of Cut Edge geometry（α×β°） VM1(Inch) (㎜) (Inch) (㎜) Order Code R L Order Code

CSVF11FR/LV-M No ― ― .006×2° 0.15×2° 5386248 ● ● 5386255CSVF11FR/LVB-M Yes .118 3.00 .006×2° 0.15×2° 5386263 ● ● 5386271

1/4"

6.35

β°

30°

α

0.0

1/4"

6.35

■CSVC - Cut-off


Max. Cut-off Dia. Width VM1(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code R L Order Code

CSVC11FR/LV06 No .118 3 .024 0.6 .079 2.0 0.0 5352547 ○CSVC11FR/LV07 No .157 4 .028 0.7 .098 2.5 0.0 5324272 ● ● 5330840CSVC11FR/LV08 No .157 4 .031 0.8 .098 2.5 0.0 5324256 ○ ○ 5330832CSVC11FR/LV10 No .197 5 .039 1.0 .118 3.0 0.0 5303490 ● ● 5303599CSVC11FR/LV13 No .197 5 .051 1.3 .118 3.0 0.0 5311824 ○ ○ 5311816CSVC11FR/LVB06 Yes .118 3 .024 0.6 .079 2.0 0.0 5358734 ○CSVC11FR/LVB07 Yes .157 4 .028 0.7 .098 2.5 0.0 5358742 ●CSVC11FR/LVB08 Yes .157 4 .031 0.8 .098 2.5 0.0 5358767 ○CSVC11FR/LVB10 Yes .197 5 .039 1.0 .118 3.0 0.0 5358783 ●CSVC11FR/LVB13 Yes .197 5 .051 1.3 .118 3.0 0.0 5358676 ○

25°

W±.002"

1/4"

(6.35)

1/4"

(6.35)

■CSVB - Back Turning

Item number Chip- breaker

Edge geometry（α×β°） VM1 TAS(Inch) (㎜) (Inch) (㎜) Order Code R L Order Code Order Code R

CSVB11FR/LV-M No .039 1.00 .006×2° 0.15×2° 5386289 ● ● 5386297 5503255 ●CSVB11FR/LVB-M Yes .039 1.00 .006×2° 0.15×2° 5386305 ● ● 5386313 5503248 ●

1/4"

(6.35)

α

β°45°

0.00.98(2.5)

W±.002"

1/4"

(6.35)

■CSVG - Grooving

Item number Width Max. Depth of Cut VM1(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) Order Code R L Order Code

CSVG11FR/LV025 .010 0.25 .006 0.15 .020 0.50 0.0 5354634 ●CSVG11FR/LV030 .012 0.30 .006 0.15 .020 0.50 0.0 5344940 ○CSVG11FR/LV035 .014 0.35 .006 0.15 .020 0.50 0.0 5354402 ●CSVG11FR/LV040 .016 0.40 .006 0.15 .020 0.50 0.0 5344932 ○CSVG11FR/LV045 .018 0.45 .018 0.45 .039 1.00 0.0 5354394 ●CSVG11FR/LV050 .020 0.50 .018 0.45 .039 1.00 0.0 5354642 ●CSVG11FR/LV055 .022 0.55 .018 0.45 .039 1.00 0.0 5344924 ○CSVG11FR/LV060 .024 0.60 .018 0.45 .039 1.00 0.0 5344916 ●CSVG11FR/LV065 .026 0.65 .018 0.45 .039 1.00 0.0 5354410 ○CSVG11FR/LV070 .028 0.70 .018 0.45 .039 1.00 0.0 5354428 ●CSVG11FR/LV075 .030 0.75 .050 1.40 .079 2.00 0.0 5332812 ● ○ 5332820CSVG11FR/LV080 .031 0.80 .050 1.40 .079 2.00 0.0 5358650 ○CSVG11FR/LV085 .033 0.85 .050 1.40 .079 2.00 0.0 5354436 ○CSVG11FR/LV090 .035 0.90 .050 1.40 .079 2.00 0.0 5354444 ○CSVG11FR/LV095 .037 0.95 .050 1.40 .079 2.00 0.0 5332846 ● ○ 5332838CSVG11FR/LV100 .039 1.00 .050 1.40 .079 2.00 0.0 5352562 ●CSVG11FR/LV110 .043 1.10 .102 2.60 .118 3.00 0.0 5358643 ○CSVG11FR/LV120 .047 1.20 .102 2.60 .118 3.00 0.0 5352570 ● ○ 5357561CSVG11FR/LV130 .051 1.30 .102 2.60 .118 3.00 0.0 5358627 ●CSVG11FR/LV140 .055 1.40 .102 2.60 .118 3.00 0.0 5358619 ○CSVG11FR/LV150 .059 1.50 .102 2.60 .118 3.00 0.0 5358601 ○

1/4"

(6.35)

w

L

＋.001"

－0

NTK

Uni

que

Tool

ing

118

DS Tool Holders

◦More turning tools without any hassle.

◦Available for Front turning, Back turning, Grooving, Threading, Micro-boring, and interchangeable tooling.

◦Available shank size range: from 14mm to 1".

Features

Are you satisfied with the number of tool positions in your machine? NTK DS type toolholder is useful when additional tool position are required. Five types of tool are available: Front turning, Back turning, Grooving, Threading, and Small boring which fit into the machines' vacant drill sleeves. DS Series tool holders can be used with both Swiss or non-Swiss type CNC lathes.

Industry Proven Con

cept

For making the most of vacant drill sleeves

DS Series Tool Holders

NTK

Uni

que

Tool

ing

119

■DS-SCLL0.0

A A

95°

5°

.787

φ

(20)

0.0

AA

95°5°

1/8NPT

φ

Note: Use right-hand or neutral inserts for DS-SDLL bars.


＊Comes with coolant through.

DS-SCLL19-09-004DS-SCLL22-09-005(Coolant through)

80-deg. Diamond ("CC" Style)

■DS-SDUL ■DS-SDXL22-11-006 (Coolant through)

A A

0.0

3°

122°φ

1/8NPT

0.0

A A

119°

6°

φ20

(Inch, Metric)

Gage Insert Item number φ Clamp screw Wrench Order Code Stock(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜)

DC..21.5..TFD07..

DS-SDUL14F-07 .551 14 .522 13 3.150 80 .236 6.0 LRIS-2.5 × 7 CLR-15S 5348545 ○DS-SDUL15H-07 5/8" .591 15 3.937 100 .236 6.0 LRIS-2.5 × 7 CLR-15S 5348107 ○DS-SDUL16F-07 .630 16 .591 15 3.150 80 .236 6.0 LRIS-2.5 × 7 CLR-15S 5520598 ○DS-SDUL19-07 3/4" .709 18 4.724 120 .236 6.0 LRIS-2.5 × 7 CLR-15S 5278247 ●DS-SDUL20-07* .787 20 .748 19 4.724* 120 .236 6.0 LRIS-2.5 × 7 CLR-15S 5278239 ●DS-SDUL22-07 .866 22 .827 21 4.724 120 .236 6.0 LRIS-2.5 × 7 CLR-15S 5330758 ●

DC..32.5..TFD11..***

DS-SDUL19-11 3/4" .709 18 4.724 120 .394 10.0 LRIS-4 × 10 LLR-25S 5278262 ●DS-SDUL20-11** .787 20 .748 19 4.724** 120 .394 10.0 LRIS-4 × 10 LLR-25S 5278254 ●DS-SDUL22-11 .866 22 .827 21 4.724 120 .394 10.0 LRIS-4 × 10 LLR-25S 5324025 ●DS-SDXL22-11-006*** .866 22 .827 21 4.724 120 .472 12.0 LRIS-4 × 10 LLR-25S 5629696 ●DS-SDUL25-11 1" .945 24 5.906 150 .394 10.0 LRIS-4 × 10 LLR-25S 5317136 ●

* Also available in 95㎜ long (DS-SDUL20X-07 (order code: 5520606), 1-2 week delivery).** Also available in 95㎜ long (DS-SDUL20X-11 (order code: 5520614), 1-2 week delivery).

*** TFD11 inserts cannnot be used with DS-SDXL tool holders.

Note: Use right hand or neutral inserts for the DS-SDUL and DS-SDXL bars.

55-deg. Diamond ("DC" Style)

(Inch, Metric)GageInsert Item number φ Clamp screw Wrench Order Code Stock


CC..21.5..

DS-SCLL15H-06 5/8" .591 15 3.937 100 .236 6.0 LRIS-2.5X7 CLR-15S 5486923 ○DS-SCLL19-06 3/4" .709 18 4.724 120 .236 6.0 LRIS-2.5X7 CLR-15S 5338876 ●DS-SCLL20X-06 .787 20 .748 19 3.740 95 .236 6.0 LRIS-2.5X7 CLR-15S 5520630 ○DS-SCLL20-06 .787 20 .748 19 4.724 120 .236 6.0 LRIS-2.5X7 CLR-15S 5388608 ●DS-SCLL22-06 .866 22 .827 21 4.724 120 .236 6.0 LRIS-2.5X7 CLR-15S 5484936 ●DS-SCLL25-06 1" .945 24 5.906 150 .236 6.0 LRIS-2.5X7 CLR-15S 5486691 ●

CC..32.5..

DS-SCLL15H-09 5/8" .591 15 3.937 100 .236 6.0 LRIS-4X8 LLR-25S 5486931 ○DS-SCLL19-09 3/4" .709 18 4.724 120 .236 6.0 LRIS-4X8 LLR-25S 5338884 ●DS-SCLL19-09-004* 3/4" .709 18 4.724 120 .413 10.5 LRIS-4X8 LLR-25S 5629670 ●DS-SCLL20X-09 .787 20 .748 19 3.740 95 .236 6.0 LRIS-4X8 LLR-25S 5520655 ○DS-SCLL20-09 .787 20 .748 19 4.724 120 .236 6.0 LRIS-4X8 LLR-25S 5374699 ●DS-SCLL22-09 .866 22 .827 21 4.724 120 .236 6.0 LRIS-4X8 LLR-25S 5401096 ●DS-SCLL22-09-005* .866 22 .827 21 4.724 120 .472 12.0 LRIS-4X8 LLR-25S 5629688 ●DS-SCLL25-09 1" .945 24 5.906 150 .236 6.0 LRIS-4X8 LLR-25S 5486709 ●

NTK

Uni

que

Tool

ing

120

DS Tool Holders

(Inch, Metric)GageInsert Item Number φ Clamp Screw Wrench Order Code Stock(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜)

VC..22..

DS-SVXL15H-11 5/8 .591 15 3.937 100 .394 10 LRIS-2.5×7 CLR-15S 5418413 ○DS-SVXL19-11 3/4 .709 18 4.724 120 .394 10 LRIS-2.5×7 CLR-15S 5393756 ●DS-SVXL20-11 .787 20 .748 19 4.724 120 .394 10 LRIS-2.5×7 CLR-15S 5393764 ●DS-SVXL22-11 .866 22 .827 21 4.724 120 .394 10 LRIS-2.5×7 CLR-15S 5486675 ●DS-SVXL25-11 1 .945 24 5.906 150 .394 10 LRIS-2.5×7 CLR-15S 5486683 ●

A A

99°

0.0

55°

φ

Note: Use right-hand or neutral inserts for DS-SVXL bars.

■DS-SVXL

35-deg. Diamond ("VC" Style)

35-deg. Diamond with 11 deg. relief ("VP" Style)■DS-SVVPN

(Inch, Metric)GageInsert Item Number φ Clamp Screw Wrench Order Code Stock(Inch) (㎜) (Inch) (㎜) (Inch) (㎜)

VP..22..DS-SVVPN19-11 3/4 .709 18 4.724 120 LRIS-2.5×7 CLR-15S 5511555 ○DS-SVVPN22-11 .866 22 .827 21 4.724 120 LRIS-2.5×7 CLR-15S 5511563 ○

35°

0.0

A A72°30’

1.063（27） φ



NTK

Uni

que

Tool

ing

121

Back Turning ("TBP" Style)

Grooving ("GTM" and "TMG" Style)


■DS-TBP

(Inch, Metric)GageInsert Item number

φClamp screw Wrench Order Code Stock


TBP..FR..DS-TBPL19 3/4" .709 18 4.724 120 .433 11 LRIS-4×10 LLR-25S 5540414 ●DS-TBPL20 .787 20 .748 19 4.724 120 .433 11 LRIS-4×10 LLR-25S 5540422 ○DS-TBPL25 1" .945 24 5.906 150 .512 13 LRIS-4×10 LLR-25S 5540430 ●

3°

0.0

.138(3.5)

.217(5.5)

.591(15) φ


■DS-GTTLMax depth of cut .079" (2.0㎜)

Note: DS-GTTL holders take right-hand inserts.

(Inch, Metric)

Gage Insert Item numberφ

Clamp screw Wrench Order Code Stock(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜)

TMG32..R.. GTM..32..R..

DS-GTTL16X .630 16 .591 15 3.740 95 .236 6 LR-S-4×5.8 RLR-20S 5341532 ○

DS-GTTL19 3/4" .709 18 4.724 120 .236 6 LR-S-4×5.8 RLR-20S 5278288 ●

DS-GTTL20 .787 20 .748 19 4.724 120 .236 6 LR-S-4×5.8 RLR-20S 5278304 ○

DS-GTTL22 .866 22 .827 21 4.724 120 .236 6 LR-S-4×5.8 RLR-20S 5324041 ●

DS-GTTL25 1" .945 24 4.724 120 .394 10 LR-S-4×5.8 RLR-20S 5317144 ●

A A

2°

2°

φ

0.0

.079

（2.0) .787

（20)Max. grooving depth

Note: DS-TBPL holders take right-hand inserts.

NTK

Uni

que

Tool

ing

122

DS Tool Holders

■DS-TTPL

.217(5.5)

0.0

.787(20)

φ



(Metric, ㎜)GageInsert Item number

φ Clampscrew Wrench OrderCode Stock


TTP55FR..TTP60FR..

DS-TTPL19 3/4" .709 18 4.724 120 .394 10 LRIS-4×10 LLR-25S 5278270 ●DS-TTPL20 .787 20 .748 19 4.724 120 .394 10 LRIS-4×10 LLR-25S 5278296 ●DS-TTPL22 .866 22 .827 21 4.724 120 .394 10 LRIS-4×10 LLR-25S 5324033 ●DS-TTPL25 1" .945 24 5.906 150 .394 10 LRIS-4×10 LLR-25S 5317151 ●

Threading ("TTP" Style)

Micro-Boring ("LBM" Style)

Interchangeable Tools ("CSV" Style)

■DS-LBMB

Note: DS-LBMBL holders take right hand inserts..394(10)

0.0

φｄ

A

(Inch, Metric)GageInsert Item Number φ

Clamp Screw Wrench Order Code Stock(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜)LBMD-S

LBM(C)3080LBME2060LBMD2060LBMD1020

DS-LBMBL16X .630" 16 .591" 15 3.740" 95 .236 6 LRIS-4 × 10PW RLR-15S 5359906 ○DS-LBMBL19 3/4" .709" 18 4.724" 120 .236 6 LRIS-4 × 10PW RLR-15S 5359898 ●DS-LBMBL20 .787" 20 .748" 19 4.724" 120 .236 6 LRIS-4 × 10PW RLR-15S 5359880 ●DS-LBMBL22 .866" 22 .827" 21 4.724" 120 .236 6 LRIS-4 × 10PW RLR-15S 5359872 ●DS-LBMBL25 1" .945" 24 5.906" 150 .236 6 LRIS-4 × 10PW RLR-15S 5393905 ●

Note : Also available in 14㎜ , 25㎜ , 5/8" shanks(φ ).


AA

.787（20）

0.0

１°

φ

DS-CSVLGage Insert Item number φ Clamp screw Wrench Order Code Stock

(Inch) (㎜) (Inch) (㎜) (Inch) (㎜) (Inch) (㎜)CSV..11.. DS-CSVL15 5/8" .591 15 4.724 120 .394 10 LRIS-2.5×7 RLR-15S 5572664 ●


Note: DS-TTPL holders take right hand inserts.

NTK

Uni

que

Tool

ing

123

Technical Information

Tech

nica

l Inf

o

124

Technical InfoSpare Parts - WrenchesStandard Items

Item Number Appearance

CLR-13S(FormerlyRLR-13S)

CLR-15S(FormerlyRLR-15S)

RLR-20S

LLR-25S

LLR-25S-20＊65

LLR-28S

Optional Items〈LLR Type〉

Item Number Appearance

LLR-13S

LLR-15S

LLR-20S

〈Driver type wrench kits〉Item Number Contents

XX2815-04-13S XX2815-04 with HLR-25S（HLR-13S）




〈Driver type wrench for increased usability〉Item Number Replaceable Bits

HLR-13S

HLR-15S

HLR-20S

HLR-25S

Item Number Magnetic Driver Handle

XX2815-04

Tech

nica

l Inf

o

125

Clamp Screws and Wrenches

◦Make sure that wrench tip and wrench hole are neither deformed nor stripped.

◦Apply wrench straight to screw hole.

◦Do not apply more torque than the recommended amount (as shown to the right).

Note: Wrenches and bits come in a pack of five. Clamp screws come in a pack of ten.

Recommended Tightening TorqueAttention: When tightening screws

Item Number Recommended Tightening Torque（N・m）CLRLLR 13SHLR

0.7

〃 15S 1.4RLRLLR 20SHLR

3.0

LLR 25SHLR 5.0

〃 28S 7.0

Clamp Screw Dimension（㎜） Standard WrenchAppearance Order Code Item Number a b c θ（°） Order Code Item Number

θ

a

b

c5704739 LR-S-2*3.5 M2×P0.4 3.1 3.5 82

5681994 CLR-13S5907704 LR-S-2*3.7 M2×P0.4 3.1 3.7 825907712 LR-S-2*4.4 M2×P0.4 3.1 4.4 825907720 LR-S-2*5.5 M2×P0.4 3.0 5.5 905907738 LR-S-2.5*4.8 M2.5×P0.45 3.6 4.8 82

5681978 CLR-15S5704747 LR-S-2.5*5.5 M2.5×P0.45 3.6 5.5 825907746 LR-S-2.5*6 M2.5×P0.45 3.5 6.0 90

θ

a

b

Accessible from front and back

c

5907753 LR-S-2.5*6.8 M2.5×P0.45 3.5 6.8 905773619 LR-S-3*5.8 M3×P0.5 4.1 5.8 90

5485164 RLR-20S5907761 LR-S-3*6.2 M3×P0.5 5.2 6.2 825907779 LR-S-3*7.8 M3×P0.5 4.0 7.8 905907787 LR-S-4*5.8 M4×P0.7 5.8 6.0 825907795 LR-S-4*9 M4×P0.7 5.8 9.0 825116991 LR-S-4*10PW M4×P0.7 5.8 10.0 90 5681978 CLR-15S

θ

a

b

c

5534029 LRIS-2*6 M2×P0.4 2.6 6.0 605681994 CLR-13S

5907803 LRIS-2.2*6 M2.2×P0.45 3.15 6.0 605989181 LRIS-2.5*5 M2.5×P0.45 3.6 5.0 60

5681978 CLR-15S5907811 LRIS-2.5*7 M2.5×P0.45 3.6 7.0 605907829 LRIS-3*6 M3×P0.5 4.0 6.0 60

5485164 RLR-20S5428156 LRIS-3*8 M3×P0.5 4.2 8.0 605477328 LRIS-4*5 M4×P0.7 5.85 5.0 60

53649305794698

LLR-25SLLR-25S-20＊65θ

a

b

c

Accessible from front and back

5907837 LRIS-4*6 M4×P0.7 5.85 6.0 605977566 LRIS-4*8 M4×P0.7 5.85 8.0 605907845 LRIS-4*10 M4×P0.7 5.85 10.0 605684105 LRIS-4*12 M4×P0.7 5.85 12.0 605907852 LRIS-5*10 M5×P0.8 7.0 9.5 60 5364948 LLR-28S5116983 LRIS-4*10PW M4×P0.7 5.7 10.0 60

5681978 CLR-15S5090576 LRIS-4*12PW M4×P0.7 5.7 12.0 60

Tech

nica

l Inf

o

126

Technical InfoANSI / ISO Insert Nomenclature

1 Shape

C 80°

D 55°

E 75°

L

P

R

S

T

V 35°

W 80°

2 Clearances 4 Type

0°

5°

7°

11°

15°

20°

N

B

C

P

D

E

CInch C G T1 2 3 4

CMetric C G T

S TC

D K

φd

m m

φd s

3 Tolerance Class

Symbol d (inch) m (inch) s (inch)

M tolerance

M tolerance

Inscribed Circle

Inscribed Circle

d (inch)

d (inch)

1/4"3/8"1/2"5/8"3/4"1"

±.002±.002±.003±.004±.004±.005

m (inch)

m (inch)

±.003±.003±.005±.006±.006±.007

A

F

C

H

E

G

J

K

L

M

N

U

±.0010

±.0050

±.0010

±.0050

±.0010

±.0010

±.0020

±.002 ～ ±.005

±.002 ～ ±.005

±.002 ～ ±.005

±.002 ～ ±.005

±.003 ～ ±.010

±.0002

±.0002

±.0005

±.0005

±.0010

±.0010

±.0020

±.0005

±.0010

±.003 ～ ±.007

±.003 ～ ±.007

±.005 ～ ±.015

±.0010

±.0010

±.0010

±.0010

±.0010

±.0050

±.0050

±.0010

±.0010

±.0050

±.0010

±.0050

1/4"3/8"1/2"5/8"3/4"

±.002±.002±.003±.004±.004

±.004±.004±.006±.006±.007

6 Thickness

ThicknessS(inch)

3/32"

1/8"

5/32"

3/16"

1/4"

5/16"

3/8"

1/2"

Inch Metric

02

03

T3

04

06

07

09

12

1.5

2

2.5

3

4

5

6

8Special design

70°-90°

70°-90°

40°-60°

40°-60°

Type Symbol Type Symbol

N (E)

F

R

A

G

M

X

H

B

T

W

Tech

nica

l Inf

o

127

8 Edge Sharpness

3 2.5 08M F N AM35 6 7 8 9 10

09 T3 02M F N AM3

9 Hand of Chipbreaker 10 Type of Chipbreaker

C D R S T V WInscribed

Circle(inch)

1/4"

3/8"

1/2"

5/8"

3/4"

1"

Inch

Metric

06

09

12

16

19

25

07

11

15

19

23

31

06

09

12

15

19

25

11

16

22

27

33

44

11

16

22

27

33

44

04

06

08

10

13

17

2

3

4

5

6

8

5 Cutting Edge Length

R

7 Nose RadiusCorner Radius Inch Metric

.001"

.003"

.004"

.007"

.008"

.015"

.016" (1/64")

.031" (1/32")

01

04M

04

08M

08

1M

1

2

00

01M

01

02M

02

04M

04

08

N Neutral*

R Right-hand

L Left-hand

* Omitted when edge is not "up-sharp".

See page 16 and 17 for chipbreaker information.

F Up-sharp edge (without any edge preparation)

(Blank) Non up-sharp edge

Tech

nica

l Inf

o

129

Order Codesfor "CC", "DC", "VC", "TFD", "TFV", "CTP", "CTPA" and "CTPW" inserts

Ord

er C

odes

130

Order CodesItem Number Grade Order Code

CCGT21.501FN(AM3) QM3 QM3 5824289CCGT21.501FN(AM3) TAS TAS 5487996CCGT21.501FN(AM3) VM1 VM1 5264767CCGT21.501LS VM1 VM1 5264601CCGT21.501RS QM3 QM3 5980115CCGT21.501RS VM1 VM1 5264460CCGT21.504LS VM1 VM1 5264619CCGT21.504MFN(AM3) QM3 QM3 5539945CCGT21.504MRS QM3 QM3 5539960CCGT21.504RS VM1 VM1 5264478CCGT21.508FRF1 TM4 TM4 5789847CCGT21.508LS VM1 VM1 5264627CCGT21.508MFN(AM3) QM3 QM3 5539952CCGT21.508MFN(AM3) TAS TAS 5488002CCGT21.508MRS QM3 QM3 5497417CCGT21.508RS VM1 VM1 5264486CCGT21.51FRF1 TM4 TM4 5789854CCGT21.51MFN(AM3) QM3 QM3 5809629CCGT21.51MFN(AM3) TAS TAS 5488010CCGT21.51RS QM3 QM3 5824297CCGT32.501FN(AM3) QM3 QM3 5819057CCGT32.501FN(AM3) TAS TAS 5508296CCGT32.501FN(AM3) TM4 TM4 5694666CCGT32.501FN(AM3) VM1 VM1 5264783CCGT32.501FN(AZ7) QM3 QM3 5563564CCGT32.501FN(AZ7) TAS TAS 5563614CCGT32.501LS VM1 VM1 5264635CCGT32.501RS QM3 QM3 5667951CCGT32.501RS TAS TAS 5487962CCGT32.501RS TM4 TM4 5693148CCGT32.501RS VM1 VM1 5264494CCGT32.504LS VM1 VM1 5264643CCGT32.504MFN(AM3) QM3 QM3 5508254CCGT32.504MFN(AM3) TAS TAS 5508288CCGT32.504MFN(AM3) TM4 TM4 5694575CCGT32.504MFN(AM3) VM1 VM1 5643564CCGT32.504MFN(AZ7) QM3 QM3 5563531CCGT32.504MFN(AZ7) TAS TAS 5563572CCGT32.504MRS TAS TAS 5487988CCGT32.504MRS TM4 TM4 5693122CCGT32.504RS QM3 QM3 5042452CCGT32.504RS VM1 VM1 5264502CCGT32.504RU1 TAS TAS 5511696CCGT32.508LS VM1 VM1 5264650CCGT32.508MFN(AM3) QM3 QM3 5476379CCGT32.508MFN(AM3) TAS TAS 5508270CCGT32.508MFN(AM3) TM4 TM4 5694583CCGT32.508MFN(AM3) VM1 VM1 5643572CCGT32.508MFN(AZ7) QM3 QM3 5563549CCGT32.508MFN(AZ7) TAS TAS 5563580CCGT32.508MRS TAS TAS 5487970CCGT32.508MRS TM4 TM4 5693106CCGT32.508RS QM3 QM3 5082151CCGT32.508RS VM1 VM1 5264510

Item Number Grade Order CodeCCGT32.508RU1 TAS TAS 5511704CCGT32.51FN(AM3) VM1 VM1 5295464CCGT32.51MFN(AM3) QM3 QM3 5476411CCGT32.51MFN(AM3) TM4 TM4 5694591CCGT32.51MFN(AZ7) QM3 QM3 5563556CCGT32.51MFN(AZ7) TAS TAS 5563606CCGT32.51MRS TM4 TM4 5693080CCGT32.51RS QM3 QM3 5385182CCGT32.52FN(AM3) QM3 QM3 5659354CCGW21.504FN ZM3 ZM3 5132030CCGW32.504FN ZM3 ZM3 5132014CCMW32.504 PD1 PD1 5471453CCMW32.508 PD1 PD1 5471446CCMW32.51 PD1 PD1 5471438CCMW32.52 PD1 PD1 5471420CTP05FLK-SH ZM3 ZM3 5788781CTP05FLN-SH ZM3 ZM3 5788773CTP05FRN-SH ZM3 ZM3 5788799CTP05FR-SH ZM3 ZM3 5788732CTP07FL ZM3 ZM3 5126263CTP07FR ZM3 ZM3 5126255CTP10FL ZM3 ZM3 5089586CTP10FLK ZM3 ZM3 5131420CTP10FLK-211 VM1 VM1 5681911CTP10FLN ZM3 ZM3 5133350CTP10FLV VM1 VM1 5264882CTP10FLV ZM3 ZM3 5255641CTP10FR VM1 VM1 5680632CTP10FR ZM3 ZM3 5089594CTP10FRK VM1 VM1 5513882CTP10FRK ZM3 ZM3 5131412CTP10FRN ZM3 ZM3 5133327CTP10FRV KM1 KM1 5576079CTP10FRV VM1 VM1 5264841CTP10FRV ZM3 ZM3 5255708CTP15FL ZM3 ZM3 5089610CTP15FLK VM1 VM1 5328240CTP15FLK ZM3 ZM3 5131396CTP15FLKV VM1 VM1 5264874CTP15FLN VM1 VM1 5378526CTP15FLN ZM3 ZM3 5133319CTP15FLNV KM1 KM1 5576012CTP15FLV VM1 VM1 5264890CTP15FLV ZM3 ZM3 5255625CTP15FR VM1 VM1 5284690CTP15FR ZM3 ZM3 5089602CTP15FRK ZM3 ZM3 5131404CTP15FRN VM1 VM1 5306543CTP15FRN ZM3 ZM3 5133301CTP15FRNV KM1 KM1 5576111CTP15FRV KM1 KM1 5576087CTP15FRV VM1 VM1 5264858CTP15FRV ZM3 ZM3 5255682CTP20FL ZM3 ZM3 5125513

Ord

er C

odes

131

Item Number Grade Order CodeCTP20FLK VM1 VM1 5280722CTP20FLK ZM3 ZM3 5131370CTP20FLN VM1 VM1 5273008CTP20FLN ZM3 ZM3 5133343CTP20FLNV KM1 KM1 5576004CTP20FLV VM1 VM1 5264908CTP20FLV ZM3 ZM3 5255609CTP20FR VM1 VM1 5432372CTP20FR ZM3 ZM3 5125521CTP20FRK ZM3 ZM3 5131388CTP20FRN VM1 VM1 5272224CTP20FRN ZM3 ZM3 5133335CTP20FRNV KM1 KM1 5576020CTP20FRV KM1 KM1 5576095CTP20FRV VM1 VM1 5264866CTP20FRV ZM3 ZM3 5255666CTPA07FL ZM3 ZM3 5501234CTPA07FLK ZM3 ZM3 5505912CTPA07FR ZM3 ZM3 5501242CTPA07FRN ZM3 ZM3 5512496CTPA10FL VM1 VM1 5501267CTPA10FL ZM3 ZM3 5501226CTPA10FLK QM3 QM3 5650643CTPA10FLK VM1 VM1 5496930CTPA10FLK ZM3 ZM3 5496906CTPA10FLKFT QM3 QM3 5792189CTPA10FLN QM3 QM3 5650718CTPA10FLN VM1 VM1 5496922CTPA10FLN ZM3 ZM3 5496898CTPA10FLS QM3 QM3 5652680CTPA10FR QM3 QM3 5650684CTPA10FR VM1 VM1 5501259CTPA10FR ZM3 ZM3 5501218CTPA10FRFT QM3 QM3 5805817CTPA10FRN QM3 QM3 5650676CTPA10FRN VM1 VM1 5496914CTPA10FRN ZM3 ZM3 5496880CTPA10FRS QM3 QM3 5652672CTPA15FL VM1 VM1 5449178CTPA15FL ZM3 ZM3 5342688CTPA15FLK QM3 QM3 5562699CTPA15FLK VM1 VM1 5476320CTPA15FLK ZM3 ZM3 5248083CTPA15FLKFT QM3 QM3 5792197CTPA15FLN QM3 QM3 5562707CTPA15FLN VM1 VM1 5365747CTPA15FLN ZM3 ZM3 5286349CTPA15FLS QM3 QM3 5652664CTPA15FR QM3 QM3 5270020CTPA15FR VM1 VM1 5439328CTPA15FR ZM3 ZM3 5248075CTPA15FRFT QM3 QM3 5805826CTPA15FRN QM3 QM3 5556881CTPA15FRN VM1 VM1 5415096

Item Number Grade Order CodeCTPA15FRN ZM3 ZM3 5271473CTPA15FRS QM3 QM3 5652656CTPA20FL VM1 VM1 5462320CTPA20FL ZM3 ZM3 5199138CTPA20FLK QM3 QM3 5250774CTPA20FLK VM1 VM1 5439369CTPA20FLK ZM3 ZM3 5199112CTPA20FLN QM3 QM3 5250964CTPA20FLN VM1 VM1 5439351CTPA20FLN ZM3 ZM3 5199120CTPA20FLN-P PD1 PD1 5781646CTPA20FLS QM3 QM3 5654702CTPA20FLS ZM3 ZM3 5225255CTPA20FR QM3 QM3 5229596CTPA20FR VM1 VM1 5439310CTPA20FR ZM3 ZM3 5194113CTPA20FRN QM3 QM3 5562715CTPA20FRN VM1 VM1 5476338CTPA20FRN ZM3 ZM3 5199146CTPA20FRN-P PD1 PD1 5781620CTPA20FRS QM3 QM3 5654710CTPA20FRS ZM3 ZM3 5378823CTPA20FRV VM1 VM1 5264916CTPAX15FLN TAS TAS 5517438CTPAX15FR TAS TAS 5506712CTPAX20FLN TAS TAS 5517461CTPW25FL ZM3 ZM3 5487053CTPW25FLK ZM3 ZM3 5487012CTPW25FLN ZM3 ZM3 5487046CTPW25FLNV ZM3 ZM3 5487020CTPW25FLP ZM3 ZM3 5487038CTPW25FR ZM3 ZM3 5437991CTPW25FRN ZM3 ZM3 5438056CTPW25FRNV ZM3 ZM3 5438049CTPW25FRP ZM3 ZM3 5443650CTPX15FLK QM3 QM3 5535646CTPX15FLN QM3 QM3 5535653CTPX15FR QM3 QM3 5535729CTPX15FRN QM3 QM3 5535711CTPX15FRN TAS TAS 5515325CTPX20FLK QM3 QM3 5535620CTPX20FLN QM3 QM3 5535638CTPX20FR QM3 QM3 5535745CTPX20FR ZM3 ZM3 5334834CTPX20FRN QM3 QM3 5535737DCGT070201FNAM3 VM1 VM1 5273214DCGT070202FNAM3 VM1 VM1 5264817DCGT21.501FN(AM3) QM3 QM3 5396221DCGT21.501FN(AM3) TAS TAS 5488069DCGT21.501FN(AM3) VM1 VM1 5264809DCGT21.501FN(AM3) ZM3 ZM3 5166129DCGT21.501LS VM1 VM1 5264668DCGT21.501LS ZM3 ZM3 5132089DCGT21.501RS QM3 QM3 5089248

Ord

er C

odes

132

Order CodesItem Number Grade Order Code

DCGT32.504RS ZM3 ZM3 5978093DCGT32.504RU1 TAS TAS 5511779DCGT32.508FN(AM3) VM1 VM1 5264833DCGT32.508FN(AM3) ZM3 ZM3 5189857DCGT32.508LS VM1 VM1 5264718DCGT32.508MFN(AM3) QM3 QM3 5476429DCGT32.508MFN(AM3) TAS TAS 5488028DCGT32.508MFN(AM3) TM4 TM4 5694641DCGT32.508MFN(AZ7) QM3 QM3 5563465DCGT32.508MFN(AZ7) TAS TAS 5563473DCGT32.508MFN(AZ7) TM4 TM4 5694088DCGT32.508MRS TAS TAS 5488101DCGT32.508MRS TM4 TM4 5693163DCGT32.508RS QM3 QM3 5082003DCGT32.508RS VM1 VM1 5264577DCGT32.508RS ZM3 ZM3 5013560DCGT32.508RU1 TAS TAS 5511787DCGT32.508RU1 VM1 VM1 5276043DCGT32.51FN(AM3) ZM3 ZM3 5053475DCGT32.51MFN(AM3) QM3 QM3 5476437DCGT32.51MFN(AM3) TAS TAS 5488036DCGT32.51MFN(AM3) TM4 TM4 5693783DCGT32.51MFN(AZ7) QM3 QM3 5563440DCGT32.51MFN(AZ7) TAS TAS 5563432DCGT32.51MFN(AZ7) TM4 TM4 5694104DCGT32.51MRS TM4 TM4 5693064DCGT32.51RS QM3 QM3 5385190DCGT32.51RU1 VM1 VM1 5292149DCGT32.52FN(AM3) QM3 QM3 5566559DCGT32.52FN(AZ7) QM3 QM3 5563416DCGT32.52FN(AZ7) TAS TAS 5563424DCMW32.504 PD1 PD1 5471339DCMW32.508 PD1 PD1 5471347DCMW32.51 PD1 PD1 5471354DCMW32.52 PD1 PD1 5471362TFD07FR05 QM3 QM3 5335278TFD07FR05 ZM3 ZM3 5106893TFD07FR15 QM3 QM3 5601257TFD07FR15 ZM3 ZM3 5106901TFD11FR05 QM3 QM3 5590716TFD11FR05 ZM3 ZM3 5141908TFD11FR15 QM3 QM3 5560198TFD11FR15 ZM3 ZM3 5141932TFV11FR05SX VM1 VM1 5358528TFV11FR05SX ZM3 ZM3 5358536TFV11FR05U VM1 VM1 5332333TFV11FR05U ZM3 ZM3 5332325TFV11FR10SX VM1 VM1 5357066TFV11FR10SX ZM3 ZM3 5358510TFV11FR10U VM1 VM1 5332317TFV11FR10U ZM3 ZM3 5332309VCET2204MRU VM1 VM1 5515911VCGT2201FN(AM3) QM3 QM3 5819040VCGT2201FN(AM3) VM1 VM1 5410386

Item Number Grade Order CodeDCGT21.501RS VM1 VM1 5264528DCGT21.501RS ZM3 ZM3 5934583DCGT21.501RU TAS TAS 5511738DCGT21.504FN(AM3) VM1 VM1 5273214DCGT21.504FN(AM3) ZM3 ZM3 5166145DCGT21.504LS VM1 VM1 5264676DCGT21.504LS ZM3 ZM3 5131230DCGT21.504MFN(AM3) QM3 QM3 5539903DCGT21.504MFN(AM3) TAS TAS 5508304DCGT21.504MRS QM3 QM3 5539929DCGT21.504MRS TAS TAS 5488077DCGT21.504RS VM1 VM1 5264536DCGT21.504RS ZM3 ZM3 5934575DCGT21.504RU TAS TAS 5511746DCGT21.508FN(AM3) ZM3 ZM3 5172119DCGT21.508LS VM1 VM1 5264684DCGT21.508LS ZM3 ZM3 5982020DCGT21.508MFN(AM3) QM3 QM3 5539911DCGT21.508MFN(AM3) TAS TAS 5488044DCGT21.508MRS QM3 QM3 5539937DCGT21.508MRS TAS TAS 5488085DCGT21.508RS VM1 VM1 5264544DCGT21.508RS ZM3 ZM3 5880380DCGT21.508RU TAS TAS 5511761DCGT21.51FN(AM3) ZM3 ZM3 5048087DCGT21.51MFN(AM3) QM3 QM3 5824313DCGT21.51MFN(AM3) TAS TAS 5488051DCGT21.51RS QM3 QM3 5824321DCGT21.51RS VM1 VM1 5316971DCGT32.501FN(AM3) QM3 QM3 5589478DCGT32.501FN(AM3) TM4 TM4 5694625DCGT32.501FN(AM3) VM1 VM1 5264825DCGT32.501FN(AM3) ZM3 ZM3 5345244DCGT32.501FN(AZ7) QM3 QM3 5563507DCGT32.501FN(AZ7) TAS TAS 5563481DCGT32.501FN(AZ7) TM4 TM4 5694047DCGT32.501LS VM1 VM1 5264692DCGT32.501RS QM3 QM3 5443890DCGT32.501RS TAS TAS 5488119DCGT32.501RS TM4 TM4 5693205DCGT32.501RS VM1 VM1 5264551DCGT32.501RS ZM3 ZM3 5979471DCGT32.501RU1 VM1 VM1 5316187DCGT32.504LS VM1 VM1 5264700DCGT32.504MFN(AM3) QM3 QM3 5508262DCGT32.504MFN(AM3) TAS TAS 5504451DCGT32.504MFN(AM3) TM4 TM4 5694633DCGT32.504MFN(AZ7) QM3 QM3 5563523DCGT32.504MFN(AZ7) TAS TAS 5563515DCGT32.504MFN(AZ7) TM4 TM4 5694062DCGT32.504MRS QM3 QM3 5476460DCGT32.504MRS TAS TAS 5488093DCGT32.504MRS TM4 TM4 5693189DCGT32.504RS VM1 VM1 5264569

Ord

er C

odes

133

Item Number Grade Order CodeVCGT2201FN(AM3) ZM3 ZM3 5374848VCGT2201FN(AZ7) QM3 QM3 5563663VCGT2201RU VM1 VM1 5332291VCGT2201RU ZM3 ZM3 5332341VCGT2204FN(AM3) VM1 VM1 5332150VCGT2204FN(AM3) ZM3 ZM3 5332143VCGT2204MFN(AM3) QM3 QM3 5486949VCGT2204MFN(AM3) VM1 VM1 5476387VCGT2204MFN(AZ7) QM3 QM3 5563630VCGT2204MRU TAS TAS 5488143VCGT2204RU VM1 VM1 5306006VCGT2204RU ZM3 ZM3 5332358VCGT2208FN(AM3) VM1 VM1 5385885VCGT2208FN(AM3) ZM3 ZM3 5347802VCGT2208MFN(AM3) QM3 QM3 5487129VCGT2208MFN(AM3) VM1 VM1 5476445VCGT2208MFN(AZ7) QM3 QM3 5563648VCGT2208MRU TAS TAS 5494729VCGT2208RU VM1 VM1 5332374VCGT2208RU ZM3 ZM3 5332366VCGT221MFN(AM3) QM3 QM3 5504444VCGT221MFN(AZ7) QM3 QM3 5563655VCGW2201H KMI KM1 5556261VCGW2204H KM1 KM1 5556279VCGW2208H KM1 KM1 5556287VCMW2204 PD1 PD1 5485453VCMW2208 PD1 PD1 5485446VCMW221 PD1 PD1 5485438VPGT2201FNAM3 TAS TAS 5511795VPGT2204MFN(AM3) QM3 QM3 5562756VPGT2204MFN(AM3) TAS TAS 5511803VPGT2208MFN(AM3) QM3 QM3 5562749

Ord

er C

odes

135

Index

Inde

x

136

IndexItem number Description Application Page Number

AOS Parts Clamp screw 46, 67ASG Parts Spring 46, 67BG Tool Holder Grooving 103BS Parts Clamp screw 56C..-MBRD Tool Holder Boring 96C..-SCLC Tool Holder Boring 98C..-SCLP Tool Holder Boring 98C..-SEXR Tool Holder Boring 97C..-STUC Tool Holder Boring 100C..-STUP Tool Holder Boring 100CCGT Insert Front turning 24CCGW Insert Front turning 24CCMT Insert Front turning Contact NTKCCMW Insert Front turning 24CH-FGV Tool Holder Grooving Contact NTKCH-GTT Tool Holder Grooving, Back turning Contact NTKCH-LBM Tool Holder Boring Contact NTKCH-SDUC Tool Holder Front turning Contact NTKCH-STUC Tool Holder Front turning Contact NTKCH-SVUP Tool Holder Front turning Contact NTKCLR Parts Wrench 125CNGG Insert Front turning 35CPGH Insert Boring 99CPGP Insert Boring 99CS0 Parts Clamp bolt (Threading) 82CSVB11 Insert Back turning 48, 117CSVC11 Insert Cut-off 57, 117CSVF11 Insert Front turning 37, 117CSVG11 Insert Grooving 69, 117CSVL Tool Holder Interchangeable tooling 37, 48, 57, 69, 78, 117CSVR Tool Holder Interchangeable tooling 37, 48, 57, 69, 78, 117CSVT11 Insert Threading 78, 117CTDP Insert Cut-off Contact NTKCTDPL Tool Holder Cut-off Contact NTKCTDPR Tool Holder Cut-off Contact NTKCTP Insert Cut-off 52, 53CTPA Insert Cut-off 52, 53CTPAL Tool Holder Cut-off 54, 55CTPAR Tool Holder Cut-off 54, 55CTPL Tool Holder Cut-off 54, 55CTPR Tool Holder Cut-off 54, 55CTPS Insert Cut-off 58CTPSR Tool Holder Cut-off 58CTPW Insert Cut-off 52, 53CTPWL Tool Holder Cut-off 54, 55CTPWR Tool Holder Cut-off 54, 55CTV Insert Cut-off 56CTVL Tool Holder Cut-off 56CTVR Tool Holder Cut-off 56CZH Insert End mill 107DCGT Insert Front turning 26DCMT Insert Front turning Contact NTKDCMW Insert Front turning 26DS-CSV Tool Holder Interchangeable tooling 37, 48, 57, 69, 78, 116

Inde

x

137

Item number Description Application Page NumberDS-FGV Tool Holder Grooving 71DS-GTT Tool Holder Grooving 66, 121DS-LBMB Tool Holder Boring 95, 122DS-PTX Tool Holder Front turning Contact NTKDS-SCL Tool Holder Front turning 25, 119DS-SDU Tool Holder Front turning 28, 119DS-SDX Tool Holder Front turning 28, 119DS-STT Tool Holder Threading Contact NTKDS-SVVPN Tool Holder Front turning 32, 120DS-SVX Tool Holder Front turning 31, 120DS-TBP Tool Holder Back turning 44, 121DS-TTP Tool Holder Threading 77, 122ERGH Insert Boring 97ERGP Insert Boring 97FBV Insert Grooving 70FGV Insert Grooving 70FGVR Tool Holder Grooving 71FSI Parts Clamp screw 82, 107GTG Insert Grooving 103GTMH32 Insert Grooving 63, 64GTMX32 Insert Grooving 62GTPA Insert Grooving 68GTPAR Tool Holder Grooving 68GTTL Tool Holder Grooving 47, 65GTTR Tool Holder Grooving 47, 65GTVWL Tool Holder Grooving 67GTVWR Tool Holder Grooving 67GVW Insert Grooving 67HLR Parts Wrench 124H-M Parts Clamp bolt (Threading) 82HY-NBH Tool Holder Boring 92LBM Insert Boring 94LBMAR Tool Holder Boring 95LBMC Insert Boring Contact NTKLBMD Insert Boring 94LBME Insert Boring Contact NTKLCL Parts Clamp Pin 34, 35LCS Parts Clamp screw 34, 35LLR Parts Wrench 124, 125LRIS Parts Clamp screw 125LR-S Parts Clamp screw 125LSC Parts Shim seat 35LSP Parts Spring 35LW Parts Wrench 11, 34, 35MBL Insert Boring 96NBH Tool Holder Boring Contact NTKPCLNR/L Tool Holder Front turning 35PTANR/L Tool Holder Front turning Contact NTKPTLNR/L Tool Holder Front turning Contact NTKPTXNR Tool Holder Front turning 34REZ Tool Holder End mill 107RLR Parts Wrench 124, 125S..-MBRD Tool Holder Boring 96S..-SCLC Tool Holder Boring 98

Inde

x

138

IndexItem number Description Application Page Number

S..-SCLP Tool Holder Boring 98S..-SEXR Tool Holder Boring 97S..-STUC Tool Holder Boring 100S..-STUP Tool Holder Boring 100S60Z-1267 Tool Holder Threading (Thread whirling) Contact NTKSBG Insert Boring, Grooving 90SBT Insert Boring, Theading 91SCAC Tool Holder Front turning Contact NTKSCLC Tool Holder Front turning 25SDJC Tool Holder Front turning 27SDNCN Tool Holder Front turning 27SDXC Tool Holder Front turning Contact NTKSHFB Insert Boring 89SHFS Insert Boring 88SS-DSU-SK Tool Holder DS sleeve 11STAC Tool Holder Front turning 33SVAC Tool Holder Front turning 31SVJC Tool Holder Front turning 31SVVC Tool Holder Front turning 31SVXP Tool Holder Front turning 32T- Parts Wrench 82TB32 Insert Back turning 46TB42, 43 Insert Back turning 46TBMH32 Insert Back turning 47TBP Insert Back turning 42TBPA Insert Back turning 43TBPL Tool Holder Back turning 42TBPR Tool Holder Back turning 42TBR Tool Holder Back turning 46TBTR Tool Holder Back turning 46TBVC Insert Back turning 45TBVCR Tool Holder Back turning 45TCGH Insert Boring 101TCGP Insert Boring 101TCGT Insert Front turning 33TCGW Insert Front turning 33TF33 Insert Front turning 36TFD Insert Front turning 26TFTR Tool Holder Front turning 36TFV Insert Front turning 30TMG32 Insert Grooving 64TNGG Insert Front turning 34TPGH Insert Boring 101TPGP Insert Boring 101TTP Insert Threading 76TTPL Tool Holder Threading 77TTPR Tool Holder Threading 77TW Insert Threading 9, 81TWC Tool Holder Threading 82VCET Insert Front turning 30VCGT Insert Front turning 30VCMW Insert Front turning 30VPGT Insert Front turning 32XX2815 Parts Wrench 124

Inde

x

139

Item number Description Application Page NumberY-CTPAR Tool Holder Back turning 44, 113Y-GTPAR Tool Holder Grooving 68, 114Y-GTTR Tool Holder Grooving 66, 114Y-SDJCR Tool Holder Front turning 29, 112Y-SDNCN Tool Holder Front turning 29, 112Y-SVJCR Tool Holder Front turning 113Y-TBPR Tool Holder Back turning 44, 113

Inde

x

www.youtube.com/ntkcuttingtoolswww.ntkcuttingtools.com

Sharp people

　　 Sharp ideas

　　　　 Sharp tools

Tooling fo

r Sw

iss-type Lathes

Catalog 200-S

NGK SPARK PLUGS (U.S.A), INC.Cutting Tool Sales Office

46929 Magellan Dr., Wixom, Ml 48393 U.S.A.Tel. ; +1-248-668-0100Fax ; +1-248-668-0200

NGK DO BRASIL LTDA.CERAMICA E VELAS DE IGNICAO

Estrada Mogi-Salesopolis, km 09 Bairro Cocuera,Mogi das Cruzes (SP), Brazil

Tel. ; +55-11-4793-9092Fax ; +55-11-4793-8270

NGK SPARK PLUGS (U.K), LTDMaylands Avenue, Hemel

Hempstead, Herts, HP24SD, U.K.Tel. ; +44 1442-281-000Fax ; +44 1442-281-080

NTK TECHNICAL CERAMICSKOREA CO.,LTD.

680-14 Kojan-Dong, Namdong-kuIncheon, Korea

Tel. ; +82-32-815-6763Fax ; +82-32-815-6762

NGK Spark Plug (Shanghai) Co., Ltd.No.736 Songsheng Road SongjiangIndustrial Zone, Shanghai 201613,

The People's Republic of ChinaTel. ; +86-21-63857652Fax ; +86-21-63853690

NGK SPARK PLUG EUROPE GmbHHarkortstr.41

40880 Ratingen, GermanyTel. ; +49 2102 974-350Fax ; +49 2102 974-399

NTK Cutting ToolsItaly Liaison OfficeVia delle Azalee, 15

20090 Buccinasco (MI), ItalyTel. ; +39.02.488.86.91 Fax ; +39.02.488.42.717

NGK SPARK PLUGS(THAILAND) CO.,LTD.

700/864 Moo1, Panthong sub-district,Panthong District, Chonburi

20160, ThailandTel. ; +66-38-185-306Fax ; +66-38-185-316

NGK SPARK PLUG CO.,LTD.Technical Ceramics Group Cutting Tool

Overseas Sales & Marketing 2808, Iwasaki, Komaki, Aichi

485-8510, JapanTel. ; +81-568-76-1538Fax ; +81-568-76-1288

SPARK PLUGS (USA), INC.

DISTRIBUTED BY

【NOV.,2011】

NTK Cutting ToolsDivision of NGK Spark Plugs USA46929 Magellan Drive, Wixom, MI 48393, U.S.A.Phone: 248-668-0100 Fax: 248-668-0200Toll Free: 866-900-9800

www.ntkcuttingtools.comwww.youtube.com/ntkcuttingtools

SSﾊﾞｲﾄｶﾀﾛｸﾞ11_英語版_ﾚﾀｰｻｲｽﾞ_表紙.indd 1 2012/07/18 10:29:55

sharp people sharp ideas sharp tools - ntk cutting tools ... duo 4 versatile double-ended id...

Documents